drivers/net/b44.c: Use (pr|netdev|netif)_<level> macro helpers
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Remove periods from formats
Coalesce long formats
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index f21cbe6..180510e 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -10,6 +10,8 @@
* Distribute under GPL.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -34,7 +36,6 @@
#include "b44.h"
#define DRV_MODULE_NAME "b44"
-#define PFX DRV_MODULE_NAME ": "
#define DRV_MODULE_VERSION "2.0"
#define B44_DEF_MSG_ENABLE \
@@ -190,12 +191,9 @@
}
if (i == timeout) {
if (net_ratelimit())
- printk(KERN_ERR PFX "%s: BUG! Timeout waiting for bit "
- "%08x of register "
- "%lx to %s.\n",
- bp->dev->name,
- bit, reg,
- (clear ? "clear" : "set"));
+ netdev_err(bp->dev, "BUG! Timeout waiting for bit %08x of register %lx to %s\n",
+ bit, reg, clear ? "clear" : "set");
+
return -ENODEV;
}
return 0;
@@ -335,8 +333,7 @@
err = b44_readphy(bp, MII_BMCR, &val);
if (!err) {
if (val & BMCR_RESET) {
- printk(KERN_ERR PFX "%s: PHY Reset would not complete.\n",
- bp->dev->name);
+ netdev_err(bp->dev, "PHY Reset would not complete\n");
err = -ENODEV;
}
}
@@ -415,7 +412,7 @@
}
return;
error:
- printk(KERN_WARNING PFX "PHY: cannot reset MII transceiver isolate bit.\n");
+ pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
}
#else
static inline void b44_wap54g10_workaround(struct b44 *bp)
@@ -508,18 +505,15 @@
static void b44_link_report(struct b44 *bp)
{
if (!netif_carrier_ok(bp->dev)) {
- printk(KERN_INFO PFX "%s: Link is down.\n", bp->dev->name);
+ netdev_info(bp->dev, "Link is down\n");
} else {
- printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex.\n",
- bp->dev->name,
- (bp->flags & B44_FLAG_100_BASE_T) ? 100 : 10,
- (bp->flags & B44_FLAG_FULL_DUPLEX) ? "full" : "half");
+ netdev_info(bp->dev, "Link is up at %d Mbps, %s duplex\n",
+ (bp->flags & B44_FLAG_100_BASE_T) ? 100 : 10,
+ (bp->flags & B44_FLAG_FULL_DUPLEX) ? "full" : "half");
- printk(KERN_INFO PFX "%s: Flow control is %s for TX and "
- "%s for RX.\n",
- bp->dev->name,
- (bp->flags & B44_FLAG_TX_PAUSE) ? "on" : "off",
- (bp->flags & B44_FLAG_RX_PAUSE) ? "on" : "off");
+ netdev_info(bp->dev, "Flow control is %s for TX and %s for RX\n",
+ (bp->flags & B44_FLAG_TX_PAUSE) ? "on" : "off",
+ (bp->flags & B44_FLAG_RX_PAUSE) ? "on" : "off");
}
}
@@ -578,11 +572,9 @@
}
if (bmsr & BMSR_RFAULT)
- printk(KERN_WARNING PFX "%s: Remote fault detected in PHY\n",
- bp->dev->name);
+ netdev_warn(bp->dev, "Remote fault detected in PHY\n");
if (bmsr & BMSR_JCD)
- printk(KERN_WARNING PFX "%s: Jabber detected in PHY\n",
- bp->dev->name);
+ netdev_warn(bp->dev, "Jabber detected in PHY\n");
}
}
@@ -903,7 +895,7 @@
handled = 1;
if (unlikely(!netif_running(dev))) {
- printk(KERN_INFO "%s: late interrupt.\n", dev->name);
+ netdev_info(dev, "late interrupt\n");
goto irq_ack;
}
@@ -928,8 +920,7 @@
{
struct b44 *bp = netdev_priv(dev);
- printk(KERN_ERR PFX "%s: transmit timed out, resetting\n",
- dev->name);
+ netdev_err(dev, "transmit timed out, resetting\n");
spin_lock_irq(&bp->lock);
@@ -958,8 +949,7 @@
/* This is a hard error, log it. */
if (unlikely(TX_BUFFS_AVAIL(bp) < 1)) {
netif_stop_queue(dev);
- printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
- dev->name);
+ netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
goto err_out;
}
@@ -1335,7 +1325,7 @@
/* reset PHY */
b44_phy_reset(bp);
/* power down PHY */
- printk(KERN_INFO PFX "%s: powering down PHY\n", bp->dev->name);
+ netdev_info(bp->dev, "powering down PHY\n");
bw32(bp, B44_MAC_CTRL, MAC_CTRL_PHY_PDOWN);
/* now reset the chip, but without enabling the MAC&PHY
* part of it. This has to be done _after_ we shut down the PHY */
@@ -1526,7 +1516,7 @@
pwol_pattern = kzalloc(B44_PATTERN_SIZE, GFP_KERNEL);
if (!pwol_pattern) {
- printk(KERN_ERR PFX "Memory not available for WOL\n");
+ pr_err("Memory not available for WOL\n");
return;
}
@@ -2099,7 +2089,7 @@
memcpy(bp->dev->dev_addr, addr, 6);
if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
- printk(KERN_ERR PFX "Invalid MAC address found in EEPROM\n");
+ pr_err("Invalid MAC address found in EEPROM\n");
return -EINVAL;
}
@@ -2144,12 +2134,12 @@
instance++;
if (b44_version_printed++ == 0)
- printk(KERN_INFO "%s", version);
+ pr_info("%s", version);
dev = alloc_etherdev(sizeof(*bp));
if (!dev) {
- dev_err(sdev->dev, "Etherdev alloc failed, aborting.\n");
+ dev_err(sdev->dev, "Etherdev alloc failed, aborting\n");
err = -ENOMEM;
goto out;
}
@@ -2188,13 +2178,13 @@
err = ssb_dma_set_mask(sdev, DMA_BIT_MASK(30));
if (err) {
dev_err(sdev->dev,
- "Required 30BIT DMA mask unsupported by the system.\n");
+ "Required 30BIT DMA mask unsupported by the system\n");
goto err_out_powerdown;
}
err = b44_get_invariants(bp);
if (err) {
dev_err(sdev->dev,
- "Problem fetching invariants of chip, aborting.\n");
+ "Problem fetching invariants of chip, aborting\n");
goto err_out_powerdown;
}
@@ -2214,7 +2204,7 @@
err = register_netdev(dev);
if (err) {
- dev_err(sdev->dev, "Cannot register net device, aborting.\n");
+ dev_err(sdev->dev, "Cannot register net device, aborting\n");
goto err_out_powerdown;
}
@@ -2225,8 +2215,8 @@
*/
b44_chip_reset(bp, B44_CHIP_RESET_FULL);
- printk(KERN_INFO "%s: Broadcom 44xx/47xx 10/100BaseT Ethernet %pM\n",
- dev->name, dev->dev_addr);
+ netdev_info(dev, "Broadcom 44xx/47xx 10/100BaseT Ethernet %pM\n",
+ dev->dev_addr);
return 0;
@@ -2299,7 +2289,7 @@
rc = request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, dev);
if (rc) {
- printk(KERN_ERR PFX "%s: request_irq failed\n", dev->name);
+ netdev_err(dev, "request_irq failed\n");
return rc;
}