| /* |
| * include/asm-i386/processor.h |
| * |
| * Copyright (C) 1994 Linus Torvalds |
| */ |
| |
| #ifndef __ASM_I386_PROCESSOR_H |
| #define __ASM_I386_PROCESSOR_H |
| |
| #include <asm/vm86.h> |
| #include <asm/math_emu.h> |
| #include <asm/segment.h> |
| #include <asm/page.h> |
| #include <asm/types.h> |
| #include <asm/sigcontext.h> |
| #include <asm/cpufeature.h> |
| #include <asm/msr.h> |
| #include <asm/system.h> |
| #include <linux/cache.h> |
| #include <linux/threads.h> |
| #include <asm/percpu.h> |
| #include <linux/cpumask.h> |
| #include <linux/init.h> |
| |
| /* flag for disabling the tsc */ |
| extern int tsc_disable; |
| |
| struct desc_struct { |
| unsigned long a,b; |
| }; |
| |
| #define desc_empty(desc) \ |
| (!((desc)->a | (desc)->b)) |
| |
| #define desc_equal(desc1, desc2) \ |
| (((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b)) |
| /* |
| * Default implementation of macro that returns current |
| * instruction pointer ("program counter"). |
| */ |
| #define current_text_addr() ({ void *pc; __asm__("movl $1f,%0\n1:":"=g" (pc)); pc; }) |
| |
| /* |
| * CPU type and hardware bug flags. Kept separately for each CPU. |
| * Members of this structure are referenced in head.S, so think twice |
| * before touching them. [mj] |
| */ |
| |
| struct cpuinfo_x86 { |
| __u8 x86; /* CPU family */ |
| __u8 x86_vendor; /* CPU vendor */ |
| __u8 x86_model; |
| __u8 x86_mask; |
| char wp_works_ok; /* It doesn't on 386's */ |
| char hlt_works_ok; /* Problems on some 486Dx4's and old 386's */ |
| char hard_math; |
| char rfu; |
| int cpuid_level; /* Maximum supported CPUID level, -1=no CPUID */ |
| unsigned long x86_capability[NCAPINTS]; |
| char x86_vendor_id[16]; |
| char x86_model_id[64]; |
| int x86_cache_size; /* in KB - valid for CPUS which support this |
| call */ |
| int x86_cache_alignment; /* In bytes */ |
| char fdiv_bug; |
| char f00f_bug; |
| char coma_bug; |
| char pad0; |
| int x86_power; |
| unsigned long loops_per_jiffy; |
| #ifdef CONFIG_SMP |
| cpumask_t llc_shared_map; /* cpus sharing the last level cache */ |
| #endif |
| unsigned char x86_max_cores; /* cpuid returned max cores value */ |
| unsigned char apicid; |
| unsigned short x86_clflush_size; |
| #ifdef CONFIG_SMP |
| unsigned char booted_cores; /* number of cores as seen by OS */ |
| __u8 phys_proc_id; /* Physical processor id. */ |
| __u8 cpu_core_id; /* Core id */ |
| #endif |
| } __attribute__((__aligned__(SMP_CACHE_BYTES))); |
| |
| #define X86_VENDOR_INTEL 0 |
| #define X86_VENDOR_CYRIX 1 |
| #define X86_VENDOR_AMD 2 |
| #define X86_VENDOR_UMC 3 |
| #define X86_VENDOR_NEXGEN 4 |
| #define X86_VENDOR_CENTAUR 5 |
| #define X86_VENDOR_RISE 6 |
| #define X86_VENDOR_TRANSMETA 7 |
| #define X86_VENDOR_NSC 8 |
| #define X86_VENDOR_NUM 9 |
| #define X86_VENDOR_UNKNOWN 0xff |
| |
| /* |
| * capabilities of CPUs |
| */ |
| |
| extern struct cpuinfo_x86 boot_cpu_data; |
| extern struct cpuinfo_x86 new_cpu_data; |
| extern struct tss_struct doublefault_tss; |
| DECLARE_PER_CPU(struct tss_struct, init_tss); |
| |
| #ifdef CONFIG_SMP |
| extern struct cpuinfo_x86 cpu_data[]; |
| #define current_cpu_data cpu_data[smp_processor_id()] |
| #else |
| #define cpu_data (&boot_cpu_data) |
