| /******************************************************************************* |
| |
| Intel 10 Gigabit PCI Express Linux driver |
| Copyright(c) 1999 - 2007 Intel Corporation. |
| |
| This program is free software; you can redistribute it and/or modify it |
| under the terms and conditions of the GNU General Public License, |
| version 2, as published by the Free Software Foundation. |
| |
| This program is distributed in the hope it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| more details. |
| |
| You should have received a copy of the GNU General Public License along with |
| this program; if not, write to the Free Software Foundation, Inc., |
| 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| |
| The full GNU General Public License is included in this distribution in |
| the file called "COPYING". |
| |
| Contact Information: |
| Linux NICS <linux.nics@intel.com> |
| e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
| Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| |
| *******************************************************************************/ |
| |
| #include <linux/types.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/netdevice.h> |
| #include <linux/vmalloc.h> |
| #include <linux/string.h> |
| #include <linux/in.h> |
| #include <linux/ip.h> |
| #include <linux/tcp.h> |
| #include <linux/ipv6.h> |
| #include <net/checksum.h> |
| #include <net/ip6_checksum.h> |
| #include <linux/ethtool.h> |
| #include <linux/if_vlan.h> |
| |
| #include "ixgbe.h" |
| #include "ixgbe_common.h" |
| |
| char ixgbe_driver_name[] = "ixgbe"; |
| static const char ixgbe_driver_string[] = |
| "Intel(R) 10 Gigabit PCI Express Network Driver"; |
| |
| #define DRV_VERSION "1.3.18-k2" |
| const char ixgbe_driver_version[] = DRV_VERSION; |
| static const char ixgbe_copyright[] = |
| "Copyright (c) 1999-2007 Intel Corporation."; |
| |
| static const struct ixgbe_info *ixgbe_info_tbl[] = { |
| [board_82598] = &ixgbe_82598_info, |
| }; |
| |
| /* ixgbe_pci_tbl - PCI Device ID Table |
| * |
| * Wildcard entries (PCI_ANY_ID) should come last |
| * Last entry must be all 0s |
| * |
| * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, |
| * Class, Class Mask, private data (not used) } |
| */ |
| static struct pci_device_id ixgbe_pci_tbl[] = { |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_DUAL_PORT), |
| board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_SINGLE_PORT), |
| board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT_DUAL_PORT), |
| board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_CX4), |
| board_82598 }, |
| |
| /* required last entry */ |
| {0, } |
| }; |
| MODULE_DEVICE_TABLE(pci, ixgbe_pci_tbl); |
| |
| #ifdef CONFIG_DCA |
| static int ixgbe_notify_dca(struct notifier_block *, unsigned long event, |
| void *p); |
| static struct notifier_block dca_notifier = { |
| .notifier_call = ixgbe_notify_dca, |
| .next = NULL, |
| .priority = 0 |
| }; |
| #endif |
| |
| MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); |
| MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(DRV_VERSION); |
| |
| #define DEFAULT_DEBUG_LEVEL_SHIFT 3 |
| |
| static void ixgbe_release_hw_control(struct ixgbe_adapter *adapter) |
| { |
| u32 ctrl_ext; |
| |
| /* Let firmware take over control of h/w */ |
| ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, |
| ctrl_ext & ~IXGBE_CTRL_EXT_DRV_LOAD); |
| } |
| |
| static void ixgbe_get_hw_control(struct ixgbe_adapter *adapter) |
| { |
| u32 ctrl_ext; |
| |
| /* Let firmware know the driver has taken over */ |
| ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, |
| ctrl_ext | IXGBE_CTRL_EXT_DRV_LOAD); |
| } |
| |
| #ifdef DEBUG |
| /** |
| * ixgbe_get_hw_dev_name - return device name string |
| * used by hardware layer to print debugging information |
| **/ |
| char *ixgbe_get_hw_dev_name(struct ixgbe_hw *hw) |
| { |
| struct ixgbe_adapter *adapter = hw->back; |
| struct net_device *netdev = adapter->netdev; |
| return netdev->name; |
| } |
| #endif |
| |
| static void ixgbe_set_ivar(struct ixgbe_adapter *adapter, u16 int_alloc_entry, |
| u8 msix_vector) |
| { |
| u32 ivar, index; |
| |
| msix_vector |= IXGBE_IVAR_ALLOC_VAL; |
| index = (int_alloc_entry >> 2) & 0x1F; |
| ivar = IXGBE_READ_REG(&adapter->hw, IXGBE_IVAR(index)); |
| ivar &= ~(0xFF << (8 * (int_alloc_entry & 0x3))); |
| ivar |= (msix_vector << (8 * (int_alloc_entry & 0x3))); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_IVAR(index), ivar); |
| } |
| |
| static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter, |
| struct ixgbe_tx_buffer |
| *tx_buffer_info) |
| { |
| if (tx_buffer_info->dma) { |
| pci_unmap_page(adapter->pdev, |
| tx_buffer_info->dma, |
| tx_buffer_info->length, PCI_DMA_TODEVICE); |
| tx_buffer_info->dma = 0; |
| } |
| if (tx_buffer_info->skb) { |
| dev_kfree_skb_any(tx_buffer_info->skb); |
| tx_buffer_info->skb = NULL; |
| } |
| /* tx_buffer_info must be completely set up in the transmit path */ |
| } |
| |
| static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *tx_ring, |
| unsigned int eop, |
| union ixgbe_adv_tx_desc *eop_desc) |
| { |
| /* Detect a transmit hang in hardware, this serializes the |
| * check with the clearing of time_stamp and movement of i */ |
| adapter->detect_tx_hung = false; |
| if (tx_ring->tx_buffer_info[eop].dma && |
| time_after(jiffies, tx_ring->tx_buffer_info[eop].time_stamp + HZ) && |
| !(IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & IXGBE_TFCS_TXOFF)) { |
| /* detected Tx unit hang */ |
| DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n" |
| " TDH <%x>\n" |
| " TDT <%x>\n" |
| " next_to_use <%x>\n" |
| " next_to_clean <%x>\n" |
| "tx_buffer_info[next_to_clean]\n" |
| " time_stamp <%lx>\n" |
| " next_to_watch <%x>\n" |
| " jiffies <%lx>\n" |
| " next_to_watch.status <%x>\n", |
| readl(adapter->hw.hw_addr + tx_ring->head), |
| readl(adapter->hw.hw_addr + tx_ring->tail), |
| tx_ring->next_to_use, |
| tx_ring->next_to_clean, |
| tx_ring->tx_buffer_info[eop].time_stamp, |
| eop, jiffies, eop_desc->wb.status); |
| return true; |
| } |
| |
| return false; |
| } |
| |
| #define IXGBE_MAX_TXD_PWR 14 |
| #define IXGBE_MAX_DATA_PER_TXD (1 << IXGBE_MAX_TXD_PWR) |
| |
| /* Tx Descriptors needed, worst case */ |
| #define TXD_USE_COUNT(S) (((S) >> IXGBE_MAX_TXD_PWR) + \ |
| (((S) & (IXGBE_MAX_DATA_PER_TXD - 1)) ? 1 : 0)) |
| #define DESC_NEEDED (TXD_USE_COUNT(IXGBE_MAX_DATA_PER_TXD) /* skb->data */ + \ |
| MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1) /* for context */ |
| |
| /** |
| * ixgbe_clean_tx_irq - Reclaim resources after transmit completes |
| * @adapter: board private structure |
| **/ |
| static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *tx_ring) |
| { |
| struct net_device *netdev = adapter->netdev; |
| union ixgbe_adv_tx_desc *tx_desc, *eop_desc; |
| struct ixgbe_tx_buffer *tx_buffer_info; |
| unsigned int i, eop; |
| bool cleaned = false; |
| unsigned int total_tx_bytes = 0, total_tx_packets = 0; |
| |
| i = tx_ring->next_to_clean; |
| eop = tx_ring->tx_buffer_info[i].next_to_watch; |
| eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop); |
| while (eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) { |
| cleaned = false; |
| while (!cleaned) { |
| tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i); |
| tx_buffer_info = &tx_ring->tx_buffer_info[i]; |
| cleaned = (i == eop); |
| |
| tx_ring->stats.bytes += tx_buffer_info->length; |
| if (cleaned) { |
| struct sk_buff *skb = tx_buffer_info->skb; |
| unsigned int segs, bytecount; |
| segs = skb_shinfo(skb)->gso_segs ?: 1; |
| /* multiply data chunks by size of headers */ |
| bytecount = ((segs - 1) * skb_headlen(skb)) + |
| skb->len; |
| total_tx_packets += segs; |
| total_tx_bytes += bytecount; |
| } |
| ixgbe_unmap_and_free_tx_resource(adapter, |
| tx_buffer_info); |
| tx_desc->wb.status = 0; |
| |
| i++; |
| if (i == tx_ring->count) |
| i = 0; |
| } |
| |
| tx_ring->stats.packets++; |
| |
| eop = tx_ring->tx_buffer_info[i].next_to_watch; |
| eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop); |
| |
| /* weight of a sort for tx, avoid endless transmit cleanup */ |
