arch/sh/Kconfig - kernel/msm-4.19 - Gitiles

 config SUPERH
 	def_bool y
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select HAVE_PATA_PLATFORM
 	select CLKDEV_LOOKUP
 	select HAVE_IDE if HAS_IOPORT_MAP
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
 	select ARCH_DISCARD_MEMBLOCK
 	select HAVE_OPROFILE
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
 	select HAVE_PERF_EVENTS
 	select HAVE_DEBUG_BUGVERBOSE
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select PERF_USE_VMALLOC
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
 	select HAVE_KERNEL_XZ
 	select HAVE_KERNEL_LZO
 	select HAVE_UID16
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select MAY_HAVE_SPARSE_IRQ
 	select IRQ_FORCED_THREADING
 	select RTC_LIB
 	select GENERIC_ATOMIC64
 	select GENERIC_IRQ_SHOW
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER
 	select MODULES_USE_ELF_RELA
 	select OLD_SIGSUSPEND
 	select OLD_SIGACTION
 	select HAVE_ARCH_AUDITSYSCALL
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
 	  gaming console.  The SuperH port has a home page at
 	  <http://www.linux-sh.org/>.

 config SUPERH32
 	def_bool ARCH = "sh"
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_IOREMAP_PROT if MMU && !X2TLB
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_ARCH_KGDB
 	select HAVE_HW_BREAKPOINT
 	select HAVE_MIXED_BREAKPOINTS_REGS
 	select PERF_EVENTS
 	select ARCH_HIBERNATION_POSSIBLE if MMU
 	select SPARSE_IRQ
 	select HAVE_CC_STACKPROTECTOR

 config SUPERH64
 	def_bool ARCH = "sh64"
 	select HAVE_EXIT_THREAD
 	select KALLSYMS

 config ARCH_DEFCONFIG
 	string
 	default "arch/sh/configs/shx3_defconfig" if SUPERH32
 	default "arch/sh/configs/cayman_defconfig" if SUPERH64

 config RWSEM_GENERIC_SPINLOCK
 	def_bool y

 config RWSEM_XCHGADD_ALGORITHM
 	bool

 config GENERIC_BUG
 	def_bool y
 	depends on BUG && SUPERH32

 config GENERIC_CSUM
 	def_bool y
 	depends on SUPERH64

 config GENERIC_HWEIGHT
 	def_bool y

 config GENERIC_CALIBRATE_DELAY
 	bool

 config GENERIC_LOCKBREAK
 	def_bool y
 	depends on SMP && PREEMPT

 config ARCH_SUSPEND_POSSIBLE
 	def_bool n

 config ARCH_HIBERNATION_POSSIBLE
 	def_bool n

 config SYS_SUPPORTS_APM_EMULATION
 	bool
 	select ARCH_SUSPEND_POSSIBLE

 config SYS_SUPPORTS_HUGETLBFS
 	bool

 config SYS_SUPPORTS_SMP
 	bool

 config SYS_SUPPORTS_NUMA
 	bool

 config SYS_SUPPORTS_PCI
 	bool

 config STACKTRACE_SUPPORT
 	def_bool y

 config LOCKDEP_SUPPORT
 	def_bool y

 config ARCH_HAS_ILOG2_U32
 	def_bool n

 config ARCH_HAS_ILOG2_U64
 	def_bool n

 config NO_IOPORT_MAP
 	def_bool !PCI
 	depends on !SH_CAYMAN && !SH_SH4202_MICRODEV && !SH_SHMIN && \
 		   !SH_HP6XX && !SH_SOLUTION_ENGINE

 config IO_TRAPPED
 	bool

 config SWAP_IO_SPACE
 	bool

 config DMA_COHERENT
 	bool

 config DMA_NONCOHERENT
 	def_bool !DMA_COHERENT

 config NEED_DMA_MAP_STATE
 	def_bool DMA_NONCOHERENT

 config NEED_SG_DMA_LENGTH
 	def_bool y

 config PGTABLE_LEVELS
 	default 3 if X2TLB
 	default 2

 source "init/Kconfig"

 source "kernel/Kconfig.freezer"

 menu "System type"

 #
 # Processor families
 #
 config CPU_SH2
 	bool
 	select SH_INTC

 config CPU_SH2A
 	bool
 	select CPU_SH2
 	select UNCACHED_MAPPING

 config CPU_SH3
 	bool
 	select CPU_HAS_INTEVT
 	select CPU_HAS_SR_RB
 	select SH_INTC
 	select SYS_SUPPORTS_SH_TMU

 config CPU_SH4
 	bool
 	select CPU_HAS_INTEVT
 	select CPU_HAS_SR_RB
 	select CPU_HAS_FPU if !CPU_SH4AL_DSP
 	select SH_INTC
 	select SYS_SUPPORTS_SH_TMU
 	select SYS_SUPPORTS_HUGETLBFS if MMU

 config CPU_SH4A
 	bool
 	select CPU_SH4

 config CPU_SH4AL_DSP
 	bool
 	select CPU_SH4A
 	select CPU_HAS_DSP

 config CPU_SH5
 	bool
 	select CPU_HAS_FPU
 	select SYS_SUPPORTS_SH_TMU
 	select SYS_SUPPORTS_HUGETLBFS if MMU

 config CPU_SHX2
 	bool

 config CPU_SHX3
 	bool
 	select DMA_COHERENT
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_NUMA

 config ARCH_SHMOBILE
 	bool
 	select ARCH_SUSPEND_POSSIBLE
 	select PM

 config CPU_HAS_PMU
        depends on CPU_SH4 || CPU_SH4A
        default y
        bool

 if SUPERH32

 choice
 	prompt "Processor sub-type selection"

 #
 # Processor subtypes
 #

 # SH-2 Processor Support

 config CPU_SUBTYPE_SH7619
 	bool "Support SH7619 processor"
 	select CPU_SH2
 	select SYS_SUPPORTS_SH_CMT

 # SH-2A Processor Support

 config CPU_SUBTYPE_SH7201
 	bool "Support SH7201 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
 	select SYS_SUPPORTS_SH_MTU2

 config CPU_SUBTYPE_SH7203
 	bool "Support SH7203 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
 	select SYS_SUPPORTS_SH_CMT
 	select SYS_SUPPORTS_SH_MTU2
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL

 config CPU_SUBTYPE_SH7206
 	bool "Support SH7206 processor"
 	select CPU_SH2A
 	select SYS_SUPPORTS_SH_CMT
 	select SYS_SUPPORTS_SH_MTU2

 config CPU_SUBTYPE_SH7263
 	bool "Support SH7263 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
 	select SYS_SUPPORTS_SH_CMT
 	select SYS_SUPPORTS_SH_MTU2

 config CPU_SUBTYPE_SH7264
 	bool "Support SH7264 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
 	select SYS_SUPPORTS_SH_CMT
 	select SYS_SUPPORTS_SH_MTU2
 	select PINCTRL

 config CPU_SUBTYPE_SH7269
 	bool "Support SH7269 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
 	select SYS_SUPPORTS_SH_CMT
 	select SYS_SUPPORTS_SH_MTU2
 	select PINCTRL

 config CPU_SUBTYPE_MXG
 	bool "Support MX-G processor"
 	select CPU_SH2A
 	select SYS_SUPPORTS_SH_MTU2
 	help
 	  Select MX-G if running on an R8A03022BG part.

