tty_port: Add a port level carrier detect operation
This is the first step to generalising the various pieces of waiting logic
duplicated in all sorts of serial drivers.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/char/esp.c b/drivers/char/esp.c
index 7f077c0..45ec263 100644
--- a/drivers/char/esp.c
+++ b/drivers/char/esp.c
@@ -2054,6 +2054,15 @@
wake_up_interruptible(&info->port.open_wait);
}
+static int esp_carrier_raised(struct tty_port *port)
+{
+ struct esp_struct *info = container_of(port, struct esp_struct, port);
+ serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT);
+ if (serial_in(info, UART_ESI_STAT2) & UART_MSR_DCD)
+ return 1;
+ return 0;
+}
+
/*
* ------------------------------------------------------------
* esp_open() and friends
@@ -2066,17 +2075,19 @@
int retval;
int do_clocal = 0;
unsigned long flags;
+ int cd;
+ struct tty_port *port = &info->port;
/*
* If the device is in the middle of being closed, then block
* until it's done, and then try again.
*/
if (tty_hung_up_p(filp) ||
- (info->port.flags & ASYNC_CLOSING)) {
- if (info->port.flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->port.close_wait);
+ (port->flags & ASYNC_CLOSING)) {
+ if (port->flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&port->close_wait);
#ifdef SERIAL_DO_RESTART
- if (info->port.flags & ASYNC_HUP_NOTIFY)
+ if (port->flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
else
return -ERESTARTSYS;
@@ -2091,7 +2102,7 @@
*/
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
- info->port.flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -2101,20 +2112,20 @@
/*
* Block waiting for the carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
- * this loop, info->port.count is dropped by one, so that
+ * this loop, port->count is dropped by one, so that
* rs_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&info->port.open_wait, &wait);
+ add_wait_queue(&port->open_wait, &wait);
#ifdef SERIAL_DEBUG_OPEN
printk(KERN_DEBUG "block_til_ready before block: ttys%d, count = %d\n",
- info->line, info->port.count);
+ info->line, port->count);
#endif
spin_lock_irqsave(&info->lock, flags);
if (!tty_hung_up_p(filp))
- info->port.count--;
- info->port.blocked_open++;
+ port->count--;
+ port->blocked_open++;
while (1) {
if ((tty->termios->c_cflag & CBAUD)) {
unsigned int scratch;
@@ -2129,9 +2140,9 @@
}
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
- !(info->port.flags & ASYNC_INITIALIZED)) {
+ !(port->flags & ASYNC_INITIALIZED)) {
#ifdef SERIAL_DO_RESTART
- if (info->port.flags & ASYNC_HUP_NOTIFY)
+ if (port->flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
@@ -2141,11 +2152,9 @@
break;
}
- serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT);
- if (serial_in(info, UART_ESI_STAT2) & UART_MSR_DCD)
- do_clocal = 1;
+ cd = tty_port_carrier_raised(port);
- if (!(info->port.flags & ASYNC_CLOSING) &&
+ if (!(port->flags & ASYNC_CLOSING) &&
(do_clocal))
break;
if (signal_pending(current)) {
@@ -2154,25 +2163,25 @@
}
#ifdef SERIAL_DEBUG_OPEN
printk(KERN_DEBUG "block_til_ready blocking: ttys%d, count = %d\n",
- info->line, info->port.count);
+ info->line, port->count);
#endif
spin_unlock_irqrestore(&info->lock, flags);
schedule();
spin_lock_irqsave(&info->lock, flags);
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->port.open_wait, &wait);
+ remove_wait_queue(&port->open_wait, &wait);
if (!tty_hung_up_p(filp))
- info->port.count++;
- info->port.blocked_open--;
+ port->count++;
+ port->blocked_open--;
spin_unlock_irqrestore(&info->lock, flags);
#ifdef SERIAL_DEBUG_OPEN
printk(KERN_DEBUG "block_til_ready after blocking: ttys%d, count = %d\n",
- info->line, info->port.count);
+ info->line, port->count);
#endif
if (retval)
return retval;
- info->port.flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -2329,6 +2338,10 @@
.tiocmset = esp_tiocmset,
};
+static const struct tty_port_operations esp_port_ops = {
+ .esp_carrier_raised,
+};
+
/*
* The serial driver boot-time initialization code!
*/
@@ -2415,6 +2428,8 @@
offset = 0;
do {
+ tty_port_init(&info->port);
+ info->port.ops = &esp_port_ops;
info->io_port = esp[i] + offset;
info->irq = irq[i];
info->line = (i * 8) + (offset / 8);
@@ -2437,8 +2452,6 @@
info->config.flow_off = flow_off;
info->config.pio_threshold = pio_threshold;
info->next_port = ports;
- init_waitqueue_head(&info->port.open_wait);
- init_waitqueue_head(&info->port.close_wait);
init_waitqueue_head(&info->delta_msr_wait);
init_waitqueue_head(&info->break_wait);
ports = info;
diff --git a/drivers/char/generic_serial.c b/drivers/char/generic_serial.c
index c6090f8..2356994 100644
--- a/drivers/char/generic_serial.c
+++ b/drivers/char/generic_serial.c
@@ -397,7 +397,8 @@
int gs_block_til_ready(void *port_, struct file * filp)
{
- struct gs_port *port = port_;
+ struct gs_port *gp = port_;
+ struct tty_port *port = &gp->port;
DECLARE_WAITQUEUE(wait, current);
int retval;
int do_clocal = 0;
@@ -409,16 +410,16 @@
if (!port) return 0;
- tty = port->port.tty;
+ tty = port->tty;
gs_dprintk (GS_DEBUG_BTR, "Entering gs_block_till_ready.\n");
/*
* If the device is in the middle of being closed, then block
* until it's done, and then try again.
