| /* |
| * drivers/dma/fsl_raid.c |
| * |
| * Freescale RAID Engine device driver |
| * |
| * Author: |
| * Harninder Rai <harninder.rai@freescale.com> |
| * Naveen Burmi <naveenburmi@freescale.com> |
| * |
| * Rewrite: |
| * Xuelin Shi <xuelin.shi@freescale.com> |
| * |
| * Copyright (c) 2010-2014 Freescale Semiconductor, Inc. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Freescale Semiconductor nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") as published by the Free Software |
| * Foundation, either version 2 of that License or (at your option) any |
| * later version. |
| * |
| * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Theory of operation: |
| * |
| * General capabilities: |
| * RAID Engine (RE) block is capable of offloading XOR, memcpy and P/Q |
| * calculations required in RAID5 and RAID6 operations. RE driver |
| * registers with Linux's ASYNC layer as dma driver. RE hardware |
| * maintains strict ordering of the requests through chained |
| * command queueing. |
| * |
| * Data flow: |
| * Software RAID layer of Linux (MD layer) maintains RAID partitions, |
| * strips, stripes etc. It sends requests to the underlying ASYNC layer |
| * which further passes it to RE driver. ASYNC layer decides which request |
| * goes to which job ring of RE hardware. For every request processed by |
| * RAID Engine, driver gets an interrupt unless coalescing is set. The |
| * per job ring interrupt handler checks the status register for errors, |
| * clears the interrupt and leave the post interrupt processing to the irq |
| * thread. |
| */ |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_address.h> |
| #include <linux/of_platform.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmapool.h> |
| #include <linux/dmaengine.h> |
| #include <linux/io.h> |
| #include <linux/spinlock.h> |
| #include <linux/slab.h> |
| |
| #include "dmaengine.h" |
| #include "fsl_raid.h" |
| |
| #define FSL_RE_MAX_XOR_SRCS 16 |
| #define FSL_RE_MAX_PQ_SRCS 16 |
| #define FSL_RE_MIN_DESCS 256 |
| #define FSL_RE_MAX_DESCS (4 * FSL_RE_MIN_DESCS) |
| #define FSL_RE_FRAME_FORMAT 0x1 |
| #define FSL_RE_MAX_DATA_LEN (1024*1024) |
| |
| #define to_fsl_re_dma_desc(tx) container_of(tx, struct fsl_re_desc, async_tx) |
| |
| /* Add descriptors into per chan software queue - submit_q */ |
| static dma_cookie_t fsl_re_tx_submit(struct dma_async_tx_descriptor *tx) |
| { |
| struct fsl_re_desc *desc; |
| struct fsl_re_chan *re_chan; |
| dma_cookie_t cookie; |
| unsigned long flags; |
| |
| desc = to_fsl_re_dma_desc(tx); |
| re_chan = container_of(tx->chan, struct fsl_re_chan, chan); |
| |
| spin_lock_irqsave(&re_chan->desc_lock, flags); |
| cookie = dma_cookie_assign(tx); |
| list_add_tail(&desc->node, &re_chan->submit_q); |
| spin_unlock_irqrestore(&re_chan->desc_lock, flags); |
| |
| return cookie; |
| } |
| |
| /* Copy descriptor from per chan software queue into hardware job ring */ |
| static void fsl_re_issue_pending(struct dma_chan *chan) |
| { |
| struct fsl_re_chan *re_chan; |
| int avail; |
| struct fsl_re_desc *desc, *_desc; |
| unsigned long flags; |
| |
| re_chan = container_of(chan, struct fsl_re_chan, chan); |
| |
| spin_lock_irqsave(&re_chan->desc_lock, flags); |
| avail = FSL_RE_SLOT_AVAIL( |
| in_be32(&re_chan->jrregs->inbring_slot_avail)); |
| |
