| /* |
| * arch/ppc64/mm/slb_low.S |
| * |
| * Low-level SLB routines |
| * |
| * Copyright (C) 2004 David Gibson <dwg@au.ibm.com>, IBM |
| * |
| * Based on earlier C version: |
| * Dave Engebretsen and Mike Corrigan {engebret|mikejc}@us.ibm.com |
| * Copyright (c) 2001 Dave Engebretsen |
| * Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/config.h> |
| #include <asm/processor.h> |
| #include <asm/ppc_asm.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/cputable.h> |
| #include <asm/page.h> |
| #include <asm/mmu.h> |
| #include <asm/pgtable.h> |
| |
| /* void slb_allocate_realmode(unsigned long ea); |
| * |
| * Create an SLB entry for the given EA (user or kernel). |
| * r3 = faulting address, r13 = PACA |
| * r9, r10, r11 are clobbered by this function |
| * No other registers are examined or changed. |
| */ |
| _GLOBAL(slb_allocate_realmode) |
| /* r3 = faulting address */ |
| |
| srdi r9,r3,60 /* get region */ |
| srdi r10,r3,28 /* get esid */ |
| cmpldi cr7,r9,0xc /* cmp PAGE_OFFSET for later use */ |
| |
| /* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */ |
| blt cr7,0f /* user or kernel? */ |
| |
| /* kernel address: proto-VSID = ESID */ |
| /* WARNING - MAGIC: we don't use the VSID 0xfffffffff, but |
| * this code will generate the protoVSID 0xfffffffff for the |
| * top segment. That's ok, the scramble below will translate |
| * it to VSID 0, which is reserved as a bad VSID - one which |
| * will never have any pages in it. */ |
| |
| /* Check if hitting the linear mapping of the vmalloc/ioremap |
| * kernel space |
| */ |
| bne cr7,1f |
| |
| /* Linear mapping encoding bits, the "li" instruction below will |
| * be patched by the kernel at boot |
| */ |
| _GLOBAL(slb_miss_kernel_load_linear) |
| li r11,0 |
| b slb_finish_load |
| |
| 1: /* vmalloc/ioremap mapping encoding bits, the "li" instruction below |
| * will be patched by the kernel at boot |
| */ |
| _GLOBAL(slb_miss_kernel_load_virtual) |
| li r11,0 |
| b slb_finish_load |
| |
| |
| 0: /* user address: proto-VSID = context << 15 | ESID. First check |
| * if the address is within the boundaries of the user region |
| */ |
| srdi. r9,r10,USER_ESID_BITS |
| bne- 8f /* invalid ea bits set */ |
| |
| /* Figure out if the segment contains huge pages */ |
| #ifdef CONFIG_HUGETLB_PAGE |
| BEGIN_FTR_SECTION |
| b 1f |
| END_FTR_SECTION_IFCLR(CPU_FTR_16M_PAGE) |
| cmpldi r10,16 |
| |
| lhz r9,PACALOWHTLBAREAS(r13) |
| mr r11,r10 |
| blt 5f |
| |
| lhz r9,PACAHIGHHTLBAREAS(r13) |
| srdi r11,r10,(HTLB_AREA_SHIFT-SID_SHIFT) |
| |
| 5: srd r9,r9,r11 |
| andi. r9,r9,1 |
| beq 1f |
| _GLOBAL(slb_miss_user_load_huge) |
| li r11,0 |
| b 2f |
| 1: |
| #endif /* CONFIG_HUGETLB_PAGE */ |
| |
| _GLOBAL(slb_miss_user_load_normal) |
| li r11,0 |
| |
| 2: |
| ld r9,PACACONTEXTID(r13) |
| rldimi r10,r9,USER_ESID_BITS,0 |
| b slb_finish_load |
| |
| 8: /* invalid EA */ |
| li r10,0 /* BAD_VSID */ |
| li r11,SLB_VSID_USER /* flags don't much matter */ |
| b slb_finish_load |
| |
| #ifdef __DISABLED__ |
| |
| /* void slb_allocate_user(unsigned long ea); |
| * |
| * Create an SLB entry for the given EA (user or kernel). |
| * r3 = faulting address, r13 = PACA |
| * r9, r10, r11 are clobbered by this function |
| * No other registers are examined or changed. |
| * |
| * It is called with translation enabled in order to be able to walk the |
