ARM: kirkwood: convert the mv88f6281gtw_ge board to DT
This commit converts the mv88f6281gtw_ge Kirkwood board to use a
Device Tree representation, except for the Ethernet devices and the
DSA switch. Even though the mv643xx_eth driver has a DT binding,
converting this board to use it is for now left on the side because it
doesn't use a simple PHY, but a DSA switch instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
new file mode 100644
index 0000000..13e3576
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -0,0 +1,125 @@
+/*
+ * Marvell 88F6281 GTW GE Board
+ *
+ * Lennert Buytenhek <buytenh@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the 6281
+ * and 6282 variants of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
+
+/ {
+ model = "Marvell 88F6281 GTW GE Board";
+ compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MB */
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+
+ ocp@f1000000 {
+ pinctrl@10000 {
+ pmx_usb_led: pmx-usb-led {
+ marvell,pins = "mpp12";
+ marvell,function = "gpo";
+ };
+
+ pmx_leds: pmx-leds {
+ marvell,pins = "mpp20", "mpp21";
+ marvell,function = "gpio";
+ };
+
+ pmx_keys: pmx-keys {
+ marvell,pins = "mpp46", "mpp47";
+ marvell,function = "gpio";
+ };
+ };
+
+ spi@10600 {
+ pinctrl-0 = <&pmx_spi>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l12805d";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ mode = <0>;
+ };
+ };
+
+ serial@12000 {
+ pinctrl-0 = <&pmx_uart0>;
+ pinctrl-names = "default";
+ clock-frequency = <200000000>;
+ status = "ok";
+ };
+
+ ehci@50000 {
+ status = "okay";
+ };
+
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_leds &pmx_usb_led>;
+ pinctrl-names = "default";
+
+ green-status {
+ label = "gtw:green:Status";
+ gpios = <&gpio0 20 0>;
+ };
+
+ red-status {
+ label = "gtw:red:Status";
+ gpios = <&gpio0 21 0>;
+ };
+
+ green-usb {
+ label = "gtw:green:USB";
+ gpios = <&gpio0 12 0>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_keys>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "SWR Button";
+ linux,code = <0x198>; /* KEY_RESTART */
+ gpios = <&gpio1 15 1>;
+ };
+ button@2 {
+ label = "WPS Button";
+ linux,code = <0x211>; /* KEY_WPS_BUTTON */
+ gpios = <&gpio1 14 1>;
+ };
+ };
+};