Merge branches 'doc', 'multitouch', 'upstream' and 'upstream-fixes' into for-linus
diff --git a/Documentation/usb/hiddev.txt b/Documentation/hid/hiddev.txt
similarity index 100%
rename from Documentation/usb/hiddev.txt
rename to Documentation/hid/hiddev.txt
diff --git a/Documentation/hid/hidraw.txt b/Documentation/hid/hidraw.txt
new file mode 100644
index 0000000..029e6cb
--- /dev/null
+++ b/Documentation/hid/hidraw.txt
@@ -0,0 +1,119 @@
+ HIDRAW - Raw Access to USB and Bluetooth Human Interface Devices
+ ==================================================================
+
+The hidraw driver provides a raw interface to USB and Bluetooth Human
+Interface Devices (HIDs). It differs from hiddev in that reports sent and
+received are not parsed by the HID parser, but are sent to and received from
+the device unmodified.
+
+Hidraw should be used if the userspace application knows exactly how to
+communicate with the hardware device, and is able to construct the HID
+reports manually. This is often the case when making userspace drivers for
+custom HID devices.
+
+Hidraw is also useful for communicating with non-conformant HID devices
+which send and receive data in a way that is inconsistent with their report
+descriptors. Because hiddev parses reports which are sent and received
+through it, checking them against the device's report descriptor, such
+communication with these non-conformant devices is impossible using hiddev.
+Hidraw is the only alternative, short of writing a custom kernel driver, for
+these non-conformant devices.
+
+A benefit of hidraw is that its use by userspace applications is independent
+of the underlying hardware type. Currently, Hidraw is implemented for USB
+and Bluetooth. In the future, as new hardware bus types are developed which
+use the HID specification, hidraw will be expanded to add support for these
+new bus types.
+
+Hidraw uses a dynamic major number, meaning that udev should be relied on to
+create hidraw device nodes. Udev will typically create the device nodes
+directly under /dev (eg: /dev/hidraw0). As this location is distribution-
+and udev rule-dependent, applications should use libudev to locate hidraw
+devices attached to the system. There is a tutorial on libudev with a
+working example at:
+ http://www.signal11.us/oss/udev/
+
+The HIDRAW API
+---------------
+
+read()
+-------
+read() will read a queued report received from the HID device. On USB
+devices, the reports read using read() are the reports sent from the device
+on the INTERRUPT IN endpoint. By default, read() will block until there is
+a report available to be read. read() can be made non-blocking, by passing
+the O_NONBLOCK flag to open(), or by setting the O_NONBLOCK flag using
+fcntl().
+
+On a device which uses numbered reports, the first byte of the returned data
+will be the report number; the report data follows, beginning in the second
+byte. For devices which do not use numbered reports, the report data
+will begin at the first byte.
+
+write()
+--------
+The write() function will write a report to the device. For USB devices, if
+the device has an INTERRUPT OUT endpoint, the report will be sent on that
+endpoint. If it does not, the report will be sent over the control endpoint,
+using a SET_REPORT transfer.
+
+The first byte of the buffer passed to write() should be set to the report
+number. If the device does not use numbered reports, the first byte should
+be set to 0. The report data itself should begin at the second byte.
+
+ioctl()
+--------
+Hidraw supports the following ioctls:
+
+HIDIOCGRDESCSIZE: Get Report Descriptor Size
+This ioctl will get the size of the device's report descriptor.
+
+HIDIOCGRDESC: Get Report Descriptor
+This ioctl returns the device's report descriptor using a
+hidraw_report_descriptor struct. Make sure to set the size field of the
+hidraw_report_descriptor struct to the size returned from HIDIOCGRDESCSIZE.
+
+HIDIOCGRAWINFO: Get Raw Info
+This ioctl will return a hidraw_devinfo struct containing the bus type, the
+vendor ID (VID), and product ID (PID) of the device. The bus type can be one
+of:
+ BUS_USB
+ BUS_HIL
+ BUS_BLUETOOTH
+ BUS_VIRTUAL
+which are defined in linux/input.h.
+
+HIDIOCGRAWNAME(len): Get Raw Name
+This ioctl returns a string containing the vendor and product strings of
+the device. The returned string is Unicode, UTF-8 encoded.
+
+HIDIOCGRAWPHYS(len): Get Physical Address
+This ioctl returns a string representing the physical address of the device.
+For USB devices, the string contains the physical path to the device (the
+USB controller, hubs, ports, etc). For Bluetooth devices, the string
+contains the hardware (MAC) address of the device.
+
+HIDIOCSFEATURE(len): Send a Feature Report
+This ioctl will send a feature report to the device. Per the HID
+specification, feature reports are always sent using the control endpoint.
+Set the first byte of the supplied buffer to the report number. For devices
+which do not use numbered reports, set the first byte to 0. The report data
+begins in the second byte. Make sure to set len accordingly, to one more
+than the length of the report (to account for the report number).
+
+HIDIOCGFEATURE(len): Get a Feature Report
+This ioctl will request a feature report from the device using the control
+endpoint. The first byte of the supplied buffer should be set to the report
+number of the requested report. For devices which do not use numbered
+reports, set the first byte to 0. The report will be returned starting at
+the first byte of the buffer (ie: the report number is not returned).
+
+Example
+---------
+In samples/, find hid-example.c, which shows examples of read(), write(),
+and all the ioctls for hidraw. The code may be used by anyone for any
+purpose, and can serve as a starting point for developing applications using
+hidraw.
+
+Document by:
+ Alan Ott <alan@signal11.us>, Signal 11 Software
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 9de9e97..67d2a75 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -55,12 +55,6 @@
menu "Special HID drivers"
depends on HID
-config HID_3M_PCT
- tristate "3M PCT touchscreen"
- depends on USB_HID
- ---help---
- Support for 3M PCT touch screens.
-
config HID_A4TECH
tristate "A4 tech mice" if EXPERT
depends on USB_HID
@@ -100,12 +94,6 @@
---help---
Support for Belkin Flip KVM and Wireless keyboard.
-config HID_CANDO
- tristate "Cando dual touch panel"
- depends on USB_HID
- ---help---
- Support for Cando dual touch panel.
-
config HID_CHERRY
tristate "Cherry Cymotion keyboard" if EXPERT
depends on USB_HID
@@ -300,12 +288,6 @@
---help---
Support for Microsoft devices that are not fully compliant with HID standard.
-config HID_MOSART
- tristate "MosArt dual-touch panels"
- depends on USB_HID
- ---help---
- Support for MosArt dual-touch panels.
-
config HID_MONTEREY
tristate "Monterey Genius KB29E keyboard" if EXPERT
depends on USB_HID
@@ -320,13 +302,25 @@
Generic support for HID multitouch panels.
Say Y here if you have one of the following devices:
+ - 3M PCT touch screens
+ - ActionStar dual touch panels
+ - Cando dual touch panels
+ - CVTouch panels
- Cypress TrueTouch panels
+ - Elo TouchSystems IntelliTouch Plus panels
+ - GeneralTouch 'Sensing Win7-TwoFinger' panels
+ - GoodTouch panels
- Hanvon dual touch panels
+ - Ilitek dual touch panels
- IrTouch Infrared USB panels
+ - Lumio CrystalTouch panels
+ - MosArt dual-touch panels
+ - PenMount dual touch panels
- Pixcir dual touch panels
- - 'Sensing Win7-TwoFinger' panel by GeneralTouch
- - eGalax dual-touch panels, including the
- Joojoo and Wetab tablets
+ - eGalax dual-touch panels, including the Joojoo and Wetab tablets
+ - Stantum multitouch panels
+ - Touch International Panels
+ - Unitec Panels
If unsure, say N.
@@ -500,12 +494,6 @@
---help---
Support for Sony PS3 controller.
-config HID_STANTUM
- tristate "Stantum multitouch panel"
- depends on USB_HID
- ---help---
- Support for Stantum multitouch panel.
-
config HID_SUNPLUS
tristate "Sunplus wireless desktop"
depends on USB_HID
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 06c68ae..f8cc4ea 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -25,12 +25,10 @@
hid-logitech-y += hid-lg4ff.o
endif
-obj-$(CONFIG_HID_3M_PCT) += hid-3m-pct.o
obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o
obj-$(CONFIG_HID_ACRUX) += hid-axff.o
obj-$(CONFIG_HID_APPLE) += hid-apple.o
obj-$(CONFIG_HID_BELKIN) += hid-belkin.o
-obj-$(CONFIG_HID_CANDO) += hid-cando.o
obj-$(CONFIG_HID_CHERRY) += hid-cherry.o
obj-$(CONFIG_HID_CHICONY) += hid-chicony.o
obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o
@@ -47,7 +45,6 @@
obj-$(CONFIG_HID_MAGICMOUSE) += hid-magicmouse.o
obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o
obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o
-obj-$(CONFIG_HID_MOSART) += hid-mosart.o
obj-$(CONFIG_HID_MULTITOUCH) += hid-multitouch.o
obj-$(CONFIG_HID_NTRIG) += hid-ntrig.o
obj-$(CONFIG_HID_ORTEK) += hid-ortek.o
@@ -66,7 +63,6 @@
obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o
obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o
obj-$(CONFIG_HID_SONY) += hid-sony.o
-obj-$(CONFIG_HID_STANTUM) += hid-stantum.o
obj-$(CONFIG_HID_SUNPLUS) += hid-sunplus.o
obj-$(CONFIG_HID_GREENASIA) += hid-gaff.o
obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o
diff --git a/drivers/hid/hid-3m-pct.c b/drivers/hid/hid-3m-pct.c
deleted file mode 100644
index 5243ae2..0000000
--- a/drivers/hid/hid-3m-pct.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * HID driver for 3M PCT multitouch panels
- *
- * Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr>
- * Copyright (c) 2010 Henrik Rydberg <rydberg@euromail.se>
- * Copyright (c) 2010 Canonical, Ltd.
