diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 382f393..f8a58e7a 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -153,6 +153,19 @@
 	   Coda is a range of video codec IPs that supports
 	   H.264, MPEG-4, and other video formats.
 
+config VIDEO_MEDIATEK_VPU
+	tristate "Mediatek Video Processor Unit"
+	depends on VIDEO_DEV && VIDEO_V4L2
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	---help---
+	    This driver provides downloading VPU firmware and
+	    communicating with VPU. This driver for hw video
+	    codec embedded in Mediatek's MT8173 SOCs. It is able
+	    to handle video decoding/encoding in a range of formats.
+
+	    To compile this driver as a module, choose M here: the
+	    module will be called mtk-vpu.
+
 config VIDEO_MEM2MEM_DEINTERLACE
 	tristate "Deinterlace support"
 	depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE
diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index 99cf315..995a4ec 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -58,3 +58,5 @@
 obj-$(CONFIG_VIDEO_RCAR_VIN)		+= rcar-vin/
 
 ccflags-y += -I$(srctree)/drivers/media/i2c
+
+obj-$(CONFIG_VIDEO_MEDIATEK_VPU)	+= mtk-vpu/
diff --git a/drivers/media/platform/mtk-vpu/Makefile b/drivers/media/platform/mtk-vpu/Makefile
new file mode 100644
index 0000000..58cc1b4
--- /dev/null
+++ b/drivers/media/platform/mtk-vpu/Makefile
@@ -0,0 +1,3 @@
+mtk-vpu-y += mtk_vpu.o
+
+obj-$(CONFIG_VIDEO_MEDIATEK_VPU) += mtk-vpu.o
diff --git a/drivers/media/platform/mtk-vpu/mtk_vpu.c b/drivers/media/platform/mtk-vpu/mtk_vpu.c
new file mode 100644
index 0000000..b60d02c
--- /dev/null
+++ b/drivers/media/platform/mtk-vpu/mtk_vpu.c
@@ -0,0 +1,950 @@
+/*
+* Copyright (c) 2016 MediaTek Inc.
+* Author: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*/
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/firmware.h>
+#include <linux/interrupt.h>
+#include <linux/iommu.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/sched.h>
+#include <linux/sizes.h>
+
+#include "mtk_vpu.h"
+
+/**
+ * VPU (video processor unit) is a tiny processor controlling video hardware
+ * related to video codec, scaling and color format converting.
+ * VPU interfaces with other blocks by share memory and interrupt.
+ **/
+
+#define INIT_TIMEOUT_MS		2000U
+#define IPI_TIMEOUT_MS		2000U
+#define VPU_FW_VER_LEN		16
+
+/* maximum program/data TCM (Tightly-Coupled Memory) size */
+#define VPU_PTCM_SIZE		(96 * SZ_1K)
+#define VPU_DTCM_SIZE		(32 * SZ_1K)
+/* the offset to get data tcm address */
+#define VPU_DTCM_OFFSET		0x18000UL
+/* daynamic allocated maximum extended memory size */
+#define VPU_EXT_P_SIZE		SZ_1M
+#define VPU_EXT_D_SIZE		SZ_4M
+/* maximum binary firmware size */
+#define VPU_P_FW_SIZE		(VPU_PTCM_SIZE + VPU_EXT_P_SIZE)
+#define VPU_D_FW_SIZE		(VPU_DTCM_SIZE + VPU_EXT_D_SIZE)
+/* the size of share buffer between Host and  VPU */
+#define SHARE_BUF_SIZE		48
+
+/* binary firmware name */
+#define VPU_P_FW		"vpu_p.bin"
+#define VPU_D_FW		"vpu_d.bin"
+
+#define VPU_RESET		0x0
+#define VPU_TCM_CFG		0x0008
+#define VPU_PMEM_EXT0_ADDR	0x000C
+#define VPU_PMEM_EXT1_ADDR	0x0010
+#define VPU_TO_HOST		0x001C
+#define VPU_DMEM_EXT0_ADDR	0x0014
+#define VPU_DMEM_EXT1_ADDR	0x0018
+#define HOST_TO_VPU		0x0024
+#define VPU_PC_REG		0x0060
+#define VPU_WDT_REG		0x0084
+
+/* vpu inter-processor communication interrupt */
+#define VPU_IPC_INT		BIT(8)
+
+/**
+ * enum vpu_fw_type - VPU firmware type
+ *
+ * @P_FW: program firmware
+ * @D_FW: data firmware
+ *
+ */
+enum vpu_fw_type {
+	P_FW,
+	D_FW,
+};
+
+/**
+ * struct vpu_mem - VPU extended program/data memory information
+ *
+ * @va:		the kernel virtual memory address of VPU extended memory
+ * @pa:		the physical memory address of VPU extended memory
+ *
+ */
+struct vpu_mem {
