| /* |
| * QLogic iSCSI HBA Driver |
| * Copyright (c) 2003-2013 QLogic Corporation |
| * |
| * See LICENSE.qla4xxx for copyright and licensing details. |
| */ |
| |
| #include <linux/ctype.h> |
| #include "ql4_def.h" |
| #include "ql4_glbl.h" |
| #include "ql4_dbg.h" |
| #include "ql4_inline.h" |
| #include "ql4_version.h" |
| |
| void qla4xxx_queue_mbox_cmd(struct scsi_qla_host *ha, uint32_t *mbx_cmd, |
| int in_count) |
| { |
| int i; |
| |
| /* Load all mailbox registers, except mailbox 0. */ |
| for (i = 1; i < in_count; i++) |
| writel(mbx_cmd[i], &ha->reg->mailbox[i]); |
| |
| /* Wakeup firmware */ |
| writel(mbx_cmd[0], &ha->reg->mailbox[0]); |
| readl(&ha->reg->mailbox[0]); |
| writel(set_rmask(CSR_INTR_RISC), &ha->reg->ctrl_status); |
| readl(&ha->reg->ctrl_status); |
| } |
| |
| void qla4xxx_process_mbox_intr(struct scsi_qla_host *ha, int out_count) |
| { |
| int intr_status; |
| |
| intr_status = readl(&ha->reg->ctrl_status); |
| if (intr_status & INTR_PENDING) { |
| /* |
| * Service the interrupt. |
| * The ISR will save the mailbox status registers |
| * to a temporary storage location in the adapter structure. |
| */ |
| ha->mbox_status_count = out_count; |
| ha->isp_ops->interrupt_service_routine(ha, intr_status); |
| } |
| } |
| |
| /** |
| * qla4xxx_is_intr_poll_mode – Are we allowed to poll for interrupts? |
| * @ha: Pointer to host adapter structure. |
| * @ret: 1=polling mode, 0=non-polling mode |
| **/ |
| static int qla4xxx_is_intr_poll_mode(struct scsi_qla_host *ha) |
| { |
| int rval = 1; |
| |
| if (is_qla8032(ha) || is_qla8042(ha)) { |
| if (test_bit(AF_IRQ_ATTACHED, &ha->flags) && |
| test_bit(AF_83XX_MBOX_INTR_ON, &ha->flags)) |
| rval = 0; |
| } else { |
| if (test_bit(AF_IRQ_ATTACHED, &ha->flags) && |
| test_bit(AF_INTERRUPTS_ON, &ha->flags) && |
| test_bit(AF_ONLINE, &ha->flags) && |
| !test_bit(AF_HA_REMOVAL, &ha->flags)) |
| rval = 0; |
| } |
| |
| return rval; |
| } |
| |
| /** |
| * qla4xxx_mailbox_command - issues mailbox commands |
| * @ha: Pointer to host adapter structure. |
| * @inCount: number of mailbox registers to load. |
| * @outCount: number of mailbox registers to return. |
| * @mbx_cmd: data pointer for mailbox in registers. |
| * @mbx_sts: data pointer for mailbox out registers. |
| * |
| * This routine issue mailbox commands and waits for completion. |
| * If outCount is 0, this routine completes successfully WITHOUT waiting |
| * for the mailbox command to complete. |
| **/ |
| int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount, |
| uint8_t outCount, uint32_t *mbx_cmd, |
| uint32_t *mbx_sts) |
| { |
| int status = QLA_ERROR; |
| uint8_t i; |
| u_long wait_count; |
| unsigned long flags = 0; |
| uint32_t dev_state; |
| |
| /* Make sure that pointers are valid */ |
| if (!mbx_cmd || !mbx_sts) { |
| DEBUG2(printk("scsi%ld: %s: Invalid mbx_cmd or mbx_sts " |
| "pointer\n", ha->host_no, __func__)); |
| return status; |
| } |
| |
| if (is_qla40XX(ha)) { |
| if (test_bit(AF_HA_REMOVAL, &ha->flags)) { |
| DEBUG2(ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: " |
| "prematurely completing mbx cmd as " |
| "adapter removal detected\n", |
| ha->host_no, __func__)); |
| return status; |
| } |
| } |
| |
| if ((is_aer_supported(ha)) && |
| (test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags))) { |
| DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Perm failure on EEH, " |
| "timeout MBX Exiting.\n", ha->host_no, __func__)); |
| return status; |
| } |
| |
| /* Mailbox code active */ |
| wait_count = MBOX_TOV * 100; |
| |
| while (wait_count--) { |
| mutex_lock(&ha->mbox_sem); |
| if (!test_bit(AF_MBOX_COMMAND, &ha->flags)) { |
| set_bit(AF_MBOX_COMMAND, &ha->flags); |
| mutex_unlock(&ha->mbox_sem); |
| break; |
| } |
| mutex_unlock(&ha->mbox_sem); |
| if (!wait_count) { |
| DEBUG2(printk("scsi%ld: %s: mbox_sem failed\n", |
| ha->host_no, __func__)); |
| return status; |
| } |
| msleep(10); |
| } |
| |
| if (is_qla80XX(ha)) { |
| if (test_bit(AF_FW_RECOVERY, &ha->flags)) { |
| DEBUG2(ql4_printk(KERN_WARNING, ha, |
| "scsi%ld: %s: prematurely completing mbx cmd as firmware recovery detected\n", |
| ha->host_no, __func__)); |
| goto mbox_exit; |
| } |
| /* Do not send any mbx cmd if h/w is in failed state*/ |
| ha->isp_ops->idc_lock(ha); |
| dev_state = qla4_8xxx_rd_direct(ha, QLA8XXX_CRB_DEV_STATE); |
| ha->isp_ops->idc_unlock(ha); |
| if (dev_state == QLA8XXX_DEV_FAILED) { |
| ql4_printk(KERN_WARNING, ha, |
| "scsi%ld: %s: H/W is in failed state, do not send any mailbox commands\n", |
| ha->host_no, __func__); |
| goto mbox_exit; |
| } |
| } |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| |
| ha->mbox_status_count = outCount; |
| for (i = 0; i < outCount; i++) |
| ha->mbox_status[i] = 0; |
| |
| /* Queue the mailbox command to the firmware */ |
| ha->isp_ops->queue_mailbox_command(ha, mbx_cmd, inCount); |
| |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| /* Wait for completion */ |
| |
| /* |
| * If we don't want status, don't wait for the mailbox command to |
| * complete. For example, MBOX_CMD_RESET_FW doesn't return status, |
| * you must poll the inbound Interrupt Mask for completion. |
| */ |
| if (outCount == 0) { |
| status = QLA_SUCCESS; |
| goto mbox_exit; |
| } |
| |
| /* |
| * Wait for completion: Poll or completion queue |
| */ |
| if (qla4xxx_is_intr_poll_mode(ha)) { |
| /* Poll for command to complete */ |
| wait_count = jiffies + MBOX_TOV * HZ; |
| while (test_bit(AF_MBOX_COMMAND_DONE, &ha->flags) == 0) { |
| if (time_after_eq(jiffies, wait_count)) |
| break; |
| /* |
| * Service the interrupt. |
| * The ISR will save the mailbox status registers |
| * to a temporary storage location in the adapter |
| * structure. |
| */ |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| ha->isp_ops->process_mailbox_interrupt(ha, outCount); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| msleep(10); |
| } |
| } else { |
| /* Do not poll for completion. Use completion queue */ |
| set_bit(AF_MBOX_COMMAND_NOPOLL, &ha->flags); |
| wait_for_completion_timeout(&ha->mbx_intr_comp, MBOX_TOV * HZ); |
| clear_bit(AF_MBOX_COMMAND_NOPOLL, &ha->flags); |
| } |
| |
| /* Check for mailbox timeout. */ |
| if (!test_bit(AF_MBOX_COMMAND_DONE, &ha->flags)) { |
| if (is_qla80XX(ha) && |
| test_bit(AF_FW_RECOVERY, &ha->flags)) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "scsi%ld: %s: prematurely completing mbx cmd as " |
| "firmware recovery detected\n", |
| ha->host_no, __func__)); |
| goto mbox_exit; |
| } |
| DEBUG2(printk("scsi%ld: Mailbox Cmd 0x%08X timed out ...," |
| " Scheduling Adapter Reset\n", ha->host_no, |
| mbx_cmd[0])); |
| ha->mailbox_timeout_count++; |
| mbx_sts[0] = (-1); |
| set_bit(DPC_RESET_HA, &ha->dpc_flags); |
| if (is_qla8022(ha)) { |
| ql4_printk(KERN_INFO, ha, |
| "disabling pause transmit on port 0 & 1.\n"); |
| qla4_82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x98, |
| CRB_NIU_XG_PAUSE_CTL_P0 | |
| CRB_NIU_XG_PAUSE_CTL_P1); |
| } else if (is_qla8032(ha) || is_qla8042(ha)) { |
| ql4_printk(KERN_INFO, ha, " %s: disabling pause transmit on port 0 & 1.\n", |
| __func__); |
| qla4_83xx_disable_pause(ha); |
| } |
| goto mbox_exit; |
| } |
| |
| /* |
| * Copy the mailbox out registers to the caller's mailbox in/out |
| * structure. |
| */ |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| for (i = 0; i < outCount; i++) |
| mbx_sts[i] = ha->mbox_status[i]; |
| |
| /* Set return status and error flags (if applicable). */ |
| switch (ha->mbox_status[0]) { |
| case MBOX_STS_COMMAND_COMPLETE: |
| status = QLA_SUCCESS; |
| break; |
| |
| case MBOX_STS_INTERMEDIATE_COMPLETION: |
| status = QLA_SUCCESS; |
| break; |
| |
| case MBOX_STS_BUSY: |
| DEBUG2( printk("scsi%ld: %s: Cmd = %08X, ISP BUSY\n", |
| ha->host_no, __func__, mbx_cmd[0])); |
| ha->mailbox_timeout_count++; |
| break; |
| |
| default: |
| DEBUG2(printk("scsi%ld: %s: **** FAILED, cmd = %08X, " |
| "sts = %08X ****\n", ha->host_no, __func__, |
| mbx_cmd[0], mbx_sts[0])); |
| break; |
| } |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| mbox_exit: |
| mutex_lock(&ha->mbox_sem); |
| clear_bit(AF_MBOX_COMMAND, &ha->flags); |
| mutex_unlock(&ha->mbox_sem); |
| clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags); |
| |
| return status; |
| } |
| |
| /** |
| * qla4xxx_get_minidump_template - Get the firmware template |
| * @ha: Pointer to host adapter structure. |
| * @phys_addr: dma address for template |
| * |
| * Obtain the minidump template from firmware during initialization |
| * as it may not be available when minidump is desired. |
| **/ |
| int qla4xxx_get_minidump_template(struct scsi_qla_host *ha, |
