| /******************************************************************* |
| * This file is part of the Emulex Linux Device Driver for * |
| * Fibre Channel Host Bus Adapters. * |
| * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term * |
| * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * |
| * Copyright (C) 2004-2016 Emulex. All rights reserved. * |
| * EMULEX and SLI are trademarks of Emulex. * |
| * www.broadcom.com * |
| * Portions Copyright (C) 2004-2005 Christoph Hellwig * |
| * * |
| * This program is free software; you can redistribute it and/or * |
| * modify it under the terms of version 2 of the GNU General * |
| * Public License as published by the Free Software Foundation. * |
| * This program is distributed in the hope that it will be useful. * |
| * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * |
| * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * |
| * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * |
| * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * |
| * TO BE LEGALLY INVALID. See the GNU General Public License for * |
| * more details, a copy of which can be found in the file COPYING * |
| * included with this package. * |
| ********************************************************************/ |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <asm/unaligned.h> |
| #include <linux/crc-t10dif.h> |
| #include <net/checksum.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_eh.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_tcq.h> |
| #include <scsi/scsi_transport_fc.h> |
| #include <scsi/fc/fc_fs.h> |
| |
| #include <linux/nvme.h> |
| #include <linux/nvme-fc-driver.h> |
| #include <linux/nvme-fc.h> |
| #include "lpfc_version.h" |
| #include "lpfc_hw4.h" |
| #include "lpfc_hw.h" |
| #include "lpfc_sli.h" |
| #include "lpfc_sli4.h" |
| #include "lpfc_nl.h" |
| #include "lpfc_disc.h" |
| #include "lpfc.h" |
| #include "lpfc_nvme.h" |
| #include "lpfc_scsi.h" |
| #include "lpfc_logmsg.h" |
| #include "lpfc_crtn.h" |
| #include "lpfc_vport.h" |
| #include "lpfc_debugfs.h" |
| |
| /* NVME initiator-based functions */ |
| |
| static struct lpfc_nvme_buf * |
| lpfc_get_nvme_buf(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp, |
| int expedite); |
| |
| static void |
| lpfc_release_nvme_buf(struct lpfc_hba *, struct lpfc_nvme_buf *); |
| |
| static struct nvme_fc_port_template lpfc_nvme_template; |
| |
| static union lpfc_wqe128 lpfc_iread_cmd_template; |
| static union lpfc_wqe128 lpfc_iwrite_cmd_template; |
| static union lpfc_wqe128 lpfc_icmnd_cmd_template; |
| |
| /* Setup WQE templates for NVME IOs */ |
| void |
| lpfc_nvme_cmd_template(void) |
| { |
| union lpfc_wqe128 *wqe; |
| |
| /* IREAD template */ |
| wqe = &lpfc_iread_cmd_template; |
| memset(wqe, 0, sizeof(union lpfc_wqe128)); |
| |
| /* Word 0, 1, 2 - BDE is variable */ |
| |
| /* Word 3 - cmd_buff_len, payload_offset_len is zero */ |
| |
| /* Word 4 - total_xfer_len is variable */ |
| |
| /* Word 5 - is zero */ |
| |
| /* Word 6 - ctxt_tag, xri_tag is variable */ |
| |
| /* Word 7 */ |
| bf_set(wqe_cmnd, &wqe->fcp_iread.wqe_com, CMD_FCP_IREAD64_WQE); |
| bf_set(wqe_pu, &wqe->fcp_iread.wqe_com, PARM_READ_CHECK); |
| bf_set(wqe_class, &wqe->fcp_iread.wqe_com, CLASS3); |
| bf_set(wqe_ct, &wqe->fcp_iread.wqe_com, SLI4_CT_RPI); |
| |
| /* Word 8 - abort_tag is variable */ |
| |
| /* Word 9 - reqtag is variable */ |
| |
| /* Word 10 - dbde, wqes is variable */ |
| bf_set(wqe_qosd, &wqe->fcp_iread.wqe_com, 0); |
| bf_set(wqe_nvme, &wqe->fcp_iread.wqe_com, 1); |
| bf_set(wqe_iod, &wqe->fcp_iread.wqe_com, LPFC_WQE_IOD_READ); |
| bf_set(wqe_lenloc, &wqe->fcp_iread.wqe_com, LPFC_WQE_LENLOC_WORD4); |
| bf_set(wqe_dbde, &wqe->fcp_iread.wqe_com, 0); |
| bf_set(wqe_wqes, &wqe->fcp_iread.wqe_com, 1); |
| |
| /* Word 11 - pbde is variable */ |
| bf_set(wqe_cmd_type, &wqe->fcp_iread.wqe_com, NVME_READ_CMD); |
| bf_set(wqe_cqid, &wqe->fcp_iread.wqe_com, LPFC_WQE_CQ_ID_DEFAULT); |
| bf_set(wqe_pbde, &wqe->fcp_iread.wqe_com, 1); |
| |
| /* Word 12 - is zero */ |
| |
| /* Word 13, 14, 15 - PBDE is variable */ |
| |
| /* IWRITE template */ |
| wqe = &lpfc_iwrite_cmd_template; |
| memset(wqe, 0, sizeof(union lpfc_wqe128)); |
| |
| /* Word 0, 1, 2 - BDE is variable */ |
| |
| /* Word 3 - cmd_buff_len, payload_offset_len is zero */ |
| |
| /* Word 4 - total_xfer_len is variable */ |
| |
| /* Word 5 - initial_xfer_len is variable */ |
| |
| /* Word 6 - ctxt_tag, xri_tag is variable */ |
| |
| /* Word 7 */ |
| bf_set(wqe_cmnd, &wqe->fcp_iwrite.wqe_com, CMD_FCP_IWRITE64_WQE); |
| bf_set(wqe_pu, &wqe->fcp_iwrite.wqe_com, PARM_READ_CHECK); |
| bf_set(wqe_class, &wqe->fcp_iwrite.wqe_com, CLASS3); |
| bf_set(wqe_ct, &wqe->fcp_iwrite.wqe_com, SLI4_CT_RPI); |
| |
| /* Word 8 - abort_tag is variable */ |
| |
| /* Word 9 - reqtag is variable */ |
| |
| /* Word 10 - dbde, wqes is variable */ |
| bf_set(wqe_qosd, &wqe->fcp_iwrite.wqe_com, 0); |
| bf_set(wqe_nvme, &wqe->fcp_iwrite.wqe_com, 1); |
| bf_set(wqe_iod, &wqe->fcp_iwrite.wqe_com, LPFC_WQE_IOD_WRITE); |
| bf_set(wqe_lenloc, &wqe->fcp_iwrite.wqe_com, LPFC_WQE_LENLOC_WORD4); |
| bf_set(wqe_dbde, &wqe->fcp_iwrite.wqe_com, 0); |
| bf_set(wqe_wqes, &wqe->fcp_iwrite.wqe_com, 1); |
| |
| /* Word 11 - pbde is variable */ |
| bf_set(wqe_cmd_type, &wqe->fcp_iwrite.wqe_com, NVME_WRITE_CMD); |
| bf_set(wqe_cqid, &wqe->fcp_iwrite.wqe_com, LPFC_WQE_CQ_ID_DEFAULT); |
| bf_set(wqe_pbde, &wqe->fcp_iwrite.wqe_com, 1); |
| |
| /* Word 12 - is zero */ |
| |
| /* Word 13, 14, 15 - PBDE is variable */ |
| |
| /* ICMND template */ |
| wqe = &lpfc_icmnd_cmd_template; |
| memset(wqe, 0, sizeof(union lpfc_wqe128)); |
| |
| /* Word 0, 1, 2 - BDE is variable */ |
| |
| /* Word 3 - payload_offset_len is variable */ |
| |
| /* Word 4, 5 - is zero */ |
| |
| /* Word 6 - ctxt_tag, xri_tag is variable */ |
| |
| /* Word 7 */ |
| bf_set(wqe_cmnd, &wqe->fcp_icmd.wqe_com, CMD_FCP_ICMND64_WQE); |
| bf_set(wqe_pu, &wqe->fcp_icmd.wqe_com, 0); |
| bf_set(wqe_class, &wqe->fcp_icmd.wqe_com, CLASS3); |
| bf_set(wqe_ct, &wqe->fcp_icmd.wqe_com, SLI4_CT_RPI); |
| |
| /* Word 8 - abort_tag is variable */ |
| |
| /* Word 9 - reqtag is variable */ |
| |
| /* Word 10 - dbde, wqes is variable */ |
| bf_set(wqe_qosd, &wqe->fcp_icmd.wqe_com, 1); |
| bf_set(wqe_nvme, &wqe->fcp_icmd.wqe_com, 1); |
| bf_set(wqe_iod, &wqe->fcp_icmd.wqe_com, LPFC_WQE_IOD_NONE); |
| bf_set(wqe_lenloc, &wqe->fcp_icmd.wqe_com, LPFC_WQE_LENLOC_NONE); |
| bf_set(wqe_dbde, &wqe->fcp_icmd.wqe_com, 0); |
| bf_set(wqe_wqes, &wqe->fcp_icmd.wqe_com, 1); |
| |
| /* Word 11 */ |
| bf_set(wqe_cmd_type, &wqe->fcp_icmd.wqe_com, FCP_COMMAND); |
| bf_set(wqe_cqid, &wqe->fcp_icmd.wqe_com, LPFC_WQE_CQ_ID_DEFAULT); |
| bf_set(wqe_pbde, &wqe->fcp_icmd.wqe_com, 0); |
| |
| /* Word 12, 13, 14, 15 - is zero */ |
| } |
| |
| /** |
| * lpfc_nvme_create_queue - |
| * @lpfc_pnvme: Pointer to the driver's nvme instance data |
| * @qidx: An cpu index used to affinitize IO queues and MSIX vectors. |
| * @handle: An opaque driver handle used in follow-up calls. |
| * |
| * Driver registers this routine to preallocate and initialize any |
| * internal data structures to bind the @qidx to its internal IO queues. |
| * A hardware queue maps (qidx) to a specific driver MSI-X vector/EQ/CQ/WQ. |
| * |
| * Return value : |
| * 0 - Success |
| * -EINVAL - Unsupported input value. |
| * -ENOMEM - Could not alloc necessary memory |
| **/ |
| static int |
| lpfc_nvme_create_queue(struct nvme_fc_local_port *pnvme_lport, |
| unsigned int qidx, u16 qsize, |
| void **handle) |
| { |
| struct lpfc_nvme_lport *lport; |
| struct lpfc_vport *vport; |
| struct lpfc_nvme_qhandle *qhandle; |
| char *str; |
| |
| if (!pnvme_lport->private) |
| return -ENOMEM; |
| |
| lport = (struct lpfc_nvme_lport *)pnvme_lport->private; |
| vport = lport->vport; |
| qhandle = kzalloc(sizeof(struct lpfc_nvme_qhandle), GFP_KERNEL); |
| if (qhandle == NULL) |
| return -ENOMEM; |
| |
| qhandle->cpu_id = smp_processor_id(); |
| qhandle->qidx = qidx; |
| /* |
| * NVME qidx == 0 is the admin queue, so both admin queue |
| * and first IO queue will use MSI-X vector and associated |
| * EQ/CQ/WQ at index 0. After that they are sequentially assigned. |
| */ |
| if (qidx) { |
| str = "IO "; /* IO queue */ |
| qhandle->index = ((qidx - 1) % |
| vport->phba->cfg_nvme_io_channel); |
| } else { |
| str = "ADM"; /* Admin queue */ |
| qhandle->index = qidx; |
| } |
| |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME, |
| "6073 Binding %s HdwQueue %d (cpu %d) to " |
| "io_channel %d qhandle %p\n", str, |
| qidx, qhandle->cpu_id, qhandle->index, qhandle); |
| *handle = (void *)qhandle; |
| return 0; |
| } |
| |
| /** |
| * lpfc_nvme_delete_queue - |
| * @lpfc_pnvme: Pointer to the driver's nvme instance data |
| * @qidx: An cpu index used to affinitize IO queues and MSIX vectors. |
| * @handle: An opaque driver handle from lpfc_nvme_create_queue |
| * |
| * Driver registers this routine to free |
| * any internal data structures to bind the @qidx to its internal |
| * IO queues. |
| * |
| * Return value : |
| * 0 - Success |
| * TODO: What are the failure codes. |
| **/ |
| static void |
| lpfc_nvme_delete_queue(struct nvme_fc_local_port *pnvme_lport, |
| unsigned int qidx, |
| void *handle) |
| { |
| struct lpfc_nvme_lport *lport; |
| struct lpfc_vport *vport; |
| |
| if (!pnvme_lport->private) |
| return; |
| |
| lport = (struct lpfc_nvme_lport *)pnvme_lport->private; |
| vport = lport->vport; |
| |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME, |
| "6001 ENTER. lpfc_pnvme %p, qidx x%xi qhandle %p\n", |
| lport, qidx, handle); |
| kfree(handle); |
| } |
| |
| static void |
| lpfc_nvme_localport_delete(struct nvme_fc_local_port *localport) |
| { |
| struct lpfc_nvme_lport *lport = localport->private; |
| |
| lpfc_printf_vlog(lport->vport, KERN_INFO, LOG_NVME, |
| "6173 localport %p delete complete\n", |
| lport); |
| |
| /* release any threads waiting for the unreg to complete */ |
| if (lport->vport->localport) |
| complete(lport->lport_unreg_cmp); |
| } |
| |
| /* lpfc_nvme_remoteport_delete |
| * |
| * @remoteport: Pointer to an nvme transport remoteport instance. |
| * |
| * This is a template downcall. NVME transport calls this function |
| * when it has completed the unregistration of a previously |
| * registered remoteport. |
| * |
| * Return value : |
| * None |
| */ |
| void |
| lpfc_nvme_remoteport_delete(struct nvme_fc_remote_port *remoteport) |
| { |
| struct lpfc_nvme_rport *rport = remoteport->private; |
| struct lpfc_vport *vport; |
| struct lpfc_nodelist *ndlp; |
| |
| ndlp = rport->ndlp; |
| if (!ndlp) |
| goto rport_err; |
| |
| vport = ndlp->vport; |
| if (!vport) |
| goto rport_err; |
| |
| /* Remove this rport from the lport's list - memory is owned by the |
| * transport. Remove the ndlp reference for the NVME transport before |
| * calling state machine to remove the node. |
| */ |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC, |
| "6146 remoteport delete of remoteport %p\n", |
| remoteport); |
| spin_lock_irq(&vport->phba->hbalock); |
| |
| /* The register rebind might have occurred before the delete |
| * downcall. Guard against this race. |
| */ |
| if (ndlp->upcall_flags & NLP_WAIT_FOR_UNREG) { |
| ndlp->nrport = NULL; |
| ndlp->upcall_flags &= ~NLP_WAIT_FOR_UNREG; |
| } |
| spin_unlock_irq(&vport->phba->hbalock); |
| |
| /* Remove original register reference. The host transport |
| * won't reference this rport/remoteport any further. |
| */ |
| lpfc_nlp_put(ndlp); |
| |
| rport_err: |
| return; |
| } |
| |
| static void |
| lpfc_nvme_cmpl_gen_req(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe, |
| struct lpfc_wcqe_complete *wcqe) |
| { |
| struct lpfc_vport *vport = cmdwqe->vport; |
| struct lpfc_nvme_lport *lport; |
| uint32_t status; |
| struct nvmefc_ls_req *pnvme_lsreq; |
| struct lpfc_dmabuf *buf_ptr; |
| struct lpfc_nodelist *ndlp; |
| |
| pnvme_lsreq = (struct nvmefc_ls_req *)cmdwqe->context2; |
| status = bf_get(lpfc_wcqe_c_status, wcqe) & LPFC_IOCB_STATUS_MASK; |
| |
| if (vport->localport) { |
| lport = (struct lpfc_nvme_lport *)vport->localport->private; |
| if (lport) { |
| atomic_inc(&lport->fc4NvmeLsCmpls); |
| if (status) { |
| if (bf_get(lpfc_wcqe_c_xb, wcqe)) |
| atomic_inc(&lport->cmpl_ls_xb); |
| atomic_inc(&lport->cmpl_ls_err); |
| } |
| } |
| } |
| |
| ndlp = (struct lpfc_nodelist *)cmdwqe->context1; |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC, |
| "6047 nvme cmpl Enter " |