*/
- if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&port->port.close_wait);
- if (port->port.flags & ASYNC_HUP_NOTIFY)
+ if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
+ interruptible_sleep_on(&port->close_wait);
+ if (port->flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
else
return -ERESTARTSYS;
@@ -432,7 +433,7 @@
*/
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
- port->port.flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -444,34 +445,34 @@
/*
* Block waiting for the carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
- * this loop, port->port.count is dropped by one, so that
+ * this loop, port->count is dropped by one, so that
* rs_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&port->port.open_wait, &wait);
+ add_wait_queue(&port->open_wait, &wait);
gs_dprintk (GS_DEBUG_BTR, "after add waitq.\n");
- spin_lock_irqsave(&port->driver_lock, flags);
+ spin_lock_irqsave(&gp->driver_lock, flags);
if (!tty_hung_up_p(filp)) {
- port->port.count--;
+ port->count--;
}
- spin_unlock_irqrestore(&port->driver_lock, flags);
- port->port.blocked_open++;
+ spin_unlock_irqrestore(&gp->driver_lock, flags);
+ port->blocked_open++;
while (1) {
- CD = port->rd->get_CD (port);
+ CD = tty_port_carrier_raised(port);
gs_dprintk (GS_DEBUG_BTR, "CD is now %d.\n", CD);
set_current_state (TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
- !(port->port.flags & ASYNC_INITIALIZED)) {
- if (port->port.flags & ASYNC_HUP_NOTIFY)
+ !(port->flags & ASYNC_INITIALIZED)) {
+ if (port->flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
break;
}
- if (!(port->port.flags & ASYNC_CLOSING) &&
+ if (!(port->flags & ASYNC_CLOSING) &&
(do_clocal || CD))
break;
gs_dprintk (GS_DEBUG_BTR, "signal_pending is now: %d (%lx)\n",
@@ -483,17 +484,17 @@
schedule();
}
gs_dprintk (GS_DEBUG_BTR, "Got out of the loop. (%d)\n",
- port->port.blocked_open);
+ port->blocked_open);
set_current_state (TASK_RUNNING);
- remove_wait_queue(&port->port.open_wait, &wait);
+ remove_wait_queue(&port->open_wait, &wait);
if (!tty_hung_up_p(filp)) {
- port->port.count++;
+ port->count++;
}
- port->port.blocked_open--;
+ port->blocked_open--;
if (retval)
return retval;
- port->port.flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
func_exit ();
return 0;
}
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 04e4549..b3da485 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -830,20 +830,28 @@
return 0;
}
-static int block_til_ready(struct tty_struct *tty, struct file *filp,
- struct isi_port *port)
+static int isicom_carrier_raised(struct tty_port *port)
{
- struct isi_board *card = port->card;
+ struct isi_port *ip = container_of(port, struct isi_port, port);
+ return (ip->status & ISI_DCD)?1 : 0;
+}
+
+static int block_til_ready(struct tty_struct *tty, struct file *filp,
+ struct isi_port *ip)
+{
+ struct isi_board *card = ip->card;
+ struct tty_port *port = &ip->port;
int do_clocal = 0, retval;
unsigned long flags;
DECLARE_WAITQUEUE(wait, current);
+ int cd;
/* block if port is in the process of being closed */
- if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) {
+ if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
pr_dbg("block_til_ready: close in progress.\n");
- interruptible_sleep_on(&port->port.close_wait);
- if (port->port.flags & ASYNC_HUP_NOTIFY)
+ interruptible_sleep_on(&port->close_wait);
+ if (port->flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
else
return -ERESTARTSYS;
@@ -854,7 +862,7 @@
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
pr_dbg("block_til_ready: non-block mode.\n");
- port->port.flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -864,29 +872,29 @@
/* block waiting for DCD to be asserted, and while
callout dev is busy */
retval = 0;
- add_wait_queue(&port->port.open_wait, &wait);
+ add_wait_queue(&port->open_wait, &wait);
spin_lock_irqsave(&card->card_lock, flags);
if (!tty_hung_up_p(filp))
- port->port.count--;
- port->port.blocked_open++;
+ port->count--;
+ port->blocked_open++;
spin_unlock_irqrestore(&card->card_lock, flags);
while (1) {
- raise_dtr_rts(port);
+ raise_dtr_rts(ip);
set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(port->port.flags & ASYNC_INITIALIZED)) {
- if (port->port.flags & ASYNC_HUP_NOTIFY)
+ if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
+ if (port->flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
break;
}
- if (!(port->port.flags & ASYNC_CLOSING) &&
- (do_clocal || (port->status & ISI_DCD))) {
+ cd = tty_port_carrier_raised(port);
+ if (!(port->flags & ASYNC_CLOSING) &&
+ (do_clocal || cd))
break;
- }
if (signal_pending(current)) {
retval = -ERESTARTSYS;
break;
@@ -894,15 +902,15 @@
schedule();
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->port.open_wait, &wait);
+ remove_wait_queue(&port->open_wait, &wait);
spin_lock_irqsave(&card->card_lock, flags);
if (!tty_hung_up_p(filp))
- port->port.count++;
- port->port.blocked_open--;
+ port->count++;
+ port->blocked_open--;
spin_unlock_irqrestore(&card->card_lock, flags);
if (retval)
return retval;
- port->port.flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -1452,6 +1460,10 @@
.break_ctl = isicom_send_break,
};
+static const struct tty_port_operations isicom_port_ops = {
+ .carrier_raised = isicom_carrier_raised,
+};
+
static int __devinit reset_card(struct pci_dev *pdev,
const unsigned int card, unsigned int *signature)
{
@@ -1794,6 +1806,7 @@
spin_lock_init(&isi_card[idx].card_lock);
for (channel = 0; channel < 16; channel++, port++) {
tty_port_init(&port->port);
+ port->port.ops = &isicom_port_ops;
port->magic = ISICOM_MAGIC;
port->card = &isi_card[idx];
port->channel = channel;
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 4b10770..c4682f9 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -151,7 +151,7 @@
static char *stli_serialname = "ttyE";
static struct tty_driver *stli_serial;
-
+static const struct tty_port_operations stli_port_ops;
#define STLI_TXBUFSIZE 4096
@@ -1183,6 +1183,12 @@
/*****************************************************************************/
+static int stli_carrier_raised(struct tty_port *port)
+{
+ struct stliport *portp = container_of(port, struct stliport, port);
+ return (portp->sigs & TIOCM_CD) ? 1 : 0;
+}
+
/*
* Possibly need to wait for carrier (DCD signal) to come high. Say
* maybe because if we are clocal then we don't need to wait...
@@ -1193,6 +1199,7 @@
{
unsigned long flags;
int rc, doclocal;
+ struct tty_port *port = &portp->port;
rc = 0;
doclocal = 0;
@@ -1203,7 +1210,7 @@
spin_lock_irqsave(&stli_lock, flags);
portp->openwaitcnt++;
if (! tty_hung_up_p(filp))
- portp->port.count--;
+ port->count--;
spin_unlock_irqrestore(&stli_lock, flags);
for (;;) {
@@ -1212,27 +1219,27 @@
&portp->asig, sizeof(asysigs_t), 0)) < 0)
break;
if (tty_hung_up_p(filp) ||
- ((portp->port.flags & ASYNC_INITIALIZED) == 0)) {
- if (portp->port.flags & ASYNC_HUP_NOTIFY)
+ ((port->flags & ASYNC_INITIALIZED) == 0)) {
+ if (port->flags & ASYNC_HUP_NOTIFY)
rc = -EBUSY;
else
rc = -ERESTARTSYS;
break;
}
- if (((portp->port.flags & ASYNC_CLOSING) == 0) &&
- (doclocal || (portp->sigs & TIOCM_CD))) {
+ if (((port->flags & ASYNC_CLOSING) == 0) &&
+ (doclocal || tty_port_carrier_raised(port))) {
break;
}
if (signal_pending(current)) {
rc = -ERESTARTSYS;
break;
}
- interruptible_sleep_on(&portp->port.open_wait);
+ interruptible_sleep_on(&port->open_wait);
}
spin_lock_irqsave(&stli_lock, flags);
if (! tty_hung_up_p(filp))
- portp->port.count++;
+ port->count++;
portp->openwaitcnt--;
spin_unlock_irqrestore(&stli_lock, flags);
@@ -2696,6 +2703,7 @@
continue;
}
tty_port_init(&portp->port);
+ portp->port.ops = &stli_port_ops;
portp->magic = STLI_PORTMAGIC;
portp->portnr = i;
portp->brdnr = brdp->brdnr;
@@ -4518,6 +4526,10 @@
.tiocmset = stli_tiocmset,
};
+static const struct tty_port_operations stli_port_ops = {
+ .carrier_raised = stli_carrier_raised,
+};
+
/*****************************************************************************/
/*
* Loadable module initialization stuff.