| dma_addr_t phys_addr) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| int status; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_MINIDUMP; |
| mbox_cmd[1] = MINIDUMP_GET_TMPLT_SUBCOMMAND; |
| mbox_cmd[2] = LSDW(phys_addr); |
| mbox_cmd[3] = MSDW(phys_addr); |
| mbox_cmd[4] = ha->fw_dump_tmplt_size; |
| mbox_cmd[5] = 0; |
| |
| status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, &mbox_cmd[0], |
| &mbox_sts[0]); |
| if (status != QLA_SUCCESS) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "scsi%ld: %s: Cmd = %08X, mbx[0] = 0x%04x, mbx[1] = 0x%04x\n", |
| ha->host_no, __func__, mbox_cmd[0], |
| mbox_sts[0], mbox_sts[1])); |
| } |
| return status; |
| } |
| |
| /** |
| * qla4xxx_req_template_size - Get minidump template size from firmware. |
| * @ha: Pointer to host adapter structure. |
| **/ |
| int qla4xxx_req_template_size(struct scsi_qla_host *ha) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| int status; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_MINIDUMP; |
| mbox_cmd[1] = MINIDUMP_GET_SIZE_SUBCOMMAND; |
| |
| status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 8, &mbox_cmd[0], |
| &mbox_sts[0]); |
| if (status == QLA_SUCCESS) { |
| ha->fw_dump_tmplt_size = mbox_sts[1]; |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: sts[0]=0x%04x, template size=0x%04x, size_cm_02=0x%04x, size_cm_04=0x%04x, size_cm_08=0x%04x, size_cm_10=0x%04x, size_cm_FF=0x%04x, version=0x%04x\n", |
| __func__, mbox_sts[0], mbox_sts[1], |
| mbox_sts[2], mbox_sts[3], mbox_sts[4], |
| mbox_sts[5], mbox_sts[6], mbox_sts[7])); |
| if (ha->fw_dump_tmplt_size == 0) |
| status = QLA_ERROR; |
| } else { |
| ql4_printk(KERN_WARNING, ha, |
| "%s: Error sts[0]=0x%04x, mbx[1]=0x%04x\n", |
| __func__, mbox_sts[0], mbox_sts[1]); |
| status = QLA_ERROR; |
| } |
| |
| return status; |
| } |
| |
| void qla4xxx_mailbox_premature_completion(struct scsi_qla_host *ha) |
| { |
| set_bit(AF_FW_RECOVERY, &ha->flags); |
| ql4_printk(KERN_INFO, ha, "scsi%ld: %s: set FW RECOVERY!\n", |
| ha->host_no, __func__); |
| |
| if (test_bit(AF_MBOX_COMMAND, &ha->flags)) { |
| if (test_bit(AF_MBOX_COMMAND_NOPOLL, &ha->flags)) { |
| complete(&ha->mbx_intr_comp); |
| ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Due to fw " |
| "recovery, doing premature completion of " |
| "mbx cmd\n", ha->host_no, __func__); |
| |
| } else { |
| set_bit(AF_MBOX_COMMAND_DONE, &ha->flags); |
| ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Due to fw " |
| "recovery, doing premature completion of " |
| "polling mbx cmd\n", ha->host_no, __func__); |
| } |
| } |
| } |
| |
| static uint8_t |
| qla4xxx_set_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd, |
| uint32_t *mbox_sts, dma_addr_t init_fw_cb_dma) |
| { |
| memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT); |
| memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT); |
| |
| if (is_qla8022(ha)) |
| qla4_82xx_wr_32(ha, ha->nx_db_wr_ptr, 0); |
| |
| mbox_cmd[0] = MBOX_CMD_INITIALIZE_FIRMWARE; |
| mbox_cmd[1] = 0; |
| mbox_cmd[2] = LSDW(init_fw_cb_dma); |
| mbox_cmd[3] = MSDW(init_fw_cb_dma); |
| mbox_cmd[4] = sizeof(struct addr_ctrl_blk); |
| mbox_cmd[5] = (IFCB_VER_MAX << 8) | IFCB_VER_MIN; |
| |
| if (qla4xxx_mailbox_command(ha, 6, 6, mbox_cmd, mbox_sts) != |
| QLA_SUCCESS) { |
| DEBUG2(printk(KERN_WARNING "scsi%ld: %s: " |
| "MBOX_CMD_INITIALIZE_FIRMWARE" |
| " failed w/ status %04X\n", |
| ha->host_no, __func__, mbox_sts[0])); |
| return QLA_ERROR; |
| } |
| return QLA_SUCCESS; |
| } |
| |
| uint8_t |
| qla4xxx_get_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd, |
| uint32_t *mbox_sts, dma_addr_t init_fw_cb_dma) |
| { |
| memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT); |
| memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT); |
| mbox_cmd[0] = MBOX_CMD_GET_INIT_FW_CTRL_BLOCK; |
| mbox_cmd[2] = LSDW(init_fw_cb_dma); |
| mbox_cmd[3] = MSDW(init_fw_cb_dma); |
| mbox_cmd[4] = sizeof(struct addr_ctrl_blk); |
| |
| if (qla4xxx_mailbox_command(ha, 5, 5, mbox_cmd, mbox_sts) != |
| QLA_SUCCESS) { |
| DEBUG2(printk(KERN_WARNING "scsi%ld: %s: " |
| "MBOX_CMD_GET_INIT_FW_CTRL_BLOCK" |
| " failed w/ status %04X\n", |
| ha->host_no, __func__, mbox_sts[0])); |
| return QLA_ERROR; |
| } |
| return QLA_SUCCESS; |
| } |
| |
| static void |
| qla4xxx_update_local_ip(struct scsi_qla_host *ha, |
| struct addr_ctrl_blk *init_fw_cb) |
| { |
| ha->ip_config.tcp_options = le16_to_cpu(init_fw_cb->ipv4_tcp_opts); |
| ha->ip_config.ipv4_options = le16_to_cpu(init_fw_cb->ipv4_ip_opts); |
| ha->ip_config.ipv4_addr_state = |
| le16_to_cpu(init_fw_cb->ipv4_addr_state); |
| ha->ip_config.eth_mtu_size = |
| le16_to_cpu(init_fw_cb->eth_mtu_size); |
| ha->ip_config.ipv4_port = le16_to_cpu(init_fw_cb->ipv4_port); |
| |
| if (ha->acb_version == ACB_SUPPORTED) { |
| ha->ip_config.ipv6_options = le16_to_cpu(init_fw_cb->ipv6_opts); |
| ha->ip_config.ipv6_addl_options = |
| le16_to_cpu(init_fw_cb->ipv6_addtl_opts); |
| } |
| |
| /* Save IPv4 Address Info */ |
| memcpy(ha->ip_config.ip_address, init_fw_cb->ipv4_addr, |
| min(sizeof(ha->ip_config.ip_address), |
| sizeof(init_fw_cb->ipv4_addr))); |
| memcpy(ha->ip_config.subnet_mask, init_fw_cb->ipv4_subnet, |
| min(sizeof(ha->ip_config.subnet_mask), |
| sizeof(init_fw_cb->ipv4_subnet))); |
| memcpy(ha->ip_config.gateway, init_fw_cb->ipv4_gw_addr, |
| min(sizeof(ha->ip_config.gateway), |
| sizeof(init_fw_cb->ipv4_gw_addr))); |
| |
| ha->ip_config.ipv4_vlan_tag = be16_to_cpu(init_fw_cb->ipv4_vlan_tag); |
| |
| if (is_ipv6_enabled(ha)) { |
| /* Save IPv6 Address */ |
| ha->ip_config.ipv6_link_local_state = |
| le16_to_cpu(init_fw_cb->ipv6_lnk_lcl_addr_state); |
| ha->ip_config.ipv6_addr0_state = |
| le16_to_cpu(init_fw_cb->ipv6_addr0_state); |
| ha->ip_config.ipv6_addr1_state = |
| le16_to_cpu(init_fw_cb->ipv6_addr1_state); |
| ha->ip_config.ipv6_default_router_state = |
| le16_to_cpu(init_fw_cb->ipv6_dflt_rtr_state); |
| ha->ip_config.ipv6_link_local_addr.in6_u.u6_addr8[0] = 0xFE; |
| ha->ip_config.ipv6_link_local_addr.in6_u.u6_addr8[1] = 0x80; |
| |
| memcpy(&ha->ip_config.ipv6_link_local_addr.in6_u.u6_addr8[8], |
| init_fw_cb->ipv6_if_id, |
| min(sizeof(ha->ip_config.ipv6_link_local_addr)/2, |
| sizeof(init_fw_cb->ipv6_if_id))); |
| memcpy(&ha->ip_config.ipv6_addr0, init_fw_cb->ipv6_addr0, |
| min(sizeof(ha->ip_config.ipv6_addr0), |
| sizeof(init_fw_cb->ipv6_addr0))); |
| memcpy(&ha->ip_config.ipv6_addr1, init_fw_cb->ipv6_addr1, |
| min(sizeof(ha->ip_config.ipv6_addr1), |
| sizeof(init_fw_cb->ipv6_addr1))); |
| memcpy(&ha->ip_config.ipv6_default_router_addr, |
| init_fw_cb->ipv6_dflt_rtr_addr, |
| min(sizeof(ha->ip_config.ipv6_default_router_addr), |
| sizeof(init_fw_cb->ipv6_dflt_rtr_addr))); |
| ha->ip_config.ipv6_vlan_tag = |
| be16_to_cpu(init_fw_cb->ipv6_vlan_tag); |
| ha->ip_config.ipv6_port = le16_to_cpu(init_fw_cb->ipv6_port); |
| } |
| } |
| |
| uint8_t |
| qla4xxx_update_local_ifcb(struct scsi_qla_host *ha, |
| uint32_t *mbox_cmd, |
| uint32_t *mbox_sts, |
| struct addr_ctrl_blk *init_fw_cb, |
| dma_addr_t init_fw_cb_dma) |
| { |
| if (qla4xxx_get_ifcb(ha, mbox_cmd, mbox_sts, init_fw_cb_dma) |
| != QLA_SUCCESS) { |
| DEBUG2(printk(KERN_WARNING |
| "scsi%ld: %s: Failed to get init_fw_ctrl_blk\n", |
| ha->host_no, __func__)); |
| return QLA_ERROR; |
| } |
| |
| DEBUG2(qla4xxx_dump_buffer(init_fw_cb, sizeof(struct addr_ctrl_blk))); |
| |
| /* Save some info in adapter structure. */ |
| ha->acb_version = init_fw_cb->acb_version; |
| ha->firmware_options = le16_to_cpu(init_fw_cb->fw_options); |
| ha->heartbeat_interval = init_fw_cb->hb_interval; |
| memcpy(ha->name_string, init_fw_cb->iscsi_name, |
| min(sizeof(ha->name_string), |
| sizeof(init_fw_cb->iscsi_name))); |
| ha->def_timeout = le16_to_cpu(init_fw_cb->def_timeout); |
| /*memcpy(ha->alias, init_fw_cb->Alias, |
| min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/ |
| |
| qla4xxx_update_local_ip(ha, init_fw_cb); |
| |
| return QLA_SUCCESS; |
| } |
| |
| /** |
| * qla4xxx_initialize_fw_cb - initializes firmware control block. |
| * @ha: Pointer to host adapter structure. |
| **/ |
| int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha) |
| { |
| struct addr_ctrl_blk *init_fw_cb; |
| dma_addr_t init_fw_cb_dma; |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| int status = QLA_ERROR; |
| |
| init_fw_cb = dma_alloc_coherent(&ha->pdev->dev, |
| sizeof(struct addr_ctrl_blk), |
| &init_fw_cb_dma, GFP_KERNEL); |
| if (init_fw_cb == NULL) { |
| DEBUG2(printk("scsi%ld: %s: Unable to alloc init_cb\n", |
| ha->host_no, __func__)); |
| goto exit_init_fw_cb_no_free; |
| } |
| memset(init_fw_cb, 0, sizeof(struct addr_ctrl_blk)); |
| |
| /* Get Initialize Firmware Control Block. */ |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma) != |