 # SH-3 Processor Support

 config CPU_SUBTYPE_SH7705
 	bool "Support SH7705 processor"
 	select CPU_SH3

 config CPU_SUBTYPE_SH7706
 	bool "Support SH7706 processor"
 	select CPU_SH3
 	help
 	  Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU.

 config CPU_SUBTYPE_SH7707
 	bool "Support SH7707 processor"
 	select CPU_SH3
 	help
 	  Select SH7707 if you have a  60 Mhz SH-3 HD6417707 CPU.

 config CPU_SUBTYPE_SH7708
 	bool "Support SH7708 processor"
 	select CPU_SH3
 	help
 	  Select SH7708 if you have a  60 Mhz SH-3 HD6417708S or
 	  if you have a 100 Mhz SH-3 HD6417708R CPU.

 config CPU_SUBTYPE_SH7709
 	bool "Support SH7709 processor"
 	select CPU_SH3
 	help
 	  Select SH7709 if you have a  80 Mhz SH-3 HD6417709 CPU.

 config CPU_SUBTYPE_SH7710
 	bool "Support SH7710 processor"
 	select CPU_SH3
 	select CPU_HAS_DSP
 	help
 	  Select SH7710 if you have a SH3-DSP SH7710 CPU.

 config CPU_SUBTYPE_SH7712
 	bool "Support SH7712 processor"
 	select CPU_SH3
 	select CPU_HAS_DSP
 	help
 	  Select SH7712 if you have a SH3-DSP SH7712 CPU.

 config CPU_SUBTYPE_SH7720
 	bool "Support SH7720 processor"
 	select CPU_SH3
 	select CPU_HAS_DSP
 	select SYS_SUPPORTS_SH_CMT
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select USB_OHCI_SH if USB_OHCI_HCD
 	select PINCTRL
 	help
 	  Select SH7720 if you have a SH3-DSP SH7720 CPU.

 config CPU_SUBTYPE_SH7721
 	bool "Support SH7721 processor"
 	select CPU_SH3
 	select CPU_HAS_DSP
 	select SYS_SUPPORTS_SH_CMT
 	select USB_OHCI_SH if USB_OHCI_HCD
 	help
 	  Select SH7721 if you have a SH3-DSP SH7721 CPU.

 # SH-4 Processor Support

 config CPU_SUBTYPE_SH7750
 	bool "Support SH7750 processor"
 	select CPU_SH4
 	help
 	  Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.

 config CPU_SUBTYPE_SH7091
 	bool "Support SH7091 processor"
 	select CPU_SH4
 	help
 	  Select SH7091 if you have an SH-4 based Sega device (such as
 	  the Dreamcast, Naomi, and Naomi 2).

 config CPU_SUBTYPE_SH7750R
 	bool "Support SH7750R processor"
 	select CPU_SH4

 config CPU_SUBTYPE_SH7750S
 	bool "Support SH7750S processor"
 	select CPU_SH4

 config CPU_SUBTYPE_SH7751
 	bool "Support SH7751 processor"
 	select CPU_SH4
 	help
 	  Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU,
 	  or if you have a HD6417751R CPU.

 config CPU_SUBTYPE_SH7751R
 	bool "Support SH7751R processor"
 	select CPU_SH4

 config CPU_SUBTYPE_SH7760
 	bool "Support SH7760 processor"
 	select CPU_SH4

 config CPU_SUBTYPE_SH4_202
 	bool "Support SH4-202 processor"
 	select CPU_SH4

 # SH-4A Processor Support

 config CPU_SUBTYPE_SH7723
 	bool "Support SH7723 processor"
 	select CPU_SH4A
 	select CPU_SHX2
 	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_SH_CMT
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL
 	help
 	  Select SH7723 if you have an SH-MobileR2 CPU.

 config CPU_SUBTYPE_SH7724
 	bool "Support SH7724 processor"
 	select CPU_SH4A
 	select CPU_SHX2
 	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_SH_CMT
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL
 	help
 	  Select SH7724 if you have an SH-MobileR2R CPU.

 config CPU_SUBTYPE_SH7734
 	bool "Support SH7734 processor"
 	select CPU_SH4A
 	select CPU_SHX2
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL
 	help
 	  Select SH7734 if you have a SH4A SH7734 CPU.

 config CPU_SUBTYPE_SH7757
 	bool "Support SH7757 processor"
 	select CPU_SH4A
 	select CPU_SHX2
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL
 	help
 	  Select SH7757 if you have a SH4A SH7757 CPU.

 config CPU_SUBTYPE_SH7763
 	bool "Support SH7763 processor"
 	select CPU_SH4A
 	select USB_OHCI_SH if USB_OHCI_HCD
 	help
 	  Select SH7763 if you have a SH4A SH7763(R5S77631) CPU.

 config CPU_SUBTYPE_SH7770
 	bool "Support SH7770 processor"
 	select CPU_SH4A

 config CPU_SUBTYPE_SH7780
 	bool "Support SH7780 processor"
 	select CPU_SH4A

 config CPU_SUBTYPE_SH7785
 	bool "Support SH7785 processor"
 	select CPU_SH4A
 	select CPU_SHX2
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL

 config CPU_SUBTYPE_SH7786
 	bool "Support SH7786 processor"
 	select CPU_SH4A
 	select CPU_SHX3
 	select CPU_HAS_PTEAEX
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select USB_OHCI_SH if USB_OHCI_HCD
 	select USB_EHCI_SH if USB_EHCI_HCD
 	select PINCTRL

 config CPU_SUBTYPE_SHX3
 	bool "Support SH-X3 processor"
 	select CPU_SH4A
 	select CPU_SHX3
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 	select ARCH_REQUIRE_GPIOLIB
 	select PINCTRL

