iwlwifi: send cmd to uCode to configure valid tx antenna
In order for uCode to select the valid antennas for transmit, driver
need to configure the allowed tx antennas through host command.
The TX_ANT_CONFIGURATION_CMD should be used for 5000 series and up
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 75fa55d..68d97f5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1450,6 +1450,24 @@
return max_rssi - agc - IWL49_RSSI_OFFSET;
}
+static int iwl5000_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant)
+{
+ struct iwl_tx_ant_config_cmd tx_ant_cmd = {
+ .valid = cpu_to_le32(valid_tx_ant),
+ };
+
+ if (IWL_UCODE_API(priv->ucode_ver) > 1) {
+ IWL_DEBUG_HC(priv, "select valid tx ant: %u\n", valid_tx_ant);
+ return iwl_send_cmd_pdu(priv, TX_ANT_CONFIGURATION_CMD,
+ sizeof(struct iwl_tx_ant_config_cmd),
+ &tx_ant_cmd);
+ } else {
+ IWL_DEBUG_HC(priv, "TX_ANT_CONFIGURATION_CMD not supported\n");
+ return -EOPNOTSUPP;
+ }
+}
+
+
#define IWL5000_UCODE_GET(item) \
static u32 iwl5000_ucode_get_##item(const struct iwl_ucode_header *ucode,\
u32 api_ver) \
@@ -1492,6 +1510,7 @@
.rxon_assoc = iwl5000_send_rxon_assoc,
.commit_rxon = iwl_commit_rxon,
.set_rxon_chain = iwl_set_rxon_chain,
+ .set_tx_ant = iwl5000_send_tx_ant_config,
};
struct iwl_hcmd_utils_ops iwl5000_hcmd_utils = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index cf2b481..5505878 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1762,6 +1762,10 @@
priv->active_rate = priv->rates_mask;
priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
+ /* Configure Tx antenna selection based on H/W config */
+ if (priv->cfg->ops->hcmd->set_tx_ant)
+ priv->cfg->ops->hcmd->set_tx_ant(priv, priv->cfg->valid_tx_ant);
+
if (iwl_is_associated(priv)) {
struct iwl_rxon_cmd *active_rxon =
(struct iwl_rxon_cmd *)&priv->active_rxon;
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 2c5c88f..e5f40f3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -148,7 +148,7 @@
QUIET_NOTIFICATION = 0x96, /* not used */
REPLY_TX_PWR_TABLE_CMD = 0x97,
REPLY_TX_POWER_DBM_CMD_V1 = 0x98, /* old version of API */
- TX_ANT_CONFIGURATION_CMD = 0x98, /* not used */
+ TX_ANT_CONFIGURATION_CMD = 0x98,
MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */
/* Bluetooth device coexistence config command */
@@ -411,6 +411,16 @@
u8 reserved;
} __attribute__ ((packed));
+/**
+ * Command TX_ANT_CONFIGURATION_CMD = 0x98
+ * This command is used to configure valid Tx antenna.
+ * By default uCode concludes the valid antenna according to the radio flavor.
+ * This command enables the driver to override/modify this conclusion.
+ */
+struct iwl_tx_ant_config_cmd {
+ __le32 valid;
+} __attribute__ ((packed));
+
/******************************************************************************
* (0a)
* Alive and Error Commands & Responses:
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index c7675c3..f094cd9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -89,6 +89,7 @@
int (*rxon_assoc)(struct iwl_priv *priv);
int (*commit_rxon)(struct iwl_priv *priv);
void (*set_rxon_chain)(struct iwl_priv *priv);
+ int (*set_tx_ant)(struct iwl_priv *priv, u8 valid_tx_ant);
};
struct iwl_hcmd_utils_ops {