| /* |
| * arch/arm/mach-shmobile/board-ag5evm.c |
| * |
| * Copyright (C) 2010 Takashi Yoshii <yoshii.takashi.zj@renesas.com> |
| * Copyright (C) 2009 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/pinctrl/machine.h> |
| #include <linux/pinctrl/pinconf-generic.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/regulator/fixed.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/serial_sci.h> |
| #include <linux/smsc911x.h> |
| #include <linux/gpio.h> |
| #include <linux/videodev2.h> |
| #include <linux/input.h> |
| #include <linux/input/sh_keysc.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/sh_mmcif.h> |
| #include <linux/mmc/sh_mobile_sdhi.h> |
| #include <linux/mfd/tmio.h> |
| #include <linux/sh_clk.h> |
| #include <linux/irqchip/arm-gic.h> |
| #include <video/sh_mobile_lcdc.h> |
| #include <video/sh_mipi_dsi.h> |
| #include <sound/sh_fsi.h> |
| #include <mach/hardware.h> |
| #include <mach/irqs.h> |
| #include <mach/sh73a0.h> |
| #include <mach/common.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/hardware/cache-l2x0.h> |
| #include <asm/traps.h> |
| |
| /* Dummy supplies, where voltage doesn't matter */ |
| static struct regulator_consumer_supply dummy_supplies[] = { |
| REGULATOR_SUPPLY("vddvario", "smsc911x"), |
| REGULATOR_SUPPLY("vdd33a", "smsc911x"), |
| }; |
| |
| static struct resource smsc9220_resources[] = { |
| [0] = { |
| .start = 0x14000000, |
| .end = 0x14000000 + SZ_64K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = SH73A0_PINT0_IRQ(2), /* PINTA2 */ |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct smsc911x_platform_config smsc9220_platdata = { |
| .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, |
| .phy_interface = PHY_INTERFACE_MODE_MII, |
| .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, |
| .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, |
| }; |
| |
| static struct platform_device eth_device = { |
| .name = "smsc911x", |
| .id = 0, |
| .dev = { |
| .platform_data = &smsc9220_platdata, |
| }, |
| .resource = smsc9220_resources, |
| .num_resources = ARRAY_SIZE(smsc9220_resources), |
| }; |
| |
| static struct sh_keysc_info keysc_platdata = { |
| .mode = SH_KEYSC_MODE_6, |
| .scan_timing = 3, |
| .delay = 100, |
| .keycodes = { |
| KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G, |
| KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N, |
| KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U, |
| KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, |
| KEY_SPACE, KEY_9, KEY_6, KEY_3, KEY_WAKEUP, KEY_RIGHT, \ |
| KEY_COFFEE, |
| KEY_0, KEY_8, KEY_5, KEY_2, KEY_DOWN, KEY_ENTER, KEY_UP, |
| KEY_KPASTERISK, KEY_7, KEY_4, KEY_1, KEY_STOP, KEY_LEFT, \ |
| KEY_COMPUTER, |
| }, |
| }; |
| |
| static struct resource keysc_resources[] = { |
| [0] = { |
| .name = "KEYSC", |
| .start = 0xe61b0000, |
| .end = 0xe61b0098 - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = gic_spi(71), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device keysc_device = { |
| .name = "sh_keysc", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(keysc_resources), |
| .resource = keysc_resources, |
| .dev = { |
| .platform_data = &keysc_platdata, |
| }, |
| }; |
| |
| /* FSI A */ |
| static struct resource fsi_resources[] = { |
| [0] = { |
| .name = "FSI", |
| .start = 0xEC230000, |
| .end = 0xEC230400 - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = gic_spi(146), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device fsi_device = { |
| .name = "sh_fsi2", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(fsi_resources), |
| .resource = fsi_resources, |
| }; |
| |
| /* Fixed 1.8V regulator to be used by MMCIF */ |
| static struct regulator_consumer_supply fixed1v8_power_consumers[] = |
| { |
| REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), |
| REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), |
| }; |
| |
| static struct resource sh_mmcif_resources[] = { |
| [0] = { |
| .name = "MMCIF", |
| .start = 0xe6bd0000, |
| .end = 0xe6bd00ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = gic_spi(141), |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| .start = gic_spi(140), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct sh_mmcif_plat_data sh_mmcif_platdata = { |
| .sup_pclk = 0, |
| .ocr = MMC_VDD_165_195, |
| .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, |
| .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, |
| .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, |