| if (total_tx_packets >= tx_ring->work_limit) |
| break; |
| } |
| |
| tx_ring->next_to_clean = i; |
| |
| #define TX_WAKE_THRESHOLD (DESC_NEEDED * 2) |
| if (total_tx_packets && netif_carrier_ok(netdev) && |
| (IXGBE_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) { |
| /* Make sure that anybody stopping the queue after this |
| * sees the new next_to_clean. |
| */ |
| smp_mb(); |
| #ifdef CONFIG_NETDEVICES_MULTIQUEUE |
| if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) && |
| !test_bit(__IXGBE_DOWN, &adapter->state)) { |
| netif_wake_subqueue(netdev, tx_ring->queue_index); |
| adapter->restart_queue++; |
| } |
| #else |
| if (netif_queue_stopped(netdev) && |
| !test_bit(__IXGBE_DOWN, &adapter->state)) { |
| netif_wake_queue(netdev); |
| adapter->restart_queue++; |
| } |
| #endif |
| } |
| |
| if (adapter->detect_tx_hung) |
| if (ixgbe_check_tx_hang(adapter, tx_ring, eop, eop_desc)) |
| #ifdef CONFIG_NETDEVICES_MULTIQUEUE |
| netif_stop_subqueue(netdev, tx_ring->queue_index); |
| #else |
| netif_stop_queue(netdev); |
| #endif |
| |
| if (total_tx_packets >= tx_ring->work_limit) |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, tx_ring->eims_value); |
| |
| tx_ring->total_bytes += total_tx_bytes; |
| tx_ring->total_packets += total_tx_packets; |
| adapter->net_stats.tx_bytes += total_tx_bytes; |
| adapter->net_stats.tx_packets += total_tx_packets; |
| cleaned = total_tx_packets ? true : false; |
| return cleaned; |
| } |
| |
| #ifdef CONFIG_DCA |
| static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *rxr) |
| { |
| u32 rxctrl; |
| int cpu = get_cpu(); |
| int q = rxr - adapter->rx_ring; |
| |
| if (rxr->cpu != cpu) { |
| rxctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q)); |
| rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK; |
| rxctrl |= dca_get_tag(cpu); |
| rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN; |
| rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN; |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q), rxctrl); |
| rxr->cpu = cpu; |
| } |
| put_cpu(); |
| } |
| |
| static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *txr) |
| { |
| u32 txctrl; |
| int cpu = get_cpu(); |
| int q = txr - adapter->tx_ring; |
| |
| if (txr->cpu != cpu) { |
| txctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q)); |
| txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK; |
| txctrl |= dca_get_tag(cpu); |
| txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q), txctrl); |
| txr->cpu = cpu; |
| } |
| put_cpu(); |
| } |
| |
| static void ixgbe_setup_dca(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| |
| if (!(adapter->flags & IXGBE_FLAG_DCA_ENABLED)) |
| return; |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| adapter->tx_ring[i].cpu = -1; |
| ixgbe_update_tx_dca(adapter, &adapter->tx_ring[i]); |
| } |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| adapter->rx_ring[i].cpu = -1; |
| ixgbe_update_rx_dca(adapter, &adapter->rx_ring[i]); |
| } |
| } |
| |
| static int __ixgbe_notify_dca(struct device *dev, void *data) |
| { |
| struct net_device *netdev = dev_get_drvdata(dev); |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| unsigned long event = *(unsigned long *)data; |
| |
| switch (event) { |
| case DCA_PROVIDER_ADD: |
| adapter->flags |= IXGBE_FLAG_DCA_ENABLED; |
| /* Always use CB2 mode, difference is masked |
| * in the CB driver. */ |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2); |
| if (dca_add_requester(dev) == 0) { |
| ixgbe_setup_dca(adapter); |
| break; |
| } |
| /* Fall Through since DCA is disabled. */ |
| case DCA_PROVIDER_REMOVE: |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { |
| dca_remove_requester(dev); |
| adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1); |
| } |
| break; |
| } |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_DCA */ |
| /** |
| * ixgbe_receive_skb - Send a completed packet up the stack |
| * @adapter: board private structure |
| * @skb: packet to send up |
| * @is_vlan: packet has a VLAN tag |
| * @tag: VLAN tag from descriptor |
| **/ |
| static void ixgbe_receive_skb(struct ixgbe_adapter *adapter, |
| struct sk_buff *skb, bool is_vlan, |
| u16 tag) |
| { |
| if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) { |
| if (adapter->vlgrp && is_vlan) |
| vlan_hwaccel_receive_skb(skb, adapter->vlgrp, tag); |
| else |
| netif_receive_skb(skb); |
| } else { |
| |
| if (adapter->vlgrp && is_vlan) |
| vlan_hwaccel_rx(skb, adapter->vlgrp, tag); |
| else |
| netif_rx(skb); |
| } |
| } |
| |
| /** |
| * ixgbe_rx_checksum - indicate in skb if hw indicated a good cksum |
| * @adapter: address of board private structure |
| * @status_err: hardware indication of status of receive |
| * @skb: skb currently being received and modified |
| **/ |
| static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter, |
| u32 status_err, |
| struct sk_buff *skb) |
| { |
| skb->ip_summed = CHECKSUM_NONE; |
| |
| /* Ignore Checksum bit is set, or rx csum disabled */ |
| if ((status_err & IXGBE_RXD_STAT_IXSM) || |
| !(adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED)) |
| return; |
| |
| /* if IP and error */ |
| if ((status_err & IXGBE_RXD_STAT_IPCS) && |
| (status_err & IXGBE_RXDADV_ERR_IPE)) { |
| adapter->hw_csum_rx_error++; |
| return; |
| } |
| |
| if (!(status_err & IXGBE_RXD_STAT_L4CS)) |
| return; |
| |
| if (status_err & IXGBE_RXDADV_ERR_TCPE) { |
| adapter->hw_csum_rx_error++; |
| return; |
| } |
| |
| /* It must be a TCP or UDP packet with a valid checksum */ |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| adapter->hw_csum_rx_good++; |
| } |
| |
| /** |
| * ixgbe_alloc_rx_buffers - Replace used receive buffers; packet split |
| * @adapter: address of board private structure |
| **/ |
| static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *rx_ring, |
| int cleaned_count) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct pci_dev *pdev = adapter->pdev; |
| union ixgbe_adv_rx_desc *rx_desc; |
| struct ixgbe_rx_buffer *rx_buffer_info; |
| struct sk_buff *skb; |
| unsigned int i; |
| unsigned int bufsz = adapter->rx_buf_len + NET_IP_ALIGN; |
| |
| i = rx_ring->next_to_use; |
| rx_buffer_info = &rx_ring->rx_buffer_info[i]; |
| |
| while (cleaned_count--) { |
| rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i); |
| |
| if (!rx_buffer_info->page && |
| (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)) { |
| rx_buffer_info->page = alloc_page(GFP_ATOMIC); |
| if (!rx_buffer_info->page) { |
| adapter->alloc_rx_page_failed++; |
| goto no_buffers; |
| } |
| rx_buffer_info->page_dma = |
| pci_map_page(pdev, rx_buffer_info->page, |
| 0, PAGE_SIZE, PCI_DMA_FROMDEVICE); |
| } |
| |
| if (!rx_buffer_info->skb) { |
| skb = netdev_alloc_skb(netdev, bufsz); |
| |
| if (!skb) { |
| adapter->alloc_rx_buff_failed++; |
| goto no_buffers; |
| } |
| |
| /* |
| * Make buffer alignment 2 beyond a 16 byte boundary |
| * this will result in a 16 byte aligned IP header after |
| * the 14 byte MAC header is removed |
| */ |
| skb_reserve(skb, NET_IP_ALIGN); |
| |
| rx_buffer_info->skb = skb; |
| rx_buffer_info->dma = pci_map_single(pdev, skb->data, |
| bufsz, |
| PCI_DMA_FROMDEVICE); |
| } |
| /* Refresh the desc even if buffer_addrs didn't change because |
| * each write-back erases this info. */ |
| if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { |
| rx_desc->read.pkt_addr = |
| cpu_to_le64(rx_buffer_info->page_dma); |
| rx_desc->read.hdr_addr = |
| cpu_to_le64(rx_buffer_info->dma); |
| } else { |
| rx_desc->read.pkt_addr = |
| cpu_to_le64(rx_buffer_info->dma); |
| } |
| |
| i++; |
| if (i == rx_ring->count) |
| i = 0; |
| rx_buffer_info = &rx_ring->rx_buffer_info[i]; |
| } |
| no_buffers: |
| if (rx_ring->next_to_use != i) { |
| rx_ring->next_to_use = i; |
| if (i-- == 0) |
| i = (rx_ring->count - 1); |
| |
| /* |
| * Force memory writes to complete before letting h/w |
| * know there are new descriptors to fetch. (Only |
| * applicable for weak-ordered memory model archs, |
| * such as IA-64). |
| */ |
| wmb(); |
| writel(i, adapter->hw.hw_addr + rx_ring->tail); |
| } |
