drm: sti: fix clocking issues in crtc
fix and simplify clock management in crtc to avoid unbalanced
call to clk_prepare_enable and clk_disable_unprepare functions
remove unused functions
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
diff --git a/drivers/gpu/drm/sti/sti_crtc.c b/drivers/gpu/drm/sti/sti_crtc.c
index 7fab3af..c7d734d 100644
--- a/drivers/gpu/drm/sti/sti_crtc.c
+++ b/drivers/gpu/drm/sti/sti_crtc.c
@@ -23,22 +23,11 @@
static void sti_crtc_enable(struct drm_crtc *crtc)
{
struct sti_mixer *mixer = to_sti_mixer(crtc);
- struct device *dev = mixer->dev;
- struct sti_compositor *compo = dev_get_drvdata(dev);
DRM_DEBUG_DRIVER("\n");
mixer->status = STI_MIXER_READY;
- /* Prepare and enable the compo IP clock */
- if (mixer->id == STI_MIXER_MAIN) {
- if (clk_prepare_enable(compo->clk_compo_main))
- DRM_INFO("Failed to prepare/enable compo_main clk\n");
- } else {
- if (clk_prepare_enable(compo->clk_compo_aux))
- DRM_INFO("Failed to prepare/enable compo_aux clk\n");
- }
-
drm_crtc_vblank_on(crtc);
}
@@ -57,9 +46,8 @@
struct sti_mixer *mixer = to_sti_mixer(crtc);
struct device *dev = mixer->dev;
struct sti_compositor *compo = dev_get_drvdata(dev);
- struct clk *clk;
+ struct clk *compo_clk, *pix_clk;
int rate = mode->clock * 1000;
- int res;
DRM_DEBUG_KMS("CRTC:%d (%s) mode:%d (%s)\n",
crtc->base.id, sti_mixer_to_str(mixer),
@@ -74,32 +62,46 @@
mode->vsync_start, mode->vsync_end,
mode->vtotal, mode->type, mode->flags);
- /* Set rate and prepare/enable pixel clock */
- if (mixer->id == STI_MIXER_MAIN)
- clk = compo->clk_pix_main;
- else
- clk = compo->clk_pix_aux;
-
- res = clk_set_rate(clk, rate);
- if (res < 0) {
- DRM_ERROR("Cannot set rate (%dHz) for pix clk\n", rate);
- return -EINVAL;
+ if (mixer->id == STI_MIXER_MAIN) {
+ compo_clk = compo->clk_compo_main;
+ pix_clk = compo->clk_pix_main;
+ } else {
+ compo_clk = compo->clk_compo_aux;
+ pix_clk = compo->clk_pix_aux;
}
- if (clk_prepare_enable(clk)) {
+
+ /* Prepare and enable the compo IP clock */
+ if (clk_prepare_enable(compo_clk)) {
+ DRM_INFO("Failed to prepare/enable compositor clk\n");
+ goto compo_error;
+ }
+
+ /* Set rate and prepare/enable pixel clock */
+ if (clk_set_rate(pix_clk, rate) < 0) {
+ DRM_ERROR("Cannot set rate (%dHz) for pix clk\n", rate);
+ goto pix_error;
+ }
+ if (clk_prepare_enable(pix_clk)) {
DRM_ERROR("Failed to prepare/enable pix clk\n");
- return -EINVAL;
+ goto pix_error;
}
sti_vtg_set_config(mixer->id == STI_MIXER_MAIN ?
compo->vtg_main : compo->vtg_aux, &crtc->mode);
- res = sti_mixer_active_video_area(mixer, &crtc->mode);
- if (res) {
+ if (sti_mixer_active_video_area(mixer, &crtc->mode)) {
DRM_ERROR("Can't set active video area\n");
- return -EINVAL;
+ goto mixer_error;
}
- return res;
+ return 0;
+
+mixer_error:
+ clk_disable_unprepare(pix_clk);
+pix_error:
+ clk_disable_unprepare(compo_clk);
+compo_error:
+ return -EINVAL;
}
static void sti_crtc_disable(struct drm_crtc *crtc)
@@ -130,7 +132,6 @@
static void
sti_crtc_mode_set_nofb(struct drm_crtc *crtc)
{
- sti_crtc_enable(crtc);
sti_crtc_mode_set(crtc, &crtc->state->adjusted_mode);
}
@@ -221,9 +222,7 @@
static const struct drm_crtc_helper_funcs sti_crtc_helper_funcs = {
.enable = sti_crtc_enable,
.disable = sti_crtc_disabling,
- .mode_set = drm_helper_crtc_mode_set,
.mode_set_nofb = sti_crtc_mode_set_nofb,
- .mode_set_base = drm_helper_crtc_mode_set_base,
.atomic_begin = sti_crtc_atomic_begin,
.atomic_flush = sti_crtc_atomic_flush,
};