- *
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#include <linux/device.h>
-#include <linux/hid.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/usb.h>
-#include <linux/input/mt.h>
-
-MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
-MODULE_DESCRIPTION("3M PCT multitouch panels");
-MODULE_LICENSE("GPL");
-
-#include "hid-ids.h"
-
-#define MAX_SLOTS 60
-
-/* estimated signal-to-noise ratios */
-#define SN_MOVE 2048
-#define SN_WIDTH 128
-
-struct mmm_finger {
- __s32 x, y, w, h;
- bool touch, valid;
-};
-
-struct mmm_data {
- struct mmm_finger f[MAX_SLOTS];
- __u8 curid;
- __u8 nexp, nreal;
- bool touch, valid;
-};
-
-static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi,
- struct hid_field *field, struct hid_usage *usage,
- unsigned long **bit, int *max)
-{
- int f1 = field->logical_minimum;
- int f2 = field->logical_maximum;
- int df = f2 - f1;
-
- switch (usage->hid & HID_USAGE_PAGE) {
-
- case HID_UP_BUTTON:
- return -1;
-
- case HID_UP_GENDESK:
- switch (usage->hid) {
- case HID_GD_X:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_POSITION_X);
- input_set_abs_params(hi->input, ABS_MT_POSITION_X,
- f1, f2, df / SN_MOVE, 0);
- /* touchscreen emulation */
- input_set_abs_params(hi->input, ABS_X,
- f1, f2, df / SN_MOVE, 0);
- return 1;
- case HID_GD_Y:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_POSITION_Y);
- input_set_abs_params(hi->input, ABS_MT_POSITION_Y,
- f1, f2, df / SN_MOVE, 0);
- /* touchscreen emulation */
- input_set_abs_params(hi->input, ABS_Y,
- f1, f2, df / SN_MOVE, 0);
- return 1;
- }
- return 0;
-
- case HID_UP_DIGITIZER:
- switch (usage->hid) {
- /* we do not want to map these: no input-oriented meaning */
- case 0x14:
- case 0x23:
- case HID_DG_INPUTMODE:
- case HID_DG_DEVICEINDEX:
- case HID_DG_CONTACTCOUNT:
- case HID_DG_CONTACTMAX:
- case HID_DG_INRANGE:
- case HID_DG_CONFIDENCE:
- return -1;
- case HID_DG_TIPSWITCH:
- /* touchscreen emulation */
- hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
- input_set_capability(hi->input, EV_KEY, BTN_TOUCH);
- return 1;
- case HID_DG_WIDTH:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_TOUCH_MAJOR);
- input_set_abs_params(hi->input, ABS_MT_TOUCH_MAJOR,
- f1, f2, df / SN_WIDTH, 0);
- return 1;
- case HID_DG_HEIGHT:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_TOUCH_MINOR);
- input_set_abs_params(hi->input, ABS_MT_TOUCH_MINOR,
- f1, f2, df / SN_WIDTH, 0);
- input_set_abs_params(hi->input, ABS_MT_ORIENTATION,
- 0, 1, 0, 0);
- return 1;
- case HID_DG_CONTACTID:
- input_mt_init_slots(hi->input, MAX_SLOTS);
- return 1;
- }
- /* let hid-input decide for the others */
- return 0;
-
- case 0xff000000:
- /* we do not want to map these: no input-oriented meaning */
- return -1;
- }
-
- return 0;
-}
-
-static int mmm_input_mapped(struct hid_device *hdev, struct hid_input *hi,
- struct hid_field *field, struct hid_usage *usage,
- unsigned long **bit, int *max)
-{
- /* tell hid-input to skip setup of these event types */
- if (usage->type == EV_KEY || usage->type == EV_ABS)
- set_bit(usage->type, hi->input->evbit);
- return -1;
-}
-
-/*
- * this function is called when a whole packet has been received and processed,
- * so that it can decide what to send to the input layer.
- */
-static void mmm_filter_event(struct mmm_data *md, struct input_dev *input)
-{
- int i;
- for (i = 0; i < MAX_SLOTS; ++i) {
- struct mmm_finger *f = &md->f[i];
- if (!f->valid) {
- /* this finger is just placeholder data, ignore */
- continue;
- }
- input_mt_slot(input, i);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, f->touch);
- if (f->touch) {
- /* this finger is on the screen */
- int wide = (f->w > f->h);
- /* divided by two to match visual scale of touch */
- int major = max(f->w, f->h) >> 1;
- int minor = min(f->w, f->h) >> 1;
-
- input_event(input, EV_ABS, ABS_MT_POSITION_X, f->x);
- input_event(input, EV_ABS, ABS_MT_POSITION_Y, f->y);
- input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide);
- input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
- input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, minor);
- }
- f->valid = 0;
- }
-
- input_mt_report_pointer_emulation(input, true);
- input_sync(input);
-}
-
-/*
- * this function is called upon all reports
- * so that we can accumulate contact point information,
- * and call input_mt_sync after each point.
- */
-static int mmm_event(struct hid_device *hid, struct hid_field *field,
- struct hid_usage *usage, __s32 value)
-{
- struct mmm_data *md = hid_get_drvdata(hid);
- /*
- * strangely, this function can be called before
- * field->hidinput is initialized!
- */
- if (hid->claimed & HID_CLAIMED_INPUT) {
- struct input_dev *input = field->hidinput->input;
- switch (usage->hid) {
- case HID_DG_TIPSWITCH:
- md->touch = value;
- break;
- case HID_DG_CONFIDENCE:
- md->valid = value;
- break;
- case HID_DG_WIDTH:
- if (md->valid)
- md->f[md->curid].w = value;
- break;
- case HID_DG_HEIGHT:
- if (md->valid)
- md->f[md->curid].h = value;
- break;
- case HID_DG_CONTACTID:
- value = clamp_val(value, 0, MAX_SLOTS - 1);
- if (md->valid) {
- md->curid = value;
- md->f[value].touch = md->touch;
- md->f[value].valid = 1;
- md->nreal++;
- }
- break;
- case HID_GD_X:
- if (md->valid)
- md->f[md->curid].x = value;
- break;
- case HID_GD_Y:
- if (md->valid)
- md->f[md->curid].y = value;
- break;
- case HID_DG_CONTACTCOUNT:
- if (value)
- md->nexp = value;
- if (md->nreal >= md->nexp) {
- mmm_filter_event(md, input);
- md->nreal = 0;
- }
- break;
- }
- }
-
- /* we have handled the hidinput part, now remains hiddev */
- if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
- hid->hiddev_hid_event(hid, field, usage, value);
-
- return 1;
-}
-
-static int mmm_probe(struct hid_device *hdev, const struct hid_device_id *id)
-{
- int ret;
- struct mmm_data *md;
-
- hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC;
-
- md = kzalloc(sizeof(struct mmm_data), GFP_KERNEL);
- if (!md) {
- hid_err(hdev, "cannot allocate 3M data\n");
- return -ENOMEM;
- }
- hid_set_drvdata(hdev, md);
-
- ret = hid_parse(hdev);
- if (!ret)
- ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
-
- if (ret)
- kfree(md);
- return ret;
-}
-
-static void mmm_remove(struct hid_device *hdev)
-{
- hid_hw_stop(hdev);
- kfree(hid_get_drvdata(hdev));
- hid_set_drvdata(hdev, NULL);
-}
-
-static const struct hid_device_id mmm_devices[] = {
- { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) },
- { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M2256) },
- { }
-};
-MODULE_DEVICE_TABLE(hid, mmm_devices);
-
-static const struct hid_usage_id mmm_grabbed_usages[] = {
- { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
- { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
-};
-
-static struct hid_driver mmm_driver = {
- .name = "3m-pct",
- .id_table = mmm_devices,
- .probe = mmm_probe,
- .remove = mmm_remove,
- .input_mapping = mmm_input_mapping,
- .input_mapped = mmm_input_mapped,
- .usage_table = mmm_grabbed_usages,
- .event = mmm_event,
-};
-
-static int __init mmm_init(void)
-{
- return hid_register_driver(&mmm_driver);
-}
-
-static void __exit mmm_exit(void)
-{
- hid_unregister_driver(&mmm_driver);
-}
-
-module_init(mmm_init);
-module_exit(mmm_exit);
-
diff --git a/drivers/hid/hid-cando.c b/drivers/hid/hid-cando.c
deleted file mode 100644
index 1ea066c..0000000
--- a/drivers/hid/hid-cando.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * HID driver for Cando dual-touch panels
- *
- * Copyright (c) 2010 Stephane Chatty <chatty@enac.fr>
- *
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#include <linux/device.h>
-#include <linux/hid.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-
-MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
-MODULE_DESCRIPTION("Cando dual-touch panel");
-MODULE_LICENSE("GPL");
-
-#include "hid-ids.h"
-
-struct cando_data {
- __u16 x, y;
- __u8 id;
- __s8 oldest; /* id of the oldest finger in previous frame */
- bool valid; /* valid finger data, or just placeholder? */
- bool first; /* is this the first finger in this frame? */
- __s8 firstid; /* id of the first finger in the frame */
- __u16 firstx, firsty; /* (x, y) of the first finger in the frame */
-};
-
-static int cando_input_mapping(struct hid_device *hdev, struct hid_input *hi,
- struct hid_field *field, struct hid_usage *usage,
- unsigned long **bit, int *max)
-{
- switch (usage->hid & HID_USAGE_PAGE) {
-
- case HID_UP_GENDESK:
- switch (usage->hid) {
- case HID_GD_X:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_POSITION_X);
- /* touchscreen emulation */
- input_set_abs_params(hi->input, ABS_X,
- field->logical_minimum,
- field->logical_maximum, 0, 0);
- return 1;
- case HID_GD_Y:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_POSITION_Y);
- /* touchscreen emulation */
- input_set_abs_params(hi->input, ABS_Y,
- field->logical_minimum,
- field->logical_maximum, 0, 0);
- return 1;
- }
- return 0;
-
- case HID_UP_DIGITIZER:
- switch (usage->hid) {
- case HID_DG_TIPSWITCH:
- case HID_DG_CONTACTMAX:
- return -1;
- case HID_DG_INRANGE:
- /* touchscreen emulation */
- hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
- return 1;
- case HID_DG_CONTACTID:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_TRACKING_ID);
- return 1;
- }
- return 0;
- }
-
- return 0;
-}
-
-static int cando_input_mapped(struct hid_device *hdev, struct hid_input *hi,
- struct hid_field *field, struct hid_usage *usage,
- unsigned long **bit, int *max)
-{
- if (usage->type == EV_KEY || usage->type == EV_ABS)
- clear_bit(usage->code, *bit);
-
- return 0;
-}
-
-/*
- * this function is called when a whole finger has been parsed,
- * so that it can decide what to send to the input layer.