| "Data %p DID %x Xri: %x status %x reason x%x cmd:%p " |
| "lsreg:%p bmp:%p ndlp:%p\n", |
| pnvme_lsreq, ndlp ? ndlp->nlp_DID : 0, |
| cmdwqe->sli4_xritag, status, |
| (wcqe->parameter & 0xffff), |
| cmdwqe, pnvme_lsreq, cmdwqe->context3, ndlp); |
| |
| lpfc_nvmeio_data(phba, "NVME LS CMPL: xri x%x stat x%x parm x%x\n", |
| cmdwqe->sli4_xritag, status, wcqe->parameter); |
| |
| if (cmdwqe->context3) { |
| buf_ptr = (struct lpfc_dmabuf *)cmdwqe->context3; |
| lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys); |
| kfree(buf_ptr); |
| cmdwqe->context3 = NULL; |
| } |
| if (pnvme_lsreq->done) |
| pnvme_lsreq->done(pnvme_lsreq, status); |
| else |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC, |
| "6046 nvme cmpl without done call back? " |
| "Data %p DID %x Xri: %x status %x\n", |
| pnvme_lsreq, ndlp ? ndlp->nlp_DID : 0, |
| cmdwqe->sli4_xritag, status); |
| if (ndlp) { |
| lpfc_nlp_put(ndlp); |
| cmdwqe->context1 = NULL; |
| } |
| lpfc_sli_release_iocbq(phba, cmdwqe); |
| } |
| |
| static int |
| lpfc_nvme_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp, |
| struct lpfc_dmabuf *inp, |
| struct nvmefc_ls_req *pnvme_lsreq, |
| void (*cmpl)(struct lpfc_hba *, struct lpfc_iocbq *, |
| struct lpfc_wcqe_complete *), |
| struct lpfc_nodelist *ndlp, uint32_t num_entry, |
| uint32_t tmo, uint8_t retry) |
| { |
| struct lpfc_hba *phba = vport->phba; |
| union lpfc_wqe128 *wqe; |
| struct lpfc_iocbq *genwqe; |
| struct ulp_bde64 *bpl; |
| struct ulp_bde64 bde; |
| int i, rc, xmit_len, first_len; |
| |
| /* Allocate buffer for command WQE */ |
| genwqe = lpfc_sli_get_iocbq(phba); |
| if (genwqe == NULL) |
| return 1; |
| |
| wqe = &genwqe->wqe; |
| memset(wqe, 0, sizeof(union lpfc_wqe)); |
| |
| genwqe->context3 = (uint8_t *)bmp; |
| genwqe->iocb_flag |= LPFC_IO_NVME_LS; |
| |
| /* Save for completion so we can release these resources */ |
| genwqe->context1 = lpfc_nlp_get(ndlp); |
| genwqe->context2 = (uint8_t *)pnvme_lsreq; |
| /* Fill in payload, bp points to frame payload */ |
| |
| if (!tmo) |
| /* FC spec states we need 3 * ratov for CT requests */ |
| tmo = (3 * phba->fc_ratov); |
| |
| /* For this command calculate the xmit length of the request bde. */ |
| xmit_len = 0; |
| first_len = 0; |
| bpl = (struct ulp_bde64 *)bmp->virt; |
| for (i = 0; i < num_entry; i++) { |
| bde.tus.w = bpl[i].tus.w; |
| if (bde.tus.f.bdeFlags != BUFF_TYPE_BDE_64) |
| break; |
| xmit_len += bde.tus.f.bdeSize; |
| if (i == 0) |
| first_len = xmit_len; |
| } |
| |
| genwqe->rsvd2 = num_entry; |
| genwqe->hba_wqidx = 0; |
| |
| /* Words 0 - 2 */ |
| wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64; |
| wqe->generic.bde.tus.f.bdeSize = first_len; |
| wqe->generic.bde.addrLow = bpl[0].addrLow; |
| wqe->generic.bde.addrHigh = bpl[0].addrHigh; |
| |
| /* Word 3 */ |
| wqe->gen_req.request_payload_len = first_len; |
| |
| /* Word 4 */ |
| |
| /* Word 5 */ |
| bf_set(wqe_dfctl, &wqe->gen_req.wge_ctl, 0); |
| bf_set(wqe_si, &wqe->gen_req.wge_ctl, 1); |
| bf_set(wqe_la, &wqe->gen_req.wge_ctl, 1); |
| bf_set(wqe_rctl, &wqe->gen_req.wge_ctl, FC_RCTL_ELS4_REQ); |
| bf_set(wqe_type, &wqe->gen_req.wge_ctl, FC_TYPE_NVME); |
| |
| /* Word 6 */ |
| bf_set(wqe_ctxt_tag, &wqe->gen_req.wqe_com, |
| phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]); |
| bf_set(wqe_xri_tag, &wqe->gen_req.wqe_com, genwqe->sli4_xritag); |
| |
| /* Word 7 */ |
| bf_set(wqe_tmo, &wqe->gen_req.wqe_com, (vport->phba->fc_ratov-1)); |
| bf_set(wqe_class, &wqe->gen_req.wqe_com, CLASS3); |
| bf_set(wqe_cmnd, &wqe->gen_req.wqe_com, CMD_GEN_REQUEST64_WQE); |
| bf_set(wqe_ct, &wqe->gen_req.wqe_com, SLI4_CT_RPI); |
| |
| /* Word 8 */ |
| wqe->gen_req.wqe_com.abort_tag = genwqe->iotag; |
| |
| /* Word 9 */ |
| bf_set(wqe_reqtag, &wqe->gen_req.wqe_com, genwqe->iotag); |
| |
| /* Word 10 */ |
| bf_set(wqe_dbde, &wqe->gen_req.wqe_com, 1); |
| bf_set(wqe_iod, &wqe->gen_req.wqe_com, LPFC_WQE_IOD_READ); |
| bf_set(wqe_qosd, &wqe->gen_req.wqe_com, 1); |
| bf_set(wqe_lenloc, &wqe->gen_req.wqe_com, LPFC_WQE_LENLOC_NONE); |
| bf_set(wqe_ebde_cnt, &wqe->gen_req.wqe_com, 0); |
| |
| /* Word 11 */ |
| bf_set(wqe_cqid, &wqe->gen_req.wqe_com, LPFC_WQE_CQ_ID_DEFAULT); |
| bf_set(wqe_cmd_type, &wqe->gen_req.wqe_com, OTHER_COMMAND); |
| |
| |
| /* Issue GEN REQ WQE for NPORT <did> */ |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS, |
| "6050 Issue GEN REQ WQE to NPORT x%x " |
| "Data: x%x x%x wq:%p lsreq:%p bmp:%p xmit:%d 1st:%d\n", |
| ndlp->nlp_DID, genwqe->iotag, |
| vport->port_state, |
| genwqe, pnvme_lsreq, bmp, xmit_len, first_len); |
| genwqe->wqe_cmpl = cmpl; |
| genwqe->iocb_cmpl = NULL; |
| genwqe->drvrTimeout = tmo + LPFC_DRVR_TIMEOUT; |
| genwqe->vport = vport; |
| genwqe->retry = retry; |
| |
| lpfc_nvmeio_data(phba, "NVME LS XMIT: xri x%x iotag x%x to x%06x\n", |
| genwqe->sli4_xritag, genwqe->iotag, ndlp->nlp_DID); |
| |
| rc = lpfc_sli4_issue_wqe(phba, LPFC_ELS_RING, genwqe); |
| if (rc) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, |
| "6045 Issue GEN REQ WQE to NPORT x%x " |
| "Data: x%x x%x\n", |
| ndlp->nlp_DID, genwqe->iotag, |
| vport->port_state); |
| lpfc_sli_release_iocbq(phba, genwqe); |
| return 1; |
| } |
| return 0; |
| } |
| |
| /** |
| * lpfc_nvme_ls_req - Issue an Link Service request |
| * @lpfc_pnvme: Pointer to the driver's nvme instance data |
| * @lpfc_nvme_lport: Pointer to the driver's local port data |
| * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq |
| * |
| * Driver registers this routine to handle any link service request |
| * from the nvme_fc transport to a remote nvme-aware port. |
| * |
| * Return value : |
| * 0 - Success |
| * TODO: What are the failure codes. |
| **/ |
| static int |
| lpfc_nvme_ls_req(struct nvme_fc_local_port *pnvme_lport, |
| struct nvme_fc_remote_port *pnvme_rport, |
| struct nvmefc_ls_req *pnvme_lsreq) |
| { |
| int ret = 0; |
| struct lpfc_nvme_lport *lport; |
| struct lpfc_nvme_rport *rport; |
| struct lpfc_vport *vport; |
| struct lpfc_nodelist *ndlp; |
| struct ulp_bde64 *bpl; |
| struct lpfc_dmabuf *bmp; |
| uint16_t ntype, nstate; |
| |
| /* there are two dma buf in the request, actually there is one and |
| * the second one is just the start address + cmd size. |
| * Before calling lpfc_nvme_gen_req these buffers need to be wrapped |
| * in a lpfc_dmabuf struct. When freeing we just free the wrapper |
| * because the nvem layer owns the data bufs. |
| * We do not have to break these packets open, we don't care what is in |
| * them. And we do not have to look at the resonse data, we only care |
| * that we got a response. All of the caring is going to happen in the |
| * nvme-fc layer. |
| */ |
| |
| lport = (struct lpfc_nvme_lport *)pnvme_lport->private; |
| rport = (struct lpfc_nvme_rport *)pnvme_rport->private; |
| if (unlikely(!lport) || unlikely(!rport)) |
| return -EINVAL; |
| |
| vport = lport->vport; |
| |
| if (vport->load_flag & FC_UNLOADING) |
| return -ENODEV; |
| |
| /* Need the ndlp. It is stored in the driver's rport. */ |
| ndlp = rport->ndlp; |
| if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR, |
| "6051 Remoteport %p, rport has invalid ndlp. " |
| "Failing LS Req\n", pnvme_rport); |
| return -ENODEV; |
| } |
| |
| /* The remote node has to be a mapped nvme target or an |
| * unmapped nvme initiator or it's an error. |
| */ |
| ntype = ndlp->nlp_type; |
| nstate = ndlp->nlp_state; |
| if ((ntype & NLP_NVME_TARGET && nstate != NLP_STE_MAPPED_NODE) || |
| (ntype & NLP_NVME_INITIATOR && nstate != NLP_STE_UNMAPPED_NODE)) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR, |
| "6088 DID x%06x not ready for " |
| "IO. State x%x, Type x%x\n", |
| pnvme_rport->port_id, |
| ndlp->nlp_state, ndlp->nlp_type); |
| return -ENODEV; |
| } |
| bmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); |
| if (!bmp) { |
| |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC, |
| "6044 Could not find node for DID %x\n", |
| pnvme_rport->port_id); |
| return 2; |
| } |
| INIT_LIST_HEAD(&bmp->list); |
| bmp->virt = lpfc_mbuf_alloc(vport->phba, MEM_PRI, &(bmp->phys)); |
| if (!bmp->virt) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC, |
| "6042 Could not find node for DID %x\n", |
| pnvme_rport->port_id); |
| kfree(bmp); |
| return 3; |
| } |
| bpl = (struct ulp_bde64 *)bmp->virt; |
| bpl->addrHigh = le32_to_cpu(putPaddrHigh(pnvme_lsreq->rqstdma)); |
| bpl->addrLow = le32_to_cpu(putPaddrLow(pnvme_lsreq->rqstdma)); |
| bpl->tus.f.bdeFlags = 0; |
| bpl->tus.f.bdeSize = pnvme_lsreq->rqstlen; |
| bpl->tus.w = le32_to_cpu(bpl->tus.w); |
| bpl++; |
| |
| bpl->addrHigh = le32_to_cpu(putPaddrHigh(pnvme_lsreq->rspdma)); |
| bpl->addrLow = le32_to_cpu(putPaddrLow(pnvme_lsreq->rspdma)); |
| bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I; |
| bpl->tus.f.bdeSize = pnvme_lsreq->rsplen; |
| bpl->tus.w = le32_to_cpu(bpl->tus.w); |
| |
| /* Expand print to include key fields. */ |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC, |
| "6149 Issue LS Req to DID 0x%06x lport %p, rport %p " |
| "lsreq%p rqstlen:%d rsplen:%d %pad %pad\n", |
| ndlp->nlp_DID, |
| pnvme_lport, pnvme_rport, |
| pnvme_lsreq, pnvme_lsreq->rqstlen, |
| pnvme_lsreq->rsplen, &pnvme_lsreq->rqstdma, |
| &pnvme_lsreq->rspdma); |
| |
| atomic_inc(&lport->fc4NvmeLsRequests); |
| |
| /* Hardcode the wait to 30 seconds. Connections are failing otherwise. |
| * This code allows it all to work. |
| */ |
| ret = lpfc_nvme_gen_req(vport, bmp, pnvme_lsreq->rqstaddr, |
| pnvme_lsreq, lpfc_nvme_cmpl_gen_req, |
| ndlp, 2, 30, 0); |
| if (ret != WQE_SUCCESS) { |
| atomic_inc(&lport->xmt_ls_err); |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC, |
| "6052 EXIT. issue ls wqe failed lport %p, " |
| "rport %p lsreq%p Status %x DID %x\n", |
| pnvme_lport, pnvme_rport, pnvme_lsreq, |
| ret, ndlp->nlp_DID); |
| lpfc_mbuf_free(vport->phba, bmp->virt, bmp->phys); |
| kfree(bmp); |
| return ret; |
| } |
| |
| /* Stub in routine and return 0 for now. */ |
| return ret; |
| } |
| |
| /** |
| * lpfc_nvme_ls_abort - Issue an Link Service request |
| * @lpfc_pnvme: Pointer to the driver's nvme instance data |
| * @lpfc_nvme_lport: Pointer to the driver's local port data |
| * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq |
| * |
| * Driver registers this routine to handle any link service request |
| * from the nvme_fc transport to a remote nvme-aware port. |
| * |
| * Return value : |
| * 0 - Success |
| * TODO: What are the failure codes. |
| **/ |
| static void |
| lpfc_nvme_ls_abort(struct nvme_fc_local_port *pnvme_lport, |
| struct nvme_fc_remote_port *pnvme_rport, |
| struct nvmefc_ls_req *pnvme_lsreq) |
| { |
| struct lpfc_nvme_lport *lport; |
| struct lpfc_vport *vport; |
| struct lpfc_hba *phba; |
| struct lpfc_nodelist *ndlp; |
| LIST_HEAD(abort_list); |
| struct lpfc_sli_ring *pring; |
| struct lpfc_iocbq *wqe, *next_wqe; |
| |
| lport = (struct lpfc_nvme_lport *)pnvme_lport->private; |
| if (unlikely(!lport)) |
| return; |
| vport = lport->vport; |
| phba = vport->phba; |
| |
| if (vport->load_flag & FC_UNLOADING) |
| return; |
| |
| ndlp = lpfc_findnode_did(vport, pnvme_rport->port_id); |
| if (!ndlp) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS, |
| "6049 Could not find node for DID %x\n", |
| pnvme_rport->port_id); |
| return; |
| } |
| |
| /* Expand print to include key fields. */ |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_ABTS, |
| "6040 ENTER. lport %p, rport %p lsreq %p rqstlen:%d " |
| "rsplen:%d %pad %pad\n", |
| pnvme_lport, pnvme_rport, |
| pnvme_lsreq, pnvme_lsreq->rqstlen, |
| pnvme_lsreq->rsplen, &pnvme_lsreq->rqstdma, |
| &pnvme_lsreq->rspdma); |
| |
| /* |
| * Lock the ELS ring txcmplq and build a local list of all ELS IOs |
| * that need an ABTS. The IOs need to stay on the txcmplq so that |
| * the abort operation completes them successfully. |
| */ |
| pring = phba->sli4_hba.nvmels_wq->pring; |
| spin_lock_irq(&phba->hbalock); |
| spin_lock(&pring->ring_lock); |
| list_for_each_entry_safe(wqe, next_wqe, &pring->txcmplq, list) { |
| /* Add to abort_list on on NDLP match. */ |
| if (lpfc_check_sli_ndlp(phba, pring, wqe, ndlp)) { |
| wqe->iocb_flag |= LPFC_DRIVER_ABORTED; |
| list_add_tail(&wqe->dlist, &abort_list); |
| } |
| } |
| spin_unlock(&pring->ring_lock); |
| spin_unlock_irq(&phba->hbalock); |
| |
| /* Abort the targeted IOs and remove them from the abort list. */ |
| list_for_each_entry_safe(wqe, next_wqe, &abort_list, dlist) { |
| atomic_inc(&lport->xmt_ls_abort); |
| spin_lock_irq(&phba->hbalock); |