+	void *va;
+	dma_addr_t pa;
+};
+
+/**
+ * struct vpu_regs - VPU TCM and configuration registers
+ *
+ * @tcm:	the register for VPU Tightly-Coupled Memory
+ * @cfg:	the register for VPU configuration
+ * @irq:	the irq number for VPU interrupt
+ */
+struct vpu_regs {
+	void __iomem *tcm;
+	void __iomem *cfg;
+	int irq;
+};
+
+/**
+ * struct vpu_wdt_handler - VPU watchdog reset handler
+ *
+ * @reset_func:	reset handler
+ * @priv:	private data
+ */
+struct vpu_wdt_handler {
+	void (*reset_func)(void *);
+	void *priv;
+};
+
+/**
+ * struct vpu_wdt - VPU watchdog workqueue
+ *
+ * @handler:	VPU watchdog reset handler
+ * @ws:		workstruct for VPU watchdog
+ * @wq:		workqueue for VPU watchdog
+ */
+struct vpu_wdt {
+	struct vpu_wdt_handler handler[VPU_RST_MAX];
+	struct work_struct ws;
+	struct workqueue_struct *wq;
+};
+
+/**
+ * struct vpu_run - VPU initialization status
+ *
+ * @signaled:		the signal of vpu initialization completed
+ * @fw_ver:		VPU firmware version
+ * @enc_capability:	encoder capability which is not used for now and
+ *			the value is reserved for future use
+ * @wq:			wait queue for VPU initialization status
+ */
+struct vpu_run {
+	u32 signaled;
+	char fw_ver[VPU_FW_VER_LEN];
+	unsigned int	enc_capability;
+	wait_queue_head_t wq;
+};
+
+/**
+ * struct vpu_ipi_desc - VPU IPI descriptor
+ *
+ * @handler:	IPI handler
+ * @name:	the name of IPI handler
+ * @priv:	the private data of IPI handler
+ */
+struct vpu_ipi_desc {
+	ipi_handler_t handler;
+	const char *name;
+	void *priv;
+};
+
+/**
+ * struct share_obj - DTCM (Data Tightly-Coupled Memory) buffer shared with
+ *		      AP and VPU
+ *
+ * @id:		IPI id
+ * @len:	share buffer length
+ * @share_buf:	share buffer data
+ */
+struct share_obj {
+	s32 id;
+	u32 len;
+	unsigned char share_buf[SHARE_BUF_SIZE];
+};
+
+/**
+ * struct mtk_vpu - vpu driver data
+ * @extmem:		VPU extended memory information
+ * @reg:		VPU TCM and configuration registers
+ * @run:		VPU initialization status
+ * @ipi_desc:		VPU IPI descriptor
+ * @recv_buf:		VPU DTCM share buffer for receiving. The
+ *			receive buffer is only accessed in interrupt context.
+ * @send_buf:		VPU DTCM share buffer for sending
+ * @dev:		VPU struct device
+ * @clk:		VPU clock on/off
+ * @fw_loaded:		indicate VPU firmware loaded
+ * @enable_4GB:		VPU 4GB mode on/off
+ * @vpu_mutex:		protect mtk_vpu (except recv_buf) and ensure only
+ *			one client to use VPU service at a time. For example,
+ *			suppose a client is using VPU to decode VP8.
+ *			If the other client wants to encode VP8,
+ *			it has to wait until VP8 decode completes.
+ * @wdt_refcnt		WDT reference count to make sure the watchdog can be
+ *			disabled if no other client is using VPU service
+ * @ack_wq:		The wait queue for each codec and mdp. When sleeping
+ *			processes wake up, they will check the condition
+ *			"ipi_id_ack" to run the corresponding action or
+ *			go back to sleep.
+ * @ipi_id_ack:		The ACKs for registered IPI function sending
+ *			interrupt to VPU
+ *
+ */
+struct mtk_vpu {
+	struct vpu_mem extmem[2];
+	struct vpu_regs reg;
+	struct vpu_run run;
+	struct vpu_wdt wdt;
+	struct vpu_ipi_desc ipi_desc[IPI_MAX];
+	struct share_obj *recv_buf;
+	struct share_obj *send_buf;
+	struct device *dev;
+	struct clk *clk;
+	bool fw_loaded;
+	bool enable_4GB;
+	struct mutex vpu_mutex; /* for protecting vpu data data structure */
+	u32 wdt_refcnt;
+	wait_queue_head_t ack_wq;
+	bool ipi_id_ack[IPI_MAX];
+};
+
+static inline void vpu_cfg_writel(struct mtk_vpu *vpu, u32 val, u32 offset)
+{
+	writel(val, vpu->reg.cfg + offset);
+}
+
+static inline u32 vpu_cfg_readl(struct mtk_vpu *vpu, u32 offset)
+{
+	return readl(vpu->reg.cfg + offset);
+}
+
+static inline bool vpu_running(struct mtk_vpu *vpu)
+{
