| /* |
| * linux/arch/arm/plat-pxa/gpio.c |
| * |
| * Generic PXA GPIO handling |
| * |
| * Author: Nicolas Pitre |
| * Created: Jun 15, 2001 |
| * Copyright: MontaVista Software Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/module.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/gpio.h> |
| #include <linux/gpio-pxa.h> |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/irqdomain.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/syscore_ops.h> |
| #include <linux/slab.h> |
| |
| #include <asm/mach/irq.h> |
| |
| #include <mach/irqs.h> |
| |
| /* |
| * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with |
| * one set of registers. The register offsets are organized below: |
| * |
| * GPLR GPDR GPSR GPCR GRER GFER GEDR |
| * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 |
| * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C |
| * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 |
| * |
| * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 |
| * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C |
| * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 |
| * |
| * NOTE: |
| * BANK 3 is only available on PXA27x and later processors. |
| * BANK 4 and 5 are only available on PXA935 |
| */ |
| |
| #define GPLR_OFFSET 0x00 |
| #define GPDR_OFFSET 0x0C |
| #define GPSR_OFFSET 0x18 |
| #define GPCR_OFFSET 0x24 |
| #define GRER_OFFSET 0x30 |
| #define GFER_OFFSET 0x3C |
| #define GEDR_OFFSET 0x48 |
| #define GAFR_OFFSET 0x54 |
| #define ED_MASK_OFFSET 0x9C /* GPIO edge detection for AP side */ |
| |
| #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) |
| |
| int pxa_last_gpio; |
| static int irq_base; |
| |
| #ifdef CONFIG_OF |
| static struct irq_domain *domain; |
| static struct device_node *pxa_gpio_of_node; |
| #endif |
| |
| struct pxa_gpio_chip { |
| struct gpio_chip chip; |
| void __iomem *regbase; |
| char label[10]; |
| |
| unsigned long irq_mask; |
| unsigned long irq_edge_rise; |
| unsigned long irq_edge_fall; |
| int (*set_wake)(unsigned int gpio, unsigned int on); |
| |
| #ifdef CONFIG_PM |
| unsigned long saved_gplr; |
| unsigned long saved_gpdr; |
| unsigned long saved_grer; |
| unsigned long saved_gfer; |
| #endif |
| }; |
| |
| enum { |
| PXA25X_GPIO = 0, |
| PXA26X_GPIO, |
| PXA27X_GPIO, |
| PXA3XX_GPIO, |
| PXA93X_GPIO, |
| MMP_GPIO = 0x10, |
| }; |
| |
| static DEFINE_SPINLOCK(gpio_lock); |
| static struct pxa_gpio_chip *pxa_gpio_chips; |
| static int gpio_type; |
| static void __iomem *gpio_reg_base; |
| |
| #define for_each_gpio_chip(i, c) \ |
| for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++) |
| |
| static inline void __iomem *gpio_chip_base(struct gpio_chip *c) |
| { |
| return container_of(c, struct pxa_gpio_chip, chip)->regbase; |
| } |
| |
| static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio) |
| { |
| return &pxa_gpio_chips[gpio_to_bank(gpio)]; |
| } |
| |
| static inline int gpio_is_pxa_type(int type) |
| { |
| return (type & MMP_GPIO) == 0; |
| } |
| |
| static inline int gpio_is_mmp_type(int type) |
| { |
| return (type & MMP_GPIO) != 0; |
| } |
| |
| /* GPIO86/87/88/89 on PXA26x have their direction bits in PXA_GPDR(2 inverted, |
