| /* |
| * ACPI PCI HotPlug glue functions to ACPI CA subsystem |
| * |
| * Copyright (C) 2002,2003 Takayoshi Kochi (t-kochi@bq.jp.nec.com) |
| * Copyright (C) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com) |
| * Copyright (C) 2002,2003 NEC Corporation |
| * Copyright (C) 2003-2005 Matthew Wilcox (matthew.wilcox@hp.com) |
| * Copyright (C) 2003-2005 Hewlett Packard |
| * Copyright (C) 2005 Rajesh Shah (rajesh.shah@intel.com) |
| * Copyright (C) 2005 Intel Corporation |
| * |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Send feedback to <t-kochi@bq.jp.nec.com> |
| * |
| */ |
| |
| /* |
| * Lifetime rules for pci_dev: |
| * - The one in acpiphp_func has its refcount elevated by pci_get_slot() |
| * when the driver is loaded or when an insertion event occurs. It loses |
| * a refcount when its ejected or the driver unloads. |
| * - The one in acpiphp_bridge has its refcount elevated by pci_get_slot() |
| * when the bridge is scanned and it loses a refcount when the bridge |
| * is removed. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/smp_lock.h> |
| #include <asm/semaphore.h> |
| |
| #include "../pci.h" |
| #include "pci_hotplug.h" |
| #include "acpiphp.h" |
| |
| static LIST_HEAD(bridge_list); |
| |
| #define MY_NAME "acpiphp_glue" |
| |
| static void handle_hotplug_event_bridge (acpi_handle, u32, void *); |
| static void handle_hotplug_event_func (acpi_handle, u32, void *); |
| static void acpiphp_sanitize_bus(struct pci_bus *bus); |
| static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus); |
| |
| |
| /* |
| * initialization & terminatation routines |
| */ |
| |
| /** |
| * is_ejectable - determine if a slot is ejectable |
| * @handle: handle to acpi namespace |
| * |
| * Ejectable slot should satisfy at least these conditions: |
| * |
| * 1. has _ADR method |
| * 2. has _EJ0 method |
| * |
| * optionally |
| * |
| * 1. has _STA method |
| * 2. has _PS0 method |
| * 3. has _PS3 method |
| * 4. .. |
| * |
| */ |
| static int is_ejectable(acpi_handle handle) |
| { |
| acpi_status status; |
| acpi_handle tmp; |
| |
| status = acpi_get_handle(handle, "_ADR", &tmp); |
| if (ACPI_FAILURE(status)) { |
| return 0; |
| } |
| |
| status = acpi_get_handle(handle, "_EJ0", &tmp); |
| if (ACPI_FAILURE(status)) { |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| |
| /* callback routine to check the existence of ejectable slots */ |
| static acpi_status |
| is_ejectable_slot(acpi_handle handle, u32 lvl, void *context, void **rv) |
| { |
| int *count = (int *)context; |
| |
| if (is_ejectable(handle)) { |
| (*count)++; |
| /* only one ejectable slot is enough */ |
| return AE_CTRL_TERMINATE; |
| } else { |
| return AE_OK; |
| } |
| } |
| |
| |
| /* callback routine to register each ACPI PCI slot object */ |
| static acpi_status |
| register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) |
| { |
| struct acpiphp_bridge *bridge = (struct acpiphp_bridge *)context; |
| struct acpiphp_slot *slot; |
| struct acpiphp_func *newfunc; |
| acpi_handle tmp; |
| acpi_status status = AE_OK; |
| unsigned long adr, sun; |
| int device, function; |
| static int num_slots = 0; /* XXX if we support I/O node hotplug... */ |
| |
| status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr); |
| |
| if (ACPI_FAILURE(status)) |
| return AE_OK; |
| |
| status = acpi_get_handle(handle, "_EJ0", &tmp); |
| |
| if (ACPI_FAILURE(status)) |
| return AE_OK; |
| |
| device = (adr >> 16) & 0xffff; |
| function = adr & 0xffff; |
| |
| newfunc = kmalloc(sizeof(struct acpiphp_func), GFP_KERNEL); |
| if (!newfunc) |
| return AE_NO_MEMORY; |
| memset(newfunc, 0, sizeof(struct acpiphp_func)); |
| |
| INIT_LIST_HEAD(&newfunc->sibling); |
| newfunc->handle = handle; |
| newfunc->function = function; |
| newfunc->flags = FUNC_HAS_EJ0; |
| |
| if (ACPI_SUCCESS(acpi_get_handle(handle, "_STA", &tmp))) |
| newfunc->flags |= FUNC_HAS_STA; |
| |
| if (ACPI_SUCCESS(acpi_get_handle(handle, "_PS0", &tmp))) |
| newfunc->flags |= FUNC_HAS_PS0; |
| |
| if (ACPI_SUCCESS(acpi_get_handle(handle, "_PS3", &tmp))) |
| newfunc->flags |= FUNC_HAS_PS3; |
| |
| status = acpi_evaluate_integer(handle, "_SUN", NULL, &sun); |
| if (ACPI_FAILURE(status)) |
| sun = -1; |
| |
| /* search for objects that share the same slot */ |
| for (slot = bridge->slots; slot; slot = slot->next) |
| if (slot->device == device) { |
| if (slot->sun != sun) |
| warn("sibling found, but _SUN doesn't match!\n"); |
| break; |
| } |
| |
| if (!slot) { |
| slot = kmalloc(sizeof(struct acpiphp_slot), GFP_KERNEL); |
| if (!slot) { |
| kfree(newfunc); |
| return AE_NO_MEMORY; |
| } |
| |
| memset(slot, 0, sizeof(struct acpiphp_slot)); |
| slot->bridge = bridge; |
| slot->id = num_slots++; |
| slot->device = device; |
| slot->sun = sun; |
| INIT_LIST_HEAD(&slot->funcs); |