+	return vpu_cfg_readl(vpu, VPU_RESET) & BIT(0);
+}
+
+static void vpu_clock_disable(struct mtk_vpu *vpu)
+{
+	/* Disable VPU watchdog */
+	mutex_lock(&vpu->vpu_mutex);
+	if (!--vpu->wdt_refcnt)
+		vpu_cfg_writel(vpu,
+			       vpu_cfg_readl(vpu, VPU_WDT_REG) & ~(1L << 31),
+			       VPU_WDT_REG);
+	mutex_unlock(&vpu->vpu_mutex);
+
+	clk_disable(vpu->clk);
+}
+
+static int vpu_clock_enable(struct mtk_vpu *vpu)
+{
+	int ret;
+
+	ret = clk_enable(vpu->clk);
+	if (ret)
+		return ret;
+	/* Enable VPU watchdog */
+	mutex_lock(&vpu->vpu_mutex);
+	if (!vpu->wdt_refcnt++)
+		vpu_cfg_writel(vpu,
+			       vpu_cfg_readl(vpu, VPU_WDT_REG) | (1L << 31),
+			       VPU_WDT_REG);
+	mutex_unlock(&vpu->vpu_mutex);
+
+	return ret;
+}
+
+int vpu_ipi_register(struct platform_device *pdev,
+		     enum ipi_id id, ipi_handler_t handler,
+		     const char *name, void *priv)
+{
+	struct mtk_vpu *vpu = platform_get_drvdata(pdev);
+	struct vpu_ipi_desc *ipi_desc;
+
+	if (!vpu) {
+		dev_err(&pdev->dev, "vpu device in not ready\n");
+		return -EPROBE_DEFER;
+	}
+
+	if (id >= 0 && id < IPI_MAX && handler) {
+		ipi_desc = vpu->ipi_desc;
+		ipi_desc[id].name = name;
+		ipi_desc[id].handler = handler;
+		ipi_desc[id].priv = priv;
+		return 0;
+	}
+
+	dev_err(&pdev->dev, "register vpu ipi id %d with invalid arguments\n",
+		id);
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(vpu_ipi_register);
+
+int vpu_ipi_send(struct platform_device *pdev,
+		 enum ipi_id id, void *buf,
+		 unsigned int len)
+{
+	struct mtk_vpu *vpu = platform_get_drvdata(pdev);
+	struct share_obj *send_obj = vpu->send_buf;
+	unsigned long timeout;
+	int ret = 0;
+
+	if (id <= IPI_VPU_INIT || id >= IPI_MAX ||
+	    len > sizeof(send_obj->share_buf) || !buf) {
+		dev_err(vpu->dev, "failed to send ipi message\n");
+		return -EINVAL;
+	}
+
+	ret = vpu_clock_enable(vpu);
+	if (ret) {
+		dev_err(vpu->dev, "failed to enable vpu clock\n");
+		return ret;
+	}
+	if (!vpu_running(vpu)) {
+		dev_err(vpu->dev, "vpu_ipi_send: VPU is not running\n");
+		ret = -EINVAL;
+		goto clock_disable;
+	}
+
+	mutex_lock(&vpu->vpu_mutex);
+
+	 /* Wait until VPU receives the last command */
+	timeout = jiffies + msecs_to_jiffies(IPI_TIMEOUT_MS);
+	do {
+		if (time_after(jiffies, timeout)) {
+			dev_err(vpu->dev, "vpu_ipi_send: IPI timeout!\n");
+			ret = -EIO;
+			goto mut_unlock;
+		}
+	} while (vpu_cfg_readl(vpu, HOST_TO_VPU));
+
+	memcpy((void *)send_obj->share_buf, buf, len);
+	send_obj->len = len;
+	send_obj->id = id;
+
+	vpu->ipi_id_ack[id] = false;
+	/* send the command to VPU */
+	vpu_cfg_writel(vpu, 0x1, HOST_TO_VPU);
+
+	mutex_unlock(&vpu->vpu_mutex);
+
+	/* wait for VPU's ACK */
+	timeout = msecs_to_jiffies(IPI_TIMEOUT_MS);
+	ret = wait_event_timeout(vpu->ack_wq, vpu->ipi_id_ack[id], timeout);
+	vpu->ipi_id_ack[id] = false;
+	if (ret == 0) {
+		dev_err(vpu->dev, "vpu ipi %d ack time out !", id);
+		ret = -EIO;
+		goto clock_disable;
+	}
+	vpu_clock_disable(vpu);
+
+	return 0;
+
+mut_unlock:
+	mutex_unlock(&vpu->vpu_mutex);
+clock_disable:
+	vpu_clock_disable(vpu);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(vpu_ipi_send);
+
+static void vpu_wdt_reset_func(struct work_struct *ws)
+{
+	struct vpu_wdt *wdt = container_of(ws, struct vpu_wdt, ws);
+	struct mtk_vpu *vpu = container_of(wdt, struct mtk_vpu, wdt);
+	struct vpu_wdt_handler *handler = wdt->handler;
+	int index, ret;
+
+	dev_info(vpu->dev, "vpu reset\n");
+	ret = vpu_clock_enable(vpu);
+	if (ret) {
+		dev_err(vpu->dev, "[VPU] wdt enables clock failed %d\n", ret);
+		return;
+	}
+	mutex_lock(&vpu->vpu_mutex);
+	vpu_cfg_writel(vpu, 0x0, VPU_RESET);
+	vpu->fw_loaded = false;
+	mutex_unlock(&vpu->vpu_mutex);
+	vpu_clock_disable(vpu);
+
+	for (index = 0; index < VPU_RST_MAX; index++) {
+		if (handler[index].reset_func) {