| list_del_init(&wqe->dlist); |
| lpfc_sli_issue_abort_iotag(phba, pring, wqe); |
| spin_unlock_irq(&phba->hbalock); |
| } |
| } |
| |
| /* Fix up the existing sgls for NVME IO. */ |
| static inline void |
| lpfc_nvme_adj_fcp_sgls(struct lpfc_vport *vport, |
| struct lpfc_nvme_buf *lpfc_ncmd, |
| struct nvmefc_fcp_req *nCmd) |
| { |
| struct lpfc_hba *phba = vport->phba; |
| struct sli4_sge *sgl; |
| union lpfc_wqe128 *wqe; |
| uint32_t *wptr, *dptr; |
| |
| /* |
| * Get a local pointer to the built-in wqe and correct |
| * the cmd size to match NVME's 96 bytes and fix |
| * the dma address. |
| */ |
| |
| wqe = &lpfc_ncmd->cur_iocbq.wqe; |
| |
| /* |
| * Adjust the FCP_CMD and FCP_RSP DMA data and sge_len to |
| * match NVME. NVME sends 96 bytes. Also, use the |
| * nvme commands command and response dma addresses |
| * rather than the virtual memory to ease the restore |
| * operation. |
| */ |
| sgl = lpfc_ncmd->nvme_sgl; |
| sgl->sge_len = cpu_to_le32(nCmd->cmdlen); |
| if (phba->cfg_nvme_embed_cmd) { |
| sgl->addr_hi = 0; |
| sgl->addr_lo = 0; |
| |
| /* Word 0-2 - NVME CMND IU (embedded payload) */ |
| wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_IMMED; |
| wqe->generic.bde.tus.f.bdeSize = 56; |
| wqe->generic.bde.addrHigh = 0; |
| wqe->generic.bde.addrLow = 64; /* Word 16 */ |
| |
| /* Word 10 - dbde is 0, wqes is 1 in template */ |
| |
| /* |
| * Embed the payload in the last half of the WQE |
| * WQE words 16-30 get the NVME CMD IU payload |
| * |
| * WQE words 16-19 get payload Words 1-4 |
| * WQE words 20-21 get payload Words 6-7 |
| * WQE words 22-29 get payload Words 16-23 |
| */ |
| wptr = &wqe->words[16]; /* WQE ptr */ |
| dptr = (uint32_t *)nCmd->cmdaddr; /* payload ptr */ |
| dptr++; /* Skip Word 0 in payload */ |
| |
| *wptr++ = *dptr++; /* Word 1 */ |
| *wptr++ = *dptr++; /* Word 2 */ |
| *wptr++ = *dptr++; /* Word 3 */ |
| *wptr++ = *dptr++; /* Word 4 */ |
| dptr++; /* Skip Word 5 in payload */ |
| *wptr++ = *dptr++; /* Word 6 */ |
| *wptr++ = *dptr++; /* Word 7 */ |
| dptr += 8; /* Skip Words 8-15 in payload */ |
| *wptr++ = *dptr++; /* Word 16 */ |
| *wptr++ = *dptr++; /* Word 17 */ |
| *wptr++ = *dptr++; /* Word 18 */ |
| *wptr++ = *dptr++; /* Word 19 */ |
| *wptr++ = *dptr++; /* Word 20 */ |
| *wptr++ = *dptr++; /* Word 21 */ |
| *wptr++ = *dptr++; /* Word 22 */ |
| *wptr = *dptr; /* Word 23 */ |
| } else { |
| sgl->addr_hi = cpu_to_le32(putPaddrHigh(nCmd->cmddma)); |
| sgl->addr_lo = cpu_to_le32(putPaddrLow(nCmd->cmddma)); |
| |
| /* Word 0-2 - NVME CMND IU Inline BDE */ |
| wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64; |
| wqe->generic.bde.tus.f.bdeSize = nCmd->cmdlen; |
| wqe->generic.bde.addrHigh = sgl->addr_hi; |
| wqe->generic.bde.addrLow = sgl->addr_lo; |
| |
| /* Word 10 */ |
| bf_set(wqe_dbde, &wqe->generic.wqe_com, 1); |
| bf_set(wqe_wqes, &wqe->generic.wqe_com, 0); |
| } |
| |
| sgl++; |
| |
| /* Setup the physical region for the FCP RSP */ |
| sgl->addr_hi = cpu_to_le32(putPaddrHigh(nCmd->rspdma)); |
| sgl->addr_lo = cpu_to_le32(putPaddrLow(nCmd->rspdma)); |
| sgl->word2 = le32_to_cpu(sgl->word2); |
| if (nCmd->sg_cnt) |
| bf_set(lpfc_sli4_sge_last, sgl, 0); |
| else |
| bf_set(lpfc_sli4_sge_last, sgl, 1); |
| sgl->word2 = cpu_to_le32(sgl->word2); |
| sgl->sge_len = cpu_to_le32(nCmd->rsplen); |
| } |
| |
| #ifdef CONFIG_SCSI_LPFC_DEBUG_FS |
| static void |
| lpfc_nvme_ktime(struct lpfc_hba *phba, |
| struct lpfc_nvme_buf *lpfc_ncmd) |
| { |
| uint64_t seg1, seg2, seg3, seg4; |
| uint64_t segsum; |
| |
| if (!lpfc_ncmd->ts_last_cmd || |
| !lpfc_ncmd->ts_cmd_start || |
| !lpfc_ncmd->ts_cmd_wqput || |
| !lpfc_ncmd->ts_isr_cmpl || |
| !lpfc_ncmd->ts_data_nvme) |
| return; |
| |
| if (lpfc_ncmd->ts_data_nvme < lpfc_ncmd->ts_cmd_start) |
| return; |
| if (lpfc_ncmd->ts_cmd_start < lpfc_ncmd->ts_last_cmd) |
| return; |
| if (lpfc_ncmd->ts_cmd_wqput < lpfc_ncmd->ts_cmd_start) |
| return; |
| if (lpfc_ncmd->ts_isr_cmpl < lpfc_ncmd->ts_cmd_wqput) |
| return; |
| if (lpfc_ncmd->ts_data_nvme < lpfc_ncmd->ts_isr_cmpl) |
| return; |
| /* |
| * Segment 1 - Time from Last FCP command cmpl is handed |
| * off to NVME Layer to start of next command. |
| * Segment 2 - Time from Driver receives a IO cmd start |
| * from NVME Layer to WQ put is done on IO cmd. |
| * Segment 3 - Time from Driver WQ put is done on IO cmd |
| * to MSI-X ISR for IO cmpl. |
| * Segment 4 - Time from MSI-X ISR for IO cmpl to when |
| * cmpl is handled off to the NVME Layer. |
| */ |
| seg1 = lpfc_ncmd->ts_cmd_start - lpfc_ncmd->ts_last_cmd; |
| if (seg1 > 5000000) /* 5 ms - for sequential IOs only */ |
| seg1 = 0; |
| |
| /* Calculate times relative to start of IO */ |
| seg2 = (lpfc_ncmd->ts_cmd_wqput - lpfc_ncmd->ts_cmd_start); |
| segsum = seg2; |
| seg3 = lpfc_ncmd->ts_isr_cmpl - lpfc_ncmd->ts_cmd_start; |
| if (segsum > seg3) |
| return; |
| seg3 -= segsum; |
| segsum += seg3; |
| |
| seg4 = lpfc_ncmd->ts_data_nvme - lpfc_ncmd->ts_cmd_start; |
| if (segsum > seg4) |
| return; |
| seg4 -= segsum; |
| |
| phba->ktime_data_samples++; |
| phba->ktime_seg1_total += seg1; |
| if (seg1 < phba->ktime_seg1_min) |
| phba->ktime_seg1_min = seg1; |
| else if (seg1 > phba->ktime_seg1_max) |
| phba->ktime_seg1_max = seg1; |
| phba->ktime_seg2_total += seg2; |
| if (seg2 < phba->ktime_seg2_min) |
| phba->ktime_seg2_min = seg2; |
| else if (seg2 > phba->ktime_seg2_max) |
| phba->ktime_seg2_max = seg2; |
| phba->ktime_seg3_total += seg3; |
| if (seg3 < phba->ktime_seg3_min) |
| phba->ktime_seg3_min = seg3; |
| else if (seg3 > phba->ktime_seg3_max) |
| phba->ktime_seg3_max = seg3; |
| phba->ktime_seg4_total += seg4; |
| if (seg4 < phba->ktime_seg4_min) |
| phba->ktime_seg4_min = seg4; |
| else if (seg4 > phba->ktime_seg4_max) |
| phba->ktime_seg4_max = seg4; |
| |
| lpfc_ncmd->ts_last_cmd = 0; |
| lpfc_ncmd->ts_cmd_start = 0; |
| lpfc_ncmd->ts_cmd_wqput = 0; |
| lpfc_ncmd->ts_isr_cmpl = 0; |
| lpfc_ncmd->ts_data_nvme = 0; |
| } |
| #endif |
| |
| /** |
| * lpfc_nvme_io_cmd_wqe_cmpl - Complete an NVME-over-FCP IO |
| * @lpfc_pnvme: Pointer to the driver's nvme instance data |
| * @lpfc_nvme_lport: Pointer to the driver's local port data |
| * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq |
| * |
| * Driver registers this routine as it io request handler. This |
| * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq |
| * data structure to the rport indicated in @lpfc_nvme_rport. |
| * |
| * Return value : |
| * 0 - Success |
| * TODO: What are the failure codes. |
| **/ |
| static void |
| lpfc_nvme_io_cmd_wqe_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeIn, |
| struct lpfc_wcqe_complete *wcqe) |
| { |
| struct lpfc_nvme_buf *lpfc_ncmd = |
| (struct lpfc_nvme_buf *)pwqeIn->context1; |
| struct lpfc_vport *vport = pwqeIn->vport; |
| struct nvmefc_fcp_req *nCmd; |
| struct nvme_fc_ersp_iu *ep; |
| struct nvme_fc_cmd_iu *cp; |
| struct lpfc_nvme_rport *rport; |
| struct lpfc_nodelist *ndlp; |
| struct lpfc_nvme_fcpreq_priv *freqpriv; |
| struct lpfc_nvme_lport *lport; |
| struct lpfc_nvme_ctrl_stat *cstat; |
| unsigned long flags; |
| uint32_t code, status, idx; |
| uint16_t cid, sqhd, data; |
| uint32_t *ptr; |
| |
| /* Sanity check on return of outstanding command */ |
| if (!lpfc_ncmd || !lpfc_ncmd->nvmeCmd || !lpfc_ncmd->nrport) { |
| if (!lpfc_ncmd) { |
| lpfc_printf_vlog(vport, KERN_ERR, |
| LOG_NODE | LOG_NVME_IOERR, |
| "6071 Null lpfc_ncmd pointer. No " |
| "release, skip completion\n"); |
| return; |
| } |
| |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR, |
| "6066 Missing cmpl ptrs: lpfc_ncmd %p, " |
| "nvmeCmd %p nrport %p\n", |
| lpfc_ncmd, lpfc_ncmd->nvmeCmd, |
| lpfc_ncmd->nrport); |
| |
| /* Release the lpfc_ncmd regardless of the missing elements. */ |
| lpfc_release_nvme_buf(phba, lpfc_ncmd); |
| return; |
| } |
| nCmd = lpfc_ncmd->nvmeCmd; |
| rport = lpfc_ncmd->nrport; |
| status = bf_get(lpfc_wcqe_c_status, wcqe); |
| |
| if (vport->localport) { |
| lport = (struct lpfc_nvme_lport *)vport->localport->private; |
| if (lport) { |
| idx = lpfc_ncmd->cur_iocbq.hba_wqidx; |
| cstat = &lport->cstat[idx]; |
| atomic_inc(&cstat->fc4NvmeIoCmpls); |
| if (status) { |
| if (bf_get(lpfc_wcqe_c_xb, wcqe)) |
| atomic_inc(&lport->cmpl_fcp_xb); |
| atomic_inc(&lport->cmpl_fcp_err); |
| } |
| } |
| } |
| |
| lpfc_nvmeio_data(phba, "NVME FCP CMPL: xri x%x stat x%x parm x%x\n", |
| lpfc_ncmd->cur_iocbq.sli4_xritag, |
| status, wcqe->parameter); |
| /* |
| * Catch race where our node has transitioned, but the |
| * transport is still transitioning. |
| */ |
| ndlp = rport->ndlp; |
| if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR, |
| "6061 rport %p, DID x%06x node not ready.\n", |
| rport, rport->remoteport->port_id); |
| |
| ndlp = lpfc_findnode_did(vport, rport->remoteport->port_id); |
| if (!ndlp) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR, |
| "6062 Ignoring NVME cmpl. No ndlp\n"); |
| goto out_err; |
| } |
| } |
| |
| code = bf_get(lpfc_wcqe_c_code, wcqe); |
| if (code == CQE_CODE_NVME_ERSP) { |
| /* For this type of CQE, we need to rebuild the rsp */ |
| ep = (struct nvme_fc_ersp_iu *)nCmd->rspaddr; |
| |
| /* |
| * Get Command Id from cmd to plug into response. This |
| * code is not needed in the next NVME Transport drop. |
| */ |
| cp = (struct nvme_fc_cmd_iu *)nCmd->cmdaddr; |
| cid = cp->sqe.common.command_id; |
| |
| /* |
| * RSN is in CQE word 2 |
| * SQHD is in CQE Word 3 bits 15:0 |
| * Cmd Specific info is in CQE Word 1 |
| * and in CQE Word 0 bits 15:0 |
| */ |
| sqhd = bf_get(lpfc_wcqe_c_sqhead, wcqe); |
| |
| /* Now lets build the NVME ERSP IU */ |
| ep->iu_len = cpu_to_be16(8); |
| ep->rsn = wcqe->parameter; |
| ep->xfrd_len = cpu_to_be32(nCmd->payload_length); |
| ep->rsvd12 = 0; |
| ptr = (uint32_t *)&ep->cqe.result.u64; |
| *ptr++ = wcqe->total_data_placed; |
| data = bf_get(lpfc_wcqe_c_ersp0, wcqe); |
| *ptr = (uint32_t)data; |
| ep->cqe.sq_head = sqhd; |
| ep->cqe.sq_id = nCmd->sqid; |
| ep->cqe.command_id = cid; |
| ep->cqe.status = 0; |
| |
| lpfc_ncmd->status = IOSTAT_SUCCESS; |
| lpfc_ncmd->result = 0; |
| nCmd->rcv_rsplen = LPFC_NVME_ERSP_LEN; |
| nCmd->transferred_length = nCmd->payload_length; |
| } else { |
| lpfc_ncmd->status = (status & LPFC_IOCB_STATUS_MASK); |
| lpfc_ncmd->result = (wcqe->parameter & IOERR_PARAM_MASK); |
| |
| /* For NVME, the only failure path that results in an |
| * IO error is when the adapter rejects it. All other |
| * conditions are a success case and resolved by the |
| * transport. |
| * IOSTAT_FCP_RSP_ERROR means: |
| * 1. Length of data received doesn't match total |
| * transfer length in WQE |
| * 2. If the RSP payload does NOT match these cases: |
| * a. RSP length 12/24 bytes and all zeros |
| * b. NVME ERSP |
| */ |
| switch (lpfc_ncmd->status) { |
| case IOSTAT_SUCCESS: |
| nCmd->transferred_length = wcqe->total_data_placed; |
| nCmd->rcv_rsplen = 0; |
| nCmd->status = 0; |
| break; |
| case IOSTAT_FCP_RSP_ERROR: |
| nCmd->transferred_length = wcqe->total_data_placed; |
| nCmd->rcv_rsplen = wcqe->parameter; |
| nCmd->status = 0; |
| /* Sanity check */ |
| if (nCmd->rcv_rsplen == LPFC_NVME_ERSP_LEN) |
| break; |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR, |
| "6081 NVME Completion Protocol Error: " |
| "xri %x status x%x result x%x " |
| "placed x%x\n", |
| lpfc_ncmd->cur_iocbq.sli4_xritag, |
| lpfc_ncmd->status, lpfc_ncmd->result, |
| wcqe->total_data_placed); |
| break; |
| case IOSTAT_LOCAL_REJECT: |
| /* Let fall through to set command final state. */ |
| if (lpfc_ncmd->result == IOERR_ABORT_REQUESTED) |
| lpfc_printf_vlog(vport, KERN_INFO, |
| LOG_NVME_IOERR, |
| "6032 Delay Aborted cmd %p " |
| "nvme cmd %p, xri x%x, " |
| "xb %d\n", |
| lpfc_ncmd, nCmd, |
| lpfc_ncmd->cur_iocbq.sli4_xritag, |
| bf_get(lpfc_wcqe_c_xb, wcqe)); |
| default: |
| out_err: |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR, |
| "6072 NVME Completion Error: xri %x " |
| "status x%x result x%x placed x%x\n", |
| lpfc_ncmd->cur_iocbq.sli4_xritag, |
| lpfc_ncmd->status, lpfc_ncmd->result, |
| wcqe->total_data_placed); |
| nCmd->transferred_length = 0; |
| nCmd->rcv_rsplen = 0; |
| nCmd->status = NVME_SC_INTERNAL; |
| } |
| } |
| |
| /* pick up SLI4 exhange busy condition */ |
| if (bf_get(lpfc_wcqe_c_xb, wcqe)) |
| lpfc_ncmd->flags |= LPFC_SBUF_XBUSY; |
| else |
| lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY; |
| |
| /* Update stats and complete the IO. There is |
| * no need for dma unprep because the nvme_transport |