| #define current_cpu_data boot_cpu_data |
| #endif |
| |
| extern int cpu_llc_id[NR_CPUS]; |
| extern char ignore_fpu_irq; |
| |
| void __init cpu_detect(struct cpuinfo_x86 *c); |
| |
| extern void identify_cpu(struct cpuinfo_x86 *); |
| extern void print_cpu_info(struct cpuinfo_x86 *); |
| extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c); |
| extern unsigned short num_cache_leaves; |
| |
| #ifdef CONFIG_X86_HT |
| extern void detect_ht(struct cpuinfo_x86 *c); |
| #else |
| static inline void detect_ht(struct cpuinfo_x86 *c) {} |
| #endif |
| |
| /* |
| * EFLAGS bits |
| */ |
| #define X86_EFLAGS_CF 0x00000001 /* Carry Flag */ |
| #define X86_EFLAGS_PF 0x00000004 /* Parity Flag */ |
| #define X86_EFLAGS_AF 0x00000010 /* Auxillary carry Flag */ |
| #define X86_EFLAGS_ZF 0x00000040 /* Zero Flag */ |
| #define X86_EFLAGS_SF 0x00000080 /* Sign Flag */ |
| #define X86_EFLAGS_TF 0x00000100 /* Trap Flag */ |
| #define X86_EFLAGS_IF 0x00000200 /* Interrupt Flag */ |
| #define X86_EFLAGS_DF 0x00000400 /* Direction Flag */ |
| #define X86_EFLAGS_OF 0x00000800 /* Overflow Flag */ |
| #define X86_EFLAGS_IOPL 0x00003000 /* IOPL mask */ |
| #define X86_EFLAGS_NT 0x00004000 /* Nested Task */ |
| #define X86_EFLAGS_RF 0x00010000 /* Resume Flag */ |
| #define X86_EFLAGS_VM 0x00020000 /* Virtual Mode */ |
| #define X86_EFLAGS_AC 0x00040000 /* Alignment Check */ |
| #define X86_EFLAGS_VIF 0x00080000 /* Virtual Interrupt Flag */ |
| #define X86_EFLAGS_VIP 0x00100000 /* Virtual Interrupt Pending */ |
| #define X86_EFLAGS_ID 0x00200000 /* CPUID detection flag */ |
| |
| static inline fastcall void native_cpuid(unsigned int *eax, unsigned int *ebx, |
| unsigned int *ecx, unsigned int *edx) |
| { |
| /* ecx is often an input as well as an output. */ |
| __asm__("cpuid" |
| : "=a" (*eax), |
| "=b" (*ebx), |
| "=c" (*ecx), |
| "=d" (*edx) |
| : "0" (*eax), "2" (*ecx)); |
| } |
| |
| #define load_cr3(pgdir) write_cr3(__pa(pgdir)) |
| |
| /* |
| * Intel CPU features in CR4 |
| */ |
| #define X86_CR4_VME 0x0001 /* enable vm86 extensions */ |
| #define X86_CR4_PVI 0x0002 /* virtual interrupts flag enable */ |
| #define X86_CR4_TSD 0x0004 /* disable time stamp at ipl 3 */ |
| #define X86_CR4_DE 0x0008 /* enable debugging extensions */ |
| #define X86_CR4_PSE 0x0010 /* enable page size extensions */ |
| #define X86_CR4_PAE 0x0020 /* enable physical address extensions */ |
| #define X86_CR4_MCE 0x0040 /* Machine check enable */ |
| #define X86_CR4_PGE 0x0080 /* enable global pages */ |
| #define X86_CR4_PCE 0x0100 /* enable performance counters at ipl 3 */ |
| #define X86_CR4_OSFXSR 0x0200 /* enable fast FPU save and restore */ |
| #define X86_CR4_OSXMMEXCPT 0x0400 /* enable unmasked SSE exceptions */ |
| |
| /* |
| * Save the cr4 feature set we're using (ie |
| * Pentium 4MB enable and PPro Global page |
| * enable), so that any CPU's that boot up |
| * after us can get the correct flags. |
| */ |
| extern unsigned long mmu_cr4_features; |
| |
| static inline void set_in_cr4 (unsigned long mask) |
| { |
| unsigned cr4; |
| mmu_cr4_features |= mask; |
| cr4 = read_cr4(); |
| cr4 |= mask; |
| write_cr4(cr4); |
| } |
| |
| static inline void clear_in_cr4 (unsigned long mask) |
