arch/arm/mach-pxa/littleton.c - kernel/msm-4.19 - Gitiles

 /*
  *  linux/arch/arm/mach-pxa/littleton.c
  *
  *  Support for the Marvell Littleton Development Platform.
  *
  *  Author:	Jason Chagas (largely modified code)
  *  Created:	Nov 20, 2006
  *  Copyright:	(C) Copyright 2006 Marvell International Ltd.
  *
  *  2007-11-22  modified to align with latest kernel
  *              eric miao <eric.miao@marvell.com>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License version 2 as
  *  publishhed by the Free Software Foundation.
  */

 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/smc91x.h>

 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>

 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>

 #include <mach/pxa-regs.h>
 #include <mach/mfp-pxa300.h>
 #include <mach/pxafb.h>
 #include <mach/ssp.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa3xx_nand.h>
 #include <mach/littleton.h>

 #include "generic.h"

 /* Littleton MFP configurations */
 static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 	/* LCD */
 	GPIO54_LCD_LDD_0,
 	GPIO55_LCD_LDD_1,
 	GPIO56_LCD_LDD_2,
 	GPIO57_LCD_LDD_3,
 	GPIO58_LCD_LDD_4,
 	GPIO59_LCD_LDD_5,
 	GPIO60_LCD_LDD_6,
 	GPIO61_LCD_LDD_7,
 	GPIO62_LCD_LDD_8,
 	GPIO63_LCD_LDD_9,
 	GPIO64_LCD_LDD_10,
 	GPIO65_LCD_LDD_11,
 	GPIO66_LCD_LDD_12,
 	GPIO67_LCD_LDD_13,
 	GPIO68_LCD_LDD_14,
 	GPIO69_LCD_LDD_15,
 	GPIO70_LCD_LDD_16,
 	GPIO71_LCD_LDD_17,
 	GPIO72_LCD_FCLK,
 	GPIO73_LCD_LCLK,
 	GPIO74_LCD_PCLK,
 	GPIO75_LCD_BIAS,

 	/* SSP2 */
 	GPIO25_SSP2_SCLK,
 	GPIO27_SSP2_TXD,
 	GPIO17_GPIO,	/* SFRM as chip-select */

 	/* Debug Ethernet */
 	GPIO90_GPIO,

 	/* Keypad */
 	GPIO107_KP_DKIN_0,
 	GPIO108_KP_DKIN_1,
 	GPIO115_KP_MKIN_0,
 	GPIO116_KP_MKIN_1,
 	GPIO117_KP_MKIN_2,
 	GPIO118_KP_MKIN_3,
 	GPIO119_KP_MKIN_4,
 	GPIO120_KP_MKIN_5,
 	GPIO121_KP_MKOUT_0,
 	GPIO122_KP_MKOUT_1,
 	GPIO123_KP_MKOUT_2,
 	GPIO124_KP_MKOUT_3,
 	GPIO125_KP_MKOUT_4,
 };

 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start	= (LITTLETON_ETH_PHYS + 0x300),
 		.end	= (LITTLETON_ETH_PHYS + 0xfffff),
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
 		.start	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
 		.end	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	}
 };

 static struct smc91x_platdata littleton_smc91x_info = {
 	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
 		  SMC91X_NOWAIT | SMC91X_USE_DMA,
 };

 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
 	.dev		= {
 		.platform_data = &littleton_smc91x_info,
 	},
 };

 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
 	[0] = {
 		/* VGA */
 		.pixclock	= 38250,
 		.xres		= 480,
 		.yres		= 640,
 		.bpp		= 16,
 		.hsync_len	= 8,
 		.left_margin	= 8,
 		.right_margin	= 24,
 		.vsync_len	= 2,
 		.upper_margin	= 2,
 		.lower_margin	= 4,
 		.sync		= 0,
 	},
 	[1] = {
 		/* QVGA */
 		.pixclock	= 153000,
 		.xres		= 240,
 		.yres		= 320,
 		.bpp		= 16,
 		.hsync_len	= 8,
 		.left_margin	= 8,
 		.right_margin	= 88,
 		.vsync_len	= 2,
 		.upper_margin	= 2,
 		.lower_margin	= 2,
 		.sync		= 0,
 	},
 };

 static struct pxafb_mach_info littleton_lcd_info = {
 	.modes			= tpo_tdo24mtea1_modes,
 	.num_modes		= 2,
 	.lcd_conn		= LCD_COLOR_TFT_16BPP,
 };

 static void littleton_init_lcd(void)
 {
 	set_pxa_fb_info(&littleton_lcd_info);
 }
 #else
 static inline void littleton_init_lcd(void) {};
 #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */

