Merge branch 'gic/cleanup' into next/cleanup
* gic/cleanup:
irqchip: vic: add include of linux/irq.h
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2c3bdce..eaae82a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1596,6 +1596,7 @@
config HAVE_ARM_TWD
bool
depends on SMP
+ select CLKSRC_OF if OF
help
This options enables support for the ARM timer and watchdog unit
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 1ea9590..047f2a4 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -20,7 +20,7 @@
CONFIG_SOC_AT91SAM9G45=y
CONFIG_SOC_AT91SAM9X5=y
CONFIG_SOC_AT91SAM9N12=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_TIMER_HZ=128
CONFIG_AEABI=y
diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig
index 0ea5d2c..05618eb 100644
--- a/arch/arm/configs/at91sam9260_defconfig
+++ b/arch/arm/configs/at91sam9260_defconfig
@@ -22,7 +22,7 @@
CONFIG_MACH_CPU9260=y
CONFIG_MACH_FLEXIBITY=y
CONFIG_MACH_SNAPPER_9260=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig
index 3b18810..892e828 100644
--- a/arch/arm/configs/at91sam9g20_defconfig
+++ b/arch/arm/configs/at91sam9g20_defconfig
@@ -22,7 +22,7 @@
CONFIG_MACH_GSIA18S=y
CONFIG_MACH_USB_A9G20=y
CONFIG_MACH_SNAPPER_9260=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig
index 606d48f..5f551b7 100644
--- a/arch/arm/configs/at91sam9g45_defconfig
+++ b/arch/arm/configs/at91sam9g45_defconfig
@@ -18,7 +18,7 @@
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G45=y
CONFIG_MACH_AT91SAM9M10G45EK=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_SLOW_CLOCK=y
CONFIG_AEABI=y
diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h
index 0f01f46..7b2899c 100644
--- a/arch/arm/include/asm/smp_twd.h
+++ b/arch/arm/include/asm/smp_twd.h
@@ -34,12 +34,4 @@
int twd_local_timer_register(struct twd_local_timer *);
-#ifdef CONFIG_HAVE_ARM_TWD
-void twd_local_timer_of_register(void);
-#else
-static inline void twd_local_timer_of_register(void)
-{
-}
-#endif
-
#endif
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 8e4ef4c..9723d17 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -26,6 +26,7 @@
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/irqchip.h>
#include <linux/random.h>
#include <linux/smp.h>
#include <linux/init.h>
@@ -114,7 +115,10 @@
void __init init_IRQ(void)
{
- machine_desc->init_irq();
+ if (IS_ENABLED(CONFIG_OF) && !machine_desc->init_irq)
+ irqchip_init();
+ else
+ machine_desc->init_irq();
}
#ifdef CONFIG_MULTI_IRQ_HANDLER
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 3f25650..90525d9 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -362,25 +362,13 @@
}
#ifdef CONFIG_OF
-const static struct of_device_id twd_of_match[] __initconst = {
- { .compatible = "arm,cortex-a9-twd-timer", },
- { .compatible = "arm,cortex-a5-twd-timer", },
- { .compatible = "arm,arm11mp-twd-timer", },
- { },
-};
-
-void __init twd_local_timer_of_register(void)
+static void __init twd_local_timer_of_register(struct device_node *np)
{
- struct device_node *np;
int err;
if (!is_smp() || !setup_max_cpus)
return;
- np = of_find_matching_node(NULL, twd_of_match);
- if (!np)
- return;
-
twd_ppi = irq_of_parse_and_map(np, 0);
if (!twd_ppi) {
err = -EINVAL;
@@ -398,4 +386,7 @@
out:
WARN(err, "twd_local_timer_of_register failed (%d)\n", err);
}
+CLOCKSOURCE_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register);
+CLOCKSOURCE_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register);
+CLOCKSOURCE_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register);
#endif
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 6071f4c..440682b 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,8 +1,5 @@
if ARCH_AT91
-config HAVE_AT91_DATAFLASH_CARD
- bool
-
config HAVE_AT91_DBGU0
bool
@@ -93,394 +90,13 @@
help
Select this if you are using Atmel's AT91SAM9N12 SoC.
-choice
- prompt "Atmel AT91 Processor Devices for non DT boards"
-
-config ARCH_AT91_NONE
- bool "None"
-
-config ARCH_AT91RM9200
- bool "AT91RM9200"
- select SOC_AT91RM9200
-
-config ARCH_AT91SAM9260
- bool "AT91SAM9260 or AT91SAM9XE"
- select SOC_AT91SAM9260
-
-config ARCH_AT91SAM9261
- bool "AT91SAM9261"
- select SOC_AT91SAM9261
-
-config ARCH_AT91SAM9G10
- bool "AT91SAM9G10"
- select SOC_AT91SAM9261
-
-config ARCH_AT91SAM9263
- bool "AT91SAM9263"
- select SOC_AT91SAM9263
-
-config ARCH_AT91SAM9RL
- bool "AT91SAM9RL"
- select SOC_AT91SAM9RL
-
-config ARCH_AT91SAM9G20
- bool "AT91SAM9G20"
- select SOC_AT91SAM9260
-
-config ARCH_AT91SAM9G45
- bool "AT91SAM9G45"
- select SOC_AT91SAM9G45
-
-config ARCH_AT91X40
- bool "AT91x40"
- depends on !MMU
- select ARCH_USES_GETTIMEOFFSET
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
-
-endchoice
-
config AT91_PMC_UNIT
bool
default !ARCH_AT91X40
# ----------------------------------------------------------
-if ARCH_AT91RM9200
-
-comment "AT91RM9200 Board Type"
-
-config MACH_ONEARM
- bool "Ajeco 1ARM Single Board Computer"
- help
- Select this if you are using Ajeco's 1ARM Single Board Computer.
- <http://www.ajeco.fi/>
-
-config ARCH_AT91RM9200DK
- bool "Atmel AT91RM9200-DK Development board"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91RM9200-DK Development board.
- (Discontinued)
-
-config MACH_AT91RM9200EK
- bool "Atmel AT91RM9200-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
-
-config MACH_CSB337
- bool "Cogent CSB337"
- help
- Select this if you are using Cogent's CSB337 board.
- <http://www.cogcomp.com/csb_csb337.htm>
-
-config MACH_CSB637
- bool "Cogent CSB637"
- help
- Select this if you are using Cogent's CSB637 board.
- <http://www.cogcomp.com/csb_csb637.htm>
-
-config MACH_CARMEVA
- bool "Conitec ARM&EVA"
- help
- Select this if you are using Conitec's AT91RM9200-MCU-Module.
- <http://www.conitec.net/english/linuxboard.php>
-
-config MACH_ATEB9200
- bool "Embest ATEB9200"
- help
- Select this if you are using Embest's ATEB9200 board.
- <http://www.embedinfo.com/english/product/ATEB9200.asp>
-
-config MACH_KB9200
- bool "KwikByte KB920x"
- help
- Select this if you are using KwikByte's KB920x board.
- <http://www.kwikbyte.com/KB9202.html>
-
-config MACH_PICOTUX2XX
- bool "picotux 200"
- help
- Select this if you are using a picotux 200.
- <http://www.picotux.com/>
-
-config MACH_KAFA
- bool "Sperry-Sun KAFA board"
- help
- Select this if you are using Sperry-Sun's KAFA board.
-
-config MACH_ECBAT91
- bool "emQbit ECB_AT91 SBC"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using emQbit's ECB_AT91 board.
- <http://wiki.emqbit.com/free-ecb-at91>
-
-config MACH_YL9200
- bool "ucDragon YL-9200"
- help
- Select this if you are using the ucDragon YL-9200 board.
-
-config MACH_CPUAT91
- bool "Eukrea CPUAT91"
- help
- Select this if you are using the Eukrea Electromatique's
- CPUAT91 board <http://www.eukrea.com/>.
-
-config MACH_ECO920
- bool "eco920"
- help
- Select this if you are using the eco920 board
-
-config MACH_RSI_EWS
- bool "RSI Embedded Webserver"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using RSIs EWS board.
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9260
-
-comment "AT91SAM9260 Variants"
-
-comment "AT91SAM9260 / AT91SAM9XE Board Type"
-
-config MACH_AT91SAM9260EK
- bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-
-config MACH_CAM60
- bool "KwikByte KB9260 (CAM60) board"
- help
- Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
- <http://www.kwikbyte.com/KB9260.html>
-
-config MACH_SAM9_L9260
- bool "Olimex SAM9-L9260 board"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
- <http://www.olimex.com/dev/sam9-L9260.html>
-
-config MACH_AFEB9260
- bool "Custom afeb9260 board v1"
- help
- Select this if you are using custom afeb9260 board based on
- open hardware design. Select this for revision 1 of the board.
