| /* |
| * extcon-arizona.c - Extcon driver Wolfson Arizona devices |
| * |
| * Copyright (C) 2012 Wolfson Microelectronics plc |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/err.h> |
| #include <linux/gpio.h> |
| #include <linux/input.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/extcon.h> |
| |
| #include <linux/mfd/arizona/core.h> |
| #include <linux/mfd/arizona/pdata.h> |
| #include <linux/mfd/arizona/registers.h> |
| |
| #define ARIZONA_NUM_BUTTONS 6 |
| |
| struct arizona_extcon_info { |
| struct device *dev; |
| struct arizona *arizona; |
| struct mutex lock; |
| struct regulator *micvdd; |
| struct input_dev *input; |
| |
| int micd_mode; |
| const struct arizona_micd_config *micd_modes; |
| int micd_num_modes; |
| |
| bool micd_reva; |
| |
| bool mic; |
| bool detecting; |
| int jack_flips; |
| |
| struct extcon_dev edev; |
| }; |
| |
| static const struct arizona_micd_config micd_default_modes[] = { |
| { ARIZONA_ACCDET_SRC, 1 << ARIZONA_MICD_BIAS_SRC_SHIFT, 0 }, |
| { 0, 2 << ARIZONA_MICD_BIAS_SRC_SHIFT, 1 }, |
| }; |
| |
| static struct { |
| u16 status; |
| int report; |
| } arizona_lvl_to_key[ARIZONA_NUM_BUTTONS] = { |
| { 0x1, BTN_0 }, |
| { 0x2, BTN_1 }, |
| { 0x4, BTN_2 }, |
| { 0x8, BTN_3 }, |
| { 0x10, BTN_4 }, |
| { 0x20, BTN_5 }, |
| }; |
| |
| #define ARIZONA_CABLE_MECHANICAL 0 |
| #define ARIZONA_CABLE_MICROPHONE 1 |
| #define ARIZONA_CABLE_HEADPHONE 2 |
| |
| static const char *arizona_cable[] = { |
| "Mechanical", |
| "Microphone", |
| "Headphone", |
| NULL, |
| }; |
| |
| static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode) |
| { |
| struct arizona *arizona = info->arizona; |
| |
| gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio, |
| info->micd_modes[mode].gpio); |
| regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_BIAS_SRC_MASK, |
| info->micd_modes[mode].bias); |
| regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, |
| ARIZONA_ACCDET_SRC, info->micd_modes[mode].src); |
| |
| info->micd_mode = mode; |
| |
| dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode); |
| } |
| |
| static void arizona_start_mic(struct arizona_extcon_info *info) |
| { |
| struct arizona *arizona = info->arizona; |
| bool change; |
| int ret; |
| |
| info->detecting = true; |
| info->mic = false; |
| info->jack_flips = 0; |
| |
| /* Microphone detection can't use idle mode */ |
| pm_runtime_get(info->dev); |
| |
| ret = regulator_enable(info->micvdd); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to enable MICVDD: %d\n", |
| ret); |
| } |
| |
| if (info->micd_reva) { |
| regmap_write(arizona->regmap, 0x80, 0x3); |
| regmap_write(arizona->regmap, 0x294, 0); |
| regmap_write(arizona->regmap, 0x80, 0x0); |
| } |
| |
| regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_ENA, ARIZONA_MICD_ENA, |
| &change); |
| if (!change) { |
| regulator_disable(info->micvdd); |
| pm_runtime_put_autosuspend(info->dev); |
| } |
| } |
| |
| static void arizona_stop_mic(struct arizona_extcon_info *info) |
| { |
| struct arizona *arizona = info->arizona; |
| bool change; |
| |
| regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_ENA, 0, |
| &change); |
| |
| if (info->micd_reva) { |
| regmap_write(arizona->regmap, 0x80, 0x3); |
| regmap_write(arizona->regmap, 0x294, 2); |
| regmap_write(arizona->regmap, 0x80, 0x0); |
| } |
| |
| if (change) { |
| regulator_disable(info->micvdd); |
| pm_runtime_mark_last_busy(info->dev); |
| pm_runtime_put_autosuspend(info->dev); |
| } |
| } |
| |
| static irqreturn_t arizona_micdet(int irq, void *data) |
| { |
| struct arizona_extcon_info *info = data; |
| struct arizona *arizona = info->arizona; |
