V4L/DVB: saa7134: Fix IRQ2 bit names for the register map
There's an error at the IRQ2 bit map registers. Also, it doesn't
show what bits are needed for positive and for negative edge.
In the case of IR raw decoding, for some protocols, it is important
to detect both positive and negative edges. So, a latter patch
will need to use the other values.
Also, the code that detects problems on IRQ handling is incomplete,
as it disables only one of the IRQ bits for GPIO16 and GPIO18.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 68cda10..0612fff 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -471,7 +471,7 @@
"DONE_RA0", "DONE_RA1", "DONE_RA2", "DONE_RA3",
"AR", "PE", "PWR_ON", "RDCAP", "INTL", "FIDT", "MMC",
"TRIG_ERR", "CONF_ERR", "LOAD_ERR",
- "GPIO16?", "GPIO18", "GPIO22", "GPIO23"
+ "GPIO16", "GPIO18", "GPIO22", "GPIO23"
};
#define IRQBITS ARRAY_SIZE(irqbits)
@@ -601,12 +601,14 @@
/* disable gpio16 IRQ */
printk(KERN_WARNING "%s/irq: looping -- "
"clearing GPIO16 enable bit\n",dev->name);
- saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16);
+ saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16_P);
+ saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16_N);
} else if (report & SAA7134_IRQ_REPORT_GPIO18) {
/* disable gpio18 IRQs */
printk(KERN_WARNING "%s/irq: looping -- "
"clearing GPIO18 enable bit\n",dev->name);
- saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18);
+ saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
+ saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_N);
} else {
/* disable all irqs */
printk(KERN_WARNING "%s/irq: looping -- "
@@ -698,11 +700,11 @@
if (dev->has_remote == SAA7134_REMOTE_GPIO && dev->remote) {
if (dev->remote->mask_keydown & 0x10000)
- irq2_mask |= SAA7134_IRQ2_INTE_GPIO16;
+ irq2_mask |= SAA7134_IRQ2_INTE_GPIO16_N;
else if (dev->remote->mask_keydown & 0x40000)
- irq2_mask |= SAA7134_IRQ2_INTE_GPIO18;
+ irq2_mask |= SAA7134_IRQ2_INTE_GPIO18_P;
else if (dev->remote->mask_keyup & 0x40000)
- irq2_mask |= SAA7134_IRQ2_INTE_GPIO18A;
+ irq2_mask |= SAA7134_IRQ2_INTE_GPIO18_N;
}
if (dev->has_remote == SAA7134_REMOTE_I2C) {
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index f46dca3..a51ba83 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -1188,14 +1188,14 @@
/* Keep repeating the last key */
mod_timer(&ir->timer_keyup, jiffies + msecs_to_jiffies(150));
- saa_setl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18);
+ saa_setl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
}
static int saa7134_nec_irq(struct saa7134_dev *dev)
{
struct card_ir *ir = dev->remote;
- saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18);
+ saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
tasklet_schedule(&ir->tlet);
return 1;
diff --git a/drivers/media/video/saa7134/saa7134-reg.h b/drivers/media/video/saa7134/saa7134-reg.h
index cf89d96..e7e0af1 100644
--- a/drivers/media/video/saa7134/saa7134-reg.h
+++ b/drivers/media/video/saa7134/saa7134-reg.h
@@ -112,17 +112,17 @@
#define SAA7134_IRQ1_INTE_RA0_0 (1 << 0)
#define SAA7134_IRQ2 (0x2c8 >> 2)
-#define SAA7134_IRQ2_INTE_GPIO23A (1 << 17)
-#define SAA7134_IRQ2_INTE_GPIO23 (1 << 16)
-#define SAA7134_IRQ2_INTE_GPIO22A (1 << 15)
-#define SAA7134_IRQ2_INTE_GPIO22 (1 << 14)
-#define SAA7134_IRQ2_INTE_GPIO18A (1 << 13)
-#define SAA7134_IRQ2_INTE_GPIO18 (1 << 12)
-#define SAA7134_IRQ2_INTE_GPIO16 (1 << 11) /* not certain */
-#define SAA7134_IRQ2_INTE_SC2 (1 << 10)
-#define SAA7134_IRQ2_INTE_SC1 (1 << 9)
-#define SAA7134_IRQ2_INTE_SC0 (1 << 8)
-#define SAA7134_IRQ2_INTE_DEC5 (1 << 7)
+#define SAA7134_IRQ2_INTE_GPIO23_N (1 << 17) /* negative edge */
+#define SAA7134_IRQ2_INTE_GPIO23_P (1 << 16) /* positive edge */
+#define SAA7134_IRQ2_INTE_GPIO22_N (1 << 15) /* negative edge */
+#define SAA7134_IRQ2_INTE_GPIO22_P (1 << 14) /* positive edge */
+#define SAA7134_IRQ2_INTE_GPIO18_N (1 << 13) /* negative edge */
+#define SAA7134_IRQ2_INTE_GPIO18_P (1 << 12) /* positive edge */
+#define SAA7134_IRQ2_INTE_GPIO16_N (1 << 11) /* negative edge */
+#define SAA7134_IRQ2_INTE_GPIO16_P (1 << 10) /* positive edge */
+#define SAA7134_IRQ2_INTE_SC2 (1 << 9)
+#define SAA7134_IRQ2_INTE_SC1 (1 << 8)
+#define SAA7134_IRQ2_INTE_SC0 (1 << 7)
#define SAA7134_IRQ2_INTE_DEC4 (1 << 6)
#define SAA7134_IRQ2_INTE_DEC3 (1 << 5)
#define SAA7134_IRQ2_INTE_DEC2 (1 << 4)
@@ -135,7 +135,7 @@
#define SAA7134_IRQ_REPORT_GPIO23 (1 << 17)
#define SAA7134_IRQ_REPORT_GPIO22 (1 << 16)
#define SAA7134_IRQ_REPORT_GPIO18 (1 << 15)
-#define SAA7134_IRQ_REPORT_GPIO16 (1 << 14) /* not certain */
+#define SAA7134_IRQ_REPORT_GPIO16 (1 << 14)
#define SAA7134_IRQ_REPORT_LOAD_ERR (1 << 13)
#define SAA7134_IRQ_REPORT_CONF_ERR (1 << 12)
#define SAA7134_IRQ_REPORT_TRIG_ERR (1 << 11)