| * as well as their Alternate Function value being '1' for GPIO in GAFRx. |
| */ |
| static inline int __gpio_is_inverted(int gpio) |
| { |
| if ((gpio_type == PXA26X_GPIO) && (gpio > 85)) |
| return 1; |
| return 0; |
| } |
| |
| /* |
| * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate |
| * function of a GPIO, and GPDRx cannot be altered once configured. It |
| * is attributed as "occupied" here (I know this terminology isn't |
| * accurate, you are welcome to propose a better one :-) |
| */ |
| static inline int __gpio_is_occupied(unsigned gpio) |
| { |
| struct pxa_gpio_chip *pxachip; |
| void __iomem *base; |
| unsigned long gafr = 0, gpdr = 0; |
| int ret, af = 0, dir = 0; |
| |
| pxachip = gpio_to_pxachip(gpio); |
| base = gpio_chip_base(&pxachip->chip); |
| gpdr = readl_relaxed(base + GPDR_OFFSET); |
| |
| switch (gpio_type) { |
| case PXA25X_GPIO: |
| case PXA26X_GPIO: |
| case PXA27X_GPIO: |
| gafr = readl_relaxed(base + GAFR_OFFSET); |
| af = (gafr >> ((gpio & 0xf) * 2)) & 0x3; |
| dir = gpdr & GPIO_bit(gpio); |
| |
| if (__gpio_is_inverted(gpio)) |
| ret = (af != 1) || (dir == 0); |
| else |
| ret = (af != 0) || (dir != 0); |
| break; |
| default: |
| ret = gpdr & GPIO_bit(gpio); |
| break; |
| } |
| return ret; |
| } |
| |
| static int pxa_gpio_to_irq(struct gpio_chip *chip, unsigned offset) |
| { |
| return chip->base + offset + irq_base; |
| } |
| |
| int pxa_irq_to_gpio(int irq) |
| { |
| return irq - irq_base; |
| } |
| |
| static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset) |
| { |
| void __iomem *base = gpio_chip_base(chip); |
| uint32_t value, mask = 1 << offset; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&gpio_lock, flags); |
| |
| value = readl_relaxed(base + GPDR_OFFSET); |
| if (__gpio_is_inverted(chip->base + offset)) |
| value |= mask; |
| else |
| value &= ~mask; |
| writel_relaxed(value, base + GPDR_OFFSET); |
| |
| spin_unlock_irqrestore(&gpio_lock, flags); |
| return 0; |
| } |
| |
| static int pxa_gpio_direction_output(struct gpio_chip *chip, |
| unsigned offset, int value) |
| { |
| void __iomem *base = gpio_chip_base(chip); |
| uint32_t tmp, mask = 1 << offset; |
| unsigned long flags; |
| |
| writel_relaxed(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET)); |
| |
| spin_lock_irqsave(&gpio_lock, flags); |
| |
| tmp = readl_relaxed(base + GPDR_OFFSET); |
| if (__gpio_is_inverted(chip->base + offset)) |
| tmp &= ~mask; |
| else |
| tmp |= mask; |
| writel_relaxed(tmp, base + GPDR_OFFSET); |
| |
| spin_unlock_irqrestore(&gpio_lock, flags); |
| return 0; |
| } |
| |
| static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| return readl_relaxed(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset); |
| } |
| |
| static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| writel_relaxed(1 << offset, gpio_chip_base(chip) + |
| (value ? GPSR_OFFSET : GPCR_OFFSET)); |
| } |
| |
| #ifdef CONFIG_OF_GPIO |
| static int pxa_gpio_of_xlate(struct gpio_chip *gc, |
| const struct of_phandle_args *gpiospec, |
| u32 *flags) |
| { |
| if (gpiospec->args[0] > pxa_last_gpio) |
| return -EINVAL; |
| |
| if (gc != &pxa_gpio_chips[gpiospec->args[0] / 32].chip) |
| return -EINVAL; |