- */
-static void cando_filter_event(struct cando_data *td, struct input_dev *input)
-{
- td->first = !td->first; /* touchscreen emulation */
-
- if (!td->valid) {
- /*
- * touchscreen emulation: if this is the second finger and
- * the first was valid, the first was the oldest; if the
- * first was not valid and there was a valid finger in the
- * previous frame, this is a release.
- */
- if (td->first) {
- td->firstid = -1;
- } else if (td->firstid >= 0) {
- input_event(input, EV_ABS, ABS_X, td->firstx);
- input_event(input, EV_ABS, ABS_Y, td->firsty);
- td->oldest = td->firstid;
- } else if (td->oldest >= 0) {
- input_event(input, EV_KEY, BTN_TOUCH, 0);
- td->oldest = -1;
- }
-
- return;
- }
-
- input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
- input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
- input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
-
- input_mt_sync(input);
-
- /*
- * touchscreen emulation: if there was no touching finger previously,
- * emit touch event
- */
- if (td->oldest < 0) {
- input_event(input, EV_KEY, BTN_TOUCH, 1);
- td->oldest = td->id;
- }
-
- /*
- * touchscreen emulation: if this is the first finger, wait for the
- * second; the oldest is then the second if it was the oldest already
- * or if there was no first, the first otherwise.
- */
- if (td->first) {
- td->firstx = td->x;
- td->firsty = td->y;
- td->firstid = td->id;
- } else {
- int x, y, oldest;
- if (td->id == td->oldest || td->firstid < 0) {
- x = td->x;
- y = td->y;
- oldest = td->id;
- } else {
- x = td->firstx;
- y = td->firsty;
- oldest = td->firstid;
- }
- input_event(input, EV_ABS, ABS_X, x);
- input_event(input, EV_ABS, ABS_Y, y);
- td->oldest = oldest;
- }
-}
-
-
-static int cando_event(struct hid_device *hid, struct hid_field *field,
- struct hid_usage *usage, __s32 value)
-{
- struct cando_data *td = hid_get_drvdata(hid);
-
- if (hid->claimed & HID_CLAIMED_INPUT) {
- struct input_dev *input = field->hidinput->input;
-
- switch (usage->hid) {
- case HID_DG_INRANGE:
- td->valid = value;
- break;
- case HID_DG_CONTACTID:
- td->id = value;
- break;
- case HID_GD_X:
- td->x = value;
- break;
- case HID_GD_Y:
- td->y = value;
- cando_filter_event(td, input);
- break;
- case HID_DG_TIPSWITCH:
- /* avoid interference from generic hidinput handling */
- break;
-
- default:
- /* fallback to the generic hidinput handling */
- return 0;
- }
- }
-
- /* we have handled the hidinput part, now remains hiddev */
- if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
- hid->hiddev_hid_event(hid, field, usage, value);
-
- return 1;
-}
-
-static int cando_probe(struct hid_device *hdev, const struct hid_device_id *id)
-{
- int ret;
- struct cando_data *td;
-
- td = kmalloc(sizeof(struct cando_data), GFP_KERNEL);
- if (!td) {
- hid_err(hdev, "cannot allocate Cando Touch data\n");
- return -ENOMEM;
- }
- hid_set_drvdata(hdev, td);
- td->first = false;
- td->oldest = -1;
- td->valid = false;
-
- ret = hid_parse(hdev);
- if (!ret)
- ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
-
- if (ret)
- kfree(td);
-
- return ret;
-}
-
-static void cando_remove(struct hid_device *hdev)
-{
- hid_hw_stop(hdev);
- kfree(hid_get_drvdata(hdev));
- hid_set_drvdata(hdev, NULL);
-}
-
-static const struct hid_device_id cando_devices[] = {
- { HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
- USB_DEVICE_ID_CANDO_MULTI_TOUCH) },
- { HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
- USB_DEVICE_ID_CANDO_MULTI_TOUCH_10_1) },
- { HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
- USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) },
- { HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
- USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) },
- { }
-};
-MODULE_DEVICE_TABLE(hid, cando_devices);
-
-static const struct hid_usage_id cando_grabbed_usages[] = {
- { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
- { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
-};
-
-static struct hid_driver cando_driver = {
- .name = "cando-touch",
- .id_table = cando_devices,
- .probe = cando_probe,
- .remove = cando_remove,
- .input_mapping = cando_input_mapping,
- .input_mapped = cando_input_mapped,
- .usage_table = cando_grabbed_usages,
- .event = cando_event,
-};
-
-static int __init cando_init(void)
-{
- return hid_register_driver(&cando_driver);
-}
-
-static void __exit cando_exit(void)
-{
- hid_unregister_driver(&cando_driver);
-}
-
-module_init(cando_init);
-module_exit(cando_exit);
-
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 408c4be..4140fd2 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1045,6 +1045,9 @@
rsize = ((report->size - 1) >> 3) + 1;
+ if (rsize > HID_MAX_BUFFER_SIZE)
+ rsize = HID_MAX_BUFFER_SIZE;
+
if (csize < rsize) {
dbg_hid("report %d is too short, (%d < %d)\n", report->id,
csize, rsize);
@@ -1290,6 +1293,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_RP_649) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ACRUX, 0x0802) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ACTIONSTAR, USB_DEVICE_ID_ACTIONSTAR_1011) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) },
@@ -1356,6 +1360,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH, USB_DEVICE_ID_CVTOUCH_SCREEN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3) },
@@ -1369,17 +1374,20 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH4) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2515) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GOODTOUCH, USB_DEVICE_ID_GOODTOUCH_000f) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0012) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_HANVON, USB_DEVICE_ID_HANVON_MULTITOUCH) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ILITEK, USB_DEVICE_ID_ILITEK_MULTITOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_IRTOUCHSYSTEMS, USB_DEVICE_ID_IRTOUCH_INFRARED_USB) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KEYTOUCH, USB_DEVICE_ID_KEYTOUCH_IEC) },
@@ -1408,10 +1416,12 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_DFP_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G27_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WII_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) },
@@ -1441,6 +1451,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_PKB1700) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_PCI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
@@ -1454,6 +1465,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) },
@@ -1470,12 +1482,15 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_TOUCH_INTL, USB_DEVICE_ID_TOUCH_INTL_MULTI_TOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_UNITEC, USB_DEVICE_ID_UNITEC_USB_TOUCH_0709) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_UNITEC, USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 00a94b5..e715c43 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -37,6 +37,9 @@
#define USB_VENDOR_ID_ACRUX 0x1a34
+#define USB_VENDOR_ID_ACTIONSTAR 0x2101
+#define USB_DEVICE_ID_ACTIONSTAR_1011 0x1011
+
#define USB_VENDOR_ID_ADS_TECH 0x06e1
#define USB_DEVICE_ID_ADS_TECH_RADIO_SI470X 0xa155
@@ -182,6 +185,9 @@
#define USB_VENDOR_ID_CREATIVELABS 0x041e
#define USB_DEVICE_ID_PRODIKEYS_PCMIDI 0x2801
+#define USB_VENDOR_ID_CVTOUCH 0x1ff7
+#define USB_DEVICE_ID_CVTOUCH_SCREEN 0x0013
+
#define USB_VENDOR_ID_CYGNAL 0x10c4
#define USB_DEVICE_ID_CYGNAL_RADIO_SI470X 0x818a
@@ -220,6 +226,7 @@
#define USB_VENDOR_ID_DREAM_CHEEKY 0x1d34
#define USB_VENDOR_ID_ELO 0x04E7
+#define USB_DEVICE_ID_ELO_TS2515 0x0022
#define USB_DEVICE_ID_ELO_TS2700 0x0020
#define USB_VENDOR_ID_EMS 0x2006