| { |
| unsigned cr4; |
| mmu_cr4_features &= ~mask; |
| cr4 = read_cr4(); |
| cr4 &= ~mask; |
| write_cr4(cr4); |
| } |
| |
| /* |
| * NSC/Cyrix CPU configuration register indexes |
| */ |
| |
| #define CX86_PCR0 0x20 |
| #define CX86_GCR 0xb8 |
| #define CX86_CCR0 0xc0 |
| #define CX86_CCR1 0xc1 |
| #define CX86_CCR2 0xc2 |
| #define CX86_CCR3 0xc3 |
| #define CX86_CCR4 0xe8 |
| #define CX86_CCR5 0xe9 |
| #define CX86_CCR6 0xea |
| #define CX86_CCR7 0xeb |
| #define CX86_PCR1 0xf0 |
| #define CX86_DIR0 0xfe |
| #define CX86_DIR1 0xff |
| #define CX86_ARR_BASE 0xc4 |
| #define CX86_RCR_BASE 0xdc |
| |
| /* |
| * NSC/Cyrix CPU indexed register access macros |
| */ |
| |
| #define getCx86(reg) ({ outb((reg), 0x22); inb(0x23); }) |
| |
| #define setCx86(reg, data) do { \ |
| outb((reg), 0x22); \ |
| outb((data), 0x23); \ |
| } while (0) |
| |
| /* Stop speculative execution */ |
| static inline void sync_core(void) |
| { |
| int tmp; |
| asm volatile("cpuid" : "=a" (tmp) : "0" (1) : "ebx","ecx","edx","memory"); |
| } |
| |
| static inline void __monitor(const void *eax, unsigned long ecx, |
| unsigned long edx) |
| { |
| /* "monitor %eax,%ecx,%edx;" */ |
| asm volatile( |
| ".byte 0x0f,0x01,0xc8;" |
| : :"a" (eax), "c" (ecx), "d"(edx)); |
| } |
| |
| static inline void __mwait(unsigned long eax, unsigned long ecx) |
| { |
| /* "mwait %eax,%ecx;" */ |
| asm volatile( |
| ".byte 0x0f,0x01,0xc9;" |
| : :"a" (eax), "c" (ecx)); |
| } |
| |
| static inline void __sti_mwait(unsigned long eax, unsigned long ecx) |
| { |
| /* "mwait %eax,%ecx;" */ |
| asm volatile( |
| "sti; .byte 0x0f,0x01,0xc9;" |
| : :"a" (eax), "c" (ecx)); |
| } |
| |
| extern void mwait_idle_with_hints(unsigned long eax, unsigned long ecx); |
| |
| /* from system description table in BIOS. Mostly for MCA use, but |
| others may find it useful. */ |
| extern unsigned int machine_id; |
| extern unsigned int machine_submodel_id; |
| extern unsigned int BIOS_revision; |
| extern unsigned int mca_pentium_flag; |
| |
| /* Boot loader type from the setup header */ |
| extern int bootloader_type; |
| |
| /* |
| * User space process size: 3GB (default). |
| */ |
| #define TASK_SIZE (PAGE_OFFSET) |
| |
| /* This decides where the kernel will search for a free chunk of vm |
| * space during mmap's. |
| */ |
| #define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE / 3)) |
| |
| #define HAVE_ARCH_PICK_MMAP_LAYOUT |
| |
| /* |
| * Size of io_bitmap. |
| */ |
| #define IO_BITMAP_BITS 65536 |
| #define IO_BITMAP_BYTES (IO_BITMAP_BITS/8) |
| #define IO_BITMAP_LONGS (IO_BITMAP_BYTES/sizeof(long)) |
| #define IO_BITMAP_OFFSET offsetof(struct tss_struct,io_bitmap) |
| #define INVALID_IO_BITMAP_OFFSET 0x8000 |
| #define INVALID_IO_BITMAP_OFFSET_LAZY 0x9000 |
| |
| struct i387_fsave_struct { |
| long cwd; |
| long swd; |
| long twd; |
| long fip; |
| long fcs; |
| long foo; |
| long fos; |
| long st_space[20]; /* 8*10 bytes for each FP-reg = 80 bytes */ |
| long status; /* software status information */ |
| }; |
| |
| struct i387_fxsave_struct { |
| unsigned short cwd; |
| unsigned short swd; |
| unsigned short twd; |
| unsigned short fop; |
| long fip; |
| long fcs; |
| long foo; |
| long fos; |