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index 12d327a..8b0da97 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -206,6 +206,7 @@
static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
static void moxa_setup_empty_event(struct tty_struct *);
static void moxa_shut_down(struct tty_struct *);
+static int moxa_carrier_raised(struct tty_port *);
/*
* moxa board interface functions:
*/
@@ -405,6 +406,10 @@
.tiocmset = moxa_tiocmset,
};
+static const struct tty_port_operations moxa_port_ops = {
+ .carrier_raised = moxa_carrier_raised,
+};
+
static struct tty_driver *moxaDriver;
static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0);
static DEFINE_SPINLOCK(moxa_lock);
@@ -826,6 +831,7 @@
for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) {
tty_port_init(&p->port);
+ p->port.ops = &moxa_port_ops;
p->type = PORT_16550A;
p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
}
@@ -1115,15 +1121,27 @@
tty_port_tty_set(&ch->port, NULL);
}
+static int moxa_carrier_raised(struct tty_port *port)
+{
+ struct moxa_port *ch = container_of(port, struct moxa_port, port);
+ int dcd;
+
+ spin_lock_bh(&moxa_lock);
+ dcd = ch->DCDState;
+ spin_unlock_bh(&moxa_lock);
+ return dcd;
+}
+
static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp,
struct moxa_port *ch)
{
+ struct tty_port *port = &ch->port;
DEFINE_WAIT(wait);
int retval = 0;
u8 dcd;
while (1) {
- prepare_to_wait(&ch->port.open_wait, &wait, TASK_INTERRUPTIBLE);
+ prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp)) {
#ifdef SERIAL_DO_RESTART
retval = -ERESTARTSYS;
@@ -1132,9 +1150,7 @@
#endif
break;
}
- spin_lock_bh(&moxa_lock);
- dcd = ch->DCDState;
- spin_unlock_bh(&moxa_lock);
+ dcd = tty_port_carrier_raised(port);
if (dcd)
break;
@@ -1144,7 +1160,7 @@
}
schedule();
}
- finish_wait(&ch->port.open_wait, &wait);
+ finish_wait(&port->open_wait, &wait);
return retval;
}
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 0477669..eafbbcf 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -541,13 +541,21 @@
return status;
}
+static int mxser_carrier_raised(struct tty_port *port)
+{
+ struct mxser_port *mp = container_of(port, struct mxser_port, port);
+ return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0;
+}
+
static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp,
- struct mxser_port *port)
+ struct mxser_port *mp)
{
DECLARE_WAITQUEUE(wait, current);
int retval;
int do_clocal = 0;
unsigned long flags;
+ int cd;
+ struct tty_port *port = &mp->port;
/*
* If non-blocking mode is set, or the port is not enabled,
@@ -555,7 +563,7 @@
*/
if ((filp->f_flags & O_NONBLOCK) ||
test_bit(TTY_IO_ERROR, &tty->flags)) {
- port->port.flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -565,34 +573,33 @@
/*
* Block waiting for the carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
- * this loop, port->port.count is dropped by one, so that
+ * this loop, port->count is dropped by one, so that
* mxser_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&port->port.open_wait, &wait);
+ add_wait_queue(&port->open_wait, &wait);
- spin_lock_irqsave(&port->slock, flags);
+ spin_lock_irqsave(&mp->slock, flags);
if (!tty_hung_up_p(filp))
- port->port.count--;
- spin_unlock_irqrestore(&port->slock, flags);
- port->port.blocked_open++;
+ port->count--;
+ spin_unlock_irqrestore(&mp->slock, flags);
+ port->blocked_open++;
while (1) {
- spin_lock_irqsave(&port->slock, flags);
- outb(inb(port->ioaddr + UART_MCR) |
- UART_MCR_DTR | UART_MCR_RTS, port->ioaddr + UART_MCR);
- spin_unlock_irqrestore(&port->slock, flags);
+ spin_lock_irqsave(&mp->slock, flags);
+ outb(inb(mp->ioaddr + UART_MCR) |
+ UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR);
+ spin_unlock_irqrestore(&mp->slock, flags);
set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(port->port.flags & ASYNC_INITIALIZED)) {
- if (port->port.flags & ASYNC_HUP_NOTIFY)
+ if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
+ if (port->flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
break;
}
- if (!(port->port.flags & ASYNC_CLOSING) &&
- (do_clocal ||
- (inb(port->ioaddr + UART_MSR) & UART_MSR_DCD)))
+ cd = tty_port_carrier_raised(port);
+ if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd))
break;
if (signal_pending(current)) {
retval = -ERESTARTSYS;
@@ -601,13 +608,13 @@
schedule();
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->port.open_wait, &wait);
+ remove_wait_queue(&port->open_wait, &wait);
if (!tty_hung_up_p(filp))
- port->port.count++;
- port->port.blocked_open--;
+ port->count++;
+ port->blocked_open--;
if (retval)
return retval;
- port->port.flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -2449,6 +2456,10 @@
.tiocmset = mxser_tiocmset,
};
+struct tty_port_operations mxser_port_ops = {
+ .carrier_raised = mxser_carrier_raised,
+};
+
/*
* The MOXA Smartio/Industio serial driver boot-time initialization code!