| list_for_each_entry_safe(desc, _desc, &re_chan->submit_q, node) { |
| if (!avail) |
| break; |
| |
| list_move_tail(&desc->node, &re_chan->active_q); |
| |
| memcpy(&re_chan->inb_ring_virt_addr[re_chan->inb_count], |
| &desc->hwdesc, sizeof(struct fsl_re_hw_desc)); |
| |
| re_chan->inb_count = (re_chan->inb_count + 1) & |
| FSL_RE_RING_SIZE_MASK; |
| out_be32(&re_chan->jrregs->inbring_add_job, FSL_RE_ADD_JOB(1)); |
| avail--; |
| } |
| spin_unlock_irqrestore(&re_chan->desc_lock, flags); |
| } |
| |
| static void fsl_re_desc_done(struct fsl_re_desc *desc) |
| { |
| dma_async_tx_callback callback; |
| void *callback_param; |
| |
| dma_cookie_complete(&desc->async_tx); |
| |
| callback = desc->async_tx.callback; |
| callback_param = desc->async_tx.callback_param; |
| if (callback) |
| callback(callback_param); |
| |
| dma_descriptor_unmap(&desc->async_tx); |
| } |
| |
| static void fsl_re_cleanup_descs(struct fsl_re_chan *re_chan) |
| { |
| struct fsl_re_desc *desc, *_desc; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&re_chan->desc_lock, flags); |
| list_for_each_entry_safe(desc, _desc, &re_chan->ack_q, node) { |
| if (async_tx_test_ack(&desc->async_tx)) |
| list_move_tail(&desc->node, &re_chan->free_q); |
| } |
| spin_unlock_irqrestore(&re_chan->desc_lock, flags); |
| |
| fsl_re_issue_pending(&re_chan->chan); |
| } |
| |
| static void fsl_re_dequeue(unsigned long data) |
| { |
| struct fsl_re_chan *re_chan; |
| struct fsl_re_desc *desc, *_desc; |
| struct fsl_re_hw_desc *hwdesc; |
| unsigned long flags; |
| unsigned int count, oub_count; |
| int found; |
| |
| re_chan = dev_get_drvdata((struct device *)data); |
| |
| fsl_re_cleanup_descs(re_chan); |
| |
| spin_lock_irqsave(&re_chan->desc_lock, flags); |
| count = FSL_RE_SLOT_FULL(in_be32(&re_chan->jrregs->oubring_slot_full)); |
| while (count--) { |
| found = 0; |
| hwdesc = &re_chan->oub_ring_virt_addr[re_chan->oub_count]; |
| list_for_each_entry_safe(desc, _desc, &re_chan->active_q, |
| node) { |
| /* compare the hw dma addr to find the completed */ |
| if (desc->hwdesc.lbea32 == hwdesc->lbea32 && |
| desc->hwdesc.addr_low == hwdesc->addr_low) { |
| found = 1; |
| break; |
| } |
| } |
| |
| if (found) { |
| fsl_re_desc_done(desc); |
| list_move_tail(&desc->node, &re_chan->ack_q); |
| } else { |
| dev_err(re_chan->dev, |
| "found hwdesc not in sw queue, discard it\n"); |
| } |
| |
| oub_count = (re_chan->oub_count + 1) & FSL_RE_RING_SIZE_MASK; |
| re_chan->oub_count = oub_count; |
| |
| out_be32(&re_chan->jrregs->oubring_job_rmvd, |
| FSL_RE_RMVD_JOB(1)); |
| } |
| spin_unlock_irqrestore(&re_chan->desc_lock, flags); |
| } |
| |
| /* Per Job Ring interrupt handler */ |
| static irqreturn_t fsl_re_isr(int irq, void *data) |
| { |
| struct fsl_re_chan *re_chan; |
| u32 irqstate, status; |
| |
| re_chan = dev_get_drvdata((struct device *)data); |
| |
| irqstate = in_be32(&re_chan->jrregs->jr_interrupt_status); |
| if (!irqstate) |
| return IRQ_NONE; |
| |
| /* |
| * There's no way in upper layer (read MD layer) to recover from |
| * error conditions except restart everything. In long term we |
| * need to do something more than just crashing |
| */ |
| if (irqstate & FSL_RE_ERROR) { |
| status = in_be32(&re_chan->jrregs->jr_status); |
| dev_err(re_chan->dev, "chan error irqstate: %x, status: %x\n", |
| irqstate, status); |
| } |
| |
