[media] ths8200: Format adjustment
Closer inspection on exact transmitted format showed that
we needed to add 1 on vertical sync.
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
diff --git a/drivers/media/i2c/ths8200.c b/drivers/media/i2c/ths8200.c
index bcacf52..f72561e 100644
--- a/drivers/media/i2c/ths8200.c
+++ b/drivers/media/i2c/ths8200.c
@@ -318,15 +318,15 @@
(htotal(bt) >> 8) & 0x1f);
ths8200_write(sd, THS8200_DTG2_HLENGTH_HDLY_LSB, htotal(bt));
- /* v sync width transmitted */
- ths8200_write(sd, THS8200_DTG2_VLENGTH1_LSB, (bt->vsync) & 0xff);
+ /* v sync width transmitted (must add 1 to get correct output) */
+ ths8200_write(sd, THS8200_DTG2_VLENGTH1_LSB, (bt->vsync + 1) & 0xff);
ths8200_write_and_or(sd, THS8200_DTG2_VLENGTH1_MSB_VDLY1_MSB, 0x3f,
- ((bt->vsync) >> 2) & 0xc0);
+ ((bt->vsync + 1) >> 2) & 0xc0);
- /* The pixel value v sync is asserted on */
+ /* The pixel value v sync is asserted on (must add 1 to get correct output) */
ths8200_write_and_or(sd, THS8200_DTG2_VLENGTH1_MSB_VDLY1_MSB, 0xf8,
- (vtotal(bt)>>8) & 0x7);
- ths8200_write(sd, THS8200_DTG2_VDLY1_LSB, vtotal(bt));
+ ((vtotal(bt) + 1) >> 8) & 0x7);
+ ths8200_write(sd, THS8200_DTG2_VDLY1_LSB, vtotal(bt) + 1);
/* For progressive video vlength2 must be set to all 0 and vdly2 must
* be set to all 1.
@@ -336,11 +336,11 @@
ths8200_write(sd, THS8200_DTG2_VDLY2_LSB, 0xff);
/* Internal delay factors to synchronize the sync pulses and the data */
- /* Experimental values delays (hor 4, ver 1) */
- ths8200_write(sd, THS8200_DTG2_HS_IN_DLY_MSB, (htotal(bt)>>8) & 0x1f);
- ths8200_write(sd, THS8200_DTG2_HS_IN_DLY_LSB, (htotal(bt) - 4) & 0xff);
+ /* Experimental values delays (hor 0, ver 0) */
+ ths8200_write(sd, THS8200_DTG2_HS_IN_DLY_MSB, 0);
+ ths8200_write(sd, THS8200_DTG2_HS_IN_DLY_LSB, 0);
ths8200_write(sd, THS8200_DTG2_VS_IN_DLY_MSB, 0);
- ths8200_write(sd, THS8200_DTG2_VS_IN_DLY_LSB, 1);
+ ths8200_write(sd, THS8200_DTG2_VS_IN_DLY_LSB, 0);
/* Polarity of received and transmitted sync signals */
if (bt->polarities & V4L2_DV_HSYNC_POS_POL) {