*/
@@ -2482,6 +2493,7 @@
for (i = 0; i < brd->info->nports; i++) {
info = &brd->ports[i];
tty_port_init(&info->port);
+ info->port.ops = &mxser_port_ops;
info->board = brd;
info->stop_rx = 0;
info->ldisc_stop_rx = 0;
diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c
index a8f68a3..ec2afd1 100644
--- a/drivers/char/rio/rio_linux.c
+++ b/drivers/char/rio/rio_linux.c
@@ -173,7 +173,7 @@
static void rio_enable_tx_interrupts(void *ptr);
static void rio_disable_rx_interrupts(void *ptr);
static void rio_enable_rx_interrupts(void *ptr);
-static int rio_get_CD(void *ptr);
+static int rio_carrier_raised(struct tty_port *port);
static void rio_shutdown_port(void *ptr);
static int rio_set_real_termios(void *ptr);
static void rio_hungup(void *ptr);
@@ -224,7 +224,6 @@
rio_enable_tx_interrupts,
rio_disable_rx_interrupts,
rio_enable_rx_interrupts,
- rio_get_CD,
rio_shutdown_port,
rio_set_real_termios,
rio_chars_in_buffer,
@@ -476,9 +475,9 @@
/* Jeez. Isn't this simple? */
-static int rio_get_CD(void *ptr)
+static int rio_carrier_raised(struct tty_port *port)
{
- struct Port *PortP = ptr;
+ struct Port *PortP = container_of(port, struct Port, gs.port);
int rv;
func_enter();
@@ -806,7 +805,9 @@
return p;
}
-
+static const struct tty_port_operations rio_port_ops = {
+ .carrier_raised = rio_carrier_raised,
+};
static int rio_init_datastructures(void)
{
@@ -842,17 +843,14 @@
goto free6;
}
rio_dprintk(RIO_DEBUG_INIT, "initing port %d (%d)\n", i, port->Mapped);
+ tty_port_init(&port->gs.port);
+ port->gs.port.ops = &rio_port_ops;
port->PortNum = i;
port->gs.magic = RIO_MAGIC;
port->gs.close_delay = HZ / 2;
port->gs.closing_wait = 30 * HZ;
port->gs.rd = &rio_real_driver;
spin_lock_init(&port->portSem);
- /*
- * Initializing wait queue
- */
- init_waitqueue_head(&port->gs.port.open_wait);
- init_waitqueue_head(&port->gs.port.close_wait);
}
#else
/* We could postpone initializing them to when they are configured. */
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index 2c6c8f3..6ad1c2a 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -857,23 +857,40 @@
rc_shutdown_board(bp);
}
+static int carrier_raised(struct tty_port *port)
+{
+ struct riscom_port *p = container_of(port, struct riscom_port, port);
+ struct riscom_board *bp = port_Board(p);
+ unsigned long flags;
+ int CD;
+
+ spin_lock_irqsave(&riscom_lock, flags);
+ rc_out(bp, CD180_CAR, port_No(p));
+ CD = rc_in(bp, CD180_MSVR) & MSVR_CD;
+ rc_out(bp, CD180_MSVR, MSVR_RTS);
+ bp->DTR &= ~(1u << port_No(p));
+ rc_out(bp, RC_DTR, bp->DTR);
+ spin_unlock_irqrestore(&riscom_lock, flags);
+ return CD;
+}
+
static int block_til_ready(struct tty_struct *tty, struct file *filp,
- struct riscom_port *port)
+ struct riscom_port *rp)
{
DECLARE_WAITQUEUE(wait, current);
- struct riscom_board *bp = port_Board(port);
int retval;
int do_clocal = 0;
int CD;
unsigned long flags;
+ struct tty_port *port = &rp->port;
/*
* If the device is in the middle of being closed, then block
* until it's done, and then try again.
*/
- if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&port->port.close_wait);
- if (port->port.flags & ASYNC_HUP_NOTIFY)
+ if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
+ interruptible_sleep_on(&port->close_wait);
+ if (port->flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
else
return -ERESTARTSYS;
@@ -885,7 +902,7 @@
*/
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
- port->port.flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -900,37 +917,29 @@
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&port->port.open_wait, &wait);
+ add_wait_queue(&port->open_wait, &wait);
spin_lock_irqsave(&riscom_lock, flags);
if (!tty_hung_up_p(filp))
- port->port.count--;
+ port->count--;
spin_unlock_irqrestore(&riscom_lock, flags);
- port->port.blocked_open++;
+ port->blocked_open++;
while (1) {
- spin_lock_irqsave(&riscom_lock, flags);
- rc_out(bp, CD180_CAR, port_No(port));
- CD = rc_in(bp, CD180_MSVR) & MSVR_CD;
- rc_out(bp, CD180_MSVR, MSVR_RTS);
- bp->DTR &= ~(1u << port_No(port));
- rc_out(bp, RC_DTR, bp->DTR);
-
- spin_unlock_irqrestore(&riscom_lock, flags);
-
+ CD = tty_port_carrier_raised(port);
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
- !(port->port.flags & ASYNC_INITIALIZED)) {
- if (port->port.flags & ASYNC_HUP_NOTIFY)
+ !(port->flags & ASYNC_INITIALIZED)) {
+ if (port->flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
break;
}
- if (!(port->port.flags & ASYNC_CLOSING) &&
+ if (!(port->flags & ASYNC_CLOSING) &&
(do_clocal || CD))
break;
if (signal_pending(current)) {
@@ -940,14 +949,14 @@
schedule();
}
__set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->port.open_wait, &wait);
+ remove_wait_queue(&port->open_wait, &wait);
if (!tty_hung_up_p(filp))
- port->port.count++;
- port->port.blocked_open--;
+ port->count++;
+ port->blocked_open--;
if (retval)
return retval;
- port->port.flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -1510,6 +1519,11 @@
.break_ctl = rc_send_break,
};
+static const struct tty_port_operations riscom_port_ops = {
+ .carrier_raised = carrier_raised,
+};
+
+
static int __init rc_init_drivers(void)
{
int error;
@@ -1541,6 +1555,7 @@
memset(rc_port, 0, sizeof(rc_port));
for (i = 0; i < RC_NPORT * RC_NBOARD; i++) {
tty_port_init(&rc_port[i].port);
+ rc_port[i].port.ops = &riscom_port_ops;
rc_port[i].magic = RISCOM8_MAGIC;
}
return 0;
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index 584d791..4a4110e 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -135,6 +135,7 @@
static int is_PCI[NUM_BOARDS];
static rocketModel_t rocketModel[NUM_BOARDS];
static int max_board;
+static const struct tty_port_operations rocket_port_ops;
/*
* The following arrays define the interrupt bits corresponding to each AIOP.
