/*
 * arch/arm/mm/cache-l2x0.c - L210/L220 cache controller support
 *
 * Copyright (C) 2007 ARM Limited
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 */
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/io.h>

#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>

#define CACHE_LINE_SIZE		32

static void __iomem *l2x0_base;
static DEFINE_SPINLOCK(l2x0_lock);

static inline void sync_writel(unsigned long val, unsigned long reg,
			       unsigned long complete_mask)
{
	unsigned long flags;

	spin_lock_irqsave(&l2x0_lock, flags);
	writel(val, l2x0_base + reg);
	/* wait for the operation to complete */
	while (readl(l2x0_base + reg) & complete_mask)
		;
	spin_unlock_irqrestore(&l2x0_lock, flags);
}

static inline void cache_sync(void)
{
	sync_writel(0, L2X0_CACHE_SYNC, 1);
}

static inline void l2x0_inv_all(void)
{
	/* invalidate all ways */
	sync_writel(0xff, L2X0_INV_WAY, 0xff);
	cache_sync();
}

static void l2x0_inv_range(unsigned long start, unsigned long end)
{
	unsigned long addr;

	if (start & (CACHE_LINE_SIZE - 1)) {
		start &= ~(CACHE_LINE_SIZE - 1);
		sync_writel(start, L2X0_CLEAN_INV_LINE_PA, 1);
		start += CACHE_LINE_SIZE;
	}

	if (end & (CACHE_LINE_SIZE - 1)) {
		end &= ~(CACHE_LINE_SIZE - 1);
		sync_writel(end, L2X0_CLEAN_INV_LINE_PA, 1);
	}

	for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
		sync_writel(addr, L2X0_INV_LINE_PA, 1);
	cache_sync();
}

static void l2x0_clean_range(unsigned long start, unsigned long end)
{
	unsigned long addr;

	start &= ~(CACHE_LINE_SIZE - 1);
	for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
		sync_writel(addr, L2X0_CLEAN_LINE_PA, 1);
	cache_sync();
}

static void l2x0_flush_range(unsigned long start, unsigned long end)
{
	unsigned long addr;

	start &= ~(CACHE_LINE_SIZE - 1);
	for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
		sync_writel(addr, L2X0_CLEAN_INV_LINE_PA, 1);
	cache_sync();
}

void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
{
	__u32 aux;

	l2x0_base = base;

	/*
	 * Check if l2x0 controller is already enabled.
	 * If you are booting from non-secure mode
	 * accessing the below registers will fault.
	 */
	if (!(readl(l2x0_base + L2X0_CTRL) & 1)) {

		/* l2x0 controller is disabled */

		aux = readl(l2x0_base + L2X0_AUX_CTRL);
		aux &= aux_mask;
		aux |= aux_val;
		writel(aux, l2x0_base + L2X0_AUX_CTRL);

		l2x0_inv_all();

		/* enable L2X0 */
		writel(1, l2x0_base + L2X0_CTRL);
	}

	outer_cache.inv_range = l2x0_inv_range;
	outer_cache.clean_range = l2x0_clean_range;
	outer_cache.flush_range = l2x0_flush_range;

	printk(KERN_INFO "L2X0 cache controller enabled\n");
}