| long mxcsr; |
| long mxcsr_mask; |
| long st_space[32]; /* 8*16 bytes for each FP-reg = 128 bytes */ |
| long xmm_space[32]; /* 8*16 bytes for each XMM-reg = 128 bytes */ |
| long padding[56]; |
| } __attribute__ ((aligned (16))); |
| |
| struct i387_soft_struct { |
| long cwd; |
| long swd; |
| long twd; |
| long fip; |
| long fcs; |
| long foo; |
| long fos; |
| long st_space[20]; /* 8*10 bytes for each FP-reg = 80 bytes */ |
| unsigned char ftop, changed, lookahead, no_update, rm, alimit; |
| struct info *info; |
| unsigned long entry_eip; |
| }; |
| |
| union i387_union { |
| struct i387_fsave_struct fsave; |
| struct i387_fxsave_struct fxsave; |
| struct i387_soft_struct soft; |
| }; |
| |
| typedef struct { |
| unsigned long seg; |
| } mm_segment_t; |
| |
| struct thread_struct; |
| |
| struct tss_struct { |
| unsigned short back_link,__blh; |
| unsigned long esp0; |
| unsigned short ss0,__ss0h; |
| unsigned long esp1; |
| unsigned short ss1,__ss1h; /* ss1 is used to cache MSR_IA32_SYSENTER_CS */ |
| unsigned long esp2; |
| unsigned short ss2,__ss2h; |
| unsigned long __cr3; |
| unsigned long eip; |
| unsigned long eflags; |
| unsigned long eax,ecx,edx,ebx; |
| unsigned long esp; |
| unsigned long ebp; |
| unsigned long esi; |
| unsigned long edi; |
| unsigned short es, __esh; |
| unsigned short cs, __csh; |
| unsigned short ss, __ssh; |
| unsigned short ds, __dsh; |
| unsigned short fs, __fsh; |
| unsigned short gs, __gsh; |
| unsigned short ldt, __ldth; |
| unsigned short trace, io_bitmap_base; |
| /* |
| * The extra 1 is there because the CPU will access an |
| * additional byte beyond the end of the IO permission |
| * bitmap. The extra byte must be all 1 bits, and must |
| * be within the limit. |
| */ |
| unsigned long io_bitmap[IO_BITMAP_LONGS + 1]; |
| /* |
| * Cache the current maximum and the last task that used the bitmap: |
| */ |
| unsigned long io_bitmap_max; |
| struct thread_struct *io_bitmap_owner; |
| /* |
| * pads the TSS to be cacheline-aligned (size is 0x100) |
| */ |
| unsigned long __cacheline_filler[35]; |
| /* |
| * .. and then another 0x100 bytes for emergency kernel stack |
| */ |
| unsigned long stack[64]; |
| } __attribute__((packed)); |
| |
| #define ARCH_MIN_TASKALIGN 16 |
| |
| struct thread_struct { |
| /* cached TLS descriptors. */ |
| struct desc_struct tls_array[GDT_ENTRY_TLS_ENTRIES]; |
| unsigned long esp0; |
| unsigned long sysenter_cs; |
| unsigned long eip; |
| unsigned long esp; |
| unsigned long fs; |
| unsigned long gs; |
| /* Hardware debugging registers */ |
| unsigned long debugreg[8]; /* %%db0-7 debug registers */ |
| /* fault info */ |
| unsigned long cr2, trap_no, error_code; |
| /* floating point info */ |
| union i387_union i387; |
| /* virtual 86 mode info */ |
| struct vm86_struct __user * vm86_info; |
| unsigned long screen_bitmap; |
| unsigned long v86flags, v86mask, saved_esp0; |
| unsigned int saved_fs, saved_gs; |
| /* IO permissions */ |
| unsigned long *io_bitmap_ptr; |
| unsigned long iopl; |
| /* max allowed port in the bitmap, in bytes: */ |
| unsigned long io_bitmap_max; |
| }; |
| |
| #define INIT_THREAD { \ |
| .vm86_info = NULL, \ |
| .sysenter_cs = __KERNEL_CS, \ |