| init_MUTEX(&slot->crit_sect); |
| |
| slot->next = bridge->slots; |
| bridge->slots = slot; |
| |
| bridge->nr_slots++; |
| |
| dbg("found ACPI PCI Hotplug slot %d at PCI %04x:%02x:%02x\n", |
| slot->sun, pci_domain_nr(bridge->pci_bus), |
| bridge->pci_bus->number, slot->device); |
| } |
| |
| newfunc->slot = slot; |
| list_add_tail(&newfunc->sibling, &slot->funcs); |
| |
| /* associate corresponding pci_dev */ |
| newfunc->pci_dev = pci_get_slot(bridge->pci_bus, |
| PCI_DEVFN(device, function)); |
| if (newfunc->pci_dev) { |
| slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON); |
| } |
| |
| /* install notify handler */ |
| status = acpi_install_notify_handler(handle, |
| ACPI_SYSTEM_NOTIFY, |
| handle_hotplug_event_func, |
| newfunc); |
| |
| if (ACPI_FAILURE(status)) { |
| err("failed to register interrupt notify handler\n"); |
| return status; |
| } |
| |
| return AE_OK; |
| } |
| |
| |
| /* see if it's worth looking at this bridge */ |
| static int detect_ejectable_slots(acpi_handle *bridge_handle) |
| { |
| acpi_status status; |
| int count; |
| |
| count = 0; |
| |
| /* only check slots defined directly below bridge object */ |
| status = acpi_walk_namespace(ACPI_TYPE_DEVICE, bridge_handle, (u32)1, |
| is_ejectable_slot, (void *)&count, NULL); |
| |
| return count; |
| } |
| |
| |
| /* decode ACPI 2.0 _HPP hot plug parameters */ |
| static void decode_hpp(struct acpiphp_bridge *bridge) |
| { |
| acpi_status status; |
| struct acpi_buffer buffer = { .length = ACPI_ALLOCATE_BUFFER, |
| .pointer = NULL}; |
| union acpi_object *package; |
| int i; |
| |
| /* default numbers */ |
| bridge->hpp.cache_line_size = 0x10; |
| bridge->hpp.latency_timer = 0x40; |
| bridge->hpp.enable_SERR = 0; |
| bridge->hpp.enable_PERR = 0; |
| |
| status = acpi_evaluate_object(bridge->handle, "_HPP", NULL, &buffer); |
| |
| if (ACPI_FAILURE(status)) { |
| dbg("_HPP evaluation failed\n"); |
| return; |
| } |
| |
| package = (union acpi_object *) buffer.pointer; |
| |
| if (!package || package->type != ACPI_TYPE_PACKAGE || |
| package->package.count != 4 || !package->package.elements) { |
| err("invalid _HPP object; ignoring\n"); |
| goto err_exit; |
| } |
| |
| for (i = 0; i < 4; i++) { |
| if (package->package.elements[i].type != ACPI_TYPE_INTEGER) { |
| err("invalid _HPP parameter type; ignoring\n"); |
| goto err_exit; |
| } |
| } |
| |
| bridge->hpp.cache_line_size = package->package.elements[0].integer.value; |
| bridge->hpp.latency_timer = package->package.elements[1].integer.value; |
| bridge->hpp.enable_SERR = package->package.elements[2].integer.value; |
| bridge->hpp.enable_PERR = package->package.elements[3].integer.value; |
| |
| dbg("_HPP parameter = (%02x, %02x, %02x, %02x)\n", |
| bridge->hpp.cache_line_size, |
| bridge->hpp.latency_timer, |
| bridge->hpp.enable_SERR, |
| bridge->hpp.enable_PERR); |
| |
| bridge->flags |= BRIDGE_HAS_HPP; |
| |
| err_exit: |
| kfree(buffer.pointer); |
| } |
| |
| |
| /* initialize miscellaneous stuff for both root and PCI-to-PCI bridge */ |
| static void init_bridge_misc(struct acpiphp_bridge *bridge) |
| { |
| acpi_status status; |
| |
| /* decode ACPI 2.0 _HPP (hot plug parameters) */ |
| decode_hpp(bridge); |
| |
| /* register all slot objects under this bridge */ |
| status = acpi_walk_namespace(ACPI_TYPE_DEVICE, bridge->handle, (u32)1, |
| register_slot, bridge, NULL); |
| |
| /* install notify handler */ |
| if (bridge->type != BRIDGE_TYPE_HOST) { |
| status = acpi_install_notify_handler(bridge->handle, |
| ACPI_SYSTEM_NOTIFY, |
| handle_hotplug_event_bridge, |
| bridge); |
| |
| if (ACPI_FAILURE(status)) { |
| err("failed to register interrupt notify handler\n"); |
| } |
| } |
| |
| list_add(&bridge->list, &bridge_list); |
| } |
| |
| |
| /* allocate and initialize host bridge data structure */ |
| static void add_host_bridge(acpi_handle *handle, struct pci_bus *pci_bus) |
| { |
| struct acpiphp_bridge *bridge; |
| |
| bridge = kmalloc(sizeof(struct acpiphp_bridge), GFP_KERNEL); |
| if (bridge == NULL) |
| return; |
| |
| memset(bridge, 0, sizeof(struct acpiphp_bridge)); |
| |
| bridge->type = BRIDGE_TYPE_HOST; |
| bridge->handle = handle; |
| |
| bridge->pci_bus = pci_bus; |
| |
| spin_lock_init(&bridge->res_lock); |
| |
| init_bridge_misc(bridge); |
| } |
| |
| |
| /* allocate and initialize PCI-to-PCI bridge data structure */ |
| static void add_p2p_bridge(acpi_handle *handle, struct pci_dev *pci_dev) |
| { |
| struct acpiphp_bridge *bridge; |
| |
| bridge = kmalloc(sizeof(struct acpiphp_bridge), GFP_KERNEL); |
| if (bridge == NULL) { |
| err("out of memory\n"); |
| return; |
| } |
| |
| memset(bridge, 0, sizeof(struct acpiphp_bridge)); |
| |
| bridge->type = BRIDGE_TYPE_P2P; |
| bridge->handle = handle; |
| |
| bridge->pci_dev = pci_dev_get(pci_dev); |
