| /* |
| * Copyright (c) 2016-2018 Mellanox Technologies. All rights reserved. |
| * Copyright (c) 2016-2018 Vadim Pasternak <vadimp@mellanox.com> |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the names of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/device.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_data/mlxreg.h> |
| #include <linux/platform_device.h> |
| #include <linux/spinlock.h> |
| #include <linux/regmap.h> |
| #include <linux/workqueue.h> |
| |
| /* Offset of event and mask registers from status register. */ |
| #define MLXREG_HOTPLUG_EVENT_OFF 1 |
| #define MLXREG_HOTPLUG_MASK_OFF 2 |
| #define MLXREG_HOTPLUG_AGGR_MASK_OFF 1 |
| |
| /* ASIC health parameters. */ |
| #define MLXREG_HOTPLUG_HEALTH_MASK 0x02 |
| #define MLXREG_HOTPLUG_RST_CNTR 3 |
| |
| #define MLXREG_HOTPLUG_ATTRS_MAX 24 |
| |
| /** |
| * struct mlxreg_hotplug_priv_data - platform private data: |
| * @irq: platform device interrupt number; |
| * @pdev: platform device; |
| * @plat: platform data; |
| * @dwork: delayed work template; |
| * @lock: spin lock; |
| * @hwmon: hwmon device; |
| * @mlxreg_hotplug_attr: sysfs attributes array; |
| * @mlxreg_hotplug_dev_attr: sysfs sensor device attribute array; |
| * @group: sysfs attribute group; |
| * @groups: list of sysfs attribute group for hwmon registration; |
| * @cell: location of top aggregation interrupt register; |
| * @mask: top aggregation interrupt common mask; |
| * @aggr_cache: last value of aggregation register status; |
| */ |
| struct mlxreg_hotplug_priv_data { |
| int irq; |
| struct device *dev; |
| struct platform_device *pdev; |
| struct mlxreg_hotplug_platform_data *plat; |
| struct regmap *regmap; |
| struct delayed_work dwork_irq; |
| struct delayed_work dwork; |
| spinlock_t lock; /* sync with interrupt */ |
| struct device *hwmon; |
| struct attribute *mlxreg_hotplug_attr[MLXREG_HOTPLUG_ATTRS_MAX + 1]; |
| struct sensor_device_attribute_2 |
| mlxreg_hotplug_dev_attr[MLXREG_HOTPLUG_ATTRS_MAX]; |
| struct attribute_group group; |
| const struct attribute_group *groups[2]; |
| u32 cell; |
| u32 mask; |
| u32 aggr_cache; |
| bool after_probe; |
| }; |
| |
| static int mlxreg_hotplug_device_create(struct device *dev, |
| struct mlxreg_core_data *data) |
| { |
| /* |
| * Return if adapter number is negative. It could be in case hotplug |
| * event is not associated with hotplug device. |
| */ |
| if (data->hpdev.nr < 0) |
| return 0; |
| |
| data->hpdev.adapter = i2c_get_adapter(data->hpdev.nr); |
| if (!data->hpdev.adapter) { |
| dev_err(dev, "Failed to get adapter for bus %d\n", |
| data->hpdev.nr); |
| return -EFAULT; |
| } |
| |
| data->hpdev.client = i2c_new_device(data->hpdev.adapter, |
| data->hpdev.brdinfo); |
| if (!data->hpdev.client) { |
| dev_err(dev, "Failed to create client %s at bus %d at addr 0x%02x\n", |
| data->hpdev.brdinfo->type, data->hpdev.nr, |
| data->hpdev.brdinfo->addr); |
| |
| i2c_put_adapter(data->hpdev.adapter); |
| data->hpdev.adapter = NULL; |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| static void mlxreg_hotplug_device_destroy(struct mlxreg_core_data *data) |
| { |
| if (data->hpdev.client) { |
| i2c_unregister_device(data->hpdev.client); |
| data->hpdev.client = NULL; |
| } |
| |
| if (data->hpdev.adapter) { |
| i2c_put_adapter(data->hpdev.adapter); |
| data->hpdev.adapter = NULL; |
| } |
| } |
| |
| static ssize_t mlxreg_hotplug_attr_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct mlxreg_hotplug_priv_data *priv = dev_get_drvdata(dev); |