| .io_bitmap_ptr = NULL, \ |
| .fs = __KERNEL_PDA, \ |
| } |
| |
| /* |
| * Note that the .io_bitmap member must be extra-big. This is because |
| * the CPU will access an additional byte beyond the end of the IO |
| * permission bitmap. The extra byte must be all 1 bits, and must |
| * be within the limit. |
| */ |
| #define INIT_TSS { \ |
| .esp0 = sizeof(init_stack) + (long)&init_stack, \ |
| .ss0 = __KERNEL_DS, \ |
| .ss1 = __KERNEL_CS, \ |
| .io_bitmap_base = INVALID_IO_BITMAP_OFFSET, \ |
| .io_bitmap = { [ 0 ... IO_BITMAP_LONGS] = ~0 }, \ |
| } |
| |
| #define start_thread(regs, new_eip, new_esp) do { \ |
| __asm__("movl %0,%%gs": :"r" (0)); \ |
| regs->xfs = 0; \ |
| set_fs(USER_DS); \ |
| regs->xds = __USER_DS; \ |
| regs->xes = __USER_DS; \ |
| regs->xss = __USER_DS; \ |
| regs->xcs = __USER_CS; \ |
| regs->eip = new_eip; \ |
| regs->esp = new_esp; \ |
| } while (0) |
| |
| /* Forward declaration, a strange C thing */ |
| struct task_struct; |
| struct mm_struct; |
| |
| /* Free all resources held by a thread. */ |
| extern void release_thread(struct task_struct *); |
| |
| /* Prepare to copy thread state - unlazy all lazy status */ |
| extern void prepare_to_copy(struct task_struct *tsk); |
| |
| /* |
| * create a kernel thread without removing it from tasklists |
| */ |
| extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); |
| |
| extern unsigned long thread_saved_pc(struct task_struct *tsk); |
| void show_trace(struct task_struct *task, struct pt_regs *regs, unsigned long *stack); |
| |
| unsigned long get_wchan(struct task_struct *p); |
| |
| #define THREAD_SIZE_LONGS (THREAD_SIZE/sizeof(unsigned long)) |
| #define KSTK_TOP(info) \ |
| ({ \ |
| unsigned long *__ptr = (unsigned long *)(info); \ |
| (unsigned long)(&__ptr[THREAD_SIZE_LONGS]); \ |
| }) |
| |
| /* |
| * The below -8 is to reserve 8 bytes on top of the ring0 stack. |
| * This is necessary to guarantee that the entire "struct pt_regs" |
| * is accessable even if the CPU haven't stored the SS/ESP registers |
| * on the stack (interrupt gate does not save these registers |
| * when switching to the same priv ring). |
| * Therefore beware: accessing the xss/esp fields of the |
| * "struct pt_regs" is possible, but they may contain the |
| * completely wrong values. |
| */ |
| #define task_pt_regs(task) \ |
| ({ \ |
| struct pt_regs *__regs__; \ |
| __regs__ = (struct pt_regs *)(KSTK_TOP(task_stack_page(task))-8); \ |
| __regs__ - 1; \ |
| }) |
| |
| #define KSTK_EIP(task) (task_pt_regs(task)->eip) |
| #define KSTK_ESP(task) (task_pt_regs(task)->esp) |
| |
| |
| struct microcode_header { |
| unsigned int hdrver; |
| unsigned int rev; |
| unsigned int date; |
| unsigned int sig; |
| unsigned int cksum; |
| unsigned int ldrver; |
| unsigned int pf; |
| unsigned int datasize; |
| unsigned int totalsize; |
| unsigned int reserved[3]; |
| }; |
| |
| struct microcode { |
| struct microcode_header hdr; |
| unsigned int bits[0]; |
| }; |
| |
| typedef struct microcode microcode_t; |
| typedef struct microcode_header microcode_header_t; |
| |
| /* microcode format is extended from prescott processors */ |
| struct extended_signature { |
| unsigned int sig; |
| unsigned int pf; |