| }; |
| |
| static struct platform_device mmc_device = { |
| .name = "sh_mmcif", |
| .id = 0, |
| .dev = { |
| .dma_mask = NULL, |
| .coherent_dma_mask = 0xffffffff, |
| .platform_data = &sh_mmcif_platdata, |
| }, |
| .num_resources = ARRAY_SIZE(sh_mmcif_resources), |
| .resource = sh_mmcif_resources, |
| }; |
| |
| /* IrDA */ |
| static struct resource irda_resources[] = { |
| [0] = { |
| .start = 0xE6D00000, |
| .end = 0xE6D01FD4 - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = gic_spi(95), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device irda_device = { |
| .name = "sh_irda", |
| .id = 0, |
| .resource = irda_resources, |
| .num_resources = ARRAY_SIZE(irda_resources), |
| }; |
| |
| /* MIPI-DSI */ |
| static struct resource mipidsi0_resources[] = { |
| [0] = { |
| .name = "DSI0", |
| .start = 0xfeab0000, |
| .end = 0xfeab3fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .name = "DSI0", |
| .start = 0xfeab4000, |
| .end = 0xfeab7fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static int sh_mipi_set_dot_clock(struct platform_device *pdev, |
| void __iomem *base, |
| int enable) |
| { |
| struct clk *pck, *phy; |
| int ret; |
| |
| pck = clk_get(&pdev->dev, "dsip_clk"); |
| if (IS_ERR(pck)) { |
| ret = PTR_ERR(pck); |
| goto sh_mipi_set_dot_clock_pck_err; |
| } |
| |
| phy = clk_get(&pdev->dev, "dsiphy_clk"); |
| if (IS_ERR(phy)) { |
| ret = PTR_ERR(phy); |
| goto sh_mipi_set_dot_clock_phy_err; |
| } |
| |
| if (enable) { |
| clk_set_rate(pck, clk_round_rate(pck, 24000000)); |
| clk_set_rate(phy, clk_round_rate(pck, 510000000)); |
| clk_enable(pck); |
| clk_enable(phy); |
| } else { |
| clk_disable(pck); |
| clk_disable(phy); |
| } |
| |
| ret = 0; |
| |
| clk_put(phy); |
| sh_mipi_set_dot_clock_phy_err: |
| clk_put(pck); |
| sh_mipi_set_dot_clock_pck_err: |
| return ret; |
| } |
| |
| static struct sh_mipi_dsi_info mipidsi0_info = { |
| .data_format = MIPI_RGB888, |
| .channel = LCDC_CHAN_MAINLCD, |
| .lane = 2, |
| .vsynw_offset = 20, |
| .clksrc = 1, |
| .flags = SH_MIPI_DSI_HSABM | |
| SH_MIPI_DSI_SYNC_PULSES_MODE | |
| SH_MIPI_DSI_HSbyteCLK, |
| .set_dot_clock = sh_mipi_set_dot_clock, |
| }; |
| |
| static struct platform_device mipidsi0_device = { |
| .name = "sh-mipi-dsi", |
| .num_resources = ARRAY_SIZE(mipidsi0_resources), |
| .resource = mipidsi0_resources, |
| .id = 0, |
| .dev = { |
| .platform_data = &mipidsi0_info, |
| }, |
| }; |
| |
| static unsigned char lcd_backlight_seq[3][2] = { |
| { 0x04, 0x07 }, |
| { 0x23, 0x80 }, |
| { 0x03, 0x01 }, |
| }; |
| |
| static int lcd_backlight_set_brightness(int brightness) |
| { |
| struct i2c_adapter *adap; |
| struct i2c_msg msg; |
| unsigned int i; |
| int ret; |
| |
| if (brightness == 0) { |
| /* Reset the chip */ |
| gpio_set_value(235, 0); |
| mdelay(24); |
| gpio_set_value(235, 1); |
| return 0; |
| } |
| |
| adap = i2c_get_adapter(1); |
| if (adap == NULL) |
| return -ENODEV; |
| |
| for (i = 0; i < ARRAY_SIZE(lcd_backlight_seq); i++) { |
| msg.addr = 0x6d; |
| msg.buf = &lcd_backlight_seq[i][0]; |
| msg.len = 2; |
| msg.flags = 0; |
| |
| ret = i2c_transfer(adap, &msg, 1); |
| if (ret < 0) |
| break; |
| } |
| |
| i2c_put_adapter(adap); |
| return ret < 0 ? ret : 0; |
| } |
| |
| /* LCDC0 */ |
| static const struct fb_videomode lcdc0_modes[] = { |
| { |
| .name = "R63302(QHD)", |
| .xres = 544, |
| .yres = 961, |
| .left_margin = 72, |
| .right_margin = 600, |
| .hsync_len = 16, |
| .upper_margin = 8, |
| .lower_margin = 8, |
| .vsync_len = 2, |
| .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, |
| }, |
| }; |
| |
| static struct sh_mobile_lcdc_info lcdc0_info = { |
| .clock_source = LCDC_CLK_PERIPHERAL, |
| .ch[0] = { |
| .chan = LCDC_CHAN_MAINLCD, |
| .interface_type = RGB24, |
| .clock_divider = 1, |
| .flags = LCDC_FLAGS_DWPOL, |
| .fourcc = V4L2_PIX_FMT_RGB565, |
| .lcd_modes = lcdc0_modes, |
| .num_modes = ARRAY_SIZE(lcdc0_modes), |
| .panel_cfg = { |
| .width = 44, |
| .height = 79, |
| }, |
| .bl_info = { |
| .name = "sh_mobile_lcdc_bl", |
| .max_brightness = 1, |
| .set_brightness = lcd_backlight_set_brightness, |
| }, |
| .tx_dev = &mipidsi0_device, |
| } |
| }; |
| |
| static struct resource lcdc0_resources[] = { |
| [0] = { |
| .name = "LCDC0", |
| .start = 0xfe940000, /* P4-only space */ |
| .end = 0xfe943fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = intcs_evt2irq(0x580), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device lcdc0_device = { |