| bridge->pci_bus = pci_dev->subordinate; |
| if (!bridge->pci_bus) { |
| err("This is not a PCI-to-PCI bridge!\n"); |
| goto err; |
| } |
| |
| spin_lock_init(&bridge->res_lock); |
| |
| init_bridge_misc(bridge); |
| return; |
| err: |
| pci_dev_put(pci_dev); |
| kfree(bridge); |
| return; |
| } |
| |
| |
| /* callback routine to find P2P bridges */ |
| static acpi_status |
| find_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv) |
| { |
| acpi_status status; |
| acpi_handle dummy_handle; |
| unsigned long tmp; |
| int device, function; |
| struct pci_dev *dev; |
| struct pci_bus *pci_bus = context; |
| |
| status = acpi_get_handle(handle, "_ADR", &dummy_handle); |
| if (ACPI_FAILURE(status)) |
| return AE_OK; /* continue */ |
| |
| status = acpi_evaluate_integer(handle, "_ADR", NULL, &tmp); |
| if (ACPI_FAILURE(status)) { |
| dbg("%s: _ADR evaluation failure\n", __FUNCTION__); |
| return AE_OK; |
| } |
| |
| device = (tmp >> 16) & 0xffff; |
| function = tmp & 0xffff; |
| |
| dev = pci_get_slot(pci_bus, PCI_DEVFN(device, function)); |
| |
| if (!dev || !dev->subordinate) |
| goto out; |
| |
| /* check if this bridge has ejectable slots */ |
| if (detect_ejectable_slots(handle) > 0) { |
| dbg("found PCI-to-PCI bridge at PCI %s\n", pci_name(dev)); |
| add_p2p_bridge(handle, dev); |
| } |
| |
| out: |
| pci_dev_put(dev); |
| return AE_OK; |
| } |
| |
| |
| /* find hot-pluggable slots, and then find P2P bridge */ |
| static int add_bridge(acpi_handle handle) |
| { |
| acpi_status status; |
| unsigned long tmp; |
| int seg, bus; |
| acpi_handle dummy_handle; |
| struct pci_bus *pci_bus; |
| |
| /* if the bridge doesn't have _STA, we assume it is always there */ |
| status = acpi_get_handle(handle, "_STA", &dummy_handle); |
| if (ACPI_SUCCESS(status)) { |
| status = acpi_evaluate_integer(handle, "_STA", NULL, &tmp); |
| if (ACPI_FAILURE(status)) { |
| dbg("%s: _STA evaluation failure\n", __FUNCTION__); |
| return 0; |
| } |
| if ((tmp & ACPI_STA_FUNCTIONING) == 0) |
| /* don't register this object */ |
| return 0; |
| } |
| |
| /* get PCI segment number */ |
| status = acpi_evaluate_integer(handle, "_SEG", NULL, &tmp); |
| |
| seg = ACPI_SUCCESS(status) ? tmp : 0; |
| |
| /* get PCI bus number */ |
| status = acpi_evaluate_integer(handle, "_BBN", NULL, &tmp); |
| |
| if (ACPI_SUCCESS(status)) { |
| bus = tmp; |
| } else { |
| warn("can't get bus number, assuming 0\n"); |
| bus = 0; |
| } |
| |
| pci_bus = pci_find_bus(seg, bus); |
| if (!pci_bus) { |
| err("Can't find bus %04x:%02x\n", seg, bus); |
| return 0; |
| } |
| |
| /* check if this bridge has ejectable slots */ |
| if (detect_ejectable_slots(handle) > 0) { |
| dbg("found PCI host-bus bridge with hot-pluggable slots\n"); |
| add_host_bridge(handle, pci_bus); |
| return 0; |
| } |
| |
| /* search P2P bridges under this host bridge */ |
| status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, |
| find_p2p_bridge, pci_bus, NULL); |
| |
| if (ACPI_FAILURE(status)) |
| warn("find_p2p_bridge faied (error code = 0x%x)\n",status); |
| |
| return 0; |
| } |
| |
| static struct acpiphp_bridge *acpiphp_handle_to_bridge(acpi_handle handle) |
| { |
| struct list_head *head; |
| list_for_each(head, &bridge_list) { |
| struct acpiphp_bridge *bridge = list_entry(head, |
| struct acpiphp_bridge, list); |
| if (bridge->handle == handle) |
| return bridge; |
| } |
| |
| return NULL; |
| } |
| |
| static void cleanup_bridge(struct acpiphp_bridge *bridge) |
| { |
| struct list_head *list, *tmp; |
| struct acpiphp_slot *slot; |
| acpi_status status; |
| acpi_handle handle = bridge->handle; |
| |
| status = acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, |
| handle_hotplug_event_bridge); |
| if (ACPI_FAILURE(status)) |
| err("failed to remove notify handler\n"); |
| |
| slot = bridge->slots; |
| while (slot) { |
| struct acpiphp_slot *next = slot->next; |
| list_for_each_safe (list, tmp, &slot->funcs) { |
| struct acpiphp_func *func; |
| func = list_entry(list, struct acpiphp_func, sibling); |
| status = acpi_remove_notify_handler(func->handle, |
| ACPI_SYSTEM_NOTIFY, |
| handle_hotplug_event_func); |
| if (ACPI_FAILURE(status)) |
| err("failed to remove notify handler\n"); |
| pci_dev_put(func->pci_dev); |
| list_del(list); |
| kfree(func); |
| } |
| kfree(slot); |
| slot = next; |
| } |
| |
| pci_dev_put(bridge->pci_dev); |
| list_del(&bridge->list); |
| kfree(bridge); |
| } |
| |
| static acpi_status |
| cleanup_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv) |
| { |
| struct acpiphp_bridge *bridge; |
| |
| if (!(bridge = acpiphp_handle_to_bridge(handle))) |
| return AE_OK; |
| cleanup_bridge(bridge); |
| return AE_OK; |
| } |
| |
| static void remove_bridge(acpi_handle handle) |
| { |
| struct acpiphp_bridge *bridge; |