- <svn://194.85.238.22/home/users/george/svn/arm9eb>
- <http://groups.google.com/group/arm9fpga-evolution-board>
-
-config MACH_USB_A9260
- bool "CALAO USB-A9260"
- help
- Select this if you are using a Calao Systems USB-A9260.
- <http://www.calao-systems.com>
-
-config MACH_QIL_A9260
- bool "CALAO QIL-A9260 board"
- help
- Select this if you are using a Calao Systems QIL-A9260 Board.
- <http://www.calao-systems.com>
-
-config MACH_CPU9260
- bool "Eukrea CPU9260 board"
- help
- Select this if you are using a Eukrea Electromatique's
- CPU9260 Board <http://www.eukrea.com/>
-
-config MACH_FLEXIBITY
- bool "Flexibity Connect board"
- help
- Select this if you are using Flexibity Connect board
- <http://www.flexibity.com>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9261
-
-comment "AT91SAM9261 Board Type"
-
-config MACH_AT91SAM9261EK
- bool "Atmel AT91SAM9261-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G10
-
-comment "AT91SAM9G10 Board Type"
-
-config MACH_AT91SAM9G10EK
- bool "Atmel AT91SAM9G10-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9263
-
-comment "AT91SAM9263 Board Type"
-
-config MACH_AT91SAM9263EK
- bool "Atmel AT91SAM9263-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
-
-config MACH_USB_A9263
- bool "CALAO USB-A9263"
- help
- Select this if you are using a Calao Systems USB-A9263.
- <http://www.calao-systems.com>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9RL
-
-comment "AT91SAM9RL Board Type"
-
-config MACH_AT91SAM9RLEK
- bool "Atmel AT91SAM9RL-EK Evaluation Kit"
- help
- Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G20
-
-comment "AT91SAM9G20 Board Type"
-
-config MACH_AT91SAM9G20EK
- bool "Atmel AT91SAM9G20-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
- that embeds only one SD/MMC slot.
-
-config MACH_AT91SAM9G20EK_2MMC
- depends on MACH_AT91SAM9G20EK
- bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
- help
- Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
- with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
- onwards.
- <http://www.atmel.com/tools/SAM9G20-EK.aspx>
-
-config MACH_CPU9G20
- bool "Eukrea CPU9G20 board"
- help
- Select this if you are using a Eukrea Electromatique's
- CPU9G20 Board <http://www.eukrea.com/>
-
-config MACH_ACMENETUSFOXG20
- bool "Acme Systems srl FOX Board G20"
- help
- Select this if you are using Acme Systems
- FOX Board G20 <http://www.acmesystems.it>
-
-config MACH_PORTUXG20
- bool "taskit PortuxG20"
- help
- Select this if you are using taskit's PortuxG20.
- <http://www.taskit.de/en/>
-
-config MACH_STAMP9G20
- bool "taskit Stamp9G20 CPU module"
- help
- Select this if you are using taskit's Stamp9G20 CPU module on its
- evaluation board.
- <http://www.taskit.de/en/>
-
-config MACH_PCONTROL_G20
- bool "PControl G20 CPU module"
- help
- Select this if you are using taskit's Stamp9G20 CPU module on this
- carrier board, beeing the decentralized unit of a building automation
- system; featuring nvram, eth-switch, iso-rs485, display, io
-
-config MACH_GSIA18S
- bool "GS_IA18_S board"
- help
- This enables support for the GS_IA18_S board
- produced by GeoSIG Ltd company. This is an internet accelerograph.
- <http://www.geosig.com>
-
-config MACH_USB_A9G20
- bool "CALAO USB-A9G20"
- depends on ARCH_AT91SAM9G20
- help
- Select this if you are using a Calao Systems USB-A9G20.
- <http://www.calao-systems.com>
-
-endif
-
-if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
-comment "AT91SAM9260/AT91SAM9G20 boards"
-
-config MACH_SNAPPER_9260
- bool "Bluewater Systems Snapper 9260/9G20 module"
- help
- Select this if you are using the Bluewater Systems Snapper 9260 or
- Snapper 9G20 modules.
- <http://www.bluewatersys.com/>
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G45
-
-comment "AT91SAM9G45 Board Type"
-
-config MACH_AT91SAM9M10G45EK
- bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
- help
- Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
- Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
- families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
- <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91X40
-
-comment "AT91X40 Board Type"
-
-config MACH_AT91EB01
- bool "Atmel AT91EB01 Evaluation Kit"
- help
- Select this if you are using Atmel's AT91EB01 Evaluation Kit.
- It is also a popular target for simulators such as GDB's
- ARM simulator (commonly known as the ARMulator) and the
- Skyeye simulator.
-
-endif
-
-# ----------------------------------------------------------
+source arch/arm/mach-at91/Kconfig.non_dt
comment "Generic Board Type"
@@ -492,7 +108,7 @@
Select this if you want to experiment device-tree with
an Atmel RM9200 Evaluation Kit.
-config MACH_AT91SAM_DT
+config MACH_AT91SAM9_DT
bool "Atmel AT91SAM Evaluation Kits with device-tree support"
depends on SOC_AT91SAM9
select USE_OF
@@ -502,16 +118,6 @@
# ----------------------------------------------------------
-comment "AT91 Board Options"
-
-config MTD_AT91_DATAFLASH_CARD
- bool "Enable DataFlash Card support"
- depends on HAVE_AT91_DATAFLASH_CARD
- help
- Enable support for the DataFlash card.
-
-# ----------------------------------------------------------
-
comment "AT91 Feature Selections"
config AT91_PROGRAMMABLE_CLOCKS
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
new file mode 100644
index 0000000..6c24985
--- /dev/null
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -0,0 +1,399 @@
+menu "Atmel Non-DT world"
+
+config HAVE_AT91_DATAFLASH_CARD
+ bool
+
+choice
+ prompt "Atmel AT91 Processor Devices for non DT boards"
+
+config ARCH_AT91_NONE
+ bool "None"
+
+config ARCH_AT91RM9200
+ bool "AT91RM9200"
+ select SOC_AT91RM9200
+
+config ARCH_AT91SAM9260
+ bool "AT91SAM9260 or AT91SAM9XE"
+ select SOC_AT91SAM9260
+
+config ARCH_AT91SAM9261
+ bool "AT91SAM9261"
+ select SOC_AT91SAM9261
+
+config ARCH_AT91SAM9G10
+ bool "AT91SAM9G10"
+ select SOC_AT91SAM9261
+
+config ARCH_AT91SAM9263
+ bool "AT91SAM9263"
+ select SOC_AT91SAM9263
+
+config ARCH_AT91SAM9RL
+ bool "AT91SAM9RL"
+ select SOC_AT91SAM9RL
+
+config ARCH_AT91SAM9G20
+ bool "AT91SAM9G20"
+ select SOC_AT91SAM9260
+
+config ARCH_AT91SAM9G45
+ bool "AT91SAM9G45"
+ select SOC_AT91SAM9G45
+
+config ARCH_AT91X40
+ bool "AT91x40"
+ depends on !MMU
+ select ARCH_USES_GETTIMEOFFSET
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+
+endchoice
+
+# ----------------------------------------------------------
+
+if ARCH_AT91RM9200
+
+comment "AT91RM9200 Board Type"
+
+config MACH_ONEARM
+ bool "Ajeco 1ARM Single Board Computer"
+ help
+ Select this if you are using Ajeco's 1ARM Single Board Computer.
+ <http://www.ajeco.fi/>
+
+config ARCH_AT91RM9200DK
+ bool "Atmel AT91RM9200-DK Development board"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91RM9200-DK Development board.
+ (Discontinued)
+
+config MACH_AT91RM9200EK
+ bool "Atmel AT91RM9200-EK Evaluation Kit"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
+
+config MACH_CSB337
+ bool "Cogent CSB337"
+ help
+ Select this if you are using Cogent's CSB337 board.
+ <http://www.cogcomp.com/csb_csb337.htm>
+
+config MACH_CSB637
+ bool "Cogent CSB637"
+ help
+ Select this if you are using Cogent's CSB637 board.
+ <http://www.cogcomp.com/csb_csb637.htm>
+
+config MACH_CARMEVA
+ bool "Conitec ARM&EVA"
+ help
+ Select this if you are using Conitec's AT91RM9200-MCU-Module.