| unsigned int cksum; |
| }; |
| |
| struct extended_sigtable { |
| unsigned int count; |
| unsigned int cksum; |
| unsigned int reserved[3]; |
| struct extended_signature sigs[0]; |
| }; |
| |
| /* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */ |
| static inline void rep_nop(void) |
| { |
| __asm__ __volatile__("rep;nop": : :"memory"); |
| } |
| |
| #define cpu_relax() rep_nop() |
| |
| #ifdef CONFIG_PARAVIRT |
| #include <asm/paravirt.h> |
| #else |
| #define paravirt_enabled() 0 |
| #define __cpuid native_cpuid |
| |
| static inline void load_esp0(struct tss_struct *tss, struct thread_struct *thread) |
| { |
| tss->esp0 = thread->esp0; |
| /* This can only happen when SEP is enabled, no need to test "SEP"arately */ |
| if (unlikely(tss->ss1 != thread->sysenter_cs)) { |
| tss->ss1 = thread->sysenter_cs; |
| wrmsr(MSR_IA32_SYSENTER_CS, thread->sysenter_cs, 0); |
| } |
| } |
| |
| /* |
| * These special macros can be used to get or set a debugging register |
| */ |
| #define get_debugreg(var, register) \ |
| __asm__("movl %%db" #register ", %0" \ |
| :"=r" (var)) |
| #define set_debugreg(value, register) \ |
| __asm__("movl %0,%%db" #register \ |
| : /* no output */ \ |
| :"r" (value)) |
| |
| #define set_iopl_mask native_set_iopl_mask |
| #endif /* CONFIG_PARAVIRT */ |
| |
| /* |
| * Set IOPL bits in EFLAGS from given mask |
| */ |
| static fastcall inline void native_set_iopl_mask(unsigned mask) |
| { |
| unsigned int reg; |
| __asm__ __volatile__ ("pushfl;" |
| "popl %0;" |
| "andl %1, %0;" |
| "orl %2, %0;" |
| "pushl %0;" |
| "popfl" |
| : "=&r" (reg) |
| : "i" (~X86_EFLAGS_IOPL), "r" (mask)); |
| } |
| |
| /* |
| * Generic CPUID function |
| * clear %ecx since some cpus (Cyrix MII) do not set or clear %ecx |
| * resulting in stale register contents being returned. |
| */ |
| static inline void cpuid(unsigned int op, unsigned int *eax, unsigned int *ebx, unsigned int *ecx, unsigned int *edx) |
| { |
| *eax = op; |
| *ecx = 0; |
| __cpuid(eax, ebx, ecx, edx); |
| } |
| |
| /* Some CPUID calls want 'count' to be placed in ecx */ |
| static inline void cpuid_count(int op, int count, int *eax, int *ebx, int *ecx, |
| int *edx) |
| { |
| *eax = op; |
| *ecx = count; |
| __cpuid(eax, ebx, ecx, edx); |
| } |
| |
| /* |
| * CPUID functions returning a single datum |
| */ |
| static inline unsigned int cpuid_eax(unsigned int op) |
| { |
| unsigned int eax, ebx, ecx, edx; |
| |
| cpuid(op, &eax, &ebx, &ecx, &edx); |
| return eax; |
| } |
| static inline unsigned int cpuid_ebx(unsigned int op) |
| { |
| unsigned int eax, ebx, ecx, edx; |
| |
| cpuid(op, &eax, &ebx, &ecx, &edx); |
| return ebx; |
| } |
| static inline unsigned int cpuid_ecx(unsigned int op) |
| { |
| unsigned int eax, ebx, ecx, edx; |
| |
| cpuid(op, &eax, &ebx, &ecx, &edx); |
| return ecx; |
| } |
| static inline unsigned int cpuid_edx(unsigned int op) |
| { |
| unsigned int eax, ebx, ecx, edx; |
| |
| cpuid(op, &eax, &ebx, &ecx, &edx); |
| return edx; |
| } |
| |
| /* generic versions from gas */ |
| #define GENERIC_NOP1 ".byte 0x90\n" |
| #define GENERIC_NOP2 ".byte 0x89,0xf6\n" |
| #define GENERIC_NOP3 ".byte 0x8d,0x76,0x00\n" |
| #define GENERIC_NOP4 ".byte 0x8d,0x74,0x26,0x00\n" |
