| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2003, 04, 07 Ralf Baechle <ralf@linux-mips.org> |
| * Copyright (C) MIPS Technologies, Inc. |
| * written by Ralf Baechle <ralf@linux-mips.org> |
| */ |
| #ifndef _ASM_HAZARDS_H |
| #define _ASM_HAZARDS_H |
| |
| |
| #ifdef __ASSEMBLY__ |
| #define ASMMACRO(name, code...) .macro name; code; .endm |
| #else |
| |
| #define ASMMACRO(name, code...) \ |
| __asm__(".macro " #name "; " #code "; .endm"); \ |
| \ |
| static inline void name(void) \ |
| { \ |
| __asm__ __volatile__ (#name); \ |
| } |
| |
| /* |
| * MIPS R2 instruction hazard barrier. Needs to be called as a subroutine. |
| */ |
| extern void mips_ihb(void); |
| |
| #endif |
| |
| ASMMACRO(_ssnop, |
| sll $0, $0, 1 |
| ) |
| |
| ASMMACRO(_ehb, |
| sll $0, $0, 3 |
| ) |
| |
| /* |
| * TLB hazards |
| */ |
| #if defined(CONFIG_CPU_MIPSR2) |
| |
| /* |
| * MIPSR2 defines ehb for hazard avoidance |
| */ |
| |
| ASMMACRO(mtc0_tlbw_hazard, |
| _ehb |
| ) |
| ASMMACRO(tlbw_use_hazard, |
| _ehb |
| ) |
| ASMMACRO(tlb_probe_hazard, |
| _ehb |
| ) |
| ASMMACRO(irq_enable_hazard, |
| _ehb |
| ) |
| ASMMACRO(irq_disable_hazard, |
| _ehb |
| ) |
| ASMMACRO(back_to_back_c0_hazard, |
| _ehb |
| ) |
| /* |
| * gcc has a tradition of misscompiling the previous construct using the |
| * address of a label as argument to inline assembler. Gas otoh has the |
| * annoying difference between la and dla which are only usable for 32-bit |
| * rsp. 64-bit code, so can't be used without conditional compilation. |
| * The alterantive is switching the assembler to 64-bit code which happens |
| * to work right even for 32-bit code ... |
| */ |
| #define instruction_hazard() \ |
| do { \ |
| unsigned long tmp; \ |
| \ |
| __asm__ __volatile__( \ |
| " .set mips64r2 \n" \ |
| " dla %0, 1f \n" \ |
| " jr.hb %0 \n" \ |
| " .set mips0 \n" \ |
| "1: \n" \ |
| : "=r" (tmp)); \ |
| } while (0) |
| |
| #elif defined(CONFIG_CPU_R10000) |
| |
| /* |
| * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. |
| */ |
| |
| ASMMACRO(mtc0_tlbw_hazard, |
| ) |
| ASMMACRO(tlbw_use_hazard, |
| ) |
| ASMMACRO(tlb_probe_hazard, |
| ) |
| ASMMACRO(irq_enable_hazard, |
| ) |
| ASMMACRO(irq_disable_hazard, |
| ) |
| ASMMACRO(back_to_back_c0_hazard, |
| ) |
| #define instruction_hazard() do { } while (0) |
| |
| #elif defined(CONFIG_CPU_RM9000) |
| |
| /* |
| * RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent |
| * use of the JTLB for instructions should not occur for 4 cpu cycles and use |
| * for data translations should not occur for 3 cpu cycles. |
| */ |
| |
| ASMMACRO(mtc0_tlbw_hazard, |
| _ssnop; _ssnop; _ssnop; _ssnop |
| ) |
| ASMMACRO(tlbw_use_hazard, |
| _ssnop; _ssnop; _ssnop; _ssnop |
| ) |
| ASMMACRO(tlb_probe_hazard, |
| _ssnop; _ssnop; _ssnop; _ssnop |
| ) |
| ASMMACRO(irq_enable_hazard, |
| ) |
| ASMMACRO(irq_disable_hazard, |
| ) |
| ASMMACRO(back_to_back_c0_hazard, |
| ) |
| #define instruction_hazard() do { } while (0) |
| |
| #elif defined(CONFIG_CPU_SB1) |
| |
| /* |
| * Mostly like R4000 for historic reasons |
| */ |
| ASMMACRO(mtc0_tlbw_hazard, |
| ) |
| ASMMACRO(tlbw_use_hazard, |
| ) |
| ASMMACRO(tlb_probe_hazard, |
| ) |
| ASMMACRO(irq_enable_hazard, |
| ) |
| ASMMACRO(irq_disable_hazard, |
| _ssnop; _ssnop; _ssnop |
| ) |
| ASMMACRO(back_to_back_c0_hazard, |
| ) |
| #define instruction_hazard() do { } while (0) |
| |
| #else |
| |
| /* |
| * Finally the catchall case for all other processors including R4000, R4400, |
| * R4600, R4700, R5000, RM7000, NEC VR41xx etc. |
| * |
| * The taken branch will result in a two cycle penalty for the two killed |
| * instructions on R4000 / R4400. Other processors only have a single cycle |
| * hazard so this is nice trick to have an optimal code for a range of |
| * processors. |
| */ |
| ASMMACRO(mtc0_tlbw_hazard, |
| nop; nop |
| ) |
| ASMMACRO(tlbw_use_hazard, |
| nop; nop; nop |
| ) |
| ASMMACRO(tlb_probe_hazard, |
| nop; nop; nop |
| ) |
| ASMMACRO(irq_enable_hazard, |
| ) |
| ASMMACRO(irq_disable_hazard, |
| nop; nop; nop |
| ) |
| ASMMACRO(back_to_back_c0_hazard, |
| _ssnop; _ssnop; _ssnop; |
| ) |
| #define instruction_hazard() do { } while (0) |
| |
| #endif |
| |
| |
| /* FPU hazards */ |
| |
| #if defined(CONFIG_CPU_SB1) |
| ASMMACRO(enable_fpu_hazard, |
| .set push; |
| .set mips64; |
| .set noreorder; |
| _ssnop; |
| bnezl $0,.+4; |
| _ssnop; |
| .set pop |
| ) |
| ASMMACRO(disable_fpu_hazard, |
| ) |
| |
| #elif defined(CONFIG_CPU_MIPSR2) |
| ASMMACRO(enable_fpu_hazard, |
| _ehb |
| ) |
| ASMMACRO(disable_fpu_hazard, |
| _ehb |
| ) |
| #else |
| ASMMACRO(enable_fpu_hazard, |
| nop; nop; nop; nop |
| ) |
| ASMMACRO(disable_fpu_hazard, |
| _ehb |
| ) |
| #endif |
| |
| #endif /* _ASM_HAZARDS_H */ |