| unsigned int val, lvl; |
| int ret, i; |
| |
| mutex_lock(&info->lock); |
| |
| ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_3, &val); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to read MICDET: %d\n", ret); |
| return IRQ_NONE; |
| } |
| |
| dev_dbg(arizona->dev, "MICDET: %x\n", val); |
| |
| if (!(val & ARIZONA_MICD_VALID)) { |
| dev_warn(arizona->dev, "Microphone detection state invalid\n"); |
| mutex_unlock(&info->lock); |
| return IRQ_NONE; |
| } |
| |
| /* Due to jack detect this should never happen */ |
| if (!(val & ARIZONA_MICD_STS)) { |
| dev_warn(arizona->dev, "Detected open circuit\n"); |
| info->detecting = false; |
| goto handled; |
| } |
| |
| /* If we got a high impedence we should have a headset, report it. */ |
| if (info->detecting && (val & 0x400)) { |
| ret = extcon_update_state(&info->edev, |
| 1 << ARIZONA_CABLE_MICROPHONE | |
| 1 << ARIZONA_CABLE_HEADPHONE, |
| 1 << ARIZONA_CABLE_MICROPHONE | |
| 1 << ARIZONA_CABLE_HEADPHONE); |
| |
| if (ret != 0) |
| dev_err(arizona->dev, "Headset report failed: %d\n", |
| ret); |
| |
| info->mic = true; |
| info->detecting = false; |
| goto handled; |
| } |
| |
| /* If we detected a lower impedence during initial startup |
| * then we probably have the wrong polarity, flip it. Don't |
| * do this for the lowest impedences to speed up detection of |
| * plain headphones. If both polarities report a low |
| * impedence then give up and report headphones. |
| */ |
| if (info->detecting && (val & 0x3f8)) { |
| info->jack_flips++; |
| |
| if (info->jack_flips >= info->micd_num_modes) { |
| dev_dbg(arizona->dev, "Detected headphone\n"); |
| info->detecting = false; |
| arizona_stop_mic(info); |
| |
| ret = extcon_set_cable_state_(&info->edev, |
| ARIZONA_CABLE_HEADPHONE, |
| true); |
| if (ret != 0) |
| dev_err(arizona->dev, |
| "Headphone report failed: %d\n", |
| ret); |
| } else { |
| info->micd_mode++; |
| if (info->micd_mode == info->micd_num_modes) |
| info->micd_mode = 0; |
| arizona_extcon_set_mode(info, info->micd_mode); |
| |
| info->jack_flips++; |
| } |
| |
| goto handled; |
| } |
| |
| /* |
| * If we're still detecting and we detect a short then we've |
| * got a headphone. Otherwise it's a button press. |
| */ |
| if (val & 0x3fc) { |
| if (info->mic) { |
| dev_dbg(arizona->dev, "Mic button detected\n"); |
| |
| lvl = val & ARIZONA_MICD_LVL_MASK; |
| lvl >>= ARIZONA_MICD_LVL_SHIFT; |
| |
| for (i = 0; i < ARIZONA_NUM_BUTTONS; i++) |
| if (lvl & arizona_lvl_to_key[i].status) |
| input_report_key(info->input, |
| arizona_lvl_to_key[i].report, |
| 1); |
| input_sync(info->input); |
| |
| } else if (info->detecting) { |
| dev_dbg(arizona->dev, "Headphone detected\n"); |
| info->detecting = false; |
| arizona_stop_mic(info); |
| |
| ret = extcon_set_cable_state_(&info->edev, |
| ARIZONA_CABLE_HEADPHONE, |
| true); |
| if (ret != 0) |
| dev_err(arizona->dev, |
| "Headphone report failed: %d\n", |
| ret); |
| } else { |
| dev_warn(arizona->dev, "Button with no mic: %x\n", |
| val); |
| } |
| } else { |
| dev_dbg(arizona->dev, "Mic button released\n"); |
| for (i = 0; i < ARIZONA_NUM_BUTTONS; i++) |
| input_report_key(info->input, |
| arizona_lvl_to_key[i].report, 0); |
| input_sync(info->input); |
| } |
| |
| handled: |
| pm_runtime_mark_last_busy(info->dev); |
| mutex_unlock(&info->lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t arizona_jackdet(int irq, void *data) |
| { |
| struct arizona_extcon_info *info = data; |
| struct arizona *arizona = info->arizona; |
| unsigned int val; |
| int ret, i; |
| |
| pm_runtime_get_sync(info->dev); |
| |