| |
| if (flags) |
| *flags = gpiospec->args[1]; |
| |
| return gpiospec->args[0] % 32; |
| } |
| #endif |
| |
| static int pxa_init_gpio_chip(int gpio_end, |
| int (*set_wake)(unsigned int, unsigned int)) |
| { |
| int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1; |
| struct pxa_gpio_chip *chips; |
| |
| chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL); |
| if (chips == NULL) { |
| pr_err("%s: failed to allocate GPIO chips\n", __func__); |
| return -ENOMEM; |
| } |
| |
| for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) { |
| struct gpio_chip *c = &chips[i].chip; |
| |
| sprintf(chips[i].label, "gpio-%d", i); |
| chips[i].regbase = gpio_reg_base + BANK_OFF(i); |
| chips[i].set_wake = set_wake; |
| |
| c->base = gpio; |
| c->label = chips[i].label; |
| |
| c->direction_input = pxa_gpio_direction_input; |
| c->direction_output = pxa_gpio_direction_output; |
| c->get = pxa_gpio_get; |
| c->set = pxa_gpio_set; |
| c->to_irq = pxa_gpio_to_irq; |
| #ifdef CONFIG_OF_GPIO |
| c->of_node = pxa_gpio_of_node; |
| c->of_xlate = pxa_gpio_of_xlate; |
| c->of_gpio_n_cells = 2; |
| #endif |
| |
| /* number of GPIOs on last bank may be less than 32 */ |
| c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32; |
| gpiochip_add(c); |
| } |
| pxa_gpio_chips = chips; |
| return 0; |
| } |
| |
| /* Update only those GRERx and GFERx edge detection register bits if those |
| * bits are set in c->irq_mask |
| */ |
| static inline void update_edge_detect(struct pxa_gpio_chip *c) |
| { |
| uint32_t grer, gfer; |
| |
| grer = readl_relaxed(c->regbase + GRER_OFFSET) & ~c->irq_mask; |
| gfer = readl_relaxed(c->regbase + GFER_OFFSET) & ~c->irq_mask; |
| grer |= c->irq_edge_rise & c->irq_mask; |
| gfer |= c->irq_edge_fall & c->irq_mask; |
| writel_relaxed(grer, c->regbase + GRER_OFFSET); |
| writel_relaxed(gfer, c->regbase + GFER_OFFSET); |
| } |
| |
| static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type) |
| { |
| struct pxa_gpio_chip *c; |
| int gpio = pxa_irq_to_gpio(d->irq); |
| unsigned long gpdr, mask = GPIO_bit(gpio); |
| |
| c = gpio_to_pxachip(gpio); |
| |
| if (type == IRQ_TYPE_PROBE) { |
| /* Don't mess with enabled GPIOs using preconfigured edges or |
| * GPIOs set to alternate function or to output during probe |
| */ |
| if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio)) |
| return 0; |
| |
| if (__gpio_is_occupied(gpio)) |
| return 0; |
| |
| type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; |
| } |
| |
| gpdr = readl_relaxed(c->regbase + GPDR_OFFSET); |
| |
| if (__gpio_is_inverted(gpio)) |
| writel_relaxed(gpdr | mask, c->regbase + GPDR_OFFSET); |
| else |
| writel_relaxed(gpdr & ~mask, c->regbase + GPDR_OFFSET); |
| |
| if (type & IRQ_TYPE_EDGE_RISING) |
| c->irq_edge_rise |= mask; |
| else |
| c->irq_edge_rise &= ~mask; |
| |
| if (type & IRQ_TYPE_EDGE_FALLING) |
| c->irq_edge_fall |= mask; |
| else |
| c->irq_edge_fall &= ~mask; |
| |
| update_edge_detect(c); |
| |
| pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, d->irq, gpio, |
| ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""), |
| ((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : "")); |
