mfd: max8907: Remove regulator-compatible from DT docs
Commit "regulator: deprecate regulator-compatible DT property" deprecated
the use of the regulator-compatible DT property. Update the DT example in
the MAX8907 binding documentation to reflect this.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
diff --git a/Documentation/devicetree/bindings/regulator/max8907.txt b/Documentation/devicetree/bindings/regulator/max8907.txt
index 51e683b..371eccd 100644
--- a/Documentation/devicetree/bindings/regulator/max8907.txt
+++ b/Documentation/devicetree/bindings/regulator/max8907.txt
@@ -12,15 +12,16 @@
...
- in20-supply: The input supply for LDO20.
- regulators: A node that houses a sub-node for each regulator within the
- device. Each sub-node is identified using the regulator-compatible
- property, with valid values listed below. The content of each sub-node
- is defined by the standard binding for regulators; see regulator.txt.
+ device. Each sub-node is identified using the node's name (or the deprecated
+ regulator-compatible property if present), with valid values listed below.
+ The content of each sub-node is defined by the standard binding for
+ regulators; see regulator.txt.
Optional properties:
- maxim,system-power-controller: Boolean property indicating that the PMIC
controls the overall system power.
-Valid regulator-compatible values are:
+The valid names for regulators are:
sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10,
ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19, ldo20, out5v,
@@ -42,30 +43,21 @@
...
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- mbatt_reg: regulator@0 {
- reg = <0>;
- regulator-compatible = "mbatt";
+ mbatt_reg: mbatt {
regulator-name = "vbat_pmu";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
- regulator@1 {
- reg = <1>;
- regulator-compatible = "sd1";
+ sd1 {
regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
- regulator@2 {
- reg = <2>;
- regulator-compatible = "sd2";
+ sd2 {
regulator-name = "nvvdd_sv2,vdd_core";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;