| QLA_SUCCESS) { |
| dma_free_coherent(&ha->pdev->dev, |
| sizeof(struct addr_ctrl_blk), |
| init_fw_cb, init_fw_cb_dma); |
| goto exit_init_fw_cb; |
| } |
| |
| /* Initialize request and response queues. */ |
| qla4xxx_init_rings(ha); |
| |
| /* Fill in the request and response queue information. */ |
| init_fw_cb->rqq_consumer_idx = cpu_to_le16(ha->request_out); |
| init_fw_cb->compq_producer_idx = cpu_to_le16(ha->response_in); |
| init_fw_cb->rqq_len = __constant_cpu_to_le16(REQUEST_QUEUE_DEPTH); |
| init_fw_cb->compq_len = __constant_cpu_to_le16(RESPONSE_QUEUE_DEPTH); |
| init_fw_cb->rqq_addr_lo = cpu_to_le32(LSDW(ha->request_dma)); |
| init_fw_cb->rqq_addr_hi = cpu_to_le32(MSDW(ha->request_dma)); |
| init_fw_cb->compq_addr_lo = cpu_to_le32(LSDW(ha->response_dma)); |
| init_fw_cb->compq_addr_hi = cpu_to_le32(MSDW(ha->response_dma)); |
| init_fw_cb->shdwreg_addr_lo = cpu_to_le32(LSDW(ha->shadow_regs_dma)); |
| init_fw_cb->shdwreg_addr_hi = cpu_to_le32(MSDW(ha->shadow_regs_dma)); |
| |
| /* Set up required options. */ |
| init_fw_cb->fw_options |= |
| __constant_cpu_to_le16(FWOPT_SESSION_MODE | |
| FWOPT_INITIATOR_MODE); |
| |
| if (is_qla80XX(ha)) |
| init_fw_cb->fw_options |= |
| __constant_cpu_to_le16(FWOPT_ENABLE_CRBDB); |
| |
| init_fw_cb->fw_options &= __constant_cpu_to_le16(~FWOPT_TARGET_MODE); |
| |
| init_fw_cb->add_fw_options = 0; |
| init_fw_cb->add_fw_options |= |
| __constant_cpu_to_le16(ADFWOPT_SERIALIZE_TASK_MGMT); |
| init_fw_cb->add_fw_options |= |
| __constant_cpu_to_le16(ADFWOPT_AUTOCONN_DISABLE); |
| |
| if (qla4xxx_set_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma) |
| != QLA_SUCCESS) { |
| DEBUG2(printk(KERN_WARNING |
| "scsi%ld: %s: Failed to set init_fw_ctrl_blk\n", |
| ha->host_no, __func__)); |
| goto exit_init_fw_cb; |
| } |
| |
| if (qla4xxx_update_local_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], |
| init_fw_cb, init_fw_cb_dma) != QLA_SUCCESS) { |
| DEBUG2(printk("scsi%ld: %s: Failed to update local ifcb\n", |
| ha->host_no, __func__)); |
| goto exit_init_fw_cb; |
| } |
| status = QLA_SUCCESS; |
| |
| exit_init_fw_cb: |
| dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk), |
| init_fw_cb, init_fw_cb_dma); |
| exit_init_fw_cb_no_free: |
| return status; |
| } |
| |
| /** |
| * qla4xxx_get_dhcp_ip_address - gets HBA ip address via DHCP |
| * @ha: Pointer to host adapter structure. |
| **/ |
| int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha) |
| { |
| struct addr_ctrl_blk *init_fw_cb; |
| dma_addr_t init_fw_cb_dma; |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| |
| init_fw_cb = dma_alloc_coherent(&ha->pdev->dev, |
| sizeof(struct addr_ctrl_blk), |
| &init_fw_cb_dma, GFP_KERNEL); |
| if (init_fw_cb == NULL) { |
| printk("scsi%ld: %s: Unable to alloc init_cb\n", ha->host_no, |
| __func__); |
| return QLA_ERROR; |
| } |
| |
| /* Get Initialize Firmware Control Block. */ |
| memset(init_fw_cb, 0, sizeof(struct addr_ctrl_blk)); |
| if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma) != |
| QLA_SUCCESS) { |
| DEBUG2(printk("scsi%ld: %s: Failed to get init_fw_ctrl_blk\n", |
| ha->host_no, __func__)); |
| dma_free_coherent(&ha->pdev->dev, |
| sizeof(struct addr_ctrl_blk), |
| init_fw_cb, init_fw_cb_dma); |
| return QLA_ERROR; |
| } |
| |
| /* Save IP Address. */ |
| qla4xxx_update_local_ip(ha, init_fw_cb); |
| dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk), |
| init_fw_cb, init_fw_cb_dma); |
| |
| return QLA_SUCCESS; |
| } |
| |
| /** |
| * qla4xxx_get_firmware_state - gets firmware state of HBA |
| * @ha: Pointer to host adapter structure. |
| **/ |
| int qla4xxx_get_firmware_state(struct scsi_qla_host * ha) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| |
| /* Get firmware version */ |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_GET_FW_STATE; |
| |
| if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 4, &mbox_cmd[0], &mbox_sts[0]) != |
| QLA_SUCCESS) { |
| DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATE failed w/ " |
| "status %04X\n", ha->host_no, __func__, |
| mbox_sts[0])); |
| return QLA_ERROR; |
| } |
| ha->firmware_state = mbox_sts[1]; |
| ha->board_id = mbox_sts[2]; |
| ha->addl_fw_state = mbox_sts[3]; |
| DEBUG2(printk("scsi%ld: %s firmware_state=0x%x\n", |
| ha->host_no, __func__, ha->firmware_state);) |
| |
| return QLA_SUCCESS; |
| } |
| |
| /** |
| * qla4xxx_get_firmware_status - retrieves firmware status |
| * @ha: Pointer to host adapter structure. |
| **/ |
| int qla4xxx_get_firmware_status(struct scsi_qla_host * ha) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| |
| /* Get firmware version */ |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_GET_FW_STATUS; |
| |
| if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 3, &mbox_cmd[0], &mbox_sts[0]) != |
| QLA_SUCCESS) { |
| DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATUS failed w/ " |
| "status %04X\n", ha->host_no, __func__, |
| mbox_sts[0])); |
| return QLA_ERROR; |
| } |
| |
| /* High-water mark of IOCBs */ |
| ha->iocb_hiwat = mbox_sts[2]; |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: firmware IOCBs available = %d\n", __func__, |
| ha->iocb_hiwat)); |
| |
| if (ha->iocb_hiwat > IOCB_HIWAT_CUSHION) |
| ha->iocb_hiwat -= IOCB_HIWAT_CUSHION; |
| |
| /* Ideally, we should not enter this code, as the # of firmware |
| * IOCBs is hard-coded in the firmware. We set a default |
| * iocb_hiwat here just in case */ |
| if (ha->iocb_hiwat == 0) { |
| ha->iocb_hiwat = REQUEST_QUEUE_DEPTH / 4; |
| DEBUG2(ql4_printk(KERN_WARNING, ha, |
| "%s: Setting IOCB's to = %d\n", __func__, |
| ha->iocb_hiwat)); |
| } |
| |
| return QLA_SUCCESS; |
| } |
| |
| /** |
| * qla4xxx_get_fwddb_entry - retrieves firmware ddb entry |
| * @ha: Pointer to host adapter structure. |
| * @fw_ddb_index: Firmware's device database index |
| * @fw_ddb_entry: Pointer to firmware's device database entry structure |
| * @num_valid_ddb_entries: Pointer to number of valid ddb entries |
| * @next_ddb_index: Pointer to next valid device database index |
| * @fw_ddb_device_state: Pointer to device state |
| **/ |
| int qla4xxx_get_fwddb_entry(struct scsi_qla_host *ha, |
| uint16_t fw_ddb_index, |
| struct dev_db_entry *fw_ddb_entry, |
| dma_addr_t fw_ddb_entry_dma, |
| uint32_t *num_valid_ddb_entries, |
| uint32_t *next_ddb_index, |
| uint32_t *fw_ddb_device_state, |
| uint32_t *conn_err_detail, |
| uint16_t *tcp_source_port_num, |
| uint16_t *connection_id) |
| { |
| int status = QLA_ERROR; |
| uint16_t options; |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| |
| /* Make sure the device index is valid */ |
| if (fw_ddb_index >= MAX_DDB_ENTRIES) { |
| DEBUG2(printk("scsi%ld: %s: ddb [%d] out of range.\n", |
| ha->host_no, __func__, fw_ddb_index)); |
| goto exit_get_fwddb; |
| } |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| if (fw_ddb_entry) |
| memset(fw_ddb_entry, 0, sizeof(struct dev_db_entry)); |
| |
| mbox_cmd[0] = MBOX_CMD_GET_DATABASE_ENTRY; |
| mbox_cmd[1] = (uint32_t) fw_ddb_index; |
| mbox_cmd[2] = LSDW(fw_ddb_entry_dma); |
| mbox_cmd[3] = MSDW(fw_ddb_entry_dma); |
| mbox_cmd[4] = sizeof(struct dev_db_entry); |
| |
| if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 7, &mbox_cmd[0], &mbox_sts[0]) == |
| QLA_ERROR) { |
| DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_DATABASE_ENTRY failed" |
| " with status 0x%04X\n", ha->host_no, __func__, |
| mbox_sts[0])); |
| goto exit_get_fwddb; |
| } |
| if (fw_ddb_index != mbox_sts[1]) { |
| DEBUG2(printk("scsi%ld: %s: ddb mismatch [%d] != [%d].\n", |
| ha->host_no, __func__, fw_ddb_index, |
| mbox_sts[1])); |
| goto exit_get_fwddb; |
| } |
| if (fw_ddb_entry) { |
| options = le16_to_cpu(fw_ddb_entry->options); |
| if (options & DDB_OPT_IPV6_DEVICE) { |
| ql4_printk(KERN_INFO, ha, "%s: DDB[%d] MB0 %04x Tot %d " |
| "Next %d State %04x ConnErr %08x %pI6 " |
| ":%04d \"%s\"\n", __func__, fw_ddb_index, |
| mbox_sts[0], mbox_sts[2], mbox_sts[3], |
| mbox_sts[4], mbox_sts[5], |
| fw_ddb_entry->ip_addr, |
| le16_to_cpu(fw_ddb_entry->port), |
| fw_ddb_entry->iscsi_name); |
| } else { |
| ql4_printk(KERN_INFO, ha, "%s: DDB[%d] MB0 %04x Tot %d " |
| "Next %d State %04x ConnErr %08x %pI4 " |
| ":%04d \"%s\"\n", __func__, fw_ddb_index, |
| mbox_sts[0], mbox_sts[2], mbox_sts[3], |
| mbox_sts[4], mbox_sts[5], |
| fw_ddb_entry->ip_addr, |
| le16_to_cpu(fw_ddb_entry->port), |
| fw_ddb_entry->iscsi_name); |
| } |
| } |
| if (num_valid_ddb_entries) |
| *num_valid_ddb_entries = mbox_sts[2]; |
| if (next_ddb_index) |
| *next_ddb_index = mbox_sts[3]; |
| if (fw_ddb_device_state) |
| *fw_ddb_device_state = mbox_sts[4]; |
| |
| /* |