| struct mlxreg_core_hotplug_platform_data *pdata; |
| int index = to_sensor_dev_attr_2(attr)->index; |
| int nr = to_sensor_dev_attr_2(attr)->nr; |
| struct mlxreg_core_item *item; |
| struct mlxreg_core_data *data; |
| u32 regval; |
| int ret; |
| |
| pdata = dev_get_platdata(&priv->pdev->dev); |
| item = pdata->items + nr; |
| data = item->data + index; |
| |
| ret = regmap_read(priv->regmap, data->reg, ®val); |
| if (ret) |
| return ret; |
| |
| if (item->health) { |
| regval &= data->mask; |
| } else { |
| /* Bit = 0 : functional if item->inversed is true. */ |
| if (item->inversed) |
| regval = !(regval & data->mask); |
| else |
| regval = !!(regval & data->mask); |
| } |
| |
| return sprintf(buf, "%u\n", regval); |
| } |
| |
| #define PRIV_ATTR(i) priv->mlxreg_hotplug_attr[i] |
| #define PRIV_DEV_ATTR(i) priv->mlxreg_hotplug_dev_attr[i] |
| |
| static int mlxreg_hotplug_attr_init(struct mlxreg_hotplug_priv_data *priv) |
| { |
| struct mlxreg_core_hotplug_platform_data *pdata; |
| struct mlxreg_core_item *item; |
| struct mlxreg_core_data *data; |
| int num_attrs = 0, id = 0, i, j; |
| |
| pdata = dev_get_platdata(&priv->pdev->dev); |
| item = pdata->items; |
| |
| /* Go over all kinds of items - psu, pwr, fan. */ |
| for (i = 0; i < pdata->counter; i++, item++) { |
| num_attrs += item->count; |
| data = item->data; |
| /* Go over all units within the item. */ |
| for (j = 0; j < item->count; j++, data++, id++) { |
| PRIV_ATTR(id) = &PRIV_DEV_ATTR(id).dev_attr.attr; |
| PRIV_ATTR(id)->name = devm_kasprintf(&priv->pdev->dev, |
| GFP_KERNEL, |
| data->label); |
| |
| if (!PRIV_ATTR(id)->name) { |
| dev_err(priv->dev, "Memory allocation failed for attr %d.\n", |
| id); |
| return -ENOMEM; |
| } |
| |
| PRIV_DEV_ATTR(id).dev_attr.attr.name = |
| PRIV_ATTR(id)->name; |
| PRIV_DEV_ATTR(id).dev_attr.attr.mode = 0444; |
| PRIV_DEV_ATTR(id).dev_attr.show = |
| mlxreg_hotplug_attr_show; |
| PRIV_DEV_ATTR(id).nr = i; |
| PRIV_DEV_ATTR(id).index = j; |
| sysfs_attr_init(&PRIV_DEV_ATTR(id).dev_attr.attr); |
| } |
| } |
| |
| priv->group.attrs = devm_kzalloc(&priv->pdev->dev, num_attrs * |
| sizeof(struct attribute *), |
| GFP_KERNEL); |
| if (!priv->group.attrs) |
| return -ENOMEM; |
| |
| priv->group.attrs = priv->mlxreg_hotplug_attr; |
| priv->groups[0] = &priv->group; |
| priv->groups[1] = NULL; |
| |
| return 0; |
| } |
| |
| static void |
| mlxreg_hotplug_work_helper(struct mlxreg_hotplug_priv_data *priv, |
| struct mlxreg_core_item *item) |
| { |
| struct mlxreg_core_data *data; |
| u32 asserted, regval, bit; |
| int ret; |
| |
| /* |
| * Validate if item related to received signal type is valid. |
| * It should never happen, excepted the situation when some |
| * piece of hardware is broken. In such situation just produce |
| * error message and return. Caller must continue to handle the |
| * signals from other devices if any. |
| */ |
| if (unlikely(!item)) { |
| dev_err(priv->dev, "False signal: at offset:mask 0x%02x:0x%02x.\n", |
| item->reg, item->mask); |
| |
| return; |
| } |
| |
| /* Mask event. */ |
| ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_MASK_OFF, |
| 0); |
| if (ret) |
| goto out; |
| |
| /* Read status. */ |
| ret = regmap_read(priv->regmap, item->reg, ®val); |
| if (ret) |
| goto out; |
| |
| /* Set asserted bits and save last status. */ |
| regval &= item->mask; |
| asserted = item->cache ^ regval; |
| item->cache = regval; |
| |
