[PATCH] zfcp: add rports to enable scsi_add_device to work again
This patch fixes a severe problem with 2.6.13-rc7.
Due to recent SCSI changes it is not possible to add any LUNs to the zfcp
device driver anymore. With registration of remote ports this is fixed.
Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com>
Acked-by: James Bottomley <jejb@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index e17b4d5..6fed4a5 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -1299,13 +1299,10 @@
zfcp_port_enqueue(struct zfcp_adapter *adapter, wwn_t wwpn, u32 status,
u32 d_id)
{
- struct zfcp_port *port, *tmp_port;
+ struct zfcp_port *port;
int check_wwpn;
- scsi_id_t scsi_id;
- int found;
check_wwpn = !(status & ZFCP_STATUS_PORT_NO_WWPN);
-
/*
* check that there is no port with this WWPN already in list
*/
@@ -1368,7 +1365,7 @@
} else {
snprintf(port->sysfs_device.bus_id,
BUS_ID_SIZE, "0x%016llx", wwpn);
- port->sysfs_device.parent = &adapter->ccw_device->dev;
+ port->sysfs_device.parent = &adapter->ccw_device->dev;
}
port->sysfs_device.release = zfcp_sysfs_port_release;
dev_set_drvdata(&port->sysfs_device, port);
@@ -1388,24 +1385,8 @@
zfcp_port_get(port);
- scsi_id = 1;
- found = 0;
write_lock_irq(&zfcp_data.config_lock);
- list_for_each_entry(tmp_port, &adapter->port_list_head, list) {
- if (atomic_test_mask(ZFCP_STATUS_PORT_NO_SCSI_ID,
- &tmp_port->status))
- continue;
- if (tmp_port->scsi_id != scsi_id) {
- found = 1;
- break;
- }
- scsi_id++;
- }
- port->scsi_id = scsi_id;
- if (found)
- list_add_tail(&port->list, &tmp_port->list);
- else
- list_add_tail(&port->list, &adapter->port_list_head);
+ list_add_tail(&port->list, &adapter->port_list_head);
atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status);
atomic_set_mask(ZFCP_STATUS_COMMON_RUNNING, &port->status);
if (d_id == ZFCP_DID_DIRECTORY_SERVICE)
@@ -1422,11 +1403,15 @@
void
zfcp_port_dequeue(struct zfcp_port *port)
{
+ struct fc_port *rport;
+
zfcp_port_wait(port);
write_lock_irq(&zfcp_data.config_lock);
list_del(&port->list);
port->adapter->ports--;
write_unlock_irq(&zfcp_data.config_lock);
+ if (port->rport)
+ fc_remote_port_delete(rport);
zfcp_adapter_put(port->adapter);
zfcp_sysfs_port_remove_files(&port->sysfs_device,
atomic_read(&port->status));
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index 0fc4638..3c65aed 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -202,9 +202,19 @@
zfcp_ccw_set_offline(struct ccw_device *ccw_device)
{
struct zfcp_adapter *adapter;
+ struct zfcp_port *port;
+ struct fc_port *rport;
down(&zfcp_data.config_sema);
adapter = dev_get_drvdata(&ccw_device->dev);
+ /* might be racy, but we cannot take config_lock due to the fact that
+ fc_remote_port_delete might sleep */
+ list_for_each_entry(port, &adapter->port_list_head, list)
+ if (port->rport) {
+ rport = port->rport;
+ port->rport = NULL;
+ fc_remote_port_delete(rport);
+ }
zfcp_erp_adapter_shutdown(adapter, 0);
zfcp_erp_wait(adapter);
zfcp_adapter_scsi_unregister(adapter);
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index 4103b5b..455e902 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -906,6 +906,7 @@
*/
struct zfcp_port {
struct device sysfs_device; /* sysfs device */
+ struct fc_rport *rport; /* rport of fc transport class */
struct list_head list; /* list of remote ports */
atomic_t refcount; /* reference count */
wait_queue_head_t remove_wq; /* can be used to wait for
@@ -916,7 +917,6 @@
list */
u32 units; /* # of logical units in list */
atomic_t status; /* status of this remote port */
- scsi_id_t scsi_id; /* own SCSI ID */
wwn_t wwnn; /* WWNN if known */
wwn_t wwpn; /* WWPN */
fc_id_t d_id; /* D_ID */
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 0cf31f7..cb4f612 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -3360,13 +3360,32 @@
if ((result == ZFCP_ERP_SUCCEEDED)
&& (!atomic_test_mask(ZFCP_STATUS_UNIT_TEMPORARY,
&unit->status))
- && (!unit->device))
- scsi_add_device(unit->port->adapter->scsi_host, 0,