| /* Clear interrupt */ |
| out_be32(&re_chan->jrregs->jr_interrupt_status, FSL_RE_CLR_INTR); |
| |
| tasklet_schedule(&re_chan->irqtask); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static enum dma_status fsl_re_tx_status(struct dma_chan *chan, |
| dma_cookie_t cookie, |
| struct dma_tx_state *txstate) |
| { |
| return dma_cookie_status(chan, cookie, txstate); |
| } |
| |
| static void fill_cfd_frame(struct fsl_re_cmpnd_frame *cf, u8 index, |
| size_t length, dma_addr_t addr, bool final) |
| { |
| u32 efrl = length & FSL_RE_CF_LENGTH_MASK; |
| |
| efrl |= final << FSL_RE_CF_FINAL_SHIFT; |
| cf[index].efrl32 = efrl; |
| cf[index].addr_high = upper_32_bits(addr); |
| cf[index].addr_low = lower_32_bits(addr); |
| } |
| |
| static struct fsl_re_desc *fsl_re_init_desc(struct fsl_re_chan *re_chan, |
| struct fsl_re_desc *desc, |
| void *cf, dma_addr_t paddr) |
| { |
| desc->re_chan = re_chan; |
| desc->async_tx.tx_submit = fsl_re_tx_submit; |
| dma_async_tx_descriptor_init(&desc->async_tx, &re_chan->chan); |
| INIT_LIST_HEAD(&desc->node); |
| |
| desc->hwdesc.fmt32 = FSL_RE_FRAME_FORMAT << FSL_RE_HWDESC_FMT_SHIFT; |
| desc->hwdesc.lbea32 = upper_32_bits(paddr); |
| desc->hwdesc.addr_low = lower_32_bits(paddr); |
| desc->cf_addr = cf; |
| desc->cf_paddr = paddr; |
| |
| desc->cdb_addr = (void *)(cf + FSL_RE_CF_DESC_SIZE); |
| desc->cdb_paddr = paddr + FSL_RE_CF_DESC_SIZE; |
| |
| return desc; |
| } |
| |
| static struct fsl_re_desc *fsl_re_chan_alloc_desc(struct fsl_re_chan *re_chan, |
| unsigned long flags) |
| { |
| struct fsl_re_desc *desc = NULL; |
| void *cf; |
| dma_addr_t paddr; |
| unsigned long lock_flag; |
| |
| fsl_re_cleanup_descs(re_chan); |
| |
| spin_lock_irqsave(&re_chan->desc_lock, lock_flag); |
| if (!list_empty(&re_chan->free_q)) { |
| /* take one desc from free_q */ |
| desc = list_first_entry(&re_chan->free_q, |
| struct fsl_re_desc, node); |
| list_del(&desc->node); |
| |
| desc->async_tx.flags = flags; |
| } |
| spin_unlock_irqrestore(&re_chan->desc_lock, lock_flag); |
| |
| if (!desc) { |
| desc = kzalloc(sizeof(*desc), GFP_NOWAIT); |
| if (!desc) |
| return NULL; |
| |
| cf = dma_pool_alloc(re_chan->re_dev->cf_desc_pool, GFP_NOWAIT, |
| &paddr); |
| if (!cf) { |
| kfree(desc); |
| return NULL; |
| } |
| |
| desc = fsl_re_init_desc(re_chan, desc, cf, paddr); |
| desc->async_tx.flags = flags; |
| |
| spin_lock_irqsave(&re_chan->desc_lock, lock_flag); |
| re_chan->alloc_count++; |
| spin_unlock_irqrestore(&re_chan->desc_lock, lock_flag); |
| } |
| |
| return desc; |
| } |
| |
| static struct dma_async_tx_descriptor *fsl_re_prep_dma_genq( |
| struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src, |
| unsigned int src_cnt, const unsigned char *scf, size_t len, |
| unsigned long flags) |
| { |
| struct fsl_re_chan *re_chan; |
| struct fsl_re_desc *desc; |
| struct fsl_re_xor_cdb *xor; |
| struct fsl_re_cmpnd_frame *cf; |
| u32 cdb; |
| unsigned int i, j; |
| unsigned int save_src_cnt = src_cnt; |
| int cont_q = 0; |
| |
| re_chan = container_of(chan, struct fsl_re_chan, chan); |
| if (len > FSL_RE_MAX_DATA_LEN) { |
| dev_err(re_chan->dev, "genq tx length %zu, max length %d\n", |
| len, FSL_RE_MAX_DATA_LEN); |
| return NULL; |
| } |
| |
| desc = fsl_re_chan_alloc_desc(re_chan, flags); |
| if (desc <= 0) |
| return NULL; |
| |