 # SH4AL-DSP Processor Support

 config CPU_SUBTYPE_SH7343
 	bool "Support SH7343 processor"
 	select CPU_SH4AL_DSP
 	select ARCH_SHMOBILE
 	select SYS_SUPPORTS_SH_CMT

 config CPU_SUBTYPE_SH7722
 	bool "Support SH7722 processor"
 	select CPU_SH4AL_DSP
 	select CPU_SHX2
 	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_SH_CMT
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL

 config CPU_SUBTYPE_SH7366
 	bool "Support SH7366 processor"
 	select CPU_SH4AL_DSP
 	select CPU_SHX2
 	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_SH_CMT

 endchoice

 endif

 if SUPERH64

 choice
 	prompt "Processor sub-type selection"

 # SH-5 Processor Support

 config CPU_SUBTYPE_SH5_101
 	bool "Support SH5-101 processor"
 	select CPU_SH5

 config CPU_SUBTYPE_SH5_103
 	bool "Support SH5-103 processor"
 	select CPU_SH5

 endchoice

 endif

 source "arch/sh/mm/Kconfig"

 source "arch/sh/Kconfig.cpu"

 source "arch/sh/boards/Kconfig"

 menu "Timer and clock configuration"

 config SH_PCLK_FREQ
 	int "Peripheral clock frequency (in Hz)"
 	depends on SH_CLK_CPG_LEGACY
 	default "31250000" if CPU_SUBTYPE_SH7619
 	default "33333333" if CPU_SUBTYPE_SH7770 || \
 			      CPU_SUBTYPE_SH7760 || \
 			      CPU_SUBTYPE_SH7705 || \
 			      CPU_SUBTYPE_SH7203 || \
 			      CPU_SUBTYPE_SH7206 || \
 			      CPU_SUBTYPE_SH7263 || \
 			      CPU_SUBTYPE_MXG
 	default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
 	default "66000000" if CPU_SUBTYPE_SH4_202
 	default "50000000"
 	help
 	  This option is used to specify the peripheral clock frequency.
 	  This is necessary for determining the reference clock value on
 	  platforms lacking an RTC.

 config SH_CLK_CPG
 	def_bool y

 config SH_CLK_CPG_LEGACY
 	depends on SH_CLK_CPG
 	def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \
 		      !CPU_SHX3 && !CPU_SUBTYPE_SH7757 && \
 		      !CPU_SUBTYPE_SH7734 && !CPU_SUBTYPE_SH7264 && \
 		      !CPU_SUBTYPE_SH7269

 endmenu

 menu "CPU Frequency scaling"
 source "drivers/cpufreq/Kconfig"
 endmenu

 source "arch/sh/drivers/Kconfig"

 endmenu

 menu "Kernel features"

 source kernel/Kconfig.hz

 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
 	depends on SUPERH32 && MMU
 	select KEXEC_CORE
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
 	  but it is independent of the system firmware.  And like a reboot
 	  you can start any kernel with it, not just Linux.

 	  The name comes from the similarity to the exec system call.

 	  It is an ongoing process to be certain the hardware in a machine
 	  is properly shutdown, so do not be surprised if this code does not
 	  initially work for you.  As of this writing the exact hardware
 	  interface is strongly in flux, so no good recommendation can be
 	  made.

 config CRASH_DUMP
 	bool "kernel crash dumps (EXPERIMENTAL)"
 	depends on SUPERH32 && BROKEN_ON_SMP
 	help
 	  Generate crash dump after being started by kexec.
 	  This should be normally only set in special crash dump kernels
 	  which are loaded in the main kernel with kexec-tools into
 	  a specially reserved region and then later executed after
 	  a crash by kdump/kexec. The crash dump kernel must be compiled
 	  to a memory address not used by the main kernel using
 	  PHYSICAL_START.

 	  For more details see Documentation/kdump/kdump.txt

 config KEXEC_JUMP
 	bool "kexec jump (EXPERIMENTAL)"
 	depends on SUPERH32 && KEXEC && HIBERNATION
 	help
 	  Jump between original kernel and kexeced kernel and invoke
 	  code via KEXEC

 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
 	default MEMORY_START
 	---help---
 	  This gives the physical address where the kernel is loaded
 	  and is ordinarily the same as MEMORY_START.

 	  Different values are primarily used in the case of kexec on panic
 	  where the fail safe kernel needs to run at a different address
 	  than the panic-ed kernel.

 config SECCOMP
 	bool "Enable seccomp to safely compute untrusted bytecode"
 	depends on PROC_FS
 	help
 	  This kernel feature is useful for number crunching applications
 	  that may need to compute untrusted bytecode during their
 	  execution. By using pipes or other transports made available to
 	  the process as file descriptors supporting the read/write
 	  syscalls, it's possible to isolate those applications in
 	  their own address space using seccomp. Once seccomp is
 	  enabled via prctl, it cannot be disabled and the task is only
 	  allowed to execute a few safe syscalls defined by each seccomp
 	  mode.

 	  If unsure, say N.

 config SMP
 	bool "Symmetric multi-processing support"
 	depends on SYS_SUPPORTS_SMP
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
 	  than one CPU, say Y.

 	  If you say N here, the kernel will run on uni- and multiprocessor
 	  machines, but will use only one CPU of a multiprocessor machine. If
 	  you say Y here, the kernel will run on many, but not all,
 	  uniprocessor machines. On a uniprocessor machine, the kernel
 	  will run faster if you say N here.

 	  People using multiprocessor machines who say Y here should also say
 	  Y to "Enhanced Real Time Clock Support", below.

 	  See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
 	  available at <http://www.tldp.org/docs.html#howto>.

 	  If you don't know what to do here, say N.

 config NR_CPUS
 	int "Maximum number of CPUs (2-32)"
 	range 2 32
 	depends on SMP
 	default "4" if CPU_SUBTYPE_SHX3
 	default "2"
 	help
 	  This allows you to specify the maximum number of CPUs which this
 	  kernel will support.  The maximum supported value is 32 and the
 	  minimum value which makes sense is 2.

 	  This is purely to save memory - each supported CPU adds
 	  approximately eight kilobytes to the kernel image.

 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
 	depends on SMP
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.

 source "kernel/Kconfig.preempt"

 config GUSA
 	def_bool y
 	depends on !SMP && SUPERH32
 	help
 	  This enables support for gUSA (general UserSpace Atomicity).
 	  This is the default implementation for both UP and non-ll/sc
 	  CPUs, and is used by the libc, amongst others.

