[PPC] Remove 83xx from arch/ppc
83xx exists in arch/powerpc as well as cuImage support to boot from
a u-boot that doesn't support device trees.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 6473fa7..08e083d 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -78,18 +78,18 @@
default 6xx
config 6xx
- bool "6xx/7xx/74xx/52xx/82xx/83xx"
+ bool "6xx/7xx/74xx/52xx/82xx"
select PPC_FPU
help
There are four types of PowerPC chips supported. The more common
types (601, 603, 604, 740, 750, 7400), the older Freescale
(formerly Motorola) embedded versions (821, 823, 850, 855, 860,
- 52xx, 82xx, 83xx), the IBM embedded versions (403 and 405) and
+ 52xx, 82xx), the IBM embedded versions (403 and 405) and
the Book E embedded processors from IBM (44x) and Freescale (85xx).
For support for 64-bit processors, set ARCH=powerpc.
Unless you are building a kernel for one of the embedded processor
systems, choose 6xx.
- Also note that because the 52xx, 82xx, & 83xx family have a 603e
+ Also note that because the 52xx, 82xx family have a 603e
core, specific support for that chipset is asked later on.
config 40x
@@ -153,7 +153,7 @@
config ALTIVEC
bool "AltiVec Support"
depends on 6xx
- depends on !8260 && !83xx
+ depends on !8260
---help---
This option enables kernel support for the Altivec extensions to the
PowerPC processor. The kernel currently supports saving and restoring
@@ -184,7 +184,7 @@
config TAU
bool "Thermal Management Support"
- depends on 6xx && !8260 && !83xx
+ depends on 6xx && !8260
help
G3 and G4 processors have an on-chip temperature sensor called the
'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
@@ -721,16 +721,6 @@
Support for the LITE5200B dev board for the MPC5200 from Freescale.
This is the new board with 2 PCI slots.
-config MPC834x_SYS
- bool "Freescale MPC834x SYS"
- help
- This option enables support for the MPC 834x SYS evaluation board.
-
- Be aware that PCI buses can only function when SYS board is plugged
- into the PIB (Platform IO Board) board from Freescale which provide
- 3 PCI slots. The PIBs PCI initialization is the bootloader's
- responsibility.
-
config EV64360
bool "Marvell-EV64360BP"
help
@@ -774,18 +764,6 @@
The MPC8272 CPM has a different internal dpram setup than other CPM2
devices
-config 83xx
- bool
- default y if MPC834x_SYS
-
-config MPC834x
- bool
- default y if MPC834x_SYS
-
-config PPC_83xx
- bool
- default y if 83xx
-
config CPM1
bool
depends on 8xx
@@ -811,8 +789,7 @@
bool
depends on SANDPOINT || SPRUCE || PPLUS || \
PRPMC750 || PRPMC800 || LOPEC || \
- (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
- 83xx
+ (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D
default y
config FORCE
@@ -1074,7 +1051,7 @@
config PPC_INDIRECT_PCI
bool
depends on PCI
- default y if 40x || 44x || 85xx || 83xx || PPC_PREP
+ default y if 40x || 44x || 85xx || PPC_PREP
default n
config EISA
@@ -1091,8 +1068,8 @@
bool
config PCI
- bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx
- default y if !40x && !CPM2 && !8xx && !83xx && !85xx
+ bool "PCI support" if 40x || CPM2 || 85xx || PPC_MPC52xx
+ default y if !40x && !CPM2 && !8xx && !85xx
default PCI_QSPAN if !4xx && !CPM2 && 8xx
help
Find out whether your system includes a PCI bus. PCI is the name of
@@ -1106,11 +1083,6 @@
config PCI_SYSCALL
def_bool PCI
-config MPC83xx_PCI2
- bool "Support for 2nd PCI host controller"
- depends on PCI && MPC834x
- default y if MPC834x_SYS
-
config PCI_QSPAN
bool "QSpan PCI"
depends on !4xx && !CPM2 && 8xx