@@ -255,6 +262,9 @@
#define USB_DEVICE_ID_0_8_8_IF_KIT 0x0053
#define USB_DEVICE_ID_PHIDGET_MOTORCONTROL 0x0058
+#define USB_VENDOR_ID_GOODTOUCH 0x1aad
+#define USB_DEVICE_ID_GOODTOUCH_000f 0x000f
+
#define USB_VENDOR_ID_GOTOP 0x08f2
#define USB_DEVICE_ID_SUPER_Q2 0x007f
#define USB_DEVICE_ID_GOGOPEN 0x00ce
@@ -334,6 +344,9 @@
#define USB_DEVICE_ID_UGCI_FLYING 0x0020
#define USB_DEVICE_ID_UGCI_FIGHTING 0x0030
+#define USB_VENDOR_ID_ILITEK 0x222a
+#define USB_DEVICE_ID_ILITEK_MULTITOUCH 0x0001
+
#define USB_VENDOR_ID_IMATION 0x0718
#define USB_DEVICE_ID_DISC_STAKKA 0xd000
@@ -398,6 +411,7 @@
#define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL 0xc295
#define USB_DEVICE_ID_LOGITECH_DFP_WHEEL 0xc298
#define USB_DEVICE_ID_LOGITECH_G25_WHEEL 0xc299
+#define USB_DEVICE_ID_LOGITECH_G27_WHEEL 0xc29b
#define USB_DEVICE_ID_LOGITECH_WII_WHEEL 0xc29c
#define USB_DEVICE_ID_LOGITECH_ELITE_KBD 0xc30a
#define USB_DEVICE_ID_S510_RECEIVER 0xc50c
@@ -411,6 +425,9 @@
#define USB_DEVICE_ID_DINOVO_MINI 0xc71f
#define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2 0xca03
+#define USB_VENDOR_ID_LUMIO 0x202e
+#define USB_DEVICE_ID_CRYSTALTOUCH 0x0006
+
#define USB_VENDOR_ID_MCC 0x09db
#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
#define USB_DEVICE_ID_MCC_PMD1208LS 0x007a
@@ -488,6 +505,9 @@
#define USB_VENDOR_ID_PANTHERLORD 0x0810
#define USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK 0x0001
+#define USB_VENDOR_ID_PENMOUNT 0x14e1
+#define USB_DEVICE_ID_PENMOUNT_PCI 0x3500
+
#define USB_VENDOR_ID_PETALYNX 0x18b1
#define USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE 0x0037
@@ -531,6 +551,7 @@
#define USB_VENDOR_ID_SONY 0x054c
#define USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE 0x024b
#define USB_DEVICE_ID_SONY_PS3_CONTROLLER 0x0268
+#define USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER 0x042f
#define USB_VENDOR_ID_SOUNDGRAPH 0x15c2
#define USB_DEVICE_ID_SOUNDGRAPH_IMON_FIRST 0x0034
@@ -551,6 +572,10 @@
#define USB_VENDOR_ID_SUNPLUS 0x04fc
#define USB_DEVICE_ID_SUNPLUS_WDESKTOP 0x05d8
+#define USB_VENDOR_ID_SYMBOL 0x05e0
+#define USB_DEVICE_ID_SYMBOL_SCANNER_1 0x0800
+#define USB_DEVICE_ID_SYMBOL_SCANNER_2 0x1300
+
#define USB_VENDOR_ID_THRUSTMASTER 0x044f
#define USB_VENDOR_ID_TOPSEED 0x0766
@@ -562,6 +587,9 @@
#define USB_VENDOR_ID_TOPMAX 0x0663
#define USB_DEVICE_ID_TOPMAX_COBRAPAD 0x0103
+#define USB_VENDOR_ID_TOUCH_INTL 0x1e5e
+#define USB_DEVICE_ID_TOUCH_INTL_MULTI_TOUCH 0x0313
+
#define USB_VENDOR_ID_TOUCHPACK 0x1bfd
#define USB_DEVICE_ID_TOUCHPACK_RTS 0x1688
@@ -579,6 +607,10 @@
#define USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U 0x0004
#define USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U 0x0005
+#define USB_VENDOR_ID_UNITEC 0x227d
+#define USB_DEVICE_ID_UNITEC_USB_TOUCH_0709 0x0709
+#define USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19 0x0a19
+
#define USB_VENDOR_ID_VERNIER 0x08f7
#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001
#define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002
diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c
index 3da9040..21f205f 100644
--- a/drivers/hid/hid-lg.c
+++ b/drivers/hid/hid-lg.c
@@ -377,6 +377,8 @@
.driver_data = LG_FF },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL),
.driver_data = LG_FF },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G27_WHEEL),
+ .driver_data = LG_FF },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_DFP_WHEEL),
.driver_data = LG_FF },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WII_WHEEL),
diff --git a/drivers/hid/hid-lgff.c b/drivers/hid/hid-lgff.c
index f099079..088f850 100644
--- a/drivers/hid/hid-lgff.c
+++ b/drivers/hid/hid-lgff.c
@@ -72,6 +72,9 @@
{ 0x046d, 0xc287, ff_joystick_ac },
{ 0x046d, 0xc293, ff_joystick },
{ 0x046d, 0xc294, ff_wheel },
+ { 0x046d, 0xc298, ff_wheel },
+ { 0x046d, 0xc299, ff_wheel },
+ { 0x046d, 0xc29b, ff_wheel },
{ 0x046d, 0xc295, ff_joystick },
{ 0x046d, 0xc298, ff_wheel },
{ 0x046d, 0xc299, ff_wheel },
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
index 0ec91c1..a5eda4c 100644
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -501,9 +501,17 @@
}
report->size = 6;
+ /*
+ * The device reponds with 'invalid report id' when feature
+ * report switching it into multitouch mode is sent to it.
+ *
+ * This results in -EIO from the _raw low-level transport callback,
+ * but there seems to be no other way of switching the mode.
+ * Thus the super-ugly hacky success check below.
+ */
ret = hdev->hid_output_raw_report(hdev, feature, sizeof(feature),
HID_FEATURE_REPORT);
- if (ret != sizeof(feature)) {
+ if (ret != -EIO) {
hid_err(hdev, "unable to request touch data (%d)\n", ret);
goto err_stop_hw;
}
diff --git a/drivers/hid/hid-mosart.c b/drivers/hid/hid-mosart.c
deleted file mode 100644
index aed7ffe..0000000
--- a/drivers/hid/hid-mosart.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * HID driver for the multitouch panel on the ASUS EeePC T91MT
- *
- * Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr>
- * Copyright (c) 2010 Teemu Tuominen <teemu.tuominen@cybercom.com>
- *
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#include <linux/device.h>
-#include <linux/hid.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/usb.h>
-#include "usbhid/usbhid.h"
-
-MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
-MODULE_DESCRIPTION("MosArt dual-touch panel");
-MODULE_LICENSE("GPL");
-
-#include "hid-ids.h"
-
-struct mosart_data {
- __u16 x, y;
- __u8 id;
- bool valid; /* valid finger data, or just placeholder? */
- bool first; /* is this the first finger in this frame? */
- bool activity_now; /* at least one active finger in this frame? */
- bool activity; /* at least one active finger previously? */
-};
-
-static int mosart_input_mapping(struct hid_device *hdev, struct hid_input *hi,
- struct hid_field *field, struct hid_usage *usage,
- unsigned long **bit, int *max)
-{
- switch (usage->hid & HID_USAGE_PAGE) {
-
- case HID_UP_GENDESK:
- switch (usage->hid) {
- case HID_GD_X:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_POSITION_X);
- /* touchscreen emulation */
- input_set_abs_params(hi->input, ABS_X,
- field->logical_minimum,
- field->logical_maximum, 0, 0);
- return 1;
- case HID_GD_Y:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_POSITION_Y);
- /* touchscreen emulation */
- input_set_abs_params(hi->input, ABS_Y,
- field->logical_minimum,
- field->logical_maximum, 0, 0);
- return 1;
- }
- return 0;
-
- case HID_UP_DIGITIZER:
- switch (usage->hid) {
- case HID_DG_CONFIDENCE:
- case HID_DG_TIPSWITCH:
- case HID_DG_INPUTMODE:
- case HID_DG_DEVICEINDEX:
- case HID_DG_CONTACTCOUNT:
- case HID_DG_CONTACTMAX:
- case HID_DG_TIPPRESSURE:
- case HID_DG_WIDTH:
- case HID_DG_HEIGHT:
- return -1;
- case HID_DG_INRANGE:
- /* touchscreen emulation */
- hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
- return 1;
-
- case HID_DG_CONTACTID:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_TRACKING_ID);
- return 1;
-
- }
- return 0;
-
- case 0xff000000:
- /* ignore HID features */
- return -1;
-
- case HID_UP_BUTTON:
- /* ignore buttons */
- return -1;
- }
-
- return 0;
-}
-
-static int mosart_input_mapped(struct hid_device *hdev, struct hid_input *hi,
- struct hid_field *field, struct hid_usage *usage,
- unsigned long **bit, int *max)
-{
- if (usage->type == EV_KEY || usage->type == EV_ABS)
- clear_bit(usage->code, *bit);
-
- return 0;
-}
-
-/*
- * this function is called when a whole finger has been parsed,
- * so that it can decide what to send to the input layer.