| * RA: This mailbox has been changed to pass connection error and |
| * details. Its true for ISP4010 as per Version E - Not sure when it |
| * was changed. Get the time2wait from the fw_dd_entry field : |
| * default_time2wait which we call it as minTime2Wait DEV_DB_ENTRY |
| * struct. |
| */ |
| if (conn_err_detail) |
| *conn_err_detail = mbox_sts[5]; |
| if (tcp_source_port_num) |
| *tcp_source_port_num = (uint16_t) (mbox_sts[6] >> 16); |
| if (connection_id) |
| *connection_id = (uint16_t) mbox_sts[6] & 0x00FF; |
| status = QLA_SUCCESS; |
| |
| exit_get_fwddb: |
| return status; |
| } |
| |
| int qla4xxx_conn_open(struct scsi_qla_host *ha, uint16_t fw_ddb_index) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| int status; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_CONN_OPEN; |
| mbox_cmd[1] = fw_ddb_index; |
| |
| status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, &mbox_cmd[0], |
| &mbox_sts[0]); |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: status = %d mbx0 = 0x%x mbx1 = 0x%x\n", |
| __func__, status, mbox_sts[0], mbox_sts[1])); |
| return status; |
| } |
| |
| /** |
| * qla4xxx_set_fwddb_entry - sets a ddb entry. |
| * @ha: Pointer to host adapter structure. |
| * @fw_ddb_index: Firmware's device database index |
| * @fw_ddb_entry_dma: dma address of ddb entry |
| * @mbx_sts: mailbox 0 to be returned or NULL |
| * |
| * This routine initializes or updates the adapter's device database |
| * entry for the specified device. |
| **/ |
| int qla4xxx_set_ddb_entry(struct scsi_qla_host * ha, uint16_t fw_ddb_index, |
| dma_addr_t fw_ddb_entry_dma, uint32_t *mbx_sts) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| int status; |
| |
| /* Do not wait for completion. The firmware will send us an |
| * ASTS_DATABASE_CHANGED (0x8014) to notify us of the login status. |
| */ |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_SET_DATABASE_ENTRY; |
| mbox_cmd[1] = (uint32_t) fw_ddb_index; |
| mbox_cmd[2] = LSDW(fw_ddb_entry_dma); |
| mbox_cmd[3] = MSDW(fw_ddb_entry_dma); |
| mbox_cmd[4] = sizeof(struct dev_db_entry); |
| |
| status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], |
| &mbox_sts[0]); |
| if (mbx_sts) |
| *mbx_sts = mbox_sts[0]; |
| DEBUG2(printk("scsi%ld: %s: status=%d mbx0=0x%x mbx4=0x%x\n", |
| ha->host_no, __func__, status, mbox_sts[0], mbox_sts[4]);) |
| |
| return status; |
| } |
| |
| int qla4xxx_session_logout_ddb(struct scsi_qla_host *ha, |
| struct ddb_entry *ddb_entry, int options) |
| { |
| int status; |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_CONN_CLOSE_SESS_LOGOUT; |
| mbox_cmd[1] = ddb_entry->fw_ddb_index; |
| mbox_cmd[3] = options; |
| |
| status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, &mbox_cmd[0], |
| &mbox_sts[0]); |
| if (status != QLA_SUCCESS) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: MBOX_CMD_CONN_CLOSE_SESS_LOGOUT " |
| "failed sts %04X %04X", __func__, |
| mbox_sts[0], mbox_sts[1])); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * qla4xxx_get_crash_record - retrieves crash record. |
| * @ha: Pointer to host adapter structure. |
| * |
| * This routine retrieves a crash record from the QLA4010 after an 8002h aen. |
| **/ |
| void qla4xxx_get_crash_record(struct scsi_qla_host * ha) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| struct crash_record *crash_record = NULL; |
| dma_addr_t crash_record_dma = 0; |
| uint32_t crash_record_size = 0; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_cmd)); |
| |
| /* Get size of crash record. */ |
| mbox_cmd[0] = MBOX_CMD_GET_CRASH_RECORD; |
| |
| if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) != |
| QLA_SUCCESS) { |
| DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve size!\n", |
| ha->host_no, __func__)); |
| goto exit_get_crash_record; |
| } |
| crash_record_size = mbox_sts[4]; |
| if (crash_record_size == 0) { |
| DEBUG2(printk("scsi%ld: %s: ERROR: Crash record size is 0!\n", |
| ha->host_no, __func__)); |
| goto exit_get_crash_record; |
| } |
| |
| /* Alloc Memory for Crash Record. */ |
| crash_record = dma_alloc_coherent(&ha->pdev->dev, crash_record_size, |
| &crash_record_dma, GFP_KERNEL); |
| if (crash_record == NULL) |
| goto exit_get_crash_record; |
| |
| /* Get Crash Record. */ |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_cmd)); |
| |
| mbox_cmd[0] = MBOX_CMD_GET_CRASH_RECORD; |
| mbox_cmd[2] = LSDW(crash_record_dma); |
| mbox_cmd[3] = MSDW(crash_record_dma); |
| mbox_cmd[4] = crash_record_size; |
| |
| if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) != |
| QLA_SUCCESS) |
| goto exit_get_crash_record; |
| |
| /* Dump Crash Record. */ |
| |
| exit_get_crash_record: |
| if (crash_record) |
| dma_free_coherent(&ha->pdev->dev, crash_record_size, |
| crash_record, crash_record_dma); |
| } |
| |
| /** |
| * qla4xxx_get_conn_event_log - retrieves connection event log |
| * @ha: Pointer to host adapter structure. |
| **/ |
| void qla4xxx_get_conn_event_log(struct scsi_qla_host * ha) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| struct conn_event_log_entry *event_log = NULL; |
| dma_addr_t event_log_dma = 0; |
| uint32_t event_log_size = 0; |
| uint32_t num_valid_entries; |
| uint32_t oldest_entry = 0; |
| uint32_t max_event_log_entries; |
| uint8_t i; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_cmd)); |
| |
| /* Get size of crash record. */ |
| mbox_cmd[0] = MBOX_CMD_GET_CONN_EVENT_LOG; |
| |
| if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) != |
| QLA_SUCCESS) |
| goto exit_get_event_log; |
| |
| event_log_size = mbox_sts[4]; |
| if (event_log_size == 0) |
| goto exit_get_event_log; |
| |
| /* Alloc Memory for Crash Record. */ |
| event_log = dma_alloc_coherent(&ha->pdev->dev, event_log_size, |
| &event_log_dma, GFP_KERNEL); |
| if (event_log == NULL) |
| goto exit_get_event_log; |
| |
| /* Get Crash Record. */ |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_cmd)); |
| |
| mbox_cmd[0] = MBOX_CMD_GET_CONN_EVENT_LOG; |
| mbox_cmd[2] = LSDW(event_log_dma); |
| mbox_cmd[3] = MSDW(event_log_dma); |
| |
| if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) != |
| QLA_SUCCESS) { |
| DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve event " |
| "log!\n", ha->host_no, __func__)); |
| goto exit_get_event_log; |
| } |
| |
| /* Dump Event Log. */ |
| num_valid_entries = mbox_sts[1]; |
| |
| max_event_log_entries = event_log_size / |
| sizeof(struct conn_event_log_entry); |
| |
| if (num_valid_entries > max_event_log_entries) |
| oldest_entry = num_valid_entries % max_event_log_entries; |
| |
| DEBUG3(printk("scsi%ld: Connection Event Log Dump (%d entries):\n", |
| ha->host_no, num_valid_entries)); |
| |
| if (ql4xextended_error_logging == 3) { |
| if (oldest_entry == 0) { |
| /* Circular Buffer has not wrapped around */ |
| for (i=0; i < num_valid_entries; i++) { |
| qla4xxx_dump_buffer((uint8_t *)event_log+ |
| (i*sizeof(*event_log)), |
| sizeof(*event_log)); |
| } |
| } |
| else { |
| /* Circular Buffer has wrapped around - |
| * display accordingly*/ |
| for (i=oldest_entry; i < max_event_log_entries; i++) { |
| qla4xxx_dump_buffer((uint8_t *)event_log+ |
| (i*sizeof(*event_log)), |
| sizeof(*event_log)); |
| } |
| for (i=0; i < oldest_entry; i++) { |
| qla4xxx_dump_buffer((uint8_t *)event_log+ |
| (i*sizeof(*event_log)), |
| sizeof(*event_log)); |
| } |
| } |
| } |
| |
| exit_get_event_log: |
| if (event_log) |
| dma_free_coherent(&ha->pdev->dev, event_log_size, event_log, |
| event_log_dma); |
| } |
| |
| /** |
| * qla4xxx_abort_task - issues Abort Task |
| * @ha: Pointer to host adapter structure. |
| * @srb: Pointer to srb entry |
| * |
| * This routine performs a LUN RESET on the specified target/lun. |
| * The caller must ensure that the ddb_entry and lun_entry pointers |
| * are valid before calling this routine. |
| **/ |
| int qla4xxx_abort_task(struct scsi_qla_host *ha, struct srb *srb) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| struct scsi_cmnd *cmd = srb->cmd; |
| int status = QLA_SUCCESS; |
| unsigned long flags = 0; |
| uint32_t index; |
| |
| /* |
| * Send abort task command to ISP, so that the ISP will return |
| * request with ABORT status |
| */ |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| index = (unsigned long)(unsigned char *)cmd->host_scribble; |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| /* Firmware already posted completion on response queue */ |
| if (index == MAX_SRBS) |
| return status; |
| |
| mbox_cmd[0] = MBOX_CMD_ABORT_TASK; |
| mbox_cmd[1] = srb->ddb->fw_ddb_index; |
| mbox_cmd[2] = index; |
| /* Immediate Command Enable */ |
| mbox_cmd[5] = 0x01; |
| |
| qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], |
| &mbox_sts[0]); |