 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
 static struct pxa2xx_spi_master littleton_spi_info = {
 	.num_chipselect		= 1,
 };

 static void littleton_tdo24m_cs(u32 cmd)
 {
 	gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT));
 }

 static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
 	.rx_threshold	= 1,
 	.tx_threshold	= 1,
 	.cs_control	= littleton_tdo24m_cs,
 };

 static struct spi_board_info littleton_spi_devices[] __initdata = {
 	{
 		.modalias	= "tdo24m",
 		.max_speed_hz	= 1000000,
 		.bus_num	= 2,
 		.chip_select	= 0,
 		.controller_data= &littleton_tdo24m_chip,
 	},
 };

 static void __init littleton_init_spi(void)
 {
 	int err;

 	err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
 	if (err) {
 		pr_warning("failed to request GPIO for LCS CS\n");
 		return;
 	}

 	gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);

 	pxa2xx_set_spi_info(2, &littleton_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
 }
 #else
 static inline void littleton_init_spi(void) {}
 #endif

 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int littleton_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
 	KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7),
 	KEY(1, 2, KEY_8), KEY(2, 2, KEY_9),

 	KEY(0, 3, KEY_KPASTERISK), 	/* * */
 	KEY(2, 3, KEY_KPDOT), 		/* # */

 	KEY(5, 4, KEY_ENTER),

 	KEY(5, 0, KEY_UP),
 	KEY(5, 1, KEY_DOWN),
 	KEY(5, 2, KEY_LEFT),
 	KEY(5, 3, KEY_RIGHT),
 	KEY(3, 2, KEY_HOME),
 	KEY(4, 1, KEY_END),
 	KEY(3, 3, KEY_BACK),

 	KEY(4, 0, KEY_SEND),
 	KEY(4, 2, KEY_VOLUMEUP),
 	KEY(4, 3, KEY_VOLUMEDOWN),

 	KEY(3, 0, KEY_F22),	/* soft1 */
 	KEY(3, 1, KEY_F23),	/* soft2 */
 };

 static struct pxa27x_keypad_platform_data littleton_keypad_info = {
 	.matrix_key_rows	= 6,
 	.matrix_key_cols	= 5,
 	.matrix_key_map		= littleton_matrix_key_map,
 	.matrix_key_map_size	= ARRAY_SIZE(littleton_matrix_key_map),

 	.enable_rotary0		= 1,
 	.rotary0_up_key		= KEY_UP,
 	.rotary0_down_key	= KEY_DOWN,

 	.debounce_interval	= 30,
 };
 static void __init littleton_init_keypad(void)
 {
 	pxa_set_keypad_info(&littleton_keypad_info);
 }
 #else
 static inline void littleton_init_keypad(void) {}
 #endif

 #if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
 static struct mtd_partition littleton_nand_partitions[] = {
 	[0] = {
 		.name        = "Bootloader",
 		.offset      = 0,
 		.size        = 0x060000,
 		.mask_flags  = MTD_WRITEABLE, /* force read-only */
 	},
 	[1] = {
 		.name        = "Kernel",
 		.offset      = 0x060000,
 		.size        = 0x200000,
 		.mask_flags  = MTD_WRITEABLE, /* force read-only */
 	},
 	[2] = {
 		.name        = "Filesystem",
 		.offset      = 0x0260000,
 		.size        = 0x3000000,     /* 48M - rootfs */
 	},
 	[3] = {
 		.name        = "MassStorage",
 		.offset      = 0x3260000,
 		.size        = 0x3d40000,
 	},
 	[4] = {
 		.name        = "BBT",
 		.offset      = 0x6FA0000,
 		.size        = 0x80000,
 		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
 	},
 	/* NOTE: we reserve some blocks at the end of the NAND flash for
 	 * bad block management, and the max number of relocation blocks
 	 * differs on different platforms. Please take care with it when
 	 * defining the partition table.
 	 */
 };