| return 0; |
| } |
| |
| static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) |
| { |
| struct pxa_gpio_chip *c; |
| int loop, gpio, gpio_base, n; |
| unsigned long gedr; |
| struct irq_chip *chip = irq_desc_get_chip(desc); |
| |
| chained_irq_enter(chip, desc); |
| |
| do { |
| loop = 0; |
| for_each_gpio_chip(gpio, c) { |
| gpio_base = c->chip.base; |
| |
| gedr = readl_relaxed(c->regbase + GEDR_OFFSET); |
| gedr = gedr & c->irq_mask; |
| writel_relaxed(gedr, c->regbase + GEDR_OFFSET); |
| |
| for_each_set_bit(n, &gedr, BITS_PER_LONG) { |
| loop = 1; |
| |
| generic_handle_irq(gpio_to_irq(gpio_base + n)); |
| } |
| } |
| } while (loop); |
| |
| chained_irq_exit(chip, desc); |
| } |
| |
| static void pxa_ack_muxed_gpio(struct irq_data *d) |
| { |
| int gpio = pxa_irq_to_gpio(d->irq); |
| struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); |
| |
| writel_relaxed(GPIO_bit(gpio), c->regbase + GEDR_OFFSET); |
| } |
| |
| static void pxa_mask_muxed_gpio(struct irq_data *d) |
| { |
| int gpio = pxa_irq_to_gpio(d->irq); |
| struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); |
| uint32_t grer, gfer; |
| |
| c->irq_mask &= ~GPIO_bit(gpio); |
| |
| grer = readl_relaxed(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio); |
| gfer = readl_relaxed(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio); |
| writel_relaxed(grer, c->regbase + GRER_OFFSET); |
| writel_relaxed(gfer, c->regbase + GFER_OFFSET); |
| } |
| |
| static int pxa_gpio_set_wake(struct irq_data *d, unsigned int on) |
| { |
| int gpio = pxa_irq_to_gpio(d->irq); |
| struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); |
| |
| if (c->set_wake) |
| return c->set_wake(gpio, on); |
| else |
| return 0; |
| } |
| |
| static void pxa_unmask_muxed_gpio(struct irq_data *d) |
| { |
| int gpio = pxa_irq_to_gpio(d->irq); |
| struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); |
| |
| c->irq_mask |= GPIO_bit(gpio); |
| update_edge_detect(c); |
| } |
| |
| static struct irq_chip pxa_muxed_gpio_chip = { |
| .name = "GPIO", |
| .irq_ack = pxa_ack_muxed_gpio, |
| .irq_mask = pxa_mask_muxed_gpio, |
| .irq_unmask = pxa_unmask_muxed_gpio, |
| .irq_set_type = pxa_gpio_irq_type, |
| .irq_set_wake = pxa_gpio_set_wake, |
| }; |
| |
| static int pxa_gpio_nums(void) |
| { |
| int count = 0; |
| |
| #ifdef CONFIG_ARCH_PXA |
| if (cpu_is_pxa25x()) { |
| #ifdef CONFIG_CPU_PXA26x |
| count = 89; |
| gpio_type = PXA26X_GPIO; |
| #elif defined(CONFIG_PXA25x) |
| count = 84; |
| gpio_type = PXA26X_GPIO; |
| #endif /* CONFIG_CPU_PXA26x */ |
| } else if (cpu_is_pxa27x()) { |
| count = 120; |
| gpio_type = PXA27X_GPIO; |
| } else if (cpu_is_pxa93x() || cpu_is_pxa95x()) { |
| count = 191; |
| gpio_type = PXA93X_GPIO; |
| } else if (cpu_is_pxa3xx()) { |
| count = 127; |
| gpio_type = PXA3XX_GPIO; |
| } |
| #endif /* CONFIG_ARCH_PXA */ |
| |
| #ifdef CONFIG_ARCH_MMP |
| if (cpu_is_pxa168() || cpu_is_pxa910()) { |
| count = 127; |
| gpio_type = MMP_GPIO; |
| } else if (cpu_is_mmp2()) { |
| count = 191; |
| gpio_type = MMP_GPIO; |
| } |
| #endif /* CONFIG_ARCH_MMP */ |
| return count; |
| } |
| |
| #ifdef CONFIG_OF |
| static struct of_device_id pxa_gpio_dt_ids[] = { |