| if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE) { |
| status = QLA_ERROR; |
| |
| DEBUG2(printk(KERN_WARNING "scsi%ld:%d:%d: abort task FAILED: " |
| "mbx0=%04X, mb1=%04X, mb2=%04X, mb3=%04X, mb4=%04X\n", |
| ha->host_no, cmd->device->id, cmd->device->lun, mbox_sts[0], |
| mbox_sts[1], mbox_sts[2], mbox_sts[3], mbox_sts[4])); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * qla4xxx_reset_lun - issues LUN Reset |
| * @ha: Pointer to host adapter structure. |
| * @ddb_entry: Pointer to device database entry |
| * @lun: lun number |
| * |
| * This routine performs a LUN RESET on the specified target/lun. |
| * The caller must ensure that the ddb_entry and lun_entry pointers |
| * are valid before calling this routine. |
| **/ |
| int qla4xxx_reset_lun(struct scsi_qla_host * ha, struct ddb_entry * ddb_entry, |
| int lun) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| uint32_t scsi_lun[2]; |
| int status = QLA_SUCCESS; |
| |
| DEBUG2(printk("scsi%ld:%d:%d: lun reset issued\n", ha->host_no, |
| ddb_entry->fw_ddb_index, lun)); |
| |
| /* |
| * Send lun reset command to ISP, so that the ISP will return all |
| * outstanding requests with RESET status |
| */ |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| int_to_scsilun(lun, (struct scsi_lun *) scsi_lun); |
| |
| mbox_cmd[0] = MBOX_CMD_LUN_RESET; |
| mbox_cmd[1] = ddb_entry->fw_ddb_index; |
| /* FW expects LUN bytes 0-3 in Incoming Mailbox 2 |
| * (LUN byte 0 is LSByte, byte 3 is MSByte) */ |
| mbox_cmd[2] = cpu_to_le32(scsi_lun[0]); |
| /* FW expects LUN bytes 4-7 in Incoming Mailbox 3 |
| * (LUN byte 4 is LSByte, byte 7 is MSByte) */ |
| mbox_cmd[3] = cpu_to_le32(scsi_lun[1]); |
| mbox_cmd[5] = 0x01; /* Immediate Command Enable */ |
| |
| qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]); |
| if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE && |
| mbox_sts[0] != MBOX_STS_COMMAND_ERROR) |
| status = QLA_ERROR; |
| |
| return status; |
| } |
| |
| /** |
| * qla4xxx_reset_target - issues target Reset |
| * @ha: Pointer to host adapter structure. |
| * @db_entry: Pointer to device database entry |
| * @un_entry: Pointer to lun entry structure |
| * |
| * This routine performs a TARGET RESET on the specified target. |
| * The caller must ensure that the ddb_entry pointers |
| * are valid before calling this routine. |
| **/ |
| int qla4xxx_reset_target(struct scsi_qla_host *ha, |
| struct ddb_entry *ddb_entry) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| int status = QLA_SUCCESS; |
| |
| DEBUG2(printk("scsi%ld:%d: target reset issued\n", ha->host_no, |
| ddb_entry->fw_ddb_index)); |
| |
| /* |
| * Send target reset command to ISP, so that the ISP will return all |
| * outstanding requests with RESET status |
| */ |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_TARGET_WARM_RESET; |
| mbox_cmd[1] = ddb_entry->fw_ddb_index; |
| mbox_cmd[5] = 0x01; /* Immediate Command Enable */ |
| |
| qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], |
| &mbox_sts[0]); |
| if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE && |
| mbox_sts[0] != MBOX_STS_COMMAND_ERROR) |
| status = QLA_ERROR; |
| |
| return status; |
| } |
| |
| int qla4xxx_get_flash(struct scsi_qla_host * ha, dma_addr_t dma_addr, |
| uint32_t offset, uint32_t len) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_READ_FLASH; |
| mbox_cmd[1] = LSDW(dma_addr); |
| mbox_cmd[2] = MSDW(dma_addr); |
| mbox_cmd[3] = offset; |
| mbox_cmd[4] = len; |
| |
| if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, &mbox_cmd[0], &mbox_sts[0]) != |
| QLA_SUCCESS) { |
| DEBUG2(printk("scsi%ld: %s: MBOX_CMD_READ_FLASH, failed w/ " |
| "status %04X %04X, offset %08x, len %08x\n", ha->host_no, |
| __func__, mbox_sts[0], mbox_sts[1], offset, len)); |
| return QLA_ERROR; |
| } |
| return QLA_SUCCESS; |
| } |
| |
| /** |
| * qla4xxx_about_firmware - gets FW, iscsi draft and boot loader version |
| * @ha: Pointer to host adapter structure. |
| * |
| * Retrieves the FW version, iSCSI draft version & bootloader version of HBA. |
| * Mailboxes 2 & 3 may hold an address for data. Make sure that we write 0 to |
| * those mailboxes, if unused. |
| **/ |
| int qla4xxx_about_firmware(struct scsi_qla_host *ha) |
| { |
| struct about_fw_info *about_fw = NULL; |
| dma_addr_t about_fw_dma; |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| int status = QLA_ERROR; |
| |
| about_fw = dma_alloc_coherent(&ha->pdev->dev, |
| sizeof(struct about_fw_info), |
| &about_fw_dma, GFP_KERNEL); |
| if (!about_fw) { |
| DEBUG2(ql4_printk(KERN_ERR, ha, "%s: Unable to alloc memory " |
| "for about_fw\n", __func__)); |
| return status; |
| } |
| |
| memset(about_fw, 0, sizeof(struct about_fw_info)); |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_ABOUT_FW; |
| mbox_cmd[2] = LSDW(about_fw_dma); |
| mbox_cmd[3] = MSDW(about_fw_dma); |
| mbox_cmd[4] = sizeof(struct about_fw_info); |
| |
| status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, MBOX_REG_COUNT, |
| &mbox_cmd[0], &mbox_sts[0]); |
| if (status != QLA_SUCCESS) { |
| DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_ABOUT_FW " |
| "failed w/ status %04X\n", __func__, |
| mbox_sts[0])); |
| goto exit_about_fw; |
| } |
| |
| /* Save version information. */ |
| ha->fw_info.fw_major = le16_to_cpu(about_fw->fw_major); |
| ha->fw_info.fw_minor = le16_to_cpu(about_fw->fw_minor); |
| ha->fw_info.fw_patch = le16_to_cpu(about_fw->fw_patch); |
| ha->fw_info.fw_build = le16_to_cpu(about_fw->fw_build); |
| memcpy(ha->fw_info.fw_build_date, about_fw->fw_build_date, |
| sizeof(about_fw->fw_build_date)); |
| memcpy(ha->fw_info.fw_build_time, about_fw->fw_build_time, |
| sizeof(about_fw->fw_build_time)); |
| strcpy((char *)ha->fw_info.fw_build_user, |
| skip_spaces((char *)about_fw->fw_build_user)); |
| ha->fw_info.fw_load_source = le16_to_cpu(about_fw->fw_load_source); |
| ha->fw_info.iscsi_major = le16_to_cpu(about_fw->iscsi_major); |
| ha->fw_info.iscsi_minor = le16_to_cpu(about_fw->iscsi_minor); |
| ha->fw_info.bootload_major = le16_to_cpu(about_fw->bootload_major); |
| ha->fw_info.bootload_minor = le16_to_cpu(about_fw->bootload_minor); |
| ha->fw_info.bootload_patch = le16_to_cpu(about_fw->bootload_patch); |
| ha->fw_info.bootload_build = le16_to_cpu(about_fw->bootload_build); |
| strcpy((char *)ha->fw_info.extended_timestamp, |
| skip_spaces((char *)about_fw->extended_timestamp)); |
| |
| ha->fw_uptime_secs = le32_to_cpu(mbox_sts[5]); |
| ha->fw_uptime_msecs = le32_to_cpu(mbox_sts[6]); |
| status = QLA_SUCCESS; |
| |
| exit_about_fw: |
| dma_free_coherent(&ha->pdev->dev, sizeof(struct about_fw_info), |
| about_fw, about_fw_dma); |
| return status; |
| } |
| |
| int qla4xxx_get_default_ddb(struct scsi_qla_host *ha, uint32_t options, |
| dma_addr_t dma_addr) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_GET_DATABASE_ENTRY_DEFAULTS; |
| mbox_cmd[1] = options; |
| mbox_cmd[2] = LSDW(dma_addr); |
| mbox_cmd[3] = MSDW(dma_addr); |
| |
| if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]) != |
| QLA_SUCCESS) { |
| DEBUG2(printk("scsi%ld: %s: failed status %04X\n", |
| ha->host_no, __func__, mbox_sts[0])); |
| return QLA_ERROR; |
| } |
| return QLA_SUCCESS; |
| } |
| |
| int qla4xxx_req_ddb_entry(struct scsi_qla_host *ha, uint32_t ddb_index, |
| uint32_t *mbx_sts) |
| { |
| int status; |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_REQUEST_DATABASE_ENTRY; |
| mbox_cmd[1] = ddb_index; |
| |
| status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], |
| &mbox_sts[0]); |
| if (status != QLA_SUCCESS) { |
| DEBUG2(ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n", |
| __func__, mbox_sts[0])); |
| } |
| |
| *mbx_sts = mbox_sts[0]; |
| return status; |
| } |
| |
| int qla4xxx_clear_ddb_entry(struct scsi_qla_host *ha, uint32_t ddb_index) |
| { |
| int status; |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_CLEAR_DATABASE_ENTRY; |
| mbox_cmd[1] = ddb_index; |
| |
| status = qla4xxx_mailbox_command(ha, 2, 1, &mbox_cmd[0], |
| &mbox_sts[0]); |
| if (status != QLA_SUCCESS) { |
| DEBUG2(ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n", |
| __func__, mbox_sts[0])); |
| } |
| |
| return status; |
| } |
| |
| int qla4xxx_set_flash(struct scsi_qla_host *ha, dma_addr_t dma_addr, |
| uint32_t offset, uint32_t length, uint32_t options) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| int status = QLA_SUCCESS; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_WRITE_FLASH; |
| mbox_cmd[1] = LSDW(dma_addr); |
| mbox_cmd[2] = MSDW(dma_addr); |
| mbox_cmd[3] = offset; |
| mbox_cmd[4] = length; |
| mbox_cmd[5] = options; |
| |
| status = qla4xxx_mailbox_command(ha, 6, 2, &mbox_cmd[0], &mbox_sts[0]); |
| if (status != QLA_SUCCESS) { |
| DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_WRITE_FLASH " |
| "failed w/ status %04X, mbx1 %04X\n", |
| __func__, mbox_sts[0], mbox_sts[1])); |
| } |
| return status; |
| } |
| |
| int qla4xxx_bootdb_by_index(struct scsi_qla_host *ha, |
| struct dev_db_entry *fw_ddb_entry, |
| dma_addr_t fw_ddb_entry_dma, uint16_t ddb_index) |
| { |
| uint32_t dev_db_start_offset = FLASH_OFFSET_DB_INFO; |
| uint32_t dev_db_end_offset; |
| int status = QLA_ERROR; |
| |
| memset(fw_ddb_entry, 0, sizeof(*fw_ddb_entry)); |
| |
| dev_db_start_offset += (ddb_index * sizeof(*fw_ddb_entry)); |
| dev_db_end_offset = FLASH_OFFSET_DB_END; |
| |
| if (dev_db_start_offset > dev_db_end_offset) { |
| DEBUG2(ql4_printk(KERN_ERR, ha, |
| "%s:Invalid DDB index %d", __func__, |
| ddb_index)); |
| goto exit_bootdb_failed; |
| } |
| |
| if (qla4xxx_get_flash(ha, fw_ddb_entry_dma, dev_db_start_offset, |
| sizeof(*fw_ddb_entry)) != QLA_SUCCESS) { |
| ql4_printk(KERN_ERR, ha, "scsi%ld: %s: Get Flash" |
| "failed\n", ha->host_no, __func__); |
| goto exit_bootdb_failed; |
| } |
| |
| if (fw_ddb_entry->cookie == DDB_VALID_COOKIE) |
| status = QLA_SUCCESS; |
| |
| exit_bootdb_failed: |
| return status; |
| } |
| |
| int qla4xxx_flashdb_by_index(struct scsi_qla_host *ha, |
| struct dev_db_entry *fw_ddb_entry, |
| dma_addr_t fw_ddb_entry_dma, uint16_t ddb_index) |
| { |
| uint32_t dev_db_start_offset; |
| uint32_t dev_db_end_offset; |
| int status = QLA_ERROR; |
| |
| memset(fw_ddb_entry, 0, sizeof(*fw_ddb_entry)); |
| |
| if (is_qla40XX(ha)) { |
| dev_db_start_offset = FLASH_OFFSET_DB_INFO; |
| dev_db_end_offset = FLASH_OFFSET_DB_END; |
| } else { |
| dev_db_start_offset = FLASH_RAW_ACCESS_ADDR + |
| (ha->hw.flt_region_ddb << 2); |
| /* flt_ddb_size is DDB table size for both ports |
| * so divide it by 2 to calculate the offset for second port |
| */ |
| if (ha->port_num == 1) |
| dev_db_start_offset += (ha->hw.flt_ddb_size / 2); |
| |
| dev_db_end_offset = dev_db_start_offset + |
| (ha->hw.flt_ddb_size / 2); |
| } |
| |
| dev_db_start_offset += (ddb_index * sizeof(*fw_ddb_entry)); |
| |
| if (dev_db_start_offset > dev_db_end_offset) { |
| DEBUG2(ql4_printk(KERN_ERR, ha, |
| "%s:Invalid DDB index %d", __func__, |
| ddb_index)); |
| goto exit_fdb_failed; |
| } |
| |
| if (qla4xxx_get_flash(ha, fw_ddb_entry_dma, dev_db_start_offset, |
| sizeof(*fw_ddb_entry)) != QLA_SUCCESS) { |
| ql4_printk(KERN_ERR, ha, "scsi%ld: %s: Get Flash failed\n", |
| ha->host_no, __func__); |
| goto exit_fdb_failed; |
| } |
| |
| if (fw_ddb_entry->cookie == DDB_VALID_COOKIE) |
| status = QLA_SUCCESS; |
| |
| exit_fdb_failed: |
| return status; |
| } |
| |
| int qla4xxx_get_chap(struct scsi_qla_host *ha, char *username, char *password, |
| uint16_t idx) |
| { |
| int ret = 0; |
| int rval = QLA_ERROR; |
| uint32_t offset = 0, chap_size; |
| struct ql4_chap_table *chap_table; |
| dma_addr_t chap_dma; |
| |
| chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma); |
| if (chap_table == NULL) |
| return -ENOMEM; |
| |
| chap_size = sizeof(struct ql4_chap_table); |
| memset(chap_table, 0, chap_size); |
| |
| if (is_qla40XX(ha)) |
| offset = FLASH_CHAP_OFFSET | (idx * chap_size); |
| else { |
| offset = FLASH_RAW_ACCESS_ADDR + (ha->hw.flt_region_chap << 2); |
| /* flt_chap_size is CHAP table size for both ports |
| * so divide it by 2 to calculate the offset for second port |
| */ |
| if (ha->port_num == 1) |
| offset += (ha->hw.flt_chap_size / 2); |
| offset += (idx * chap_size); |
| } |
| |
| rval = qla4xxx_get_flash(ha, chap_dma, offset, chap_size); |
| if (rval != QLA_SUCCESS) { |
| ret = -EINVAL; |
| goto exit_get_chap; |
| } |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, "Chap Cookie: x%x\n", |
| __le16_to_cpu(chap_table->cookie))); |
| |
| if (__le16_to_cpu(chap_table->cookie) != CHAP_VALID_COOKIE) { |
| ql4_printk(KERN_ERR, ha, "No valid chap entry found\n"); |
| goto exit_get_chap; |
| } |
| |
| strncpy(password, chap_table->secret, QL4_CHAP_MAX_SECRET_LEN); |
| strncpy(username, chap_table->name, QL4_CHAP_MAX_NAME_LEN); |
| chap_table->cookie = __constant_cpu_to_le16(CHAP_VALID_COOKIE); |
| |
| exit_get_chap: |
| dma_pool_free(ha->chap_dma_pool, chap_table, chap_dma); |
| return ret; |
| } |
| |
| static int qla4xxx_set_chap(struct scsi_qla_host *ha, char *username, |
| char *password, uint16_t idx, int bidi) |
| { |
| int ret = 0; |
| int rval = QLA_ERROR; |
| uint32_t offset = 0; |
| struct ql4_chap_table *chap_table; |
| dma_addr_t chap_dma; |
| |
| chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma); |
| if (chap_table == NULL) { |
| ret = -ENOMEM; |
| goto exit_set_chap; |
| } |
| |
| memset(chap_table, 0, sizeof(struct ql4_chap_table)); |
| if (bidi) |
| chap_table->flags |= BIT_6; /* peer */ |
| else |
| chap_table->flags |= BIT_7; /* local */ |
| chap_table->secret_len = strlen(password); |
| strncpy(chap_table->secret, password, MAX_CHAP_SECRET_LEN); |
| strncpy(chap_table->name, username, MAX_CHAP_NAME_LEN); |
| chap_table->cookie = __constant_cpu_to_le16(CHAP_VALID_COOKIE); |
| offset = FLASH_CHAP_OFFSET | (idx * sizeof(struct ql4_chap_table)); |
| rval = qla4xxx_set_flash(ha, chap_dma, offset, |
| sizeof(struct ql4_chap_table), |
| FLASH_OPT_RMW_COMMIT); |
| |
| if (rval == QLA_SUCCESS && ha->chap_list) { |
| /* Update ha chap_list cache */ |
| memcpy((struct ql4_chap_table *)ha->chap_list + idx, |
| chap_table, sizeof(struct ql4_chap_table)); |
| } |
| dma_pool_free(ha->chap_dma_pool, chap_table, chap_dma); |
| if (rval != QLA_SUCCESS) |
| ret = -EINVAL; |
| |
| exit_set_chap: |
| return ret; |
| } |
| |
| |
| int qla4xxx_get_uni_chap_at_index(struct scsi_qla_host *ha, char *username, |
| char *password, uint16_t chap_index) |
| { |
| int rval = QLA_ERROR; |
| struct ql4_chap_table *chap_table = NULL; |
| int max_chap_entries; |
| |
| if (!ha->chap_list) { |
| ql4_printk(KERN_ERR, ha, "Do not have CHAP table cache\n"); |
| rval = QLA_ERROR; |
| goto exit_uni_chap; |
| } |
| |
| if (!username || !password) { |
| ql4_printk(KERN_ERR, ha, "No memory for username & secret\n"); |
| rval = QLA_ERROR; |
| goto exit_uni_chap; |
| } |
| |
| if (is_qla80XX(ha)) |
| max_chap_entries = (ha->hw.flt_chap_size / 2) / |
| sizeof(struct ql4_chap_table); |
| else |
| max_chap_entries = MAX_CHAP_ENTRIES_40XX; |
| |
| if (chap_index > max_chap_entries) { |
| ql4_printk(KERN_ERR, ha, "Invalid Chap index\n"); |
| rval = QLA_ERROR; |
| goto exit_uni_chap; |
| } |
| |
| mutex_lock(&ha->chap_sem); |
| chap_table = (struct ql4_chap_table *)ha->chap_list + chap_index; |
| if (chap_table->cookie != __constant_cpu_to_le16(CHAP_VALID_COOKIE)) { |
| rval = QLA_ERROR; |
| goto exit_unlock_uni_chap; |
| } |
| |
| if (!(chap_table->flags & BIT_7)) { |
| ql4_printk(KERN_ERR, ha, "Unidirectional entry not set\n"); |
| rval = QLA_ERROR; |
| goto exit_unlock_uni_chap; |
| } |
| |
| strncpy(password, chap_table->secret, MAX_CHAP_SECRET_LEN); |
| strncpy(username, chap_table->name, MAX_CHAP_NAME_LEN); |
| |
| rval = QLA_SUCCESS; |
| |
| exit_unlock_uni_chap: |
| mutex_unlock(&ha->chap_sem); |
| exit_uni_chap: |
| return rval; |
| } |
| |
| /** |
| * qla4xxx_get_chap_index - Get chap index given username and secret |
| * @ha: pointer to adapter structure |
| * @username: CHAP username to be searched |
| * @password: CHAP password to be searched |
| * @bidi: Is this a BIDI CHAP |
| * @chap_index: CHAP index to be returned |
| * |
| * Match the username and password in the chap_list, return the index if a |
| * match is found. If a match is not found then add the entry in FLASH and |
| * return the index at which entry is written in the FLASH. |
| **/ |
| int qla4xxx_get_chap_index(struct scsi_qla_host *ha, char *username, |
| char *password, int bidi, uint16_t *chap_index) |
| { |
| int i, rval; |
| int free_index = -1; |
| int found_index = 0; |
| int max_chap_entries = 0; |
| struct ql4_chap_table *chap_table; |
| |
| if (is_qla80XX(ha)) |
| max_chap_entries = (ha->hw.flt_chap_size / 2) / |
| sizeof(struct ql4_chap_table); |
| else |
| max_chap_entries = MAX_CHAP_ENTRIES_40XX; |
| |
| if (!ha->chap_list) { |
| ql4_printk(KERN_ERR, ha, "Do not have CHAP table cache\n"); |
| return QLA_ERROR; |
| } |
| |
| if (!username || !password) { |
| ql4_printk(KERN_ERR, ha, "Do not have username and psw\n"); |
| return QLA_ERROR; |
| } |
| |
| mutex_lock(&ha->chap_sem); |
| for (i = 0; i < max_chap_entries; i++) { |
| chap_table = (struct ql4_chap_table *)ha->chap_list + i; |
| if (chap_table->cookie != |
| __constant_cpu_to_le16(CHAP_VALID_COOKIE)) { |
| if (i > MAX_RESRV_CHAP_IDX && free_index == -1) |
| free_index = i; |
| continue; |
| } |
| if (bidi) { |
| if (chap_table->flags & BIT_7) |