 	  For additional information, design information can be found
 	  in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.

 	  This should only be disabled for special cases where alternate
 	  atomicity implementations exist.

 config GUSA_RB
 	bool "Implement atomic operations by roll-back (gRB) (EXPERIMENTAL)"
 	depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A)
 	help
 	  Enabling this option will allow the kernel to implement some
 	  atomic operations using a software implementation of load-locked/
 	  store-conditional (LLSC). On machines which do not have hardware
 	  LLSC, this should be more efficient than the other alternative of
 	  disabling interrupts around the atomic sequence.

 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
 	depends on PERF_EVENTS && CPU_HAS_PMU
 	default y
 	help
 	  Enable hardware performance counter support for perf events. If
 	  disabled, perf events will use software events only.

 source "drivers/sh/Kconfig"

 endmenu

 menu "Boot options"

 config ZERO_PAGE_OFFSET
 	hex
 	default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \
 				SH_7751_SOLUTION_ENGINE
 	default "0x00004000" if PAGE_SIZE_16KB || SH_SH03
 	default "0x00002000" if PAGE_SIZE_8KB
 	default "0x00001000"
 	help
 	  This sets the default offset of zero page.

 config BOOT_LINK_OFFSET
 	hex
 	default "0x00210000" if SH_SHMIN
 	default "0x00400000" if SH_CAYMAN
 	default "0x00810000" if SH_7780_SOLUTION_ENGINE
 	default "0x009e0000" if SH_TITAN
 	default "0x01800000" if SH_SDK7780
 	default "0x02000000" if SH_EDOSK7760
 	default "0x00800000"
 	help
 	  This option allows you to set the link address offset of the zImage.
 	  This can be useful if you are on a board which has a small amount of
 	  memory.

 config ENTRY_OFFSET
 	hex
 	default "0x00001000" if PAGE_SIZE_4KB
 	default "0x00002000" if PAGE_SIZE_8KB
 	default "0x00004000" if PAGE_SIZE_16KB
 	default "0x00010000" if PAGE_SIZE_64KB
 	default "0x00000000"

 config ROMIMAGE_MMCIF
 	bool "Include MMCIF loader in romImage (EXPERIMENTAL)"
 	depends on CPU_SUBTYPE_SH7724
 	help
 	  Say Y here to include experimental MMCIF loading code in
 	  romImage. With this enabled it is possible to write the romImage
 	  kernel image to an MMC card and boot the kernel straight from
 	  the reset vector. At reset the processor Mask ROM will load the
 	  first part of the romImage which in turn loads the rest the kernel
 	  image to RAM using the MMCIF hardware block.

 choice
 	prompt "Kernel command line"
 	optional
 	default CMDLINE_OVERWRITE
 	help
 	  Setting this option allows the kernel command line arguments
 	  to be set.

 config CMDLINE_OVERWRITE
 	bool "Overwrite bootloader kernel arguments"
 	help
 	  Given string will overwrite any arguments passed in by
 	  a bootloader.

 config CMDLINE_EXTEND
 	bool "Extend bootloader kernel arguments"
 	help
 	  Given string will be concatenated with arguments passed in
 	  by a bootloader.

 endchoice

 config CMDLINE
 	string "Kernel command line arguments string"
 	depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND
 	default "console=ttySC1,115200"

 endmenu

 menu "Bus options"

 config SUPERHYWAY
 	tristate "SuperHyway Bus support"
 	depends on CPU_SUBTYPE_SH4_202

 config MAPLE
 	bool "Maple Bus support"
 	depends on SH_DREAMCAST
 	help
 	 The Maple Bus is SEGA's serial communication bus for peripherals
 	 on the Dreamcast. Without this bus support you won't be able to
 	 get your Dreamcast keyboard etc to work, so most users
 	 probably want to say 'Y' here, unless you are only using the
 	 Dreamcast with a serial line terminal or a remote network
 	 connection.

 config PCI
 	bool "PCI support"
 	depends on SYS_SUPPORTS_PCI
 	select PCI_DOMAINS
 	select GENERIC_PCI_IOMAP
 	select NO_GENERIC_PCI_IOPORT_MAP
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
 	  your box. If you have PCI, say Y, otherwise N.

 config PCI_DOMAINS
 	bool

 source "drivers/pci/Kconfig"

 source "drivers/pcmcia/Kconfig"

 endmenu

 menu "Executable file formats"

 source "fs/Kconfig.binfmt"

 endmenu

 menu "Power management options (EXPERIMENTAL)"

 source "kernel/power/Kconfig"

 source "drivers/cpuidle/Kconfig"

 endmenu

 source "net/Kconfig"

 source "drivers/Kconfig"

 source "fs/Kconfig"

 source "arch/sh/Kconfig.debug"

 source "security/Kconfig"

 source "crypto/Kconfig"

 source "lib/Kconfig"
	config SUPERH
	def_bool y
	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
	select ARCH_MIGHT_HAVE_PC_PARPORT
	select HAVE_PATA_PLATFORM
	select CLKDEV_LOOKUP
	select HAVE_IDE if HAS_IOPORT_MAP
	select HAVE_MEMBLOCK
	select HAVE_MEMBLOCK_NODE_MAP
	select ARCH_DISCARD_MEMBLOCK
	select HAVE_OPROFILE
	select HAVE_GENERIC_DMA_COHERENT
	select HAVE_ARCH_TRACEHOOK
	select HAVE_DMA_API_DEBUG
	select HAVE_PERF_EVENTS
	select HAVE_DEBUG_BUGVERBOSE
	select ARCH_HAVE_CUSTOM_GPIO_H
	select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB \|\| CPU_SH4A)
	select ARCH_HAS_GCOV_PROFILE_ALL
	select PERF_USE_VMALLOC
	select HAVE_DEBUG_KMEMLEAK
	select HAVE_KERNEL_GZIP
	select HAVE_KERNEL_BZIP2
	select HAVE_KERNEL_LZMA
	select HAVE_KERNEL_XZ
	select HAVE_KERNEL_LZO
	select HAVE_UID16
	select ARCH_WANT_IPC_PARSE_VERSION
	select HAVE_SYSCALL_TRACEPOINTS
	select HAVE_REGS_AND_STACK_ACCESS_API
	select MAY_HAVE_SPARSE_IRQ
	select IRQ_FORCED_THREADING
	select RTC_LIB
	select GENERIC_ATOMIC64
	select GENERIC_IRQ_SHOW
	select GENERIC_SMP_IDLE_THREAD
	select GENERIC_IDLE_POLL_SETUP
	select GENERIC_CLOCKEVENTS
	select GENERIC_CMOS_UPDATE if SH_SH03 \|\| SH_DREAMCAST
	select GENERIC_STRNCPY_FROM_USER
	select GENERIC_STRNLEN_USER
	select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER
	select MODULES_USE_ELF_RELA
	select OLD_SIGSUSPEND
	select OLD_SIGACTION
	select HAVE_ARCH_AUDITSYSCALL
	help
	The SuperH is a RISC processor targeted for use in embedded systems
	and consumer electronics; it was also used in the Sega Dreamcast
	gaming console. The SuperH port has a home page at
	<http://www.linux-sh.org/>.