| |
| bridge = acpiphp_handle_to_bridge(handle); |
| if (bridge) { |
| cleanup_bridge(bridge); |
| } else { |
| /* clean-up p2p bridges under this host bridge */ |
| acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, |
| (u32)1, cleanup_p2p_bridge, NULL, NULL); |
| } |
| } |
| |
| static struct pci_dev * get_apic_pci_info(acpi_handle handle) |
| { |
| struct acpi_pci_id id; |
| struct pci_bus *bus; |
| struct pci_dev *dev; |
| |
| if (ACPI_FAILURE(acpi_get_pci_id(handle, &id))) |
| return NULL; |
| |
| bus = pci_find_bus(id.segment, id.bus); |
| if (!bus) |
| return NULL; |
| |
| dev = pci_get_slot(bus, PCI_DEVFN(id.device, id.function)); |
| if (!dev) |
| return NULL; |
| |
| if ((dev->class != PCI_CLASS_SYSTEM_PIC_IOAPIC) && |
| (dev->class != PCI_CLASS_SYSTEM_PIC_IOXAPIC)) |
| { |
| pci_dev_put(dev); |
| return NULL; |
| } |
| |
| return dev; |
| } |
| |
| static int get_gsi_base(acpi_handle handle, u32 *gsi_base) |
| { |
| acpi_status status; |
| int result = -1; |
| unsigned long gsb; |
| struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; |
| union acpi_object *obj; |
| void *table; |
| |
| status = acpi_evaluate_integer(handle, "_GSB", NULL, &gsb); |
| if (ACPI_SUCCESS(status)) { |
| *gsi_base = (u32)gsb; |
| return 0; |
| } |
| |
| status = acpi_evaluate_object(handle, "_MAT", NULL, &buffer); |
| if (ACPI_FAILURE(status) || !buffer.length || !buffer.pointer) |
| return -1; |
| |
| obj = buffer.pointer; |
| if (obj->type != ACPI_TYPE_BUFFER) |
| goto out; |
| |
| table = obj->buffer.pointer; |
| switch (((acpi_table_entry_header *)table)->type) { |
| case ACPI_MADT_IOSAPIC: |
| *gsi_base = ((struct acpi_table_iosapic *)table)->global_irq_base; |
| result = 0; |
| break; |
| case ACPI_MADT_IOAPIC: |
| *gsi_base = ((struct acpi_table_ioapic *)table)->global_irq_base; |
| result = 0; |
| break; |
| default: |
| break; |
| } |
| out: |
| acpi_os_free(buffer.pointer); |
| return result; |
| } |
| |
| static acpi_status |
| ioapic_add(acpi_handle handle, u32 lvl, void *context, void **rv) |
| { |
| acpi_status status; |
| unsigned long sta; |
| acpi_handle tmp; |
| struct pci_dev *pdev; |
| u32 gsi_base; |
| u64 phys_addr; |
| |
| /* Evaluate _STA if present */ |
| status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); |
| if (ACPI_SUCCESS(status) && sta != ACPI_STA_ALL) |
| return AE_CTRL_DEPTH; |
| |
| /* Scan only PCI bus scope */ |
| status = acpi_get_handle(handle, "_HID", &tmp); |
| if (ACPI_SUCCESS(status)) |
| return AE_CTRL_DEPTH; |
| |
| if (get_gsi_base(handle, &gsi_base)) |
| return AE_OK; |
| |
| pdev = get_apic_pci_info(handle); |
| if (!pdev) |
| return AE_OK; |
| |
| if (pci_enable_device(pdev)) { |
| pci_dev_put(pdev); |
| return AE_OK; |
| } |
| |
| pci_set_master(pdev); |
| |
| if (pci_request_region(pdev, 0, "I/O APIC(acpiphp)")) { |
| pci_disable_device(pdev); |
| pci_dev_put(pdev); |
| return AE_OK; |
| } |
| |
| phys_addr = pci_resource_start(pdev, 0); |
| if (acpi_register_ioapic(handle, phys_addr, gsi_base)) { |
| pci_release_region(pdev, 0); |
| pci_disable_device(pdev); |
| pci_dev_put(pdev); |
| return AE_OK; |
| } |
| |
| return AE_OK; |
| } |
| |
| static int acpiphp_configure_ioapics(acpi_handle handle) |
| { |
| acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, |
| ACPI_UINT32_MAX, ioapic_add, NULL, NULL); |
| return 0; |
| } |
| |
| static int power_on_slot(struct acpiphp_slot *slot) |
| { |
| acpi_status status; |
| struct acpiphp_func *func; |
| struct list_head *l; |
| int retval = 0; |
| |
| /* if already enabled, just skip */ |
| if (slot->flags & SLOT_POWEREDON) |
| goto err_exit; |
| |
| list_for_each (l, &slot->funcs) { |
| func = list_entry(l, struct acpiphp_func, sibling); |
| |
| if (func->flags & FUNC_HAS_PS0) { |
| dbg("%s: executing _PS0\n", __FUNCTION__); |
| status = acpi_evaluate_object(func->handle, "_PS0", NULL, NULL); |
| if (ACPI_FAILURE(status)) { |
| warn("%s: _PS0 failed\n", __FUNCTION__); |
| retval = -1; |
| goto err_exit; |
| } else |
| break; |
| } |
| } |
| |
| /* TBD: evaluate _STA to check if the slot is enabled */ |
| |
| slot->flags |= SLOT_POWEREDON; |
| |
| err_exit: |
| return retval; |
| } |
| |
| |
| static int power_off_slot(struct acpiphp_slot *slot) |
| { |
| acpi_status status; |
| struct acpiphp_func *func; |
| struct list_head *l; |
| |
| int retval = 0; |
| |
| /* if already disabled, just skip */ |
| if ((slot->flags & SLOT_POWEREDON) == 0) |
| goto err_exit; |
| |
| list_for_each (l, &slot->funcs) { |
| func = list_entry(l, struct acpiphp_func, sibling); |
| |
| if (func->flags & FUNC_HAS_PS3) { |
| status = acpi_evaluate_object(func->handle, "_PS3", NULL, NULL); |
| if (ACPI_FAILURE(status)) { |
| warn("%s: _PS3 failed\n", __FUNCTION__); |
| retval = -1; |
| goto err_exit; |
| } else |