| for_each_set_bit(bit, (unsigned long *)&asserted, 8) { |
| data = item->data + bit; |
| if (regval & BIT(bit)) { |
| if (item->inversed) |
| mlxreg_hotplug_device_destroy(data); |
| else |
| mlxreg_hotplug_device_create(priv->dev, data); |
| } else { |
| if (item->inversed) |
| mlxreg_hotplug_device_create(priv->dev, data); |
| else |
| mlxreg_hotplug_device_destroy(data); |
| } |
| } |
| |
| /* Acknowledge event. */ |
| ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_EVENT_OFF, |
| 0); |
| if (ret) |
| goto out; |
| |
| /* Unmask event. */ |
| ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_MASK_OFF, |
| item->mask); |
| |
| out: |
| if (ret) |
| dev_err(priv->dev, "Failed to complete workqueue.\n"); |
| } |
| |
| static void |
| mlxreg_hotplug_health_work_helper(struct mlxreg_hotplug_priv_data *priv, |
| struct mlxreg_core_item *item) |
| { |
| struct mlxreg_core_data *data = item->data; |
| u32 regval; |
| int i, ret = 0; |
| |
| for (i = 0; i < item->count; i++, data++) { |
| /* Mask event. */ |
| ret = regmap_write(priv->regmap, data->reg + |
| MLXREG_HOTPLUG_MASK_OFF, 0); |
| if (ret) |
| goto out; |
| |
| /* Read status. */ |
| ret = regmap_read(priv->regmap, data->reg, ®val); |
| if (ret) |
| goto out; |
| |
| regval &= data->mask; |
| item->cache = regval; |
| if (regval == MLXREG_HOTPLUG_HEALTH_MASK) { |
| if ((data->health_cntr++ == MLXREG_HOTPLUG_RST_CNTR) || |
| !priv->after_probe) { |
| mlxreg_hotplug_device_create(priv->dev, data); |
| data->attached = true; |
| } |
| } else { |
| if (data->attached) { |
| mlxreg_hotplug_device_destroy(data); |
| data->attached = false; |
| data->health_cntr = 0; |
| } |
| } |
| |
| /* Acknowledge event. */ |
| ret = regmap_write(priv->regmap, data->reg + |
| MLXREG_HOTPLUG_EVENT_OFF, 0); |
| if (ret) |
| goto out; |
| |
| /* Unmask event. */ |
| ret = regmap_write(priv->regmap, data->reg + |
| MLXREG_HOTPLUG_MASK_OFF, data->mask); |
| if (ret) |
| goto out; |
| } |
| |
| out: |
| if (ret) |
| dev_err(priv->dev, "Failed to complete workqueue.\n"); |
| } |
| |
| /* |
| * mlxreg_hotplug_work_handler - performs traversing of device interrupt |
| * registers according to the below hierarchy schema: |
| * |
| * Aggregation registers (status/mask) |
| * PSU registers: *---* |
| * *-----------------* | | |
| * |status/event/mask|-----> | * | |
| * *-----------------* | | |
| * Power registers: | | |
| * *-----------------* | | |
| * |status/event/mask|-----> | * | |
| * *-----------------* | | |
| * FAN registers: | |--> CPU |
| * *-----------------* | | |
| * |status/event/mask|-----> | * | |
| * *-----------------* | | |
| * ASIC registers: | | |
| * *-----------------* | | |
| * |status/event/mask|-----> | * | |
| * *-----------------* | | |
| * *---* |
| * |
| * In case some system changed are detected: FAN in/out, PSU in/out, power |
| * cable attached/detached, ASIC health good/bad, relevant device is created |
| * or destroyed. |
| */ |
| static void mlxreg_hotplug_work_handler(struct work_struct *work) |
| { |
| struct mlxreg_core_hotplug_platform_data *pdata; |
| struct mlxreg_hotplug_priv_data *priv; |
| struct mlxreg_core_item *item; |
| u32 regval, aggr_asserted; |
| unsigned long flags; |
| int i, ret; |
| |
| priv = container_of(work, struct mlxreg_hotplug_priv_data, |
| dwork_irq.work); |
| pdata = dev_get_platdata(&priv->pdev->dev); |
| item = pdata->items; |
| |
| /* Mask aggregation event. */ |
| ret = regmap_write(priv->regmap, pdata->cell + |