@@ -649,9 +650,8 @@
info->board = board;
info->aiop = aiop;
info->chan = chan;
- info->port.closing_wait = 3000;
- info->port.close_delay = 50;
- init_waitqueue_head(&info->port.open_wait);
+ tty_port_init(&info->port);
+ info->port.ops = &rocket_port_ops;
init_completion(&info->close_wait);
info->flags &= ~ROCKET_MODE_MASK;
switch (pc104[board][line]) {
@@ -864,11 +864,18 @@
}
}
+static int carrier_raised(struct tty_port *port)
+{
+ struct r_port *info = container_of(port, struct r_port, port);
+ return (sGetChanStatusLo(&info->channel) & CD_ACT) ? 1 : 0;
+}
+
/* info->port.count is considered critical, protected by spinlocks. */
static int block_til_ready(struct tty_struct *tty, struct file *filp,
struct r_port *info)
{
DECLARE_WAITQUEUE(wait, current);
+ struct tty_port *port = &info->port;
int retval;
int do_clocal = 0, extra_count = 0;
unsigned long flags;
@@ -898,13 +905,13 @@
/*
* Block waiting for the carrier detect and the line to become free. While we are in
- * this loop, info->port.count is dropped by one, so that rp_close() knows when to free things.
+ * this loop, port->count is dropped by one, so that rp_close() knows when to free things.
* We restore it upon exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&info->port.open_wait, &wait);
+ add_wait_queue(&port->open_wait, &wait);
#ifdef ROCKET_DEBUG_OPEN
- printk(KERN_INFO "block_til_ready before block: ttyR%d, count = %d\n", info->line, info->port.count);
+ printk(KERN_INFO "block_til_ready before block: ttyR%d, count = %d\n", info->line, port->count);
#endif
spin_lock_irqsave(&info->slock, flags);
@@ -913,10 +920,10 @@
#else
if (!tty_hung_up_p(filp)) {
extra_count = 1;
- info->port.count--;
+ port->count--;
}
#endif
- info->port.blocked_open++;
+ port->blocked_open++;
spin_unlock_irqrestore(&info->slock, flags);
@@ -933,7 +940,8 @@
retval = -ERESTARTSYS;
break;
}
- if (!(info->flags & ROCKET_CLOSING) && (do_clocal || (sGetChanStatusLo(&info->channel) & CD_ACT)))
+ if (!(info->flags & ROCKET_CLOSING) &&
+ (do_clocal || tty_port_carrier_raised(port)))
break;
if (signal_pending(current)) {
retval = -ERESTARTSYS;
@@ -941,24 +949,24 @@
}
#ifdef ROCKET_DEBUG_OPEN
printk(KERN_INFO "block_til_ready blocking: ttyR%d, count = %d, flags=0x%0x\n",
- info->line, info->port.count, info->flags);
+ info->line, port->count, info->flags);
#endif
schedule(); /* Don't hold spinlock here, will hang PC */
}
__set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->port.open_wait, &wait);
+ remove_wait_queue(&port->open_wait, &wait);
spin_lock_irqsave(&info->slock, flags);
if (extra_count)
- info->port.count++;
- info->port.blocked_open--;
+ port->count++;
+ port->blocked_open--;
spin_unlock_irqrestore(&info->slock, flags);
#ifdef ROCKET_DEBUG_OPEN
printk(KERN_INFO "block_til_ready after blocking: ttyR%d, count = %d\n",
- info->line, info->port.count);
+ info->line, port->count);
#endif
if (retval)
return retval;
@@ -2371,6 +2379,10 @@
.tiocmset = rp_tiocmset,
};
+static const struct tty_port_operations rocket_port_ops = {
+ .carrier_raised = carrier_raised,
+};
+
/*
* The module "startup" routine; it's run when the module is loaded.
*/
diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c
index 7b0c352..0c97f34 100644
--- a/drivers/char/ser_a2232.c
+++ b/drivers/char/ser_a2232.c
@@ -122,7 +122,7 @@
static void a2232_enable_tx_interrupts(void *ptr);
static void a2232_disable_rx_interrupts(void *ptr);
static void a2232_enable_rx_interrupts(void *ptr);
-static int a2232_get_CD(void *ptr);
+static int a2232_carrier_raised(struct tty_port *port);
static void a2232_shutdown_port(void *ptr);
static int a2232_set_real_termios(void *ptr);
static int a2232_chars_in_buffer(void *ptr);
@@ -148,7 +148,6 @@
a2232_enable_tx_interrupts,
a2232_disable_rx_interrupts,
a2232_enable_rx_interrupts,
- a2232_get_CD,
a2232_shutdown_port,
a2232_set_real_termios,
a2232_chars_in_buffer,
@@ -260,9 +259,10 @@
port->disable_rx = 0;
}
-static int a2232_get_CD(void *ptr)
+static int a2232_carrier_raised(struct tty_port *port)
{
- return ((struct a2232_port *) ptr)->cd_status;
+ struct a2232_port *ap = container_of(port, struct a2232_port, gs.port);
+ return ap->cd_status;
}
static void a2232_shutdown_port(void *ptr)
@@ -638,6 +638,10 @@
return IRQ_HANDLED;
}
+static const struct tty_port_operations a2232_port_ops = {
+ .carrier_raised = a2232_carrier_raised,
+};
+
static void a2232_init_portstructs(void)
{
struct a2232_port *port;
@@ -645,6 +649,8 @@
for (i = 0; i < MAX_A2232_BOARDS*NUMLINES; i++) {
port = a2232_ports + i;
+ tty_port_init(&port->gs.port);
+ port->gs.port.ops = &a2232_port_ops;
port->which_a2232 = i/NUMLINES;
port->which_port_on_a2232 = i%NUMLINES;
port->disable_rx = port->throttle_input = port->cd_status = 0;
@@ -652,11 +658,6 @@
port->gs.close_delay = HZ/2;
port->gs.closing_wait = 30 * HZ;
port->gs.rd = &a2232_real_driver;
-#ifdef NEW_WRITE_LOCKING
- mutex_init(&(port->gs.port_write_mutex));
-#endif
- init_waitqueue_head(&port->gs.port.open_wait);
- init_waitqueue_head(&port->gs.port.close_wait);
}
}
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 963b03f..12aecdaf 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -130,6 +130,8 @@
static DEFINE_MUTEX(stl_brdslock);
static struct stlbrd *stl_brds[STL_MAXBRDS];
+static const struct tty_port_operations stl_port_ops;
+
/*
* Per board state flags. Used with the state field of the board struct.
* Not really much here!
@@ -786,6 +788,12 @@
/*****************************************************************************/
+static int stl_carrier_raised(struct tty_port *port)
+{
+ struct stlport *portp = container_of(port, struct stlport, port);
+ return (portp->sigs & TIOCM_CD) ? 1 : 0;
+}
+
/*
* Possibly need to wait for carrier (DCD signal) to come high. Say
* maybe because if we are clocal then we don't need to wait...