| #define GENERIC_NOP5 GENERIC_NOP1 GENERIC_NOP4 |
| #define GENERIC_NOP6 ".byte 0x8d,0xb6,0x00,0x00,0x00,0x00\n" |
| #define GENERIC_NOP7 ".byte 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00\n" |
| #define GENERIC_NOP8 GENERIC_NOP1 GENERIC_NOP7 |
| |
| /* Opteron nops */ |
| #define K8_NOP1 GENERIC_NOP1 |
| #define K8_NOP2 ".byte 0x66,0x90\n" |
| #define K8_NOP3 ".byte 0x66,0x66,0x90\n" |
| #define K8_NOP4 ".byte 0x66,0x66,0x66,0x90\n" |
| #define K8_NOP5 K8_NOP3 K8_NOP2 |
| #define K8_NOP6 K8_NOP3 K8_NOP3 |
| #define K8_NOP7 K8_NOP4 K8_NOP3 |
| #define K8_NOP8 K8_NOP4 K8_NOP4 |
| |
| /* K7 nops */ |
| /* uses eax dependencies (arbitary choice) */ |
| #define K7_NOP1 GENERIC_NOP1 |
| #define K7_NOP2 ".byte 0x8b,0xc0\n" |
| #define K7_NOP3 ".byte 0x8d,0x04,0x20\n" |
| #define K7_NOP4 ".byte 0x8d,0x44,0x20,0x00\n" |
| #define K7_NOP5 K7_NOP4 ASM_NOP1 |
| #define K7_NOP6 ".byte 0x8d,0x80,0,0,0,0\n" |
| #define K7_NOP7 ".byte 0x8D,0x04,0x05,0,0,0,0\n" |
| #define K7_NOP8 K7_NOP7 ASM_NOP1 |
| |
| #ifdef CONFIG_MK8 |
| #define ASM_NOP1 K8_NOP1 |
| #define ASM_NOP2 K8_NOP2 |
| #define ASM_NOP3 K8_NOP3 |
| #define ASM_NOP4 K8_NOP4 |
| #define ASM_NOP5 K8_NOP5 |
| #define ASM_NOP6 K8_NOP6 |
| #define ASM_NOP7 K8_NOP7 |
| #define ASM_NOP8 K8_NOP8 |
| #elif defined(CONFIG_MK7) |
| #define ASM_NOP1 K7_NOP1 |
| #define ASM_NOP2 K7_NOP2 |
| #define ASM_NOP3 K7_NOP3 |
| #define ASM_NOP4 K7_NOP4 |
| #define ASM_NOP5 K7_NOP5 |
| #define ASM_NOP6 K7_NOP6 |
| #define ASM_NOP7 K7_NOP7 |
| #define ASM_NOP8 K7_NOP8 |
| #else |
| #define ASM_NOP1 GENERIC_NOP1 |
| #define ASM_NOP2 GENERIC_NOP2 |
| #define ASM_NOP3 GENERIC_NOP3 |
| #define ASM_NOP4 GENERIC_NOP4 |
| #define ASM_NOP5 GENERIC_NOP5 |
| #define ASM_NOP6 GENERIC_NOP6 |
| #define ASM_NOP7 GENERIC_NOP7 |
| #define ASM_NOP8 GENERIC_NOP8 |
| #endif |
| |
| #define ASM_NOP_MAX 8 |
| |
| /* Prefetch instructions for Pentium III and AMD Athlon */ |
| /* It's not worth to care about 3dnow! prefetches for the K6 |
| because they are microcoded there and very slow. |
| However we don't do prefetches for pre XP Athlons currently |
| That should be fixed. */ |
| #define ARCH_HAS_PREFETCH |
| static inline void prefetch(const void *x) |
| { |
| alternative_input(ASM_NOP4, |
| "prefetchnta (%1)", |
| X86_FEATURE_XMM, |
| "r" (x)); |
| } |
| |
| #define ARCH_HAS_PREFETCH |
| #define ARCH_HAS_PREFETCHW |
| #define ARCH_HAS_SPINLOCK_PREFETCH |
| |
| /* 3dnow! prefetch to get an exclusive cache line. Useful for |
| spinlocks to avoid one state transition in the cache coherency protocol. */ |
| static inline void prefetchw(const void *x) |
| { |
| alternative_input(ASM_NOP4, |
| "prefetchw (%1)", |
| X86_FEATURE_3DNOW, |
| "r" (x)); |
| } |
| #define spin_lock_prefetch(x) prefetchw(x) |
| |
| extern void select_idle_routine(const struct cpuinfo_x86 *c); |
| |
| #define cache_line_size() (boot_cpu_data.x86_cache_alignment) |
| |
| extern unsigned long boot_option_idle_override; |
| extern void enable_sep_cpu(void); |
| extern int sysenter_setup(void); |
| |
| extern int init_gdt(int cpu, struct task_struct *idle); |
| extern void cpu_set_gdt(int); |
| extern void secondary_cpu_init(void); |
| |
| #endif /* __ASM_I386_PROCESSOR_H */ |