| } |
| |
| static bool ixgbe_clean_rx_irq(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *rx_ring, |
| int *work_done, int work_to_do) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct pci_dev *pdev = adapter->pdev; |
| union ixgbe_adv_rx_desc *rx_desc, *next_rxd; |
| struct ixgbe_rx_buffer *rx_buffer_info, *next_buffer; |
| struct sk_buff *skb; |
| unsigned int i; |
| u32 upper_len, len, staterr; |
| u16 hdr_info, vlan_tag; |
| bool is_vlan, cleaned = false; |
| int cleaned_count = 0; |
| unsigned int total_rx_bytes = 0, total_rx_packets = 0; |
| |
| i = rx_ring->next_to_clean; |
| upper_len = 0; |
| rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i); |
| staterr = le32_to_cpu(rx_desc->wb.upper.status_error); |
| rx_buffer_info = &rx_ring->rx_buffer_info[i]; |
| is_vlan = (staterr & IXGBE_RXD_STAT_VP); |
| vlan_tag = le16_to_cpu(rx_desc->wb.upper.vlan); |
| |
| while (staterr & IXGBE_RXD_STAT_DD) { |
| if (*work_done >= work_to_do) |
| break; |
| (*work_done)++; |
| |
| if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { |
| hdr_info = |
| le16_to_cpu(rx_desc->wb.lower.lo_dword.hdr_info); |
| len = |
| ((hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >> |
| IXGBE_RXDADV_HDRBUFLEN_SHIFT); |
| if (hdr_info & IXGBE_RXDADV_SPH) |
| adapter->rx_hdr_split++; |
| if (len > IXGBE_RX_HDR_SIZE) |
| len = IXGBE_RX_HDR_SIZE; |
| upper_len = le16_to_cpu(rx_desc->wb.upper.length); |
| } else |
| len = le16_to_cpu(rx_desc->wb.upper.length); |
| |
| cleaned = true; |
| skb = rx_buffer_info->skb; |
| prefetch(skb->data - NET_IP_ALIGN); |
| rx_buffer_info->skb = NULL; |
| |
| if (len && !skb_shinfo(skb)->nr_frags) { |
| pci_unmap_single(pdev, rx_buffer_info->dma, |
| adapter->rx_buf_len + NET_IP_ALIGN, |
| PCI_DMA_FROMDEVICE); |
| skb_put(skb, len); |
| } |
| |
| if (upper_len) { |
| pci_unmap_page(pdev, rx_buffer_info->page_dma, |
| PAGE_SIZE, PCI_DMA_FROMDEVICE); |
| rx_buffer_info->page_dma = 0; |
| skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags, |
| rx_buffer_info->page, 0, upper_len); |
| rx_buffer_info->page = NULL; |
| |
| skb->len += upper_len; |
| skb->data_len += upper_len; |
| skb->truesize += upper_len; |
| } |
| |
| i++; |
| if (i == rx_ring->count) |
| i = 0; |
| next_buffer = &rx_ring->rx_buffer_info[i]; |
| |
| next_rxd = IXGBE_RX_DESC_ADV(*rx_ring, i); |
| prefetch(next_rxd); |
| |
| cleaned_count++; |
| if (staterr & IXGBE_RXD_STAT_EOP) { |
| rx_ring->stats.packets++; |
| rx_ring->stats.bytes += skb->len; |
| } else { |
| rx_buffer_info->skb = next_buffer->skb; |
| rx_buffer_info->dma = next_buffer->dma; |
| next_buffer->skb = skb; |
| adapter->non_eop_descs++; |
| goto next_desc; |
| } |
| |
| if (staterr & IXGBE_RXDADV_ERR_FRAME_ERR_MASK) { |
| dev_kfree_skb_irq(skb); |
| goto next_desc; |
| } |
| |
| ixgbe_rx_checksum(adapter, staterr, skb); |
| |
| /* probably a little skewed due to removing CRC */ |
| total_rx_bytes += skb->len; |
| total_rx_packets++; |
| |
| skb->protocol = eth_type_trans(skb, netdev); |
| ixgbe_receive_skb(adapter, skb, is_vlan, vlan_tag); |
| netdev->last_rx = jiffies; |
| |
| next_desc: |
| rx_desc->wb.upper.status_error = 0; |
| |
| /* return some buffers to hardware, one at a time is too slow */ |
| if (cleaned_count >= IXGBE_RX_BUFFER_WRITE) { |
| ixgbe_alloc_rx_buffers(adapter, rx_ring, cleaned_count); |
| cleaned_count = 0; |
| } |
| |
| /* use prefetched values */ |
| rx_desc = next_rxd; |
| rx_buffer_info = next_buffer; |
| |
| staterr = le32_to_cpu(rx_desc->wb.upper.status_error); |
| is_vlan = (staterr & IXGBE_RXD_STAT_VP); |
| vlan_tag = le16_to_cpu(rx_desc->wb.upper.vlan); |
| } |
| |
| rx_ring->next_to_clean = i; |
| cleaned_count = IXGBE_DESC_UNUSED(rx_ring); |
| |
| if (cleaned_count) |
| ixgbe_alloc_rx_buffers(adapter, rx_ring, cleaned_count); |
| |
| adapter->net_stats.rx_bytes += total_rx_bytes; |
| adapter->net_stats.rx_packets += total_rx_packets; |
| |
| rx_ring->total_packets += total_rx_packets; |
| rx_ring->total_bytes += total_rx_bytes; |
| adapter->net_stats.rx_bytes += total_rx_bytes; |
| adapter->net_stats.rx_packets += total_rx_packets; |
| |
| return cleaned; |
| } |
| |
| static int ixgbe_clean_rxonly(struct napi_struct *, int); |
| /** |
| * ixgbe_configure_msix - Configure MSI-X hardware |
| * @adapter: board private structure |
| * |
| * ixgbe_configure_msix sets up the hardware to properly generate MSI-X |
| * interrupts. |
| **/ |
| static void ixgbe_configure_msix(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_q_vector *q_vector; |
| int i, j, q_vectors, v_idx, r_idx; |
| u32 mask; |
| |
| q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; |
| |
| /* Populate the IVAR table and set the ITR values to the |
| * corresponding register. |
| */ |
| for (v_idx = 0; v_idx < q_vectors; v_idx++) { |
| q_vector = &adapter->q_vector[v_idx]; |
| /* XXX for_each_bit(...) */ |
| r_idx = find_first_bit(q_vector->rxr_idx, |
| adapter->num_rx_queues); |
| |
| for (i = 0; i < q_vector->rxr_count; i++) { |
| j = adapter->rx_ring[r_idx].reg_idx; |
| ixgbe_set_ivar(adapter, IXGBE_IVAR_RX_QUEUE(j), v_idx); |
| r_idx = find_next_bit(q_vector->rxr_idx, |
| adapter->num_rx_queues, |
| r_idx + 1); |
| } |
| r_idx = find_first_bit(q_vector->txr_idx, |
| adapter->num_tx_queues); |
| |
| for (i = 0; i < q_vector->txr_count; i++) { |
| j = adapter->tx_ring[r_idx].reg_idx; |
| ixgbe_set_ivar(adapter, IXGBE_IVAR_TX_QUEUE(j), v_idx); |
| r_idx = find_next_bit(q_vector->txr_idx, |
| adapter->num_tx_queues, |
| r_idx + 1); |
| } |
| |
| /* if this is a tx only vector use half the irq (tx) rate */ |
| if (q_vector->txr_count && !q_vector->rxr_count) |
| q_vector->eitr = adapter->tx_eitr; |
| else |
| /* rx only or mixed */ |
| q_vector->eitr = adapter->rx_eitr; |
| |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx), |
| EITR_INTS_PER_SEC_TO_REG(q_vector->eitr)); |
| } |
| |
| ixgbe_set_ivar(adapter, IXGBE_IVAR_OTHER_CAUSES_INDEX, v_idx); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx), 1950); |
| |
| /* set up to autoclear timer, lsc, and the vectors */ |
| mask = IXGBE_EIMS_ENABLE_MASK; |
| mask &= ~IXGBE_EIMS_OTHER; |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, mask); |
| } |
| |
| enum latency_range { |
| lowest_latency = 0, |
| low_latency = 1, |
| bulk_latency = 2, |
| latency_invalid = 255 |
| }; |
| |
| /** |
| * ixgbe_update_itr - update the dynamic ITR value based on statistics |
| * @adapter: pointer to adapter |
| * @eitr: eitr setting (ints per sec) to give last timeslice |
| * @itr_setting: current throttle rate in ints/second |
| * @packets: the number of packets during this measurement interval |
| * @bytes: the number of bytes during this measurement interval |
| * |
| * Stores a new ITR value based on packets and byte |
| * counts during the last interrupt. The advantage of per interrupt |
| * computation is faster updates and more accurate ITR for the current |
| * traffic pattern. Constants in this function were computed |
| * based on theoretical maximum wire speed and thresholds were set based |
| * on testing data as well as attempting to minimize response time |
| * while increasing bulk throughput. |
| * this functionality is controlled by the InterruptThrottleRate module |
| * parameter (see ixgbe_param.c) |
| **/ |
| static u8 ixgbe_update_itr(struct ixgbe_adapter *adapter, |
| u32 eitr, u8 itr_setting, |
| int packets, int bytes) |
| { |
| unsigned int retval = itr_setting; |
| u32 timepassed_us; |
| u64 bytes_perint; |
| |
| if (packets == 0) |
| goto update_itr_done; |
| |
| |
| /* simple throttlerate management |
| * 0-20MB/s lowest (100000 ints/s) |
| * 20-100MB/s low (20000 ints/s) |
| * 100-1249MB/s bulk (8000 ints/s) |
| */ |
| /* what was last interrupt timeslice? */ |
| timepassed_us = 1000000/eitr; |
| bytes_perint = bytes / timepassed_us; /* bytes/usec */ |
| |
| switch (itr_setting) { |
| case lowest_latency: |
| if (bytes_perint > adapter->eitr_low) |
| retval = low_latency; |
| break; |
| case low_latency: |
| if (bytes_perint > adapter->eitr_high) |
| retval = bulk_latency; |
| else if (bytes_perint <= adapter->eitr_low) |
