ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code
Fix sparse warnings in mach-omap2/irq.c. Fix by defining
intc_bank_write_reg() and intc_bank_read_reg(), and convert INTC module
register access to use them rather than __raw_{read,write}l.
Also clear up some checkpatch warnings involving includes from asm/
rather than linux/.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index a5c748a..c39e26d 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -13,17 +13,23 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#define INTC_REVISION 0x0000
-#define INTC_SYSCONFIG 0x0010
-#define INTC_SYSSTATUS 0x0014
-#define INTC_CONTROL 0x0048
-#define INTC_MIR_CLEAR0 0x0088
-#define INTC_MIR_SET0 0x008c
+
+/* selected INTC register offsets */
+
+#define INTC_REVISION 0x0000
+#define INTC_SYSCONFIG 0x0010
+#define INTC_SYSSTATUS 0x0014
+#define INTC_CONTROL 0x0048
+#define INTC_MIR_CLEAR0 0x0088
+#define INTC_MIR_SET0 0x008c
+#define INTC_PENDING_IRQ0 0x0098
+
+/* Number of IRQ state bits in each MIR register */
+#define IRQ_BITS_PER_REG 32
/*
* OMAP2 has a number of different interrupt controllers, each interrupt
@@ -42,36 +48,40 @@
},
};
+/* INTC bank register get/set */
+
+static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
+{
+ __raw_writel(val, bank->base_reg + reg);
+}
+
+static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg)
+{
+ return __raw_readl(bank->base_reg + reg);
+}
+
/* XXX: FIQ and additional INTC support (only MPU at the moment) */
static void omap_ack_irq(unsigned int irq)
{
- __raw_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL);
+ intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL);
}
static void omap_mask_irq(unsigned int irq)
{
- int offset = (irq >> 5) << 5;
+ int offset = irq & (~(IRQ_BITS_PER_REG - 1));
- if (irq >= 64) {
- irq %= 64;
- } else if (irq >= 32) {
- irq %= 32;
- }
+ irq &= (IRQ_BITS_PER_REG - 1);
- __raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset);
+ intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_SET0 + offset);
}
static void omap_unmask_irq(unsigned int irq)
{
- int offset = (irq >> 5) << 5;
+ int offset = irq & (~(IRQ_BITS_PER_REG - 1));
- if (irq >= 64) {
- irq %= 64;
- } else if (irq >= 32) {
- irq %= 32;
- }
+ irq &= (IRQ_BITS_PER_REG - 1);
- __raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset);
+ intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_CLEAR0 + offset);
}
static void omap_mask_ack_irq(unsigned int irq)
@@ -91,20 +101,20 @@
{
unsigned long tmp;
- tmp = __raw_readl(bank->base_reg + INTC_REVISION) & 0xff;
+ tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff;
printk(KERN_INFO "IRQ: Found an INTC at 0x%p "
"(revision %ld.%ld) with %d interrupts\n",
bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
- tmp = __raw_readl(bank->base_reg + INTC_SYSCONFIG);
+ tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG);
tmp |= 1 << 1; /* soft reset */
- __raw_writel(tmp, bank->base_reg + INTC_SYSCONFIG);
+ intc_bank_write_reg(tmp, bank, INTC_SYSCONFIG);
- while (!(__raw_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1))
+ while (!(intc_bank_read_reg(bank, INTC_SYSSTATUS) & 0x1))
/* Wait for reset to complete */;
/* Enable autoidle */
- __raw_writel(1 << 0, bank->base_reg + INTC_SYSCONFIG);
+ intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
}
void __init omap_init_irq(void)
@@ -117,7 +127,8 @@
struct omap_irq_bank *bank = irq_banks + i;
if (cpu_is_omap24xx())
- bank->base_reg = IO_ADDRESS(OMAP24XX_IC_BASE);
+ bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE);
+
omap_irq_bank_init_one(bank);
nr_irqs += bank->nr_irqs;