+			handler[index].reset_func(handler[index].priv);
+			dev_dbg(vpu->dev, "wdt handler func %d\n", index);
+		}
+	}
+}
+
+int vpu_wdt_reg_handler(struct platform_device *pdev,
+			void wdt_reset(void *),
+			void *priv, enum rst_id id)
+{
+	struct mtk_vpu *vpu = platform_get_drvdata(pdev);
+	struct vpu_wdt_handler *handler;
+
+	if (!vpu) {
+		dev_err(&pdev->dev, "vpu device in not ready\n");
+		return -EPROBE_DEFER;
+	}
+
+	handler = vpu->wdt.handler;
+
+	if (id >= 0 && id < VPU_RST_MAX && wdt_reset) {
+		dev_dbg(vpu->dev, "wdt register id %d\n", id);
+		mutex_lock(&vpu->vpu_mutex);
+		handler[id].reset_func = wdt_reset;
+		handler[id].priv = priv;
+		mutex_unlock(&vpu->vpu_mutex);
+		return 0;
+	}
+
+	dev_err(vpu->dev, "register vpu wdt handler failed\n");
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(vpu_wdt_reg_handler);
+
+unsigned int vpu_get_venc_hw_capa(struct platform_device *pdev)
+{
+	struct mtk_vpu *vpu = platform_get_drvdata(pdev);
+
+	return vpu->run.enc_capability;
+}
+EXPORT_SYMBOL_GPL(vpu_get_venc_hw_capa);
+
+void *vpu_mapping_dm_addr(struct platform_device *pdev,
+			  u32 dtcm_dmem_addr)
+{
+	struct mtk_vpu *vpu = platform_get_drvdata(pdev);
+
+	if (!dtcm_dmem_addr ||
+	    (dtcm_dmem_addr > (VPU_DTCM_SIZE + VPU_EXT_D_SIZE))) {
+		dev_err(vpu->dev, "invalid virtual data memory address\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (dtcm_dmem_addr < VPU_DTCM_SIZE)
+		return (__force void *)(dtcm_dmem_addr + vpu->reg.tcm +
+					VPU_DTCM_OFFSET);
+
+	return vpu->extmem[D_FW].va + (dtcm_dmem_addr - VPU_DTCM_SIZE);
+}
+EXPORT_SYMBOL_GPL(vpu_mapping_dm_addr);
+
+struct platform_device *vpu_get_plat_device(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *vpu_node;
+	struct platform_device *vpu_pdev;
+
+	vpu_node = of_parse_phandle(dev->of_node, "mediatek,vpu", 0);
+	if (!vpu_node) {
+		dev_err(dev, "can't get vpu node\n");
+		return NULL;
+	}
+
+	vpu_pdev = of_find_device_by_node(vpu_node);
+	if (WARN_ON(!vpu_pdev)) {
+		dev_err(dev, "vpu pdev failed\n");
+		of_node_put(vpu_node);
+		return NULL;
+	}
+
+	return vpu_pdev;
+}
+EXPORT_SYMBOL_GPL(vpu_get_plat_device);
+
+/* load vpu program/data memory */
+static int load_requested_vpu(struct mtk_vpu *vpu,
+			      const struct firmware *vpu_fw,
+			      u8 fw_type)
+{
+	size_t tcm_size = fw_type ? VPU_DTCM_SIZE : VPU_PTCM_SIZE;
+	size_t fw_size = fw_type ? VPU_D_FW_SIZE : VPU_P_FW_SIZE;
+	char *fw_name = fw_type ? VPU_D_FW : VPU_P_FW;
+	size_t dl_size = 0;
+	size_t extra_fw_size = 0;
+	void *dest;
+	int ret;
+
+	ret = request_firmware(&vpu_fw, fw_name, vpu->dev);
+	if (ret < 0) {
+		dev_err(vpu->dev, "Failed to load %s, %d\n", fw_name, ret);
+		return ret;
+	}
+	dl_size = vpu_fw->size;
+	if (dl_size > fw_size) {
+		dev_err(vpu->dev, "fw %s size %zu is abnormal\n", fw_name,
+			dl_size);
+		release_firmware(vpu_fw);
+		return  -EFBIG;
+	}
+	dev_dbg(vpu->dev, "Downloaded fw %s size: %zu.\n",
+		fw_name,
+		dl_size);
+	/* reset VPU */
+	vpu_cfg_writel(vpu, 0x0, VPU_RESET);
+
+	/* handle extended firmware size */
+	if (dl_size > tcm_size) {
+		dev_dbg(vpu->dev, "fw size %zu > limited fw size %zu\n",
+			dl_size, tcm_size);
+		extra_fw_size = dl_size - tcm_size;
+		dev_dbg(vpu->dev, "extra_fw_size %zu\n", extra_fw_size);
+		dl_size = tcm_size;
+	}
+	dest = (__force void *)vpu->reg.tcm;
+	if (fw_type == D_FW)
+		dest += VPU_DTCM_OFFSET;
+	memcpy(dest, vpu_fw->data, dl_size);
+	/* download to extended memory if need */
+	if (extra_fw_size > 0) {
+		dest = vpu->extmem[fw_type].va;
+		dev_dbg(vpu->dev, "download extended memory type %x\n",
+			fw_type);
+		memcpy(dest, vpu_fw->data + tcm_size, extra_fw_size);
+	}
+
+	release_firmware(vpu_fw);
+
+	return 0;
+}
+
+int vpu_load_firmware(struct platform_device *pdev)