| if (scf && (flags & DMA_PREP_CONTINUE)) { |
| cont_q = 1; |
| src_cnt += 1; |
| } |
| |
| /* Filling xor CDB */ |
| cdb = FSL_RE_XOR_OPCODE << FSL_RE_CDB_OPCODE_SHIFT; |
| cdb |= (src_cnt - 1) << FSL_RE_CDB_NRCS_SHIFT; |
| cdb |= FSL_RE_BLOCK_SIZE << FSL_RE_CDB_BLKSIZE_SHIFT; |
| cdb |= FSL_RE_INTR_ON_ERROR << FSL_RE_CDB_ERROR_SHIFT; |
| cdb |= FSL_RE_DATA_DEP << FSL_RE_CDB_DEPEND_SHIFT; |
| xor = desc->cdb_addr; |
| xor->cdb32 = cdb; |
| |
| if (scf) { |
| /* compute q = src0*coef0^src1*coef1^..., * is GF(8) mult */ |
| for (i = 0; i < save_src_cnt; i++) |
| xor->gfm[i] = scf[i]; |
| if (cont_q) |
| xor->gfm[i++] = 1; |
| } else { |
| /* compute P, that is XOR all srcs */ |
| for (i = 0; i < src_cnt; i++) |
| xor->gfm[i] = 1; |
| } |
| |
| /* Filling frame 0 of compound frame descriptor with CDB */ |
| cf = desc->cf_addr; |
| fill_cfd_frame(cf, 0, sizeof(*xor), desc->cdb_paddr, 0); |
| |
| /* Fill CFD's 1st frame with dest buffer */ |
| fill_cfd_frame(cf, 1, len, dest, 0); |
| |
| /* Fill CFD's rest of the frames with source buffers */ |
| for (i = 2, j = 0; j < save_src_cnt; i++, j++) |
| fill_cfd_frame(cf, i, len, src[j], 0); |
| |
| if (cont_q) |
| fill_cfd_frame(cf, i++, len, dest, 0); |
| |
| /* Setting the final bit in the last source buffer frame in CFD */ |
| cf[i - 1].efrl32 |= 1 << FSL_RE_CF_FINAL_SHIFT; |
| |
| return &desc->async_tx; |
| } |
| |
| /* |
| * Prep function for P parity calculation.In RAID Engine terminology, |
| * XOR calculation is called GenQ calculation done through GenQ command |
| */ |
| static struct dma_async_tx_descriptor *fsl_re_prep_dma_xor( |
| struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src, |
| unsigned int src_cnt, size_t len, unsigned long flags) |
| { |
| /* NULL let genq take all coef as 1 */ |
| return fsl_re_prep_dma_genq(chan, dest, src, src_cnt, NULL, len, flags); |
| } |
| |
| /* |
| * Prep function for P/Q parity calculation.In RAID Engine terminology, |
| * P/Q calculation is called GenQQ done through GenQQ command |
| */ |
| static struct dma_async_tx_descriptor *fsl_re_prep_dma_pq( |
| struct dma_chan *chan, dma_addr_t *dest, dma_addr_t *src, |
| unsigned int src_cnt, const unsigned char *scf, size_t len, |
| unsigned long flags) |
| { |
| struct fsl_re_chan *re_chan; |
| struct fsl_re_desc *desc; |
| struct fsl_re_pq_cdb *pq; |
| struct fsl_re_cmpnd_frame *cf; |
| u32 cdb; |
| u8 *p; |
| int gfmq_len, i, j; |
| unsigned int save_src_cnt = src_cnt; |
| |
| re_chan = container_of(chan, struct fsl_re_chan, chan); |
| if (len > FSL_RE_MAX_DATA_LEN) { |
| dev_err(re_chan->dev, "pq tx length is %zu, max length is %d\n", |
| len, FSL_RE_MAX_DATA_LEN); |
| return NULL; |
| } |
| |
| /* |
| * RE requires at least 2 sources, if given only one source, we pass the |
| * second source same as the first one. |
| * With only one source, generating P is meaningless, only generate Q. |
| */ |
| if (src_cnt == 1) { |
| struct dma_async_tx_descriptor *tx; |
| dma_addr_t dma_src[2]; |
| unsigned char coef[2]; |
| |
| dma_src[0] = *src; |
| coef[0] = *scf; |
| dma_src[1] = *src; |
| coef[1] = 0; |
| tx = fsl_re_prep_dma_genq(chan, dest[1], dma_src, 2, coef, len, |
| flags); |
| if (tx) |
| desc = to_fsl_re_dma_desc(tx); |
| |
| return tx; |
| } |
| |
| /* |
| * During RAID6 array creation, Linux's MD layer gets P and Q |