| MLXREG_HOTPLUG_AGGR_MASK_OFF, 0); |
| if (ret < 0) |
| goto out; |
| |
| /* Read aggregation status. */ |
| ret = regmap_read(priv->regmap, pdata->cell, ®val); |
| if (ret) |
| goto out; |
| |
| regval &= pdata->mask; |
| aggr_asserted = priv->aggr_cache ^ regval; |
| priv->aggr_cache = regval; |
| |
| /* Handle topology and health configuration changes. */ |
| for (i = 0; i < pdata->counter; i++, item++) { |
| if (aggr_asserted & item->aggr_mask) { |
| if (item->health) |
| mlxreg_hotplug_health_work_helper(priv, item); |
| else |
| mlxreg_hotplug_work_helper(priv, item); |
| } |
| } |
| |
| if (aggr_asserted) { |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| /* |
| * It is possible, that some signals have been inserted, while |
| * interrupt has been masked by mlxreg_hotplug_work_handler. |
| * In this case such signals will be missed. In order to handle |
| * these signals delayed work is canceled and work task |
| * re-scheduled for immediate execution. It allows to handle |
| * missed signals, if any. In other case work handler just |
| * validates that no new signals have been received during |
| * masking. |
| */ |
| cancel_delayed_work(&priv->dwork_irq); |
| schedule_delayed_work(&priv->dwork_irq, 0); |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| return; |
| } |
| |
| /* Unmask aggregation event (no need acknowledge). */ |
| ret = regmap_write(priv->regmap, pdata->cell + |
| MLXREG_HOTPLUG_AGGR_MASK_OFF, pdata->mask); |
| |
| out: |
| if (ret) |
| dev_err(priv->dev, "Failed to complete workqueue.\n"); |
| } |
| |
| static int mlxreg_hotplug_set_irq(struct mlxreg_hotplug_priv_data *priv) |
| { |
| struct mlxreg_core_hotplug_platform_data *pdata; |
| struct mlxreg_core_item *item; |
| int i, ret; |
| |
| pdata = dev_get_platdata(&priv->pdev->dev); |
| item = pdata->items; |
| |
| for (i = 0; i < pdata->counter; i++, item++) { |
| /* Clear group presense event. */ |
| ret = regmap_write(priv->regmap, item->reg + |
| MLXREG_HOTPLUG_EVENT_OFF, 0); |
| if (ret) |
| goto out; |
| |
| /* Set group initial status as mask and unmask group event. */ |
| if (item->inversed) { |
| item->cache = item->mask; |
| ret = regmap_write(priv->regmap, item->reg + |
| MLXREG_HOTPLUG_MASK_OFF, |
| item->mask); |
| if (ret) |
| goto out; |
| } |
| } |
| |
| /* Keep aggregation initial status as zero and unmask events. */ |
| ret = regmap_write(priv->regmap, pdata->cell + |
| MLXREG_HOTPLUG_AGGR_MASK_OFF, pdata->mask); |
| if (ret) |
| goto out; |
| |
| /* Keep low aggregation initial status as zero and unmask events. */ |
| if (pdata->cell_low) { |
| ret = regmap_write(priv->regmap, pdata->cell_low + |
| MLXREG_HOTPLUG_AGGR_MASK_OFF, |
| pdata->mask_low); |
| if (ret) |
| goto out; |
| } |
| |
| /* Invoke work handler for initializing hot plug devices setting. */ |
| mlxreg_hotplug_work_handler(&priv->dwork_irq.work); |
| |
| out: |
| if (ret) |
| dev_err(priv->dev, "Failed to set interrupts.\n"); |
| enable_irq(priv->irq); |
| return ret; |
| } |
| |
| static void mlxreg_hotplug_unset_irq(struct mlxreg_hotplug_priv_data *priv) |
| { |
| struct mlxreg_core_hotplug_platform_data *pdata; |
| struct mlxreg_core_item *item; |
| struct mlxreg_core_data *data; |
| int count, i, j; |
| |
| pdata = dev_get_platdata(&priv->pdev->dev); |
| item = pdata->items; |
| disable_irq(priv->irq); |
| cancel_delayed_work_sync(&priv->dwork_irq); |
| |
| /* Mask low aggregation event, if defined. */ |
| if (pdata->cell_low) |