	config SUPERH32
	def_bool ARCH = "sh"
	select HAVE_KPROBES
	select HAVE_KRETPROBES
	select HAVE_IOREMAP_PROT if MMU && !X2TLB
	select HAVE_FUNCTION_TRACER
	select HAVE_FTRACE_MCOUNT_RECORD
	select HAVE_DYNAMIC_FTRACE
	select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
	select ARCH_WANT_IPC_PARSE_VERSION
	select HAVE_FUNCTION_GRAPH_TRACER
	select HAVE_ARCH_KGDB
	select HAVE_HW_BREAKPOINT
	select HAVE_MIXED_BREAKPOINTS_REGS
	select PERF_EVENTS
	select ARCH_HIBERNATION_POSSIBLE if MMU
	select SPARSE_IRQ
	select HAVE_CC_STACKPROTECTOR

	config SUPERH64
	def_bool ARCH = "sh64"
	select HAVE_EXIT_THREAD
	select KALLSYMS

	config ARCH_DEFCONFIG
	string
	default "arch/sh/configs/shx3_defconfig" if SUPERH32
	default "arch/sh/configs/cayman_defconfig" if SUPERH64

	config RWSEM_GENERIC_SPINLOCK
	def_bool y

	config RWSEM_XCHGADD_ALGORITHM
	bool

	config GENERIC_BUG
	def_bool y
	depends on BUG && SUPERH32

	config GENERIC_CSUM
	def_bool y
	depends on SUPERH64

	config GENERIC_HWEIGHT
	def_bool y

	config GENERIC_CALIBRATE_DELAY
	bool

	config GENERIC_LOCKBREAK
	def_bool y
	depends on SMP && PREEMPT

	config ARCH_SUSPEND_POSSIBLE
	def_bool n

	config ARCH_HIBERNATION_POSSIBLE
	def_bool n

	config SYS_SUPPORTS_APM_EMULATION
	bool
	select ARCH_SUSPEND_POSSIBLE

	config SYS_SUPPORTS_HUGETLBFS
	bool

	config SYS_SUPPORTS_SMP
	bool

	config SYS_SUPPORTS_NUMA
	bool

	config SYS_SUPPORTS_PCI
	bool

	config STACKTRACE_SUPPORT
	def_bool y

	config LOCKDEP_SUPPORT
	def_bool y

	config ARCH_HAS_ILOG2_U32
	def_bool n

	config ARCH_HAS_ILOG2_U64
	def_bool n

	config NO_IOPORT_MAP
	def_bool !PCI
	depends on !SH_CAYMAN && !SH_SH4202_MICRODEV && !SH_SHMIN && \
	!SH_HP6XX && !SH_SOLUTION_ENGINE

	config IO_TRAPPED
	bool

	config SWAP_IO_SPACE
	bool

	config DMA_COHERENT
	bool

	config DMA_NONCOHERENT
	def_bool !DMA_COHERENT

	config NEED_DMA_MAP_STATE
	def_bool DMA_NONCOHERENT

	config NEED_SG_DMA_LENGTH
	def_bool y

	config PGTABLE_LEVELS
	default 3 if X2TLB
	default 2

	source "init/Kconfig"

	source "kernel/Kconfig.freezer"

	menu "System type"

	#
	# Processor families
	#
	config CPU_SH2
	bool
	select SH_INTC

	config CPU_SH2A
	bool
	select CPU_SH2
	select UNCACHED_MAPPING

	config CPU_SH3
	bool
	select CPU_HAS_INTEVT
	select CPU_HAS_SR_RB
	select SH_INTC
	select SYS_SUPPORTS_SH_TMU

	config CPU_SH4
	bool
	select CPU_HAS_INTEVT
	select CPU_HAS_SR_RB
	select CPU_HAS_FPU if !CPU_SH4AL_DSP
	select SH_INTC
	select SYS_SUPPORTS_SH_TMU
	select SYS_SUPPORTS_HUGETLBFS if MMU

	config CPU_SH4A
	bool
	select CPU_SH4

	config CPU_SH4AL_DSP
	bool
	select CPU_SH4A
	select CPU_HAS_DSP

	config CPU_SH5
	bool
	select CPU_HAS_FPU
	select SYS_SUPPORTS_SH_TMU
	select SYS_SUPPORTS_HUGETLBFS if MMU

	config CPU_SHX2
	bool

	config CPU_SHX3
	bool
	select DMA_COHERENT
	select SYS_SUPPORTS_SMP
	select SYS_SUPPORTS_NUMA

	config ARCH_SHMOBILE
	bool
	select ARCH_SUSPEND_POSSIBLE
	select PM

	config CPU_HAS_PMU
	depends on CPU_SH4 \|\| CPU_SH4A
	default y
	bool

	if SUPERH32

	choice
	prompt "Processor sub-type selection"

	#
	# Processor subtypes
	#

	# SH-2 Processor Support

	config CPU_SUBTYPE_SH7619
	bool "Support SH7619 processor"
	select CPU_SH2
	select SYS_SUPPORTS_SH_CMT