| * calculated separately in two steps. But our RAID Engine has |
| * the capability to calculate both P and Q with a single command |
| * Hence to merge well with MD layer, we need to provide a hook |
| * here and call re_jq_prep_dma_genq() function |
| */ |
| |
| if (flags & DMA_PREP_PQ_DISABLE_P) |
| return fsl_re_prep_dma_genq(chan, dest[1], src, src_cnt, |
| scf, len, flags); |
| |
| if (flags & DMA_PREP_CONTINUE) |
| src_cnt += 3; |
| |
| desc = fsl_re_chan_alloc_desc(re_chan, flags); |
| if (desc <= 0) |
| return NULL; |
| |
| /* Filling GenQQ CDB */ |
| cdb = FSL_RE_PQ_OPCODE << FSL_RE_CDB_OPCODE_SHIFT; |
| cdb |= (src_cnt - 1) << FSL_RE_CDB_NRCS_SHIFT; |
| cdb |= FSL_RE_BLOCK_SIZE << FSL_RE_CDB_BLKSIZE_SHIFT; |
| cdb |= FSL_RE_BUFFER_OUTPUT << FSL_RE_CDB_BUFFER_SHIFT; |
| cdb |= FSL_RE_DATA_DEP << FSL_RE_CDB_DEPEND_SHIFT; |
| |
| pq = desc->cdb_addr; |
| pq->cdb32 = cdb; |
| |
| p = pq->gfm_q1; |
| /* Init gfm_q1[] */ |
| for (i = 0; i < src_cnt; i++) |
| p[i] = 1; |
| |
| /* Align gfm[] to 32bit */ |
| gfmq_len = ALIGN(src_cnt, 4); |
| |
| /* Init gfm_q2[] */ |
| p += gfmq_len; |
| for (i = 0; i < src_cnt; i++) |
| p[i] = scf[i]; |
| |
| /* Filling frame 0 of compound frame descriptor with CDB */ |
| cf = desc->cf_addr; |
| fill_cfd_frame(cf, 0, sizeof(struct fsl_re_pq_cdb), desc->cdb_paddr, 0); |
| |
| /* Fill CFD's 1st & 2nd frame with dest buffers */ |
| for (i = 1, j = 0; i < 3; i++, j++) |
| fill_cfd_frame(cf, i, len, dest[j], 0); |
| |
| /* Fill CFD's rest of the frames with source buffers */ |
| for (i = 3, j = 0; j < save_src_cnt; i++, j++) |
| fill_cfd_frame(cf, i, len, src[j], 0); |
| |
| /* PQ computation continuation */ |
| if (flags & DMA_PREP_CONTINUE) { |
| if (src_cnt - save_src_cnt == 3) { |
| p[save_src_cnt] = 0; |
| p[save_src_cnt + 1] = 0; |
| p[save_src_cnt + 2] = 1; |
| fill_cfd_frame(cf, i++, len, dest[0], 0); |
| fill_cfd_frame(cf, i++, len, dest[1], 0); |
| fill_cfd_frame(cf, i++, len, dest[1], 0); |
| } else { |
| dev_err(re_chan->dev, "PQ tx continuation error!\n"); |
| return NULL; |
| } |
| } |
| |
| /* Setting the final bit in the last source buffer frame in CFD */ |
| cf[i - 1].efrl32 |= 1 << FSL_RE_CF_FINAL_SHIFT; |
| |
| return &desc->async_tx; |
| } |
| |
| /* |
| * Prep function for memcpy. In RAID Engine, memcpy is done through MOVE |
| * command. Logic of this function will need to be modified once multipage |
| * support is added in Linux's MD/ASYNC Layer |
| */ |
| static struct dma_async_tx_descriptor *fsl_re_prep_dma_memcpy( |
| struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, |
| size_t len, unsigned long flags) |
| { |
| struct fsl_re_chan *re_chan; |
| struct fsl_re_desc *desc; |
| size_t length; |
| struct fsl_re_cmpnd_frame *cf; |
| struct fsl_re_move_cdb *move; |
| u32 cdb; |
| |
| re_chan = container_of(chan, struct fsl_re_chan, chan); |
| |
| if (len > FSL_RE_MAX_DATA_LEN) { |
| dev_err(re_chan->dev, "cp tx length is %zu, max length is %d\n", |
| len, FSL_RE_MAX_DATA_LEN); |
| return NULL; |
| } |
| |
| desc = fsl_re_chan_alloc_desc(re_chan, flags); |
| if (desc <= 0) |
| return NULL; |
| |
| /* Filling move CDB */ |
| cdb = FSL_RE_MOVE_OPCODE << FSL_RE_CDB_OPCODE_SHIFT; |
| cdb |= FSL_RE_BLOCK_SIZE << FSL_RE_CDB_BLKSIZE_SHIFT; |
| cdb |= FSL_RE_INTR_ON_ERROR << FSL_RE_CDB_ERROR_SHIFT; |
