Char: serial167, remove bottomhalf
- Cy_EVENT_OPEN_WAKEUP is simple wake_up
- Cy_EVENT_HANGUP is wake_up + tty_hangup, which schedules its own work
- Cy_EVENT_WRITE_WAKEUP is tty_wakeup which may be called directly too
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index cbf21cc..df8cd0c 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -357,18 +357,6 @@
local_irq_restore(flags);
} /* cy_start */
-/*
- * This routine is used by the interrupt handler to schedule
- * processing in the software interrupt portion of the driver
- * (also known as the "bottom half"). This can be called any
- * number of times for any channel without harm.
- */
-static inline void cy_sched_event(struct cyclades_port *info, int event)
-{
- info->event |= 1 << event; /* remember what kind of event and who */
- schedule_work(&info->tqueue);
-} /* cy_sched_event */
-
/* The real interrupt service routines are called
whenever the card wants its hand held--chars
received, out buffer empty, modem change, etc.
@@ -483,10 +471,12 @@
&& (info->flags & ASYNC_CHECK_CD)) {
if (mdm_status & CyDCD) {
/* CP('!'); */
- cy_sched_event(info, Cy_EVENT_OPEN_WAKEUP);
+ wake_up_interruptible(&info->open_wait);
} else {
/* CP('@'); */
- cy_sched_event(info, Cy_EVENT_HANGUP);
+ tty_hangup(info->tty);
+ wake_up_interruptible(&info->open_wait);
+ info->flags &= ~ASYNC_NORMAL_ACTIVE;
}
}
if ((mdm_change & CyCTS)
@@ -496,8 +486,7 @@
/* !!! cy_start isn't used because... */
info->tty->stopped = 0;
base_addr[CyIER] |= CyTxMpty;
- cy_sched_event(info,
- Cy_EVENT_WRITE_WAKEUP);
+ tty_wakeup(info->tty);
}
} else {
if (!(mdm_status & CyCTS)) {
@@ -543,9 +532,6 @@
info->last_active = jiffies;
if (info->tty == 0) {
base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
- if (info->xmit_cnt < WAKEUP_CHARS) {
- cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP);
- }
base_addr[CyTEOIR] = CyNOTRANS;
return IRQ_HANDLED;
}
@@ -627,9 +613,9 @@
}
}
- if (info->xmit_cnt < WAKEUP_CHARS) {
- cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP);
- }
+ if (info->xmit_cnt < WAKEUP_CHARS)
+ tty_wakeup(info->tty);
+
base_addr[CyTEOIR] = (char_count != saved_cnt) ? 0 : CyNOTRANS;
return IRQ_HANDLED;
} /* cy_tx_interrupt */
@@ -690,49 +676,6 @@
return IRQ_HANDLED;
} /* cy_rx_interrupt */
-/*
- * This routine is used to handle the "bottom half" processing for the
- * serial driver, known also the "software interrupt" processing.
- * This processing is done at the kernel interrupt level, after the
- * cy#/_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This
- * is where time-consuming activities which can not be done in the
- * interrupt driver proper are done; the interrupt driver schedules
- * them using cy_sched_event(), and they get done here.
- *
- * This is done through one level of indirection--the task queue.
- * When a hardware interrupt service routine wants service by the
- * driver's bottom half, it enqueues the appropriate tq_struct (one
- * per port) to the keventd work queue and sets a request flag
- * that the work queue be processed.
- *
- * Although this may seem unwieldy, it gives the system a way to
- * pass an argument (in this case the pointer to the cyclades_port
- * structure) to the bottom half of the driver. Previous kernels
- * had to poll every port to see if that port needed servicing.
- */
-static void do_softint(struct work_struct *ugly_api)
-{
- struct cyclades_port *info =
- container_of(ugly_api, struct cyclades_port, tqueue);
- struct tty_struct *tty;
-
- tty = info->tty;
- if (!tty)
- return;
-
- if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) {
- tty_hangup(info->tty);
- wake_up_interruptible(&info->open_wait);
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- }
- if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) {
- wake_up_interruptible(&info->open_wait);
- }
- if (test_and_clear_bit(Cy_EVENT_WRITE_WAKEUP, &info->event)) {
- tty_wakeup(tty);
- }
-} /* do_softint */
-
/* This is called whenever a port becomes active;
interrupts are enabled and DTR & RTS are turned on.
*/
@@ -1743,7 +1686,6 @@
if (tty->driver->flush_buffer)
tty->driver->flush_buffer(tty);
tty_ldisc_flush(tty);
- info->event = 0;
info->tty = NULL;
if (info->blocked_open) {
if (info->close_delay) {
@@ -2234,7 +2176,6 @@
info->rco = baud_co[DefSpeed] >> 5; /* Rx CO */
info->close_delay = 0;
info->x_char = 0;
- info->event = 0;
info->count = 0;
#ifdef SERIAL_DEBUG_COUNT
printk("cyc: %d: setting count to 0\n",
@@ -2243,7 +2184,6 @@
info->blocked_open = 0;
info->default_threshold = 0;
info->default_timeout = 0;
- INIT_WORK(&info->tqueue, do_softint);
init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->close_wait);
/* info->session */
diff --git a/include/linux/serial167.h b/include/linux/serial167.h
index 71b6df2..59c81b7 100644
--- a/include/linux/serial167.h
+++ b/include/linux/serial167.h
@@ -37,7 +37,6 @@
int ignore_status_mask;
int close_delay;
int IER; /* Interrupt Enable Register */
- unsigned long event;
unsigned long last_active;
int count; /* # of fd on device */
int x_char; /* to be pushed out ASAP */
@@ -49,7 +48,6 @@
int xmit_cnt;
int default_threshold;
int default_timeout;
- struct work_struct tqueue;
wait_queue_head_t open_wait;
wait_queue_head_t close_wait;
struct cyclades_monitor mon;
@@ -67,18 +65,6 @@
#define CYGETDEFTIMEOUT 0x435908
#define CYSETDEFTIMEOUT 0x435909
-/*
- * Events are used to schedule things to happen at timer-interrupt
- * time, instead of at cy interrupt time.
- */
-#define Cy_EVENT_READ_PROCESS 0
-#define Cy_EVENT_WRITE_WAKEUP 1
-#define Cy_EVENT_HANGUP 2
-#define Cy_EVENT_BREAK 3
-#define Cy_EVENT_OPEN_WAKEUP 4
-
-
-
#define CyMaxChipsPerCard 1
/**** cd2401 registers ****/