| mutex_lock(&info->lock); |
| |
| ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to read jackdet status: %d\n", |
| ret); |
| mutex_unlock(&info->lock); |
| pm_runtime_put_autosuspend(info->dev); |
| return IRQ_NONE; |
| } |
| |
| if (val & ARIZONA_JD1_STS) { |
| dev_dbg(arizona->dev, "Detected jack\n"); |
| ret = extcon_set_cable_state_(&info->edev, |
| ARIZONA_CABLE_MECHANICAL, true); |
| |
| if (ret != 0) |
| dev_err(arizona->dev, "Mechanical report failed: %d\n", |
| ret); |
| |
| arizona_start_mic(info); |
| } else { |
| dev_dbg(arizona->dev, "Detected jack removal\n"); |
| |
| arizona_stop_mic(info); |
| |
| for (i = 0; i < ARIZONA_NUM_BUTTONS; i++) |
| input_report_key(info->input, |
| arizona_lvl_to_key[i].report, 0); |
| input_sync(info->input); |
| |
| ret = extcon_update_state(&info->edev, 0xffffffff, 0); |
| if (ret != 0) |
| dev_err(arizona->dev, "Removal report failed: %d\n", |
| ret); |
| } |
| |
| mutex_unlock(&info->lock); |
| |
| pm_runtime_mark_last_busy(info->dev); |
| pm_runtime_put_autosuspend(info->dev); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int arizona_extcon_probe(struct platform_device *pdev) |
| { |
| struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); |
| struct arizona_pdata *pdata; |
| struct arizona_extcon_info *info; |
| int ret, mode, i; |
| |
| pdata = dev_get_platdata(arizona->dev); |
| |
| info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); |
| if (!info) { |
| dev_err(&pdev->dev, "Failed to allocate memory\n"); |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| info->micvdd = devm_regulator_get(arizona->dev, "MICVDD"); |
| if (IS_ERR(info->micvdd)) { |
| ret = PTR_ERR(info->micvdd); |
| dev_err(arizona->dev, "Failed to get MICVDD: %d\n", ret); |
| goto err; |
| } |
| |
| mutex_init(&info->lock); |
| info->arizona = arizona; |
| info->dev = &pdev->dev; |
| info->detecting = true; |
| platform_set_drvdata(pdev, info); |
| |
| switch (arizona->type) { |
| case WM5102: |
| switch (arizona->rev) { |
| case 0: |
| info->micd_reva = true; |
| break; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| info->edev.name = "Headset Jack"; |
| info->edev.supported_cable = arizona_cable; |
| |
| ret = extcon_dev_register(&info->edev, arizona->dev); |
| if (ret < 0) { |
| dev_err(arizona->dev, "extcon_dev_register() failed: %d\n", |
| ret); |
| goto err; |
| } |
| |
| if (pdata->num_micd_configs) { |
| info->micd_modes = pdata->micd_configs; |
| info->micd_num_modes = pdata->num_micd_configs; |
| } else { |
| info->micd_modes = micd_default_modes; |
| info->micd_num_modes = ARRAY_SIZE(micd_default_modes); |
| } |
| |
| if (arizona->pdata.micd_pol_gpio > 0) { |
| if (info->micd_modes[0].gpio) |
| mode = GPIOF_OUT_INIT_HIGH; |
| else |
| mode = GPIOF_OUT_INIT_LOW; |
| |
| ret = devm_gpio_request_one(&pdev->dev, |
| arizona->pdata.micd_pol_gpio, |
| mode, |
| "MICD polarity"); |
| if (ret != 0) { |
| dev_err(arizona->dev, "Failed to request GPIO%d: %d\n", |
| arizona->pdata.micd_pol_gpio, ret); |
| goto err_register; |
| } |
| } |
| |
| arizona_extcon_set_mode(info, 0); |
| |
| info->input = input_allocate_device(); |
| if (!info->input) { |
| dev_err(arizona->dev, "Can't allocate input dev\n"); |
| ret = -ENOMEM; |
| goto err_register; |
| } |
| |
| for (i = 0; i < ARIZONA_NUM_BUTTONS; i++) |
| input_set_capability(info->input, EV_KEY, |
| arizona_lvl_to_key[i].report); |
| info->input->name = "Headset"; |
| info->input->phys = "arizona/extcon"; |
| info->input->dev.parent = &pdev->dev; |
| |
| pm_runtime_enable(&pdev->dev); |
| pm_runtime_idle(&pdev->dev); |
| pm_runtime_get_sync(&pdev->dev); |
| |