 static struct pxa3xx_nand_platform_data littleton_nand_info = {
 	.enable_arbiter	= 1,
 	.parts		= littleton_nand_partitions,
 	.nr_parts	= ARRAY_SIZE(littleton_nand_partitions),
 };

 static void __init littleton_init_nand(void)
 {
 	pxa3xx_set_nand_info(&littleton_nand_info);
 }
 #else
 static inline void littleton_init_nand(void) {}
 #endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */

 static void __init littleton_init(void)
 {
 	/* initialize MFP configurations */
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));

 	/*
 	 * Note: we depend bootloader set the correct
 	 * value to MSC register for SMC91x.
 	 */
 	platform_device_register(&smc91x_device);

 	littleton_init_spi();
 	littleton_init_lcd();
 	littleton_init_keypad();
 	littleton_init_nand();
 }

 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
 	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= littleton_init,
 MACHINE_END
	/*
	* linux/arch/arm/mach-pxa/littleton.c
	*
	* Support for the Marvell Littleton Development Platform.
	*
	* Author: Jason Chagas (largely modified code)
	* Created: Nov 20, 2006
	* Copyright: (C) Copyright 2006 Marvell International Ltd.
	*
	* 2007-11-22 modified to align with latest kernel
	* eric miao <eric.miao@marvell.com>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* publishhed by the Free Software Foundation.
	*/

	#include <linux/init.h>
	#include <linux/interrupt.h>
	#include <linux/delay.h>
	#include <linux/platform_device.h>
	#include <linux/clk.h>
	#include <linux/gpio.h>
	#include <linux/spi/spi.h>
	#include <linux/smc91x.h>

	#include <asm/types.h>
	#include <asm/setup.h>
	#include <asm/memory.h>
	#include <asm/mach-types.h>
	#include <mach/hardware.h>
	#include <asm/irq.h>

	#include <asm/mach/arch.h>
	#include <asm/mach/map.h>
	#include <asm/mach/irq.h>

	#include <mach/pxa-regs.h>
	#include <mach/mfp-pxa300.h>
	#include <mach/pxafb.h>
	#include <mach/ssp.h>
	#include <mach/pxa2xx_spi.h>
	#include <mach/pxa27x_keypad.h>
	#include <mach/pxa3xx_nand.h>
	#include <mach/littleton.h>

	#include "generic.h"

	/* Littleton MFP configurations */
	static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
	/* LCD */
	GPIO54_LCD_LDD_0,
	GPIO55_LCD_LDD_1,
	GPIO56_LCD_LDD_2,
	GPIO57_LCD_LDD_3,
	GPIO58_LCD_LDD_4,
	GPIO59_LCD_LDD_5,
	GPIO60_LCD_LDD_6,
	GPIO61_LCD_LDD_7,
	GPIO62_LCD_LDD_8,
	GPIO63_LCD_LDD_9,
	GPIO64_LCD_LDD_10,
	GPIO65_LCD_LDD_11,
	GPIO66_LCD_LDD_12,
	GPIO67_LCD_LDD_13,
	GPIO68_LCD_LDD_14,
	GPIO69_LCD_LDD_15,
	GPIO70_LCD_LDD_16,
	GPIO71_LCD_LDD_17,
	GPIO72_LCD_FCLK,
	GPIO73_LCD_LCLK,
	GPIO74_LCD_PCLK,
	GPIO75_LCD_BIAS,

	/* SSP2 */
	GPIO25_SSP2_SCLK,
	GPIO27_SSP2_TXD,
	GPIO17_GPIO, /* SFRM as chip-select */