- */
-static void mosart_filter_event(struct mosart_data *td, struct input_dev *input)
-{
- td->first = !td->first; /* touchscreen emulation */
-
- if (!td->valid) {
- /*
- * touchscreen emulation: if no finger in this frame is valid
- * and there previously was finger activity, this is a release
- */
- if (!td->first && !td->activity_now && td->activity) {
- input_event(input, EV_KEY, BTN_TOUCH, 0);
- td->activity = false;
- }
- return;
- }
-
- input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
- input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
- input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
-
- input_mt_sync(input);
- td->valid = false;
-
- /* touchscreen emulation: if first active finger in this frame... */
- if (!td->activity_now) {
- /* if there was no previous activity, emit touch event */
- if (!td->activity) {
- input_event(input, EV_KEY, BTN_TOUCH, 1);
- td->activity = true;
- }
- td->activity_now = true;
- /* and in any case this is our preferred finger */
- input_event(input, EV_ABS, ABS_X, td->x);
- input_event(input, EV_ABS, ABS_Y, td->y);
- }
-}
-
-
-static int mosart_event(struct hid_device *hid, struct hid_field *field,
- struct hid_usage *usage, __s32 value)
-{
- struct mosart_data *td = hid_get_drvdata(hid);
-
- if (hid->claimed & HID_CLAIMED_INPUT) {
- struct input_dev *input = field->hidinput->input;
- switch (usage->hid) {
- case HID_DG_INRANGE:
- td->valid = !!value;
- break;
- case HID_GD_X:
- td->x = value;
- break;
- case HID_GD_Y:
- td->y = value;
- mosart_filter_event(td, input);
- break;
- case HID_DG_CONTACTID:
- td->id = value;
- break;
- case HID_DG_CONTACTCOUNT:
- /* touch emulation: this is the last field in a frame */
- td->first = false;
- td->activity_now = false;
- break;
- case HID_DG_CONFIDENCE:
- case HID_DG_TIPSWITCH:
- /* avoid interference from generic hidinput handling */
- break;
-
- default:
- /* fallback to the generic hidinput handling */
- return 0;
- }
- }
-
- /* we have handled the hidinput part, now remains hiddev */
- if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
- hid->hiddev_hid_event(hid, field, usage, value);
-
- return 1;
-}
-
-static int mosart_probe(struct hid_device *hdev, const struct hid_device_id *id)
-{
- int ret;
- struct mosart_data *td;
-
-
- td = kmalloc(sizeof(struct mosart_data), GFP_KERNEL);
- if (!td) {
- hid_err(hdev, "cannot allocate MosArt data\n");
- return -ENOMEM;
- }
- td->valid = false;
- td->activity = false;
- td->activity_now = false;
- td->first = false;
- hid_set_drvdata(hdev, td);
-
- /* currently, it's better to have one evdev device only */
-#if 0
- hdev->quirks |= HID_QUIRK_MULTI_INPUT;
-#endif
-
- ret = hid_parse(hdev);
- if (ret == 0)
- ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
-
- if (ret == 0) {
- struct hid_report_enum *re = hdev->report_enum
- + HID_FEATURE_REPORT;
- struct hid_report *r = re->report_id_hash[7];
-
- r->field[0]->value[0] = 0x02;
- usbhid_submit_report(hdev, r, USB_DIR_OUT);
- } else
- kfree(td);
-
- return ret;
-}
-
-#ifdef CONFIG_PM
-static int mosart_reset_resume(struct hid_device *hdev)
-{
- struct hid_report_enum *re = hdev->report_enum
- + HID_FEATURE_REPORT;
- struct hid_report *r = re->report_id_hash[7];
-
- r->field[0]->value[0] = 0x02;
- usbhid_submit_report(hdev, r, USB_DIR_OUT);
- return 0;
-}
-#endif
-
-static void mosart_remove(struct hid_device *hdev)
-{
- hid_hw_stop(hdev);
- kfree(hid_get_drvdata(hdev));
- hid_set_drvdata(hdev, NULL);
-}
-
-static const struct hid_device_id mosart_devices[] = {
- { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT) },
- { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUSTEK_MULTITOUCH_YFO) },
- { HID_USB_DEVICE(USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART) },
- { }
-};
-MODULE_DEVICE_TABLE(hid, mosart_devices);
-
-static const struct hid_usage_id mosart_grabbed_usages[] = {
- { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
- { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
-};
-
-static struct hid_driver mosart_driver = {
- .name = "mosart",
- .id_table = mosart_devices,
- .probe = mosart_probe,
- .remove = mosart_remove,
- .input_mapping = mosart_input_mapping,
- .input_mapped = mosart_input_mapped,
- .usage_table = mosart_grabbed_usages,
- .event = mosart_event,
-#ifdef CONFIG_PM
- .reset_resume = mosart_reset_resume,
-#endif
-};
-
-static int __init mosart_init(void)
-{
- return hid_register_driver(&mosart_driver);
-}
-
-static void __exit mosart_exit(void)
-{
- hid_unregister_driver(&mosart_driver);
-}
-
-module_init(mosart_init);
-module_exit(mosart_exit);
-
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index ee01e65..ecd4d2d 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -11,6 +11,12 @@
* Copyright (c) 2010 Henrik Rydberg <rydberg@euromail.se>
* Copyright (c) 2010 Canonical, Ltd.
*
+ * This code is partly based on hid-3m-pct.c:
+ *
+ * Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr>
+ * Copyright (c) 2010 Henrik Rydberg <rydberg@euromail.se>
+ * Copyright (c) 2010 Canonical, Ltd.
+ *
*/
/*
@@ -44,6 +50,7 @@
#define MT_QUIRK_VALID_IS_INRANGE (1 << 4)
#define MT_QUIRK_VALID_IS_CONFIDENCE (1 << 5)
#define MT_QUIRK_EGALAX_XYZ_FIXUP (1 << 6)
+#define MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE (1 << 7)
struct mt_slot {
__s32 x, y, p, w, h;
@@ -60,24 +67,36 @@
__s8 inputmode; /* InputMode HID feature, -1 if non-existent */
__u8 num_received; /* how many contacts we received */
__u8 num_expected; /* expected last contact index */
+ __u8 maxcontacts;
bool curvalid; /* is the current contact valid? */
- struct mt_slot slots[0]; /* first slot */
+ struct mt_slot *slots;
};
struct mt_class {
__s32 name; /* MT_CLS */
__s32 quirks;
__s32 sn_move; /* Signal/noise ratio for move events */
+ __s32 sn_width; /* Signal/noise ratio for width events */
+ __s32 sn_height; /* Signal/noise ratio for height events */
__s32 sn_pressure; /* Signal/noise ratio for pressure events */
__u8 maxcontacts;
};
/* classes of device behavior */
-#define MT_CLS_DEFAULT 1
-#define MT_CLS_DUAL_INRANGE_CONTACTID 2
-#define MT_CLS_DUAL_INRANGE_CONTACTNUMBER 3
-#define MT_CLS_CYPRESS 4
-#define MT_CLS_EGALAX 5
+#define MT_CLS_DEFAULT 0x0001
+
+#define MT_CLS_CONFIDENCE 0x0002
+#define MT_CLS_CONFIDENCE_MINUS_ONE 0x0003
+#define MT_CLS_DUAL_INRANGE_CONTACTID 0x0004
+#define MT_CLS_DUAL_INRANGE_CONTACTNUMBER 0x0005
+#define MT_CLS_DUAL_NSMU_CONTACTID 0x0006
+
+/* vendor specific classes */
+#define MT_CLS_3M 0x0101
+#define MT_CLS_CYPRESS 0x0102
+#define MT_CLS_EGALAX 0x0103
+
+#define MT_DEFAULT_MAXCONTACT 10
/*
* these device-dependent functions determine what slot corresponds
@@ -95,12 +114,12 @@
static int find_slot_from_contactid(struct mt_device *td)
{
int i;
- for (i = 0; i < td->mtclass->maxcontacts; ++i) {
+ for (i = 0; i < td->maxcontacts; ++i) {
if (td->slots[i].contactid == td->curdata.contactid &&
td->slots[i].touch_state)
return i;
}
- for (i = 0; i < td->mtclass->maxcontacts; ++i) {
+ for (i = 0; i < td->maxcontacts; ++i) {
if (!td->slots[i].seen_in_this_frame &&
!td->slots[i].touch_state)
return i;
@@ -113,8 +132,12 @@
struct mt_class mt_classes[] = {
{ .name = MT_CLS_DEFAULT,
- .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP,
- .maxcontacts = 10 },
+ .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP },
+ { .name = MT_CLS_CONFIDENCE,
+ .quirks = MT_QUIRK_VALID_IS_CONFIDENCE },
+ { .name = MT_CLS_CONFIDENCE_MINUS_ONE,
+ .quirks = MT_QUIRK_VALID_IS_CONFIDENCE |
+ MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE },
{ .name = MT_CLS_DUAL_INRANGE_CONTACTID,
.quirks = MT_QUIRK_VALID_IS_INRANGE |