| continue; |
| } else { |
| if (chap_table->flags & BIT_6) |
| continue; |
| } |
| if (!strncmp(chap_table->secret, password, |
| MAX_CHAP_SECRET_LEN) && |
| !strncmp(chap_table->name, username, |
| MAX_CHAP_NAME_LEN)) { |
| *chap_index = i; |
| found_index = 1; |
| break; |
| } |
| } |
| |
| /* If chap entry is not present and a free index is available then |
| * write the entry in flash |
| */ |
| if (!found_index && free_index != -1) { |
| rval = qla4xxx_set_chap(ha, username, password, |
| free_index, bidi); |
| if (!rval) { |
| *chap_index = free_index; |
| found_index = 1; |
| } |
| } |
| |
| mutex_unlock(&ha->chap_sem); |
| |
| if (found_index) |
| return QLA_SUCCESS; |
| return QLA_ERROR; |
| } |
| |
| int qla4xxx_conn_close_sess_logout(struct scsi_qla_host *ha, |
| uint16_t fw_ddb_index, |
| uint16_t connection_id, |
| uint16_t option) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| int status = QLA_SUCCESS; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_CONN_CLOSE_SESS_LOGOUT; |
| mbox_cmd[1] = fw_ddb_index; |
| mbox_cmd[2] = connection_id; |
| mbox_cmd[3] = option; |
| |
| status = qla4xxx_mailbox_command(ha, 4, 2, &mbox_cmd[0], &mbox_sts[0]); |
| if (status != QLA_SUCCESS) { |
| DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_CONN_CLOSE " |
| "option %04x failed w/ status %04X %04X\n", |
| __func__, option, mbox_sts[0], mbox_sts[1])); |
| } |
| return status; |
| } |
| |
| /** |
| * qla4_84xx_extend_idc_tmo - Extend IDC Timeout. |
| * @ha: Pointer to host adapter structure. |
| * @ext_tmo: idc timeout value |
| * |
| * Requests firmware to extend the idc timeout value. |
| **/ |
| static int qla4_84xx_extend_idc_tmo(struct scsi_qla_host *ha, uint32_t ext_tmo) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| int status; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| ext_tmo &= 0xf; |
| |
| mbox_cmd[0] = MBOX_CMD_IDC_TIME_EXTEND; |
| mbox_cmd[1] = ((ha->idc_info.request_desc & 0xfffff0ff) | |
| (ext_tmo << 8)); /* new timeout */ |
| mbox_cmd[2] = ha->idc_info.info1; |
| mbox_cmd[3] = ha->idc_info.info2; |
| mbox_cmd[4] = ha->idc_info.info3; |
| |
| status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, MBOX_REG_COUNT, |
| mbox_cmd, mbox_sts); |
| if (status != QLA_SUCCESS) { |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "scsi%ld: %s: failed status %04X\n", |
| ha->host_no, __func__, mbox_sts[0])); |
| return QLA_ERROR; |
| } else { |
| ql4_printk(KERN_INFO, ha, "%s: IDC timeout extended by %d secs\n", |
| __func__, ext_tmo); |
| } |
| |
| return QLA_SUCCESS; |
| } |
| |
| int qla4xxx_disable_acb(struct scsi_qla_host *ha) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| int status = QLA_SUCCESS; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_DISABLE_ACB; |
| |
| status = qla4xxx_mailbox_command(ha, 8, 5, &mbox_cmd[0], &mbox_sts[0]); |
| if (status != QLA_SUCCESS) { |
| DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_DISABLE_ACB " |
| "failed w/ status %04X %04X %04X", __func__, |
| mbox_sts[0], mbox_sts[1], mbox_sts[2])); |
| } else { |
| if (is_qla8042(ha) && |
| (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE)) { |
| /* |
| * Disable ACB mailbox command takes time to complete |
| * based on the total number of targets connected. |
| * For 512 targets, it took approximately 5 secs to |
| * complete. Setting the timeout value to 8, with the 3 |
| * secs buffer. |
| */ |
| qla4_84xx_extend_idc_tmo(ha, IDC_EXTEND_TOV); |
| if (!wait_for_completion_timeout(&ha->disable_acb_comp, |
| IDC_EXTEND_TOV * HZ)) { |
| ql4_printk(KERN_WARNING, ha, "%s: Disable ACB Completion not received\n", |
| __func__); |
| } |
| } |
| } |
| return status; |
| } |
| |
| int qla4xxx_get_acb(struct scsi_qla_host *ha, dma_addr_t acb_dma, |
| uint32_t acb_type, uint32_t len) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| int status = QLA_SUCCESS; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_GET_ACB; |
| mbox_cmd[1] = acb_type; |
| mbox_cmd[2] = LSDW(acb_dma); |
| mbox_cmd[3] = MSDW(acb_dma); |
| mbox_cmd[4] = len; |
| |
| status = qla4xxx_mailbox_command(ha, 5, 5, &mbox_cmd[0], &mbox_sts[0]); |
| if (status != QLA_SUCCESS) { |
| DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_GET_ACB " |
| "failed w/ status %04X\n", __func__, |
| mbox_sts[0])); |
| } |
| return status; |
| } |
| |
| int qla4xxx_set_acb(struct scsi_qla_host *ha, uint32_t *mbox_cmd, |
| uint32_t *mbox_sts, dma_addr_t acb_dma) |
| { |
| int status = QLA_SUCCESS; |
| |
| memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT); |
| memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT); |
| mbox_cmd[0] = MBOX_CMD_SET_ACB; |
| mbox_cmd[1] = 0; /* Primary ACB */ |
| mbox_cmd[2] = LSDW(acb_dma); |
| mbox_cmd[3] = MSDW(acb_dma); |
| mbox_cmd[4] = sizeof(struct addr_ctrl_blk); |
| |
| status = qla4xxx_mailbox_command(ha, 5, 5, &mbox_cmd[0], &mbox_sts[0]); |
| if (status != QLA_SUCCESS) { |
| DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_SET_ACB " |
| "failed w/ status %04X\n", __func__, |
| mbox_sts[0])); |
| } |
| return status; |
| } |
| |
| int qla4xxx_set_param_ddbentry(struct scsi_qla_host *ha, |
| struct ddb_entry *ddb_entry, |
| struct iscsi_cls_conn *cls_conn, |
| uint32_t *mbx_sts) |
| { |
| struct dev_db_entry *fw_ddb_entry; |
| struct iscsi_conn *conn; |
| struct iscsi_session *sess; |
| struct qla_conn *qla_conn; |
| struct sockaddr *dst_addr; |
| dma_addr_t fw_ddb_entry_dma; |
| int status = QLA_SUCCESS; |
| int rval = 0; |
| struct sockaddr_in *addr; |
| struct sockaddr_in6 *addr6; |
| char *ip; |
| uint16_t iscsi_opts = 0; |
| uint32_t options = 0; |
| uint16_t idx, *ptid; |
| |
| fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), |
| &fw_ddb_entry_dma, GFP_KERNEL); |
| if (!fw_ddb_entry) { |
| DEBUG2(ql4_printk(KERN_ERR, ha, |
| "%s: Unable to allocate dma buffer.\n", |
| __func__)); |
| rval = -ENOMEM; |
| goto exit_set_param_no_free; |
| } |
| |
| conn = cls_conn->dd_data; |
| qla_conn = conn->dd_data; |
| sess = conn->session; |
| dst_addr = (struct sockaddr *)&qla_conn->qla_ep->dst_addr; |
| |
| if (dst_addr->sa_family == AF_INET6) |
| options |= IPV6_DEFAULT_DDB_ENTRY; |
| |
| status = qla4xxx_get_default_ddb(ha, options, fw_ddb_entry_dma); |
| if (status == QLA_ERROR) { |
| rval = -EINVAL; |
| goto exit_set_param; |
| } |
| |
| ptid = (uint16_t *)&fw_ddb_entry->isid[1]; |
| *ptid = cpu_to_le16((uint16_t)ddb_entry->sess->target_id); |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, "ISID [%02x%02x%02x%02x%02x%02x]\n", |
| fw_ddb_entry->isid[5], fw_ddb_entry->isid[4], |
| fw_ddb_entry->isid[3], fw_ddb_entry->isid[2], |
| fw_ddb_entry->isid[1], fw_ddb_entry->isid[0])); |
| |
| iscsi_opts = le16_to_cpu(fw_ddb_entry->iscsi_options); |
| memset(fw_ddb_entry->iscsi_alias, 0, sizeof(fw_ddb_entry->iscsi_alias)); |
| |
| memset(fw_ddb_entry->iscsi_name, 0, sizeof(fw_ddb_entry->iscsi_name)); |
| |
| if (sess->targetname != NULL) { |
| memcpy(fw_ddb_entry->iscsi_name, sess->targetname, |
| min(strlen(sess->targetname), |
| sizeof(fw_ddb_entry->iscsi_name))); |
| } |
| |
| memset(fw_ddb_entry->ip_addr, 0, sizeof(fw_ddb_entry->ip_addr)); |
| memset(fw_ddb_entry->tgt_addr, 0, sizeof(fw_ddb_entry->tgt_addr)); |
| |
| fw_ddb_entry->options = DDB_OPT_TARGET | DDB_OPT_AUTO_SENDTGTS_DISABLE; |
| |
| if (dst_addr->sa_family == AF_INET) { |
| addr = (struct sockaddr_in *)dst_addr; |
| ip = (char *)&addr->sin_addr; |
| memcpy(fw_ddb_entry->ip_addr, ip, IP_ADDR_LEN); |
| fw_ddb_entry->port = cpu_to_le16(ntohs(addr->sin_port)); |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: Destination Address [%pI4]: index [%d]\n", |
| __func__, fw_ddb_entry->ip_addr, |
| ddb_entry->fw_ddb_index)); |
| } else if (dst_addr->sa_family == AF_INET6) { |
| addr6 = (struct sockaddr_in6 *)dst_addr; |
| ip = (char *)&addr6->sin6_addr; |
| memcpy(fw_ddb_entry->ip_addr, ip, IPv6_ADDR_LEN); |
| fw_ddb_entry->port = cpu_to_le16(ntohs(addr6->sin6_port)); |
| fw_ddb_entry->options |= DDB_OPT_IPV6_DEVICE; |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: Destination Address [%pI6]: index [%d]\n", |
| __func__, fw_ddb_entry->ip_addr, |
| ddb_entry->fw_ddb_index)); |
| } else { |
| ql4_printk(KERN_ERR, ha, |
| "%s: Failed to get IP Address\n", |
| __func__); |
| rval = -EINVAL; |
| goto exit_set_param; |
| } |
| |
| /* CHAP */ |
| if (sess->username != NULL && sess->password != NULL) { |
| if (strlen(sess->username) && strlen(sess->password)) { |
| iscsi_opts |= BIT_7; |
| |
| rval = qla4xxx_get_chap_index(ha, sess->username, |
| sess->password, |
| LOCAL_CHAP, &idx); |
| if (rval) |
| goto exit_set_param; |
| |
| fw_ddb_entry->chap_tbl_idx = cpu_to_le16(idx); |
| } |
| } |
| |