+ <http://www.conitec.net/english/linuxboard.php>
+
+config MACH_ATEB9200
+ bool "Embest ATEB9200"
+ help
+ Select this if you are using Embest's ATEB9200 board.
+ <http://www.embedinfo.com/english/product/ATEB9200.asp>
+
+config MACH_KB9200
+ bool "KwikByte KB920x"
+ help
+ Select this if you are using KwikByte's KB920x board.
+ <http://www.kwikbyte.com/KB9202.html>
+
+config MACH_PICOTUX2XX
+ bool "picotux 200"
+ help
+ Select this if you are using a picotux 200.
+ <http://www.picotux.com/>
+
+config MACH_KAFA
+ bool "Sperry-Sun KAFA board"
+ help
+ Select this if you are using Sperry-Sun's KAFA board.
+
+config MACH_ECBAT91
+ bool "emQbit ECB_AT91 SBC"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using emQbit's ECB_AT91 board.
+ <http://wiki.emqbit.com/free-ecb-at91>
+
+config MACH_YL9200
+ bool "ucDragon YL-9200"
+ help
+ Select this if you are using the ucDragon YL-9200 board.
+
+config MACH_CPUAT91
+ bool "Eukrea CPUAT91"
+ help
+ Select this if you are using the Eukrea Electromatique's
+ CPUAT91 board <http://www.eukrea.com/>.
+
+config MACH_ECO920
+ bool "eco920"
+ help
+ Select this if you are using the eco920 board
+
+config MACH_RSI_EWS
+ bool "RSI Embedded Webserver"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using RSIs EWS board.
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9260
+
+comment "AT91SAM9260 Variants"
+
+comment "AT91SAM9260 / AT91SAM9XE Board Type"
+
+config MACH_AT91SAM9260EK
+ bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+
+config MACH_CAM60
+ bool "KwikByte KB9260 (CAM60) board"
+ help
+ Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
+ <http://www.kwikbyte.com/KB9260.html>
+
+config MACH_SAM9_L9260
+ bool "Olimex SAM9-L9260 board"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
+ <http://www.olimex.com/dev/sam9-L9260.html>
+
+config MACH_AFEB9260
+ bool "Custom afeb9260 board v1"
+ help
+ Select this if you are using custom afeb9260 board based on
+ open hardware design. Select this for revision 1 of the board.
+ <svn://194.85.238.22/home/users/george/svn/arm9eb>
+ <http://groups.google.com/group/arm9fpga-evolution-board>
+
+config MACH_USB_A9260
+ bool "CALAO USB-A9260"
+ help
+ Select this if you are using a Calao Systems USB-A9260.
+ <http://www.calao-systems.com>
+
+config MACH_QIL_A9260
+ bool "CALAO QIL-A9260 board"
+ help
+ Select this if you are using a Calao Systems QIL-A9260 Board.
+ <http://www.calao-systems.com>
+
+config MACH_CPU9260
+ bool "Eukrea CPU9260 board"
+ help
+ Select this if you are using a Eukrea Electromatique's
+ CPU9260 Board <http://www.eukrea.com/>
+
+config MACH_FLEXIBITY
+ bool "Flexibity Connect board"
+ help
+ Select this if you are using Flexibity Connect board
+ <http://www.flexibity.com>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+config MACH_AT91SAM9261EK
+ bool "Atmel AT91SAM9261-EK Evaluation Kit"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G10
+
+comment "AT91SAM9G10 Board Type"
+
+config MACH_AT91SAM9G10EK
+ bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9263
+
+comment "AT91SAM9263 Board Type"
+
+config MACH_AT91SAM9263EK
+ bool "Atmel AT91SAM9263-EK Evaluation Kit"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+
+config MACH_USB_A9263
+ bool "CALAO USB-A9263"
+ help
+ Select this if you are using a Calao Systems USB-A9263.
+ <http://www.calao-systems.com>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9RL
+
+comment "AT91SAM9RL Board Type"
+
+config MACH_AT91SAM9RLEK
+ bool "Atmel AT91SAM9RL-EK Evaluation Kit"
+ help
+ Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G20
+
+comment "AT91SAM9G20 Board Type"
+
+config MACH_AT91SAM9G20EK
+ bool "Atmel AT91SAM9G20-EK Evaluation Kit"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
+ that embeds only one SD/MMC slot.
+
+config MACH_AT91SAM9G20EK_2MMC
+ depends on MACH_AT91SAM9G20EK
+ bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
+ help
+ Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+ with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
+ onwards.
+ <http://www.atmel.com/tools/SAM9G20-EK.aspx>
+
+config MACH_CPU9G20
+ bool "Eukrea CPU9G20 board"
+ help
+ Select this if you are using a Eukrea Electromatique's
+ CPU9G20 Board <http://www.eukrea.com/>
+
+config MACH_ACMENETUSFOXG20
+ bool "Acme Systems srl FOX Board G20"
+ help
+ Select this if you are using Acme Systems
+ FOX Board G20 <http://www.acmesystems.it>
+
+config MACH_PORTUXG20
+ bool "taskit PortuxG20"
+ help
+ Select this if you are using taskit's PortuxG20.
+ <http://www.taskit.de/en/>
+
+config MACH_STAMP9G20
+ bool "taskit Stamp9G20 CPU module"
+ help
+ Select this if you are using taskit's Stamp9G20 CPU module on its
+ evaluation board.
+ <http://www.taskit.de/en/>
+
+config MACH_PCONTROL_G20
+ bool "PControl G20 CPU module"
+ help
+ Select this if you are using taskit's Stamp9G20 CPU module on this
+ carrier board, beeing the decentralized unit of a building automation
+ system; featuring nvram, eth-switch, iso-rs485, display, io
+
+config MACH_GSIA18S
+ bool "GS_IA18_S board"
+ help
+ This enables support for the GS_IA18_S board
+ produced by GeoSIG Ltd company. This is an internet accelerograph.
+ <http://www.geosig.com>
+
+config MACH_USB_A9G20
+ bool "CALAO USB-A9G20"
+ depends on ARCH_AT91SAM9G20
+ help
+ Select this if you are using a Calao Systems USB-A9G20.
+ <http://www.calao-systems.com>
+
+endif
+
+if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+comment "AT91SAM9260/AT91SAM9G20 boards"
+
+config MACH_SNAPPER_9260
+ bool "Bluewater Systems Snapper 9260/9G20 module"
+ help
+ Select this if you are using the Bluewater Systems Snapper 9260 or
+ Snapper 9G20 modules.
+ <http://www.bluewatersys.com/>
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G45
+
+comment "AT91SAM9G45 Board Type"
+
+config MACH_AT91SAM9M10G45EK
+ bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
+ help
+ Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
+ Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
+ families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
+ <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91X40
+
+comment "AT91X40 Board Type"
+
+config MACH_AT91EB01
+ bool "Atmel AT91EB01 Evaluation Kit"
+ help
+ Select this if you are using Atmel's AT91EB01 Evaluation Kit.
+ It is also a popular target for simulators such as GDB's
+ ARM simulator (commonly known as the ARMulator) and the
+ Skyeye simulator.
+
+endif
+
+# ----------------------------------------------------------
+
+comment "AT91 Board Options"
+
+config MTD_AT91_DATAFLASH_CARD
+ bool "Enable DataFlash Card support"
+ depends on HAVE_AT91_DATAFLASH_CARD
+ help
+ Enable support for the DataFlash card.
