| /* |
| * Copyright (C) 2012 Avionic Design GmbH |
| * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/clk.h> |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_panel.h> |
| |
| #include "drm.h" |
| #include "dc.h" |
| |
| struct tegra_rgb { |
| struct tegra_output output; |
| struct tegra_dc *dc; |
| |
| struct clk *clk_parent; |
| struct clk *clk; |
| }; |
| |
| static inline struct tegra_rgb *to_rgb(struct tegra_output *output) |
| { |
| return container_of(output, struct tegra_rgb, output); |
| } |
| |
| struct reg_entry { |
| unsigned long offset; |
| unsigned long value; |
| }; |
| |
| static const struct reg_entry rgb_enable[] = { |
| { DC_COM_PIN_OUTPUT_ENABLE(0), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_ENABLE(1), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_ENABLE(2), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_ENABLE(3), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_POLARITY(0), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_POLARITY(1), 0x01000000 }, |
| { DC_COM_PIN_OUTPUT_POLARITY(2), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_POLARITY(3), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_DATA(0), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_DATA(1), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_DATA(2), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_DATA(3), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_SELECT(0), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_SELECT(1), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_SELECT(2), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_SELECT(3), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_SELECT(4), 0x00210222 }, |
| { DC_COM_PIN_OUTPUT_SELECT(5), 0x00002200 }, |
| { DC_COM_PIN_OUTPUT_SELECT(6), 0x00020000 }, |
| }; |
| |
| static const struct reg_entry rgb_disable[] = { |
| { DC_COM_PIN_OUTPUT_SELECT(6), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_SELECT(5), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_SELECT(4), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_SELECT(3), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_SELECT(2), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_SELECT(1), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_SELECT(0), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_DATA(3), 0xaaaaaaaa }, |
| { DC_COM_PIN_OUTPUT_DATA(2), 0xaaaaaaaa }, |
| { DC_COM_PIN_OUTPUT_DATA(1), 0xaaaaaaaa }, |
| { DC_COM_PIN_OUTPUT_DATA(0), 0xaaaaaaaa }, |
| { DC_COM_PIN_OUTPUT_POLARITY(3), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_POLARITY(2), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_POLARITY(1), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_POLARITY(0), 0x00000000 }, |
| { DC_COM_PIN_OUTPUT_ENABLE(3), 0x55555555 }, |
| { DC_COM_PIN_OUTPUT_ENABLE(2), 0x55555555 }, |
| { DC_COM_PIN_OUTPUT_ENABLE(1), 0x55150005 }, |
| { DC_COM_PIN_OUTPUT_ENABLE(0), 0x55555555 }, |
| }; |
| |
| static void tegra_dc_write_regs(struct tegra_dc *dc, |
| const struct reg_entry *table, |
| unsigned int num) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < num; i++) |
| tegra_dc_writel(dc, table[i].value, table[i].offset); |
| } |
| |
| static const struct drm_connector_funcs tegra_rgb_connector_funcs = { |
| .dpms = drm_atomic_helper_connector_dpms, |
| .reset = drm_atomic_helper_connector_reset, |