| break; |
| } |
| } |
| |
| /* TBD: evaluate _STA to check if the slot is disabled */ |
| |
| slot->flags &= (~SLOT_POWEREDON); |
| |
| err_exit: |
| return retval; |
| } |
| |
| |
| /** |
| * enable_device - enable, configure a slot |
| * @slot: slot to be enabled |
| * |
| * This function should be called per *physical slot*, |
| * not per each slot object in ACPI namespace. |
| * |
| */ |
| static int enable_device(struct acpiphp_slot *slot) |
| { |
| struct pci_dev *dev; |
| struct pci_bus *bus = slot->bridge->pci_bus; |
| struct list_head *l; |
| struct acpiphp_func *func; |
| int retval = 0; |
| int num, max, pass; |
| |
| if (slot->flags & SLOT_ENABLED) |
| goto err_exit; |
| |
| /* sanity check: dev should be NULL when hot-plugged in */ |
| dev = pci_get_slot(bus, PCI_DEVFN(slot->device, 0)); |
| if (dev) { |
| /* This case shouldn't happen */ |
| err("pci_dev structure already exists.\n"); |
| pci_dev_put(dev); |
| retval = -1; |
| goto err_exit; |
| } |
| |
| num = pci_scan_slot(bus, PCI_DEVFN(slot->device, 0)); |
| if (num == 0) { |
| err("No new device found\n"); |
| retval = -1; |
| goto err_exit; |
| } |
| |
| max = bus->secondary; |
| for (pass = 0; pass < 2; pass++) { |
| list_for_each_entry(dev, &bus->devices, bus_list) { |
| if (PCI_SLOT(dev->devfn) != slot->device) |
| continue; |
| if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || |
| dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) { |
| max = pci_scan_bridge(bus, dev, max, pass); |
| if (pass && dev->subordinate) |
| pci_bus_size_bridges(dev->subordinate); |
| } |
| } |
| } |
| |
| pci_bus_assign_resources(bus); |
| acpiphp_sanitize_bus(bus); |
| pci_enable_bridges(bus); |
| pci_bus_add_devices(bus); |
| acpiphp_set_hpp_values(DEVICE_ACPI_HANDLE(&bus->self->dev), bus); |
| acpiphp_configure_ioapics(DEVICE_ACPI_HANDLE(&bus->self->dev)); |
| |
| /* associate pci_dev to our representation */ |
| list_for_each (l, &slot->funcs) { |
| func = list_entry(l, struct acpiphp_func, sibling); |
| func->pci_dev = pci_get_slot(bus, PCI_DEVFN(slot->device, |
| func->function)); |
| } |
| |
| slot->flags |= SLOT_ENABLED; |
| |
| err_exit: |
| return retval; |
| } |
| |
| |
| /** |
| * disable_device - disable a slot |
| */ |
| static int disable_device(struct acpiphp_slot *slot) |
| { |
| int retval = 0; |
| struct acpiphp_func *func; |
| struct list_head *l; |
| |
| /* is this slot already disabled? */ |
| if (!(slot->flags & SLOT_ENABLED)) |
| goto err_exit; |
| |
| list_for_each (l, &slot->funcs) { |
| func = list_entry(l, struct acpiphp_func, sibling); |
| if (!func->pci_dev) |
| continue; |
| |
| pci_remove_bus_device(func->pci_dev); |
| pci_dev_put(func->pci_dev); |
| func->pci_dev = NULL; |
| } |
| |
| slot->flags &= (~SLOT_ENABLED); |
| |
| err_exit: |
| return retval; |
| } |
| |
| |
| /** |
| * get_slot_status - get ACPI slot status |
| * |
| * if a slot has _STA for each function and if any one of them |
| * returned non-zero status, return it |
| * |
| * if a slot doesn't have _STA and if any one of its functions' |
| * configuration space is configured, return 0x0f as a _STA |
| * |
| * otherwise return 0 |
| */ |
| static unsigned int get_slot_status(struct acpiphp_slot *slot) |
| { |
| acpi_status status; |
| unsigned long sta = 0; |
| u32 dvid; |
| struct list_head *l; |
| struct acpiphp_func *func; |
| |
| list_for_each (l, &slot->funcs) { |
| func = list_entry(l, struct acpiphp_func, sibling); |
| |
| if (func->flags & FUNC_HAS_STA) { |
| status = acpi_evaluate_integer(func->handle, "_STA", NULL, &sta); |
| if (ACPI_SUCCESS(status) && sta) |
| break; |
| } else { |
| pci_bus_read_config_dword(slot->bridge->pci_bus, |
| PCI_DEVFN(slot->device, |
| func->function), |
| PCI_VENDOR_ID, &dvid); |
| if (dvid != 0xffffffff) { |
| sta = ACPI_STA_ALL; |
| break; |
| } |
| } |
| } |
| |
| return (unsigned int)sta; |
| } |
| |
| /** |
| * acpiphp_eject_slot - physically eject the slot |
| */ |
| static int acpiphp_eject_slot(struct acpiphp_slot *slot) |
| { |
| acpi_status status; |
| struct acpiphp_func *func; |
| struct list_head *l; |
| struct acpi_object_list arg_list; |
| union acpi_object arg; |
| |
| list_for_each (l, &slot->funcs) { |
| func = list_entry(l, struct acpiphp_func, sibling); |
| |
| /* We don't want to call _EJ0 on non-existing functions. */ |
| if ((func->flags & FUNC_HAS_EJ0)) { |
| /* _EJ0 method take one argument */ |
| arg_list.count = 1; |
| arg_list.pointer = &arg; |
| arg.type = ACPI_TYPE_INTEGER; |
| arg.integer.value = 1; |
| |
| status = acpi_evaluate_object(func->handle, "_EJ0", &arg_list, NULL); |
| if (ACPI_FAILURE(status)) { |
| warn("%s: _EJ0 failed\n", __FUNCTION__); |
| return -1; |
| } else |
| break; |
| } |
| } |
| return 0; |
| } |
| |
| /** |
| * acpiphp_check_bridge - re-enumerate devices |