| * owns the dma address. |
| */ |
| #ifdef CONFIG_SCSI_LPFC_DEBUG_FS |
| if (lpfc_ncmd->ts_cmd_start) { |
| lpfc_ncmd->ts_isr_cmpl = pwqeIn->isr_timestamp; |
| lpfc_ncmd->ts_data_nvme = ktime_get_ns(); |
| phba->ktime_last_cmd = lpfc_ncmd->ts_data_nvme; |
| lpfc_nvme_ktime(phba, lpfc_ncmd); |
| } |
| if (phba->cpucheck_on & LPFC_CHECK_NVME_IO) { |
| if (lpfc_ncmd->cpu != smp_processor_id()) |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR, |
| "6701 CPU Check cmpl: " |
| "cpu %d expect %d\n", |
| smp_processor_id(), lpfc_ncmd->cpu); |
| if (lpfc_ncmd->cpu < LPFC_CHECK_CPU_CNT) |
| phba->cpucheck_cmpl_io[lpfc_ncmd->cpu]++; |
| } |
| #endif |
| |
| /* NVME targets need completion held off until the abort exchange |
| * completes unless the NVME Rport is getting unregistered. |
| */ |
| |
| if (!(lpfc_ncmd->flags & LPFC_SBUF_XBUSY)) { |
| freqpriv = nCmd->private; |
| freqpriv->nvme_buf = NULL; |
| nCmd->done(nCmd); |
| lpfc_ncmd->nvmeCmd = NULL; |
| } |
| |
| spin_lock_irqsave(&phba->hbalock, flags); |
| lpfc_ncmd->nrport = NULL; |
| spin_unlock_irqrestore(&phba->hbalock, flags); |
| |
| /* Call release with XB=1 to queue the IO into the abort list. */ |
| lpfc_release_nvme_buf(phba, lpfc_ncmd); |
| } |
| |
| |
| /** |
| * lpfc_nvme_prep_io_cmd - Issue an NVME-over-FCP IO |
| * @lpfc_pnvme: Pointer to the driver's nvme instance data |
| * @lpfc_nvme_lport: Pointer to the driver's local port data |
| * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq |
| * @lpfc_nvme_fcreq: IO request from nvme fc to driver. |
| * @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue |
| * |
| * Driver registers this routine as it io request handler. This |
| * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq |
| * data structure to the rport indicated in @lpfc_nvme_rport. |
| * |
| * Return value : |
| * 0 - Success |
| * TODO: What are the failure codes. |
| **/ |
| static int |
| lpfc_nvme_prep_io_cmd(struct lpfc_vport *vport, |
| struct lpfc_nvme_buf *lpfc_ncmd, |
| struct lpfc_nodelist *pnode, |
| struct lpfc_nvme_ctrl_stat *cstat) |
| { |
| struct lpfc_hba *phba = vport->phba; |
| struct nvmefc_fcp_req *nCmd = lpfc_ncmd->nvmeCmd; |
| struct lpfc_iocbq *pwqeq = &(lpfc_ncmd->cur_iocbq); |
| union lpfc_wqe128 *wqe = &pwqeq->wqe; |
| uint32_t req_len; |
| |
| if (!pnode || !NLP_CHK_NODE_ACT(pnode)) |
| return -EINVAL; |
| |
| /* |
| * There are three possibilities here - use scatter-gather segment, use |
| * the single mapping, or neither. |
| */ |
| if (nCmd->sg_cnt) { |
| if (nCmd->io_dir == NVMEFC_FCP_WRITE) { |
| /* From the iwrite template, initialize words 7 - 11 */ |
| memcpy(&wqe->words[7], |
| &lpfc_iwrite_cmd_template.words[7], |
| sizeof(uint32_t) * 5); |
| |
| /* Word 4 */ |
| wqe->fcp_iwrite.total_xfer_len = nCmd->payload_length; |
| |
| /* Word 5 */ |
| if ((phba->cfg_nvme_enable_fb) && |
| (pnode->nlp_flag & NLP_FIRSTBURST)) { |
| req_len = lpfc_ncmd->nvmeCmd->payload_length; |
| if (req_len < pnode->nvme_fb_size) |
| wqe->fcp_iwrite.initial_xfer_len = |
| req_len; |
| else |
| wqe->fcp_iwrite.initial_xfer_len = |
| pnode->nvme_fb_size; |
| } else { |
| wqe->fcp_iwrite.initial_xfer_len = 0; |
| } |
| atomic_inc(&cstat->fc4NvmeOutputRequests); |
| } else { |
| /* From the iread template, initialize words 7 - 11 */ |
| memcpy(&wqe->words[7], |
| &lpfc_iread_cmd_template.words[7], |
| sizeof(uint32_t) * 5); |
| |
| /* Word 4 */ |
| wqe->fcp_iread.total_xfer_len = nCmd->payload_length; |
| |
| /* Word 5 */ |
| wqe->fcp_iread.rsrvd5 = 0; |
| |
| atomic_inc(&cstat->fc4NvmeInputRequests); |
| } |
| } else { |
| /* From the icmnd template, initialize words 4 - 11 */ |
| memcpy(&wqe->words[4], &lpfc_icmnd_cmd_template.words[4], |
| sizeof(uint32_t) * 8); |
| atomic_inc(&cstat->fc4NvmeControlRequests); |
| } |
| /* |
| * Finish initializing those WQE fields that are independent |
| * of the nvme_cmnd request_buffer |
| */ |
| |
| /* Word 3 */ |
| bf_set(payload_offset_len, &wqe->fcp_icmd, |
| (nCmd->rsplen + nCmd->cmdlen)); |
| |
| /* Word 6 */ |
| bf_set(wqe_ctxt_tag, &wqe->generic.wqe_com, |
| phba->sli4_hba.rpi_ids[pnode->nlp_rpi]); |
| bf_set(wqe_xri_tag, &wqe->generic.wqe_com, pwqeq->sli4_xritag); |
| |
| /* Word 8 */ |
| wqe->generic.wqe_com.abort_tag = pwqeq->iotag; |
| |
| /* Word 9 */ |
| bf_set(wqe_reqtag, &wqe->generic.wqe_com, pwqeq->iotag); |
| |
| /* Words 13 14 15 are for PBDE support */ |
| |
| pwqeq->vport = vport; |
| return 0; |
| } |
| |
| |
| /** |
| * lpfc_nvme_prep_io_dma - Issue an NVME-over-FCP IO |
| * @lpfc_pnvme: Pointer to the driver's nvme instance data |
| * @lpfc_nvme_lport: Pointer to the driver's local port data |
| * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq |
| * @lpfc_nvme_fcreq: IO request from nvme fc to driver. |
| * @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue |
| * |
| * Driver registers this routine as it io request handler. This |
| * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq |
| * data structure to the rport indicated in @lpfc_nvme_rport. |
| * |
| * Return value : |
| * 0 - Success |
| * TODO: What are the failure codes. |
| **/ |
| static int |
| lpfc_nvme_prep_io_dma(struct lpfc_vport *vport, |
| struct lpfc_nvme_buf *lpfc_ncmd) |
| { |
| struct lpfc_hba *phba = vport->phba; |
| struct nvmefc_fcp_req *nCmd = lpfc_ncmd->nvmeCmd; |
| union lpfc_wqe128 *wqe = &lpfc_ncmd->cur_iocbq.wqe; |
| struct sli4_sge *sgl = lpfc_ncmd->nvme_sgl; |
| struct scatterlist *data_sg; |
| struct sli4_sge *first_data_sgl; |
| struct ulp_bde64 *bde; |
| dma_addr_t physaddr; |
| uint32_t num_bde = 0; |
| uint32_t dma_len; |
| uint32_t dma_offset = 0; |
| int nseg, i; |
| |
| /* Fix up the command and response DMA stuff. */ |
| lpfc_nvme_adj_fcp_sgls(vport, lpfc_ncmd, nCmd); |
| |
| /* |
| * There are three possibilities here - use scatter-gather segment, use |
| * the single mapping, or neither. |
| */ |
| if (nCmd->sg_cnt) { |
| /* |
| * Jump over the cmd and rsp SGEs. The fix routine |
| * has already adjusted for this. |
| */ |
| sgl += 2; |
| |
| first_data_sgl = sgl; |
| lpfc_ncmd->seg_cnt = nCmd->sg_cnt; |
| if (lpfc_ncmd->seg_cnt > lpfc_nvme_template.max_sgl_segments) { |
| lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR, |
| "6058 Too many sg segments from " |
| "NVME Transport. Max %d, " |
| "nvmeIO sg_cnt %d\n", |
| phba->cfg_nvme_seg_cnt + 1, |
| lpfc_ncmd->seg_cnt); |
| lpfc_ncmd->seg_cnt = 0; |
| return 1; |
| } |
| |
| /* |
| * The driver established a maximum scatter-gather segment count |
| * during probe that limits the number of sg elements in any |
| * single nvme command. Just run through the seg_cnt and format |
| * the sge's. |
| */ |
| nseg = nCmd->sg_cnt; |
| data_sg = nCmd->first_sgl; |
| for (i = 0; i < nseg; i++) { |
| if (data_sg == NULL) { |
| lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR, |
| "6059 dptr err %d, nseg %d\n", |
| i, nseg); |
| lpfc_ncmd->seg_cnt = 0; |
| return 1; |
| } |
| physaddr = data_sg->dma_address; |
| dma_len = data_sg->length; |
| sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr)); |
| sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr)); |
| sgl->word2 = le32_to_cpu(sgl->word2); |
| if ((num_bde + 1) == nseg) |
| bf_set(lpfc_sli4_sge_last, sgl, 1); |
| else |
| bf_set(lpfc_sli4_sge_last, sgl, 0); |
| bf_set(lpfc_sli4_sge_offset, sgl, dma_offset); |
| bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA); |
| sgl->word2 = cpu_to_le32(sgl->word2); |
| sgl->sge_len = cpu_to_le32(dma_len); |
| |
| dma_offset += dma_len; |
| data_sg = sg_next(data_sg); |
| sgl++; |
| } |
| if (phba->cfg_enable_pbde) { |
| /* Use PBDE support for first SGL only, offset == 0 */ |
| /* Words 13-15 */ |
| bde = (struct ulp_bde64 *) |
| &wqe->words[13]; |
| bde->addrLow = first_data_sgl->addr_lo; |
| bde->addrHigh = first_data_sgl->addr_hi; |
| bde->tus.f.bdeSize = |
| le32_to_cpu(first_data_sgl->sge_len); |
| bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64; |
| bde->tus.w = cpu_to_le32(bde->tus.w); |
| /* wqe_pbde is 1 in template */ |
| } else { |
| memset(&wqe->words[13], 0, (sizeof(uint32_t) * 3)); |
| bf_set(wqe_pbde, &wqe->generic.wqe_com, 0); |
| } |
| |
| } else { |
| /* For this clause to be valid, the payload_length |
| * and sg_cnt must zero. |
| */ |
| if (nCmd->payload_length != 0) { |
| lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR, |
| "6063 NVME DMA Prep Err: sg_cnt %d " |
| "payload_length x%x\n", |
| nCmd->sg_cnt, nCmd->payload_length); |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| /** |
| * lpfc_nvme_fcp_io_submit - Issue an NVME-over-FCP IO |
| * @lpfc_pnvme: Pointer to the driver's nvme instance data |
| * @lpfc_nvme_lport: Pointer to the driver's local port data |
| * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq |
| * @lpfc_nvme_fcreq: IO request from nvme fc to driver. |
| * @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue |
| * |
| * Driver registers this routine as it io request handler. This |
| * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq |
| * data structure to the rport |
| indicated in @lpfc_nvme_rport. |
| * |
| * Return value : |
| * 0 - Success |
| * TODO: What are the failure codes. |
| **/ |
| static int |
| lpfc_nvme_fcp_io_submit(struct nvme_fc_local_port *pnvme_lport, |
| struct nvme_fc_remote_port *pnvme_rport, |
| void *hw_queue_handle, |
| struct nvmefc_fcp_req *pnvme_fcreq) |
| { |
| int ret = 0; |
| int expedite = 0; |
| int idx; |
| struct lpfc_nvme_lport *lport; |
| struct lpfc_nvme_ctrl_stat *cstat; |
| struct lpfc_vport *vport; |
| struct lpfc_hba *phba; |
| struct lpfc_nodelist *ndlp; |
| struct lpfc_nvme_buf *lpfc_ncmd; |
| struct lpfc_nvme_rport *rport; |
| struct lpfc_nvme_qhandle *lpfc_queue_info; |
| struct lpfc_nvme_fcpreq_priv *freqpriv; |
| struct nvme_common_command *sqe; |
| #ifdef CONFIG_SCSI_LPFC_DEBUG_FS |
| uint64_t start = 0; |
| #endif |
| |
| /* Validate pointers. LLDD fault handling with transport does |
| * have timing races. |
| */ |
| lport = (struct lpfc_nvme_lport *)pnvme_lport->private; |
| if (unlikely(!lport)) { |
| ret = -EINVAL; |
| goto out_fail; |
| } |
| |
| vport = lport->vport; |
| |
| if (unlikely(!hw_queue_handle)) { |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR, |
| "6117 Fail IO, NULL hw_queue_handle\n"); |
| atomic_inc(&lport->xmt_fcp_err); |
| ret = -EBUSY; |
| goto out_fail; |
| } |
| |
| phba = vport->phba; |
| |
| if (vport->load_flag & FC_UNLOADING) { |
| ret = -ENODEV; |
| goto out_fail; |
| } |
| |
| if (vport->load_flag & FC_UNLOADING) { |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR, |
| "6124 Fail IO, Driver unload\n"); |
| atomic_inc(&lport->xmt_fcp_err); |
| ret = -ENODEV; |
| goto out_fail; |
| } |
| |
| freqpriv = pnvme_fcreq->private; |
| if (unlikely(!freqpriv)) { |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR, |
| "6158 Fail IO, NULL request data\n"); |
| atomic_inc(&lport->xmt_fcp_err); |
| ret = -EINVAL; |
| goto out_fail; |
| } |
| |
| #ifdef CONFIG_SCSI_LPFC_DEBUG_FS |
| if (phba->ktime_on) |
| start = ktime_get_ns(); |
| #endif |
| rport = (struct lpfc_nvme_rport *)pnvme_rport->private; |
| lpfc_queue_info = (struct lpfc_nvme_qhandle *)hw_queue_handle; |
| |
| /* |
| * Catch race where our node has transitioned, but the |
| * transport is still transitioning. |
| */ |
| ndlp = rport->ndlp; |
| if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) { |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE | LOG_NVME_IOERR, |
| "6053 Fail IO, ndlp not ready: rport %p " |
| "ndlp %p, DID x%06x\n", |
| rport, ndlp, pnvme_rport->port_id); |
| atomic_inc(&lport->xmt_fcp_err); |
| ret = -EBUSY; |
| goto out_fail; |
| } |
| |
| /* The remote node has to be a mapped target or it's an error. */ |
| if ((ndlp->nlp_type & NLP_NVME_TARGET) && |
| (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) { |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE | LOG_NVME_IOERR, |
| "6036 Fail IO, DID x%06x not ready for " |
| "IO. State x%x, Type x%x Flg x%x\n", |
| pnvme_rport->port_id, |
| ndlp->nlp_state, ndlp->nlp_type, |
| ndlp->upcall_flags); |
| atomic_inc(&lport->xmt_fcp_bad_ndlp); |
| ret = -EBUSY; |
| goto out_fail; |
| |
| } |
| |
| /* Currently only NVME Keep alive commands should be expedited |
| * if the driver runs out of a resource. These should only be |
| * issued on the admin queue, qidx 0 |
| */ |
| if (!lpfc_queue_info->qidx && !pnvme_fcreq->sg_cnt) { |
| sqe = &((struct nvme_fc_cmd_iu *) |
| pnvme_fcreq->cmdaddr)->sqe.common; |