+{
+	struct mtk_vpu *vpu = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+	struct vpu_run *run = &vpu->run;
+	const struct firmware *vpu_fw = NULL;
+	int ret;
+
+	if (!pdev) {
+		dev_err(dev, "VPU platform device is invalid\n");
+		return -EINVAL;
+	}
+
+	mutex_lock(&vpu->vpu_mutex);
+	if (vpu->fw_loaded) {
+		mutex_unlock(&vpu->vpu_mutex);
+		return 0;
+	}
+	mutex_unlock(&vpu->vpu_mutex);
+
+	ret = vpu_clock_enable(vpu);
+	if (ret) {
+		dev_err(dev, "enable clock failed %d\n", ret);
+		return ret;
+	}
+
+	mutex_lock(&vpu->vpu_mutex);
+
+	run->signaled = false;
+	dev_dbg(vpu->dev, "firmware request\n");
+	/* Downloading program firmware to device*/
+	ret = load_requested_vpu(vpu, vpu_fw, P_FW);
+	if (ret < 0) {
+		dev_err(dev, "Failed to request %s, %d\n", VPU_P_FW, ret);
+		goto OUT_LOAD_FW;
+	}
+
+	/* Downloading data firmware to device */
+	ret = load_requested_vpu(vpu, vpu_fw, D_FW);
+	if (ret < 0) {
+		dev_err(dev, "Failed to request %s, %d\n", VPU_D_FW, ret);
+		goto OUT_LOAD_FW;
+	}
+
+	vpu->fw_loaded = true;
+	/* boot up vpu */
+	vpu_cfg_writel(vpu, 0x1, VPU_RESET);
+
+	ret = wait_event_interruptible_timeout(run->wq,
+					       run->signaled,
+					       msecs_to_jiffies(INIT_TIMEOUT_MS)
+					       );
+	if (ret == 0) {
+		ret = -ETIME;
+		dev_err(dev, "wait vpu initialization timout!\n");
+		goto OUT_LOAD_FW;
+	} else if (-ERESTARTSYS == ret) {
+		dev_err(dev, "wait vpu interrupted by a signal!\n");
+		goto OUT_LOAD_FW;
+	}
+
+	ret = 0;
+	dev_info(dev, "vpu is ready. Fw version %s\n", run->fw_ver);
+
+OUT_LOAD_FW:
+	mutex_unlock(&vpu->vpu_mutex);
+	vpu_clock_disable(vpu);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(vpu_load_firmware);
+
+static void vpu_init_ipi_handler(void *data, unsigned int len, void *priv)
+{
+	struct mtk_vpu *vpu = (struct mtk_vpu *)priv;
+	struct vpu_run *run = (struct vpu_run *)data;
+
+	vpu->run.signaled = run->signaled;
+	strncpy(vpu->run.fw_ver, run->fw_ver, VPU_FW_VER_LEN);
+	vpu->run.enc_capability = run->enc_capability;
+	wake_up_interruptible(&vpu->run.wq);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static ssize_t vpu_debug_read(struct file *file, char __user *user_buf,
+			      size_t count, loff_t *ppos)
+{
+	char buf[256];
+	unsigned int len;
+	unsigned int running, pc, vpu_to_host, host_to_vpu, wdt;
+	int ret;
+	struct device *dev = file->private_data;
+	struct mtk_vpu *vpu = dev_get_drvdata(dev);
+
+	ret = vpu_clock_enable(vpu);
+	if (ret) {
+		dev_err(vpu->dev, "[VPU] enable clock failed %d\n", ret);
+		return 0;
+	}
+
+	/* vpu register status */
+	running = vpu_running(vpu);
+	pc = vpu_cfg_readl(vpu, VPU_PC_REG);
+	wdt = vpu_cfg_readl(vpu, VPU_WDT_REG);
+	host_to_vpu = vpu_cfg_readl(vpu, HOST_TO_VPU);
+	vpu_to_host = vpu_cfg_readl(vpu, VPU_TO_HOST);
+	vpu_clock_disable(vpu);
+
+	if (running) {
+		len = snprintf(buf, sizeof(buf), "VPU is running\n\n"
+		"FW Version: %s\n"
+		"PC: 0x%x\n"
+		"WDT: 0x%x\n"
+		"Host to VPU: 0x%x\n"
+		"VPU to Host: 0x%x\n",
+		vpu->run.fw_ver, pc, wdt,
+		host_to_vpu, vpu_to_host);
+	} else {
+		len = snprintf(buf, sizeof(buf), "VPU not running\n");
+	}
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static const struct file_operations vpu_debug_fops = {
+	.open = simple_open,
+	.read = vpu_debug_read,
+};
+#endif /* CONFIG_DEBUG_FS */
+
+static void vpu_free_ext_mem(struct mtk_vpu *vpu, u8 fw_type)
+{
+	struct device *dev = vpu->dev;
+	size_t fw_ext_size = fw_type ? VPU_EXT_D_SIZE : VPU_EXT_P_SIZE;
+
+	dma_free_coherent(dev, fw_ext_size, vpu->extmem[fw_type].va,
+			  vpu->extmem[fw_type].pa);
+}
+
+static int vpu_alloc_ext_mem(struct mtk_vpu *vpu, u32 fw_type)
+{
+	struct device *dev = vpu->dev;
+	size_t fw_ext_size = fw_type ? VPU_EXT_D_SIZE : VPU_EXT_P_SIZE;