| if (sess->username_in != NULL && sess->password_in != NULL) { |
| /* Check if BIDI CHAP */ |
| if (strlen(sess->username_in) && strlen(sess->password_in)) { |
| iscsi_opts |= BIT_4; |
| |
| rval = qla4xxx_get_chap_index(ha, sess->username_in, |
| sess->password_in, |
| BIDI_CHAP, &idx); |
| if (rval) |
| goto exit_set_param; |
| } |
| } |
| |
| if (sess->initial_r2t_en) |
| iscsi_opts |= BIT_10; |
| |
| if (sess->imm_data_en) |
| iscsi_opts |= BIT_11; |
| |
| fw_ddb_entry->iscsi_options = cpu_to_le16(iscsi_opts); |
| |
| if (conn->max_recv_dlength) |
| fw_ddb_entry->iscsi_max_rcv_data_seg_len = |
| __constant_cpu_to_le16((conn->max_recv_dlength / BYTE_UNITS)); |
| |
| if (sess->max_r2t) |
| fw_ddb_entry->iscsi_max_outsnd_r2t = cpu_to_le16(sess->max_r2t); |
| |
| if (sess->first_burst) |
| fw_ddb_entry->iscsi_first_burst_len = |
| __constant_cpu_to_le16((sess->first_burst / BYTE_UNITS)); |
| |
| if (sess->max_burst) |
| fw_ddb_entry->iscsi_max_burst_len = |
| __constant_cpu_to_le16((sess->max_burst / BYTE_UNITS)); |
| |
| if (sess->time2wait) |
| fw_ddb_entry->iscsi_def_time2wait = |
| cpu_to_le16(sess->time2wait); |
| |
| if (sess->time2retain) |
| fw_ddb_entry->iscsi_def_time2retain = |
| cpu_to_le16(sess->time2retain); |
| |
| status = qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index, |
| fw_ddb_entry_dma, mbx_sts); |
| |
| if (status != QLA_SUCCESS) |
| rval = -EINVAL; |
| exit_set_param: |
| dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), |
| fw_ddb_entry, fw_ddb_entry_dma); |
| exit_set_param_no_free: |
| return rval; |
| } |
| |
| int qla4xxx_get_mgmt_data(struct scsi_qla_host *ha, uint16_t fw_ddb_index, |
| uint16_t stats_size, dma_addr_t stats_dma) |
| { |
| int status = QLA_SUCCESS; |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| |
| memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT); |
| memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT); |
| mbox_cmd[0] = MBOX_CMD_GET_MANAGEMENT_DATA; |
| mbox_cmd[1] = fw_ddb_index; |
| mbox_cmd[2] = LSDW(stats_dma); |
| mbox_cmd[3] = MSDW(stats_dma); |
| mbox_cmd[4] = stats_size; |
| |
| status = qla4xxx_mailbox_command(ha, 5, 1, &mbox_cmd[0], &mbox_sts[0]); |
| if (status != QLA_SUCCESS) { |
| DEBUG2(ql4_printk(KERN_WARNING, ha, |
| "%s: MBOX_CMD_GET_MANAGEMENT_DATA " |
| "failed w/ status %04X\n", __func__, |
| mbox_sts[0])); |
| } |
| return status; |
| } |
| |
| int qla4xxx_get_ip_state(struct scsi_qla_host *ha, uint32_t acb_idx, |
| uint32_t ip_idx, uint32_t *sts) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| int status = QLA_SUCCESS; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| mbox_cmd[0] = MBOX_CMD_GET_IP_ADDR_STATE; |
| mbox_cmd[1] = acb_idx; |
| mbox_cmd[2] = ip_idx; |
| |
| status = qla4xxx_mailbox_command(ha, 3, 8, &mbox_cmd[0], &mbox_sts[0]); |
| if (status != QLA_SUCCESS) { |
| DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: " |
| "MBOX_CMD_GET_IP_ADDR_STATE failed w/ " |
| "status %04X\n", __func__, mbox_sts[0])); |
| } |
| memcpy(sts, mbox_sts, sizeof(mbox_sts)); |
| return status; |
| } |
| |
| int qla4xxx_get_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma, |
| uint32_t offset, uint32_t size) |
| { |
| int status = QLA_SUCCESS; |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_GET_NVRAM; |
| mbox_cmd[1] = LSDW(nvram_dma); |
| mbox_cmd[2] = MSDW(nvram_dma); |
| mbox_cmd[3] = offset; |
| mbox_cmd[4] = size; |
| |
| status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], |
| &mbox_sts[0]); |
| if (status != QLA_SUCCESS) { |
| DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed " |
| "status %04X\n", ha->host_no, __func__, |
| mbox_sts[0])); |
| } |
| return status; |
| } |
| |
| int qla4xxx_set_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma, |
| uint32_t offset, uint32_t size) |
| { |
| int status = QLA_SUCCESS; |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_SET_NVRAM; |
| mbox_cmd[1] = LSDW(nvram_dma); |
| mbox_cmd[2] = MSDW(nvram_dma); |
| mbox_cmd[3] = offset; |
| mbox_cmd[4] = size; |
| |
| status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], |
| &mbox_sts[0]); |
| if (status != QLA_SUCCESS) { |
| DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed " |
| "status %04X\n", ha->host_no, __func__, |
| mbox_sts[0])); |
| } |
| return status; |
| } |
| |
| int qla4xxx_restore_factory_defaults(struct scsi_qla_host *ha, |
| uint32_t region, uint32_t field0, |
| uint32_t field1) |
| { |
| int status = QLA_SUCCESS; |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_RESTORE_FACTORY_DEFAULTS; |
| mbox_cmd[3] = region; |
| mbox_cmd[4] = field0; |
| mbox_cmd[5] = field1; |
| |
| status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 3, &mbox_cmd[0], |
| &mbox_sts[0]); |
| if (status != QLA_SUCCESS) { |
| DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed " |
| "status %04X\n", ha->host_no, __func__, |
| mbox_sts[0])); |
| } |
| return status; |
| } |
| |
| /** |
| * qla4_8xxx_set_param - set driver version in firmware. |
| * @ha: Pointer to host adapter structure. |
| * @param: Parameter to set i.e driver version |
| **/ |
| int qla4_8xxx_set_param(struct scsi_qla_host *ha, int param) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| uint32_t status; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_SET_PARAM; |
| if (param == SET_DRVR_VERSION) { |
| mbox_cmd[1] = SET_DRVR_VERSION; |
| strncpy((char *)&mbox_cmd[2], QLA4XXX_DRIVER_VERSION, |
| MAX_DRVR_VER_LEN); |
| } else { |
| ql4_printk(KERN_ERR, ha, "%s: invalid parameter 0x%x\n", |
| __func__, param); |
| status = QLA_ERROR; |
| goto exit_set_param; |
| } |
| |
| status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, mbox_cmd, |
| mbox_sts); |
| if (status == QLA_ERROR) |
| ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n", |
| __func__, mbox_sts[0]); |
| |
| exit_set_param: |
| return status; |
| } |
| |
| /** |
| * qla4_83xx_post_idc_ack - post IDC ACK |
| * @ha: Pointer to host adapter structure. |
| * |
| * Posts IDC ACK for IDC Request Notification AEN. |
| **/ |
| int qla4_83xx_post_idc_ack(struct scsi_qla_host *ha) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| int status; |
| |
| memset(&mbox_cmd, 0, sizeof(mbox_cmd)); |
| memset(&mbox_sts, 0, sizeof(mbox_sts)); |
| |
| mbox_cmd[0] = MBOX_CMD_IDC_ACK; |
| mbox_cmd[1] = ha->idc_info.request_desc; |
| mbox_cmd[2] = ha->idc_info.info1; |
| mbox_cmd[3] = ha->idc_info.info2; |
| mbox_cmd[4] = ha->idc_info.info3; |
| |
| status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, MBOX_REG_COUNT, |
| mbox_cmd, mbox_sts); |
| if (status == QLA_ERROR) |
| ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n", __func__, |
| mbox_sts[0]); |
| else |
| ql4_printk(KERN_INFO, ha, "%s: IDC ACK posted\n", __func__); |
| |
| return status; |
| } |
| |
| int qla4_84xx_config_acb(struct scsi_qla_host *ha, int acb_config) |
| { |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| struct addr_ctrl_blk *acb = NULL; |
| uint32_t acb_len = sizeof(struct addr_ctrl_blk); |
| int rval = QLA_SUCCESS; |
| dma_addr_t acb_dma; |
| |
| acb = dma_alloc_coherent(&ha->pdev->dev, |
| sizeof(struct addr_ctrl_blk), |
| &acb_dma, GFP_KERNEL); |
| if (!acb) { |
| ql4_printk(KERN_ERR, ha, "%s: Unable to alloc acb\n", __func__); |
| rval = QLA_ERROR; |
| goto exit_config_acb; |
| } |
| memset(acb, 0, acb_len); |
| |
| switch (acb_config) { |
| case ACB_CONFIG_DISABLE: |
| rval = qla4xxx_get_acb(ha, acb_dma, 0, acb_len); |
| if (rval != QLA_SUCCESS) |
| goto exit_free_acb; |
| |
| rval = qla4xxx_disable_acb(ha); |
| if (rval != QLA_SUCCESS) |
| goto exit_free_acb; |
| |
| if (!ha->saved_acb) |
| ha->saved_acb = kzalloc(acb_len, GFP_KERNEL); |
| |
| if (!ha->saved_acb) { |
| ql4_printk(KERN_ERR, ha, "%s: Unable to alloc acb\n", |
| __func__); |
| rval = QLA_ERROR; |
| goto exit_config_acb; |
| } |
| memcpy(ha->saved_acb, acb, acb_len); |
| break; |
| case ACB_CONFIG_SET: |
| |
| if (!ha->saved_acb) { |
| ql4_printk(KERN_ERR, ha, "%s: Can't set ACB, Saved ACB not available\n", |
| __func__); |
| rval = QLA_ERROR; |
| goto exit_free_acb; |
| } |
| |
| memcpy(acb, ha->saved_acb, acb_len); |
| kfree(ha->saved_acb); |
| ha->saved_acb = NULL; |
| |
| rval = qla4xxx_set_acb(ha, &mbox_cmd[0], &mbox_sts[0], acb_dma); |
| if (rval != QLA_SUCCESS) |
| goto exit_free_acb; |
| |
| break; |
| default: |
| ql4_printk(KERN_ERR, ha, "%s: Invalid ACB Configuration\n", |
| __func__); |
| } |
| |
| exit_free_acb: |
| dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk), acb, |
| acb_dma); |
| exit_config_acb: |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s %s\n", __func__, |
| rval == QLA_SUCCESS ? "SUCCEEDED" : "FAILED")); |
| return rval; |
| } |