| retval = lowest_latency; |
| break; |
| case bulk_latency: |
| if (bytes_perint <= adapter->eitr_high) |
| retval = low_latency; |
| break; |
| } |
| |
| update_itr_done: |
| return retval; |
| } |
| |
| static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector) |
| { |
| struct ixgbe_adapter *adapter = q_vector->adapter; |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 new_itr; |
| u8 current_itr, ret_itr; |
| int i, r_idx, v_idx = ((void *)q_vector - (void *)(adapter->q_vector)) / |
| sizeof(struct ixgbe_q_vector); |
| struct ixgbe_ring *rx_ring, *tx_ring; |
| |
| r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues); |
| for (i = 0; i < q_vector->txr_count; i++) { |
| tx_ring = &(adapter->tx_ring[r_idx]); |
| ret_itr = ixgbe_update_itr(adapter, q_vector->eitr, |
| q_vector->tx_eitr, |
| tx_ring->total_packets, |
| tx_ring->total_bytes); |
| /* if the result for this queue would decrease interrupt |
| * rate for this vector then use that result */ |
| q_vector->tx_eitr = ((q_vector->tx_eitr > ret_itr) ? |
| q_vector->tx_eitr - 1 : ret_itr); |
| r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues, |
| r_idx + 1); |
| } |
| |
| r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues); |
| for (i = 0; i < q_vector->rxr_count; i++) { |
| rx_ring = &(adapter->rx_ring[r_idx]); |
| ret_itr = ixgbe_update_itr(adapter, q_vector->eitr, |
| q_vector->rx_eitr, |
| rx_ring->total_packets, |
| rx_ring->total_bytes); |
| /* if the result for this queue would decrease interrupt |
| * rate for this vector then use that result */ |
| q_vector->rx_eitr = ((q_vector->rx_eitr > ret_itr) ? |
| q_vector->rx_eitr - 1 : ret_itr); |
| r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues, |
| r_idx + 1); |
| } |
| |
| current_itr = max(q_vector->rx_eitr, q_vector->tx_eitr); |
| |
| switch (current_itr) { |
| /* counts and packets in update_itr are dependent on these numbers */ |
| case lowest_latency: |
| new_itr = 100000; |
| break; |
| case low_latency: |
| new_itr = 20000; /* aka hwitr = ~200 */ |
| break; |
| case bulk_latency: |
| default: |
| new_itr = 8000; |
| break; |
| } |
| |
| if (new_itr != q_vector->eitr) { |
| u32 itr_reg; |
| /* do an exponential smoothing */ |
| new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100); |
| q_vector->eitr = new_itr; |
| itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr); |
| /* must write high and low 16 bits to reset counter */ |
| DPRINTK(TX_ERR, DEBUG, "writing eitr(%d): %08X\n", v_idx, |
| itr_reg); |
| IXGBE_WRITE_REG(hw, IXGBE_EITR(v_idx), itr_reg | (itr_reg)<<16); |
| } |
| |
| return; |
| } |
| |
| static irqreturn_t ixgbe_msix_lsc(int irq, void *data) |
| { |
| struct net_device *netdev = data; |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 eicr = IXGBE_READ_REG(hw, IXGBE_EICR); |
| |
| if (eicr & IXGBE_EICR_LSC) { |
| adapter->lsc_int++; |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) |
| mod_timer(&adapter->watchdog_timer, jiffies); |
| } |
| |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) |
| IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_OTHER); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data) |
| { |
| struct ixgbe_q_vector *q_vector = data; |
| struct ixgbe_adapter *adapter = q_vector->adapter; |
| struct ixgbe_ring *txr; |
| int i, r_idx; |
| |
| if (!q_vector->txr_count) |
| return IRQ_HANDLED; |
| |
| r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues); |
| for (i = 0; i < q_vector->txr_count; i++) { |
| txr = &(adapter->tx_ring[r_idx]); |
| #ifdef CONFIG_DCA |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) |
| ixgbe_update_tx_dca(adapter, txr); |
| #endif |
| txr->total_bytes = 0; |
| txr->total_packets = 0; |
| ixgbe_clean_tx_irq(adapter, txr); |
| r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues, |
| r_idx + 1); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * ixgbe_msix_clean_rx - single unshared vector rx clean (all queues) |
| * @irq: unused |
| * @data: pointer to our q_vector struct for this interrupt vector |
| **/ |
| static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data) |
| { |
| struct ixgbe_q_vector *q_vector = data; |
| struct ixgbe_adapter *adapter = q_vector->adapter; |
| struct ixgbe_ring *rxr; |
| int r_idx; |
| |
| r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues); |
| if (!q_vector->rxr_count) |
| return IRQ_HANDLED; |
| |
| rxr = &(adapter->rx_ring[r_idx]); |
| /* disable interrupts on this vector only */ |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, rxr->v_idx); |
| rxr->total_bytes = 0; |
| rxr->total_packets = 0; |
| netif_rx_schedule(adapter->netdev, &q_vector->napi); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t ixgbe_msix_clean_many(int irq, void *data) |
| { |
| ixgbe_msix_clean_rx(irq, data); |
| ixgbe_msix_clean_tx(irq, data); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * ixgbe_clean_rxonly - msix (aka one shot) rx clean routine |
| * @napi: napi struct with our devices info in it |
| * @budget: amount of work driver is allowed to do this pass, in packets |
| * |
| **/ |
| static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget) |
| { |
| struct ixgbe_q_vector *q_vector = |
| container_of(napi, struct ixgbe_q_vector, napi); |
| struct ixgbe_adapter *adapter = q_vector->adapter; |
| struct ixgbe_ring *rxr; |
| int work_done = 0; |
| long r_idx; |
| |
| r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues); |
| rxr = &(adapter->rx_ring[r_idx]); |
| #ifdef CONFIG_DCA |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) |
| ixgbe_update_rx_dca(adapter, rxr); |
| #endif |
| |
| ixgbe_clean_rx_irq(adapter, rxr, &work_done, budget); |
| |
| /* If all Rx work done, exit the polling mode */ |
| if (work_done < budget) { |
| netif_rx_complete(adapter->netdev, napi); |
| if (adapter->rx_eitr < IXGBE_MIN_ITR_USECS) |
| ixgbe_set_itr_msix(q_vector); |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, rxr->v_idx); |
| } |
| |
| return work_done; |
| } |
| |
| static inline void map_vector_to_rxq(struct ixgbe_adapter *a, int v_idx, |
| int r_idx) |
| { |
| a->q_vector[v_idx].adapter = a; |
| set_bit(r_idx, a->q_vector[v_idx].rxr_idx); |
| a->q_vector[v_idx].rxr_count++; |
| a->rx_ring[r_idx].v_idx = 1 << v_idx; |
| } |
| |
| static inline void map_vector_to_txq(struct ixgbe_adapter *a, int v_idx, |
| int r_idx) |
| { |
| a->q_vector[v_idx].adapter = a; |
| set_bit(r_idx, a->q_vector[v_idx].txr_idx); |
| a->q_vector[v_idx].txr_count++; |
| a->tx_ring[r_idx].v_idx = 1 << v_idx; |
| } |
| |
| /** |
| * ixgbe_map_rings_to_vectors - Maps descriptor rings to vectors |
| * @adapter: board private structure to initialize |
| * @vectors: allotted vector count for descriptor rings |
| * |
| * This function maps descriptor rings to the queue-specific vectors |
| * we were allotted through the MSI-X enabling code. Ideally, we'd have |
| * one vector per ring/queue, but on a constrained vector budget, we |
| * group the rings as "efficiently" as possible. You would add new |
| * mapping configurations in here. |
| **/ |
| static int ixgbe_map_rings_to_vectors(struct ixgbe_adapter *adapter, |
| int vectors) |
| { |
| int v_start = 0; |
| int rxr_idx = 0, txr_idx = 0; |
| int rxr_remaining = adapter->num_rx_queues; |
| int txr_remaining = adapter->num_tx_queues; |
| int i, j; |
| int rqpv, tqpv; |
| int err = 0; |
| |
| /* No mapping required if MSI-X is disabled. */ |
| if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) |
| goto out; |
| |
| /* |
| * The ideal configuration... |
| * We have enough vectors to map one per queue. |
| */ |
| if (vectors == adapter->num_rx_queues + adapter->num_tx_queues) { |
| for (; rxr_idx < rxr_remaining; v_start++, rxr_idx++) |
| map_vector_to_rxq(adapter, v_start, rxr_idx); |
| |
| for (; txr_idx < txr_remaining; v_start++, txr_idx++) |
| map_vector_to_txq(adapter, v_start, txr_idx); |
| |
| goto out; |
| } |
| |
| /* |
| * If we don't have enough vectors for a 1-to-1 |
| * mapping, we'll have to group them so there are |
| * multiple queues per vector. |
| */ |
| /* Re-adjusting *qpv takes care of the remainder. */ |