+	u32 vpu_ext_mem0 = fw_type ? VPU_DMEM_EXT0_ADDR : VPU_PMEM_EXT0_ADDR;
+	u32 vpu_ext_mem1 = fw_type ? VPU_DMEM_EXT1_ADDR : VPU_PMEM_EXT1_ADDR;
+	u32 offset_4gb = vpu->enable_4GB ? 0x40000000 : 0;
+
+	vpu->extmem[fw_type].va = dma_alloc_coherent(dev,
+					       fw_ext_size,
+					       &vpu->extmem[fw_type].pa,
+					       GFP_KERNEL);
+	if (!vpu->extmem[fw_type].va) {
+		dev_err(dev, "Failed to allocate the extended program memory\n");
+		return PTR_ERR(vpu->extmem[fw_type].va);
+	}
+
+	/* Disable extend0. Enable extend1 */
+	vpu_cfg_writel(vpu, 0x1, vpu_ext_mem0);
+	vpu_cfg_writel(vpu, (vpu->extmem[fw_type].pa & 0xFFFFF000) + offset_4gb,
+		       vpu_ext_mem1);
+
+	dev_info(dev, "%s extend memory phy=0x%llx virt=0x%p\n",
+		 fw_type ? "Data" : "Program",
+		 (unsigned long long)vpu->extmem[fw_type].pa,
+		 vpu->extmem[fw_type].va);
+
+	return 0;
+}
+
+static void vpu_ipi_handler(struct mtk_vpu *vpu)
+{
+	struct share_obj *rcv_obj = vpu->recv_buf;
+	struct vpu_ipi_desc *ipi_desc = vpu->ipi_desc;
+
+	if (rcv_obj->id < IPI_MAX && ipi_desc[rcv_obj->id].handler) {
+		ipi_desc[rcv_obj->id].handler(rcv_obj->share_buf,
+					      rcv_obj->len,
+					      ipi_desc[rcv_obj->id].priv);
+		if (rcv_obj->id > IPI_VPU_INIT) {
+			vpu->ipi_id_ack[rcv_obj->id] = true;
+			wake_up(&vpu->ack_wq);
+		}
+	} else {
+		dev_err(vpu->dev, "No such ipi id = %d\n", rcv_obj->id);
+	}
+}
+
+static int vpu_ipi_init(struct mtk_vpu *vpu)
+{
+	/* Disable VPU to host interrupt */
+	vpu_cfg_writel(vpu, 0x0, VPU_TO_HOST);
+
+	/* shared buffer initialization */
+	vpu->recv_buf = (__force struct share_obj *)(vpu->reg.tcm +
+						     VPU_DTCM_OFFSET);
+	vpu->send_buf = vpu->recv_buf + 1;
+	memset(vpu->recv_buf, 0, sizeof(struct share_obj));
+	memset(vpu->send_buf, 0, sizeof(struct share_obj));
+
+	return 0;
+}
+
+static irqreturn_t vpu_irq_handler(int irq, void *priv)
+{
+	struct mtk_vpu *vpu = priv;
+	u32 vpu_to_host;
+	int ret;
+
+	/*
+	 * Clock should have been enabled already.
+	 * Enable again in case vpu_ipi_send times out
+	 * and has disabled the clock.
+	 */
+	ret = clk_enable(vpu->clk);
+	if (ret) {
+		dev_err(vpu->dev, "[VPU] enable clock failed %d\n", ret);
+		return IRQ_NONE;
+	}
+	vpu_to_host = vpu_cfg_readl(vpu, VPU_TO_HOST);
+	if (vpu_to_host & VPU_IPC_INT) {
+		vpu_ipi_handler(vpu);
+	} else {
+		dev_err(vpu->dev, "vpu watchdog timeout! 0x%x", vpu_to_host);
+		queue_work(vpu->wdt.wq, &vpu->wdt.ws);
+	}
+
+	/* VPU won't send another interrupt until we set VPU_TO_HOST to 0. */
+	vpu_cfg_writel(vpu, 0x0, VPU_TO_HOST);
+	clk_disable(vpu->clk);
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static struct dentry *vpu_debugfs;
+#endif
+static int mtk_vpu_probe(struct platform_device *pdev)
+{
+	struct mtk_vpu *vpu;
+	struct device *dev;
+	struct resource *res;
+	int ret = 0;
+
+	dev_dbg(&pdev->dev, "initialization\n");
+
+	dev = &pdev->dev;
+	vpu = devm_kzalloc(dev, sizeof(*vpu), GFP_KERNEL);
+	if (!vpu)
+		return -ENOMEM;
+
+	vpu->dev = &pdev->dev;
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tcm");
+	vpu->reg.tcm = devm_ioremap_resource(dev, res);
+	if (IS_ERR((__force void *)vpu->reg.tcm)) {
+		dev_err(dev, "devm_ioremap_resource vpu tcm failed.\n");
+		return PTR_ERR((__force void *)vpu->reg.tcm);
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_reg");
+	vpu->reg.cfg = devm_ioremap_resource(dev, res);
+	if (IS_ERR((__force void *)vpu->reg.cfg)) {
+		dev_err(dev, "devm_ioremap_resource vpu cfg failed.\n");
+		return PTR_ERR((__force void *)vpu->reg.cfg);
+	}
+
+	/* Get VPU clock */
+	vpu->clk = devm_clk_get(dev, "main");
+	if (!vpu->clk) {
+		dev_err(dev, "get vpu clock failed\n");
+		return -EINVAL;
+	}
+
+	platform_set_drvdata(pdev, vpu);
+
+	ret = clk_prepare(vpu->clk);
+	if (ret) {
+		dev_err(dev, "prepare vpu clock failed\n");
