qlcnic: Add support for configuring eswitch and npars
Following changes are made:
1.Obtain capabilities of Nic partition.
2.Configure tx bandwidth of particular Nic partition.
3.Configure the eswitch for setting port mirroring, enable mac
learning, promiscous mode.
Signed-off-by: Rajesh K Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index 3675678..60ea7cb 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -959,8 +959,6 @@
u16 switch_mode;
u16 max_tx_ques;
u16 max_rx_ques;
- u16 min_tx_bw;
- u16 max_tx_bw;
u16 max_mtu;
u32 fw_hal_version;
@@ -984,7 +982,7 @@
u64 dev_rst_time;
- struct qlcnic_pci_info *npars;
+ struct qlcnic_npar_info *npars;
struct qlcnic_eswitch *eswitch;
struct qlcnic_nic_template *nic_ops;
@@ -1042,6 +1040,18 @@
u8 reserved2[106];
};
+struct qlcnic_npar_info {
+ u16 vlan_id;
+ u8 phy_port;
+ u8 type;
+ u8 active;
+ u8 enable_pm;
+ u8 dest_npar;
+ u8 host_vlan_tag;
+ u8 promisc_mode;
+ u8 discard_tagged;
+ u8 mac_learning;
+};
struct qlcnic_eswitch {
u8 port;
u8 active_vports;
@@ -1057,6 +1067,63 @@
#define QLCNIC_SWITCH_PORT_MIRRORING BIT_4
};
+
+/* Return codes for Error handling */
+#define QL_STATUS_INVALID_PARAM -1
+
+#define MAX_BW 10000
+#define MIN_BW 100
+#define MAX_VLAN_ID 4095
+#define MIN_VLAN_ID 2
+#define MAX_TX_QUEUES 1
+#define MAX_RX_QUEUES 4
+#define DEFAULT_MAC_LEARN 1
+
+#define IS_VALID_VLAN(vlan) (vlan >= MIN_VLAN_ID && vlan <= MAX_VLAN_ID)
+#define IS_VALID_BW(bw) (bw >= MIN_BW && bw <= MAX_BW \
+ && (bw % 100) == 0)
+#define IS_VALID_TX_QUEUES(que) (que > 0 && que <= MAX_TX_QUEUES)
+#define IS_VALID_RX_QUEUES(que) (que > 0 && que <= MAX_RX_QUEUES)
+#define IS_VALID_MODE(mode) (mode == 0 || mode == 1)
+
+struct qlcnic_pci_func_cfg {
+ u16 func_type;
+ u16 min_bw;
+ u16 max_bw;
+ u16 port_num;
+ u8 pci_func;
+ u8 func_state;
+ u8 def_mac_addr[6];
+};
+
+struct qlcnic_npar_func_cfg {
+ u32 fw_capab;
+ u16 port_num;
+ u16 min_bw;
+ u16 max_bw;
+ u16 max_tx_queues;
+ u16 max_rx_queues;
+ u8 pci_func;
+ u8 op_mode;
+};
+
+struct qlcnic_pm_func_cfg {
+ u8 pci_func;
+ u8 action;
+ u8 dest_npar;
+ u8 reserved[5];
+};
+
+struct qlcnic_esw_func_cfg {
+ u16 vlan_id;
+ u8 pci_func;
+ u8 host_vlan_tag;
+ u8 promisc_mode;
+ u8 discard_tagged;
+ u8 mac_learning;
+ u8 reserved;
+};
+
int qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val);
int qlcnic_fw_cmd_set_phy(struct qlcnic_adapter *adapter, u32 reg, u32 val);
@@ -1169,9 +1236,9 @@
/* Management functions */
int qlcnic_set_mac_address(struct qlcnic_adapter *, u8*);
int qlcnic_get_mac_address(struct qlcnic_adapter *, u8*);
-int qlcnic_get_nic_info(struct qlcnic_adapter *, u8);
+int qlcnic_get_nic_info(struct qlcnic_adapter *, struct qlcnic_info *, u8);
int qlcnic_set_nic_info(struct qlcnic_adapter *, struct qlcnic_info *);
-int qlcnic_get_pci_info(struct qlcnic_adapter *);
+int qlcnic_get_pci_info(struct qlcnic_adapter *, struct qlcnic_pci_info*);
int qlcnic_reset_partition(struct qlcnic_adapter *, u8);
/* eSwitch management functions */