| * page tables. This is not currently used. |
| */ |
| _GLOBAL(slb_allocate_user) |
| /* r3 = faulting address */ |
| srdi r10,r3,28 /* get esid */ |
| |
| crset 4*cr7+lt /* set "user" flag for later */ |
| |
| /* check if we fit in the range covered by the pagetables*/ |
| srdi. r9,r3,PGTABLE_EADDR_SIZE |
| crnot 4*cr0+eq,4*cr0+eq |
| beqlr |
| |
| /* now we need to get to the page tables in order to get the page |
| * size encoding from the PMD. In the future, we'll be able to deal |
| * with 1T segments too by getting the encoding from the PGD instead |
| */ |
| ld r9,PACAPGDIR(r13) |
| cmpldi cr0,r9,0 |
| beqlr |
| rlwinm r11,r10,8,25,28 |
| ldx r9,r9,r11 /* get pgd_t */ |
| cmpldi cr0,r9,0 |
| beqlr |
| rlwinm r11,r10,3,17,28 |
| ldx r9,r9,r11 /* get pmd_t */ |
| cmpldi cr0,r9,0 |
| beqlr |
| |
| /* build vsid flags */ |
| andi. r11,r9,SLB_VSID_LLP |
| ori r11,r11,SLB_VSID_USER |
| |
| /* get context to calculate proto-VSID */ |
| ld r9,PACACONTEXTID(r13) |
| rldimi r10,r9,USER_ESID_BITS,0 |
| |
| /* fall through slb_finish_load */ |
| |
| #endif /* __DISABLED__ */ |
| |
| |
| /* |
| * Finish loading of an SLB entry and return |
| * |
| * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET |
| */ |
| slb_finish_load: |
| ASM_VSID_SCRAMBLE(r10,r9) |
| rldimi r11,r10,SLB_VSID_SHIFT,16 /* combine VSID and flags */ |
| |
| /* r3 = EA, r11 = VSID data */ |
| /* |
| * Find a slot, round robin. Previously we tried to find a |
| * free slot first but that took too long. Unfortunately we |
| * dont have any LRU information to help us choose a slot. |
| */ |
| #ifdef CONFIG_PPC_ISERIES |
| /* |
| * On iSeries, the "bolted" stack segment can be cast out on |
| * shared processor switch so we need to check for a miss on |
| * it and restore it to the right slot. |
| */ |
| ld r9,PACAKSAVE(r13) |
| clrrdi r9,r9,28 |
| clrrdi r3,r3,28 |
| li r10,SLB_NUM_BOLTED-1 /* Stack goes in last bolted slot */ |
| cmpld r9,r3 |
| beq 3f |
| #endif /* CONFIG_PPC_ISERIES */ |
| |
| ld r10,PACASTABRR(r13) |
| addi r10,r10,1 |
| /* use a cpu feature mask if we ever change our slb size */ |
| cmpldi r10,SLB_NUM_ENTRIES |
| |
| blt+ 4f |
| li r10,SLB_NUM_BOLTED |
| |
| 4: |
| std r10,PACASTABRR(r13) |
| |
| 3: |
| rldimi r3,r10,0,36 /* r3= EA[0:35] | entry */ |
| oris r10,r3,SLB_ESID_V@h /* r3 |= SLB_ESID_V */ |
| |
| /* r3 = ESID data, r11 = VSID data */ |
| |
| /* |
| * No need for an isync before or after this slbmte. The exception |
| * we enter with and the rfid we exit with are context synchronizing. |
| */ |
| slbmte r11,r10 |
| |
| /* we're done for kernel addresses */ |
| crclr 4*cr0+eq /* set result to "success" */ |
| bgelr cr7 |
| |
| /* Update the slb cache */ |
| lhz r3,PACASLBCACHEPTR(r13) /* offset = paca->slb_cache_ptr */ |
| cmpldi r3,SLB_CACHE_ENTRIES |
| bge 1f |
| |
| /* still room in the slb cache */ |
| sldi r11,r3,1 /* r11 = offset * sizeof(u16) */ |
| rldicl r10,r10,36,28 /* get low 16 bits of the ESID */ |
| add r11,r11,r13 /* r11 = (u16 *)paca + offset */ |
| sth r10,PACASLBCACHE(r11) /* paca->slb_cache[offset] = esid */ |
| addi r3,r3,1 /* offset++ */ |
| b 2f |
| 1: /* offset >= SLB_CACHE_ENTRIES */ |
| li r3,SLB_CACHE_ENTRIES+1 |
| 2: |
| sth r3,PACASLBCACHEPTR(r13) /* paca->slb_cache_ptr = offset */ |
| crclr 4*cr0+eq /* set result to "success" */ |
| blr |
| |