| for (i = v_start; i < vectors; i++) { |
| rqpv = DIV_ROUND_UP(rxr_remaining, vectors - i); |
| for (j = 0; j < rqpv; j++) { |
| map_vector_to_rxq(adapter, i, rxr_idx); |
| rxr_idx++; |
| rxr_remaining--; |
| } |
| } |
| for (i = v_start; i < vectors; i++) { |
| tqpv = DIV_ROUND_UP(txr_remaining, vectors - i); |
| for (j = 0; j < tqpv; j++) { |
| map_vector_to_txq(adapter, i, txr_idx); |
| txr_idx++; |
| txr_remaining--; |
| } |
| } |
| |
| out: |
| return err; |
| } |
| |
| /** |
| * ixgbe_request_msix_irqs - Initialize MSI-X interrupts |
| * @adapter: board private structure |
| * |
| * ixgbe_request_msix_irqs allocates MSI-X vectors and requests |
| * interrupts from the kernel. |
| **/ |
| static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| irqreturn_t (*handler)(int, void *); |
| int i, vector, q_vectors, err; |
| |
| /* Decrement for Other and TCP Timer vectors */ |
| q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; |
| |
| /* Map the Tx/Rx rings to the vectors we were allotted. */ |
| err = ixgbe_map_rings_to_vectors(adapter, q_vectors); |
| if (err) |
| goto out; |
| |
| #define SET_HANDLER(_v) ((!(_v)->rxr_count) ? &ixgbe_msix_clean_tx : \ |
| (!(_v)->txr_count) ? &ixgbe_msix_clean_rx : \ |
| &ixgbe_msix_clean_many) |
| for (vector = 0; vector < q_vectors; vector++) { |
| handler = SET_HANDLER(&adapter->q_vector[vector]); |
| sprintf(adapter->name[vector], "%s:v%d-%s", |
| netdev->name, vector, |
| (handler == &ixgbe_msix_clean_rx) ? "Rx" : |
| ((handler == &ixgbe_msix_clean_tx) ? "Tx" : "TxRx")); |
| err = request_irq(adapter->msix_entries[vector].vector, |
| handler, 0, adapter->name[vector], |
| &(adapter->q_vector[vector])); |
| if (err) { |
| DPRINTK(PROBE, ERR, |
| "request_irq failed for MSIX interrupt " |
| "Error: %d\n", err); |
| goto free_queue_irqs; |
| } |
| } |
| |
| sprintf(adapter->name[vector], "%s:lsc", netdev->name); |
| err = request_irq(adapter->msix_entries[vector].vector, |
| &ixgbe_msix_lsc, 0, adapter->name[vector], netdev); |
| if (err) { |
| DPRINTK(PROBE, ERR, |
| "request_irq for msix_lsc failed: %d\n", err); |
| goto free_queue_irqs; |
| } |
| |
| return 0; |
| |
| free_queue_irqs: |
| for (i = vector - 1; i >= 0; i--) |
| free_irq(adapter->msix_entries[--vector].vector, |
| &(adapter->q_vector[i])); |
| adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; |
| pci_disable_msix(adapter->pdev); |
| kfree(adapter->msix_entries); |
| adapter->msix_entries = NULL; |
| out: |
| return err; |
| } |
| |
| static void ixgbe_set_itr(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct ixgbe_q_vector *q_vector = adapter->q_vector; |
| u8 current_itr; |
| u32 new_itr = q_vector->eitr; |
| struct ixgbe_ring *rx_ring = &adapter->rx_ring[0]; |
| struct ixgbe_ring *tx_ring = &adapter->tx_ring[0]; |
| |
| q_vector->tx_eitr = ixgbe_update_itr(adapter, new_itr, |
| q_vector->tx_eitr, |
| tx_ring->total_packets, |
| tx_ring->total_bytes); |
| q_vector->rx_eitr = ixgbe_update_itr(adapter, new_itr, |
| q_vector->rx_eitr, |
| rx_ring->total_packets, |
| rx_ring->total_bytes); |
| |
| current_itr = max(q_vector->rx_eitr, q_vector->tx_eitr); |
| |
| switch (current_itr) { |
| /* counts and packets in update_itr are dependent on these numbers */ |
| case lowest_latency: |
| new_itr = 100000; |
| break; |
| case low_latency: |
| new_itr = 20000; /* aka hwitr = ~200 */ |
| break; |
| case bulk_latency: |
| new_itr = 8000; |
| break; |
| default: |
| break; |
| } |
| |
| if (new_itr != q_vector->eitr) { |
| u32 itr_reg; |
| /* do an exponential smoothing */ |
| new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100); |
| q_vector->eitr = new_itr; |
| itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr); |
| /* must write high and low 16 bits to reset counter */ |
| IXGBE_WRITE_REG(hw, IXGBE_EITR(0), itr_reg | (itr_reg)<<16); |
| } |
| |
| return; |
| } |
| |
| static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter); |
| |
| /** |
| * ixgbe_intr - legacy mode Interrupt Handler |
| * @irq: interrupt number |
| * @data: pointer to a network interface device structure |
| * @pt_regs: CPU registers structure |
| **/ |
| static irqreturn_t ixgbe_intr(int irq, void *data) |
| { |
| struct net_device *netdev = data; |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 eicr; |
| |
| |
| /* for NAPI, using EIAM to auto-mask tx/rx interrupt bits on read |
| * therefore no explict interrupt disable is necessary */ |
| eicr = IXGBE_READ_REG(hw, IXGBE_EICR); |
| if (!eicr) |
| return IRQ_NONE; /* Not our interrupt */ |
| |
| if (eicr & IXGBE_EICR_LSC) { |
| adapter->lsc_int++; |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) |
| mod_timer(&adapter->watchdog_timer, jiffies); |
| } |
| |
| |
| if (netif_rx_schedule_prep(netdev, &adapter->q_vector[0].napi)) { |
| adapter->tx_ring[0].total_packets = 0; |
| adapter->tx_ring[0].total_bytes = 0; |
| adapter->rx_ring[0].total_packets = 0; |
| adapter->rx_ring[0].total_bytes = 0; |
| /* would disable interrupts here but EIAM disabled it */ |
| __netif_rx_schedule(netdev, &adapter->q_vector[0].napi); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static inline void ixgbe_reset_q_vectors(struct ixgbe_adapter *adapter) |
| { |
| int i, q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; |
| |
| for (i = 0; i < q_vectors; i++) { |
| struct ixgbe_q_vector *q_vector = &adapter->q_vector[i]; |
| bitmap_zero(q_vector->rxr_idx, MAX_RX_QUEUES); |
| bitmap_zero(q_vector->txr_idx, MAX_TX_QUEUES); |
| q_vector->rxr_count = 0; |
| q_vector->txr_count = 0; |
| } |
| } |
| |
| /** |
| * ixgbe_request_irq - initialize interrupts |
| * @adapter: board private structure |
| * |
| * Attempts to configure interrupts using the best available |
| * capabilities of the hardware and kernel. |
| **/ |
| static int ixgbe_request_irq(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| int err; |
| |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { |
| err = ixgbe_request_msix_irqs(adapter); |
| } else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) { |
| err = request_irq(adapter->pdev->irq, &ixgbe_intr, 0, |
| netdev->name, netdev); |
| } else { |
| err = request_irq(adapter->pdev->irq, &ixgbe_intr, IRQF_SHARED, |
| netdev->name, netdev); |
| } |
| |
| if (err) |
| DPRINTK(PROBE, ERR, "request_irq failed, Error %d\n", err); |
| |
| return err; |
| } |
| |
| static void ixgbe_free_irq(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { |
| int i, q_vectors; |
| |
| q_vectors = adapter->num_msix_vectors; |
| |
| i = q_vectors - 1; |
| free_irq(adapter->msix_entries[i].vector, netdev); |
| |
| i--; |
| for (; i >= 0; i--) { |
| free_irq(adapter->msix_entries[i].vector, |
| &(adapter->q_vector[i])); |
| } |
| |
| ixgbe_reset_q_vectors(adapter); |
| } else { |
| free_irq(adapter->pdev->irq, netdev); |
| } |
| } |
| |
| /** |
| * ixgbe_irq_disable - Mask off interrupt generation on the NIC |
| * @adapter: board private structure |
| **/ |
| static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter) |
| { |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0); |
| IXGBE_WRITE_FLUSH(&adapter->hw); |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { |
| int i; |
| for (i = 0; i < adapter->num_msix_vectors; i++) |
| synchronize_irq(adapter->msix_entries[i].vector); |
| } else { |
| synchronize_irq(adapter->pdev->irq); |
| } |
| } |
| |
| /** |
| * ixgbe_irq_enable - Enable default interrupt generation settings |
| * @adapter: board private structure |
| **/ |
| static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter) |
| { |
| u32 mask; |
| mask = IXGBE_EIMS_ENABLE_MASK; |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask); |
| IXGBE_WRITE_FLUSH(&adapter->hw); |
| } |
| |
| /** |
| * ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts |
| * |
| **/ |
| static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| IXGBE_WRITE_REG(hw, IXGBE_EITR(0), |
| EITR_INTS_PER_SEC_TO_REG(adapter->rx_eitr)); |
| |
| ixgbe_set_ivar(adapter, IXGBE_IVAR_RX_QUEUE(0), 0); |
| ixgbe_set_ivar(adapter, IXGBE_IVAR_TX_QUEUE(0), 0); |
| |
| map_vector_to_rxq(adapter, 0, 0); |
