| /* radio-aztech.c - Aztech radio card driver for Linux 2.2 |
| * |
| * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> |
| * Adapted to support the Video for Linux API by |
| * Russell Kroll <rkroll@exploits.org>. Based on original tuner code by: |
| * |
| * Quay Ly |
| * Donald Song |
| * Jason Lewis (jlewis@twilight.vtc.vsc.edu) |
| * Scott McGrath (smcgrath@twilight.vtc.vsc.edu) |
| * William McGrath (wmcgrath@twilight.vtc.vsc.edu) |
| * |
| * The basis for this code may be found at http://bigbang.vtc.vsc.edu/fmradio/ |
| * along with more information on the card itself. |
| * |
| * History: |
| * 1999-02-24 Russell Kroll <rkroll@exploits.org> |
| * Fine tuning/VIDEO_TUNER_LOW |
| * Range expanded to 87-108 MHz (from 87.9-107.8) |
| * |
| * Notable changes from the original source: |
| * - includes stripped down to the essentials |
| * - for loops used as delays replaced with udelay() |
| * - #defines removed, changed to static values |
| * - tuning structure changed - no more character arrays, other changes |
| */ |
| |
| #include <linux/module.h> /* Modules */ |
| #include <linux/init.h> /* Initdata */ |
| #include <linux/ioport.h> /* request_region */ |
| #include <linux/delay.h> /* udelay */ |
| #include <asm/io.h> /* outb, outb_p */ |
| #include <asm/uaccess.h> /* copy to/from user */ |
| #include <linux/videodev2.h> /* kernel radio structs */ |
| #include <media/v4l2-common.h> |
| |
| #include <linux/version.h> /* for KERNEL_VERSION MACRO */ |
| #define RADIO_VERSION KERNEL_VERSION(0,0,2) |
| |
| static struct v4l2_queryctrl radio_qctrl[] = { |
| { |
| .id = V4L2_CID_AUDIO_MUTE, |
| .name = "Mute", |
| .minimum = 0, |
| .maximum = 1, |
| .default_value = 1, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| },{ |
| .id = V4L2_CID_AUDIO_VOLUME, |
| .name = "Volume", |
| .minimum = 0, |
| .maximum = 0xff, |
| .step = 1, |
| .default_value = 0xff, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| } |
| }; |
| |
| /* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */ |
| |
| #ifndef CONFIG_RADIO_AZTECH_PORT |
| #define CONFIG_RADIO_AZTECH_PORT -1 |
| #endif |
| |
| static int io = CONFIG_RADIO_AZTECH_PORT; |
| static int radio_nr = -1; |
| static int radio_wait_time = 1000; |
| static struct mutex lock; |
| |
| struct az_device |
| { |
| int curvol; |
| unsigned long curfreq; |
| int stereo; |
| }; |
| |
| static int volconvert(int level) |
| { |
| level>>=14; /* Map 16bits down to 2 bit */ |
| level&=3; |
| |
| /* convert to card-friendly values */ |
| switch (level) |
| { |
| case 0: |
| return 0; |
| case 1: |
| return 1; |
| case 2: |
| return 4; |
| case 3: |
| return 5; |
| } |
| return 0; /* Quieten gcc */ |
| } |
| |
| static void send_0_byte (struct az_device *dev) |
| { |
| udelay(radio_wait_time); |
| outb_p(2+volconvert(dev->curvol), io); |
| outb_p(64+2+volconvert(dev->curvol), io); |
| } |
| |
| static void send_1_byte (struct az_device *dev) |
| { |
| udelay (radio_wait_time); |
| outb_p(128+2+volconvert(dev->curvol), io); |
| outb_p(128+64+2+volconvert(dev->curvol), io); |
| } |
| |
| static int az_setvol(struct az_device *dev, int vol) |
| { |
| mutex_lock(&lock); |
| outb (volconvert(vol), io); |
| mutex_unlock(&lock); |
| return 0; |
| } |
| |
| /* thanks to Michael Dwyer for giving me a dose of clues in |
| * the signal strength department.. |
| * |
| * This card has a stereo bit - bit 0 set = mono, not set = stereo |
| * It also has a "signal" bit - bit 1 set = bad signal, not set = good |
| * |
| */ |
| |
| static int az_getsigstr(struct az_device *dev) |
| { |
| if (inb(io) & 2) /* bit set = no signal present */ |
