serial: ifx6x60: expanded info available from platform data
Some platform attributes (e.g. max_hz, use_dma) were being intuited
from the modem type. These things should be specified by the platform
data.
Added max_hz, use_dma to ifx_modem_platform_data definition,
replaced is_6160 w/ modem_type, and changed clients accordingly
Signed-off-by: Russ Gorby <russ.gorby@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index ab93763..c42de71 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -8,7 +8,7 @@
* Jan Dumon <j.dumon@option.com>
*
* Copyright (C) 2009, 2010 Intel Corp
- * Russ Gorby <richardx.r.gorby@intel.com>
+ * Russ Gorby <russ.gorby@intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -732,7 +732,7 @@
/*
* setup dma pointers
*/
- if (ifx_dev->is_6160) {
+ if (ifx_dev->use_dma) {
ifx_dev->spi_msg.is_dma_mapped = 1;
ifx_dev->tx_dma = ifx_dev->tx_bus;
ifx_dev->rx_dma = ifx_dev->rx_bus;
@@ -960,7 +960,7 @@
{
int ret;
int srdy;
- struct ifx_modem_platform_data *pl_data = NULL;
+ struct ifx_modem_platform_data *pl_data;
struct ifx_spi_device *ifx_dev;
if (saved_ifx_dev) {
@@ -968,6 +968,12 @@
return -ENODEV;
}
+ pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data;
+ if (!pl_data) {
+ dev_err(&spi->dev, "missing platform data!");
+ return -ENODEV;
+ }
+
/* initialize structure to hold our device variables */
ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL);
if (!ifx_dev) {
@@ -983,7 +989,9 @@
init_timer(&ifx_dev->spi_timer);
ifx_dev->spi_timer.function = ifx_spi_timeout;
ifx_dev->spi_timer.data = (unsigned long)ifx_dev;
- ifx_dev->is_6160 = pl_data->is_6160;
+ ifx_dev->modem = pl_data->modem_type;
+ ifx_dev->use_dma = pl_data->use_dma;
+ ifx_dev->max_hz = pl_data->max_hz;
/* ensure SPI protocol flags are initialized to enable transfer */
ifx_dev->spi_more = 0;
@@ -1025,18 +1033,11 @@
goto error_ret;
}
- pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data;
- if (pl_data) {
- ifx_dev->gpio.reset = pl_data->rst_pmu;
- ifx_dev->gpio.po = pl_data->pwr_on;
- ifx_dev->gpio.mrdy = pl_data->mrdy;
- ifx_dev->gpio.srdy = pl_data->srdy;
- ifx_dev->gpio.reset_out = pl_data->rst_out;
- } else {
- dev_err(&spi->dev, "missing platform data!");
- ret = -ENODEV;
- goto error_ret;
- }
+ ifx_dev->gpio.reset = pl_data->rst_pmu;
+ ifx_dev->gpio.po = pl_data->pwr_on;
+ ifx_dev->gpio.mrdy = pl_data->mrdy;
+ ifx_dev->gpio.srdy = pl_data->srdy;
+ ifx_dev->gpio.reset_out = pl_data->rst_out;
dev_info(&spi->dev, "gpios %d, %d, %d, %d, %d",
ifx_dev->gpio.reset, ifx_dev->gpio.po, ifx_dev->gpio.mrdy,
diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h
index deb7b8d..0ec39b5 100644
--- a/drivers/tty/serial/ifx6x60.h
+++ b/drivers/tty/serial/ifx6x60.h
@@ -88,7 +88,9 @@
dma_addr_t rx_dma;
dma_addr_t tx_dma;
- int is_6160; /* Modem type */
+ int modem; /* Modem type */
+ int use_dma; /* provide dma-able addrs in SPI msg */
+ long max_hz; /* max SPI frequency */
spinlock_t write_lock;
int write_pending;