| if (sqe->opcode == nvme_admin_keep_alive) |
| expedite = 1; |
| } |
| |
| /* The node is shared with FCP IO, make sure the IO pending count does |
| * not exceed the programmed depth. |
| */ |
| if (lpfc_ndlp_check_qdepth(phba, ndlp)) { |
| if ((atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth) && |
| !expedite) { |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR, |
| "6174 Fail IO, ndlp qdepth exceeded: " |
| "idx %d DID %x pend %d qdepth %d\n", |
| lpfc_queue_info->index, ndlp->nlp_DID, |
| atomic_read(&ndlp->cmd_pending), |
| ndlp->cmd_qdepth); |
| atomic_inc(&lport->xmt_fcp_qdepth); |
| ret = -EBUSY; |
| goto out_fail; |
| } |
| } |
| |
| lpfc_ncmd = lpfc_get_nvme_buf(phba, ndlp, expedite); |
| if (lpfc_ncmd == NULL) { |
| atomic_inc(&lport->xmt_fcp_noxri); |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR, |
| "6065 Fail IO, driver buffer pool is empty: " |
| "idx %d DID %x\n", |
| lpfc_queue_info->index, ndlp->nlp_DID); |
| ret = -EBUSY; |
| goto out_fail; |
| } |
| #ifdef CONFIG_SCSI_LPFC_DEBUG_FS |
| if (start) { |
| lpfc_ncmd->ts_cmd_start = start; |
| lpfc_ncmd->ts_last_cmd = phba->ktime_last_cmd; |
| } else { |
| lpfc_ncmd->ts_cmd_start = 0; |
| } |
| #endif |
| |
| /* |
| * Store the data needed by the driver to issue, abort, and complete |
| * an IO. |
| * Do not let the IO hang out forever. There is no midlayer issuing |
| * an abort so inform the FW of the maximum IO pending time. |
| */ |
| freqpriv->nvme_buf = lpfc_ncmd; |
| lpfc_ncmd->nvmeCmd = pnvme_fcreq; |
| lpfc_ncmd->nrport = rport; |
| lpfc_ncmd->ndlp = ndlp; |
| lpfc_ncmd->start_time = jiffies; |
| |
| /* |
| * Issue the IO on the WQ indicated by index in the hw_queue_handle. |
| * This identfier was create in our hardware queue create callback |
| * routine. The driver now is dependent on the IO queue steering from |
| * the transport. We are trusting the upper NVME layers know which |
| * index to use and that they have affinitized a CPU to this hardware |
| * queue. A hardware queue maps to a driver MSI-X vector/EQ/CQ/WQ. |
| */ |
| idx = lpfc_queue_info->index; |
| lpfc_ncmd->cur_iocbq.hba_wqidx = idx; |
| cstat = &lport->cstat[idx]; |
| |
| lpfc_nvme_prep_io_cmd(vport, lpfc_ncmd, ndlp, cstat); |
| ret = lpfc_nvme_prep_io_dma(vport, lpfc_ncmd); |
| if (ret) { |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR, |
| "6175 Fail IO, Prep DMA: " |
| "idx %d DID %x\n", |
| lpfc_queue_info->index, ndlp->nlp_DID); |
| atomic_inc(&lport->xmt_fcp_err); |
| ret = -ENOMEM; |
| goto out_free_nvme_buf; |
| } |
| |
| lpfc_nvmeio_data(phba, "NVME FCP XMIT: xri x%x idx %d to %06x\n", |
| lpfc_ncmd->cur_iocbq.sli4_xritag, |
| lpfc_queue_info->index, ndlp->nlp_DID); |
| |
| ret = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, &lpfc_ncmd->cur_iocbq); |
| if (ret) { |
| atomic_inc(&lport->xmt_fcp_wqerr); |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR, |
| "6113 Fail IO, Could not issue WQE err %x " |
| "sid: x%x did: x%x oxid: x%x\n", |
| ret, vport->fc_myDID, ndlp->nlp_DID, |
| lpfc_ncmd->cur_iocbq.sli4_xritag); |
| goto out_free_nvme_buf; |
| } |
| |
| #ifdef CONFIG_SCSI_LPFC_DEBUG_FS |
| if (lpfc_ncmd->ts_cmd_start) |
| lpfc_ncmd->ts_cmd_wqput = ktime_get_ns(); |
| |
| if (phba->cpucheck_on & LPFC_CHECK_NVME_IO) { |
| lpfc_ncmd->cpu = smp_processor_id(); |
| if (lpfc_ncmd->cpu != lpfc_queue_info->index) { |
| /* Check for admin queue */ |
| if (lpfc_queue_info->qidx) { |
| lpfc_printf_vlog(vport, |
| KERN_ERR, LOG_NVME_IOERR, |
| "6702 CPU Check cmd: " |
| "cpu %d wq %d\n", |
| lpfc_ncmd->cpu, |
| lpfc_queue_info->index); |
| } |
| lpfc_ncmd->cpu = lpfc_queue_info->index; |
| } |
| if (lpfc_ncmd->cpu < LPFC_CHECK_CPU_CNT) |
| phba->cpucheck_xmt_io[lpfc_ncmd->cpu]++; |
| } |
| #endif |
| return 0; |
| |
| out_free_nvme_buf: |
| if (lpfc_ncmd->nvmeCmd->sg_cnt) { |
| if (lpfc_ncmd->nvmeCmd->io_dir == NVMEFC_FCP_WRITE) |
| atomic_dec(&cstat->fc4NvmeOutputRequests); |
| else |
| atomic_dec(&cstat->fc4NvmeInputRequests); |
| } else |
| atomic_dec(&cstat->fc4NvmeControlRequests); |
| lpfc_release_nvme_buf(phba, lpfc_ncmd); |
| out_fail: |
| return ret; |
| } |
| |
| /** |
| * lpfc_nvme_abort_fcreq_cmpl - Complete an NVME FCP abort request. |
| * @phba: Pointer to HBA context object |
| * @cmdiocb: Pointer to command iocb object. |
| * @rspiocb: Pointer to response iocb object. |
| * |
| * This is the callback function for any NVME FCP IO that was aborted. |
| * |
| * Return value: |
| * None |
| **/ |
| void |
| lpfc_nvme_abort_fcreq_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, |
| struct lpfc_wcqe_complete *abts_cmpl) |
| { |
| lpfc_printf_log(phba, KERN_INFO, LOG_NVME, |
| "6145 ABORT_XRI_CN completing on rpi x%x " |
| "original iotag x%x, abort cmd iotag x%x " |
| "req_tag x%x, status x%x, hwstatus x%x\n", |
| cmdiocb->iocb.un.acxri.abortContextTag, |
| cmdiocb->iocb.un.acxri.abortIoTag, |
| cmdiocb->iotag, |
| bf_get(lpfc_wcqe_c_request_tag, abts_cmpl), |
| bf_get(lpfc_wcqe_c_status, abts_cmpl), |
| bf_get(lpfc_wcqe_c_hw_status, abts_cmpl)); |
| lpfc_sli_release_iocbq(phba, cmdiocb); |
| } |
| |
| /** |
| * lpfc_nvme_fcp_abort - Issue an NVME-over-FCP ABTS |
| * @lpfc_pnvme: Pointer to the driver's nvme instance data |
| * @lpfc_nvme_lport: Pointer to the driver's local port data |
| * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq |
| * @lpfc_nvme_fcreq: IO request from nvme fc to driver. |
| * @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue |
| * |
| * Driver registers this routine as its nvme request io abort handler. This |
| * routine issues an fcp Abort WQE with data from the @lpfc_nvme_fcpreq |
| * data structure to the rport indicated in @lpfc_nvme_rport. This routine |
| * is executed asynchronously - one the target is validated as "MAPPED" and |
| * ready for IO, the driver issues the abort request and returns. |
| * |
| * Return value: |
| * None |
| **/ |
| static void |
| lpfc_nvme_fcp_abort(struct nvme_fc_local_port *pnvme_lport, |
| struct nvme_fc_remote_port *pnvme_rport, |
| void *hw_queue_handle, |
| struct nvmefc_fcp_req *pnvme_fcreq) |
| { |
| struct lpfc_nvme_lport *lport; |
| struct lpfc_vport *vport; |
| struct lpfc_hba *phba; |
| struct lpfc_nvme_buf *lpfc_nbuf; |
| struct lpfc_iocbq *abts_buf; |
| struct lpfc_iocbq *nvmereq_wqe; |
| struct lpfc_nvme_fcpreq_priv *freqpriv; |
| union lpfc_wqe128 *abts_wqe; |
| unsigned long flags; |
| int ret_val; |
| |
| /* Validate pointers. LLDD fault handling with transport does |
| * have timing races. |
| */ |
| lport = (struct lpfc_nvme_lport *)pnvme_lport->private; |
| if (unlikely(!lport)) |
| return; |
| |
| vport = lport->vport; |
| |
| if (unlikely(!hw_queue_handle)) { |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_ABTS, |
| "6129 Fail Abort, HW Queue Handle NULL.\n"); |
| return; |
| } |
| |
| phba = vport->phba; |
| freqpriv = pnvme_fcreq->private; |
| |
| if (unlikely(!freqpriv)) |
| return; |
| if (vport->load_flag & FC_UNLOADING) |
| return; |
| |
| /* Announce entry to new IO submit field. */ |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_ABTS, |
| "6002 Abort Request to rport DID x%06x " |
| "for nvme_fc_req %p\n", |
| pnvme_rport->port_id, |
| pnvme_fcreq); |
| |
| /* If the hba is getting reset, this flag is set. It is |
| * cleared when the reset is complete and rings reestablished. |
| */ |
| spin_lock_irqsave(&phba->hbalock, flags); |
| /* driver queued commands are in process of being flushed */ |
| if (phba->hba_flag & HBA_NVME_IOQ_FLUSH) { |
| spin_unlock_irqrestore(&phba->hbalock, flags); |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS, |
| "6139 Driver in reset cleanup - flushing " |
| "NVME Req now. hba_flag x%x\n", |
| phba->hba_flag); |
| return; |
| } |
| |
| lpfc_nbuf = freqpriv->nvme_buf; |
| if (!lpfc_nbuf) { |
| spin_unlock_irqrestore(&phba->hbalock, flags); |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS, |
| "6140 NVME IO req has no matching lpfc nvme " |
| "io buffer. Skipping abort req.\n"); |
| return; |
| } else if (!lpfc_nbuf->nvmeCmd) { |
| spin_unlock_irqrestore(&phba->hbalock, flags); |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS, |
| "6141 lpfc NVME IO req has no nvme_fcreq " |
| "io buffer. Skipping abort req.\n"); |
| return; |
| } |
| nvmereq_wqe = &lpfc_nbuf->cur_iocbq; |
| |
| /* |
| * The lpfc_nbuf and the mapped nvme_fcreq in the driver's |
| * state must match the nvme_fcreq passed by the nvme |
| * transport. If they don't match, it is likely the driver |
| * has already completed the NVME IO and the nvme transport |
| * has not seen it yet. |
| */ |
| if (lpfc_nbuf->nvmeCmd != pnvme_fcreq) { |
| spin_unlock_irqrestore(&phba->hbalock, flags); |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS, |
| "6143 NVME req mismatch: " |
| "lpfc_nbuf %p nvmeCmd %p, " |
| "pnvme_fcreq %p. Skipping Abort xri x%x\n", |
| lpfc_nbuf, lpfc_nbuf->nvmeCmd, |
| pnvme_fcreq, nvmereq_wqe->sli4_xritag); |
| return; |
| } |
| |
| /* Don't abort IOs no longer on the pending queue. */ |
| if (!(nvmereq_wqe->iocb_flag & LPFC_IO_ON_TXCMPLQ)) { |
| spin_unlock_irqrestore(&phba->hbalock, flags); |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS, |
| "6142 NVME IO req %p not queued - skipping " |
| "abort req xri x%x\n", |
| pnvme_fcreq, nvmereq_wqe->sli4_xritag); |
| return; |
| } |
| |
| atomic_inc(&lport->xmt_fcp_abort); |
| lpfc_nvmeio_data(phba, "NVME FCP ABORT: xri x%x idx %d to %06x\n", |
| nvmereq_wqe->sli4_xritag, |
| nvmereq_wqe->hba_wqidx, pnvme_rport->port_id); |
| |
| /* Outstanding abort is in progress */ |
| if (nvmereq_wqe->iocb_flag & LPFC_DRIVER_ABORTED) { |
| spin_unlock_irqrestore(&phba->hbalock, flags); |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS, |
| "6144 Outstanding NVME I/O Abort Request " |
| "still pending on nvme_fcreq %p, " |
| "lpfc_ncmd %p xri x%x\n", |
| pnvme_fcreq, lpfc_nbuf, |
| nvmereq_wqe->sli4_xritag); |
| return; |
| } |
| |
| abts_buf = __lpfc_sli_get_iocbq(phba); |
| if (!abts_buf) { |
| spin_unlock_irqrestore(&phba->hbalock, flags); |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS, |
| "6136 No available abort wqes. Skipping " |
| "Abts req for nvme_fcreq %p xri x%x\n", |
| pnvme_fcreq, nvmereq_wqe->sli4_xritag); |
| return; |
| } |
| |
| /* Ready - mark outstanding as aborted by driver. */ |
| nvmereq_wqe->iocb_flag |= LPFC_DRIVER_ABORTED; |
| |
| /* Complete prepping the abort wqe and issue to the FW. */ |
| abts_wqe = &abts_buf->wqe; |
| |
| /* WQEs are reused. Clear stale data and set key fields to |
| * zero like ia, iaab, iaar, xri_tag, and ctxt_tag. |
| */ |
| memset(abts_wqe, 0, sizeof(union lpfc_wqe)); |
| bf_set(abort_cmd_criteria, &abts_wqe->abort_cmd, T_XRI_TAG); |
| |
| /* word 7 */ |
| bf_set(wqe_ct, &abts_wqe->abort_cmd.wqe_com, 0); |
| bf_set(wqe_cmnd, &abts_wqe->abort_cmd.wqe_com, CMD_ABORT_XRI_CX); |
| bf_set(wqe_class, &abts_wqe->abort_cmd.wqe_com, |
| nvmereq_wqe->iocb.ulpClass); |
| |
| /* word 8 - tell the FW to abort the IO associated with this |
| * outstanding exchange ID. |
| */ |
| abts_wqe->abort_cmd.wqe_com.abort_tag = nvmereq_wqe->sli4_xritag; |
| |
| /* word 9 - this is the iotag for the abts_wqe completion. */ |
| bf_set(wqe_reqtag, &abts_wqe->abort_cmd.wqe_com, |
| abts_buf->iotag); |
| |
| /* word 10 */ |
| bf_set(wqe_wqid, &abts_wqe->abort_cmd.wqe_com, nvmereq_wqe->hba_wqidx); |
| bf_set(wqe_qosd, &abts_wqe->abort_cmd.wqe_com, 1); |
| bf_set(wqe_lenloc, &abts_wqe->abort_cmd.wqe_com, LPFC_WQE_LENLOC_NONE); |
| |
| /* word 11 */ |
| bf_set(wqe_cmd_type, &abts_wqe->abort_cmd.wqe_com, OTHER_COMMAND); |
| bf_set(wqe_wqec, &abts_wqe->abort_cmd.wqe_com, 1); |
| bf_set(wqe_cqid, &abts_wqe->abort_cmd.wqe_com, LPFC_WQE_CQ_ID_DEFAULT); |
| |
| /* ABTS WQE must go to the same WQ as the WQE to be aborted */ |
| abts_buf->iocb_flag |= LPFC_IO_NVME; |
| abts_buf->hba_wqidx = nvmereq_wqe->hba_wqidx; |
| abts_buf->vport = vport; |
| abts_buf->wqe_cmpl = lpfc_nvme_abort_fcreq_cmpl; |
| ret_val = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, abts_buf); |
| spin_unlock_irqrestore(&phba->hbalock, flags); |
| if (ret_val) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS, |
| "6137 Failed abts issue_wqe with status x%x " |
| "for nvme_fcreq %p.\n", |
| ret_val, pnvme_fcreq); |
| lpfc_sli_release_iocbq(phba, abts_buf); |
| return; |
| } |
| |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_ABTS, |
| "6138 Transport Abort NVME Request Issued for " |
| "ox_id x%x on reqtag x%x\n", |
| nvmereq_wqe->sli4_xritag, |