| return 0; |
| return 1; /* signal present */ |
| } |
| |
| static int az_getstereo(struct az_device *dev) |
| { |
| if (inb(io) & 1) /* bit set = mono */ |
| return 0; |
| return 1; /* stereo */ |
| } |
| |
| static int az_setfreq(struct az_device *dev, unsigned long frequency) |
| { |
| int i; |
| |
| frequency += 171200; /* Add 10.7 MHz IF */ |
| frequency /= 800; /* Convert to 50 kHz units */ |
| |
| mutex_lock(&lock); |
| |
| send_0_byte (dev); /* 0: LSB of frequency */ |
| |
| for (i = 0; i < 13; i++) /* : frequency bits (1-13) */ |
| if (frequency & (1 << i)) |
| send_1_byte (dev); |
| else |
| send_0_byte (dev); |
| |
| send_0_byte (dev); /* 14: test bit - always 0 */ |
| send_0_byte (dev); /* 15: test bit - always 0 */ |
| send_0_byte (dev); /* 16: band data 0 - always 0 */ |
| if (dev->stereo) /* 17: stereo (1 to enable) */ |
| send_1_byte (dev); |
| else |
| send_0_byte (dev); |
| |
| send_1_byte (dev); /* 18: band data 1 - unknown */ |
| send_0_byte (dev); /* 19: time base - always 0 */ |
| send_0_byte (dev); /* 20: spacing (0 = 25 kHz) */ |
| send_1_byte (dev); /* 21: spacing (1 = 25 kHz) */ |
| send_0_byte (dev); /* 22: spacing (0 = 25 kHz) */ |
| send_1_byte (dev); /* 23: AM/FM (FM = 1, always) */ |
| |
| /* latch frequency */ |
| |
| udelay (radio_wait_time); |
| outb_p(128+64+volconvert(dev->curvol), io); |
| |
| mutex_unlock(&lock); |
| |
| return 0; |
| } |
| |
| static int vidioc_querycap (struct file *file, void *priv, |
| struct v4l2_capability *v) |
| { |
| strlcpy(v->driver, "radio-aztech", sizeof (v->driver)); |
| strlcpy(v->card, "Aztech Radio", sizeof (v->card)); |
| sprintf(v->bus_info,"ISA"); |
| v->version = RADIO_VERSION; |
| v->capabilities = V4L2_CAP_TUNER; |
| return 0; |
| } |
| |
| static int vidioc_g_tuner (struct file *file, void *priv, |
| struct v4l2_tuner *v) |
| { |
| struct video_device *dev = video_devdata(file); |
| struct az_device *az = dev->priv; |
| |
| if (v->index > 0) |
| return -EINVAL; |
| |
| strcpy(v->name, "FM"); |
| v->type = V4L2_TUNER_RADIO; |
| |
| v->rangelow=(87*16000); |
| v->rangehigh=(108*16000); |
| v->rxsubchans =V4L2_TUNER_SUB_MONO|V4L2_TUNER_SUB_STEREO; |
| v->capability=V4L2_TUNER_CAP_LOW; |
| if(az_getstereo(az)) |
| v->audmode = V4L2_TUNER_MODE_STEREO; |
| else |
| v->audmode = V4L2_TUNER_MODE_MONO; |
| v->signal=0xFFFF*az_getsigstr(az); |
| |
| return 0; |
| } |
| |
| |
| static int vidioc_s_tuner (struct file *file, void *priv, |
| struct v4l2_tuner *v) |
| { |
| if (v->index > 0) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int vidioc_g_audio (struct file *file, void *priv, |
| struct v4l2_audio *a) |
| { |
| if (a->index > 1) |
| return -EINVAL; |
| |
| strcpy(a->name, "Radio"); |
| a->capability = V4L2_AUDCAP_STEREO; |
| return 0; |
| } |
| |
| static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) |
| { |
| *i = 0; |
| return 0; |
| } |
| |
| static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) |
| { |
| if (i != 0) |
| return -EINVAL; |
| return 0; |
| } |
| |
| |
| static int vidioc_s_audio (struct file *file, void *priv, |
| struct v4l2_audio *a) |
| { |
| if (a->index != 0) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int vidioc_s_frequency (struct file *file, void *priv, |
| struct v4l2_frequency *f) |
| { |
| struct video_device *dev = video_devdata(file); |
| struct az_device *az = dev->priv; |
| |
| az->curfreq = f->frequency; |
| az_setfreq(az, az->curfreq); |
| return 0; |
| } |
| |
| static int vidioc_g_frequency (struct file *file, void *priv, |
| struct v4l2_frequency *f) |
| { |
| struct video_device *dev = video_devdata(file); |