+
+endmenu
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 39218ca..505fed9 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -87,8 +87,8 @@
obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
# AT91SAM board with device-tree
-obj-$(CONFIG_MACH_AT91RM9200_DT) += board-rm9200-dt.o
-obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
+obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
+obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
# AT91X40 board-specific support
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
diff --git a/arch/arm/mach-at91/board-rm9200-dt.c b/arch/arm/mach-at91/board-dt-rm9200.c
similarity index 100%
rename from arch/arm/mach-at91/board-rm9200-dt.c
rename to arch/arm/mach-at91/board-dt-rm9200.c
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt-sam9.c
similarity index 100%
rename from arch/arm/mach-at91/board-dt.c
rename to arch/arm/mach-at91/board-dt-sam9.c
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 4b67847..6b4608d 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -333,7 +333,7 @@
of_id = of_match_node(rstc_ids, np);
if (!of_id)
- panic("AT91: rtsc no restart function availlable\n");
+ panic("AT91: rtsc no restart function available\n");
arm_pm_restart = of_id->data;
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index a4f9f50..76c1170 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -32,7 +32,6 @@
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#include <asm/smp_plat.h>
-#include <asm/smp_twd.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/timer-sp.h>
#include <asm/hardware/cache-l2x0.h>
@@ -119,10 +118,10 @@
sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1");
sp804_clockevents_init(timer_base, irq, "timer0");
- twd_local_timer_of_register();
-
arch_timer_of_register();
arch_timer_sched_clock_init();
+
+ clocksource_of_init();
}
static void highbank_power_off(void)
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 9ffd103..b59ddcb 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -12,6 +12,7 @@
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/clocksource.h>
#include <linux/cpu.h>
#include <linux/delay.h>
#include <linux/export.h>
@@ -28,11 +29,9 @@
#include <linux/regmap.h>
#include <linux/micrel_phy.h>
#include <linux/mfd/syscon.h>
-#include <asm/smp_twd.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/time.h>
#include <asm/system_misc.h>
#include "common.h"
@@ -292,7 +291,7 @@
static void __init imx6q_timer_init(void)
{
mx6q_clocks_init();
- twd_local_timer_of_register();
+ clocksource_of_init();
imx_print_silicon_rev("i.MX6Q", imx6q_revision());
}
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 2bdd4cf..4fd8025 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -597,7 +597,7 @@
int err;
if (of_have_populated_dt()) {
- twd_local_timer_of_register();
+ clocksource_of_init();
return;
}
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index d9c7c3b..973db98 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -402,8 +402,9 @@
orion5x_pci_hw_wr_conf(bus_nr, 0, func, reg, 4, val | 0x7);
}
-static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
+static void __init orion5x_setup_pci_wins(void)
{
+ const struct mbus_dram_target_info *dram = mv_mbus_dram_info();
u32 win_enable;
int bus;
int i;
@@ -420,7 +421,7 @@
bus = orion5x_pci_local_bus_nr();
for (i = 0; i < dram->num_cs; i++) {
- struct mbus_dram_window *cs = dram->cs + i;
+ const struct mbus_dram_window *cs = dram->cs + i;
u32 func = PCI_CONF_FUNC_BAR_CS(cs->cs_index);
u32 reg;
u32 val;
@@ -467,7 +468,7 @@
/*
* Point PCI unit MBUS decode windows to DRAM space.
*/
- orion5x_setup_pci_wins(&orion_mbus_dram_info);
+ orion5x_setup_pci_wins();
/*
* Master + Slave enable
diff --git a/arch/arm/mach-s3c24xx/bast-irq.c b/arch/arm/mach-s3c24xx/bast-irq.c
index c0daa95..cb1b791 100644
--- a/arch/arm/mach-s3c24xx/bast-irq.c
+++ b/arch/arm/mach-s3c24xx/bast-irq.c
@@ -34,8 +34,6 @@
#include <mach/hardware.h>
#include <mach/regs-irq.h>
-#include <plat/irq.h>
-
#include "bast.h"
#define irqdbf(x...)
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
index 641266f3..34fffdf 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c
@@ -40,7 +40,6 @@
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c2410.h>
#include <plat/clock.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c
index d10b695..2cc017d 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c
@@ -41,7 +41,6 @@
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c2412.h>
#include <plat/clock.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
index 14a81c2..036056ce 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c
@@ -14,7 +14,6 @@
#include <linux/init.h>
#include <linux/clk.h>
-#include <plat/s3c2416.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
index bdaba59..0a53051 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c
@@ -41,7 +41,6 @@
#include <plat/cpu-freq.h>
-#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
index 3b2cf6d..404444d 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -41,11 +41,12 @@
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/common-smdk.h>
#include <plat/gpio-cfg.h>
#include <plat/devs.h>
#include <plat/pm.h>
+#include "common-smdk.h"
+
/* LED devices */
static struct s3c24xx_led_platdata smdk_pdata_led4 = {
diff --git a/arch/arm/plat-samsung/include/plat/common-smdk.h b/arch/arm/mach-s3c24xx/common-smdk.h
similarity index 86%
rename from arch/arm/plat-samsung/include/plat/common-smdk.h
rename to arch/arm/mach-s3c24xx/common-smdk.h
index ba028f1..98f733e 100644
--- a/arch/arm/plat-samsung/include/plat/common-smdk.h
+++ b/arch/arm/mach-s3c24xx/common-smdk.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-samsung/include/plat/common-smdk.h
- *
+/*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 6bcf87f..d97533d 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -47,14 +47,11 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
-#include <plat/s3c2416.h>
-#include <plat/s3c244x.h>
-#include <plat/s3c2443.h>
#include <plat/cpu-freq.h>
#include <plat/pll.h>
+#include "common.h"
+
/* table of supported CPUs */
static const char name_s3c2410[] = "S3C2410";
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index ed6276f..8a2b413 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -12,8 +12,94 @@
#ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H
#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__
-void s3c2410_restart(char mode, const char *cmd);
-void s3c244x_restart(char mode, const char *cmd);
+struct s3c2410_uartcfg;
+
+#ifdef CONFIG_CPU_S3C2410
+extern int s3c2410_init(void);
+extern int s3c2410a_init(void);
+extern void s3c2410_map_io(void);
+extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2410_init_clocks(int xtal);
+extern void s3c2410_restart(char mode, const char *cmd);
+#else
+#define s3c2410_init_clocks NULL
+#define s3c2410_init_uarts NULL
+#define s3c2410_map_io NULL
+#define s3c2410_init NULL
+#define s3c2410a_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+extern int s3c2412_init(void);
+extern void s3c2412_map_io(void);
+extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2412_init_clocks(int xtal);
+extern int s3c2412_baseclk_add(void);
+extern void s3c2412_restart(char mode, const char *cmd);
+#else
+#define s3c2412_init_clocks NULL
+#define s3c2412_init_uarts NULL
+#define s3c2412_map_io NULL
+#define s3c2412_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2416
+extern int s3c2416_init(void);
+extern void s3c2416_map_io(void);
+extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2416_init_clocks(int xtal);
+extern int s3c2416_baseclk_add(void);
+extern void s3c2416_restart(char mode, const char *cmd);
+extern void s3c2416_init_irq(void);
+
+extern struct syscore_ops s3c2416_irq_syscore_ops;
+#else
+#define s3c2416_init_clocks NULL
+#define s3c2416_init_uarts NULL
+#define s3c2416_map_io NULL
+#define s3c2416_init NULL
+#endif
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+extern void s3c244x_map_io(void);
+extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c244x_init_clocks(int xtal);
+extern void s3c244x_restart(char mode, const char *cmd);
+#else
+#define s3c244x_init_clocks NULL
+#define s3c244x_init_uarts NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2440
+extern int s3c2440_init(void);
+extern void s3c2440_map_io(void);
+#else
+#define s3c2440_init NULL
+#define s3c2440_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+extern int s3c2442_init(void);
+extern void s3c2442_map_io(void);
+#else
+#define s3c2442_init NULL
+#define s3c2442_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+extern int s3c2443_init(void);
+extern void s3c2443_map_io(void);
+extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2443_init_clocks(int xtal);
+extern int s3c2443_baseclk_add(void);
+extern void s3c2443_restart(char mode, const char *cmd);
+extern void s3c2443_init_irq(void);
+#else
+#define s3c2443_init_clocks NULL
+#define s3c2443_init_uarts NULL
+#define s3c2443_map_io NULL
+#define s3c2443_init NULL
+#endif
extern struct syscore_ops s3c24xx_irq_syscore_ops;
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c
index 25d085a..a6c94b8 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c
@@ -28,7 +28,6 @@
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c
index d2408ba..c0e8c3f 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c
@@ -28,7 +28,6 @@
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c
index 0b86e74..1c08eccd 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c
@@ -28,7 +28,6 @@
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c
index 0553625..000e4c6 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c
@@ -28,7 +28,6 @@
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h b/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h
deleted file mode 100644
index cbf2d88..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 MMC/SDIO register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_SDI
-#define __ASM_ARM_REGS_SDI "regs-sdi.h"
-
-#define S3C2410_SDICON (0x00)
-#define S3C2410_SDIPRE (0x04)
-#define S3C2410_SDICMDARG (0x08)
-#define S3C2410_SDICMDCON (0x0C)
-#define S3C2410_SDICMDSTAT (0x10)
-#define S3C2410_SDIRSP0 (0x14)
-#define S3C2410_SDIRSP1 (0x18)
-#define S3C2410_SDIRSP2 (0x1C)
-#define S3C2410_SDIRSP3 (0x20)
-#define S3C2410_SDITIMER (0x24)
-#define S3C2410_SDIBSIZE (0x28)
-#define S3C2410_SDIDCON (0x2C)
-#define S3C2410_SDIDCNT (0x30)
-#define S3C2410_SDIDSTA (0x34)
-#define S3C2410_SDIFSTA (0x38)
-
-#define S3C2410_SDIDATA (0x3C)
-#define S3C2410_SDIIMSK (0x40)
-
-#define S3C2440_SDIDATA (0x40)
-#define S3C2440_SDIIMSK (0x3C)
-
-#define S3C2440_SDICON_SDRESET (1<<8)
-#define S3C2440_SDICON_MMCCLOCK (1<<5)
-#define S3C2410_SDICON_BYTEORDER (1<<4)
-#define S3C2410_SDICON_SDIOIRQ (1<<3)
-#define S3C2410_SDICON_RWAITEN (1<<2)
-#define S3C2410_SDICON_FIFORESET (1<<1)
-#define S3C2410_SDICON_CLOCKTYPE (1<<0)
-
-#define S3C2410_SDICMDCON_ABORT (1<<12)
-#define S3C2410_SDICMDCON_WITHDATA (1<<11)
-#define S3C2410_SDICMDCON_LONGRSP (1<<10)
-#define S3C2410_SDICMDCON_WAITRSP (1<<9)
-#define S3C2410_SDICMDCON_CMDSTART (1<<8)
-#define S3C2410_SDICMDCON_SENDERHOST (1<<6)
-#define S3C2410_SDICMDCON_INDEX (0x3f)
-
-#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12)
-#define S3C2410_SDICMDSTAT_CMDSENT (1<<11)
-#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
-#define S3C2410_SDICMDSTAT_RSPFIN (1<<9)
-#define S3C2410_SDICMDSTAT_XFERING (1<<8)
-#define S3C2410_SDICMDSTAT_INDEX (0xff)
-
-#define S3C2440_SDIDCON_DS_BYTE (0<<22)
-#define S3C2440_SDIDCON_DS_HALFWORD (1<<22)
-#define S3C2440_SDIDCON_DS_WORD (2<<22)
-#define S3C2410_SDIDCON_IRQPERIOD (1<<21)
-#define S3C2410_SDIDCON_TXAFTERRESP (1<<20)
-#define S3C2410_SDIDCON_RXAFTERCMD (1<<19)
-#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18)
-#define S3C2410_SDIDCON_BLOCKMODE (1<<17)
-#define S3C2410_SDIDCON_WIDEBUS (1<<16)
-#define S3C2410_SDIDCON_DMAEN (1<<15)
-#define S3C2410_SDIDCON_STOP (1<<14)
-#define S3C2440_SDIDCON_DATSTART (1<<14)
-#define S3C2410_SDIDCON_DATMODE (3<<12)
-#define S3C2410_SDIDCON_BLKNUM (0x7ff)
-
-/* constants for S3C2410_SDIDCON_DATMODE */
-#define S3C2410_SDIDCON_XFER_READY (0<<12)
-#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
-#define S3C2410_SDIDCON_XFER_RXSTART (2<<12)
-#define S3C2410_SDIDCON_XFER_TXSTART (3<<12)
-
-#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF)
-#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12)
-
-#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10)
-#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
-#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */
-#define S3C2410_SDIDSTA_CRCFAIL (1<<7)
-#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6)
-#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5)
-#define S3C2410_SDIDSTA_XFERFINISH (1<<4)
-#define S3C2410_SDIDSTA_BUSYFINISH (1<<3)
-#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */
-#define S3C2410_SDIDSTA_TXDATAON (1<<1)
-#define S3C2410_SDIDSTA_RXDATAON (1<<0)
-
-#define S3C2440_SDIFSTA_FIFORESET (1<<16)
-#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */
-#define S3C2410_SDIFSTA_TFDET (1<<13)
-#define S3C2410_SDIFSTA_RFDET (1<<12)
-#define S3C2410_SDIFSTA_TFHALF (1<<11)
-#define S3C2410_SDIFSTA_TFEMPTY (1<<10)
-#define S3C2410_SDIFSTA_RFLAST (1<<9)
-#define S3C2410_SDIFSTA_RFFULL (1<<8)
-#define S3C2410_SDIFSTA_RFHALF (1<<7)
-#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
-
-#define S3C2410_SDIIMSK_RESPONSECRC (1<<17)
-#define S3C2410_SDIIMSK_CMDSENT (1<<16)
-#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15)
-#define S3C2410_SDIIMSK_RESPONSEND (1<<14)
-#define S3C2410_SDIIMSK_READWAIT (1<<13)
-#define S3C2410_SDIIMSK_SDIOIRQ (1<<12)
-#define S3C2410_SDIIMSK_FIFOFAIL (1<<11)
-#define S3C2410_SDIIMSK_CRCSTATUS (1<<10)
-#define S3C2410_SDIIMSK_DATACRC (1<<9)
-#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8)
-#define S3C2410_SDIIMSK_DATAFINISH (1<<7)
-#define S3C2410_SDIIMSK_BUSYFINISH (1<<6)
-#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */
-#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4)
-#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3)
-#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2)
-#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1)
-#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0)
-
-#endif /* __ASM_ARM_REGS_SDI */
diff --git a/arch/arm/mach-s3c24xx/irq-pm.c b/arch/arm/mach-s3c24xx/irq-pm.c
index e119959..b91341e 100644
--- a/arch/arm/mach-s3c24xx/irq-pm.c
+++ b/arch/arm/mach-s3c24xx/irq-pm.c
@@ -16,10 +16,15 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/syscore_ops.h>
+#include <linux/io.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/irq.h>
+#include <plat/map-base.h>
+#include <plat/map-s3c.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
#include <asm/irq.h>
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index b6fac28..05be3e2 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -35,7 +35,6 @@
#include <plat/cpu.h>
#include <plat/regs-irqtype.h>
#include <plat/pm.h>
-#include <plat/irq.h>
#define S3C_IRQTYPE_NONE 0
#define S3C_IRQTYPE_EINT 1
@@ -176,8 +175,7 @@
return 0;
}
-/* FIXME: make static when it's out of plat-samsung/irq.h */
-int s3c_irqext_type(struct irq_data *data, unsigned int type)
+static int s3c_irqext_type(struct irq_data *data, unsigned int type)
{
void __iomem *extint_reg;
void __iomem *gpcon_reg;
@@ -225,7 +223,7 @@
extint_offset, type);
}
-struct irq_chip s3c_irq_chip = {
+static struct irq_chip s3c_irq_chip = {
.name = "s3c",
.irq_ack = s3c_irq_ack,
.irq_mask = s3c_irq_mask,
@@ -233,7 +231,7 @@
.irq_set_wake = s3c_irq_wake
};
-struct irq_chip s3c_irq_level_chip = {
+static struct irq_chip s3c_irq_level_chip = {
.name = "s3c-level",
.irq_mask = s3c_irq_mask,
.irq_unmask = s3c_irq_unmask,
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 54e83c1..ca08d7d 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -46,7 +46,6 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/s3c2412.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
@@ -54,6 +53,7 @@
#include <plat/pm.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
+#include "common.h"
#include "s3c2412-power.h"
static struct map_desc jive_iodesc[] __initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index d9d04b2..8017c0fc 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -48,7 +48,6 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <linux/platform_data/mmc-s3cmci.h>
-#include <plat/s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index a454e24..144b9f80 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -41,8 +41,6 @@
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index 40a47d6..deb0ace 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -33,7 +33,6 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/regs-serial.h>
-#include <plat/s3c2410.h>
#include "common.h"
#include "otom.h"
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 56175f0..84c5416 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -55,13 +55,13 @@
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/common-smdk.h>
#include <plat/gpio-cfg.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include "common.h"
+#include "common-smdk.h"
static struct map_desc qt2410_iodesc[] __initdata = {
{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index e184bfa..cd0b163 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -52,9 +52,8 @@
