ARM: dts: imx: use generic node name for fixed regulator
The device tree specification recommends that generic name should be
used for nodes. So instead of naming those fixed regulator nodes
arbitrarily, let's use the generic name 'regulator@num' for those nodes.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 4267c2b..41a9834 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -278,33 +278,39 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p3v: 3p3v {
+ reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- reg_vddio_sd0: vddio-sd0 {
+ reg_vddio_sd0: regulator@1 {
compatible = "regulator-fixed";
+ reg = <1>;
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 28 0>;
};
- reg_fec_3v3: fec-3v3 {
+ reg_fec_3v3: regulator@2 {
compatible = "regulator-fixed";
+ reg = <2>;
regulator-name = "fec-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 15 0>;
};
- reg_usb0_vbus: usb0_vbus {
+ reg_usb0_vbus: regulator@3 {
compatible = "regulator-fixed";
+ reg = <3>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -312,8 +318,9 @@
enable-active-high;
};
- reg_usb1_vbus: usb1_vbus {
+ reg_usb1_vbus: regulator@4 {
compatible = "regulator-fixed";
+ reg = <4>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -321,8 +328,9 @@
enable-active-high;
};
- reg_lcd_3v3: lcd-3v3 {
+ reg_lcd_3v3: regulator@5 {
compatible = "regulator-fixed";
+ reg = <5>;
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -330,8 +338,9 @@
enable-active-high;
};
- reg_can_3v3: can-3v3 {
+ reg_can_3v3: regulator@6 {
compatible = "regulator-fixed";
+ reg = <6>;
regulator-name = "can-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;