| * |
| * Iterate over all slots under this bridge and make sure that if a |
| * card is present they are enabled, and if not they are disabled. |
| */ |
| static int acpiphp_check_bridge(struct acpiphp_bridge *bridge) |
| { |
| struct acpiphp_slot *slot; |
| int retval = 0; |
| int enabled, disabled; |
| |
| enabled = disabled = 0; |
| |
| for (slot = bridge->slots; slot; slot = slot->next) { |
| unsigned int status = get_slot_status(slot); |
| if (slot->flags & SLOT_ENABLED) { |
| if (status == ACPI_STA_ALL) |
| continue; |
| retval = acpiphp_disable_slot(slot); |
| if (retval) { |
| err("Error occurred in disabling\n"); |
| goto err_exit; |
| } else { |
| acpiphp_eject_slot(slot); |
| } |
| disabled++; |
| } else { |
| if (status != ACPI_STA_ALL) |
| continue; |
| retval = acpiphp_enable_slot(slot); |
| if (retval) { |
| err("Error occurred in enabling\n"); |
| goto err_exit; |
| } |
| enabled++; |
| } |
| } |
| |
| dbg("%s: %d enabled, %d disabled\n", __FUNCTION__, enabled, disabled); |
| |
| err_exit: |
| return retval; |
| } |
| |
| static void program_hpp(struct pci_dev *dev, struct acpiphp_bridge *bridge) |
| { |
| u16 pci_cmd, pci_bctl; |
| struct pci_dev *cdev; |
| |
| /* Program hpp values for this device */ |
| if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL || |
| (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && |
| (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI))) |
| return; |
| pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, |
| bridge->hpp.cache_line_size); |
| pci_write_config_byte(dev, PCI_LATENCY_TIMER, |
| bridge->hpp.latency_timer); |
| pci_read_config_word(dev, PCI_COMMAND, &pci_cmd); |
| if (bridge->hpp.enable_SERR) |
| pci_cmd |= PCI_COMMAND_SERR; |
| else |
| pci_cmd &= ~PCI_COMMAND_SERR; |
| if (bridge->hpp.enable_PERR) |
| pci_cmd |= PCI_COMMAND_PARITY; |
| else |
| pci_cmd &= ~PCI_COMMAND_PARITY; |
| pci_write_config_word(dev, PCI_COMMAND, pci_cmd); |
| |
| /* Program bridge control value and child devices */ |
| if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { |
| pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, |
| bridge->hpp.latency_timer); |
| pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl); |
| if (bridge->hpp.enable_SERR) |
| pci_bctl |= PCI_BRIDGE_CTL_SERR; |
| else |
| pci_bctl &= ~PCI_BRIDGE_CTL_SERR; |
| if (bridge->hpp.enable_PERR) |
| pci_bctl |= PCI_BRIDGE_CTL_PARITY; |
| else |
| pci_bctl &= ~PCI_BRIDGE_CTL_PARITY; |
| pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl); |
| if (dev->subordinate) { |
| list_for_each_entry(cdev, &dev->subordinate->devices, |
| bus_list) |
| program_hpp(cdev, bridge); |
| } |
| } |
| } |
| |
| static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus) |
| { |
| struct acpiphp_bridge bridge; |
| struct pci_dev *dev; |
| |
| memset(&bridge, 0, sizeof(bridge)); |
| bridge.handle = handle; |
| decode_hpp(&bridge); |
| list_for_each_entry(dev, &bus->devices, bus_list) |
| program_hpp(dev, &bridge); |
| |
| } |
| |
| /* |
| * Remove devices for which we could not assign resources, call |
| * arch specific code to fix-up the bus |
| */ |
| static void acpiphp_sanitize_bus(struct pci_bus *bus) |
| { |
| struct pci_dev *dev; |
| int i; |
| unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM; |
| |
| list_for_each_entry(dev, &bus->devices, bus_list) { |
| for (i=0; i<PCI_BRIDGE_RESOURCES; i++) { |
| struct resource *res = &dev->resource[i]; |
| if ((res->flags & type_mask) && !res->start && |
| res->end) { |
| /* Could not assign a required resources |
| * for this device, remove it */ |
| pci_remove_bus_device(dev); |
| break; |
| } |
| } |
| } |
| } |
| |
| /* Program resources in newly inserted bridge */ |
| static int acpiphp_configure_bridge (acpi_handle handle) |
| { |
| struct acpi_pci_id pci_id; |
| struct pci_bus *bus; |
| |
| if (ACPI_FAILURE(acpi_get_pci_id(handle, &pci_id))) { |
| err("cannot get PCI domain and bus number for bridge\n"); |
| return -EINVAL; |
| } |
| bus = pci_find_bus(pci_id.segment, pci_id.bus); |
| if (!bus) { |
| err("cannot find bus %d:%d\n", |
| pci_id.segment, pci_id.bus); |
| return -EINVAL; |
| } |
| |
| pci_bus_size_bridges(bus); |
| pci_bus_assign_resources(bus); |
| acpiphp_sanitize_bus(bus); |
| acpiphp_set_hpp_values(handle, bus); |
| pci_enable_bridges(bus); |
| acpiphp_configure_ioapics(handle); |
| return 0; |
| } |
| |
| static void handle_bridge_insertion(acpi_handle handle, u32 type) |
| { |
| struct acpi_device *device, *pdevice; |
| acpi_handle phandle; |
| |
| if ((type != ACPI_NOTIFY_BUS_CHECK) && |
| (type != ACPI_NOTIFY_DEVICE_CHECK)) { |
| err("unexpected notification type %d\n", type); |
| return; |
| } |
| |
| acpi_get_parent(handle, &phandle); |
| if (acpi_bus_get_device(phandle, &pdevice)) { |