@@ -796,6 +804,7 @@
{
unsigned long flags;
int rc, doclocal;
+ struct tty_port *port = &portp->port;
pr_debug("stl_waitcarrier(portp=%p,filp=%p)\n", portp, filp);
@@ -809,32 +818,32 @@
portp->openwaitcnt++;
if (! tty_hung_up_p(filp))
- portp->port.count--;
+ port->count--;
for (;;) {
/* Takes brd_lock internally */
stl_setsignals(portp, 1, 1);
if (tty_hung_up_p(filp) ||
- ((portp->port.flags & ASYNC_INITIALIZED) == 0)) {
- if (portp->port.flags & ASYNC_HUP_NOTIFY)
+ ((port->flags & ASYNC_INITIALIZED) == 0)) {
+ if (port->flags & ASYNC_HUP_NOTIFY)
rc = -EBUSY;
else
rc = -ERESTARTSYS;
break;
}
- if (((portp->port.flags & ASYNC_CLOSING) == 0) &&
- (doclocal || (portp->sigs & TIOCM_CD)))
+ if (((port->flags & ASYNC_CLOSING) == 0) &&
+ (doclocal || tty_port_carrier_raised(port)))
break;
if (signal_pending(current)) {
rc = -ERESTARTSYS;
break;
}
/* FIXME */
- interruptible_sleep_on(&portp->port.open_wait);
+ interruptible_sleep_on(&port->open_wait);
}
if (! tty_hung_up_p(filp))
- portp->port.count++;
+ port->count++;
portp->openwaitcnt--;
spin_unlock_irqrestore(&stallion_lock, flags);
@@ -1776,6 +1785,7 @@
break;
}
tty_port_init(&portp->port);
+ portp->port.ops = &stl_port_ops;
portp->magic = STL_PORTMAGIC;
portp->portnr = i;
portp->brdnr = panelp->brdnr;
@@ -2659,6 +2669,10 @@
.tiocmset = stl_tiocmset,
};
+static const struct tty_port_operations stl_port_ops = {
+ .carrier_raised = stl_carrier_raised,
+};
+
/*****************************************************************************/
/* CD1400 HARDWARE FUNCTIONS */
/*****************************************************************************/
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index ba4e862..a71bc58 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -279,7 +279,7 @@
static void sx_enable_tx_interrupts(void *ptr);
static void sx_disable_rx_interrupts(void *ptr);
static void sx_enable_rx_interrupts(void *ptr);
-static int sx_get_CD(void *ptr);
+static int sx_carrier_raised(struct tty_port *port);
static void sx_shutdown_port(void *ptr);
static int sx_set_real_termios(void *ptr);
static void sx_close(void *ptr);
@@ -360,7 +360,6 @@
sx_enable_tx_interrupts,
sx_disable_rx_interrupts,
sx_enable_rx_interrupts,
- sx_get_CD,
sx_shutdown_port,
sx_set_real_termios,
sx_chars_in_buffer,
@@ -791,7 +790,7 @@
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "getsignals: %d/%d (%d/%d) "
"%02x/%02x\n",
(o_stat & OP_DTR) != 0, (o_stat & OP_RTS) != 0,
- port->c_dcd, sx_get_CD(port),
+ port->c_dcd, tty_port_carrier_raised(&port->gs.port),
sx_read_channel_byte(port, hi_ip),
sx_read_channel_byte(port, hi_state));
@@ -1190,7 +1189,7 @@
hi_state = sx_read_channel_byte(port, hi_state);
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "Checking modem signals (%d/%d)\n",
- port->c_dcd, sx_get_CD(port));
+ port->c_dcd, tty_port_carrier_raised(&port->gs.port));
if (hi_state & ST_BREAK) {
hi_state &= ~ST_BREAK;
@@ -1202,11 +1201,11 @@
hi_state &= ~ST_DCD;
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "got a DCD change.\n");
sx_write_channel_byte(port, hi_state, hi_state);
- c_dcd = sx_get_CD(port);
+ c_dcd = tty_port_carrier_raised(&port->gs.port);
sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD is now %d\n", c_dcd);
if (c_dcd != port->c_dcd) {
port->c_dcd = c_dcd;
- if (sx_get_CD(port)) {
+ if (tty_port_carrier_raised(&port->gs.port)) {
/* DCD went UP */
if ((sx_read_channel_byte(port, hi_hstat) !=
HS_IDLE_CLOSED) &&
@@ -1415,13 +1414,10 @@
}
/* Jeez. Isn't this simple? */
-static int sx_get_CD(void *ptr)
+static int sx_carrier_raised(struct tty_port *port)
{
- struct sx_port *port = ptr;
- func_enter2();
-
- func_exit();
- return ((sx_read_channel_byte(port, hi_ip) & IP_DCD) != 0);
+ struct sx_port *sp = container_of(port, struct sx_port, gs.port);
+ return ((sx_read_channel_byte(sp, hi_ip) & IP_DCD) != 0);
}
/* Jeez. Isn't this simple? */
@@ -1536,7 +1532,7 @@
}
/* tty->low_latency = 1; */
- port->c_dcd = sx_get_CD(port);
+ port->c_dcd = sx_carrier_raised(&port->gs.port);
sx_dprintk(SX_DEBUG_OPEN, "at open: cd=%d\n", port->c_dcd);
func_exit();
@@ -2354,6 +2350,10 @@
.tiocmset = sx_tiocmset,
};
+static const struct tty_port_operations sx_port_ops = {
+ .carrier_raised = sx_carrier_raised,
+};
+
static int sx_init_drivers(void)
{
int error;
@@ -2410,6 +2410,7 @@
for (j = 0; j < boards[i].nports; j++) {
sx_dprintk(SX_DEBUG_INIT, "initing port %d\n", j);
tty_port_init(&port->gs.port);
+ port->gs.port.ops = &sx_port_ops;
port->gs.magic = SX_MAGIC;
port->gs.close_delay = HZ / 2;
port->gs.closing_wait = 30 * HZ;
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index 500f517..fb2e6b5 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -3281,6 +3281,23 @@
} /* end of mgsl_hangup() */
+/*
+ * carrier_raised()
+ *
+ * Return true if carrier is raised
+ */
+
+static int carrier_raised(struct tty_port *port)
+{
+ unsigned long flags;
+ struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
+
+ spin_lock_irqsave(&info->irq_spinlock, flags);
+ usc_get_serial_signals(info);
+ spin_unlock_irqrestore(&info->irq_spinlock, flags);
+ return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
+}
+
/* block_til_ready()
*
* Block the current process until the specified port
@@ -3302,6 +3319,8 @@
bool do_clocal = false;
bool extra_count = false;
unsigned long flags;
+ int dcd;
+ struct tty_port *port = &info->port;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready on %s\n",
@@ -3309,7 +3328,7 @@
if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
/* nonblock mode is set or port is not enabled */
- info->port.flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -3318,25 +3337,25 @@
/* Wait for carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
- * this loop, info->port.count is dropped by one, so that
+ * this loop, port->count is dropped by one, so that
* mgsl_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&info->port.open_wait, &wait);
+ add_wait_queue(&port->open_wait, &wait);
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready before block on %s count=%d\n",
- __FILE__,__LINE__, tty->driver->name, info->port.count );
+ __FILE__,__LINE__, tty->driver->name, port->count );
spin_lock_irqsave(&info->irq_spinlock, flags);
if (!tty_hung_up_p(filp)) {
extra_count = true;
- info->port.count--;
+ port->count--;
}
spin_unlock_irqrestore(&info->irq_spinlock, flags);
- info->port.blocked_open++;
+ port->blocked_open++;
while (1) {
if (tty->termios->c_cflag & CBAUD) {
@@ -3348,20 +3367,16 @@
set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){
- retval = (info->port.flags & ASYNC_HUP_NOTIFY) ?