| cdb |= FSL_RE_DATA_DEP << FSL_RE_CDB_DEPEND_SHIFT; |
| |
| move = desc->cdb_addr; |
| move->cdb32 = cdb; |
| |
| /* Filling frame 0 of CFD with move CDB */ |
| cf = desc->cf_addr; |
| fill_cfd_frame(cf, 0, sizeof(*move), desc->cdb_paddr, 0); |
| |
| length = min_t(size_t, len, FSL_RE_MAX_DATA_LEN); |
| |
| /* Fill CFD's 1st frame with dest buffer */ |
| fill_cfd_frame(cf, 1, length, dest, 0); |
| |
| /* Fill CFD's 2nd frame with src buffer */ |
| fill_cfd_frame(cf, 2, length, src, 1); |
| |
| return &desc->async_tx; |
| } |
| |
| static int fsl_re_alloc_chan_resources(struct dma_chan *chan) |
| { |
| struct fsl_re_chan *re_chan; |
| struct fsl_re_desc *desc; |
| void *cf; |
| dma_addr_t paddr; |
| int i; |
| |
| re_chan = container_of(chan, struct fsl_re_chan, chan); |
| for (i = 0; i < FSL_RE_MIN_DESCS; i++) { |
| desc = kzalloc(sizeof(*desc), GFP_KERNEL); |
| if (!desc) |
| break; |
| |
| cf = dma_pool_alloc(re_chan->re_dev->cf_desc_pool, GFP_KERNEL, |
| &paddr); |
| if (!cf) { |
| kfree(desc); |
| break; |
| } |
| |
| INIT_LIST_HEAD(&desc->node); |
| fsl_re_init_desc(re_chan, desc, cf, paddr); |
| |
| list_add_tail(&desc->node, &re_chan->free_q); |
| re_chan->alloc_count++; |
| } |
| return re_chan->alloc_count; |
| } |
| |
| static void fsl_re_free_chan_resources(struct dma_chan *chan) |
| { |
| struct fsl_re_chan *re_chan; |
| struct fsl_re_desc *desc; |
| |
| re_chan = container_of(chan, struct fsl_re_chan, chan); |
| while (re_chan->alloc_count--) { |
| desc = list_first_entry(&re_chan->free_q, |
| struct fsl_re_desc, |
| node); |
| |
| list_del(&desc->node); |
| dma_pool_free(re_chan->re_dev->cf_desc_pool, desc->cf_addr, |
| desc->cf_paddr); |
| kfree(desc); |
| } |
| |
| if (!list_empty(&re_chan->free_q)) |
| dev_err(re_chan->dev, "chan resource cannot be cleaned!\n"); |
| } |
| |
| static int fsl_re_chan_probe(struct platform_device *ofdev, |
| struct device_node *np, u8 q, u32 off) |
| { |
| struct device *dev, *chandev; |
| struct fsl_re_drv_private *re_priv; |
| struct fsl_re_chan *chan; |
| struct dma_device *dma_dev; |
| u32 ptr; |
| u32 status; |
| int ret = 0, rc; |
| struct platform_device *chan_ofdev; |
| |
| dev = &ofdev->dev; |
| re_priv = dev_get_drvdata(dev); |
| dma_dev = &re_priv->dma_dev; |
| |
| chan = devm_kzalloc(dev, sizeof(*chan), GFP_KERNEL); |
| if (!chan) |
| return -ENOMEM; |
| |
| /* create platform device for chan node */ |
| chan_ofdev = of_platform_device_create(np, NULL, dev); |
| if (!chan_ofdev) { |
| dev_err(dev, "Not able to create ofdev for jr %d\n", q); |
| ret = -EINVAL; |
| goto err_free; |
| } |
| |
| /* read reg property from dts */ |
| rc = of_property_read_u32(np, "reg", &ptr); |
| if (rc) { |
| dev_err(dev, "Reg property not found in jr %d\n", q); |
| ret = -ENODEV; |
| goto err_free; |
| } |
| |
| chan->jrregs = (struct fsl_re_chan_cfg *)((u8 *)re_priv->re_regs + |
| off + ptr); |
| |
| /* read irq property from dts */ |
| chan->irq = irq_of_parse_and_map(np, 0); |
| if (chan->irq == NO_IRQ) { |
| dev_err(dev, "No IRQ defined for JR %d\n", q); |
| ret = -ENODEV; |
| goto err_free; |
| } |
| |
| snprintf(chan->name, sizeof(chan->name), "re_jr%02d", q); |
| |
| chandev = &chan_ofdev->dev; |
| tasklet_init(&chan->irqtask, fsl_re_dequeue, (unsigned long)chandev); |
| |
| ret = request_irq(chan->irq, fsl_re_isr, 0, chan->name, chandev); |