	/* Debug Ethernet */
	GPIO90_GPIO,

	/* Keypad */
	GPIO107_KP_DKIN_0,
	GPIO108_KP_DKIN_1,
	GPIO115_KP_MKIN_0,
	GPIO116_KP_MKIN_1,
	GPIO117_KP_MKIN_2,
	GPIO118_KP_MKIN_3,
	GPIO119_KP_MKIN_4,
	GPIO120_KP_MKIN_5,
	GPIO121_KP_MKOUT_0,
	GPIO122_KP_MKOUT_1,
	GPIO123_KP_MKOUT_2,
	GPIO124_KP_MKOUT_3,
	GPIO125_KP_MKOUT_4,
	};

	static struct resource smc91x_resources[] = {
	[0] = {
	.start = (LITTLETON_ETH_PHYS + 0x300),
	.end = (LITTLETON_ETH_PHYS + 0xfffff),
	.flags = IORESOURCE_MEM,
	},
	[1] = {
	.start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
	.end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
	.flags = IORESOURCE_IRQ \| IORESOURCE_IRQ_LOWEDGE,
	}
	};

	static struct smc91x_platdata littleton_smc91x_info = {
	.flags = SMC91X_USE_8BIT \| SMC91X_USE_16BIT \|
	SMC91X_NOWAIT \| SMC91X_USE_DMA,
	};

	static struct platform_device smc91x_device = {
	.name = "smc91x",
	.id = 0,
	.num_resources = ARRAY_SIZE(smc91x_resources),
	.resource = smc91x_resources,
	.dev = {
	.platform_data = &littleton_smc91x_info,
	},
	};

	#if defined(CONFIG_FB_PXA) \|\| defined(CONFIG_FB_PXA_MODULE)
	static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
	[0] = {
	/* VGA */
	.pixclock = 38250,
	.xres = 480,
	.yres = 640,
	.bpp = 16,
	.hsync_len = 8,
	.left_margin = 8,
	.right_margin = 24,
	.vsync_len = 2,
	.upper_margin = 2,
	.lower_margin = 4,
	.sync = 0,
	},
	[1] = {
	/* QVGA */
	.pixclock = 153000,
	.xres = 240,
	.yres = 320,
	.bpp = 16,
	.hsync_len = 8,
	.left_margin = 8,
	.right_margin = 88,
	.vsync_len = 2,
	.upper_margin = 2,
	.lower_margin = 2,
	.sync = 0,
	},
	};

	static struct pxafb_mach_info littleton_lcd_info = {
	.modes = tpo_tdo24mtea1_modes,
	.num_modes = 2,
	.lcd_conn = LCD_COLOR_TFT_16BPP,
	};

	static void littleton_init_lcd(void)
	{
	set_pxa_fb_info(&littleton_lcd_info);
	}
	#else
	static inline void littleton_init_lcd(void) {};
	#endif /* CONFIG_FB_PXA \|\| CONFIG_FB_PXA_MODULE */

	#if defined(CONFIG_SPI_PXA2XX) \|\| defined(CONFIG_SPI_PXA2XX_MODULE)
	static struct pxa2xx_spi_master littleton_spi_info = {
	.num_chipselect = 1,
	};

	static void littleton_tdo24m_cs(u32 cmd)
	{
	gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT));
	}

	static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
	.rx_threshold = 1,
	.tx_threshold = 1,
	.cs_control = littleton_tdo24m_cs,
	};

	static struct spi_board_info littleton_spi_devices[] __initdata = {
	{
	.modalias = "tdo24m",
	.max_speed_hz = 1000000,
	.bus_num = 2,
	.chip_select = 0,
	.controller_data= &littleton_tdo24m_chip,
	},
	};

	static void __init littleton_init_spi(void)
	{
	int err;

	err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
	if (err) {
	pr_warning("failed to request GPIO for LCS CS\n");
	return;
	}

	gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);

	pxa2xx_set_spi_info(2, &littleton_spi_info);
	spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
	}
	#else
	static inline void littleton_init_spi(void) {}
	#endif