| { .compatible = "mrvl,pxa-gpio" }, |
| { .compatible = "mrvl,mmp-gpio", .data = (void *)MMP_GPIO }, |
| {} |
| }; |
| |
| static int pxa_irq_domain_map(struct irq_domain *d, unsigned int irq, |
| irq_hw_number_t hw) |
| { |
| irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip, |
| handle_edge_irq); |
| set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); |
| return 0; |
| } |
| |
| const struct irq_domain_ops pxa_irq_domain_ops = { |
| .map = pxa_irq_domain_map, |
| .xlate = irq_domain_xlate_twocell, |
| }; |
| |
| static int pxa_gpio_probe_dt(struct platform_device *pdev) |
| { |
| int ret, nr_banks, nr_gpios; |
| struct device_node *prev, *next, *np = pdev->dev.of_node; |
| const struct of_device_id *of_id = |
| of_match_device(pxa_gpio_dt_ids, &pdev->dev); |
| |
| if (!of_id) { |
| dev_err(&pdev->dev, "Failed to find gpio controller\n"); |
| return -EFAULT; |
| } |
| gpio_type = (int)of_id->data; |
| |
| next = of_get_next_child(np, NULL); |
| prev = next; |
| if (!next) { |
| dev_err(&pdev->dev, "Failed to find child gpio node\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| for (nr_banks = 1; ; nr_banks++) { |
| next = of_get_next_child(np, prev); |
| if (!next) |
| break; |
| prev = next; |
| } |
| of_node_put(prev); |
| nr_gpios = nr_banks << 5; |
| pxa_last_gpio = nr_gpios - 1; |
| |
| irq_base = irq_alloc_descs(-1, 0, nr_gpios, 0); |
| if (irq_base < 0) { |
| dev_err(&pdev->dev, "Failed to allocate IRQ numbers\n"); |
| goto err; |
| } |
| domain = irq_domain_add_legacy(np, nr_gpios, irq_base, 0, |
| &pxa_irq_domain_ops, NULL); |
| pxa_gpio_of_node = np; |
| return 0; |
| err: |
| iounmap(gpio_reg_base); |
| return ret; |
| } |
| #else |
| #define pxa_gpio_probe_dt(pdev) (-1) |
| #endif |
| |
| static int pxa_gpio_probe(struct platform_device *pdev) |
| { |
| struct pxa_gpio_chip *c; |
| struct resource *res; |
| struct clk *clk; |
| struct pxa_gpio_platform_data *info; |
| int gpio, irq, ret, use_of = 0; |
| int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0; |
| |
| ret = pxa_gpio_probe_dt(pdev); |
| if (ret < 0) { |
| pxa_last_gpio = pxa_gpio_nums(); |
| #ifdef CONFIG_ARCH_PXA |
| if (gpio_is_pxa_type(gpio_type)) |
| irq_base = PXA_GPIO_TO_IRQ(0); |
| #endif |
| #ifdef CONFIG_ARCH_MMP |
| if (gpio_is_mmp_type(gpio_type)) |
| irq_base = MMP_GPIO_TO_IRQ(0); |
| #endif |
| } else { |
| use_of = 1; |
| } |
| |
| if (!pxa_last_gpio) |
| return -EINVAL; |
| |
| irq0 = platform_get_irq_byname(pdev, "gpio0"); |
| irq1 = platform_get_irq_byname(pdev, "gpio1"); |
| irq_mux = platform_get_irq_byname(pdev, "gpio_mux"); |
| if ((irq0 > 0 && irq1 <= 0) || (irq0 <= 0 && irq1 > 0) |
| || (irq_mux <= 0)) |
| return -EINVAL; |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) |
| return -EINVAL; |
| gpio_reg_base = ioremap(res->start, resource_size(res)); |
| if (!gpio_reg_base) |
| return -EINVAL; |
| |
| if (irq0 > 0) |
| gpio_offset = 2; |
| |
| clk = clk_get(&pdev->dev, NULL); |
| if (IS_ERR(clk)) { |
| dev_err(&pdev->dev, "Error %ld to get gpio clock\n", |
| PTR_ERR(clk)); |
| iounmap(gpio_reg_base); |
| return PTR_ERR(clk); |
| } |
| ret = clk_prepare_enable(clk); |
| if (ret) { |
| clk_put(clk); |