+ if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
+ retval = (port->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS;
break;
}
- spin_lock_irqsave(&info->irq_spinlock,flags);
- usc_get_serial_signals(info);
- spin_unlock_irqrestore(&info->irq_spinlock,flags);
+ dcd = tty_port_carrier_raised(&info->port);
- if (!(info->port.flags & ASYNC_CLOSING) &&
- (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) {
+ if (!(port->flags & ASYNC_CLOSING) && (do_clocal || dcd))
break;
- }
if (signal_pending(current)) {
retval = -ERESTARTSYS;
@@ -3370,24 +3385,24 @@
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready blocking on %s count=%d\n",
- __FILE__,__LINE__, tty->driver->name, info->port.count );
+ __FILE__,__LINE__, tty->driver->name, port->count );
schedule();
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->port.open_wait, &wait);
+ remove_wait_queue(&port->open_wait, &wait);
if (extra_count)
- info->port.count++;
- info->port.blocked_open--;
+ port->count++;
+ port->blocked_open--;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready after blocking on %s count=%d\n",
- __FILE__,__LINE__, tty->driver->name, info->port.count );
+ __FILE__,__LINE__, tty->driver->name, port->count );
if (!retval)
- info->port.flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
return retval;
@@ -4304,6 +4319,11 @@
} /* end of mgsl_add_device() */
+static const struct tty_port_operations mgsl_port_ops = {
+ .carrier_raised = carrier_raised,
+};
+
+
/* mgsl_allocate_device()
*
* Allocate and initialize a device instance structure
@@ -4322,6 +4342,7 @@
printk("Error can't allocate device instance data\n");
} else {
tty_port_init(&info->port);
+ info->port.ops = &mgsl_port_ops;
info->magic = MGSL_MAGIC;
INIT_WORK(&info->task, mgsl_bh_handler);
info->max_frame_size = 4096;
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 08911ed..39ccaba 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -3132,6 +3132,17 @@
return 0;
}
+static int carrier_raised(struct tty_port *port)
+{
+ unsigned long flags;
+ struct slgt_info *info = container_of(port, struct slgt_info, port);
+
+ spin_lock_irqsave(&info->lock,flags);
+ get_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ return (info->signals & SerialSignal_DCD) ? 1 : 0;
+}
+
/*
* block current process until the device is ready to open
*/
@@ -3143,12 +3154,14 @@
bool do_clocal = false;
bool extra_count = false;
unsigned long flags;
+ int cd;
+ struct tty_port *port = &info->port;
DBGINFO(("%s block_til_ready\n", tty->driver->name));
if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
/* nonblock mode is set or port is not enabled */
- info->port.flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -3157,21 +3170,21 @@
/* Wait for carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
- * this loop, info->port.count is dropped by one, so that
+ * this loop, port->count is dropped by one, so that
* close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&info->port.open_wait, &wait);
+ add_wait_queue(&port->open_wait, &wait);
spin_lock_irqsave(&info->lock, flags);
if (!tty_hung_up_p(filp)) {
extra_count = true;
- info->port.count--;
+ port->count--;
}
spin_unlock_irqrestore(&info->lock, flags);
- info->port.blocked_open++;
+ port->blocked_open++;
while (1) {
if ((tty->termios->c_cflag & CBAUD)) {
@@ -3183,20 +3196,16 @@
set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){
- retval = (info->port.flags & ASYNC_HUP_NOTIFY) ?
+ if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
+ retval = (port->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS;
break;
}
- spin_lock_irqsave(&info->lock,flags);
- get_signals(info);
- spin_unlock_irqrestore(&info->lock,flags);
+ cd = tty_port_carrier_raised(port);
- if (!(info->port.flags & ASYNC_CLOSING) &&
- (do_clocal || (info->signals & SerialSignal_DCD)) ) {
+ if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd ))
break;
- }
if (signal_pending(current)) {
retval = -ERESTARTSYS;
@@ -3208,14 +3217,14 @@
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->port.open_wait, &wait);
+ remove_wait_queue(&port->open_wait, &wait);
if (extra_count)
- info->port.count++;
- info->port.blocked_open--;
+ port->count++;
+ port->blocked_open--;
if (!retval)
- info->port.flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval));
return retval;
@@ -3444,6 +3453,10 @@
#endif
}
+static const struct tty_port_operations slgt_port_ops = {
+ .carrier_raised = carrier_raised,
+};
+
/*
* allocate device instance structure, return NULL on failure
*/
@@ -3458,6 +3471,7 @@
driver_name, adapter_num, port_num));
} else {
tty_port_init(&info->port);
+ info->port.ops = &slgt_port_ops;
info->magic = MGSL_MAGIC;
INIT_WORK(&info->task, bh_handler);
info->max_frame_size = 4096;
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index 6bdb44f..fcf1ec7 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -558,6 +558,7 @@
static int startup(SLMP_INFO *info);
static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info);
+static int carrier_raised(struct tty_port *port);
static void shutdown(SLMP_INFO *info);
static void program_hw(SLMP_INFO *info);
static void change_params(SLMP_INFO *info);
@@ -3318,7 +3319,17 @@
return 0;
}
+static int carrier_raised(struct tty_port *port)
+{
+ SLMP_INFO *info = container_of(port, SLMP_INFO, port);
+ unsigned long flags;
+ spin_lock_irqsave(&info->lock,flags);
+ get_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
+}
/* Block the current process until the specified port is ready to open.
