[libata sata_promise] Do not attempt to use SATA phy on PATA controllers
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index 919fb31..ad31b8a 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -79,7 +79,8 @@
static void pdc_eng_timeout(struct ata_port *ap);
static int pdc_port_start(struct ata_port *ap);
static void pdc_port_stop(struct ata_port *ap);
-static void pdc_phy_reset(struct ata_port *ap);
+static void pdc_pata_phy_reset(struct ata_port *ap);
+static void pdc_sata_phy_reset(struct ata_port *ap);
static void pdc_qc_prep(struct ata_queued_cmd *qc);
static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf);
static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf);
@@ -106,19 +107,22 @@
.ordered_flush = 1,
};
-static struct ata_port_operations pdc_ata_ops = {
+static struct ata_port_operations pdc_sata_ops = {
.port_disable = ata_port_disable,
.tf_load = pdc_tf_load_mmio,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = pdc_exec_command_mmio,
.dev_select = ata_std_dev_select,
- .phy_reset = pdc_phy_reset,
+
+ .phy_reset = pdc_sata_phy_reset,
+
.qc_prep = pdc_qc_prep,
.qc_issue = pdc_qc_issue_prot,
.eng_timeout = pdc_eng_timeout,
.irq_handler = pdc_interrupt,
.irq_clear = pdc_irq_clear,
+
.scr_read = pdc_sata_scr_read,
.scr_write = pdc_sata_scr_write,
.port_start = pdc_port_start,
@@ -126,6 +130,27 @@
.host_stop = ata_host_stop,
};
+static struct ata_port_operations pdc_pata_ops = {
+ .port_disable = ata_port_disable,
+ .tf_load = pdc_tf_load_mmio,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = pdc_exec_command_mmio,
+ .dev_select = ata_std_dev_select,
+
+ .phy_reset = pdc_pata_phy_reset,
+
+ .qc_prep = pdc_qc_prep,
+ .qc_issue = pdc_qc_issue_prot,
+ .eng_timeout = pdc_eng_timeout,
+ .irq_handler = pdc_interrupt,
+ .irq_clear = pdc_irq_clear,
+
+ .port_start = pdc_port_start,
+ .port_stop = pdc_port_stop,
+ .host_stop = ata_host_stop,
+};
+
static struct ata_port_info pdc_port_info[] = {
/* board_2037x */
{
@@ -135,7 +160,7 @@
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
- .port_ops = &pdc_ata_ops,
+ .port_ops = &pdc_sata_ops,
},
/* board_20319 */
@@ -146,7 +171,7 @@
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
- .port_ops = &pdc_ata_ops,
+ .port_ops = &pdc_sata_ops,
},
/* board_20619 */
@@ -157,7 +182,7 @@
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
- .port_ops = &pdc_ata_ops,
+ .port_ops = &pdc_pata_ops,
},
};
@@ -268,12 +293,23 @@
readl(mmio); /* flush */
}
-static void pdc_phy_reset(struct ata_port *ap)
+static void pdc_sata_phy_reset(struct ata_port *ap)
{
pdc_reset_port(ap);
sata_phy_reset(ap);
}
+static void pdc_pata_phy_reset(struct ata_port *ap)
+{
+ /* FIXME: add cable detect. Don't assume 40-pin cable */
+ ap->cbl = ATA_CBL_PATA40;
+ ap->udma_mask &= ATA_UDMA_MASK_40C;
+
+ pdc_reset_port(ap);
+ ata_port_probe(ap);
+ ata_bus_reset(ap);
+}
+
static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
if (sc_reg > SCR_CONTROL)