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/common-smdk.h>
-
#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2410_iodesc[] __initdata = {
/* nothing here yet */
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index 86d7847..7948590 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -41,13 +41,12 @@
#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/fb.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/common-smdk.h>
+#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2413_iodesc[] __initdata = {
};
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index ebb2e61..037a5da 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -42,7 +42,6 @@
#include <linux/platform_data/leds-s3c24xx.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s3c2416.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
@@ -54,7 +53,8 @@
#include <plat/fb.h>
-#include <plat/common-smdk.h>
+#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2416_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index 08cc38c..29d3131 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -38,15 +38,12 @@
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/common-smdk.h>
-
#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2440_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index fc65d74..b3be4c4 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -38,13 +38,12 @@
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/common-smdk.h>
+#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2443_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index 3e2bfdd..239129c 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -41,12 +41,11 @@
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include "common.h"
static struct map_desc vstms_iodesc[] __initdata = {
};
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c
index 668a78a..4c4bc1c 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c
@@ -29,7 +29,6 @@
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/s3c2412.h>
#include "regs-dsc.h"
#include "s3c2412-power.h"
diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c
index 9ebef95..d850ea5 100644
--- a/arch/arm/mach-s3c24xx/s3c2410.c
+++ b/arch/arm/mach-s3c24xx/s3c2410.c
@@ -37,7 +37,6 @@
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
-#include <plat/s3c2410.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c
index 0d59215..0f864d4 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c24xx/s3c2412.c
@@ -44,7 +44,6 @@
#include <plat/pm.h>
#include <plat/regs-serial.h>
#include <plat/regs-spi.h>
-#include <plat/s3c2412.h>
#include "common.h"
#include "regs-dsc.h"
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index e30476d..b9c5d38 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -50,7 +50,6 @@
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
-#include <plat/s3c2416.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/sdhci.h>
diff --git a/arch/arm/mach-s3c24xx/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c
index 559e394..5f9d656 100644
--- a/arch/arm/mach-s3c24xx/s3c2440.c
+++ b/arch/arm/mach-s3c24xx/s3c2440.c
@@ -33,7 +33,6 @@
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/s3c244x.h>
#include <plat/pm.h>
#include <plat/gpio-core.h>
diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c
index f732826..6819961 100644
--- a/arch/arm/mach-s3c24xx/s3c2442.c
+++ b/arch/arm/mach-s3c24xx/s3c2442.c
@@ -44,7 +44,6 @@
#include <plat/clock.h>
#include <plat/cpu.h>
-#include <plat/s3c244x.h>
#include <plat/pm.h>
#include <plat/gpio-core.h>
diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c
index 165b6a6..8328cd6 100644
--- a/arch/arm/mach-s3c24xx/s3c2443.c
+++ b/arch/arm/mach-s3c24xx/s3c2443.c
@@ -36,7 +36,6 @@
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
-#include <plat/s3c2443.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb-core.h>
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index ad2671b..2a35edb 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -37,8 +37,6 @@
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s5pc100/common.h b/arch/arm/mach-s5pc100/common.h
index 9fbd3ae..c41f912 100644
--- a/arch/arm/mach-s5pc100/common.h
+++ b/arch/arm/mach-s5pc100/common.h
@@ -20,18 +20,9 @@
void s5pc100_restart(char mode, const char *cmd);
-#ifdef CONFIG_CPU_S5PC100
-
extern int s5pc100_init(void);
extern void s5pc100_map_io(void);
extern void s5pc100_init_clocks(int xtal);
extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-#else
-#define s5pc100_init_clocks NULL
-#define s5pc100_init_uarts NULL
-#define s5pc100_map_io NULL
-#define s5pc100_init NULL
-#endif
-
#endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */
diff --git a/arch/arm/mach-s5pv210/common.h b/arch/arm/mach-s5pv210/common.h
index 6ed2af5..0a1cc0ae 100644
--- a/arch/arm/mach-s5pv210/common.h
+++ b/arch/arm/mach-s5pv210/common.h
@@ -20,18 +20,9 @@
void s5pv210_restart(char mode, const char *cmd);
-#ifdef CONFIG_CPU_S5PV210
-
extern int s5pv210_init(void);
extern void s5pv210_map_io(void);
extern void s5pv210_init_clocks(int xtal);
extern void s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-#else
-#define s5pv210_init_clocks NULL
-#define s5pv210_init_uarts NULL
-#define s5pv210_map_io NULL
-#define s5pv210_init NULL
-#endif
-
#endif /* __ARCH_ARM_MACH_S5PV210_COMMON_H */
diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c
index c7d2b4a..25a1019 100644
--- a/arch/arm/mach-spear13xx/spear13xx.c
+++ b/arch/arm/mach-spear13xx/spear13xx.c
@@ -15,12 +15,12 @@
#include <linux/amba/pl022.h>
#include <linux/clk.h>
+#include <linux/clocksource.h>
#include <linux/dw_dmac.h>
#include <linux/err.h>
#include <linux/of.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
-#include <asm/smp_twd.h>
#include <mach/dma.h>
#include <mach/generic.h>
#include <mach/spear.h>
@@ -179,5 +179,5 @@
clk_put(pclk);
spear_setup_of_timer();
- twd_local_timer_of_register();
+ clocksource_of_init();
}
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index a6af0b8..d07bbe7 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -7,6 +7,7 @@
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/clksrc-dbx500-prcmu.h>
+#include <linux/clocksource.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_data/clocksource-nomadik-mtu.h>
@@ -32,7 +33,7 @@
twd_local_timer = &u8500_twd_local_timer;
if (of_have_populated_dt())
- twd_local_timer_of_register();
+ clocksource_of_init();
else {
err = twd_local_timer_register(twd_local_timer);
if (err)
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 915683c..d0ad789 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -5,6 +5,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
+#include <linux/clocksource.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/irqchip.h>
@@ -25,7 +26,6 @@
#include <asm/arch_timer.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
-#include <asm/smp_twd.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
@@ -435,6 +435,7 @@
vexpress_clk_of_init();
+ clocksource_of_init();
do {
node = of_find_compatible_node(node, NULL, "arm,sp804");
} while (node && vexpress_get_site_by_node(node) != VEXPRESS_SITE_MB);
@@ -445,8 +446,7 @@
irq_of_parse_and_map(node, 0));
}
- if (arch_timer_of_register() != 0)
- twd_local_timer_of_register();
+ arch_timer_of_register();
if (arch_timer_sched_clock_init() != 0)
versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),
diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile
index a82cecb..ad97400 100644
--- a/arch/arm/plat-orion/Makefile
+++ b/arch/arm/plat-orion/Makefile
@@ -3,7 +3,11 @@
#
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-obj-y += addr-map.o
+obj-$(CONFIG_ARCH_MVEBU) += addr-map.o
+obj-$(CONFIG_ARCH_KIRKWOOD) += addr-map.o
+obj-$(CONFIG_ARCH_DOVE) += addr-map.o
+obj-$(CONFIG_ARCH_ORION5X) += addr-map.o
+obj-$(CONFIG_ARCH_MV78XX0) += addr-map.o
orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index f20a321..8b8c06d 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -120,12 +120,14 @@
* BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
* WIN[0-3] -> DRAM bank[0-3]
*/
-static void __init orion_pcie_setup_wins(void __iomem *base,
- struct mbus_dram_target_info *dram)
+static void __init orion_pcie_setup_wins(void __iomem *base)
{
+ const struct mbus_dram_target_info *dram;
u32 size;
int i;
+ dram = mv_mbus_dram_info();
+
/*
* First, disable and clear BARs and windows.
*/
@@ -150,7 +152,7 @@
*/
size = 0;
for (i = 0; i < dram->num_cs; i++) {
- struct mbus_dram_window *cs = dram->cs + i;
+ const struct mbus_dram_window *cs = dram->cs + i;
writel(cs->base & 0xffff0000, base + PCIE_WIN04_BASE_OFF(i));
writel(0, base + PCIE_WIN04_REMAP_OFF(i));
@@ -184,7 +186,7 @@
/*
* Point PCIe unit MBUS decode windows to DRAM space.