+		return ret;
+	}
+
+	/* VPU watchdog */
+	vpu->wdt.wq = create_singlethread_workqueue("vpu_wdt");
+	if (!vpu->wdt.wq) {
+		dev_err(dev, "initialize wdt workqueue failed\n");
+		return -ENOMEM;
+	}
+	INIT_WORK(&vpu->wdt.ws, vpu_wdt_reset_func);
+	mutex_init(&vpu->vpu_mutex);
+
+	ret = vpu_clock_enable(vpu);
+	if (ret) {
+		dev_err(dev, "enable vpu clock failed\n");
+		goto workqueue_destroy;
+	}
+
+	dev_dbg(dev, "vpu ipi init\n");
+	ret = vpu_ipi_init(vpu);
+	if (ret) {
+		dev_err(dev, "Failed to init ipi\n");
+		goto disable_vpu_clk;
+	}
+
+	/* register vpu initialization IPI */
+	ret = vpu_ipi_register(pdev, IPI_VPU_INIT, vpu_init_ipi_handler,
+			       "vpu_init", vpu);
+	if (ret) {
+		dev_err(dev, "Failed to register IPI_VPU_INIT\n");
+		goto vpu_mutex_destroy;
+	}
+
+#ifdef CONFIG_DEBUG_FS
+	vpu_debugfs = debugfs_create_file("mtk_vpu", S_IRUGO, NULL, (void *)dev,
+					  &vpu_debug_fops);
+	if (!vpu_debugfs) {
+		ret = -ENOMEM;
+		goto cleanup_ipi;
+	}
+#endif
+
+	/* Set PTCM to 96K and DTCM to 32K */
+	vpu_cfg_writel(vpu, 0x2, VPU_TCM_CFG);
+
+	vpu->enable_4GB = !!(totalram_pages > (SZ_2G >> PAGE_SHIFT));
+	dev_info(dev, "4GB mode %u\n", vpu->enable_4GB);
+
+	if (vpu->enable_4GB) {
+		ret = of_reserved_mem_device_init(dev);
+		if (ret)
+			dev_info(dev, "init reserved memory failed\n");
+			/* continue to use dynamic allocation if failed */
+	}
+
+	ret = vpu_alloc_ext_mem(vpu, D_FW);
+	if (ret) {
+		dev_err(dev, "Allocate DM failed\n");
+		goto remove_debugfs;
+	}
+
+	ret = vpu_alloc_ext_mem(vpu, P_FW);
+	if (ret) {
+		dev_err(dev, "Allocate PM failed\n");
+		goto free_d_mem;
+	}
+
+	init_waitqueue_head(&vpu->run.wq);
+	init_waitqueue_head(&vpu->ack_wq);
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(dev, "get IRQ resource failed.\n");
+		ret = -ENXIO;
+		goto free_p_mem;
+	}
+	vpu->reg.irq = platform_get_irq(pdev, 0);
+	ret = devm_request_irq(dev, vpu->reg.irq, vpu_irq_handler, 0,
+			       pdev->name, vpu);
+	if (ret) {
+		dev_err(dev, "failed to request irq\n");
+		goto free_p_mem;
+	}
+
+	vpu_clock_disable(vpu);
+	dev_dbg(dev, "initialization completed\n");
+
+	return 0;
+
+free_p_mem:
+	vpu_free_ext_mem(vpu, P_FW);
+free_d_mem:
+	vpu_free_ext_mem(vpu, D_FW);
+remove_debugfs:
+	of_reserved_mem_device_release(dev);
+#ifdef CONFIG_DEBUG_FS
+	debugfs_remove(vpu_debugfs);
+cleanup_ipi:
+#endif
+	memset(vpu->ipi_desc, 0, sizeof(struct vpu_ipi_desc) * IPI_MAX);
+vpu_mutex_destroy:
+	mutex_destroy(&vpu->vpu_mutex);
+disable_vpu_clk:
+	vpu_clock_disable(vpu);
+workqueue_destroy:
+	destroy_workqueue(vpu->wdt.wq);
+
+	return ret;
+}
+
+static const struct of_device_id mtk_vpu_match[] = {
+	{
+		.compatible = "mediatek,mt8173-vpu",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, mtk_vpu_match);
+
+static int mtk_vpu_remove(struct platform_device *pdev)
+{
+	struct mtk_vpu *vpu = platform_get_drvdata(pdev);
+
+#ifdef CONFIG_DEBUG_FS
+	debugfs_remove(vpu_debugfs);
+#endif
+	if (vpu->wdt.wq) {
+		flush_workqueue(vpu->wdt.wq);
+		destroy_workqueue(vpu->wdt.wq);
+	}
+	vpu_free_ext_mem(vpu, P_FW);
+	vpu_free_ext_mem(vpu, D_FW);
+	mutex_destroy(&vpu->vpu_mutex);
+	clk_unprepare(vpu->clk);
+
+	return 0;
+}
+
+static struct platform_driver mtk_vpu_driver = {
+	.probe	= mtk_vpu_probe,
+	.remove	= mtk_vpu_remove,
+	.driver	= {
+		.name	= "mtk_vpu",
+		.of_match_table = mtk_vpu_match,
+	},
+};
+
+module_platform_driver(mtk_vpu_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Mediatek Video Prosessor Unit driver");
diff --git a/drivers/media/platform/mtk-vpu/mtk_vpu.h b/drivers/media/platform/mtk-vpu/mtk_vpu.h
new file mode 100644
index 0000000..5ab37f0
--- /dev/null
+++ b/drivers/media/platform/mtk-vpu/mtk_vpu.h
@@ -0,0 +1,162 @@
+/*
+* Copyright (c) 2016 MediaTek Inc.