MT_QUIRK_SLOT_IS_CONTACTID,
@@ -123,11 +146,24 @@
.quirks = MT_QUIRK_VALID_IS_INRANGE |
MT_QUIRK_SLOT_IS_CONTACTNUMBER,
.maxcontacts = 2 },
+ { .name = MT_CLS_DUAL_NSMU_CONTACTID,
+ .quirks = MT_QUIRK_NOT_SEEN_MEANS_UP |
+ MT_QUIRK_SLOT_IS_CONTACTID,
+ .maxcontacts = 2 },
+
+ /*
+ * vendor specific classes
+ */
+ { .name = MT_CLS_3M,
+ .quirks = MT_QUIRK_VALID_IS_CONFIDENCE |
+ MT_QUIRK_SLOT_IS_CONTACTID,
+ .sn_move = 2048,
+ .sn_width = 128,
+ .sn_height = 128 },
{ .name = MT_CLS_CYPRESS,
.quirks = MT_QUIRK_NOT_SEEN_MEANS_UP |
MT_QUIRK_CYPRESS,
.maxcontacts = 10 },
-
{ .name = MT_CLS_EGALAX,
.quirks = MT_QUIRK_SLOT_IS_CONTACTID |
MT_QUIRK_VALID_IS_INRANGE |
@@ -136,15 +172,26 @@
.sn_move = 4096,
.sn_pressure = 32,
},
+
{ }
};
static void mt_feature_mapping(struct hid_device *hdev,
struct hid_field *field, struct hid_usage *usage)
{
- if (usage->hid == HID_DG_INPUTMODE) {
- struct mt_device *td = hid_get_drvdata(hdev);
+ struct mt_device *td = hid_get_drvdata(hdev);
+
+ switch (usage->hid) {
+ case HID_DG_INPUTMODE:
td->inputmode = field->report->id;
+ break;
+ case HID_DG_CONTACTMAX:
+ td->maxcontacts = field->value[0];
+ if (td->mtclass->maxcontacts)
+ /* check if the maxcontacts is given by the class */
+ td->maxcontacts = td->mtclass->maxcontacts;
+
+ break;
}
}
@@ -179,6 +226,7 @@
/* touchscreen emulation */
set_abs(hi->input, ABS_X, field, cls->sn_move);
td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
return 1;
case HID_GD_Y:
if (quirks & MT_QUIRK_EGALAX_XYZ_FIXUP)
@@ -190,6 +238,7 @@
/* touchscreen emulation */
set_abs(hi->input, ABS_Y, field, cls->sn_move);
td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
return 1;
}
return 0;
@@ -198,32 +247,40 @@
switch (usage->hid) {
case HID_DG_INRANGE:
td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
return 1;
case HID_DG_CONFIDENCE:
td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
return 1;
case HID_DG_TIPSWITCH:
hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
input_set_capability(hi->input, EV_KEY, BTN_TOUCH);
td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
return 1;
case HID_DG_CONTACTID:
- input_mt_init_slots(hi->input,
- td->mtclass->maxcontacts);
+ input_mt_init_slots(hi->input, td->maxcontacts);
td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
return 1;
case HID_DG_WIDTH:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TOUCH_MAJOR);
+ set_abs(hi->input, ABS_MT_TOUCH_MAJOR, field,
+ cls->sn_width);
td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
return 1;
case HID_DG_HEIGHT:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TOUCH_MINOR);
- field->logical_maximum = 1;
- field->logical_minimum = 0;
- set_abs(hi->input, ABS_MT_ORIENTATION, field, 0);
+ set_abs(hi->input, ABS_MT_TOUCH_MINOR, field,
+ cls->sn_height);
+ input_set_abs_params(hi->input,
+ ABS_MT_ORIENTATION, 0, 1, 0, 0);
td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
return 1;
case HID_DG_TIPPRESSURE:
if (quirks & MT_QUIRK_EGALAX_XYZ_FIXUP)
@@ -236,13 +293,15 @@
set_abs(hi->input, ABS_PRESSURE, field,
cls->sn_pressure);
td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
return 1;
case HID_DG_CONTACTCOUNT:
- td->last_field_index = field->report->maxfield - 1;
+ td->last_field_index = field->index;
return 1;
case HID_DG_CONTACTMAX:
/* we don't set td->last_slot_field as contactcount and
* contact max are global to the report */
+ td->last_field_index = field->index;
return -1;
}
/* let hid-input decide for the others */
@@ -279,6 +338,9 @@
if (quirks & MT_QUIRK_SLOT_IS_CONTACTNUMBER)
return td->num_received;
+ if (quirks & MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE)
+ return td->curdata.contactid - 1;
+
return find_slot_from_contactid(td);
}
@@ -292,7 +354,7 @@
if (td->curvalid) {
int slotnum = mt_compute_slot(td);
- if (slotnum >= 0 && slotnum < td->mtclass->maxcontacts)
+ if (slotnum >= 0 && slotnum < td->maxcontacts)
td->slots[slotnum] = td->curdata;
}
td->num_received++;
@@ -307,7 +369,7 @@
{
int i;
- for (i = 0; i < td->mtclass->maxcontacts; ++i) {
+ for (i = 0; i < td->maxcontacts; ++i) {
struct mt_slot *s = &(td->slots[i]);
if ((td->mtclass->quirks & MT_QUIRK_NOT_SEEN_MEANS_UP) &&
!s->seen_in_this_frame) {
@@ -318,11 +380,18 @@
input_mt_report_slot_state(input, MT_TOOL_FINGER,
s->touch_state);
if (s->touch_state) {
+ /* this finger is on the screen */
+ int wide = (s->w > s->h);
+ /* divided by two to match visual scale of touch */
+ int major = max(s->w, s->h) >> 1;
+ int minor = min(s->w, s->h) >> 1;
+
input_event(input, EV_ABS, ABS_MT_POSITION_X, s->x);
input_event(input, EV_ABS, ABS_MT_POSITION_Y, s->y);
+ input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide);
input_event(input, EV_ABS, ABS_MT_PRESSURE, s->p);
- input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, s->w);
- input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, s->h);
+ input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
+ input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, minor);
}
s->seen_in_this_frame = false;
@@ -341,7 +410,7 @@
struct mt_device *td = hid_get_drvdata(hid);
__s32 quirks = td->mtclass->quirks;
- if (hid->claimed & HID_CLAIMED_INPUT) {
+ if (hid->claimed & HID_CLAIMED_INPUT && td->slots) {
switch (usage->hid) {
case HID_DG_INRANGE:
if (quirks & MT_QUIRK_VALID_IS_INRANGE)
@@ -390,8 +459,6 @@
if (usage->hid == td->last_slot_field) {
mt_complete_slot(td);
- if (!td->last_field_index)
- mt_emit_event(td, field->hidinput->input);
}
if (field->index == td->last_field_index
@@ -442,9 +509,7 @@
*/
hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC;
- td = kzalloc(sizeof(struct mt_device) +
- mtclass->maxcontacts * sizeof(struct mt_slot),
- GFP_KERNEL);
+ td = kzalloc(sizeof(struct mt_device), GFP_KERNEL);
if (!td) {
dev_err(&hdev->dev, "cannot allocate multitouch data\n");
return -ENOMEM;
@@ -461,6 +526,18 @@
if (ret)
goto fail;
+ if (!td->maxcontacts)
+ td->maxcontacts = MT_DEFAULT_MAXCONTACT;
+
+ td->slots = kzalloc(td->maxcontacts * sizeof(struct mt_slot),
+ GFP_KERNEL);
+ if (!td->slots) {
+ dev_err(&hdev->dev, "cannot allocate multitouch slots\n");
+ hid_hw_stop(hdev);
+ ret = -ENOMEM;
+ goto fail;
+ }
+
mt_set_input_mode(hdev);
return 0;
@@ -482,36 +559,51 @@
{
struct mt_device *td = hid_get_drvdata(hdev);
hid_hw_stop(hdev);
+ kfree(td->slots);
kfree(td);
hid_set_drvdata(hdev, NULL);
}
static const struct hid_device_id mt_devices[] = {
+ /* 3M panels */
+ { .driver_data = MT_CLS_3M,
+ HID_USB_DEVICE(USB_VENDOR_ID_3M,
+ USB_DEVICE_ID_3M1968) },
+ { .driver_data = MT_CLS_3M,
+ HID_USB_DEVICE(USB_VENDOR_ID_3M,
+ USB_DEVICE_ID_3M2256) },
+
+ /* ActionStar panels */
+ { .driver_data = MT_CLS_DEFAULT,
+ HID_USB_DEVICE(USB_VENDOR_ID_ACTIONSTAR,
+ USB_DEVICE_ID_ACTIONSTAR_1011) },
+
+ /* Cando panels */
+ { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER,
+ HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
+ USB_DEVICE_ID_CANDO_MULTI_TOUCH) },
+ { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER,
+ HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
+ USB_DEVICE_ID_CANDO_MULTI_TOUCH_10_1) },
+ { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER,
+ HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
+ USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) },
+ { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER,
+ HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
+ USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) },
+
+ /* CVTouch panels */
+ { .driver_data = MT_CLS_DEFAULT,
+ HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH,
+ USB_DEVICE_ID_CVTOUCH_SCREEN) },
+
/* Cypress panel */