	# SH-2A Processor Support

	config CPU_SUBTYPE_SH7201
	bool "Support SH7201 processor"
	select CPU_SH2A
	select CPU_HAS_FPU
	select SYS_SUPPORTS_SH_MTU2

	config CPU_SUBTYPE_SH7203
	bool "Support SH7203 processor"
	select CPU_SH2A
	select CPU_HAS_FPU
	select SYS_SUPPORTS_SH_CMT
	select SYS_SUPPORTS_SH_MTU2
	select ARCH_WANT_OPTIONAL_GPIOLIB
	select PINCTRL

	config CPU_SUBTYPE_SH7206
	bool "Support SH7206 processor"
	select CPU_SH2A
	select SYS_SUPPORTS_SH_CMT
	select SYS_SUPPORTS_SH_MTU2

	config CPU_SUBTYPE_SH7263
	bool "Support SH7263 processor"
	select CPU_SH2A
	select CPU_HAS_FPU
	select SYS_SUPPORTS_SH_CMT
	select SYS_SUPPORTS_SH_MTU2

	config CPU_SUBTYPE_SH7264
	bool "Support SH7264 processor"
	select CPU_SH2A
	select CPU_HAS_FPU
	select SYS_SUPPORTS_SH_CMT
	select SYS_SUPPORTS_SH_MTU2
	select PINCTRL

	config CPU_SUBTYPE_SH7269
	bool "Support SH7269 processor"
	select CPU_SH2A
	select CPU_HAS_FPU
	select SYS_SUPPORTS_SH_CMT
	select SYS_SUPPORTS_SH_MTU2
	select PINCTRL

	config CPU_SUBTYPE_MXG
	bool "Support MX-G processor"
	select CPU_SH2A
	select SYS_SUPPORTS_SH_MTU2
	help
	Select MX-G if running on an R8A03022BG part.

	# SH-3 Processor Support

	config CPU_SUBTYPE_SH7705
	bool "Support SH7705 processor"
	select CPU_SH3

	config CPU_SUBTYPE_SH7706
	bool "Support SH7706 processor"
	select CPU_SH3
	help
	Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU.

	config CPU_SUBTYPE_SH7707
	bool "Support SH7707 processor"
	select CPU_SH3
	help
	Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU.

	config CPU_SUBTYPE_SH7708
	bool "Support SH7708 processor"
	select CPU_SH3
	help
	Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or
	if you have a 100 Mhz SH-3 HD6417708R CPU.

	config CPU_SUBTYPE_SH7709
	bool "Support SH7709 processor"
	select CPU_SH3
	help
	Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU.

	config CPU_SUBTYPE_SH7710
	bool "Support SH7710 processor"
	select CPU_SH3
	select CPU_HAS_DSP
	help
	Select SH7710 if you have a SH3-DSP SH7710 CPU.

	config CPU_SUBTYPE_SH7712
	bool "Support SH7712 processor"
	select CPU_SH3
	select CPU_HAS_DSP
	help
	Select SH7712 if you have a SH3-DSP SH7712 CPU.

	config CPU_SUBTYPE_SH7720
	bool "Support SH7720 processor"
	select CPU_SH3
	select CPU_HAS_DSP
	select SYS_SUPPORTS_SH_CMT
	select ARCH_WANT_OPTIONAL_GPIOLIB
	select USB_OHCI_SH if USB_OHCI_HCD
	select PINCTRL
	help
	Select SH7720 if you have a SH3-DSP SH7720 CPU.

	config CPU_SUBTYPE_SH7721
	bool "Support SH7721 processor"
	select CPU_SH3
	select CPU_HAS_DSP
	select SYS_SUPPORTS_SH_CMT
	select USB_OHCI_SH if USB_OHCI_HCD
	help
	Select SH7721 if you have a SH3-DSP SH7721 CPU.

	# SH-4 Processor Support

	config CPU_SUBTYPE_SH7750
	bool "Support SH7750 processor"
	select CPU_SH4
	help
	Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.

	config CPU_SUBTYPE_SH7091
	bool "Support SH7091 processor"
	select CPU_SH4
	help
	Select SH7091 if you have an SH-4 based Sega device (such as
	the Dreamcast, Naomi, and Naomi 2).

	config CPU_SUBTYPE_SH7750R
	bool "Support SH7750R processor"
	select CPU_SH4

	config CPU_SUBTYPE_SH7750S
	bool "Support SH7750S processor"
	select CPU_SH4

	config CPU_SUBTYPE_SH7751
	bool "Support SH7751 processor"
	select CPU_SH4
	help
	Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU,
	or if you have a HD6417751R CPU.

	config CPU_SUBTYPE_SH7751R
	bool "Support SH7751R processor"
	select CPU_SH4

	config CPU_SUBTYPE_SH7760
	bool "Support SH7760 processor"
	select CPU_SH4

	config CPU_SUBTYPE_SH4_202
	bool "Support SH4-202 processor"
	select CPU_SH4

	# SH-4A Processor Support

	config CPU_SUBTYPE_SH7723
	bool "Support SH7723 processor"
	select CPU_SH4A
	select CPU_SHX2
	select ARCH_SHMOBILE
	select ARCH_SPARSEMEM_ENABLE
	select SYS_SUPPORTS_SH_CMT
	select ARCH_WANT_OPTIONAL_GPIOLIB
	select PINCTRL
	help
	Select SH7723 if you have an SH-MobileR2 CPU.

	config CPU_SUBTYPE_SH7724
	bool "Support SH7724 processor"
	select CPU_SH4A
	select CPU_SHX2
	select ARCH_SHMOBILE
	select ARCH_SPARSEMEM_ENABLE
	select SYS_SUPPORTS_SH_CMT
	select ARCH_WANT_OPTIONAL_GPIOLIB
	select PINCTRL
	help
	Select SH7724 if you have an SH-MobileR2R CPU.

	config CPU_SUBTYPE_SH7734
	bool "Support SH7734 processor"
	select CPU_SH4A
	select CPU_SHX2
	select ARCH_WANT_OPTIONAL_GPIOLIB
	select PINCTRL
	help
	Select SH7734 if you have a SH4A SH7734 CPU.

	config CPU_SUBTYPE_SH7757
	bool "Support SH7757 processor"
	select CPU_SH4A
	select CPU_SHX2
	select ARCH_WANT_OPTIONAL_GPIOLIB
	select PINCTRL
	help
	Select SH7757 if you have a SH4A SH7757 CPU.

	config CPU_SUBTYPE_SH7763
	bool "Support SH7763 processor"
	select CPU_SH4A
	select USB_OHCI_SH if USB_OHCI_HCD
	help
	Select SH7763 if you have a SH4A SH7763(R5S77631) CPU.