*/
@@ -3330,6 +3341,8 @@
bool do_clocal = false;
bool extra_count = false;
unsigned long flags;
+ int cd;
+ struct tty_port *port = &info->port;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s block_til_ready()\n",
@@ -3338,7 +3351,7 @@
if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
/* nonblock mode is set or port is not enabled */
/* just verify that callout device is not active */
- info->port.flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -3347,25 +3360,25 @@
/* Wait for carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
- * this loop, info->port.count is dropped by one, so that
+ * this loop, port->count is dropped by one, so that
* close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&info->port.open_wait, &wait);
+ add_wait_queue(&port->open_wait, &wait);
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s block_til_ready() before block, count=%d\n",
- __FILE__,__LINE__, tty->driver->name, info->port.count );
+ __FILE__,__LINE__, tty->driver->name, port->count );
spin_lock_irqsave(&info->lock, flags);
if (!tty_hung_up_p(filp)) {
extra_count = true;
- info->port.count--;
+ port->count--;
}
spin_unlock_irqrestore(&info->lock, flags);
- info->port.blocked_open++;
+ port->blocked_open++;
while (1) {
if ((tty->termios->c_cflag & CBAUD)) {
@@ -3377,20 +3390,16 @@
set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){
- retval = (info->port.flags & ASYNC_HUP_NOTIFY) ?
+ if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
+ retval = (port->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS;
break;
}
- spin_lock_irqsave(&info->lock,flags);
- get_signals(info);
- spin_unlock_irqrestore(&info->lock,flags);
+ cd = tty_port_carrier_raised(port);
- if (!(info->port.flags & ASYNC_CLOSING) &&
- (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) {
+ if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd))
break;
- }
if (signal_pending(current)) {
retval = -ERESTARTSYS;
@@ -3399,24 +3408,24 @@
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s block_til_ready() count=%d\n",
- __FILE__,__LINE__, tty->driver->name, info->port.count );
+ __FILE__,__LINE__, tty->driver->name, port->count );
schedule();
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->port.open_wait, &wait);
+ remove_wait_queue(&port->open_wait, &wait);
if (extra_count)
- info->port.count++;
- info->port.blocked_open--;
+ port->count++;
+ port->blocked_open--;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s block_til_ready() after, count=%d\n",
- __FILE__,__LINE__, tty->driver->name, info->port.count );
+ __FILE__,__LINE__, tty->driver->name, port->count );
if (!retval)
- info->port.flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
return retval;
}
@@ -3782,6 +3791,10 @@
#endif
}
+static const struct tty_port_operations port_ops = {
+ .carrier_raised = carrier_raised,
+};
+
/* Allocate and initialize a device instance structure
*
* Return Value: pointer to SLMP_INFO if success, otherwise NULL
@@ -3798,6 +3811,7 @@
__FILE__,__LINE__, adapter_num, port_num);
} else {
tty_port_init(&info->port);
+ info->port.ops = &port_ops;
info->magic = MGSL_MAGIC;
INIT_WORK(&info->task, bh_handler);
info->max_frame_size = 4096;
@@ -3940,6 +3954,7 @@
.tiocmset = tiocmset,
};
+
static void synclinkmp_cleanup(void)
{
int rc;
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index c8f8024..f54e40c 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -94,3 +94,20 @@
spin_unlock_irqrestore(&port->lock, flags);
}
EXPORT_SYMBOL(tty_port_tty_set);
+
+/**
+ * tty_port_carrier_raised - carrier raised check
+ * @port: tty port
+ *
+ * Wrapper for the carrier detect logic. For the moment this is used
+ * to hide some internal details. This will eventually become entirely
+ * internal to the tty port.
+ */
+
+int tty_port_carrier_raised(struct tty_port *port)
+{
+ if (port->ops->carrier_raised == NULL)
+ return 1;
+ return port->ops->carrier_raised(port);
+}
+EXPORT_SYMBOL(tty_port_carrier_raised);
diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c
index 1718b3c..d4e1534 100644
--- a/drivers/char/vme_scc.c
+++ b/drivers/char/vme_scc.c
@@ -69,7 +69,7 @@
static void scc_enable_tx_interrupts(void * ptr);
static void scc_disable_rx_interrupts(void * ptr);
static void scc_enable_rx_interrupts(void * ptr);
-static int scc_get_CD(void * ptr);
+static int scc_carrier_raised(struct tty_port *port);
static void scc_shutdown_port(void * ptr);
static int scc_set_real_termios(void *ptr);
static void scc_hungup(void *ptr);
@@ -100,7 +100,6 @@
scc_enable_tx_interrupts,
scc_disable_rx_interrupts,
scc_enable_rx_interrupts,
- scc_get_CD,
scc_shutdown_port,
scc_set_real_termios,
scc_chars_in_buffer,
@@ -129,6 +128,10 @@
.break_ctl = scc_break_ctl,
};
+static const struct tty_port_operations scc_port_ops = {
+ .carrier_raised = scc_carrier_raised,
+};
+
/*----------------------------------------------------------------------------
* vme_scc_init() and support functions
*---------------------------------------------------------------------------*/
@@ -176,6 +179,8 @@
for (i = 0; i < 2; i++) {
port = scc_ports + i;
+ tty_port_init(&port->gs.port);
+ port->gs.port.ops = &scc_port_ops;
port->gs.magic = SCC_MAGIC;
port->gs.close_delay = HZ/2;
port->gs.closing_wait = 30 * HZ;
@@ -624,9 +629,9 @@
}
-static int scc_get_CD(void *ptr)
+static int scc_carrier_raised(struct tty_port *port)
{
- struct scc_port *port = ptr;
+ struct scc_port *scc = container_of(port, struct scc_port, gs.port);
unsigned channel = port->channel;
return !!(scc_last_status_reg[channel] & SR_DCD);
@@ -896,7 +901,7 @@
return retval;
}
- port->c_dcd = scc_get_CD (port);
+ port->c_dcd = tty_port_carrier_raised(&port->gs.port);
scc_enable_rx_interrupts(port);
diff --git a/include/linux/generic_serial.h b/include/linux/generic_serial.h
index 4cc9139..fadff28 100644
--- a/include/linux/generic_serial.h
+++ b/include/linux/generic_serial.h
@@ -21,7 +21,6 @@
void (*enable_tx_interrupts) (void *);
void (*disable_rx_interrupts) (void *);
void (*enable_rx_interrupts) (void *);
- int (*get_CD) (void *);
void (*shutdown_port) (void*);
int (*set_real_termios) (void*);
int (*chars_in_buffer) (void*);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index bbbeaef9..bc7bae7 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -180,8 +180,16 @@
* until a hangup so don't use the wrong path.
*/
+struct tty_port;
+
+struct tty_port_operations {
+ /* Return 1 if the carrier is raised */
+ int (*carrier_raised)(struct tty_port *port);
+};
+
struct tty_port {
struct tty_struct *tty; /* Back pointer */
+ const struct tty_port_operations *ops; /* Port operations */
spinlock_t lock; /* Lock protecting tty field */
int blocked_open; /* Waiting to open */
int count; /* Usage count */
@@ -427,6 +435,7 @@
extern void tty_port_free_xmit_buf(struct tty_port *port);
extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
+extern int tty_port_carrier_raised(struct tty_port *port);
extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
extern int tty_unregister_ldisc(int disc);