| abts_buf->iotag); |
| } |
| |
| /* Declare and initialization an instance of the FC NVME template. */ |
| static struct nvme_fc_port_template lpfc_nvme_template = { |
| /* initiator-based functions */ |
| .localport_delete = lpfc_nvme_localport_delete, |
| .remoteport_delete = lpfc_nvme_remoteport_delete, |
| .create_queue = lpfc_nvme_create_queue, |
| .delete_queue = lpfc_nvme_delete_queue, |
| .ls_req = lpfc_nvme_ls_req, |
| .fcp_io = lpfc_nvme_fcp_io_submit, |
| .ls_abort = lpfc_nvme_ls_abort, |
| .fcp_abort = lpfc_nvme_fcp_abort, |
| |
| .max_hw_queues = 1, |
| .max_sgl_segments = LPFC_NVME_DEFAULT_SEGS, |
| .max_dif_sgl_segments = LPFC_NVME_DEFAULT_SEGS, |
| .dma_boundary = 0xFFFFFFFF, |
| |
| /* Sizes of additional private data for data structures. |
| * No use for the last two sizes at this time. |
| */ |
| .local_priv_sz = sizeof(struct lpfc_nvme_lport), |
| .remote_priv_sz = sizeof(struct lpfc_nvme_rport), |
| .lsrqst_priv_sz = 0, |
| .fcprqst_priv_sz = sizeof(struct lpfc_nvme_fcpreq_priv), |
| }; |
| |
| /** |
| * lpfc_sli4_post_nvme_sgl_block - post a block of nvme sgl list to firmware |
| * @phba: pointer to lpfc hba data structure. |
| * @nblist: pointer to nvme buffer list. |
| * @count: number of scsi buffers on the list. |
| * |
| * This routine is invoked to post a block of @count scsi sgl pages from a |
| * SCSI buffer list @nblist to the HBA using non-embedded mailbox command. |
| * No Lock is held. |
| * |
| **/ |
| static int |
| lpfc_sli4_post_nvme_sgl_block(struct lpfc_hba *phba, |
| struct list_head *nblist, |
| int count) |
| { |
| struct lpfc_nvme_buf *lpfc_ncmd; |
| struct lpfc_mbx_post_uembed_sgl_page1 *sgl; |
| struct sgl_page_pairs *sgl_pg_pairs; |
| void *viraddr; |
| LPFC_MBOXQ_t *mbox; |
| uint32_t reqlen, alloclen, pg_pairs; |
| uint32_t mbox_tmo; |
| uint16_t xritag_start = 0; |
| int rc = 0; |
| uint32_t shdr_status, shdr_add_status; |
| dma_addr_t pdma_phys_bpl1; |
| union lpfc_sli4_cfg_shdr *shdr; |
| |
| /* Calculate the requested length of the dma memory */ |
| reqlen = count * sizeof(struct sgl_page_pairs) + |
| sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t); |
| if (reqlen > SLI4_PAGE_SIZE) { |
| lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
| "6118 Block sgl registration required DMA " |
| "size (%d) great than a page\n", reqlen); |
| return -ENOMEM; |
| } |
| mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); |
| if (!mbox) { |
| lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
| "6119 Failed to allocate mbox cmd memory\n"); |
| return -ENOMEM; |
| } |
| |
| /* Allocate DMA memory and set up the non-embedded mailbox command */ |
| alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE, |
| LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen, |
| LPFC_SLI4_MBX_NEMBED); |
| |
| if (alloclen < reqlen) { |
| lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
| "6120 Allocated DMA memory size (%d) is " |
| "less than the requested DMA memory " |
| "size (%d)\n", alloclen, reqlen); |
| lpfc_sli4_mbox_cmd_free(phba, mbox); |
| return -ENOMEM; |
| } |
| |
| /* Get the first SGE entry from the non-embedded DMA memory */ |
| viraddr = mbox->sge_array->addr[0]; |
| |
| /* Set up the SGL pages in the non-embedded DMA pages */ |
| sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr; |
| sgl_pg_pairs = &sgl->sgl_pg_pairs; |
| |
| pg_pairs = 0; |
| list_for_each_entry(lpfc_ncmd, nblist, list) { |
| /* Set up the sge entry */ |
| sgl_pg_pairs->sgl_pg0_addr_lo = |
| cpu_to_le32(putPaddrLow(lpfc_ncmd->dma_phys_sgl)); |
| sgl_pg_pairs->sgl_pg0_addr_hi = |
| cpu_to_le32(putPaddrHigh(lpfc_ncmd->dma_phys_sgl)); |
| if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE) |
| pdma_phys_bpl1 = lpfc_ncmd->dma_phys_sgl + |
| SGL_PAGE_SIZE; |
| else |
| pdma_phys_bpl1 = 0; |
| sgl_pg_pairs->sgl_pg1_addr_lo = |
| cpu_to_le32(putPaddrLow(pdma_phys_bpl1)); |
| sgl_pg_pairs->sgl_pg1_addr_hi = |
| cpu_to_le32(putPaddrHigh(pdma_phys_bpl1)); |
| /* Keep the first xritag on the list */ |
| if (pg_pairs == 0) |
| xritag_start = lpfc_ncmd->cur_iocbq.sli4_xritag; |
| sgl_pg_pairs++; |
| pg_pairs++; |
| } |
| bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start); |
| bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs); |
| /* Perform endian conversion if necessary */ |
| sgl->word0 = cpu_to_le32(sgl->word0); |
| |
| if (!phba->sli4_hba.intr_enable) |
| rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); |
| else { |
| mbox_tmo = lpfc_mbox_tmo_val(phba, mbox); |
| rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo); |
| } |
| shdr = (union lpfc_sli4_cfg_shdr *)&sgl->cfg_shdr; |
| shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); |
| shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); |
| if (rc != MBX_TIMEOUT) |
| lpfc_sli4_mbox_cmd_free(phba, mbox); |
| if (shdr_status || shdr_add_status || rc) { |
| lpfc_printf_log(phba, KERN_ERR, LOG_SLI, |
| "6125 POST_SGL_BLOCK mailbox command failed " |
| "status x%x add_status x%x mbx status x%x\n", |
| shdr_status, shdr_add_status, rc); |
| rc = -ENXIO; |
| } |
| return rc; |
| } |
| |
| /** |
| * lpfc_post_nvme_sgl_list - Post blocks of nvme buffer sgls from a list |
| * @phba: pointer to lpfc hba data structure. |
| * @post_nblist: pointer to the nvme buffer list. |
| * |
| * This routine walks a list of nvme buffers that was passed in. It attempts |
| * to construct blocks of nvme buffer sgls which contains contiguous xris and |
| * uses the non-embedded SGL block post mailbox commands to post to the port. |
| * For single NVME buffer sgl with non-contiguous xri, if any, it shall use |
| * embedded SGL post mailbox command for posting. The @post_nblist passed in |
| * must be local list, thus no lock is needed when manipulate the list. |
| * |
| * Returns: 0 = failure, non-zero number of successfully posted buffers. |
| **/ |
| static int |
| lpfc_post_nvme_sgl_list(struct lpfc_hba *phba, |
| struct list_head *post_nblist, int sb_count) |
| { |
| struct lpfc_nvme_buf *lpfc_ncmd, *lpfc_ncmd_next; |
| int status, sgl_size; |
| int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0; |
| dma_addr_t pdma_phys_sgl1; |
| int last_xritag = NO_XRI; |
| int cur_xritag; |
| LIST_HEAD(prep_nblist); |
| LIST_HEAD(blck_nblist); |
| LIST_HEAD(nvme_nblist); |
| |
| /* sanity check */ |
| if (sb_count <= 0) |
| return -EINVAL; |
| |
| sgl_size = phba->cfg_sg_dma_buf_size; |
| |
| list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next, post_nblist, list) { |
| list_del_init(&lpfc_ncmd->list); |
| block_cnt++; |
| if ((last_xritag != NO_XRI) && |
| (lpfc_ncmd->cur_iocbq.sli4_xritag != last_xritag + 1)) { |
| /* a hole in xri block, form a sgl posting block */ |
| list_splice_init(&prep_nblist, &blck_nblist); |
| post_cnt = block_cnt - 1; |
| /* prepare list for next posting block */ |
| list_add_tail(&lpfc_ncmd->list, &prep_nblist); |
| block_cnt = 1; |
| } else { |
| /* prepare list for next posting block */ |
| list_add_tail(&lpfc_ncmd->list, &prep_nblist); |
| /* enough sgls for non-embed sgl mbox command */ |
| if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) { |
| list_splice_init(&prep_nblist, &blck_nblist); |
| post_cnt = block_cnt; |
| block_cnt = 0; |
| } |
| } |
| num_posting++; |
| last_xritag = lpfc_ncmd->cur_iocbq.sli4_xritag; |
| |
| /* end of repost sgl list condition for NVME buffers */ |
| if (num_posting == sb_count) { |
| if (post_cnt == 0) { |
| /* last sgl posting block */ |
| list_splice_init(&prep_nblist, &blck_nblist); |
| post_cnt = block_cnt; |
| } else if (block_cnt == 1) { |
| /* last single sgl with non-contiguous xri */ |
| if (sgl_size > SGL_PAGE_SIZE) |
| pdma_phys_sgl1 = |
| lpfc_ncmd->dma_phys_sgl + |
| SGL_PAGE_SIZE; |
| else |
| pdma_phys_sgl1 = 0; |
| cur_xritag = lpfc_ncmd->cur_iocbq.sli4_xritag; |
| status = lpfc_sli4_post_sgl(phba, |
| lpfc_ncmd->dma_phys_sgl, |
| pdma_phys_sgl1, cur_xritag); |
| if (status) { |
| /* failure, put on abort nvme list */ |
| lpfc_ncmd->flags |= LPFC_SBUF_XBUSY; |
| } else { |
| /* success, put on NVME buffer list */ |
| lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY; |
| lpfc_ncmd->status = IOSTAT_SUCCESS; |
| num_posted++; |
| } |
| /* success, put on NVME buffer sgl list */ |
| list_add_tail(&lpfc_ncmd->list, &nvme_nblist); |
| } |
| } |
| |
| /* continue until a nembed page worth of sgls */ |
| if (post_cnt == 0) |
| continue; |
| |
| /* post block of NVME buffer list sgls */ |
| status = lpfc_sli4_post_nvme_sgl_block(phba, &blck_nblist, |
| post_cnt); |
| |
| /* don't reset xirtag due to hole in xri block */ |
| if (block_cnt == 0) |
| last_xritag = NO_XRI; |
| |
| /* reset NVME buffer post count for next round of posting */ |
| post_cnt = 0; |
| |
| /* put posted NVME buffer-sgl posted on NVME buffer sgl list */ |
| while (!list_empty(&blck_nblist)) { |
| list_remove_head(&blck_nblist, lpfc_ncmd, |
| struct lpfc_nvme_buf, list); |
| if (status) { |
| /* failure, put on abort nvme list */ |
| lpfc_ncmd->flags |= LPFC_SBUF_XBUSY; |
| } else { |
| /* success, put on NVME buffer list */ |
| lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY; |
| lpfc_ncmd->status = IOSTAT_SUCCESS; |
| num_posted++; |
| } |
| list_add_tail(&lpfc_ncmd->list, &nvme_nblist); |
| } |
| } |
| /* Push NVME buffers with sgl posted to the available list */ |
| while (!list_empty(&nvme_nblist)) { |
| list_remove_head(&nvme_nblist, lpfc_ncmd, |
| struct lpfc_nvme_buf, list); |
| lpfc_release_nvme_buf(phba, lpfc_ncmd); |
| } |
| return num_posted; |
| } |
| |
| /** |
| * lpfc_repost_nvme_sgl_list - Repost all the allocated nvme buffer sgls |
| * @phba: pointer to lpfc hba data structure. |
| * |
| * This routine walks the list of nvme buffers that have been allocated and |
| * repost them to the port by using SGL block post. This is needed after a |
| * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine |
| * is responsible for moving all nvme buffers on the lpfc_abts_nvme_sgl_list |
| * to the lpfc_nvme_buf_list. If the repost fails, reject all nvme buffers. |
| * |
| * Returns: 0 = success, non-zero failure. |
| **/ |
| int |
| lpfc_repost_nvme_sgl_list(struct lpfc_hba *phba) |
| { |
| LIST_HEAD(post_nblist); |
| int num_posted, rc = 0; |
| |
| /* get all NVME buffers need to repost to a local list */ |
| spin_lock_irq(&phba->nvme_buf_list_get_lock); |
| spin_lock(&phba->nvme_buf_list_put_lock); |
| list_splice_init(&phba->lpfc_nvme_buf_list_get, &post_nblist); |
| list_splice(&phba->lpfc_nvme_buf_list_put, &post_nblist); |
| phba->get_nvme_bufs = 0; |
| phba->put_nvme_bufs = 0; |
| spin_unlock(&phba->nvme_buf_list_put_lock); |
| spin_unlock_irq(&phba->nvme_buf_list_get_lock); |
| |
| /* post the list of nvme buffer sgls to port if available */ |
| if (!list_empty(&post_nblist)) { |
| num_posted = lpfc_post_nvme_sgl_list(phba, &post_nblist, |
| phba->sli4_hba.nvme_xri_cnt); |
| /* failed to post any nvme buffer, return error */ |
| if (num_posted == 0) |
| rc = -EIO; |
| } |
| return rc; |
| } |
| |
| /** |
| * lpfc_new_nvme_buf - Scsi buffer allocator for HBA with SLI4 IF spec |
| * @vport: The virtual port for which this call being executed. |
| * @num_to_allocate: The requested number of buffers to allocate. |
| * |
| * This routine allocates nvme buffers for device with SLI-4 interface spec, |
| * the nvme buffer contains all the necessary information needed to initiate |
| * a NVME I/O. After allocating up to @num_to_allocate NVME buffers and put |
| * them on a list, it post them to the port by using SGL block post. |
| * |
| * Return codes: |
| * int - number of nvme buffers that were allocated and posted. |
| * 0 = failure, less than num_to_alloc is a partial failure. |
| **/ |
| static int |
| lpfc_new_nvme_buf(struct lpfc_vport *vport, int num_to_alloc) |
| { |
| struct lpfc_hba *phba = vport->phba; |
| struct lpfc_nvme_buf *lpfc_ncmd; |
| struct lpfc_iocbq *pwqeq; |
| union lpfc_wqe128 *wqe; |
| struct sli4_sge *sgl; |
| dma_addr_t pdma_phys_sgl; |
| uint16_t iotag, lxri = 0; |
| int bcnt, num_posted, sgl_size; |
| LIST_HEAD(prep_nblist); |
| LIST_HEAD(post_nblist); |
| LIST_HEAD(nvme_nblist); |
| |
| sgl_size = phba->cfg_sg_dma_buf_size; |
| |
| for (bcnt = 0; bcnt < num_to_alloc; bcnt++) { |
| lpfc_ncmd = kzalloc(sizeof(struct lpfc_nvme_buf), GFP_KERNEL); |
| if (!lpfc_ncmd) |
| break; |
| /* |
| * Get memory from the pci pool to map the virt space to |
| * pci bus space for an I/O. The DMA buffer includes the |
| * number of SGE's necessary to support the sg_tablesize. |