| map_vector_to_txq(adapter, 0, 0); |
| |
| DPRINTK(HW, INFO, "Legacy interrupt IVAR setup done\n"); |
| } |
| |
| /** |
| * ixgbe_configure_tx - Configure 8254x Transmit Unit after Reset |
| * @adapter: board private structure |
| * |
| * Configure the Tx unit of the MAC after a reset. |
| **/ |
| static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) |
| { |
| u64 tdba; |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 i, j, tdlen, txctrl; |
| |
| /* Setup the HW Tx Head and Tail descriptor pointers */ |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| j = adapter->tx_ring[i].reg_idx; |
| tdba = adapter->tx_ring[i].dma; |
| tdlen = adapter->tx_ring[i].count * |
| sizeof(union ixgbe_adv_tx_desc); |
| IXGBE_WRITE_REG(hw, IXGBE_TDBAL(j), |
| (tdba & DMA_32BIT_MASK)); |
| IXGBE_WRITE_REG(hw, IXGBE_TDBAH(j), (tdba >> 32)); |
| IXGBE_WRITE_REG(hw, IXGBE_TDLEN(j), tdlen); |
| IXGBE_WRITE_REG(hw, IXGBE_TDH(j), 0); |
| IXGBE_WRITE_REG(hw, IXGBE_TDT(j), 0); |
| adapter->tx_ring[i].head = IXGBE_TDH(j); |
| adapter->tx_ring[i].tail = IXGBE_TDT(j); |
| /* Disable Tx Head Writeback RO bit, since this hoses |
| * bookkeeping if things aren't delivered in order. |
| */ |
| txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); |
| txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN; |
| IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), txctrl); |
| } |
| } |
| |
| #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \ |
| (((S) & (PAGE_SIZE - 1)) ? 1 : 0)) |
| |
| #define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2 |
| /** |
| * ixgbe_configure_rx - Configure 8254x Receive Unit after Reset |
| * @adapter: board private structure |
| * |
| * Configure the Rx unit of the MAC after a reset. |
| **/ |
| static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) |
| { |
| u64 rdba; |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct net_device *netdev = adapter->netdev; |
| int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; |
| int i, j; |
| u32 rdlen, rxctrl, rxcsum; |
| u32 random[10]; |
| u32 fctrl, hlreg0; |
| u32 pages; |
| u32 reta = 0, mrqc, srrctl; |
| |
| /* Decide whether to use packet split mode or not */ |
| if (netdev->mtu > ETH_DATA_LEN) |
| adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED; |
| else |
| adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED; |
| |
| /* Set the RX buffer length according to the mode */ |
| if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { |
| adapter->rx_buf_len = IXGBE_RX_HDR_SIZE; |
| } else { |
| if (netdev->mtu <= ETH_DATA_LEN) |
| adapter->rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE; |
| else |
| adapter->rx_buf_len = ALIGN(max_frame, 1024); |
| } |
| |
| fctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL); |
| fctrl |= IXGBE_FCTRL_BAM; |
| fctrl |= IXGBE_FCTRL_DPF; /* discard pause frames when FC enabled */ |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, fctrl); |
| |
| hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); |
| if (adapter->netdev->mtu <= ETH_DATA_LEN) |
| hlreg0 &= ~IXGBE_HLREG0_JUMBOEN; |
| else |
| hlreg0 |= IXGBE_HLREG0_JUMBOEN; |
| IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); |
| |
| pages = PAGE_USE_COUNT(adapter->netdev->mtu); |
| |
| srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(0)); |
| srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK; |
| srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK; |
| |
| if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { |
| srrctl |= PAGE_SIZE >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; |
| srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS; |
| srrctl |= ((IXGBE_RX_HDR_SIZE << |
| IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) & |
| IXGBE_SRRCTL_BSIZEHDR_MASK); |
| } else { |
| srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF; |
| |
| if (adapter->rx_buf_len == MAXIMUM_ETHERNET_VLAN_SIZE) |
| srrctl |= |
| IXGBE_RXBUFFER_2048 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; |
| else |
| srrctl |= |
| adapter->rx_buf_len >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; |
| } |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(0), srrctl); |
| |
| rdlen = adapter->rx_ring[0].count * sizeof(union ixgbe_adv_rx_desc); |
| /* disable receives while setting up the descriptors */ |
| rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); |
| IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN); |
| |
| /* Setup the HW Rx Head and Tail Descriptor Pointers and |
| * the Base and Length of the Rx Descriptor Ring */ |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| rdba = adapter->rx_ring[i].dma; |
| IXGBE_WRITE_REG(hw, IXGBE_RDBAL(i), (rdba & DMA_32BIT_MASK)); |
| IXGBE_WRITE_REG(hw, IXGBE_RDBAH(i), (rdba >> 32)); |
| IXGBE_WRITE_REG(hw, IXGBE_RDLEN(i), rdlen); |
| IXGBE_WRITE_REG(hw, IXGBE_RDH(i), 0); |
| IXGBE_WRITE_REG(hw, IXGBE_RDT(i), 0); |
| adapter->rx_ring[i].head = IXGBE_RDH(i); |
| adapter->rx_ring[i].tail = IXGBE_RDT(i); |
| } |
| |
| if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) { |
| /* Fill out redirection table */ |
| for (i = 0, j = 0; i < 128; i++, j++) { |
| if (j == adapter->ring_feature[RING_F_RSS].indices) |
| j = 0; |
| /* reta = 4-byte sliding window of |
| * 0x00..(indices-1)(indices-1)00..etc. */ |
| reta = (reta << 8) | (j * 0x11); |
| if ((i & 3) == 3) |
| IXGBE_WRITE_REG(hw, IXGBE_RETA(i >> 2), reta); |
| } |
| |
| /* Fill out hash function seeds */ |
| /* XXX use a random constant here to glue certain flows */ |
| get_random_bytes(&random[0], 40); |
| for (i = 0; i < 10; i++) |
| IXGBE_WRITE_REG(hw, IXGBE_RSSRK(i), random[i]); |
| |
| mrqc = IXGBE_MRQC_RSSEN |
| /* Perform hash on these packet types */ |
| | IXGBE_MRQC_RSS_FIELD_IPV4 |
| | IXGBE_MRQC_RSS_FIELD_IPV4_TCP |
| | IXGBE_MRQC_RSS_FIELD_IPV4_UDP |
| | IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP |
| | IXGBE_MRQC_RSS_FIELD_IPV6_EX |
| | IXGBE_MRQC_RSS_FIELD_IPV6 |
| | IXGBE_MRQC_RSS_FIELD_IPV6_TCP |
| | IXGBE_MRQC_RSS_FIELD_IPV6_UDP |
| | IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP; |
| IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc); |
| } |
| |
| rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM); |
| |
| if (adapter->flags & IXGBE_FLAG_RSS_ENABLED || |
| adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED) { |
| /* Disable indicating checksum in descriptor, enables |
| * RSS hash */ |
| rxcsum |= IXGBE_RXCSUM_PCSD; |
| } |
| if (!(rxcsum & IXGBE_RXCSUM_PCSD)) { |
| /* Enable IPv4 payload checksum for UDP fragments |
| * if PCSD is not set */ |
| rxcsum |= IXGBE_RXCSUM_IPPCSE; |
| } |
| |
| IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum); |
| } |
| |
| static void ixgbe_vlan_rx_register(struct net_device *netdev, |
| struct vlan_group *grp) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| u32 ctrl; |
| |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) |
| ixgbe_irq_disable(adapter); |
| adapter->vlgrp = grp; |
| |
| if (grp) { |
| /* enable VLAN tag insert/strip */ |
| ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL); |
| ctrl |= IXGBE_VLNCTRL_VME | IXGBE_VLNCTRL_VFE; |
| ctrl &= ~IXGBE_VLNCTRL_CFIEN; |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl); |
| } |
| |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) |
| ixgbe_irq_enable(adapter); |
| } |
| |
| static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| /* add VID to filter table */ |
| ixgbe_set_vfta(&adapter->hw, vid, 0, true); |
| } |
| |
| static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) |
| ixgbe_irq_disable(adapter); |
| |
| vlan_group_set_device(adapter->vlgrp, vid, NULL); |
| |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) |
| ixgbe_irq_enable(adapter); |
| |
| /* remove VID from filter table */ |
| ixgbe_set_vfta(&adapter->hw, vid, 0, false); |
| } |
| |
| static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter) |
| { |
| ixgbe_vlan_rx_register(adapter->netdev, adapter->vlgrp); |
| |
| if (adapter->vlgrp) { |
| u16 vid; |
| for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) { |
| if (!vlan_group_get_device(adapter->vlgrp, vid)) |