| .name = "sh_mobile_lcdc_fb", |
| .num_resources = ARRAY_SIZE(lcdc0_resources), |
| .resource = lcdc0_resources, |
| .id = 0, |
| .dev = { |
| .platform_data = &lcdc0_info, |
| .coherent_dma_mask = ~0, |
| }, |
| }; |
| |
| /* Fixed 2.8V regulators to be used by SDHI0 */ |
| static struct regulator_consumer_supply fixed2v8_power_consumers[] = |
| { |
| REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), |
| REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), |
| }; |
| |
| /* SDHI0 */ |
| static struct sh_mobile_sdhi_info sdhi0_info = { |
| .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, |
| .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, |
| .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, |
| .tmio_caps = MMC_CAP_SD_HIGHSPEED, |
| .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, |
| .cd_gpio = 251, |
| }; |
| |
| static struct resource sdhi0_resources[] = { |
| [0] = { |
| .name = "SDHI0", |
| .start = 0xee100000, |
| .end = 0xee1000ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, |
| .start = gic_spi(83), |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| .name = SH_MOBILE_SDHI_IRQ_SDCARD, |
| .start = gic_spi(84), |
| .flags = IORESOURCE_IRQ, |
| }, |
| [3] = { |
| .name = SH_MOBILE_SDHI_IRQ_SDIO, |
| .start = gic_spi(85), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device sdhi0_device = { |
| .name = "sh_mobile_sdhi", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(sdhi0_resources), |
| .resource = sdhi0_resources, |
| .dev = { |
| .platform_data = &sdhi0_info, |
| }, |
| }; |
| |
| /* Fixed 3.3V regulator to be used by SDHI1 */ |
| static struct regulator_consumer_supply cn4_power_consumers[] = |
| { |
| REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), |
| REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), |
| }; |
| |
| static struct regulator_init_data cn4_power_init_data = { |
| .constraints = { |
| .valid_ops_mask = REGULATOR_CHANGE_STATUS, |
| }, |
| .num_consumer_supplies = ARRAY_SIZE(cn4_power_consumers), |
| .consumer_supplies = cn4_power_consumers, |
| }; |
| |
| static struct fixed_voltage_config cn4_power_info = { |
| .supply_name = "CN4 SD/MMC Vdd", |
| .microvolts = 3300000, |
| .gpio = 114, |
| .enable_high = 1, |
| .init_data = &cn4_power_init_data, |
| }; |
| |
| static struct platform_device cn4_power = { |
| .name = "reg-fixed-voltage", |
| .id = 2, |
| .dev = { |
| .platform_data = &cn4_power_info, |
| }, |
| }; |
| |
| static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) |
| { |
| static int power_gpio = -EINVAL; |
| |
| if (power_gpio < 0) { |
| int ret = gpio_request_one(114, GPIOF_OUT_INIT_LOW, |
| "sdhi1_power"); |
| if (!ret) |
| power_gpio = 114; |
| } |
| |
| /* |
| * If requesting the GPIO above failed, it means, that the regulator got |
| * probed and grabbed the GPIO, but we don't know, whether the sdhi |
| * driver already uses the regulator. If it doesn't, we have to toggle |
| * the GPIO ourselves, even though it is now owned by the fixed |
| * regulator driver. We have to live with the race in case the driver |
| * gets unloaded and the GPIO freed between these two steps. |
| */ |
| gpio_set_value(114, state); |
| } |
| |
| static struct sh_mobile_sdhi_info sh_sdhi1_info = { |
| .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT, |
| .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, |
| .tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
| .set_pwr = ag5evm_sdhi1_set_pwr, |
| }; |
| |
| static struct resource sdhi1_resources[] = { |
| [0] = { |
| .name = "SDHI1", |
| .start = 0xee120000, |
| .end = 0xee1200ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, |
| .start = gic_spi(87), |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| .name = SH_MOBILE_SDHI_IRQ_SDCARD, |
| .start = gic_spi(88), |
| .flags = IORESOURCE_IRQ, |
| }, |
| [3] = { |
| .name = SH_MOBILE_SDHI_IRQ_SDIO, |
| .start = gic_spi(89), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device sdhi1_device = { |
| .name = "sh_mobile_sdhi", |
| .id = 1, |
| .dev = { |
| .platform_data = &sh_sdhi1_info, |
| }, |
| .num_resources = ARRAY_SIZE(sdhi1_resources), |
| .resource = sdhi1_resources, |
| }; |
| |
| static struct platform_device *ag5evm_devices[] __initdata = { |
| &cn4_power, |
| ð_device, |
| &keysc_device, |
| &fsi_device, |
| &mmc_device, |
| &irda_device, |
| &mipidsi0_device, |
| &lcdc0_device, |
| &sdhi0_device, |
