| # |
| # Makefile for the linux kernel. |
| # |
| |
| obj-y := irq.o gpio.o setup.o |
| obj-m := |
| obj-n := |
| obj- := |
| |
| obj-$(CONFIG_AT91_PMC_UNIT) += clock.o |
| obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o |
| obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o |
| obj-$(CONFIG_AT91_SAM9_TIME) += at91sam926x_time.o |
| obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o |
| |
| # CPU-specific support |
| obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o at91rm9200_time.o |
| obj-$(CONFIG_SOC_AT91SAM9260) += at91sam9260.o |
| obj-$(CONFIG_SOC_AT91SAM9261) += at91sam9261.o |
| obj-$(CONFIG_SOC_AT91SAM9263) += at91sam9263.o |
| obj-$(CONFIG_SOC_AT91SAM9G45) += at91sam9g45.o |
| obj-$(CONFIG_SOC_AT91SAM9N12) += at91sam9n12.o |
| obj-$(CONFIG_SOC_AT91SAM9X5) += at91sam9x5.o |
| obj-$(CONFIG_SOC_AT91SAM9RL) += at91sam9rl.o |
| obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o |
| |
| obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o |
| obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o |
| obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o |
| obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o |
| obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl_devices.o |
| obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45_devices.o |
| obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o |
| |
| # AT91RM9200 board-specific support |
| obj-$(CONFIG_MACH_ONEARM) += board-1arm.o |
| obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o |
| obj-$(CONFIG_MACH_CSB337) += board-csb337.o |
| obj-$(CONFIG_MACH_CSB637) += board-csb637.o |
| obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o |
| obj-$(CONFIG_MACH_KB9200) += board-kb9202.o |
| obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o |
| obj-$(CONFIG_MACH_KAFA) += board-kafa.o |
| obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o |
| obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o |
| obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o |
| obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o |
| obj-$(CONFIG_MACH_ECO920) += board-eco920.o |
| obj-$(CONFIG_MACH_RSI_EWS) += board-rsi-ews.o |
| |
| # AT91SAM9260 board-specific support |
| obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o |
| obj-$(CONFIG_MACH_CAM60) += board-cam60.o |
| obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o |
| obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o |
| obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o |
| obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o |
| obj-$(CONFIG_MACH_FLEXIBITY) += board-flexibity.o |
| |
| # AT91SAM9261 board-specific support |
| obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o |
| obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o |
| |
| # AT91SAM9263 board-specific support |
| obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o |
| |
| # AT91SAM9RL board-specific support |
| obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o |
| |
| # AT91SAM9G20 board-specific support |
| obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o |
| obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o |
| obj-$(CONFIG_MACH_ACMENETUSFOXG20) += board-foxg20.o |
| obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o |
| obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o |
| obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o |
| obj-$(CONFIG_MACH_GSIA18S) += board-gsia18s.o board-stamp9g20.o |
| |
| # AT91SAM9260/AT91SAM9G20 board-specific support |
| obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o |
| |
| # AT91SAM9G45 board-specific support |
| obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o |
| |
| # AT91SAM board with device-tree |
| obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o |
| obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o |
| |
| # SAMA5 board with device-tree |
| obj-$(CONFIG_MACH_SAMA5_DT) += board-dt-sama5.o |
| |
| # AT91X40 board-specific support |
| obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o |
| |
| # Drivers |
| obj-y += leds.o |
| |
| # Power Management |
| obj-$(CONFIG_PM) += pm.o |
| obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o |
| |
| ifeq ($(CONFIG_PM_DEBUG),y) |
| CFLAGS_pm.o += -DDEBUG |
| endif |