| /* |
| * linux/drivers/video/backlight/pwm_bl.c |
| * |
| * simple PWM based backlight control, board code has to setup |
| * 1) pin configuration so PWM waveforms can output |
| * 2) platform_data being correctly configured |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/fb.h> |
| #include <linux/backlight.h> |
| #include <linux/err.h> |
| #include <linux/pwm.h> |
| #include <linux/pwm_backlight.h> |
| #include <linux/slab.h> |
| |
| struct pwm_bl_data { |
| struct pwm_device *pwm; |
| struct device *dev; |
| unsigned int period; |
| unsigned int lth_brightness; |
| int (*notify)(struct device *, |
| int brightness); |
| void (*notify_after)(struct device *, |
| int brightness); |
| int (*check_fb)(struct device *, struct fb_info *); |
| }; |
| |
| static int pwm_backlight_update_status(struct backlight_device *bl) |
| { |
| struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev); |
| int brightness = bl->props.brightness; |
| int max = bl->props.max_brightness; |
| |
| if (bl->props.power != FB_BLANK_UNBLANK) |
| brightness = 0; |
| |
| if (bl->props.fb_blank != FB_BLANK_UNBLANK) |
| brightness = 0; |
| |
| if (pb->notify) |
| brightness = pb->notify(pb->dev, brightness); |
| |
| if (brightness == 0) { |
| pwm_config(pb->pwm, 0, pb->period); |
| pwm_disable(pb->pwm); |
| } else { |
| brightness = pb->lth_brightness + |
| (brightness * (pb->period - pb->lth_brightness) / max); |
| pwm_config(pb->pwm, brightness, pb->period); |
| pwm_enable(pb->pwm); |
| } |
| |
| if (pb->notify_after) |
| pb->notify_after(pb->dev, brightness); |
| |
| return 0; |
| } |
| |
| static int pwm_backlight_get_brightness(struct backlight_device *bl) |
| { |
| return bl->props.brightness; |
| } |
| |
| static int pwm_backlight_check_fb(struct backlight_device *bl, |
| struct fb_info *info) |
| { |
| struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev); |
| |
| return !pb->check_fb || pb->check_fb(pb->dev, info); |
| } |
| |
| static const struct backlight_ops pwm_backlight_ops = { |
| .update_status = pwm_backlight_update_status, |
| .get_brightness = pwm_backlight_get_brightness, |
| .check_fb = pwm_backlight_check_fb, |
| }; |
| |
| static int pwm_backlight_probe(struct platform_device *pdev) |
| { |
| struct backlight_properties props; |
| struct platform_pwm_backlight_data *data = pdev->dev.platform_data; |
| struct backlight_device *bl; |
| struct pwm_bl_data *pb; |
| int ret; |
| |
| if (!data) { |
| dev_err(&pdev->dev, "failed to find platform data\n"); |
| return -EINVAL; |
| } |
| |
| if (data->init) { |
| ret = data->init(&pdev->dev); |
| if (ret < 0) |
| return ret; |
| } |
| |
| pb = devm_kzalloc(&pdev->dev, sizeof(*pb), GFP_KERNEL); |
| if (!pb) { |
| dev_err(&pdev->dev, "no memory for state\n"); |
| ret = -ENOMEM; |
| goto err_alloc; |
| } |
| |
| pb->period = data->pwm_period_ns; |
| pb->notify = data->notify; |
| pb->notify_after = data->notify_after; |
| pb->check_fb = data->check_fb; |
| pb->lth_brightness = data->lth_brightness * |
| (data->pwm_period_ns / data->max_brightness); |
| pb->dev = &pdev->dev; |
| |
| pb->pwm = pwm_request(data->pwm_id, "backlight"); |
| if (IS_ERR(pb->pwm)) { |
| dev_err(&pdev->dev, "unable to request PWM for backlight\n"); |
| ret = PTR_ERR(pb->pwm); |
| goto err_alloc; |
| } else |
| dev_dbg(&pdev->dev, "got pwm for backlight\n"); |
| |
| memset(&props, 0, sizeof(struct backlight_properties)); |
| props.type = BACKLIGHT_RAW; |
| props.max_brightness = data->max_brightness; |
| bl = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, pb, |
| &pwm_backlight_ops, &props); |
| if (IS_ERR(bl)) { |
| dev_err(&pdev->dev, "failed to register backlight\n"); |
| ret = PTR_ERR(bl); |
| goto err_bl; |
| } |
| |
| bl->props.brightness = data->dft_brightness; |
| backlight_update_status(bl); |
| |
| platform_set_drvdata(pdev, bl); |
| return 0; |
| |
| err_bl: |
| pwm_free(pb->pwm); |
| err_alloc: |
| if (data->exit) |
| data->exit(&pdev->dev); |
| return ret; |
| } |
| |
| static int pwm_backlight_remove(struct platform_device *pdev) |
| { |
| struct platform_pwm_backlight_data *data = pdev->dev.platform_data; |
| struct backlight_device *bl = platform_get_drvdata(pdev); |
| struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev); |
| |
| backlight_device_unregister(bl); |
| pwm_config(pb->pwm, 0, pb->period); |
| pwm_disable(pb->pwm); |
| pwm_free(pb->pwm); |
| if (data->exit) |
| data->exit(&pdev->dev); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int pwm_backlight_suspend(struct device *dev) |
| { |
| struct backlight_device *bl = dev_get_drvdata(dev); |
| struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev); |
| |
| if (pb->notify) |
| pb->notify(pb->dev, 0); |
| pwm_config(pb->pwm, 0, pb->period); |
| pwm_disable(pb->pwm); |
| if (pb->notify_after) |
| pb->notify_after(pb->dev, 0); |
| return 0; |
| } |
| |
| static int pwm_backlight_resume(struct device *dev) |
| { |
| struct backlight_device *bl = dev_get_drvdata(dev); |
| |
| backlight_update_status(bl); |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(pwm_backlight_pm_ops, pwm_backlight_suspend, |
| pwm_backlight_resume); |
| |
| #endif |
| |
| static struct platform_driver pwm_backlight_driver = { |
| .driver = { |
| .name = "pwm-backlight", |
| .owner = THIS_MODULE, |
| #ifdef CONFIG_PM |
| .pm = &pwm_backlight_pm_ops, |
| #endif |
| }, |
| .probe = pwm_backlight_probe, |
| .remove = pwm_backlight_remove, |
| }; |
| |
| module_platform_driver(pwm_backlight_driver); |
| |
| MODULE_DESCRIPTION("PWM based Backlight Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:pwm-backlight"); |
| |