| ret = arizona_request_irq(arizona, ARIZONA_IRQ_JD_RISE, |
| "JACKDET rise", arizona_jackdet, info); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n", |
| ret); |
| goto err_input; |
| } |
| |
| ret = arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_RISE, 1); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to set JD rise IRQ wake: %d\n", |
| ret); |
| goto err_rise; |
| } |
| |
| ret = arizona_request_irq(arizona, ARIZONA_IRQ_JD_FALL, |
| "JACKDET fall", arizona_jackdet, info); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to get JD fall IRQ: %d\n", ret); |
| goto err_rise_wake; |
| } |
| |
| ret = arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_FALL, 1); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to set JD fall IRQ wake: %d\n", |
| ret); |
| goto err_fall; |
| } |
| |
| ret = arizona_request_irq(arizona, ARIZONA_IRQ_MICDET, |
| "MICDET", arizona_micdet, info); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to get MICDET IRQ: %d\n", ret); |
| goto err_fall_wake; |
| } |
| |
| regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, |
| ARIZONA_MICD_BIAS_STARTTIME_MASK | |
| ARIZONA_MICD_RATE_MASK, |
| 7 << ARIZONA_MICD_BIAS_STARTTIME_SHIFT | |
| 8 << ARIZONA_MICD_RATE_SHIFT); |
| |
| arizona_clk32k_enable(arizona); |
| regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_DEBOUNCE, |
| ARIZONA_JD1_DB, ARIZONA_JD1_DB); |
| regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, |
| ARIZONA_JD1_ENA, ARIZONA_JD1_ENA); |
| |
| ret = regulator_allow_bypass(info->micvdd, true); |
| if (ret != 0) |
| dev_warn(arizona->dev, "Failed to set MICVDD to bypass: %d\n", |
| ret); |
| |
| pm_runtime_put(&pdev->dev); |
| |
| ret = input_register_device(info->input); |
| if (ret) { |
| dev_err(&pdev->dev, "Can't register input device: %d\n", ret); |
| goto err_micdet; |
| } |
| |
| return 0; |
| |
| err_micdet: |
| arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info); |
| err_fall_wake: |
| arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_FALL, 0); |
| err_fall: |
| arizona_free_irq(arizona, ARIZONA_IRQ_JD_FALL, info); |
| err_rise_wake: |
| arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_RISE, 0); |
| err_rise: |
| arizona_free_irq(arizona, ARIZONA_IRQ_JD_RISE, info); |
| err_input: |
| input_free_device(info->input); |
| err_register: |
| pm_runtime_disable(&pdev->dev); |
| extcon_dev_unregister(&info->edev); |
| err: |
| return ret; |
| } |
| |
| static int arizona_extcon_remove(struct platform_device *pdev) |
| { |
| struct arizona_extcon_info *info = platform_get_drvdata(pdev); |
| struct arizona *arizona = info->arizona; |
| |
| pm_runtime_disable(&pdev->dev); |
| |
| arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_RISE, 0); |
| arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_FALL, 0); |
| arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info); |
| arizona_free_irq(arizona, ARIZONA_IRQ_JD_RISE, info); |
| arizona_free_irq(arizona, ARIZONA_IRQ_JD_FALL, info); |
| regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, |
| ARIZONA_JD1_ENA, 0); |
| arizona_clk32k_disable(arizona); |
| input_unregister_device(info->input); |
| extcon_dev_unregister(&info->edev); |
| |
| return 0; |
| } |
| |
| static struct platform_driver arizona_extcon_driver = { |
| .driver = { |
| .name = "arizona-extcon", |
| .owner = THIS_MODULE, |
| }, |
| .probe = arizona_extcon_probe, |
| .remove = arizona_extcon_remove, |
| }; |
| |
| module_platform_driver(arizona_extcon_driver); |
| |
| MODULE_DESCRIPTION("Arizona Extcon driver"); |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:extcon-arizona"); |