| iounmap(gpio_reg_base); |
| return ret; |
| } |
| |
| /* Initialize GPIO chips */ |
| info = dev_get_platdata(&pdev->dev); |
| pxa_init_gpio_chip(pxa_last_gpio, info ? info->gpio_set_wake : NULL); |
| |
| /* clear all GPIO edge detects */ |
| for_each_gpio_chip(gpio, c) { |
| writel_relaxed(0, c->regbase + GFER_OFFSET); |
| writel_relaxed(0, c->regbase + GRER_OFFSET); |
| writel_relaxed(~0,c->regbase + GEDR_OFFSET); |
| /* unmask GPIO edge detect for AP side */ |
| if (gpio_is_mmp_type(gpio_type)) |
| writel_relaxed(~0, c->regbase + ED_MASK_OFFSET); |
| } |
| |
| if (!use_of) { |
| #ifdef CONFIG_ARCH_PXA |
| irq = gpio_to_irq(0); |
| irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip, |
| handle_edge_irq); |
| set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); |
| irq_set_chained_handler(IRQ_GPIO0, pxa_gpio_demux_handler); |
| |
| irq = gpio_to_irq(1); |
| irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip, |
| handle_edge_irq); |
| set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); |
| irq_set_chained_handler(IRQ_GPIO1, pxa_gpio_demux_handler); |
| #endif |
| |
| for (irq = gpio_to_irq(gpio_offset); |
| irq <= gpio_to_irq(pxa_last_gpio); irq++) { |
| irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip, |
| handle_edge_irq); |
| set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); |
| } |
| } |
| |
| irq_set_chained_handler(irq_mux, pxa_gpio_demux_handler); |
| return 0; |
| } |
| |
| static struct platform_driver pxa_gpio_driver = { |
| .probe = pxa_gpio_probe, |
| .driver = { |
| .name = "pxa-gpio", |
| .of_match_table = of_match_ptr(pxa_gpio_dt_ids), |
| }, |
| }; |
| |
| static int __init pxa_gpio_init(void) |
| { |
| return platform_driver_register(&pxa_gpio_driver); |
| } |
| postcore_initcall(pxa_gpio_init); |
| |
| #ifdef CONFIG_PM |
| static int pxa_gpio_suspend(void) |
| { |
| struct pxa_gpio_chip *c; |
| int gpio; |
| |
| for_each_gpio_chip(gpio, c) { |
| c->saved_gplr = readl_relaxed(c->regbase + GPLR_OFFSET); |
| c->saved_gpdr = readl_relaxed(c->regbase + GPDR_OFFSET); |
| c->saved_grer = readl_relaxed(c->regbase + GRER_OFFSET); |
| c->saved_gfer = readl_relaxed(c->regbase + GFER_OFFSET); |
| |
| /* Clear GPIO transition detect bits */ |
| writel_relaxed(0xffffffff, c->regbase + GEDR_OFFSET); |
| } |
| return 0; |
| } |
| |
| static void pxa_gpio_resume(void) |
| { |
| struct pxa_gpio_chip *c; |
| int gpio; |
| |
| for_each_gpio_chip(gpio, c) { |
| /* restore level with set/clear */ |
| writel_relaxed( c->saved_gplr, c->regbase + GPSR_OFFSET); |
| writel_relaxed(~c->saved_gplr, c->regbase + GPCR_OFFSET); |
| |
| writel_relaxed(c->saved_grer, c->regbase + GRER_OFFSET); |
| writel_relaxed(c->saved_gfer, c->regbase + GFER_OFFSET); |
| writel_relaxed(c->saved_gpdr, c->regbase + GPDR_OFFSET); |
| } |
| } |
| #else |
| #define pxa_gpio_suspend NULL |
| #define pxa_gpio_resume NULL |
| #endif |
| |
| struct syscore_ops pxa_gpio_syscore_ops = { |
| .suspend = pxa_gpio_suspend, |
| .resume = pxa_gpio_resume, |
| }; |
| |
| static int __init pxa_gpio_sysinit(void) |
| { |
| register_syscore_ops(&pxa_gpio_syscore_ops); |
| return 0; |
| } |
| postcore_initcall(pxa_gpio_sysinit); |