| if (ret) { |
| dev_err(dev, "Unable to register interrupt for JR %d\n", q); |
| ret = -EINVAL; |
| goto err_free; |
| } |
| |
| re_priv->re_jrs[q] = chan; |
| chan->chan.device = dma_dev; |
| chan->chan.private = chan; |
| chan->dev = chandev; |
| chan->re_dev = re_priv; |
| |
| spin_lock_init(&chan->desc_lock); |
| INIT_LIST_HEAD(&chan->ack_q); |
| INIT_LIST_HEAD(&chan->active_q); |
| INIT_LIST_HEAD(&chan->submit_q); |
| INIT_LIST_HEAD(&chan->free_q); |
| |
| chan->inb_ring_virt_addr = dma_pool_alloc(chan->re_dev->hw_desc_pool, |
| GFP_KERNEL, &chan->inb_phys_addr); |
| if (!chan->inb_ring_virt_addr) { |
| dev_err(dev, "No dma memory for inb_ring_virt_addr\n"); |
| ret = -ENOMEM; |
| goto err_free; |
| } |
| |
| chan->oub_ring_virt_addr = dma_pool_alloc(chan->re_dev->hw_desc_pool, |
| GFP_KERNEL, &chan->oub_phys_addr); |
| if (!chan->oub_ring_virt_addr) { |
| dev_err(dev, "No dma memory for oub_ring_virt_addr\n"); |
| ret = -ENOMEM; |
| goto err_free_1; |
| } |
| |
| /* Program the Inbound/Outbound ring base addresses and size */ |
| out_be32(&chan->jrregs->inbring_base_h, |
| chan->inb_phys_addr & FSL_RE_ADDR_BIT_MASK); |
| out_be32(&chan->jrregs->oubring_base_h, |
| chan->oub_phys_addr & FSL_RE_ADDR_BIT_MASK); |
| out_be32(&chan->jrregs->inbring_base_l, |
| chan->inb_phys_addr >> FSL_RE_ADDR_BIT_SHIFT); |
| out_be32(&chan->jrregs->oubring_base_l, |
| chan->oub_phys_addr >> FSL_RE_ADDR_BIT_SHIFT); |
| out_be32(&chan->jrregs->inbring_size, |
| FSL_RE_RING_SIZE << FSL_RE_RING_SIZE_SHIFT); |
| out_be32(&chan->jrregs->oubring_size, |
| FSL_RE_RING_SIZE << FSL_RE_RING_SIZE_SHIFT); |
| |
| /* Read LIODN value from u-boot */ |
| status = in_be32(&chan->jrregs->jr_config_1) & FSL_RE_REG_LIODN_MASK; |
| |
| /* Program the CFG reg */ |
| out_be32(&chan->jrregs->jr_config_1, |
| FSL_RE_CFG1_CBSI | FSL_RE_CFG1_CBS0 | status); |
| |
| dev_set_drvdata(chandev, chan); |
| |
| /* Enable RE/CHAN */ |
| out_be32(&chan->jrregs->jr_command, FSL_RE_ENABLE); |
| |
| return 0; |
| |
| err_free_1: |
| dma_pool_free(chan->re_dev->hw_desc_pool, chan->inb_ring_virt_addr, |
| chan->inb_phys_addr); |
| err_free: |
| return ret; |
| } |
| |
| /* Probe function for RAID Engine */ |
| static int fsl_re_probe(struct platform_device *ofdev) |
| { |
| struct fsl_re_drv_private *re_priv; |
| struct device_node *np; |
| struct device_node *child; |
| u32 off; |
| u8 ridx = 0; |
| struct dma_device *dma_dev; |
| struct resource *res; |
| int rc; |
| struct device *dev = &ofdev->dev; |
| |
| re_priv = devm_kzalloc(dev, sizeof(*re_priv), GFP_KERNEL); |
| if (!re_priv) |
| return -ENOMEM; |
| |
| res = platform_get_resource(ofdev, IORESOURCE_MEM, 0); |
| if (!res) |
| return -ENODEV; |
| |
| /* IOMAP the entire RAID Engine region */ |
| re_priv->re_regs = devm_ioremap(dev, res->start, resource_size(res)); |
| if (!re_priv->re_regs) |
| return -EBUSY; |
| |
| /* Program the RE mode */ |
| out_be32(&re_priv->re_regs->global_config, FSL_RE_NON_DPAA_MODE); |
| |
| /* Program Galois Field polynomial */ |
| out_be32(&re_priv->re_regs->galois_field_config, FSL_RE_GFM_POLY); |
| |
| dev_info(dev, "version %x, mode %x, gfp %x\n", |
| in_be32(&re_priv->re_regs->re_version_id), |
| in_be32(&re_priv->re_regs->global_config), |
| in_be32(&re_priv->re_regs->galois_field_config)); |
| |
| dma_dev = &re_priv->dma_dev; |
