hwmon: (ad7418) Convert to a new-style i2c driver
The ad7418 driver is only used on embedded platforms where i2c
devices can easily be declared in platform code. Thus a new-style
i2c driver makes perfect sense. This lets us get rid of quirky
detection code (these chips have no identification registers) and
shrinks the binary driver size by 38%.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
diff --git a/drivers/hwmon/ad7418.c b/drivers/hwmon/ad7418.c
index 466b9ee..f97b5b3 100644
--- a/drivers/hwmon/ad7418.c
+++ b/drivers/hwmon/ad7418.c
@@ -23,12 +23,9 @@
#include "lm75.h"
-#define DRV_VERSION "0.3"
+#define DRV_VERSION "0.4"
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x28, I2C_CLIENT_END };
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_3(ad7416, ad7417, ad7418);
+enum chips { ad7416, ad7417, ad7418 };
/* AD7418 registers */
#define AD7418_REG_TEMP_IN 0x00
@@ -46,7 +43,6 @@
AD7418_REG_TEMP_OS };
struct ad7418_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct attribute_group attrs;
enum chips type;
@@ -58,16 +54,25 @@
u16 in[4];
};
-static int ad7418_attach_adapter(struct i2c_adapter *adapter);
-static int ad7418_detect(struct i2c_adapter *adapter, int address, int kind);
-static int ad7418_detach_client(struct i2c_client *client);
+static int ad7418_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int ad7418_remove(struct i2c_client *client);
+
+static const struct i2c_device_id ad7418_id[] = {
+ { "ad7416", ad7416 },
+ { "ad7417", ad7417 },
+ { "ad7418", ad7418 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ad7418_id);
static struct i2c_driver ad7418_driver = {
.driver = {
.name = "ad7418",
},
- .attach_adapter = ad7418_attach_adapter,
- .detach_client = ad7418_detach_client,
+ .probe = ad7418_probe,
+ .remove = ad7418_remove,
+ .id_table = ad7418_id,
};
/* All registers are word-sized, except for the configuration registers.
@@ -192,13 +197,6 @@
static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_adc, NULL, 2);
static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_adc, NULL, 3);
-static int ad7418_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, ad7418_detect);
-}
-
static struct attribute *ad7416_attributes[] = {
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
@@ -225,98 +223,46 @@
NULL
};
-static int ad7418_detect(struct i2c_adapter *adapter, int address, int kind)
+static int ad7418_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
struct ad7418_data *data;
- int err = 0;
+ int err;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
- I2C_FUNC_SMBUS_WORD_DATA))
+ I2C_FUNC_SMBUS_WORD_DATA)) {
+ err = -EOPNOTSUPP;
goto exit;
+ }
if (!(data = kzalloc(sizeof(struct ad7418_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- client = &data->client;
- client->addr = address;
- client->adapter = adapter;
- client->driver = &ad7418_driver;
-
i2c_set_clientdata(client, data);
mutex_init(&data->lock);
-
- /* AD7418 has a curious behaviour on registers 6 and 7. They
- * both always read 0xC071 and are not documented on the datasheet.
- * We use them to detect the chip.
- */
- if (kind <= 0) {
- int reg, reg6, reg7;
-
- /* the AD7416 lies within this address range, but I have
- * no means to check.
- */
- if (address >= 0x48 && address <= 0x4f) {
- /* XXX add tests for AD7416 here */
- /* data->type = ad7416; */
- }
- /* here we might have AD7417 or AD7418 */
- else if (address >= 0x28 && address <= 0x2f) {
- reg6 = i2c_smbus_read_word_data(client, 0x06);
- reg7 = i2c_smbus_read_word_data(client, 0x07);
-
- if (address == 0x28 && reg6 == 0xC071 && reg7 == 0xC071)
- data->type = ad7418;
-
- /* XXX add tests for AD7417 here */
-
-
- /* both AD7417 and AD7418 have bits 0-5 of
- * the CONF2 register at 0
- */
- reg = i2c_smbus_read_byte_data(client,
- AD7418_REG_CONF2);
- if (reg & 0x3F)
- data->type = any_chip; /* detection failed */
- }
- } else {
- dev_dbg(&adapter->dev, "detection forced\n");
- }
-
- if (kind > 0)
- data->type = kind;
- else if (kind < 0 && data->type == any_chip) {
- err = -ENODEV;
- goto exit_free;
- }
+ data->type = id->driver_data;
switch (data->type) {
- case any_chip:
case ad7416:
data->adc_max = 0;
data->attrs.attrs = ad7416_attributes;
- strlcpy(client->name, "ad7416", I2C_NAME_SIZE);
break;
case ad7417:
data->adc_max = 4;
data->attrs.attrs = ad7417_attributes;
- strlcpy(client->name, "ad7417", I2C_NAME_SIZE);
break;
case ad7418:
data->adc_max = 1;
data->attrs.attrs = ad7418_attributes;
- strlcpy(client->name, "ad7418", I2C_NAME_SIZE);
break;
}
- if ((err = i2c_attach_client(client)))
- goto exit_free;
-
dev_info(&client->dev, "%s chip found\n", client->name);
/* Initialize the AD7418 chip */
@@ -324,7 +270,7 @@
/* Register sysfs hooks */
if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs)))
- goto exit_detach;
+ goto exit_free;
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
@@ -336,20 +282,17 @@
exit_remove:
sysfs_remove_group(&client->dev.kobj, &data->attrs);
-exit_detach:
- i2c_detach_client(client);
exit_free:
kfree(data);
exit:
return err;
}
-static int ad7418_detach_client(struct i2c_client *client)
+static int ad7418_remove(struct i2c_client *client)
{
struct ad7418_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &data->attrs);
- i2c_detach_client(client);
kfree(data);
return 0;
}