| &sdhi1_device, |
| }; |
| |
| static unsigned long pin_pullup_conf[] = { |
| PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0), |
| }; |
| |
| static const struct pinctrl_map ag5evm_pinctrl_map[] = { |
| /* FSIA */ |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", |
| "fsia_mclk_in", "fsia"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", |
| "fsia_sclk_in", "fsia"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", |
| "fsia_data_in", "fsia"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", |
| "fsia_data_out", "fsia"), |
| /* I2C2 & I2C3 */ |
| PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.2", "pfc-sh73a0", |
| "i2c2_0", "i2c2"), |
| PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0", |
| "i2c3_0", "i2c3"), |
| /* IrDA */ |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_irda.0", "pfc-sh73a0", |
| "irda_0", "irda"), |
| /* KEYSC */ |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", |
| "keysc_in8", "keysc"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", |
| "keysc_out04", "keysc"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", |
| "keysc_out5", "keysc"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", |
| "keysc_out6_0", "keysc"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", |
| "keysc_out7_0", "keysc"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", |
| "keysc_out8_0", "keysc"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", |
| "keysc_out9_2", "keysc"), |
| PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", |
| "keysc_in8", pin_pullup_conf), |
| /* MMCIF */ |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", |
| "mmc0_data8_0", "mmc0"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", |
| "mmc0_ctrl_0", "mmc0"), |
| PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0", |
| "PORT279", pin_pullup_conf), |
| PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", |
| "mmc0_data8_0", pin_pullup_conf), |
| /* SCIFA2 */ |
| PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0", |
| "scifa2_data_0", "scifa2"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0", |
| "scifa2_ctrl_0", "scifa2"), |
| /* SDHI0 (CN15 [SD I/F]) */ |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", |
| "sdhi0_data4", "sdhi0"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", |
| "sdhi0_ctrl", "sdhi0"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", |
| "sdhi0_wp", "sdhi0"), |
| /* SDHI1 (CN4 [WLAN I/F]) */ |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", |
| "sdhi1_data4", "sdhi1"), |
| PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", |
| "sdhi1_ctrl", "sdhi1"), |
| PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", |
| "sdhi1_data4", pin_pullup_conf), |
| PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", |
| "PORT263", pin_pullup_conf), |
| }; |
| |
| static void __init ag5evm_init(void) |
| { |
| regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, |
| ARRAY_SIZE(fixed1v8_power_consumers), 1800000); |
| regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers, |
| ARRAY_SIZE(fixed2v8_power_consumers), 3300000); |
| regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies)); |
| |
| pinctrl_register_mappings(ag5evm_pinctrl_map, |
| ARRAY_SIZE(ag5evm_pinctrl_map)); |
| sh73a0_pinmux_init(); |
| |
| /* enable MMCIF */ |
| gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */ |
| |
| /* enable SMSC911X */ |
| gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */ |
| gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */ |
| |
| /* LCD panel */ |
| gpio_request_one(217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */ |
| mdelay(1); |
| gpio_set_value(217, 1); |
| mdelay(100); |
| |
| /* LCD backlight controller */ |
| gpio_request_one(235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */ |
| lcd_backlight_set_brightness(0); |
| |
| #ifdef CONFIG_CACHE_L2X0 |
| /* Shared attribute override enable, 64K*8way */ |
| l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff); |
| #endif |
| sh73a0_add_standard_devices(); |
| platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices)); |
| } |
| |
| MACHINE_START(AG5EVM, "ag5evm") |
| .smp = smp_ops(sh73a0_smp_ops), |
| .map_io = sh73a0_map_io, |
| .init_early = sh73a0_add_early_devices, |
| .nr_irqs = NR_IRQS_LEGACY, |
| .init_irq = sh73a0_init_irq, |
| .init_machine = ag5evm_init, |
| .init_late = shmobile_init_late, |
| .init_time = sh73a0_earlytimer_init, |
| MACHINE_END |