| */ |
| lpfc_ncmd->data = dma_pool_zalloc(phba->lpfc_sg_dma_buf_pool, |
| GFP_KERNEL, |
| &lpfc_ncmd->dma_handle); |
| if (!lpfc_ncmd->data) { |
| kfree(lpfc_ncmd); |
| break; |
| } |
| |
| lxri = lpfc_sli4_next_xritag(phba); |
| if (lxri == NO_XRI) { |
| dma_pool_free(phba->lpfc_sg_dma_buf_pool, |
| lpfc_ncmd->data, lpfc_ncmd->dma_handle); |
| kfree(lpfc_ncmd); |
| break; |
| } |
| pwqeq = &(lpfc_ncmd->cur_iocbq); |
| wqe = &pwqeq->wqe; |
| |
| /* Allocate iotag for lpfc_ncmd->cur_iocbq. */ |
| iotag = lpfc_sli_next_iotag(phba, pwqeq); |
| if (iotag == 0) { |
| dma_pool_free(phba->lpfc_sg_dma_buf_pool, |
| lpfc_ncmd->data, lpfc_ncmd->dma_handle); |
| kfree(lpfc_ncmd); |
| lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR, |
| "6121 Failed to allocated IOTAG for" |
| " XRI:0x%x\n", lxri); |
| lpfc_sli4_free_xri(phba, lxri); |
| break; |
| } |
| pwqeq->sli4_lxritag = lxri; |
| pwqeq->sli4_xritag = phba->sli4_hba.xri_ids[lxri]; |
| pwqeq->iocb_flag |= LPFC_IO_NVME; |
| pwqeq->context1 = lpfc_ncmd; |
| pwqeq->wqe_cmpl = lpfc_nvme_io_cmd_wqe_cmpl; |
| |
| /* Initialize local short-hand pointers. */ |
| lpfc_ncmd->nvme_sgl = lpfc_ncmd->data; |
| sgl = lpfc_ncmd->nvme_sgl; |
| pdma_phys_sgl = lpfc_ncmd->dma_handle; |
| lpfc_ncmd->dma_phys_sgl = pdma_phys_sgl; |
| |
| /* Rsp SGE will be filled in when we rcv an IO |
| * from the NVME Layer to be sent. |
| * The cmd is going to be embedded so we need a SKIP SGE. |
| */ |
| bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_SKIP); |
| bf_set(lpfc_sli4_sge_last, sgl, 0); |
| sgl->word2 = cpu_to_le32(sgl->word2); |
| /* Fill in word 3 / sgl_len during cmd submission */ |
| |
| lpfc_ncmd->cur_iocbq.context1 = lpfc_ncmd; |
| |
| /* Initialize WQE */ |
| memset(wqe, 0, sizeof(union lpfc_wqe)); |
| |
| /* add the nvme buffer to a post list */ |
| list_add_tail(&lpfc_ncmd->list, &post_nblist); |
| spin_lock_irq(&phba->nvme_buf_list_get_lock); |
| phba->sli4_hba.nvme_xri_cnt++; |
| spin_unlock_irq(&phba->nvme_buf_list_get_lock); |
| } |
| lpfc_printf_log(phba, KERN_INFO, LOG_NVME, |
| "6114 Allocate %d out of %d requested new NVME " |
| "buffers\n", bcnt, num_to_alloc); |
| |
| /* post the list of nvme buffer sgls to port if available */ |
| if (!list_empty(&post_nblist)) |
| num_posted = lpfc_post_nvme_sgl_list(phba, |
| &post_nblist, bcnt); |
| else |
| num_posted = 0; |
| |
| return num_posted; |
| } |
| |
| static inline struct lpfc_nvme_buf * |
| lpfc_nvme_buf(struct lpfc_hba *phba) |
| { |
| struct lpfc_nvme_buf *lpfc_ncmd, *lpfc_ncmd_next; |
| |
| list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next, |
| &phba->lpfc_nvme_buf_list_get, list) { |
| list_del_init(&lpfc_ncmd->list); |
| phba->get_nvme_bufs--; |
| return lpfc_ncmd; |
| } |
| return NULL; |
| } |
| |
| /** |
| * lpfc_get_nvme_buf - Get a nvme buffer from lpfc_nvme_buf_list of the HBA |
| * @phba: The HBA for which this call is being executed. |
| * |
| * This routine removes a nvme buffer from head of @phba lpfc_nvme_buf_list list |
| * and returns to caller. |
| * |
| * Return codes: |
| * NULL - Error |
| * Pointer to lpfc_nvme_buf - Success |
| **/ |
| static struct lpfc_nvme_buf * |
| lpfc_get_nvme_buf(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp, |
| int expedite) |
| { |
| struct lpfc_nvme_buf *lpfc_ncmd = NULL; |
| unsigned long iflag = 0; |
| |
| spin_lock_irqsave(&phba->nvme_buf_list_get_lock, iflag); |
| if (phba->get_nvme_bufs > LPFC_NVME_EXPEDITE_XRICNT || expedite) |
| lpfc_ncmd = lpfc_nvme_buf(phba); |
| if (!lpfc_ncmd) { |
| spin_lock(&phba->nvme_buf_list_put_lock); |
| list_splice(&phba->lpfc_nvme_buf_list_put, |
| &phba->lpfc_nvme_buf_list_get); |
| phba->get_nvme_bufs += phba->put_nvme_bufs; |
| INIT_LIST_HEAD(&phba->lpfc_nvme_buf_list_put); |
| phba->put_nvme_bufs = 0; |
| spin_unlock(&phba->nvme_buf_list_put_lock); |
| if (phba->get_nvme_bufs > LPFC_NVME_EXPEDITE_XRICNT || expedite) |
| lpfc_ncmd = lpfc_nvme_buf(phba); |
| } |
| spin_unlock_irqrestore(&phba->nvme_buf_list_get_lock, iflag); |
| |
| if (lpfc_ndlp_check_qdepth(phba, ndlp) && lpfc_ncmd) { |
| atomic_inc(&ndlp->cmd_pending); |
| lpfc_ncmd->flags |= LPFC_BUMP_QDEPTH; |
| } |
| return lpfc_ncmd; |
| } |
| |
| /** |
| * lpfc_release_nvme_buf: Return a nvme buffer back to hba nvme buf list. |
| * @phba: The Hba for which this call is being executed. |
| * @lpfc_ncmd: The nvme buffer which is being released. |
| * |
| * This routine releases @lpfc_ncmd nvme buffer by adding it to tail of @phba |
| * lpfc_nvme_buf_list list. For SLI4 XRI's are tied to the nvme buffer |
| * and cannot be reused for at least RA_TOV amount of time if it was |
| * aborted. |
| **/ |
| static void |
| lpfc_release_nvme_buf(struct lpfc_hba *phba, struct lpfc_nvme_buf *lpfc_ncmd) |
| { |
| unsigned long iflag = 0; |
| |
| if ((lpfc_ncmd->flags & LPFC_BUMP_QDEPTH) && lpfc_ncmd->ndlp) |
| atomic_dec(&lpfc_ncmd->ndlp->cmd_pending); |
| |
| lpfc_ncmd->nonsg_phys = 0; |
| lpfc_ncmd->ndlp = NULL; |
| lpfc_ncmd->flags &= ~LPFC_BUMP_QDEPTH; |
| |
| if (lpfc_ncmd->flags & LPFC_SBUF_XBUSY) { |
| lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS, |
| "6310 XB release deferred for " |
| "ox_id x%x on reqtag x%x\n", |
| lpfc_ncmd->cur_iocbq.sli4_xritag, |
| lpfc_ncmd->cur_iocbq.iotag); |
| |
| spin_lock_irqsave(&phba->sli4_hba.abts_nvme_buf_list_lock, |
| iflag); |
| list_add_tail(&lpfc_ncmd->list, |
| &phba->sli4_hba.lpfc_abts_nvme_buf_list); |
| spin_unlock_irqrestore(&phba->sli4_hba.abts_nvme_buf_list_lock, |
| iflag); |
| } else { |
| lpfc_ncmd->nvmeCmd = NULL; |
| lpfc_ncmd->cur_iocbq.iocb_flag = LPFC_IO_NVME; |
| spin_lock_irqsave(&phba->nvme_buf_list_put_lock, iflag); |
| list_add_tail(&lpfc_ncmd->list, &phba->lpfc_nvme_buf_list_put); |
| phba->put_nvme_bufs++; |
| spin_unlock_irqrestore(&phba->nvme_buf_list_put_lock, iflag); |
| } |
| } |
| |
| /** |
| * lpfc_nvme_create_localport - Create/Bind an nvme localport instance. |
| * @pvport - the lpfc_vport instance requesting a localport. |
| * |
| * This routine is invoked to create an nvme localport instance to bind |
| * to the nvme_fc_transport. It is called once during driver load |
| * like lpfc_create_shost after all other services are initialized. |
| * It requires a vport, vpi, and wwns at call time. Other localport |
| * parameters are modified as the driver's FCID and the Fabric WWN |
| * are established. |
| * |
| * Return codes |
| * 0 - successful |
| * -ENOMEM - no heap memory available |
| * other values - from nvme registration upcall |
| **/ |
| int |
| lpfc_nvme_create_localport(struct lpfc_vport *vport) |
| { |
| int ret = 0; |
| struct lpfc_hba *phba = vport->phba; |
| struct nvme_fc_port_info nfcp_info; |
| struct nvme_fc_local_port *localport; |
| struct lpfc_nvme_lport *lport; |
| struct lpfc_nvme_ctrl_stat *cstat; |
| int len, i; |
| |
| /* Initialize this localport instance. The vport wwn usage ensures |
| * that NPIV is accounted for. |
| */ |
| memset(&nfcp_info, 0, sizeof(struct nvme_fc_port_info)); |
| nfcp_info.port_role = FC_PORT_ROLE_NVME_INITIATOR; |
| nfcp_info.node_name = wwn_to_u64(vport->fc_nodename.u.wwn); |
| nfcp_info.port_name = wwn_to_u64(vport->fc_portname.u.wwn); |
| |
| /* Limit to LPFC_MAX_NVME_SEG_CNT. |
| * For now need + 1 to get around NVME transport logic. |
| */ |
| if (phba->cfg_sg_seg_cnt > LPFC_MAX_NVME_SEG_CNT) { |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME | LOG_INIT, |
| "6300 Reducing sg segment cnt to %d\n", |
| LPFC_MAX_NVME_SEG_CNT); |
| phba->cfg_nvme_seg_cnt = LPFC_MAX_NVME_SEG_CNT; |
| } else { |
| phba->cfg_nvme_seg_cnt = phba->cfg_sg_seg_cnt; |
| } |
| lpfc_nvme_template.max_sgl_segments = phba->cfg_nvme_seg_cnt + 1; |
| lpfc_nvme_template.max_hw_queues = phba->cfg_nvme_io_channel; |
| |
| cstat = kmalloc((sizeof(struct lpfc_nvme_ctrl_stat) * |
| phba->cfg_nvme_io_channel), GFP_KERNEL); |
| if (!cstat) |
| return -ENOMEM; |
| |
| /* localport is allocated from the stack, but the registration |
| * call allocates heap memory as well as the private area. |
| */ |
| #if (IS_ENABLED(CONFIG_NVME_FC)) |
| ret = nvme_fc_register_localport(&nfcp_info, &lpfc_nvme_template, |
| &vport->phba->pcidev->dev, &localport); |
| #else |
| ret = -ENOMEM; |
| #endif |
| if (!ret) { |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME | LOG_NVME_DISC, |
| "6005 Successfully registered local " |
| "NVME port num %d, localP %p, private %p, " |
| "sg_seg %d\n", |
| localport->port_num, localport, |
| localport->private, |
| lpfc_nvme_template.max_sgl_segments); |
| |
| /* Private is our lport size declared in the template. */ |
| lport = (struct lpfc_nvme_lport *)localport->private; |
| vport->localport = localport; |
| lport->vport = vport; |
| lport->cstat = cstat; |
| vport->nvmei_support = 1; |
| |
| atomic_set(&lport->xmt_fcp_noxri, 0); |
| atomic_set(&lport->xmt_fcp_bad_ndlp, 0); |
| atomic_set(&lport->xmt_fcp_qdepth, 0); |
| atomic_set(&lport->xmt_fcp_err, 0); |
| atomic_set(&lport->xmt_fcp_wqerr, 0); |
| atomic_set(&lport->xmt_fcp_abort, 0); |
| atomic_set(&lport->xmt_ls_abort, 0); |
| atomic_set(&lport->xmt_ls_err, 0); |
| atomic_set(&lport->cmpl_fcp_xb, 0); |
| atomic_set(&lport->cmpl_fcp_err, 0); |
| atomic_set(&lport->cmpl_ls_xb, 0); |
| atomic_set(&lport->cmpl_ls_err, 0); |
| atomic_set(&lport->fc4NvmeLsRequests, 0); |
| atomic_set(&lport->fc4NvmeLsCmpls, 0); |
| |
| for (i = 0; i < phba->cfg_nvme_io_channel; i++) { |
| cstat = &lport->cstat[i]; |
| atomic_set(&cstat->fc4NvmeInputRequests, 0); |
| atomic_set(&cstat->fc4NvmeOutputRequests, 0); |
| atomic_set(&cstat->fc4NvmeControlRequests, 0); |
| atomic_set(&cstat->fc4NvmeIoCmpls, 0); |
| } |
| |
| /* Don't post more new bufs if repost already recovered |
| * the nvme sgls. |
| */ |
| if (phba->sli4_hba.nvme_xri_cnt == 0) { |
| len = lpfc_new_nvme_buf(vport, |
| phba->sli4_hba.nvme_xri_max); |
| vport->phba->total_nvme_bufs += len; |
| } |
| } else { |
| kfree(cstat); |
| } |
| |
| return ret; |
| } |
| |
| /* lpfc_nvme_lport_unreg_wait - Wait for the host to complete an lport unreg. |
| * |
| * The driver has to wait for the host nvme transport to callback |
| * indicating the localport has successfully unregistered all |
| * resources. Since this is an uninterruptible wait, loop every ten |
| * seconds and print a message indicating no progress. |
| * |
| * An uninterruptible wait is used because of the risk of transport-to- |
| * driver state mismatch. |
| */ |
| void |
| lpfc_nvme_lport_unreg_wait(struct lpfc_vport *vport, |
| struct lpfc_nvme_lport *lport, |
| struct completion *lport_unreg_cmp) |
| { |
| #if (IS_ENABLED(CONFIG_NVME_FC)) |
| u32 wait_tmo; |
| int ret; |
| |
| /* Host transport has to clean up and confirm requiring an indefinite |
| * wait. Print a message if a 10 second wait expires and renew the |
| * wait. This is unexpected. |
| */ |
| wait_tmo = msecs_to_jiffies(LPFC_NVME_WAIT_TMO * 1000); |
| while (true) { |
| ret = wait_for_completion_timeout(lport_unreg_cmp, wait_tmo); |
| if (unlikely(!ret)) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR, |
| "6176 Lport %p Localport %p wait " |
| "timed out. Renewing.\n", |
| lport, vport->localport); |
| continue; |
| } |
| break; |
| } |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR, |
| "6177 Lport %p Localport %p Complete Success\n", |
| lport, vport->localport); |
| #endif |
| } |
| |
| /** |
| * lpfc_nvme_destroy_localport - Destroy lpfc_nvme bound to nvme transport. |
| * @pnvme: pointer to lpfc nvme data structure. |
| * |
| * This routine is invoked to destroy all lports bound to the phba. |
| * The lport memory was allocated by the nvme fc transport and is |
| * released there. This routine ensures all rports bound to the |
| * lport have been disconnected. |
| * |
| **/ |
| void |
| lpfc_nvme_destroy_localport(struct lpfc_vport *vport) |
| { |
| #if (IS_ENABLED(CONFIG_NVME_FC)) |
| struct nvme_fc_local_port *localport; |
| struct lpfc_nvme_lport *lport; |
| struct lpfc_nvme_ctrl_stat *cstat; |
| int ret; |
| DECLARE_COMPLETION_ONSTACK(lport_unreg_cmp); |
| |
| if (vport->nvmei_support == 0) |
| return; |
| |
| localport = vport->localport; |
| lport = (struct lpfc_nvme_lport *)localport->private; |
| cstat = lport->cstat; |
| |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME, |
| "6011 Destroying NVME localport %p\n", |
| localport); |
| |
| /* lport's rport list is clear. Unregister |
| * lport and release resources. |
| */ |
| lport->lport_unreg_cmp = &lport_unreg_cmp; |