| .detect = tegra_output_connector_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = tegra_output_connector_destroy, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| }; |
| |
| static enum drm_mode_status |
| tegra_rgb_connector_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| /* |
| * FIXME: For now, always assume that the mode is okay. There are |
| * unresolved issues with clk_round_rate(), which doesn't always |
| * reliably report whether a frequency can be set or not. |
| */ |
| return MODE_OK; |
| } |
| |
| static const struct drm_connector_helper_funcs tegra_rgb_connector_helper_funcs = { |
| .get_modes = tegra_output_connector_get_modes, |
| .mode_valid = tegra_rgb_connector_mode_valid, |
| .best_encoder = tegra_output_connector_best_encoder, |
| }; |
| |
| static const struct drm_encoder_funcs tegra_rgb_encoder_funcs = { |
| .destroy = tegra_output_encoder_destroy, |
| }; |
| |
| static void tegra_rgb_encoder_disable(struct drm_encoder *encoder) |
| { |
| struct tegra_output *output = encoder_to_output(encoder); |
| struct tegra_rgb *rgb = to_rgb(output); |
| |
| if (output->panel) |
| drm_panel_disable(output->panel); |
| |
| tegra_dc_write_regs(rgb->dc, rgb_disable, ARRAY_SIZE(rgb_disable)); |
| tegra_dc_commit(rgb->dc); |
| |
| if (output->panel) |
| drm_panel_unprepare(output->panel); |
| } |
| |
| static void tegra_rgb_encoder_enable(struct drm_encoder *encoder) |
| { |
| struct tegra_output *output = encoder_to_output(encoder); |
| struct tegra_rgb *rgb = to_rgb(output); |
| u32 value; |
| |
| if (output->panel) |
| drm_panel_prepare(output->panel); |
| |
| tegra_dc_write_regs(rgb->dc, rgb_enable, ARRAY_SIZE(rgb_enable)); |
| |
| value = DE_SELECT_ACTIVE | DE_CONTROL_NORMAL; |
| tegra_dc_writel(rgb->dc, value, DC_DISP_DATA_ENABLE_OPTIONS); |
| |
| /* XXX: parameterize? */ |
| value = tegra_dc_readl(rgb->dc, DC_COM_PIN_OUTPUT_POLARITY(1)); |
| value &= ~LVS_OUTPUT_POLARITY_LOW; |
| value &= ~LHS_OUTPUT_POLARITY_LOW; |
| tegra_dc_writel(rgb->dc, value, DC_COM_PIN_OUTPUT_POLARITY(1)); |
| |
| /* XXX: parameterize? */ |
| value = DISP_DATA_FORMAT_DF1P1C | DISP_ALIGNMENT_MSB | |
| DISP_ORDER_RED_BLUE; |
| tegra_dc_writel(rgb->dc, value, DC_DISP_DISP_INTERFACE_CONTROL); |
| |
| /* XXX: parameterize? */ |
| value = SC0_H_QUALIFIER_NONE | SC1_H_QUALIFIER_NONE; |
| tegra_dc_writel(rgb->dc, value, DC_DISP_SHIFT_CLOCK_OPTIONS); |
| |
| tegra_dc_commit(rgb->dc); |
| |
| if (output->panel) |
| drm_panel_enable(output->panel); |
| } |
| |
| static int |
| tegra_rgb_encoder_atomic_check(struct drm_encoder *encoder, |
| struct drm_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| struct tegra_output *output = encoder_to_output(encoder); |
| struct tegra_dc *dc = to_tegra_dc(conn_state->crtc); |
| unsigned long pclk = crtc_state->mode.clock * 1000; |
| struct tegra_rgb *rgb = to_rgb(output); |
| unsigned int div; |
| int err; |
| |
| /* |
| * We may not want to change the frequency of the parent clock, since |
| * it may be a parent for other peripherals. This is due to the fact |
| * that on Tegra20 there's only a single clock dedicated to display |
| * (pll_d_out0), whereas later generations have a second one that can |
| * be used to independently drive a second output (pll_d2_out0). |
| * |
| * As a way to support multiple outputs on Tegra20 as well, pll_p is |
| * typically used as the parent clock for the display controllers. |
