tty/serial: at91: BUG: disable interrupts when !UART_ENABLE_MS()
In set_termios(), interrupts where not disabled if UART_ENABLE_MS() was
false.
Tested on at91sam9g35.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Cc: stable <stable@vger.kernel.org> # >= 3.16
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 7b63677..d7d4584 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -527,6 +527,45 @@
}
/*
+ * Disable modem status interrupts
+ */
+static void atmel_disable_ms(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ uint32_t idr = 0;
+
+ /*
+ * Interrupt should not be disabled twice
+ */
+ if (!atmel_port->ms_irq_enabled)
+ return;
+
+ atmel_port->ms_irq_enabled = false;
+
+ if (atmel_port->gpio_irq[UART_GPIO_CTS] >= 0)
+ disable_irq(atmel_port->gpio_irq[UART_GPIO_CTS]);
+ else
+ idr |= ATMEL_US_CTSIC;
+
+ if (atmel_port->gpio_irq[UART_GPIO_DSR] >= 0)
+ disable_irq(atmel_port->gpio_irq[UART_GPIO_DSR]);
+ else
+ idr |= ATMEL_US_DSRIC;
+
+ if (atmel_port->gpio_irq[UART_GPIO_RI] >= 0)
+ disable_irq(atmel_port->gpio_irq[UART_GPIO_RI]);
+ else
+ idr |= ATMEL_US_RIIC;
+
+ if (atmel_port->gpio_irq[UART_GPIO_DCD] >= 0)
+ disable_irq(atmel_port->gpio_irq[UART_GPIO_DCD]);
+ else
+ idr |= ATMEL_US_DCDIC;
+
+ UART_PUT_IDR(port, idr);
+}
+
+/*
* Control the transmission of a break signal
*/
static void atmel_break_ctl(struct uart_port *port, int break_state)
@@ -1993,7 +2032,9 @@
/* CTS flow-control and modem-status interrupts */
if (UART_ENABLE_MS(port, termios->c_cflag))
- port->ops->enable_ms(port);
+ atmel_enable_ms(port);
+ else
+ atmel_disable_ms(port);
spin_unlock_irqrestore(&port->lock, flags);
}