| dbg("no parent device, assuming NULL\n"); |
| pdevice = NULL; |
| } |
| if (acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE)) { |
| err("cannot add bridge to acpi list\n"); |
| return; |
| } |
| if (!acpiphp_configure_bridge(handle) && |
| !acpi_bus_start(device)) |
| add_bridge(handle); |
| else |
| err("cannot configure and start bridge\n"); |
| |
| } |
| |
| /* |
| * ACPI event handlers |
| */ |
| |
| /** |
| * handle_hotplug_event_bridge - handle ACPI event on bridges |
| * |
| * @handle: Notify()'ed acpi_handle |
| * @type: Notify code |
| * @context: pointer to acpiphp_bridge structure |
| * |
| * handles ACPI event notification on {host,p2p} bridges |
| * |
| */ |
| static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *context) |
| { |
| struct acpiphp_bridge *bridge; |
| char objname[64]; |
| struct acpi_buffer buffer = { .length = sizeof(objname), |
| .pointer = objname }; |
| struct acpi_device *device; |
| |
| if (acpi_bus_get_device(handle, &device)) { |
| /* This bridge must have just been physically inserted */ |
| handle_bridge_insertion(handle, type); |
| return; |
| } |
| |
| bridge = acpiphp_handle_to_bridge(handle); |
| if (!bridge) { |
| err("cannot get bridge info\n"); |
| return; |
| } |
| |
| acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer); |
| |
| switch (type) { |
| case ACPI_NOTIFY_BUS_CHECK: |
| /* bus re-enumerate */ |
| dbg("%s: Bus check notify on %s\n", __FUNCTION__, objname); |
| acpiphp_check_bridge(bridge); |
| break; |
| |
| case ACPI_NOTIFY_DEVICE_CHECK: |
| /* device check */ |
| dbg("%s: Device check notify on %s\n", __FUNCTION__, objname); |
| acpiphp_check_bridge(bridge); |
| break; |
| |
| case ACPI_NOTIFY_DEVICE_WAKE: |
| /* wake event */ |
| dbg("%s: Device wake notify on %s\n", __FUNCTION__, objname); |
| break; |
| |
| case ACPI_NOTIFY_EJECT_REQUEST: |
| /* request device eject */ |
| dbg("%s: Device eject notify on %s\n", __FUNCTION__, objname); |
| break; |
| |
| case ACPI_NOTIFY_FREQUENCY_MISMATCH: |
| printk(KERN_ERR "Device %s cannot be configured due" |
| " to a frequency mismatch\n", objname); |
| break; |
| |
| case ACPI_NOTIFY_BUS_MODE_MISMATCH: |
| printk(KERN_ERR "Device %s cannot be configured due" |
| " to a bus mode mismatch\n", objname); |
| break; |
| |
| case ACPI_NOTIFY_POWER_FAULT: |
| printk(KERN_ERR "Device %s has suffered a power fault\n", |
| objname); |
| break; |
| |
| default: |
| warn("notify_handler: unknown event type 0x%x for %s\n", type, objname); |
| break; |
| } |
| } |
| |
| /** |
| * handle_hotplug_event_func - handle ACPI event on functions (i.e. slots) |
| * |
| * @handle: Notify()'ed acpi_handle |
| * @type: Notify code |
| * @context: pointer to acpiphp_func structure |
| * |
| * handles ACPI event notification on slots |
| * |
| */ |
| static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context) |
| { |
| struct acpiphp_func *func; |
| char objname[64]; |
| struct acpi_buffer buffer = { .length = sizeof(objname), |
| .pointer = objname }; |
| |
| acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer); |
| |
| func = (struct acpiphp_func *)context; |
| |
| switch (type) { |
| case ACPI_NOTIFY_BUS_CHECK: |
| /* bus re-enumerate */ |
| dbg("%s: Bus check notify on %s\n", __FUNCTION__, objname); |
| acpiphp_enable_slot(func->slot); |
| break; |
| |
| case ACPI_NOTIFY_DEVICE_CHECK: |
| /* device check : re-enumerate from parent bus */ |
| dbg("%s: Device check notify on %s\n", __FUNCTION__, objname); |
| acpiphp_check_bridge(func->slot->bridge); |
| break; |
| |
| case ACPI_NOTIFY_DEVICE_WAKE: |
| /* wake event */ |
| dbg("%s: Device wake notify on %s\n", __FUNCTION__, objname); |
| break; |
| |
| case ACPI_NOTIFY_EJECT_REQUEST: |
| /* request device eject */ |
| dbg("%s: Device eject notify on %s\n", __FUNCTION__, objname); |
| if (!(acpiphp_disable_slot(func->slot))) |
| acpiphp_eject_slot(func->slot); |
| break; |
| |
| default: |
| warn("notify_handler: unknown event type 0x%x for %s\n", type, objname); |
| break; |
| } |
| } |
| |
| static int is_root_bridge(acpi_handle handle) |
| { |
| acpi_status status; |
| struct acpi_device_info *info; |
| struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; |
| int i; |
| |
| status = acpi_get_object_info(handle, &buffer); |
| if (ACPI_SUCCESS(status)) { |
| info = buffer.pointer; |
| if ((info->valid & ACPI_VALID_HID) && |
| !strcmp(PCI_ROOT_HID_STRING, |
| info->hardware_id.value)) { |
| acpi_os_free(buffer.pointer); |
| return 1; |
| } |
| if (info->valid & ACPI_VALID_CID) { |
| for (i=0; i < info->compatibility_id.count; i++) { |
| if (!strcmp(PCI_ROOT_HID_STRING, |
| info->compatibility_id.id[i].value)) { |
| acpi_os_free(buffer.pointer); |
| return 1; |
| } |
| } |
| } |
| } |
| return 0; |
| } |
| |
| static acpi_status |