| continue; |
| ixgbe_vlan_rx_add_vid(adapter->netdev, vid); |
| } |
| } |
| } |
| |
| /** |
| * ixgbe_set_multi - Multicast and Promiscuous mode set |
| * @netdev: network interface device structure |
| * |
| * The set_multi entry point is called whenever the multicast address |
| * list or the network interface flags are updated. This routine is |
| * responsible for configuring the hardware for proper multicast, |
| * promiscuous mode, and all-multi behavior. |
| **/ |
| static void ixgbe_set_multi(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct dev_mc_list *mc_ptr; |
| u8 *mta_list; |
| u32 fctrl; |
| int i; |
| |
| /* Check for Promiscuous and All Multicast modes */ |
| |
| fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); |
| |
| if (netdev->flags & IFF_PROMISC) { |
| fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); |
| } else if (netdev->flags & IFF_ALLMULTI) { |
| fctrl |= IXGBE_FCTRL_MPE; |
| fctrl &= ~IXGBE_FCTRL_UPE; |
| } else { |
| fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); |
| } |
| |
| IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); |
| |
| if (netdev->mc_count) { |
| mta_list = kcalloc(netdev->mc_count, ETH_ALEN, GFP_ATOMIC); |
| if (!mta_list) |
| return; |
| |
| /* Shared function expects packed array of only addresses. */ |
| mc_ptr = netdev->mc_list; |
| |
| for (i = 0; i < netdev->mc_count; i++) { |
| if (!mc_ptr) |
| break; |
| memcpy(mta_list + (i * ETH_ALEN), mc_ptr->dmi_addr, |
| ETH_ALEN); |
| mc_ptr = mc_ptr->next; |
| } |
| |
| ixgbe_update_mc_addr_list(hw, mta_list, i, 0); |
| kfree(mta_list); |
| } else { |
| ixgbe_update_mc_addr_list(hw, NULL, 0, 0); |
| } |
| |
| } |
| |
| static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter) |
| { |
| int q_idx; |
| struct ixgbe_q_vector *q_vector; |
| int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; |
| |
| /* legacy and MSI only use one vector */ |
| if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) |
| q_vectors = 1; |
| |
| for (q_idx = 0; q_idx < q_vectors; q_idx++) { |
| q_vector = &adapter->q_vector[q_idx]; |
| if (!q_vector->rxr_count) |
| continue; |
| napi_enable(&q_vector->napi); |
| } |
| } |
| |
| static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter) |
| { |
| int q_idx; |
| struct ixgbe_q_vector *q_vector; |
| int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; |
| |
| /* legacy and MSI only use one vector */ |
| if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) |
| q_vectors = 1; |
| |
| for (q_idx = 0; q_idx < q_vectors; q_idx++) { |
| q_vector = &adapter->q_vector[q_idx]; |
| if (!q_vector->rxr_count) |
| continue; |
| napi_disable(&q_vector->napi); |
| } |
| } |
| |
| static void ixgbe_configure(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| int i; |
| |
| ixgbe_set_multi(netdev); |
| |
| ixgbe_restore_vlan(adapter); |
| |
| ixgbe_configure_tx(adapter); |
| ixgbe_configure_rx(adapter); |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| ixgbe_alloc_rx_buffers(adapter, &adapter->rx_ring[i], |
| (adapter->rx_ring[i].count - 1)); |
| } |
| |
| static int ixgbe_up_complete(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct ixgbe_hw *hw = &adapter->hw; |
| int i, j = 0; |
| int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; |
| u32 txdctl, rxdctl, mhadd; |
| u32 gpie; |
| |
| ixgbe_get_hw_control(adapter); |
| |
| if ((adapter->flags & IXGBE_FLAG_MSIX_ENABLED) || |
| (adapter->flags & IXGBE_FLAG_MSI_ENABLED)) { |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { |
| gpie = (IXGBE_GPIE_MSIX_MODE | IXGBE_GPIE_EIAME | |
| IXGBE_GPIE_PBA_SUPPORT | IXGBE_GPIE_OCD); |
| } else { |
| /* MSI only */ |
| gpie = 0; |
| } |
| /* XXX: to interrupt immediately for EICS writes, enable this */ |
| /* gpie |= IXGBE_GPIE_EIMEN; */ |
| IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie); |
| } |
| |
| if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) { |
| /* legacy interrupts, use EIAM to auto-mask when reading EICR, |
| * specifically only auto mask tx and rx interrupts */ |
| IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE); |
| } |
| |
| mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD); |
| if (max_frame != (mhadd >> IXGBE_MHADD_MFS_SHIFT)) { |
| mhadd &= ~IXGBE_MHADD_MFS_MASK; |
| mhadd |= max_frame << IXGBE_MHADD_MFS_SHIFT; |
| |
| IXGBE_WRITE_REG(hw, IXGBE_MHADD, mhadd); |
| } |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| j = adapter->tx_ring[i].reg_idx; |
| txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j)); |
| txdctl |= IXGBE_TXDCTL_ENABLE; |
| IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(j), txdctl); |
| } |
| |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| j = adapter->rx_ring[i].reg_idx; |
| rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j)); |
| /* enable PTHRESH=32 descriptors (half the internal cache) |
| * and HTHRESH=0 descriptors (to minimize latency on fetch), |
| * this also removes a pesky rx_no_buffer_count increment */ |
| rxdctl |= 0x0020; |
| rxdctl |= IXGBE_RXDCTL_ENABLE; |
| IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), rxdctl); |
| } |
| /* enable all receives */ |
| rxdctl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); |
| rxdctl |= (IXGBE_RXCTRL_DMBYPS | IXGBE_RXCTRL_RXEN); |
| IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxdctl); |
| |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) |
| ixgbe_configure_msix(adapter); |
| else |
| ixgbe_configure_msi_and_legacy(adapter); |
| |
| clear_bit(__IXGBE_DOWN, &adapter->state); |
| ixgbe_napi_enable_all(adapter); |
| |
| /* clear any pending interrupts, may auto mask */ |
| IXGBE_READ_REG(hw, IXGBE_EICR); |
| |
| ixgbe_irq_enable(adapter); |
| |
| /* bring the link up in the watchdog, this could race with our first |
| * link up interrupt but shouldn't be a problem */ |
| mod_timer(&adapter->watchdog_timer, jiffies); |
| return 0; |
| } |
| |
| void ixgbe_reinit_locked(struct ixgbe_adapter *adapter) |
| { |
| WARN_ON(in_interrupt()); |
| while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) |
| msleep(1); |
| ixgbe_down(adapter); |
| ixgbe_up(adapter); |
| clear_bit(__IXGBE_RESETTING, &adapter->state); |
| } |
| |
| int ixgbe_up(struct ixgbe_adapter *adapter) |
| { |
| /* hardware has been reset, we need to reload some things */ |
| ixgbe_configure(adapter); |
| |
| return ixgbe_up_complete(adapter); |
| } |
| |
| void ixgbe_reset(struct ixgbe_adapter *adapter) |
| { |
| if (ixgbe_init_hw(&adapter->hw)) |
| DPRINTK(PROBE, ERR, "Hardware Error\n"); |
| |
| /* reprogram the RAR[0] in case user changed it. */ |
| ixgbe_set_rar(&adapter->hw, 0, adapter->hw.mac.addr, 0, IXGBE_RAH_AV); |
| |
| } |
| |
| #ifdef CONFIG_PM |
| static int ixgbe_resume(struct pci_dev *pdev) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| u32 err; |
| |
| pci_set_power_state(pdev, PCI_D0); |
| pci_restore_state(pdev); |
| err = pci_enable_device(pdev); |
| if (err) { |
| printk(KERN_ERR "ixgbe: Cannot enable PCI device from " \ |
| "suspend\n"); |
| return err; |
| } |
| pci_set_master(pdev); |
| |
| pci_enable_wake(pdev, PCI_D3hot, 0); |
| pci_enable_wake(pdev, PCI_D3cold, 0); |
| |
| if (netif_running(netdev)) { |
| err = ixgbe_request_irq(adapter); |
| if (err) |
| return err; |
| } |
| |
| ixgbe_reset(adapter); |
| |
| if (netif_running(netdev)) |
| ixgbe_up(adapter); |
| |
| netif_device_attach(netdev); |
| |
| return 0; |
| } |
| #endif |
| |
| /** |
| * ixgbe_clean_rx_ring - Free Rx Buffers per Queue |
| * @adapter: board private structure |
| * @rx_ring: ring to free buffers from |
| **/ |
| static void ixgbe_clean_rx_ring(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *rx_ring) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| unsigned long size; |
| unsigned int i; |
| |
| /* Free all the Rx ring sk_buffs */ |
| |
| for (i = 0; i < rx_ring->count; i++) { |
| struct ixgbe_rx_buffer *rx_buffer_info; |
| |
| rx_buffer_info = &rx_ring->rx_buffer_info[i]; |
| if (rx_buffer_info->dma) { |
| pci_unmap_single(pdev, rx_buffer_info->dma, |
| adapter->rx_buf_len, |
| PCI_DMA_FROMDEVICE); |