	config CPU_SUBTYPE_SH7770
	bool "Support SH7770 processor"
	select CPU_SH4A

	config CPU_SUBTYPE_SH7780
	bool "Support SH7780 processor"
	select CPU_SH4A

	config CPU_SUBTYPE_SH7785
	bool "Support SH7785 processor"
	select CPU_SH4A
	select CPU_SHX2
	select ARCH_SPARSEMEM_ENABLE
	select SYS_SUPPORTS_NUMA
	select ARCH_WANT_OPTIONAL_GPIOLIB
	select PINCTRL

	config CPU_SUBTYPE_SH7786
	bool "Support SH7786 processor"
	select CPU_SH4A
	select CPU_SHX3
	select CPU_HAS_PTEAEX
	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
	select ARCH_WANT_OPTIONAL_GPIOLIB
	select USB_OHCI_SH if USB_OHCI_HCD
	select USB_EHCI_SH if USB_EHCI_HCD
	select PINCTRL

	config CPU_SUBTYPE_SHX3
	bool "Support SH-X3 processor"
	select CPU_SH4A
	select CPU_SHX3
	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
	select ARCH_REQUIRE_GPIOLIB
	select PINCTRL

	# SH4AL-DSP Processor Support

	config CPU_SUBTYPE_SH7343
	bool "Support SH7343 processor"
	select CPU_SH4AL_DSP
	select ARCH_SHMOBILE
	select SYS_SUPPORTS_SH_CMT

	config CPU_SUBTYPE_SH7722
	bool "Support SH7722 processor"
	select CPU_SH4AL_DSP
	select CPU_SHX2
	select ARCH_SHMOBILE
	select ARCH_SPARSEMEM_ENABLE
	select SYS_SUPPORTS_NUMA
	select SYS_SUPPORTS_SH_CMT
	select ARCH_WANT_OPTIONAL_GPIOLIB
	select PINCTRL

	config CPU_SUBTYPE_SH7366
	bool "Support SH7366 processor"
	select CPU_SH4AL_DSP
	select CPU_SHX2
	select ARCH_SHMOBILE
	select ARCH_SPARSEMEM_ENABLE
	select SYS_SUPPORTS_NUMA
	select SYS_SUPPORTS_SH_CMT

	endchoice

	endif

	if SUPERH64

	choice
	prompt "Processor sub-type selection"

	# SH-5 Processor Support

	config CPU_SUBTYPE_SH5_101
	bool "Support SH5-101 processor"
	select CPU_SH5

	config CPU_SUBTYPE_SH5_103
	bool "Support SH5-103 processor"
	select CPU_SH5

	endchoice

	endif

	source "arch/sh/mm/Kconfig"

	source "arch/sh/Kconfig.cpu"

	source "arch/sh/boards/Kconfig"

	menu "Timer and clock configuration"

	config SH_PCLK_FREQ
	int "Peripheral clock frequency (in Hz)"
	depends on SH_CLK_CPG_LEGACY
	default "31250000" if CPU_SUBTYPE_SH7619
	default "33333333" if CPU_SUBTYPE_SH7770 \|\| \
	CPU_SUBTYPE_SH7760 \|\| \
	CPU_SUBTYPE_SH7705 \|\| \
	CPU_SUBTYPE_SH7203 \|\| \
	CPU_SUBTYPE_SH7206 \|\| \
	CPU_SUBTYPE_SH7263 \|\| \
	CPU_SUBTYPE_MXG
	default "60000000" if CPU_SUBTYPE_SH7751 \|\| CPU_SUBTYPE_SH7751R
	default "66000000" if CPU_SUBTYPE_SH4_202
	default "50000000"
	help
	This option is used to specify the peripheral clock frequency.
	This is necessary for determining the reference clock value on
	platforms lacking an RTC.

	config SH_CLK_CPG
	def_bool y

	config SH_CLK_CPG_LEGACY
	depends on SH_CLK_CPG
	def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \
	!CPU_SHX3 && !CPU_SUBTYPE_SH7757 && \
	!CPU_SUBTYPE_SH7734 && !CPU_SUBTYPE_SH7264 && \
	!CPU_SUBTYPE_SH7269

	endmenu

	menu "CPU Frequency scaling"
	source "drivers/cpufreq/Kconfig"
	endmenu

	source "arch/sh/drivers/Kconfig"

	endmenu

	menu "Kernel features"

	source kernel/Kconfig.hz

	config KEXEC
	bool "kexec system call (EXPERIMENTAL)"
	depends on SUPERH32 && MMU
	select KEXEC_CORE
	help
	kexec is a system call that implements the ability to shutdown your
	current kernel, and to start another kernel. It is like a reboot
	but it is independent of the system firmware. And like a reboot
	you can start any kernel with it, not just Linux.

	The name comes from the similarity to the exec system call.

	It is an ongoing process to be certain the hardware in a machine
	is properly shutdown, so do not be surprised if this code does not
	initially work for you. As of this writing the exact hardware
	interface is strongly in flux, so no good recommendation can be
	made.

	config CRASH_DUMP
	bool "kernel crash dumps (EXPERIMENTAL)"
	depends on SUPERH32 && BROKEN_ON_SMP
	help
	Generate crash dump after being started by kexec.
	This should be normally only set in special crash dump kernels
	which are loaded in the main kernel with kexec-tools into
	a specially reserved region and then later executed after
	a crash by kdump/kexec. The crash dump kernel must be compiled
	to a memory address not used by the main kernel using
	PHYSICAL_START.

	For more details see Documentation/kdump/kdump.txt

	config KEXEC_JUMP
	bool "kexec jump (EXPERIMENTAL)"
	depends on SUPERH32 && KEXEC && HIBERNATION
	help
	Jump between original kernel and kexeced kernel and invoke
	code via KEXEC

	config PHYSICAL_START
	hex "Physical address where the kernel is loaded" if (EXPERT \|\| CRASH_DUMP)
	default MEMORY_START
	---help---
	This gives the physical address where the kernel is loaded
	and is ordinarily the same as MEMORY_START.

	Different values are primarily used in the case of kexec on panic
	where the fail safe kernel needs to run at a different address
	than the panic-ed kernel.

	config SECCOMP
	bool "Enable seccomp to safely compute untrusted bytecode"
	depends on PROC_FS
	help
	This kernel feature is useful for number crunching applications
	that may need to compute untrusted bytecode during their
	execution. By using pipes or other transports made available to
	the process as file descriptors supporting the read/write
	syscalls, it's possible to isolate those applications in
	their own address space using seccomp. Once seccomp is
	enabled via prctl, it cannot be disabled and the task is only
	allowed to execute a few safe syscalls defined by each seccomp
	mode.

	If unsure, say N.

	config SMP
	bool "Symmetric multi-processing support"
	depends on SYS_SUPPORTS_SMP
	---help---
	This enables support for systems with more than one CPU. If you have
	a system with only one CPU, say N. If you have a system with more
	than one CPU, say Y.