*/
- orion_pcie_setup_wins(base, &orion_mbus_dram_info);
+ orion_pcie_setup_wins(base);
/*
* Master + slave enable.
diff --git a/arch/arm/plat-samsung/include/plat/irq.h b/arch/arm/plat-samsung/include/plat/irq.h
deleted file mode 100644
index e21a89b..0000000
--- a/arch/arm/plat-samsung/include/plat/irq.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/irq.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-#define EXTINT_OFF (IRQ_EINT4 - 4)
-
-/* these are exported for arch/arm/mach-* usage */
-extern struct irq_chip s3c_irq_level_chip;
-extern struct irq_chip s3c_irq_chip;
-
-static inline void s3c_irqsub_mask(unsigned int irqno,
- unsigned int parentbit,
- int subcheck)
-{
- unsigned long mask;
- unsigned long submask;
-
- submask = __raw_readl(S3C2410_INTSUBMSK);
- mask = __raw_readl(S3C2410_INTMSK);
-
- submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
-
- /* check to see if we need to mask the parent IRQ */
-
- if ((submask & subcheck) == subcheck)
- __raw_writel(mask | parentbit, S3C2410_INTMSK);
-
- /* write back masks */
- __raw_writel(submask, S3C2410_INTSUBMSK);
-
-}
-
-static inline void s3c_irqsub_unmask(unsigned int irqno,
- unsigned int parentbit)
-{
- unsigned long mask;
- unsigned long submask;
-
- submask = __raw_readl(S3C2410_INTSUBMSK);
- mask = __raw_readl(S3C2410_INTMSK);
-
- submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
- mask &= ~parentbit;
-
- /* write back masks */
- __raw_writel(submask, S3C2410_INTSUBMSK);
- __raw_writel(mask, S3C2410_INTMSK);
-}
-
-
-static inline void s3c_irqsub_maskack(unsigned int irqno,
- unsigned int parentmask,
- unsigned int group)
-{
- unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
- s3c_irqsub_mask(irqno, parentmask, group);
-
- __raw_writel(bit, S3C2410_SUBSRCPND);
-
- /* only ack parent if we've got all the irqs (seems we must
- * ack, all and hope that the irq system retriggers ok when
- * the interrupt goes off again)
- */
-
- if (1) {
- __raw_writel(parentmask, S3C2410_SRCPND);
- __raw_writel(parentmask, S3C2410_INTPND);
- }
-}
-
-static inline void s3c_irqsub_ack(unsigned int irqno,
- unsigned int parentmask,
- unsigned int group)
-{
- unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
- __raw_writel(bit, S3C2410_SUBSRCPND);
-
- /* only ack parent if we've got all the irqs (seems we must
- * ack, all and hope that the irq system retriggers ok when
- * the interrupt goes off again)
- */
-
- if (1) {
- __raw_writel(parentmask, S3C2410_SRCPND);
- __raw_writel(parentmask, S3C2410_INTPND);
- }
-}
-
-/* exported for use in arch/arm/mach-s3c2410 */
-
-#ifdef CONFIG_PM
-extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
-#else
-#define s3c_irq_wake NULL
-#endif
-
-extern int s3c_irqext_type(struct irq_data *d, unsigned int type);
diff --git a/arch/arm/plat-samsung/include/plat/s3c2410.h b/arch/arm/plat-samsung/include/plat/s3c2410.h
deleted file mode 100644
index 55b0e5f..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c2410.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c2410.h
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 machine directory
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#ifdef CONFIG_CPU_S3C2410
-
-extern int s3c2410_init(void);
-extern int s3c2410a_init(void);
-
-extern void s3c2410_map_io(void);
-
-extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2410_init_clocks(int xtal);
-
-#else
-#define s3c2410_init_clocks NULL
-#define s3c2410_init_uarts NULL
-#define s3c2410_map_io NULL
-#define s3c2410_init NULL
-#define s3c2410a_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c2412.h b/arch/arm/plat-samsung/include/plat/s3c2412.h
deleted file mode 100644
index cbae50d..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c2412.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c2412.h
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2412 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern int s3c2412_init(void);
-
-extern void s3c2412_map_io(void);
-
-extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2412_init_clocks(int xtal);
-
-extern int s3c2412_baseclk_add(void);
-
-extern void s3c2412_restart(char mode, const char *cmd);
-#else
-#define s3c2412_init_clocks NULL
-#define s3c2412_init_uarts NULL
-#define s3c2412_map_io NULL
-#define s3c2412_init NULL
-#define s3c2412_restart NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h
deleted file mode 100644
index f27399a..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c2416.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c2416.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>
- *
- * Header file for s3c2416 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2416
-
-struct s3c2410_uartcfg;
-
-extern int s3c2416_init(void);
-
-extern void s3c2416_map_io(void);
-
-extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2416_init_clocks(int xtal);
-
-extern int s3c2416_baseclk_add(void);
-
-extern void s3c2416_restart(char mode, const char *cmd);
-
-extern void s3c2416_init_irq(void);
-extern struct syscore_ops s3c2416_irq_syscore_ops;
-
-#else
-#define s3c2416_init_clocks NULL
-#define s3c2416_init_uarts NULL
-#define s3c2416_map_io NULL
-#define s3c2416_init NULL
-#define s3c2416_restart NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h
deleted file mode 100644
index 71b88ec..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c2443.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c2443.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2443 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2443
-
-struct s3c2410_uartcfg;
-
-extern int s3c2443_init(void);
-
-extern void s3c2443_map_io(void);
-
-extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2443_init_clocks(int xtal);
-
-extern int s3c2443_baseclk_add(void);
-
-extern void s3c2443_restart(char mode, const char *cmd);
-
-extern void s3c2443_init_irq(void);
-#else
-#define s3c2443_init_clocks NULL
-#define s3c2443_init_uarts NULL
-#define s3c2443_map_io NULL
-#define s3c2443_init NULL
-#define s3c2443_restart NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c244x.h b/arch/arm/plat-samsung/include/plat/s3c244x.h
deleted file mode 100644
index ea0c961..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c244x.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c244x.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C2440 and S3C2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-extern void s3c244x_map_io(void);
-
-extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c244x_init_clocks(int xtal);
-
-#else
-#define s3c244x_init_clocks NULL
-#define s3c244x_init_uarts NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2440
-extern int s3c2440_init(void);
-
-extern void s3c2440_map_io(void);
-#else
-#define s3c2440_init NULL
-#define s3c2440_map_io NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2442
-extern int s3c2442_init(void);
-
-extern void s3c2442_map_io(void);
-#else
-#define s3c2442_init NULL
-#define s3c2442_map_io NULL
-#endif
diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c
index 50c68fe..766611d 100644
--- a/drivers/clocksource/bcm2835_timer.c
+++ b/drivers/clocksource/bcm2835_timer.c
@@ -95,23 +95,13 @@
}
}
-static struct of_device_id bcm2835_time_match[] __initconst = {
- { .compatible = "brcm,bcm2835-system-timer" },
- {}
-};
-
-static void __init bcm2835_timer_init(void)
+static void __init bcm2835_timer_init(struct device_node *node)
{
- struct device_node *node;
void __iomem *base;
u32 freq;
int irq;
struct bcm2835_timer *timer;
- node = of_find_matching_node(NULL, bcm2835_time_match);
- if (!node)
- panic("No bcm2835 timer node");
-
base = of_iomap(node, 0);
if (!base)
panic("Can't remap registers");
diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c
index bdabdaa..3ef11fb 100644
--- a/drivers/clocksource/clksrc-of.c
+++ b/drivers/clocksource/clksrc-of.c
@@ -26,10 +26,10 @@
{
struct device_node *np;
const struct of_device_id *match;
- void (*init_func)(void);
+ void (*init_func)(struct device_node *);
for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
init_func = match->data;
- init_func();
+ init_func(np);
}
}
diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c
index 0bde03f..2e4d8a6 100644
--- a/drivers/clocksource/tegra20_timer.c
+++ b/drivers/clocksource/tegra20_timer.c
@@ -154,29 +154,12 @@
.dev_id = &tegra_clockevent,
};
-static const struct of_device_id timer_match[] __initconst = {
- { .compatible = "nvidia,tegra20-timer" },
- {}
-};
-
-static const struct of_device_id rtc_match[] __initconst = {
- { .compatible = "nvidia,tegra20-rtc" },
- {}
-};
-
-static void __init tegra20_init_timer(void)
+static void __init tegra20_init_timer(struct device_node *np)
{
- struct device_node *np;
struct clk *clk;
unsigned long rate;
int ret;
- np = of_find_matching_node(NULL, timer_match);
- if (!np) {
- pr_err("Failed to find timer DT node\n");
- BUG();
- }
-
timer_reg_base = of_iomap(np, 0);
if (!timer_reg_base) {
pr_err("Can't map timer registers\n");
@@ -200,30 +183,6 @@
of_node_put(np);
- np = of_find_matching_node(NULL, rtc_match);
- if (!np) {
- pr_err("Failed to find RTC DT node\n");
- BUG();
- }
-
- rtc_base = of_iomap(np, 0);
- if (!rtc_base) {
- pr_err("Can't map RTC registers");
- BUG();
- }
-
- /*
- * rtc registers are used by read_persistent_clock, keep the rtc clock
- * enabled
- */
- clk = clk_get_sys("rtc-tegra", NULL);
- if (IS_ERR(clk))
- pr_warn("Unable to get rtc-tegra clock\n");
- else
- clk_prepare_enable(clk);
-
- of_node_put(np);
-
switch (rate) {
case 12000000:
timer_writel(0x000b, TIMERUS_USEC_CFG);
@@ -259,12 +218,34 @@
tegra_clockevent.irq = tegra_timer_irq.irq;
clockevents_config_and_register(&tegra_clockevent, 1000000,
0x1, 0x1fffffff);
-#ifdef CONFIG_HAVE_ARM_TWD
- twd_local_timer_of_register();
-#endif
+}
+CLOCKSOURCE_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer);
+
+static void __init tegra20_init_rtc(struct device_node *np)
+{
+ struct clk *clk;
+
+ rtc_base = of_iomap(np, 0);
+ if (!rtc_base) {
+ pr_err("Can't map RTC registers");
+ BUG();
+ }
+
+ /*
+ * rtc registers are used by read_persistent_clock, keep the rtc clock
+ * enabled
+ */
+ clk = clk_get_sys("rtc-tegra", NULL);
+ if (IS_ERR(clk))
+ pr_warn("Unable to get rtc-tegra clock\n");
+ else
+ clk_prepare_enable(clk);
+
+ of_node_put(np);
+
register_persistent_clock(NULL, tegra_read_persistent_clock);
}
-CLOCKSOURCE_OF_DECLARE(tegra20, "nvidia,tegra20-timer", tegra20_init_timer);
+CLOCKSOURCE_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
#ifdef CONFIG_PM
static u32 usec_config;
diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c
index 8efc86b..2422552 100644
--- a/drivers/clocksource/vt8500_timer.c
+++ b/drivers/clocksource/vt8500_timer.c
@@ -129,22 +129,10 @@
.dev_id = &clockevent,
};
-static struct of_device_id vt8500_timer_ids[] = {
- { .compatible = "via,vt8500-timer" },
- { }
-};
-
-static void __init vt8500_timer_init(void)
+static void __init vt8500_timer_init(struct device_node *np)
{
- struct device_node *np;
int timer_irq;
- np = of_find_matching_node(NULL, vt8500_timer_ids);
- if (!np) {
- pr_err("%s: Timer description missing from Device Tree\n",
- __func__);
- return;
- }
regbase = of_iomap(np, 0);
if (!regbase) {
pr_err("%s: Missing iobase description in Device Tree\n",
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index add1fd8..47aea33 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -128,7 +128,7 @@
#else
#define gic_data_dist_base(d) ((d)->dist_base.common_base)
#define gic_data_cpu_base(d) ((d)->cpu_base.common_base)
-#define gic_set_base_accessor(d,f)
+#define gic_set_base_accessor(d, f)
#endif
static inline void __iomem *gic_dist_base(struct irq_data *d)
@@ -821,7 +821,7 @@
}
#ifdef CONFIG_OF
-static int gic_cnt __initdata = 0;
+static int gic_cnt __initdata;
int __init gic_of_init(struct device_node *node, struct device_node *parent)
{
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 63fb265..8d6794c 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -25,14 +25,93 @@
#include <mach/dma.h>
-#include <mach/regs-sdi.h>
-
#include <linux/platform_data/mmc-s3cmci.h>
#include "s3cmci.h"
#define DRIVER_NAME "s3c-mci"
+#define S3C2410_SDICON (0x00)
+#define S3C2410_SDIPRE (0x04)
+#define S3C2410_SDICMDARG (0x08)
+#define S3C2410_SDICMDCON (0x0C)
+#define S3C2410_SDICMDSTAT (0x10)
+#define S3C2410_SDIRSP0 (0x14)
+#define S3C2410_SDIRSP1 (0x18)
+#define S3C2410_SDIRSP2 (0x1C)
+#define S3C2410_SDIRSP3 (0x20)
+#define S3C2410_SDITIMER (0x24)
+#define S3C2410_SDIBSIZE (0x28)
+#define S3C2410_SDIDCON (0x2C)
+#define S3C2410_SDIDCNT (0x30)
+#define S3C2410_SDIDSTA (0x34)
+#define S3C2410_SDIFSTA (0x38)
+
+#define S3C2410_SDIDATA (0x3C)
+#define S3C2410_SDIIMSK (0x40)
+
+#define S3C2440_SDIDATA (0x40)
+#define S3C2440_SDIIMSK (0x3C)
+
+#define S3C2440_SDICON_SDRESET (1 << 8)
+#define S3C2410_SDICON_SDIOIRQ (1 << 3)
+#define S3C2410_SDICON_FIFORESET (1 << 1)
+#define S3C2410_SDICON_CLOCKTYPE (1 << 0)
+
+#define S3C2410_SDICMDCON_LONGRSP (1 << 10)
+#define S3C2410_SDICMDCON_WAITRSP (1 << 9)
+#define S3C2410_SDICMDCON_CMDSTART (1 << 8)
+#define S3C2410_SDICMDCON_SENDERHOST (1 << 6)
+#define S3C2410_SDICMDCON_INDEX (0x3f)
+
+#define S3C2410_SDICMDSTAT_CRCFAIL (1 << 12)
+#define S3C2410_SDICMDSTAT_CMDSENT (1 << 11)
+#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1 << 10)
+#define S3C2410_SDICMDSTAT_RSPFIN (1 << 9)
+
+#define S3C2440_SDIDCON_DS_WORD (2 << 22)
+#define S3C2410_SDIDCON_TXAFTERRESP (1 << 20)
+#define S3C2410_SDIDCON_RXAFTERCMD (1 << 19)
+#define S3C2410_SDIDCON_BLOCKMODE (1 << 17)
+#define S3C2410_SDIDCON_WIDEBUS (1 << 16)
+#define S3C2410_SDIDCON_DMAEN (1 << 15)
+#define S3C2410_SDIDCON_STOP (1 << 14)
+#define S3C2440_SDIDCON_DATSTART (1 << 14)
+
+#define S3C2410_SDIDCON_XFER_RXSTART (2 << 12)
+#define S3C2410_SDIDCON_XFER_TXSTART (3 << 12)
+
+#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF)
+
+#define S3C2410_SDIDSTA_SDIOIRQDETECT (1 << 9)
+#define S3C2410_SDIDSTA_FIFOFAIL (1 << 8)
+#define S3C2410_SDIDSTA_CRCFAIL (1 << 7)
+#define S3C2410_SDIDSTA_RXCRCFAIL (1 << 6)
+#define S3C2410_SDIDSTA_DATATIMEOUT (1 << 5)
+#define S3C2410_SDIDSTA_XFERFINISH (1 << 4)
+#define S3C2410_SDIDSTA_TXDATAON (1 << 1)
+#define S3C2410_SDIDSTA_RXDATAON (1 << 0)
+
+#define S3C2440_SDIFSTA_FIFORESET (1 << 16)
+#define S3C2440_SDIFSTA_FIFOFAIL (3 << 14)
+#define S3C2410_SDIFSTA_TFDET (1 << 13)
+#define S3C2410_SDIFSTA_RFDET (1 << 12)
+#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
+
+#define S3C2410_SDIIMSK_RESPONSECRC (1 << 17)
+#define S3C2410_SDIIMSK_CMDSENT (1 << 16)
+#define S3C2410_SDIIMSK_CMDTIMEOUT (1 << 15)
+#define S3C2410_SDIIMSK_RESPONSEND (1 << 14)
+#define S3C2410_SDIIMSK_SDIOIRQ (1 << 12)
+#define S3C2410_SDIIMSK_FIFOFAIL (1 << 11)
+#define S3C2410_SDIIMSK_CRCSTATUS (1 << 10)
+#define S3C2410_SDIIMSK_DATACRC (1 << 9)
+#define S3C2410_SDIIMSK_DATATIMEOUT (1 << 8)
+#define S3C2410_SDIIMSK_DATAFINISH (1 << 7)
+#define S3C2410_SDIIMSK_TXFIFOHALF (1 << 4)
+#define S3C2410_SDIIMSK_RXFIFOLAST (1 << 2)
+#define S3C2410_SDIIMSK_RXFIFOHALF (1 << 0)
+
enum dbg_channels {
dbg_err = (1 << 0),
dbg_debug = (1 << 1),
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 27cfda4..08ed5e1 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -340,6 +340,7 @@
__used __section(__clksrc_of_table) \
= { .compatible = compat, .data = fn };
#else
+static inline void clocksource_of_init(void) {}
#define CLOCKSOURCE_OF_DECLARE(name, compat, fn)
#endif