| find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv) |
| { |
| int *count = (int *)context; |
| |
| if (is_root_bridge(handle)) { |
| acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, |
| handle_hotplug_event_bridge, NULL); |
| (*count)++; |
| } |
| return AE_OK ; |
| } |
| |
| static struct acpi_pci_driver acpi_pci_hp_driver = { |
| .add = add_bridge, |
| .remove = remove_bridge, |
| }; |
| |
| /** |
| * acpiphp_glue_init - initializes all PCI hotplug - ACPI glue data structures |
| * |
| */ |
| int __init acpiphp_glue_init(void) |
| { |
| int num = 0; |
| |
| acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, |
| ACPI_UINT32_MAX, find_root_bridges, &num, NULL); |
| |
| if (num <= 0) |
| return -1; |
| else |
| acpi_pci_register_driver(&acpi_pci_hp_driver); |
| |
| return 0; |
| } |
| |
| |
| /** |
| * acpiphp_glue_exit - terminates all PCI hotplug - ACPI glue data structures |
| * |
| * This function frees all data allocated in acpiphp_glue_init() |
| */ |
| void __exit acpiphp_glue_exit(void) |
| { |
| acpi_pci_unregister_driver(&acpi_pci_hp_driver); |
| } |
| |
| |
| /** |
| * acpiphp_get_num_slots - count number of slots in a system |
| */ |
| int __init acpiphp_get_num_slots(void) |
| { |
| struct list_head *node; |
| struct acpiphp_bridge *bridge; |
| int num_slots; |
| |
| num_slots = 0; |
| |
| list_for_each (node, &bridge_list) { |
| bridge = (struct acpiphp_bridge *)node; |
| dbg("Bus %04x:%02x has %d slot%s\n", |
| pci_domain_nr(bridge->pci_bus), |
| bridge->pci_bus->number, bridge->nr_slots, |
| bridge->nr_slots == 1 ? "" : "s"); |
| num_slots += bridge->nr_slots; |
| } |
| |
| dbg("Total %d slots\n", num_slots); |
| return num_slots; |
| } |
| |
| |
| #if 0 |
| /** |
| * acpiphp_for_each_slot - call function for each slot |
| * @fn: callback function |
| * @data: context to be passed to callback function |
| * |
| */ |
| static int acpiphp_for_each_slot(acpiphp_callback fn, void *data) |
| { |
| struct list_head *node; |
| struct acpiphp_bridge *bridge; |
| struct acpiphp_slot *slot; |
| int retval = 0; |
| |
| list_for_each (node, &bridge_list) { |
| bridge = (struct acpiphp_bridge *)node; |
| for (slot = bridge->slots; slot; slot = slot->next) { |
| retval = fn(slot, data); |
| if (!retval) |
| goto err_exit; |
| } |
| } |
| |
| err_exit: |
| return retval; |
| } |
| #endif |
| |
| /* search matching slot from id */ |
| struct acpiphp_slot *get_slot_from_id(int id) |
| { |
| struct list_head *node; |
| struct acpiphp_bridge *bridge; |
| struct acpiphp_slot *slot; |
| |
| list_for_each (node, &bridge_list) { |
| bridge = (struct acpiphp_bridge *)node; |
| for (slot = bridge->slots; slot; slot = slot->next) |
| if (slot->id == id) |
| return slot; |
| } |
| |
| /* should never happen! */ |
| err("%s: no object for id %d\n", __FUNCTION__, id); |
| WARN_ON(1); |
| return NULL; |
| } |
| |
| |
| /** |
| * acpiphp_enable_slot - power on slot |
| */ |
| int acpiphp_enable_slot(struct acpiphp_slot *slot) |
| { |
| int retval; |
| |
| down(&slot->crit_sect); |
| |
| /* wake up all functions */ |
| retval = power_on_slot(slot); |
| if (retval) |
| goto err_exit; |
| |
| if (get_slot_status(slot) == ACPI_STA_ALL) |
| /* configure all functions */ |
| retval = enable_device(slot); |
| |
| err_exit: |
| up(&slot->crit_sect); |
| return retval; |
| } |
| |
| /** |
| * acpiphp_disable_slot - power off slot |
| */ |
| int acpiphp_disable_slot(struct acpiphp_slot *slot) |
| { |
| int retval = 0; |
| |
| down(&slot->crit_sect); |
| |
| /* unconfigure all functions */ |
| retval = disable_device(slot); |
| if (retval) |
| goto err_exit; |
| |
| /* power off all functions */ |
| retval = power_off_slot(slot); |
| if (retval) |
| goto err_exit; |
| |
| err_exit: |
| up(&slot->crit_sect); |
| return retval; |
| } |
| |
| |
| /* |
| * slot enabled: 1 |
| * slot disabled: 0 |
| */ |
| u8 acpiphp_get_power_status(struct acpiphp_slot *slot) |
| { |
| return (slot->flags & SLOT_POWEREDON); |
| } |
| |
| |
| /* |
| * latch closed: 1 |
| * latch open: 0 |
| */ |
| u8 acpiphp_get_latch_status(struct acpiphp_slot *slot) |
| { |
| unsigned int sta; |
| |
| sta = get_slot_status(slot); |
| |
| return (sta & ACPI_STA_SHOW_IN_UI) ? 1 : 0; |
| } |
| |
| |
| /* |
| * adapter presence : 1 |
| * absence : 0 |
| */ |
| u8 acpiphp_get_adapter_status(struct acpiphp_slot *slot) |
| { |
| unsigned int sta; |
| |
| sta = get_slot_status(slot); |
| |
| return (sta == 0) ? 0 : 1; |
| } |
| |
| |
| /* |
| * pci address (seg/bus/dev) |
| */ |
| u32 acpiphp_get_address(struct acpiphp_slot *slot) |
| { |
| u32 address; |
| struct pci_bus *pci_bus = slot->bridge->pci_bus; |
| |
| address = (pci_domain_nr(pci_bus) << 16) | |
| (pci_bus->number << 8) | |
| slot->device; |
| |
| return address; |
| } |