| regmap_write(priv->regmap, pdata->cell_low + |
| MLXREG_HOTPLUG_AGGR_MASK_OFF, 0); |
| |
| /* Mask aggregation event. */ |
| regmap_write(priv->regmap, pdata->cell + MLXREG_HOTPLUG_AGGR_MASK_OFF, |
| 0); |
| |
| /* Clear topology configurations. */ |
| for (i = 0; i < pdata->counter; i++, item++) { |
| data = item->data; |
| /* Mask group presense event. */ |
| regmap_write(priv->regmap, data->reg + MLXREG_HOTPLUG_MASK_OFF, |
| 0); |
| /* Clear group presense event. */ |
| regmap_write(priv->regmap, data->reg + |
| MLXREG_HOTPLUG_EVENT_OFF, 0); |
| |
| /* Remove all the attached devices in group. */ |
| count = item->count; |
| for (j = 0; j < count; j++, data++) |
| mlxreg_hotplug_device_destroy(data); |
| } |
| } |
| |
| static irqreturn_t mlxreg_hotplug_irq_handler(int irq, void *dev) |
| { |
| struct mlxreg_hotplug_priv_data *priv; |
| |
| priv = (struct mlxreg_hotplug_priv_data *)dev; |
| |
| /* Schedule work task for immediate execution.*/ |
| schedule_delayed_work(&priv->dwork_irq, 0); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int mlxreg_hotplug_probe(struct platform_device *pdev) |
| { |
| struct mlxreg_core_hotplug_platform_data *pdata; |
| struct mlxreg_hotplug_priv_data *priv; |
| int err; |
| |
| pdata = dev_get_platdata(&pdev->dev); |
| if (!pdata) { |
| dev_err(&pdev->dev, "Failed to get platform data.\n"); |
| return -EINVAL; |
| } |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| if (pdata->irq) { |
| priv->irq = pdata->irq; |
| } else { |
| priv->irq = platform_get_irq(pdev, 0); |
| if (priv->irq < 0) { |
| dev_err(&pdev->dev, "Failed to get platform irq: %d\n", |
| priv->irq); |
| return priv->irq; |
| } |
| } |
| |
| priv->regmap = pdata->regmap; |
| priv->dev = pdev->dev.parent; |
| priv->pdev = pdev; |
| |
| err = devm_request_irq(&pdev->dev, priv->irq, |
| mlxreg_hotplug_irq_handler, IRQF_TRIGGER_FALLING |
| | IRQF_SHARED, "mlxreg-hotplug", priv); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to request irq: %d\n", err); |
| return err; |
| } |
| |
| disable_irq(priv->irq); |
| spin_lock_init(&priv->lock); |
| INIT_DELAYED_WORK(&priv->dwork_irq, mlxreg_hotplug_work_handler); |
| /* Perform initial interrupts setup. */ |
| mlxreg_hotplug_set_irq(priv); |
| |
| priv->after_probe = true; |
| dev_set_drvdata(&pdev->dev, priv); |
| |
| err = mlxreg_hotplug_attr_init(priv); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to allocate attributes: %d\n", |
| err); |
| return err; |
| } |
| |
| priv->hwmon = devm_hwmon_device_register_with_groups(&pdev->dev, |
| "mlxreg_hotplug", priv, priv->groups); |
| if (IS_ERR(priv->hwmon)) { |
| dev_err(&pdev->dev, "Failed to register hwmon device %ld\n", |
| PTR_ERR(priv->hwmon)); |
| return PTR_ERR(priv->hwmon); |
| } |
| |
| return 0; |
| } |
| |
| static int mlxreg_hotplug_remove(struct platform_device *pdev) |
| { |
| struct mlxreg_hotplug_priv_data *priv = dev_get_drvdata(&pdev->dev); |
| |
| /* Clean interrupts setup. */ |
| mlxreg_hotplug_unset_irq(priv); |
| |
| return 0; |
| } |
| |
| static struct platform_driver mlxreg_hotplug_driver = { |
| .driver = { |
| .name = "mlxreg-hotplug", |
| }, |
| .probe = mlxreg_hotplug_probe, |
| .remove = mlxreg_hotplug_remove, |
| }; |
| |
| module_platform_driver(mlxreg_hotplug_driver); |
| |
| MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>"); |
| MODULE_DESCRIPTION("Mellanox regmap hotplug platform driver"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_ALIAS("platform:mlxreg-hotplug"); |