	#if defined(CONFIG_KEYBOARD_PXA27x) \|\| defined(CONFIG_KEYBOARD_PXA27x_MODULE)
	static unsigned int littleton_matrix_key_map[] = {
	/* KEY(row, col, key_code) */
	KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
	KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7),
	KEY(1, 2, KEY_8), KEY(2, 2, KEY_9),

	KEY(0, 3, KEY_KPASTERISK), /* * */
	KEY(2, 3, KEY_KPDOT), /* # */

	KEY(5, 4, KEY_ENTER),

	KEY(5, 0, KEY_UP),
	KEY(5, 1, KEY_DOWN),
	KEY(5, 2, KEY_LEFT),
	KEY(5, 3, KEY_RIGHT),
	KEY(3, 2, KEY_HOME),
	KEY(4, 1, KEY_END),
	KEY(3, 3, KEY_BACK),

	KEY(4, 0, KEY_SEND),
	KEY(4, 2, KEY_VOLUMEUP),
	KEY(4, 3, KEY_VOLUMEDOWN),

	KEY(3, 0, KEY_F22), /* soft1 */
	KEY(3, 1, KEY_F23), /* soft2 */
	};

	static struct pxa27x_keypad_platform_data littleton_keypad_info = {
	.matrix_key_rows = 6,
	.matrix_key_cols = 5,
	.matrix_key_map = littleton_matrix_key_map,
	.matrix_key_map_size = ARRAY_SIZE(littleton_matrix_key_map),

	.enable_rotary0 = 1,
	.rotary0_up_key = KEY_UP,
	.rotary0_down_key = KEY_DOWN,

	.debounce_interval = 30,
	};
	static void __init littleton_init_keypad(void)
	{
	pxa_set_keypad_info(&littleton_keypad_info);
	}
	#else
	static inline void littleton_init_keypad(void) {}
	#endif

	#if defined(CONFIG_MTD_NAND_PXA3xx) \|\| defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
	static struct mtd_partition littleton_nand_partitions[] = {
	[0] = {
	.name = "Bootloader",
	.offset = 0,
	.size = 0x060000,
	.mask_flags = MTD_WRITEABLE, /* force read-only */
	},
	[1] = {
	.name = "Kernel",
	.offset = 0x060000,
	.size = 0x200000,
	.mask_flags = MTD_WRITEABLE, /* force read-only */
	},
	[2] = {
	.name = "Filesystem",
	.offset = 0x0260000,
	.size = 0x3000000, /* 48M - rootfs */
	},
	[3] = {
	.name = "MassStorage",
	.offset = 0x3260000,
	.size = 0x3d40000,
	},
	[4] = {
	.name = "BBT",
	.offset = 0x6FA0000,
	.size = 0x80000,
	.mask_flags = MTD_WRITEABLE, /* force read-only */
	},
	/* NOTE: we reserve some blocks at the end of the NAND flash for
	* bad block management, and the max number of relocation blocks
	* differs on different platforms. Please take care with it when
	* defining the partition table.
	*/
	};

	static struct pxa3xx_nand_platform_data littleton_nand_info = {
	.enable_arbiter = 1,
	.parts = littleton_nand_partitions,
	.nr_parts = ARRAY_SIZE(littleton_nand_partitions),
	};

	static void __init littleton_init_nand(void)
	{
	pxa3xx_set_nand_info(&littleton_nand_info);
	}
	#else
	static inline void littleton_init_nand(void) {}
	#endif /* CONFIG_MTD_NAND_PXA3xx \|\| CONFIG_MTD_NAND_PXA3xx_MODULE */

	static void __init littleton_init(void)
	{
	/* initialize MFP configurations */
	pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));

	/*
	* Note: we depend bootloader set the correct
	* value to MSC register for SMC91x.
	*/
	platform_device_register(&smc91x_device);

	littleton_init_spi();
	littleton_init_lcd();
	littleton_init_keypad();
	littleton_init_nand();
	}

	MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
	.phys_io = 0x40000000,
	.boot_params = 0xa0000100,
	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
	.map_io = pxa_map_io,
	.init_irq = pxa3xx_init_irq,
	.timer = &pxa_timer,
	.init_machine = littleton_init,
	MACHINE_END