| struct az_device *az = dev->priv; |
| |
| f->type = V4L2_TUNER_RADIO; |
| f->frequency = az->curfreq; |
| |
| return 0; |
| } |
| |
| static int vidioc_queryctrl (struct file *file, void *priv, |
| struct v4l2_queryctrl *qc) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) { |
| if (qc->id && qc->id == radio_qctrl[i].id) { |
| memcpy(qc, &(radio_qctrl[i]), |
| sizeof(*qc)); |
| return (0); |
| } |
| } |
| return -EINVAL; |
| } |
| |
| static int vidioc_g_ctrl (struct file *file, void *priv, |
| struct v4l2_control *ctrl) |
| { |
| struct video_device *dev = video_devdata(file); |
| struct az_device *az = dev->priv; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUDIO_MUTE: |
| if (az->curvol==0) |
| ctrl->value=1; |
| else |
| ctrl->value=0; |
| return (0); |
| case V4L2_CID_AUDIO_VOLUME: |
| ctrl->value=az->curvol * 6554; |
| return (0); |
| } |
| return -EINVAL; |
| } |
| |
| static int vidioc_s_ctrl (struct file *file, void *priv, |
| struct v4l2_control *ctrl) |
| { |
| struct video_device *dev = video_devdata(file); |
| struct az_device *az = dev->priv; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUDIO_MUTE: |
| if (ctrl->value) { |
| az_setvol(az,0); |
| } else { |
| az_setvol(az,az->curvol); |
| } |
| return (0); |
| case V4L2_CID_AUDIO_VOLUME: |
| az_setvol(az,ctrl->value); |
| return (0); |
| } |
| return -EINVAL; |
| } |
| |
| static struct az_device aztech_unit; |
| |
| static const struct file_operations aztech_fops = { |
| .owner = THIS_MODULE, |
| .open = video_exclusive_open, |
| .release = video_exclusive_release, |
| .ioctl = video_ioctl2, |
| .compat_ioctl = v4l_compat_ioctl32, |
| .llseek = no_llseek, |
| }; |
| |
| static struct video_device aztech_radio= |
| { |
| .owner = THIS_MODULE, |
| .name = "Aztech radio", |
| .type = VID_TYPE_TUNER, |
| .fops = &aztech_fops, |
| .vidioc_querycap = vidioc_querycap, |
| .vidioc_g_tuner = vidioc_g_tuner, |
| .vidioc_s_tuner = vidioc_s_tuner, |
| .vidioc_g_audio = vidioc_g_audio, |
| .vidioc_s_audio = vidioc_s_audio, |
| .vidioc_g_input = vidioc_g_input, |
| .vidioc_s_input = vidioc_s_input, |
| .vidioc_g_frequency = vidioc_g_frequency, |
| .vidioc_s_frequency = vidioc_s_frequency, |
| .vidioc_queryctrl = vidioc_queryctrl, |
| .vidioc_g_ctrl = vidioc_g_ctrl, |
| .vidioc_s_ctrl = vidioc_s_ctrl, |
| }; |
| |
| module_param_named(debug,aztech_radio.debug, int, 0644); |
| MODULE_PARM_DESC(debug,"activates debug info"); |
| |
| static int __init aztech_init(void) |
| { |
| if(io==-1) |
| { |
| printk(KERN_ERR "You must set an I/O address with io=0x???\n"); |
| return -EINVAL; |
| } |
| |
| if (!request_region(io, 2, "aztech")) |
| { |
| printk(KERN_ERR "aztech: port 0x%x already in use\n", io); |
| return -EBUSY; |
| } |
| |
| mutex_init(&lock); |
| aztech_radio.priv=&aztech_unit; |
| |
| if(video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr)==-1) |
| { |
| release_region(io,2); |
| return -EINVAL; |
| } |
| |
| printk(KERN_INFO "Aztech radio card driver v1.00/19990224 rkroll@exploits.org\n"); |
| /* mute card - prevents noisy bootups */ |
| outb (0, io); |
| return 0; |
| } |
| |
| MODULE_AUTHOR("Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath"); |
| MODULE_DESCRIPTION("A driver for the Aztech radio card."); |
| MODULE_LICENSE("GPL"); |
| |
| module_param(io, int, 0); |
| module_param(radio_nr, int, 0); |
| MODULE_PARM_DESC(io, "I/O address of the Aztech card (0x350 or 0x358)"); |
| |
| static void __exit aztech_cleanup(void) |
| { |
| video_unregister_device(&aztech_radio); |
| release_region(io,2); |
| } |
| |
| module_init(aztech_init); |
| module_exit(aztech_cleanup); |