- unit->port->scsi_id, unit->scsi_lun);
+ && !unit->device
+ && port->rport)
+ scsi_add_device(port->adapter->scsi_host, 0,
+ port->rport->scsi_target_id,
+ unit->scsi_lun);
zfcp_unit_put(unit);
break;
case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
case ZFCP_ERP_ACTION_REOPEN_PORT:
+ if ((result == ZFCP_ERP_SUCCEEDED)
+ && !atomic_test_mask(ZFCP_STATUS_PORT_NO_WWPN,
+ &port->status)
+ && !port->rport) {
+ struct fc_rport_identifiers ids;
+ ids.node_name = port->wwnn;
+ ids.port_name = port->wwpn;
+ ids.port_id = port->d_id;
+ ids.roles = FC_RPORT_ROLE_FCP_TARGET;
+ port->rport =
+ fc_remote_port_add(adapter->scsi_host, 0, &ids);
+ if (!port->rport)
+ ZFCP_LOG_NORMAL("failed registration of rport"
+ "(adapter %s, wwpn=0x%016Lx)\n",
+ zfcp_get_busid_by_port(port),
+ port->wwpn);
+ }
zfcp_port_put(port);
break;
case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index 42df7e5..cd98a2d 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -143,6 +143,8 @@
struct scsi_cmnd *, struct timer_list *);
extern int zfcp_scsi_command_sync(struct zfcp_unit *, struct scsi_cmnd *,
struct timer_list *);
+extern void zfcp_set_fc_host_attrs(struct zfcp_adapter *);
+extern void zfcp_set_fc_rport_attrs(struct zfcp_port *);
extern struct scsi_transport_template *zfcp_transport_template;
extern struct fc_function_template zfcp_transport_functions;
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 0d9f20e..c007b64 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -2062,6 +2062,7 @@
zfcp_erp_adapter_shutdown(adapter, 0);
return -EIO;
}
+ zfcp_set_fc_host_attrs(adapter);
return 0;
}
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index b61d309..31a7606 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -389,7 +389,7 @@
struct zfcp_unit *unit, *retval = NULL;
list_for_each_entry(port, &adapter->port_list_head, list) {
- if (id != port->scsi_id)
+ if (!port->rport || (id != port->rport->scsi_target_id))
continue;
list_for_each_entry(unit, &port->unit_list_head, list) {
if (lun == unit->scsi_lun) {
@@ -408,7 +408,7 @@
struct zfcp_port *port;
list_for_each_entry(port, &adapter->port_list_head, list) {
- if (id == port->scsi_id)
+ if (port->rport && (id == port->rport->scsi_target_id))
return port;
}
return (struct zfcp_port *) NULL;
@@ -634,7 +634,6 @@
{
int retval;
struct zfcp_unit *unit = (struct zfcp_unit *) scpnt->device->hostdata;
- struct Scsi_Host *scsi_host = scpnt->device->host;
if (!unit) {
ZFCP_LOG_NORMAL("bug: Tried reset for nonexistent unit\n");
@@ -729,7 +728,6 @@
{
int retval = 0;
struct zfcp_unit *unit;
- struct Scsi_Host *scsi_host = scpnt->device->host;
unit = (struct zfcp_unit *) scpnt->device->hostdata;
ZFCP_LOG_NORMAL("bus reset because of problems with "
@@ -753,7 +751,6 @@
{
int retval = 0;
struct zfcp_unit *unit;
- struct Scsi_Host *scsi_host = scpnt->device->host;
unit = (struct zfcp_unit *) scpnt->device->hostdata;
ZFCP_LOG_NORMAL("host reset because of problems with "
@@ -833,6 +830,7 @@
shost = adapter->scsi_host;
if (!shost)
return;
+ fc_remove_host(shost);
scsi_remove_host(shost);
scsi_host_put(shost);
adapter->scsi_host = NULL;
@@ -906,6 +904,18 @@
read_unlock_irqrestore(&zfcp_data.config_lock, flags);
}
+void
+zfcp_set_fc_host_attrs(struct zfcp_adapter *adapter)
+{
+ struct Scsi_Host *shost = adapter->scsi_host;
+
+ fc_host_node_name(shost) = adapter->wwnn;
+ fc_host_port_name(shost) = adapter->wwpn;
+ strncpy(fc_host_serial_number(shost), adapter->serial_number,
+ min(FC_SERIAL_NUMBER_SIZE, 32));
+ fc_host_supported_classes(shost) = FC_COS_CLASS2 | FC_COS_CLASS3;
+}
+
struct fc_function_template zfcp_transport_functions = {
.get_starget_port_id = zfcp_get_port_id,
.get_starget_port_name = zfcp_get_port_name,
@@ -913,6 +923,11 @@
.show_starget_port_id = 1,
.show_starget_port_name = 1,
.show_starget_node_name = 1,
+ .show_rport_supported_classes = 1,
+ .show_host_node_name = 1,
+ .show_host_port_name = 1,
+ .show_host_supported_classes = 1,
+ .show_host_serial_number = 1,
};
/**