	If you say N here, the kernel will run on uni- and multiprocessor
	machines, but will use only one CPU of a multiprocessor machine. If
	you say Y here, the kernel will run on many, but not all,
	uniprocessor machines. On a uniprocessor machine, the kernel
	will run faster if you say N here.

	People using multiprocessor machines who say Y here should also say
	Y to "Enhanced Real Time Clock Support", below.

	See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
	available at <http://www.tldp.org/docs.html#howto>.

	If you don't know what to do here, say N.

	config NR_CPUS
	int "Maximum number of CPUs (2-32)"
	range 2 32
	depends on SMP
	default "4" if CPU_SUBTYPE_SHX3
	default "2"
	help
	This allows you to specify the maximum number of CPUs which this
	kernel will support. The maximum supported value is 32 and the
	minimum value which makes sense is 2.

	This is purely to save memory - each supported CPU adds
	approximately eight kilobytes to the kernel image.

	config HOTPLUG_CPU
	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
	depends on SMP
	help
	Say Y here to experiment with turning CPUs off and on. CPUs
	can be controlled through /sys/devices/system/cpu.

	source "kernel/Kconfig.preempt"

	config GUSA
	def_bool y
	depends on !SMP && SUPERH32
	help
	This enables support for gUSA (general UserSpace Atomicity).
	This is the default implementation for both UP and non-ll/sc
	CPUs, and is used by the libc, amongst others.

	For additional information, design information can be found
	in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.

	This should only be disabled for special cases where alternate
	atomicity implementations exist.

	config GUSA_RB
	bool "Implement atomic operations by roll-back (gRB) (EXPERIMENTAL)"
	depends on GUSA && CPU_SH3 \|\| (CPU_SH4 && !CPU_SH4A)
	help
	Enabling this option will allow the kernel to implement some
	atomic operations using a software implementation of load-locked/
	store-conditional (LLSC). On machines which do not have hardware
	LLSC, this should be more efficient than the other alternative of
	disabling interrupts around the atomic sequence.

	config HW_PERF_EVENTS
	bool "Enable hardware performance counter support for perf events"
	depends on PERF_EVENTS && CPU_HAS_PMU
	default y
	help
	Enable hardware performance counter support for perf events. If
	disabled, perf events will use software events only.

	source "drivers/sh/Kconfig"

	endmenu

	menu "Boot options"

	config ZERO_PAGE_OFFSET
	hex
	default "0x00010000" if PAGE_SIZE_64KB \|\| SH_RTS7751R2D \|\| \
	SH_7751_SOLUTION_ENGINE
	default "0x00004000" if PAGE_SIZE_16KB \|\| SH_SH03
	default "0x00002000" if PAGE_SIZE_8KB
	default "0x00001000"
	help
	This sets the default offset of zero page.

	config BOOT_LINK_OFFSET
	hex
	default "0x00210000" if SH_SHMIN
	default "0x00400000" if SH_CAYMAN
	default "0x00810000" if SH_7780_SOLUTION_ENGINE
	default "0x009e0000" if SH_TITAN
	default "0x01800000" if SH_SDK7780
	default "0x02000000" if SH_EDOSK7760
	default "0x00800000"
	help
	This option allows you to set the link address offset of the zImage.
	This can be useful if you are on a board which has a small amount of
	memory.

	config ENTRY_OFFSET
	hex
	default "0x00001000" if PAGE_SIZE_4KB
	default "0x00002000" if PAGE_SIZE_8KB
	default "0x00004000" if PAGE_SIZE_16KB
	default "0x00010000" if PAGE_SIZE_64KB
	default "0x00000000"

	config ROMIMAGE_MMCIF
	bool "Include MMCIF loader in romImage (EXPERIMENTAL)"
	depends on CPU_SUBTYPE_SH7724
	help
	Say Y here to include experimental MMCIF loading code in
	romImage. With this enabled it is possible to write the romImage
	kernel image to an MMC card and boot the kernel straight from
	the reset vector. At reset the processor Mask ROM will load the
	first part of the romImage which in turn loads the rest the kernel
	image to RAM using the MMCIF hardware block.

	choice
	prompt "Kernel command line"
	optional
	default CMDLINE_OVERWRITE
	help
	Setting this option allows the kernel command line arguments
	to be set.

	config CMDLINE_OVERWRITE
	bool "Overwrite bootloader kernel arguments"
	help
	Given string will overwrite any arguments passed in by
	a bootloader.

	config CMDLINE_EXTEND
	bool "Extend bootloader kernel arguments"
	help
	Given string will be concatenated with arguments passed in
	by a bootloader.

	endchoice

	config CMDLINE
	string "Kernel command line arguments string"
	depends on CMDLINE_OVERWRITE \|\| CMDLINE_EXTEND
	default "console=ttySC1,115200"

	endmenu

	menu "Bus options"

	config SUPERHYWAY
	tristate "SuperHyway Bus support"
	depends on CPU_SUBTYPE_SH4_202

	config MAPLE
	bool "Maple Bus support"
	depends on SH_DREAMCAST
	help
	The Maple Bus is SEGA's serial communication bus for peripherals
	on the Dreamcast. Without this bus support you won't be able to
	get your Dreamcast keyboard etc to work, so most users
	probably want to say 'Y' here, unless you are only using the
	Dreamcast with a serial line terminal or a remote network
	connection.

	config PCI
	bool "PCI support"
	depends on SYS_SUPPORTS_PCI
	select PCI_DOMAINS
	select GENERIC_PCI_IOMAP
	select NO_GENERIC_PCI_IOPORT_MAP
	help
	Find out whether you have a PCI motherboard. PCI is the name of a
	bus system, i.e. the way the CPU talks to the other stuff inside
	your box. If you have PCI, say Y, otherwise N.

	config PCI_DOMAINS
	bool

	source "drivers/pci/Kconfig"

	source "drivers/pcmcia/Kconfig"

	endmenu

	menu "Executable file formats"

	source "fs/Kconfig.binfmt"

	endmenu

	menu "Power management options (EXPERIMENTAL)"

	source "kernel/power/Kconfig"

	source "drivers/cpuidle/Kconfig"

	endmenu

	source "net/Kconfig"

	source "drivers/Kconfig"

	source "fs/Kconfig"

	source "arch/sh/Kconfig.debug"

	source "security/Kconfig"

	source "crypto/Kconfig"

	source "lib/Kconfig"