| /* |
| * Chip-specific setup code for the AT91SAM9G45 family |
| * |
| * Copyright (C) 2009 Atmel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/pm.h> |
| |
| #include <asm/irq.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <mach/at91sam9g45.h> |
| #include <mach/at91_pmc.h> |
| #include <mach/at91_rstc.h> |
| #include <mach/at91_shdwc.h> |
| #include <mach/cpu.h> |
| |
| #include "soc.h" |
| #include "generic.h" |
| #include "clock.h" |
| |
| /* -------------------------------------------------------------------- |
| * Clocks |
| * -------------------------------------------------------------------- */ |
| |
| /* |
| * The peripheral clocks. |
| */ |
| static struct clk pioA_clk = { |
| .name = "pioA_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_PIOA, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk pioB_clk = { |
| .name = "pioB_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_PIOB, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk pioC_clk = { |
| .name = "pioC_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_PIOC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk pioDE_clk = { |
| .name = "pioDE_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_PIODE, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart0_clk = { |
| .name = "usart0_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_US0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart1_clk = { |
| .name = "usart1_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_US1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart2_clk = { |
| .name = "usart2_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_US2, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk usart3_clk = { |
| .name = "usart3_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_US3, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk mmc0_clk = { |
| .name = "mci0_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_MCI0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk twi0_clk = { |
| .name = "twi0_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_TWI0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk twi1_clk = { |
| .name = "twi1_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_TWI1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk spi0_clk = { |
| .name = "spi0_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_SPI0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk spi1_clk = { |
| .name = "spi1_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_SPI1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk ssc0_clk = { |
| .name = "ssc0_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_SSC0, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk ssc1_clk = { |
| .name = "ssc1_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_SSC1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tcb0_clk = { |
| .name = "tcb0_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_TCB, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk pwm_clk = { |
| .name = "pwm_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_PWMC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk tsc_clk = { |
| .name = "tsc_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_TSC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk dma_clk = { |
| .name = "dma_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_DMA, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk uhphs_clk = { |
| .name = "uhphs_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_UHPHS, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk lcdc_clk = { |
| .name = "lcdc_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_LCDC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk ac97_clk = { |
| .name = "ac97_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_AC97C, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk macb_clk = { |
| .name = "macb_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_EMAC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk isi_clk = { |
| .name = "isi_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_ISI, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk udphs_clk = { |
| .name = "udphs_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_UDPHS, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| static struct clk mmc1_clk = { |
| .name = "mci1_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_MCI1, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| |
| /* Video decoder clock - Only for sam9m10/sam9m11 */ |
| static struct clk vdec_clk = { |
| .name = "vdec_clk", |
| .pmc_mask = 1 << AT91SAM9G45_ID_VDEC, |
| .type = CLK_TYPE_PERIPHERAL, |
| }; |
| |
| static struct clk *periph_clocks[] __initdata = { |
| &pioA_clk, |
| &pioB_clk, |
| &pioC_clk, |
| &pioDE_clk, |
| &usart0_clk, |
| &usart1_clk, |
| &usart2_clk, |
| &usart3_clk, |
| &mmc0_clk, |
| &twi0_clk, |
| &twi1_clk, |
| &spi0_clk, |
| &spi1_clk, |
| &ssc0_clk, |
| &ssc1_clk, |
| &tcb0_clk, |
| &pwm_clk, |
| &tsc_clk, |
| &dma_clk, |
| &uhphs_clk, |
| &lcdc_clk, |
| &ac97_clk, |
| &macb_clk, |
| &isi_clk, |
| &udphs_clk, |
| &mmc1_clk, |
| // irq0 |
| }; |
| |
| static struct clk_lookup periph_clocks_lookups[] = { |
| /* One additional fake clock for ohci */ |
| CLKDEV_CON_ID("ohci_clk", &uhphs_clk), |
| CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk), |
| CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), |
| CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), |
| CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk), |
| CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk), |
| CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), |
| CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), |
| CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk), |
| CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk), |
| CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), |
| CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), |
| }; |
| |
| static struct clk_lookup usart_clocks_lookups[] = { |
| CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), |
| CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), |
| CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), |
| CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), |
| CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), |
| }; |
| |
| /* |
| * The two programmable clocks. |
| * You must configure pin multiplexing to bring these signals out. |
| */ |
| static struct clk pck0 = { |
| .name = "pck0", |
| .pmc_mask = AT91_PMC_PCK0, |
| .type = CLK_TYPE_PROGRAMMABLE, |
| .id = 0, |
| }; |
| static struct clk pck1 = { |
| .name = "pck1", |
| .pmc_mask = AT91_PMC_PCK1, |
| .type = CLK_TYPE_PROGRAMMABLE, |
| .id = 1, |
| }; |
| |
| static void __init at91sam9g45_register_clocks(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) |
| clk_register(periph_clocks[i]); |
| |
| clkdev_add_table(periph_clocks_lookups, |
| ARRAY_SIZE(periph_clocks_lookups)); |
| clkdev_add_table(usart_clocks_lookups, |
| ARRAY_SIZE(usart_clocks_lookups)); |
| |
| if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11()) |
| clk_register(&vdec_clk); |
| |
| clk_register(&pck0); |
| clk_register(&pck1); |
| } |
| |
| static struct clk_lookup console_clock_lookup; |
| |
| void __init at91sam9g45_set_console_clock(int id) |
| { |
| if (id >= ARRAY_SIZE(usart_clocks_lookups)) |
| return; |
| |
| console_clock_lookup.con_id = "usart"; |
| console_clock_lookup.clk = usart_clocks_lookups[id].clk; |
| clkdev_add(&console_clock_lookup); |
| } |
| |
| /* -------------------------------------------------------------------- |
| * GPIO |
| * -------------------------------------------------------------------- */ |
| |
| static struct at91_gpio_bank at91sam9g45_gpio[] = { |
| { |
| .id = AT91SAM9G45_ID_PIOA, |
| .offset = AT91_PIOA, |
| .clock = &pioA_clk, |
| }, { |
| .id = AT91SAM9G45_ID_PIOB, |
| .offset = AT91_PIOB, |
| .clock = &pioB_clk, |
| }, { |
| .id = AT91SAM9G45_ID_PIOC, |
| .offset = AT91_PIOC, |
| .clock = &pioC_clk, |
| }, { |
| .id = AT91SAM9G45_ID_PIODE, |
| .offset = AT91_PIOD, |
| .clock = &pioDE_clk, |
| }, { |
| .id = AT91SAM9G45_ID_PIODE, |
| .offset = AT91_PIOE, |
| .clock = &pioDE_clk, |
| } |
| }; |
| |
| static void at91sam9g45_reset(void) |
| { |
| at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); |
| } |
| |
| static void at91sam9g45_poweroff(void) |
| { |
| at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); |
| } |
| |
| |
| /* -------------------------------------------------------------------- |
| * AT91SAM9G45 processor initialization |
| * -------------------------------------------------------------------- */ |
| |
| static void __init at91sam9g45_map_io(void) |
| { |
| at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE); |
| } |
| |
| static void __init at91sam9g45_initialize(void) |
| { |
| at91_arch_reset = at91sam9g45_reset; |
| pm_power_off = at91sam9g45_poweroff; |
| at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); |
| |
| /* Register GPIO subsystem */ |
| at91_gpio_init(at91sam9g45_gpio, 5); |
| } |
| |
| /* -------------------------------------------------------------------- |
| * Interrupt initialization |
| * -------------------------------------------------------------------- */ |
| |
| /* |
| * The default interrupt priority levels (0 = lowest, 7 = highest). |
| */ |
| static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { |
| 7, /* Advanced Interrupt Controller (FIQ) */ |
| 7, /* System Peripherals */ |
| 1, /* Parallel IO Controller A */ |
| 1, /* Parallel IO Controller B */ |
| 1, /* Parallel IO Controller C */ |
| 1, /* Parallel IO Controller D and E */ |
| 0, |
| 5, /* USART 0 */ |
| 5, /* USART 1 */ |
| 5, /* USART 2 */ |
| 5, /* USART 3 */ |
| 0, /* Multimedia Card Interface 0 */ |
| 6, /* Two-Wire Interface 0 */ |
| 6, /* Two-Wire Interface 1 */ |
| 5, /* Serial Peripheral Interface 0 */ |
| 5, /* Serial Peripheral Interface 1 */ |
| 4, /* Serial Synchronous Controller 0 */ |
| 4, /* Serial Synchronous Controller 1 */ |
| 0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */ |
| 0, /* Pulse Width Modulation Controller */ |
| 0, /* Touch Screen Controller */ |
| 0, /* DMA Controller */ |
| 2, /* USB Host High Speed port */ |
| 3, /* LDC Controller */ |
| 5, /* AC97 Controller */ |
| 3, /* Ethernet */ |
| 0, /* Image Sensor Interface */ |
| 2, /* USB Device High speed port */ |
| 0, |
| 0, /* Multimedia Card Interface 1 */ |
| 0, |
| 0, /* Advanced Interrupt Controller (IRQ0) */ |
| }; |
| |
| struct at91_init_soc __initdata at91sam9g45_soc = { |
| .map_io = at91sam9g45_map_io, |
| .default_irq_priority = at91sam9g45_default_irq_priority, |
| .register_clocks = at91sam9g45_register_clocks, |
| .init = at91sam9g45_initialize, |
| }; |