+* Author: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*/
+
+#ifndef _MTK_VPU_H
+#define _MTK_VPU_H
+
+#include <linux/platform_device.h>
+
+/**
+ * VPU (video processor unit) is a tiny processor controlling video hardware
+ * related to video codec, scaling and color format converting.
+ * VPU interfaces with other blocks by share memory and interrupt.
+ **/
+
+typedef void (*ipi_handler_t) (void *data,
+			       unsigned int len,
+			       void *priv);
+
+/**
+ * enum ipi_id - the id of inter-processor interrupt
+ *
+ * @IPI_VPU_INIT:	 The interrupt from vpu is to notfiy kernel
+			 VPU initialization completed.
+			 IPI_VPU_INIT is sent from VPU when firmware is
+			 loaded. AP doesn't need to send IPI_VPU_INIT
+			 command to VPU.
+			 For other IPI below, AP should send the request
+			 to VPU to trigger the interrupt.
+ * @IPI_VENC_H264:	 The interrupt from vpu is to notify kernel to
+			 handle H264 video encoder job, and vice versa.
+ * @IPI_VENC_VP8:	 The interrupt fro vpu is to notify kernel to
+			 handle VP8 video encoder job,, and vice versa.
+ * @IPI_MAX:		 The maximum IPI number
+ */
+
+enum ipi_id {
+	IPI_VPU_INIT = 0,
+	IPI_VENC_H264,
+	IPI_VENC_VP8,
+	IPI_MAX,
+};
+
+/**
+ * enum rst_id - reset id to register reset function for VPU watchdog timeout
+ *
+ * @VPU_RST_ENC: encoder reset id
+ * @VPU_RST_MAX: maximum reset id
+ */
+enum rst_id {
+	VPU_RST_ENC,
+	VPU_RST_MAX,
+};
+
+/**
+ * vpu_ipi_register - register an ipi function
+ *
+ * @pdev:	VPU platform device
+ * @id:		IPI ID
+ * @handler:	IPI handler
+ * @name:	IPI name
+ * @priv:	private data for IPI handler
+ *
+ * Register an ipi function to receive ipi interrupt from VPU.
+ *
+ * Return: Return 0 if ipi registers successfully, otherwise it is failed.
+ */
+int vpu_ipi_register(struct platform_device *pdev, enum ipi_id id,
+		     ipi_handler_t handler, const char *name, void *priv);
+
+/**
+ * vpu_ipi_send - send data from AP to vpu.
+ *
+ * @pdev:	VPU platform device
+ * @id:		IPI ID
+ * @buf:	the data buffer
+ * @len:	the data buffer length
+ *
+ * This function is thread-safe. When this function returns,
+ * VPU has received the data and starts the processing.
+ * When the processing completes, IPI handler registered
+ * by vpu_ipi_register will be called in interrupt context.
+ *
+ * Return: Return 0 if sending data successfully, otherwise it is failed.
+ **/
+int vpu_ipi_send(struct platform_device *pdev,
+		 enum ipi_id id, void *buf,
+		 unsigned int len);
+
+/**
+ * vpu_get_plat_device - get VPU's platform device
+ *
+ * @pdev:	the platform device of the module requesting VPU platform
+ *		device for using VPU API.
+ *
+ * Return: Return NULL if it is failed.
+ * otherwise it is VPU's platform device
+ **/
+struct platform_device *vpu_get_plat_device(struct platform_device *pdev);
+
+/**
+ * vpu_wdt_reg_handler - register a VPU watchdog handler
+ *
+ * @pdev:               VPU platform device
+ * @vpu_wdt_reset_func:	the callback reset function
+ * @private_data:       the private data for reset function
+ * @rst_id:		reset id
+ *
+ * Register a handler performing own tasks when vpu reset by watchdog
+ *
+ * Return: Return 0 if the handler is added successfully,
+ * otherwise it is failed.
+ *
+ **/
+int vpu_wdt_reg_handler(struct platform_device *pdev,
+			void vpu_wdt_reset_func(void *),
+			void *priv, enum rst_id id);
+/**
+ * vpu_get_venc_hw_capa - get video encoder hardware capability
+ *
+ * @pdev:	VPU platform device
+ *
+ * Return: video encoder hardware capability
+ **/
+unsigned int vpu_get_venc_hw_capa(struct platform_device *pdev);
+
+/**
+ * vpu_load_firmware - download VPU firmware and boot it
+ *
+ * @pdev:	VPU platform device
+ *
+ * Return: Return 0 if downloading firmware successfully,
+ * otherwise it is failed
+ **/
+int vpu_load_firmware(struct platform_device *pdev);
+
+/**
+ * vpu_mapping_dm_addr - Mapping DTCM/DMEM to kernel virtual address
+ *
+ * @pdev:	VPU platform device
+ * @dmem_addr:	VPU's data memory address
+ *
+ * Mapping the VPU's DTCM (Data Tightly-Coupled Memory) /
+ * DMEM (Data Extended Memory) memory address to
+ * kernel virtual address.
+ *
+ * Return: Return ERR_PTR(-EINVAL) if mapping failed,
+ * otherwise the mapped kernel virtual address
+ **/
+void *vpu_mapping_dm_addr(struct platform_device *pdev,
+			  u32 dtcm_dmem_addr);
+#endif /* _MTK_VPU_H */