{ .driver_data = MT_CLS_CYPRESS,
HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS,
USB_DEVICE_ID_CYPRESS_TRUETOUCH) },
- /* GeneralTouch panel */
- { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER,
- HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH,
- USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) },
-
- /* IRTOUCH panels */
- { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID,
- HID_USB_DEVICE(USB_VENDOR_ID_IRTOUCHSYSTEMS,
- USB_DEVICE_ID_IRTOUCH_INFRARED_USB) },
-
- /* PixCir-based panels */
- { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID,
- HID_USB_DEVICE(USB_VENDOR_ID_HANVON,
- USB_DEVICE_ID_HANVON_MULTITOUCH) },
- { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID,
- HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
- USB_DEVICE_ID_CANDO_PIXCIR_MULTI_TOUCH) },
-
- /* Resistive eGalax devices */
+ /* eGalax devices (resistive) */
{ .driver_data = MT_CLS_EGALAX,
HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
@@ -519,7 +611,7 @@
HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH3) },
- /* Capacitive eGalax devices */
+ /* eGalax devices (capacitive) */
{ .driver_data = MT_CLS_EGALAX,
HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) },
@@ -530,6 +622,84 @@
HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH4) },
+ /* Elo TouchSystems IntelliTouch Plus panel */
+ { .driver_data = MT_CLS_DUAL_NSMU_CONTACTID,
+ HID_USB_DEVICE(USB_VENDOR_ID_ELO,
+ USB_DEVICE_ID_ELO_TS2515) },
+
+ /* GeneralTouch panel */
+ { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER,
+ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH,
+ USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) },
+
+ /* GoodTouch panels */
+ { .driver_data = MT_CLS_DEFAULT,
+ HID_USB_DEVICE(USB_VENDOR_ID_GOODTOUCH,
+ USB_DEVICE_ID_GOODTOUCH_000f) },
+
+ /* Ilitek dual touch panel */
+ { .driver_data = MT_CLS_DEFAULT,
+ HID_USB_DEVICE(USB_VENDOR_ID_ILITEK,
+ USB_DEVICE_ID_ILITEK_MULTITOUCH) },
+
+ /* IRTOUCH panels */
+ { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID,
+ HID_USB_DEVICE(USB_VENDOR_ID_IRTOUCHSYSTEMS,
+ USB_DEVICE_ID_IRTOUCH_INFRARED_USB) },
+
+ /* Lumio panels */
+ { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
+ HID_USB_DEVICE(USB_VENDOR_ID_LUMIO,
+ USB_DEVICE_ID_CRYSTALTOUCH) },
+
+ /* MosArt panels */
+ { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
+ HID_USB_DEVICE(USB_VENDOR_ID_ASUS,
+ USB_DEVICE_ID_ASUS_T91MT)},
+ { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
+ HID_USB_DEVICE(USB_VENDOR_ID_ASUS,
+ USB_DEVICE_ID_ASUSTEK_MULTITOUCH_YFO) },
+ { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
+ HID_USB_DEVICE(USB_VENDOR_ID_TURBOX,
+ USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART) },
+
+ /* PenMount panels */
+ { .driver_data = MT_CLS_CONFIDENCE,
+ HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT,
+ USB_DEVICE_ID_PENMOUNT_PCI) },
+
+ /* PixCir-based panels */
+ { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID,
+ HID_USB_DEVICE(USB_VENDOR_ID_HANVON,
+ USB_DEVICE_ID_HANVON_MULTITOUCH) },
+ { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID,
+ HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
+ USB_DEVICE_ID_CANDO_PIXCIR_MULTI_TOUCH) },
+
+ /* Stantum panels */
+ { .driver_data = MT_CLS_CONFIDENCE,
+ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM,
+ USB_DEVICE_ID_MTP)},
+ { .driver_data = MT_CLS_CONFIDENCE,
+ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM,
+ USB_DEVICE_ID_MTP_STM)},
+ { .driver_data = MT_CLS_CONFIDENCE,
+ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM,
+ USB_DEVICE_ID_MTP_SITRONIX)},
+
+ /* Touch International panels */
+ { .driver_data = MT_CLS_DEFAULT,
+ HID_USB_DEVICE(USB_VENDOR_ID_TOUCH_INTL,
+ USB_DEVICE_ID_TOUCH_INTL_MULTI_TOUCH) },
+
+ /* Unitec panels */
+ { .driver_data = MT_CLS_DEFAULT,
+ HID_USB_DEVICE(USB_VENDOR_ID_UNITEC,
+ USB_DEVICE_ID_UNITEC_USB_TOUCH_0709) },
+ { .driver_data = MT_CLS_DEFAULT,
+ HID_USB_DEVICE(USB_VENDOR_ID_UNITEC,
+ USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19) },
+
{ }
};
MODULE_DEVICE_TABLE(hid, mt_devices);
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 93819a0..936c911 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -178,6 +178,8 @@
static const struct hid_device_id sony_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER),
.driver_data = SIXAXIS_CONTROLLER_USB },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER),
+ .driver_data = SIXAXIS_CONTROLLER_USB },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER),
.driver_data = SIXAXIS_CONTROLLER_BT },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE),
diff --git a/drivers/hid/hid-stantum.c b/drivers/hid/hid-stantum.c
deleted file mode 100644
index b2be1d1..0000000
--- a/drivers/hid/hid-stantum.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * HID driver for Stantum multitouch panels
- *
- * Copyright (c) 2009 Stephane Chatty <chatty@enac.fr>
- *
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#include <linux/device.h>
-#include <linux/hid.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-
-MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
-MODULE_DESCRIPTION("Stantum HID multitouch panels");
-MODULE_LICENSE("GPL");
-
-#include "hid-ids.h"
-
-struct stantum_data {
- __s32 x, y, z, w, h; /* x, y, pressure, width, height */
- __u16 id; /* touch id */
- bool valid; /* valid finger data, or just placeholder? */
- bool first; /* first finger in the HID packet? */
- bool activity; /* at least one active finger so far? */
-};
-
-static int stantum_input_mapping(struct hid_device *hdev, struct hid_input *hi,
- struct hid_field *field, struct hid_usage *usage,
- unsigned long **bit, int *max)
-{
- switch (usage->hid & HID_USAGE_PAGE) {
-
- case HID_UP_GENDESK:
- switch (usage->hid) {
- case HID_GD_X:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_POSITION_X);
- /* touchscreen emulation */
- input_set_abs_params(hi->input, ABS_X,
- field->logical_minimum,
- field->logical_maximum, 0, 0);
- return 1;
- case HID_GD_Y:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_POSITION_Y);
- /* touchscreen emulation */
- input_set_abs_params(hi->input, ABS_Y,
- field->logical_minimum,
- field->logical_maximum, 0, 0);
- return 1;
- }
- return 0;
-
- case HID_UP_DIGITIZER:
- switch (usage->hid) {
- case HID_DG_INRANGE:
- case HID_DG_CONFIDENCE:
- case HID_DG_INPUTMODE:
- case HID_DG_DEVICEINDEX:
- case HID_DG_CONTACTCOUNT:
- case HID_DG_CONTACTMAX:
- return -1;
-
- case HID_DG_TIPSWITCH:
- /* touchscreen emulation */
- hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
- return 1;
-
- case HID_DG_WIDTH:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_TOUCH_MAJOR);
- return 1;
- case HID_DG_HEIGHT:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_TOUCH_MINOR);
- input_set_abs_params(hi->input, ABS_MT_ORIENTATION,
- 1, 1, 0, 0);
- return 1;
- case HID_DG_TIPPRESSURE:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_PRESSURE);
- return 1;
-
- case HID_DG_CONTACTID:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_TRACKING_ID);
- return 1;
-
- }
- return 0;
-
- case 0xff000000:
- /* no input-oriented meaning */
- return -1;
- }
-
- return 0;
-}
-
-static int stantum_input_mapped(struct hid_device *hdev, struct hid_input *hi,
- struct hid_field *field, struct hid_usage *usage,
- unsigned long **bit, int *max)
-{
- if (usage->type == EV_KEY || usage->type == EV_ABS)
- clear_bit(usage->code, *bit);
-
- return 0;
-}
-
-/*
- * this function is called when a whole finger has been parsed,
- * so that it can decide what to send to the input layer.