| dma_dev->dev = dev; |
| INIT_LIST_HEAD(&dma_dev->channels); |
| dma_set_mask(dev, DMA_BIT_MASK(40)); |
| |
| dma_dev->device_alloc_chan_resources = fsl_re_alloc_chan_resources; |
| dma_dev->device_tx_status = fsl_re_tx_status; |
| dma_dev->device_issue_pending = fsl_re_issue_pending; |
| |
| dma_dev->max_xor = FSL_RE_MAX_XOR_SRCS; |
| dma_dev->device_prep_dma_xor = fsl_re_prep_dma_xor; |
| dma_cap_set(DMA_XOR, dma_dev->cap_mask); |
| |
| dma_dev->max_pq = FSL_RE_MAX_PQ_SRCS; |
| dma_dev->device_prep_dma_pq = fsl_re_prep_dma_pq; |
| dma_cap_set(DMA_PQ, dma_dev->cap_mask); |
| |
| dma_dev->device_prep_dma_memcpy = fsl_re_prep_dma_memcpy; |
| dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask); |
| |
| dma_dev->device_free_chan_resources = fsl_re_free_chan_resources; |
| |
| re_priv->total_chans = 0; |
| |
| re_priv->cf_desc_pool = dmam_pool_create("fsl_re_cf_desc_pool", dev, |
| FSL_RE_CF_CDB_SIZE, |
| FSL_RE_CF_CDB_ALIGN, 0); |
| |
| if (!re_priv->cf_desc_pool) { |
| dev_err(dev, "No memory for fsl re_cf desc pool\n"); |
| return -ENOMEM; |
| } |
| |
| re_priv->hw_desc_pool = dmam_pool_create("fsl_re_hw_desc_pool", dev, |
| sizeof(struct fsl_re_hw_desc) * FSL_RE_RING_SIZE, |
| FSL_RE_FRAME_ALIGN, 0); |
| if (!re_priv->hw_desc_pool) { |
| dev_err(dev, "No memory for fsl re_hw desc pool\n"); |
| return -ENOMEM; |
| } |
| |
| dev_set_drvdata(dev, re_priv); |
| |
| /* Parse Device tree to find out the total number of JQs present */ |
| for_each_compatible_node(np, NULL, "fsl,raideng-v1.0-job-queue") { |
| rc = of_property_read_u32(np, "reg", &off); |
| if (rc) { |
| dev_err(dev, "Reg property not found in JQ node\n"); |
| of_node_put(np); |
| return -ENODEV; |
| } |
| /* Find out the Job Rings present under each JQ */ |
| for_each_child_of_node(np, child) { |
| rc = of_device_is_compatible(child, |
| "fsl,raideng-v1.0-job-ring"); |
| if (rc) { |
| fsl_re_chan_probe(ofdev, child, ridx++, off); |
| re_priv->total_chans++; |
| } |
| } |
| } |
| |
| dma_async_device_register(dma_dev); |
| |
| return 0; |
| } |
| |
| static void fsl_re_remove_chan(struct fsl_re_chan *chan) |
| { |
| tasklet_kill(&chan->irqtask); |
| |
| dma_pool_free(chan->re_dev->hw_desc_pool, chan->inb_ring_virt_addr, |
| chan->inb_phys_addr); |
| |
| dma_pool_free(chan->re_dev->hw_desc_pool, chan->oub_ring_virt_addr, |
| chan->oub_phys_addr); |
| } |
| |
| static int fsl_re_remove(struct platform_device *ofdev) |
| { |
| struct fsl_re_drv_private *re_priv; |
| struct device *dev; |
| int i; |
| |
| dev = &ofdev->dev; |
| re_priv = dev_get_drvdata(dev); |
| |
| /* Cleanup chan related memory areas */ |
| for (i = 0; i < re_priv->total_chans; i++) |
| fsl_re_remove_chan(re_priv->re_jrs[i]); |
| |
| /* Unregister the driver */ |
| dma_async_device_unregister(&re_priv->dma_dev); |
| |
| return 0; |
| } |
| |
| static struct of_device_id fsl_re_ids[] = { |
| { .compatible = "fsl,raideng-v1.0", }, |
| {} |
| }; |
| |
| static struct platform_driver fsl_re_driver = { |
| .driver = { |
| .name = "fsl-raideng", |
| .of_match_table = fsl_re_ids, |
| }, |
| .probe = fsl_re_probe, |
| .remove = fsl_re_remove, |
| }; |
| |
| module_platform_driver(fsl_re_driver); |
| |
| MODULE_AUTHOR("Harninder Rai <harninder.rai@freescale.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("Freescale RAID Engine Device Driver"); |