| ret = nvme_fc_unregister_localport(localport); |
| |
| /* Wait for completion. This either blocks |
| * indefinitely or succeeds |
| */ |
| lpfc_nvme_lport_unreg_wait(vport, lport, &lport_unreg_cmp); |
| vport->localport = NULL; |
| kfree(cstat); |
| |
| /* Regardless of the unregister upcall response, clear |
| * nvmei_support. All rports are unregistered and the |
| * driver will clean up. |
| */ |
| vport->nvmei_support = 0; |
| if (ret == 0) { |
| lpfc_printf_vlog(vport, |
| KERN_INFO, LOG_NVME_DISC, |
| "6009 Unregistered lport Success\n"); |
| } else { |
| lpfc_printf_vlog(vport, |
| KERN_INFO, LOG_NVME_DISC, |
| "6010 Unregistered lport " |
| "Failed, status x%x\n", |
| ret); |
| } |
| #endif |
| } |
| |
| void |
| lpfc_nvme_update_localport(struct lpfc_vport *vport) |
| { |
| #if (IS_ENABLED(CONFIG_NVME_FC)) |
| struct nvme_fc_local_port *localport; |
| struct lpfc_nvme_lport *lport; |
| |
| localport = vport->localport; |
| if (!localport) { |
| lpfc_printf_vlog(vport, KERN_WARNING, LOG_NVME, |
| "6710 Update NVME fail. No localport\n"); |
| return; |
| } |
| lport = (struct lpfc_nvme_lport *)localport->private; |
| if (!lport) { |
| lpfc_printf_vlog(vport, KERN_WARNING, LOG_NVME, |
| "6171 Update NVME fail. localP %p, No lport\n", |
| localport); |
| return; |
| } |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME, |
| "6012 Update NVME lport %p did x%x\n", |
| localport, vport->fc_myDID); |
| |
| localport->port_id = vport->fc_myDID; |
| if (localport->port_id == 0) |
| localport->port_role = FC_PORT_ROLE_NVME_DISCOVERY; |
| else |
| localport->port_role = FC_PORT_ROLE_NVME_INITIATOR; |
| |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC, |
| "6030 bound lport %p to DID x%06x\n", |
| lport, localport->port_id); |
| #endif |
| } |
| |
| int |
| lpfc_nvme_register_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) |
| { |
| #if (IS_ENABLED(CONFIG_NVME_FC)) |
| int ret = 0; |
| struct nvme_fc_local_port *localport; |
| struct lpfc_nvme_lport *lport; |
| struct lpfc_nvme_rport *rport; |
| struct lpfc_nvme_rport *oldrport; |
| struct nvme_fc_remote_port *remote_port; |
| struct nvme_fc_port_info rpinfo; |
| struct lpfc_nodelist *prev_ndlp = NULL; |
| |
| lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NVME_DISC, |
| "6006 Register NVME PORT. DID x%06x nlptype x%x\n", |
| ndlp->nlp_DID, ndlp->nlp_type); |
| |
| localport = vport->localport; |
| if (!localport) |
| return 0; |
| |
| lport = (struct lpfc_nvme_lport *)localport->private; |
| |
| /* NVME rports are not preserved across devloss. |
| * Just register this instance. Note, rpinfo->dev_loss_tmo |
| * is left 0 to indicate accept transport defaults. The |
| * driver communicates port role capabilities consistent |
| * with the PRLI response data. |
| */ |
| memset(&rpinfo, 0, sizeof(struct nvme_fc_port_info)); |
| rpinfo.port_id = ndlp->nlp_DID; |
| if (ndlp->nlp_type & NLP_NVME_TARGET) |
| rpinfo.port_role |= FC_PORT_ROLE_NVME_TARGET; |
| if (ndlp->nlp_type & NLP_NVME_INITIATOR) |
| rpinfo.port_role |= FC_PORT_ROLE_NVME_INITIATOR; |
| |
| if (ndlp->nlp_type & NLP_NVME_DISCOVERY) |
| rpinfo.port_role |= FC_PORT_ROLE_NVME_DISCOVERY; |
| |
| rpinfo.port_name = wwn_to_u64(ndlp->nlp_portname.u.wwn); |
| rpinfo.node_name = wwn_to_u64(ndlp->nlp_nodename.u.wwn); |
| |
| spin_lock_irq(&vport->phba->hbalock); |
| oldrport = lpfc_ndlp_get_nrport(ndlp); |
| spin_unlock_irq(&vport->phba->hbalock); |
| if (!oldrport) |
| lpfc_nlp_get(ndlp); |
| |
| ret = nvme_fc_register_remoteport(localport, &rpinfo, &remote_port); |
| if (!ret) { |
| /* If the ndlp already has an nrport, this is just |
| * a resume of the existing rport. Else this is a |
| * new rport. |
| */ |
| /* Guard against an unregister/reregister |
| * race that leaves the WAIT flag set. |
| */ |
| spin_lock_irq(&vport->phba->hbalock); |
| ndlp->upcall_flags &= ~NLP_WAIT_FOR_UNREG; |
| spin_unlock_irq(&vport->phba->hbalock); |
| rport = remote_port->private; |
| if (oldrport) { |
| /* New remoteport record does not guarantee valid |
| * host private memory area. |
| */ |
| prev_ndlp = oldrport->ndlp; |
| if (oldrport == remote_port->private) { |
| /* Same remoteport - ndlp should match. |
| * Just reuse. |
| */ |
| lpfc_printf_vlog(ndlp->vport, KERN_INFO, |
| LOG_NVME_DISC, |
| "6014 Rebinding lport to " |
| "remoteport %p wwpn 0x%llx, " |
| "Data: x%x x%x %p %p x%x x%06x\n", |
| remote_port, |
| remote_port->port_name, |
| remote_port->port_id, |
| remote_port->port_role, |
| prev_ndlp, |
| ndlp, |
| ndlp->nlp_type, |
| ndlp->nlp_DID); |
| return 0; |
| } |
| |
| /* Sever the ndlp<->rport association |
| * before dropping the ndlp ref from |
| * register. |
| */ |
| spin_lock_irq(&vport->phba->hbalock); |
| ndlp->nrport = NULL; |
| ndlp->upcall_flags &= ~NLP_WAIT_FOR_UNREG; |
| spin_unlock_irq(&vport->phba->hbalock); |
| rport->ndlp = NULL; |
| rport->remoteport = NULL; |
| |
| /* Reference only removed if previous NDLP is no longer |
| * active. It might be just a swap and removing the |
| * reference would cause a premature cleanup. |
| */ |
| if (prev_ndlp && prev_ndlp != ndlp) { |
| if ((!NLP_CHK_NODE_ACT(prev_ndlp)) || |
| (!prev_ndlp->nrport)) |
| lpfc_nlp_put(prev_ndlp); |
| } |
| } |
| |
| /* Clean bind the rport to the ndlp. */ |
| rport->remoteport = remote_port; |
| rport->lport = lport; |
| rport->ndlp = ndlp; |
| spin_lock_irq(&vport->phba->hbalock); |
| ndlp->nrport = rport; |
| spin_unlock_irq(&vport->phba->hbalock); |
| lpfc_printf_vlog(vport, KERN_INFO, |
| LOG_NVME_DISC | LOG_NODE, |
| "6022 Binding new rport to " |
| "lport %p Remoteport %p rport %p WWNN 0x%llx, " |
| "Rport WWPN 0x%llx DID " |
| "x%06x Role x%x, ndlp %p prev_ndlp %p\n", |
| lport, remote_port, rport, |
| rpinfo.node_name, rpinfo.port_name, |
| rpinfo.port_id, rpinfo.port_role, |
| ndlp, prev_ndlp); |
| } else { |
| lpfc_printf_vlog(vport, KERN_ERR, |
| LOG_NVME_DISC | LOG_NODE, |
| "6031 RemotePort Registration failed " |
| "err: %d, DID x%06x\n", |
| ret, ndlp->nlp_DID); |
| } |
| |
| return ret; |
| #else |
| return 0; |
| #endif |
| } |
| |
| /* lpfc_nvme_unregister_port - unbind the DID and port_role from this rport. |
| * |
| * There is no notion of Devloss or rport recovery from the current |
| * nvme_transport perspective. Loss of an rport just means IO cannot |
| * be sent and recovery is completely up to the initator. |
| * For now, the driver just unbinds the DID and port_role so that |
| * no further IO can be issued. Changes are planned for later. |
| * |
| * Notes - the ndlp reference count is not decremented here since |
| * since there is no nvme_transport api for devloss. Node ref count |
| * is only adjusted in driver unload. |
| */ |
| void |
| lpfc_nvme_unregister_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) |
| { |
| #if (IS_ENABLED(CONFIG_NVME_FC)) |
| int ret; |
| struct nvme_fc_local_port *localport; |
| struct lpfc_nvme_lport *lport; |
| struct lpfc_nvme_rport *rport; |
| struct nvme_fc_remote_port *remoteport = NULL; |
| |
| localport = vport->localport; |
| |
| /* This is fundamental error. The localport is always |
| * available until driver unload. Just exit. |
| */ |
| if (!localport) |
| return; |
| |
| lport = (struct lpfc_nvme_lport *)localport->private; |
| if (!lport) |
| goto input_err; |
| |
| spin_lock_irq(&vport->phba->hbalock); |
| rport = lpfc_ndlp_get_nrport(ndlp); |
| if (rport) |
| remoteport = rport->remoteport; |
| spin_unlock_irq(&vport->phba->hbalock); |
| if (!remoteport) |
| goto input_err; |
| |
| lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC, |
| "6033 Unreg nvme remoteport %p, portname x%llx, " |
| "port_id x%06x, portstate x%x port type x%x\n", |
| remoteport, remoteport->port_name, |
| remoteport->port_id, remoteport->port_state, |
| ndlp->nlp_type); |
| |
| /* Sanity check ndlp type. Only call for NVME ports. Don't |
| * clear any rport state until the transport calls back. |
| */ |
| |
| if (ndlp->nlp_type & NLP_NVME_TARGET) { |
| /* No concern about the role change on the nvme remoteport. |
| * The transport will update it. |
| */ |
| ndlp->upcall_flags |= NLP_WAIT_FOR_UNREG; |
| |
| /* Don't let the host nvme transport keep sending keep-alives |
| * on this remoteport. Vport is unloading, no recovery. The |
| * return values is ignored. The upcall is a courtesy to the |
| * transport. |
| */ |
| if (vport->load_flag & FC_UNLOADING) |
| (void)nvme_fc_set_remoteport_devloss(remoteport, 0); |
| |
| ret = nvme_fc_unregister_remoteport(remoteport); |
| if (ret != 0) { |
| lpfc_nlp_put(ndlp); |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC, |
| "6167 NVME unregister failed %d " |
| "port_state x%x\n", |
| ret, remoteport->port_state); |
| } |
| } |
| return; |
| |
| input_err: |
| #endif |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC, |
| "6168 State error: lport %p, rport%p FCID x%06x\n", |
| vport->localport, ndlp->rport, ndlp->nlp_DID); |
| } |
| |
| /** |
| * lpfc_sli4_nvme_xri_aborted - Fast-path process of NVME xri abort |
| * @phba: pointer to lpfc hba data structure. |
| * @axri: pointer to the fcp xri abort wcqe structure. |
| * |
| * This routine is invoked by the worker thread to process a SLI4 fast-path |
| * NVME aborted xri. Aborted NVME IO commands are completed to the transport |
| * here. |
| **/ |
| void |
| lpfc_sli4_nvme_xri_aborted(struct lpfc_hba *phba, |
| struct sli4_wcqe_xri_aborted *axri) |
| { |
| uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri); |
| struct lpfc_nvme_buf *lpfc_ncmd, *next_lpfc_ncmd; |
| struct nvmefc_fcp_req *nvme_cmd = NULL; |
| struct lpfc_nodelist *ndlp; |
| unsigned long iflag = 0; |
| |
| if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)) |
| return; |
| spin_lock_irqsave(&phba->hbalock, iflag); |
| spin_lock(&phba->sli4_hba.abts_nvme_buf_list_lock); |
| list_for_each_entry_safe(lpfc_ncmd, next_lpfc_ncmd, |
| &phba->sli4_hba.lpfc_abts_nvme_buf_list, |
| list) { |
| if (lpfc_ncmd->cur_iocbq.sli4_xritag == xri) { |
| list_del_init(&lpfc_ncmd->list); |
| lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY; |
| lpfc_ncmd->status = IOSTAT_SUCCESS; |
| spin_unlock( |
| &phba->sli4_hba.abts_nvme_buf_list_lock); |
| |
| spin_unlock_irqrestore(&phba->hbalock, iflag); |
| ndlp = lpfc_ncmd->ndlp; |
| if (ndlp) |
| lpfc_sli4_abts_err_handler(phba, ndlp, axri); |
| |
| lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS, |
| "6311 nvme_cmd %p xri x%x tag x%x " |
| "abort complete and xri released\n", |
| lpfc_ncmd->nvmeCmd, xri, |
| lpfc_ncmd->cur_iocbq.iotag); |
| |
| /* Aborted NVME commands are required to not complete |
| * before the abort exchange command fully completes. |
| * Once completed, it is available via the put list. |
| */ |
| if (lpfc_ncmd->nvmeCmd) { |
| nvme_cmd = lpfc_ncmd->nvmeCmd; |
| nvme_cmd->done(nvme_cmd); |
| lpfc_ncmd->nvmeCmd = NULL; |
| } |
| lpfc_release_nvme_buf(phba, lpfc_ncmd); |
| return; |
| } |
| } |
| spin_unlock(&phba->sli4_hba.abts_nvme_buf_list_lock); |
| spin_unlock_irqrestore(&phba->hbalock, iflag); |
| |
| lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS, |
| "6312 XRI Aborted xri x%x not found\n", xri); |
| |
| } |
| |
| /** |
| * lpfc_nvme_wait_for_io_drain - Wait for all NVME wqes to complete |
| * @phba: Pointer to HBA context object. |
| * |
| * This function flushes all wqes in the nvme rings and frees all resources |
| * in the txcmplq. This function does not issue abort wqes for the IO |
| * commands in txcmplq, they will just be returned with |
| * IOERR_SLI_DOWN. This function is invoked with EEH when device's PCI |
| * slot has been permanently disabled. |
| **/ |
| void |
| lpfc_nvme_wait_for_io_drain(struct lpfc_hba *phba) |
| { |
| struct lpfc_sli_ring *pring; |
| u32 i, wait_cnt = 0; |
| |
| if (phba->sli_rev < LPFC_SLI_REV4 || !phba->sli4_hba.nvme_wq) |
| return; |
| |
| /* Cycle through all NVME rings and make sure all outstanding |
| * WQEs have been removed from the txcmplqs. |
| */ |
| for (i = 0; i < phba->cfg_nvme_io_channel; i++) { |
| pring = phba->sli4_hba.nvme_wq[i]->pring; |
| |
| if (!pring) |
| continue; |
| |
| /* Retrieve everything on the txcmplq */ |
| while (!list_empty(&pring->txcmplq)) { |
| msleep(LPFC_XRI_EXCH_BUSY_WAIT_T1); |
| wait_cnt++; |
| |
| /* The sleep is 10mS. Every ten seconds, |
| * dump a message. Something is wrong. |
| */ |
| if ((wait_cnt % 1000) == 0) { |
| lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR, |
| "6178 NVME IO not empty, " |
| "cnt %d\n", wait_cnt); |
| } |
| } |
| } |
| } |