- */
-static void stantum_filter_event(struct stantum_data *sd,
- struct input_dev *input)
-{
- bool wide;
-
- if (!sd->valid) {
- /*
- * touchscreen emulation: if the first finger is not valid and
- * there previously was finger activity, this is a release
- */
- if (sd->first && sd->activity) {
- input_event(input, EV_KEY, BTN_TOUCH, 0);
- sd->activity = false;
- }
- return;
- }
-
- input_event(input, EV_ABS, ABS_MT_TRACKING_ID, sd->id);
- input_event(input, EV_ABS, ABS_MT_POSITION_X, sd->x);
- input_event(input, EV_ABS, ABS_MT_POSITION_Y, sd->y);
-
- wide = (sd->w > sd->h);
- input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide);
- input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, wide ? sd->w : sd->h);
- input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, wide ? sd->h : sd->w);
-
- input_event(input, EV_ABS, ABS_MT_PRESSURE, sd->z);
-
- input_mt_sync(input);
- sd->valid = false;
-
- /* touchscreen emulation */
- if (sd->first) {
- if (!sd->activity) {
- input_event(input, EV_KEY, BTN_TOUCH, 1);
- sd->activity = true;
- }
- input_event(input, EV_ABS, ABS_X, sd->x);
- input_event(input, EV_ABS, ABS_Y, sd->y);
- }
- sd->first = false;
-}
-
-
-static int stantum_event(struct hid_device *hid, struct hid_field *field,
- struct hid_usage *usage, __s32 value)
-{
- struct stantum_data *sd = hid_get_drvdata(hid);
-
- if (hid->claimed & HID_CLAIMED_INPUT) {
- struct input_dev *input = field->hidinput->input;
-
- switch (usage->hid) {
- case HID_DG_INRANGE:
- /* this is the last field in a finger */
- stantum_filter_event(sd, input);
- break;
- case HID_DG_WIDTH:
- sd->w = value;
- break;
- case HID_DG_HEIGHT:
- sd->h = value;
- break;
- case HID_GD_X:
- sd->x = value;
- break;
- case HID_GD_Y:
- sd->y = value;
- break;
- case HID_DG_TIPPRESSURE:
- sd->z = value;
- break;
- case HID_DG_CONTACTID:
- sd->id = value;
- break;
- case HID_DG_CONFIDENCE:
- sd->valid = !!value;
- break;
- case 0xff000002:
- /* this comes only before the first finger */
- sd->first = true;
- break;
-
- default:
- /* ignore the others */
- return 1;
- }
- }
-
- /* we have handled the hidinput part, now remains hiddev */
- if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
- hid->hiddev_hid_event(hid, field, usage, value);
-
- return 1;
-}
-
-static int stantum_probe(struct hid_device *hdev,
- const struct hid_device_id *id)
-{
- int ret;
- struct stantum_data *sd;
-
- sd = kmalloc(sizeof(struct stantum_data), GFP_KERNEL);
- if (!sd) {
- hid_err(hdev, "cannot allocate Stantum data\n");
- return -ENOMEM;
- }
- sd->valid = false;
- sd->first = false;
- sd->activity = false;
- hid_set_drvdata(hdev, sd);
-
- ret = hid_parse(hdev);
- if (!ret)
- ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
-
- if (ret)
- kfree(sd);
-
- return ret;
-}
-
-static void stantum_remove(struct hid_device *hdev)
-{
- hid_hw_stop(hdev);
- kfree(hid_get_drvdata(hdev));
- hid_set_drvdata(hdev, NULL);
-}
-
-static const struct hid_device_id stantum_devices[] = {
- { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) },
- { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_STM, USB_DEVICE_ID_MTP_STM) },
- { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_SITRONIX, USB_DEVICE_ID_MTP_SITRONIX) },
- { }
-};
-MODULE_DEVICE_TABLE(hid, stantum_devices);
-
-static const struct hid_usage_id stantum_grabbed_usages[] = {
- { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
- { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
-};
-
-static struct hid_driver stantum_driver = {
- .name = "stantum",
- .id_table = stantum_devices,
- .probe = stantum_probe,
- .remove = stantum_remove,
- .input_mapping = stantum_input_mapping,
- .input_mapped = stantum_input_mapped,
- .usage_table = stantum_grabbed_usages,
- .event = stantum_event,
-};
-
-static int __init stantum_init(void)
-{
- return hid_register_driver(&stantum_driver);
-}
-
-static void __exit stantum_exit(void)
-{
- hid_unregister_driver(&stantum_driver);
-}
-
-module_init(stantum_init);
-module_exit(stantum_exit);
-
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index a8426f1..0e30b14 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -68,6 +68,8 @@
{ USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_1, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_2, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U, HID_QUIRK_MULTI_INPUT },
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index f4c67a5..ff3c644 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -373,8 +373,10 @@
/* let O_NONBLOCK tasks run */
mutex_unlock(&list->thread_lock);
schedule();
- if (mutex_lock_interruptible(&list->thread_lock))
+ if (mutex_lock_interruptible(&list->thread_lock)) {
+ finish_wait(&list->hiddev->wait, &wait);
return -EINTR;
+ }
set_current_state(TASK_INTERRUPTIBLE);
}
finish_wait(&list->hiddev->wait, &wait);
diff --git a/samples/Kconfig b/samples/Kconfig
index 41063e7..96a7572 100644
--- a/samples/Kconfig
+++ b/samples/Kconfig
@@ -61,4 +61,10 @@
Build an example of how to dynamically add the hello
command to the kdb shell.
+config SAMPLE_HIDRAW
+ bool "Build simple hidraw example"
+ depends on HIDRAW && HEADERS_CHECK
+ help
+ Build an example of how to use hidraw from userspace.
+
endif # SAMPLES
diff --git a/samples/Makefile b/samples/Makefile
index f26c095..6280817 100644
--- a/samples/Makefile
+++ b/samples/Makefile
@@ -1,4 +1,4 @@
# Makefile for Linux samples code
obj-$(CONFIG_SAMPLES) += kobject/ kprobes/ tracepoints/ trace_events/ \
- hw_breakpoint/ kfifo/ kdb/
+ hw_breakpoint/ kfifo/ kdb/ hidraw/
diff --git a/samples/hidraw/Makefile b/samples/hidraw/Makefile
new file mode 100644
index 0000000..382eeae
--- /dev/null
+++ b/samples/hidraw/Makefile
@@ -0,0 +1,10 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := hid-example
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_hid-example.o += -I$(objtree)/usr/include
diff --git a/samples/hidraw/hid-example.c b/samples/hidraw/hid-example.c
new file mode 100644
index 0000000..816e2dc
--- /dev/null
+++ b/samples/hidraw/hid-example.c
@@ -0,0 +1,178 @@
+/*
+ * Hidraw Userspace Example
+ *
+ * Copyright (c) 2010 Alan Ott <alan@signal11.us>
+ * Copyright (c) 2010 Signal 11 Software
+ *
+ * The code may be used by anyone for any purpose,
+ * and can serve as a starting point for developing
+ * applications using hidraw.
+ */
+
+/* Linux */
+#include <linux/types.h>
+#include <linux/input.h>
+#include <linux/hidraw.h>
+
+/*
+ * Ugly hack to work around failing compilation on systems that don't
+ * yet populate new version of hidraw.h to userspace.
+ *
+ * If you need this, please have your distro update the kernel headers.
+ */
+#ifndef HIDIOCSFEATURE
+#define HIDIOCSFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
+#define HIDIOCGFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len)
+#endif
+
+/* Unix */
+#include <sys/ioctl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+/* C */
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <errno.h>
+
+const char *bus_str(int bus);
+
+int main(int argc, char **argv)
+{
+ int fd;
+ int i, res, desc_size = 0;
+ char buf[256];
+ struct hidraw_report_descriptor rpt_desc;
+ struct hidraw_devinfo info;
+
+ /* Open the Device with non-blocking reads. In real life,
+ don't use a hard coded path; use libudev instead. */
+ fd = open("/dev/hidraw0", O_RDWR|O_NONBLOCK);
+
+ if (fd < 0) {
+ perror("Unable to open device");
+ return 1;
+ }
+
+ memset(&rpt_desc, 0x0, sizeof(rpt_desc));
+ memset(&info, 0x0, sizeof(info));
+ memset(buf, 0x0, sizeof(buf));
+
+ /* Get Report Descriptor Size */
+ res = ioctl(fd, HIDIOCGRDESCSIZE, &desc_size);
+ if (res < 0)
+ perror("HIDIOCGRDESCSIZE");
+ else
+ printf("Report Descriptor Size: %d\n", desc_size);
+
+ /* Get Report Descriptor */
+ rpt_desc.size = desc_size;
+ res = ioctl(fd, HIDIOCGRDESC, &rpt_desc);
+ if (res < 0) {
+ perror("HIDIOCGRDESC");
+ } else {
+ printf("Report Descriptor:\n");
+ for (i = 0; i < rpt_desc.size; i++)
+ printf("%hhx ", rpt_desc.value[i]);
+ puts("\n");
+ }
+
+ /* Get Raw Name */
+ res = ioctl(fd, HIDIOCGRAWNAME(256), buf);
+ if (res < 0)
+ perror("HIDIOCGRAWNAME");
+ else
+ printf("Raw Name: %s\n", buf);
+
+ /* Get Physical Location */
+ res = ioctl(fd, HIDIOCGRAWPHYS(256), buf);
+ if (res < 0)
+ perror("HIDIOCGRAWPHYS");
+ else
+ printf("Raw Phys: %s\n", buf);
+
+ /* Get Raw Info */
+ res = ioctl(fd, HIDIOCGRAWINFO, &info);
+ if (res < 0) {
+ perror("HIDIOCGRAWINFO");
+ } else {
+ printf("Raw Info:\n");
+ printf("\tbustype: %d (%s)\n",
+ info.bustype, bus_str(info.bustype));
+ printf("\tvendor: 0x%04hx\n", info.vendor);
+ printf("\tproduct: 0x%04hx\n", info.product);
+ }
+
+ /* Set Feature */
+ buf[0] = 0x9; /* Report Number */
+ buf[1] = 0xff;
+ buf[2] = 0xff;
+ buf[3] = 0xff;
+ res = ioctl(fd, HIDIOCSFEATURE(4), buf);
+ if (res < 0)
+ perror("HIDIOCSFEATURE");
+ else
+ printf("ioctl HIDIOCGFEATURE returned: %d\n", res);
+
+ /* Get Feature */
+ buf[0] = 0x9; /* Report Number */
+ res = ioctl(fd, HIDIOCGFEATURE(256), buf);
+ if (res < 0) {
+ perror("HIDIOCGFEATURE");
+ } else {
+ printf("ioctl HIDIOCGFEATURE returned: %d\n", res);
+ printf("Report data (not containing the report number):\n\t");
+ for (i = 0; i < res; i++)
+ printf("%hhx ", buf[i]);
+ puts("\n");
+ }
+
+ /* Send a Report to the Device */
+ buf[0] = 0x1; /* Report Number */
+ buf[1] = 0x77;
+ res = write(fd, buf, 2);
+ if (res < 0) {
+ printf("Error: %d\n", errno);
+ perror("write");
+ } else {
+ printf("write() wrote %d bytes\n", res);
+ }
+
+ /* Get a report from the device */
+ res = read(fd, buf, 16);
+ if (res < 0) {
+ perror("read");
+ } else {
+ printf("read() read %d bytes:\n\t", res);
+ for (i = 0; i < res; i++)
+ printf("%hhx ", buf[i]);
+ puts("\n");
+ }
+ close(fd);
+ return 0;
+}
+
+const char *
+bus_str(int bus)
+{
+ switch (bus) {
+ case BUS_USB:
+ return "USB";
+ break;
+ case BUS_HIL:
+ return "HIL";
+ break;
+ case BUS_BLUETOOTH:
+ return "Bluetooth";
+ break;
+ case BUS_VIRTUAL:
+ return "Virtual";
+ break;
+ default:
+ return "Other";
+ break;
+ }
+}