| * But this comes at a cost: pll_p is the parent of several other |
| * peripherals, so its frequency shouldn't change out of the blue. |
| * |
| * The best we can do at this point is to use the shift clock divider |
| * and hope that the desired frequency can be matched (or at least |
| * matched sufficiently close that the panel will still work). |
| */ |
| div = ((clk_get_rate(rgb->clk) * 2) / pclk) - 2; |
| pclk = 0; |
| |
| err = tegra_dc_state_setup_clock(dc, crtc_state, rgb->clk_parent, |
| pclk, div); |
| if (err < 0) { |
| dev_err(output->dev, "failed to setup CRTC state: %d\n", err); |
| return err; |
| } |
| |
| return err; |
| } |
| |
| static const struct drm_encoder_helper_funcs tegra_rgb_encoder_helper_funcs = { |
| .disable = tegra_rgb_encoder_disable, |
| .enable = tegra_rgb_encoder_enable, |
| .atomic_check = tegra_rgb_encoder_atomic_check, |
| }; |
| |
| int tegra_dc_rgb_probe(struct tegra_dc *dc) |
| { |
| struct device_node *np; |
| struct tegra_rgb *rgb; |
| int err; |
| |
| np = of_get_child_by_name(dc->dev->of_node, "rgb"); |
| if (!np || !of_device_is_available(np)) |
| return -ENODEV; |
| |
| rgb = devm_kzalloc(dc->dev, sizeof(*rgb), GFP_KERNEL); |
| if (!rgb) |
| return -ENOMEM; |
| |
| rgb->output.dev = dc->dev; |
| rgb->output.of_node = np; |
| rgb->dc = dc; |
| |
| err = tegra_output_probe(&rgb->output); |
| if (err < 0) |
| return err; |
| |
| rgb->clk = devm_clk_get(dc->dev, NULL); |
| if (IS_ERR(rgb->clk)) { |
| dev_err(dc->dev, "failed to get clock\n"); |
| return PTR_ERR(rgb->clk); |
| } |
| |
| rgb->clk_parent = devm_clk_get(dc->dev, "parent"); |
| if (IS_ERR(rgb->clk_parent)) { |
| dev_err(dc->dev, "failed to get parent clock\n"); |
| return PTR_ERR(rgb->clk_parent); |
| } |
| |
| err = clk_set_parent(rgb->clk, rgb->clk_parent); |
| if (err < 0) { |
| dev_err(dc->dev, "failed to set parent clock: %d\n", err); |
| return err; |
| } |
| |
| dc->rgb = &rgb->output; |
| |
| return 0; |
| } |
| |
| int tegra_dc_rgb_remove(struct tegra_dc *dc) |
| { |
| if (!dc->rgb) |
| return 0; |
| |
| tegra_output_remove(dc->rgb); |
| dc->rgb = NULL; |
| |
| return 0; |
| } |
| |
| int tegra_dc_rgb_init(struct drm_device *drm, struct tegra_dc *dc) |
| { |
| struct tegra_output *output = dc->rgb; |
| int err; |
| |
| if (!dc->rgb) |
| return -ENODEV; |
| |
| drm_connector_init(drm, &output->connector, &tegra_rgb_connector_funcs, |
| DRM_MODE_CONNECTOR_LVDS); |
| drm_connector_helper_add(&output->connector, |
| &tegra_rgb_connector_helper_funcs); |
| output->connector.dpms = DRM_MODE_DPMS_OFF; |
| |
| drm_encoder_init(drm, &output->encoder, &tegra_rgb_encoder_funcs, |
| DRM_MODE_ENCODER_LVDS); |
| drm_encoder_helper_add(&output->encoder, |
| &tegra_rgb_encoder_helper_funcs); |
| |
| drm_mode_connector_attach_encoder(&output->connector, |
| &output->encoder); |
| drm_connector_register(&output->connector); |
| |
| err = tegra_output_init(drm, output); |
| if (err < 0) { |
| dev_err(output->dev, "failed to initialize output: %d\n", err); |
| return err; |
| } |
| |
| /* |
| * Other outputs can be attached to either display controller. The RGB |
| * outputs are an exception and work only with their parent display |
| * controller. |
| */ |
| output->encoder.possible_crtcs = drm_crtc_mask(&dc->base); |
| |
| return 0; |
| } |
| |
| int tegra_dc_rgb_exit(struct tegra_dc *dc) |
| { |
| if (dc->rgb) |
| tegra_output_exit(dc->rgb); |
| |
| return 0; |
| } |