| rx_buffer_info->dma = 0; |
| } |
| if (rx_buffer_info->skb) { |
| dev_kfree_skb(rx_buffer_info->skb); |
| rx_buffer_info->skb = NULL; |
| } |
| if (!rx_buffer_info->page) |
| continue; |
| pci_unmap_page(pdev, rx_buffer_info->page_dma, PAGE_SIZE, |
| PCI_DMA_FROMDEVICE); |
| rx_buffer_info->page_dma = 0; |
| |
| put_page(rx_buffer_info->page); |
| rx_buffer_info->page = NULL; |
| } |
| |
| size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count; |
| memset(rx_ring->rx_buffer_info, 0, size); |
| |
| /* Zero out the descriptor ring */ |
| memset(rx_ring->desc, 0, rx_ring->size); |
| |
| rx_ring->next_to_clean = 0; |
| rx_ring->next_to_use = 0; |
| |
| writel(0, adapter->hw.hw_addr + rx_ring->head); |
| writel(0, adapter->hw.hw_addr + rx_ring->tail); |
| } |
| |
| /** |
| * ixgbe_clean_tx_ring - Free Tx Buffers |
| * @adapter: board private structure |
| * @tx_ring: ring to be cleaned |
| **/ |
| static void ixgbe_clean_tx_ring(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *tx_ring) |
| { |
| struct ixgbe_tx_buffer *tx_buffer_info; |
| unsigned long size; |
| unsigned int i; |
| |
| /* Free all the Tx ring sk_buffs */ |
| |
| for (i = 0; i < tx_ring->count; i++) { |
| tx_buffer_info = &tx_ring->tx_buffer_info[i]; |
| ixgbe_unmap_and_free_tx_resource(adapter, tx_buffer_info); |
| } |
| |
| size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count; |
| memset(tx_ring->tx_buffer_info, 0, size); |
| |
| /* Zero out the descriptor ring */ |
| memset(tx_ring->desc, 0, tx_ring->size); |
| |
| tx_ring->next_to_use = 0; |
| tx_ring->next_to_clean = 0; |
| |
| writel(0, adapter->hw.hw_addr + tx_ring->head); |
| writel(0, adapter->hw.hw_addr + tx_ring->tail); |
| } |
| |
| /** |
| * ixgbe_clean_all_rx_rings - Free Rx Buffers for all queues |
| * @adapter: board private structure |
| **/ |
| static void ixgbe_clean_all_rx_rings(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| ixgbe_clean_rx_ring(adapter, &adapter->rx_ring[i]); |
| } |
| |
| /** |
| * ixgbe_clean_all_tx_rings - Free Tx Buffers for all queues |
| * @adapter: board private structure |
| **/ |
| static void ixgbe_clean_all_tx_rings(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| ixgbe_clean_tx_ring(adapter, &adapter->tx_ring[i]); |
| } |
| |
| void ixgbe_down(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| u32 rxctrl; |
| |
| /* signal that we are down to the interrupt handler */ |
| set_bit(__IXGBE_DOWN, &adapter->state); |
| |
| /* disable receives */ |
| rxctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXCTRL); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCTRL, |
| rxctrl & ~IXGBE_RXCTRL_RXEN); |
| |
| netif_tx_disable(netdev); |
| |
| /* disable transmits in the hardware */ |
| |
| /* flush both disables */ |
| IXGBE_WRITE_FLUSH(&adapter->hw); |
| msleep(10); |
| |
| ixgbe_irq_disable(adapter); |
| |
| ixgbe_napi_disable_all(adapter); |
| del_timer_sync(&adapter->watchdog_timer); |
| |
| netif_carrier_off(netdev); |
| netif_stop_queue(netdev); |
| |
| if (!pci_channel_offline(adapter->pdev)) |
| ixgbe_reset(adapter); |
| ixgbe_clean_all_tx_rings(adapter); |
| ixgbe_clean_all_rx_rings(adapter); |
| |
| } |
| |
| static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| #ifdef CONFIG_PM |
| int retval = 0; |
| #endif |
| |
| netif_device_detach(netdev); |
| |
| if (netif_running(netdev)) { |
| ixgbe_down(adapter); |
| ixgbe_free_irq(adapter); |
| } |
| |
| #ifdef CONFIG_PM |
| retval = pci_save_state(pdev); |
| if (retval) |
| return retval; |
| #endif |
| |
| pci_enable_wake(pdev, PCI_D3hot, 0); |
| pci_enable_wake(pdev, PCI_D3cold, 0); |
| |
| ixgbe_release_hw_control(adapter); |
| |
| pci_disable_device(pdev); |
| |
| pci_set_power_state(pdev, pci_choose_state(pdev, state)); |
| |
| return 0; |
| } |
| |
| static void ixgbe_shutdown(struct pci_dev *pdev) |
| { |
| ixgbe_suspend(pdev, PMSG_SUSPEND); |
| } |
| |
| /** |
| * ixgbe_poll - NAPI Rx polling callback |
| * @napi: structure for representing this polling device |
| * @budget: how many packets driver is allowed to clean |
| * |
| * This function is used for legacy and MSI, NAPI mode |
| **/ |
| static int ixgbe_poll(struct napi_struct *napi, int budget) |
| { |
| struct ixgbe_q_vector *q_vector = container_of(napi, |
| struct ixgbe_q_vector, napi); |
| struct ixgbe_adapter *adapter = q_vector->adapter; |
| int tx_cleaned = 0, work_done = 0; |
| |
| #ifdef CONFIG_DCA |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { |
| ixgbe_update_tx_dca(adapter, adapter->tx_ring); |
| ixgbe_update_rx_dca(adapter, adapter->rx_ring); |
| } |
| #endif |
| |
| tx_cleaned = ixgbe_clean_tx_irq(adapter, adapter->tx_ring); |
| ixgbe_clean_rx_irq(adapter, adapter->rx_ring, &work_done, budget); |
| |
| if (tx_cleaned) |
| work_done = budget; |
| |
| /* If budget not fully consumed, exit the polling mode */ |
| if (work_done < budget) { |
| netif_rx_complete(adapter->netdev, napi); |
| if (adapter->rx_eitr < IXGBE_MIN_ITR_USECS) |
| ixgbe_set_itr(adapter); |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) |
| ixgbe_irq_enable(adapter); |
| } |
| |
| return work_done; |
| } |
| |
| /** |
| * ixgbe_tx_timeout - Respond to a Tx Hang |
| * @netdev: network interface device structure |
| **/ |
| static void ixgbe_tx_timeout(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| /* Do the reset outside of interrupt context */ |
| schedule_work(&adapter->reset_task); |
| } |
| |
| static void ixgbe_reset_task(struct work_struct *work) |
| { |
| struct ixgbe_adapter *adapter; |
| adapter = container_of(work, struct ixgbe_adapter, reset_task); |
| |
| adapter->tx_timeout_count++; |
| |
| ixgbe_reinit_locked(adapter); |
| } |
| |
| static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter, |
| int vectors) |
| { |
| int err, vector_threshold; |
| |
| /* We'll want at least 3 (vector_threshold): |
| * 1) TxQ[0] Cleanup |
| * 2) RxQ[0] Cleanup |
| * 3) Other (Link Status Change, etc.) |
| * 4) TCP Timer (optional) |
| */ |
| vector_threshold = MIN_MSIX_COUNT; |
| |
| /* The more we get, the more we will assign to Tx/Rx Cleanup |
| * for the separate queues...where Rx Cleanup >= Tx Cleanup. |
| * Right now, we simply care about how many we'll get; we'll |
| * set them up later while requesting irq's. |
| */ |
| while (vectors >= vector_threshold) { |
| err = pci_enable_msix(adapter->pdev, adapter->msix_entries, |
| vectors); |
| if (!err) /* Success in acquiring all requested vectors. */ |
| break; |
| else if (err < 0) |
| vectors = 0; /* Nasty failure, quit now */ |
| else /* err == number of vectors we should try again with */ |
| vectors = err; |
| } |
| |
| if (vectors < vector_threshold) { |
| /* Can't allocate enough MSI-X interrupts? Oh well. |
| * This just means we'll go with either a single MSI |
| * vector or fall back to legacy interrupts. |
| */ |
| DPRINTK(HW, DEBUG, "Unable to allocate MSI-X interrupts\n"); |
| adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; |
| kfree(adapter->msix_entries); |
| adapter->msix_entries = NULL; |
| adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED; |
| adapter->num_tx_queues = 1; |
| adapter->num_rx_queues = 1; |
| } else { |
| adapter->flags |= IXGBE_FLAG_MSIX_ENABLED; /* Woot! */ |
| adapter->num_msix_vectors = vectors; |
| } |
| } |
| |
| static void __devinit ixgbe_set_num_queues(struct ixgbe_adapter *adapter) |
| { |
| int nrq, ntq; |
| int feature_mask = 0, rss_i, rss_m; |
| |
| /* Number of supported queues */ |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82598EB: |
| rss_i = adapter->ring_feature[RING_F_RSS].indices; |
| rss_m = 0; |
| feature_mask |= IXGBE_FLAG_RSS_ENABLED; |
| |
| switch (adapter->flags & feature_mask) { |
| case (IXGBE_FLAG_RSS_ENABLED): |
| rss_m = 0xF; |
| nrq = rss_i; |
| #ifdef CONFIG_NETDEVICES_MULTIQUEUE |
| ntq = rss_i; |
| #else |
| ntq = 1; |
| #endif |
| break; |
| case 0: |
| default: |
| rss_i = 0; |
| rss_m = 0; |
| nrq = 1; |
| ntq = 1; |
| break; |
| } |
| |
| adapter->ring_feature[RING_F_RSS].indices = rss_i; |
| adapter->ring_feature[RING_F_RSS].mask = rss_m; |
| break; |
| default: |
| nrq = 1; |
| ntq = 1; |
| break; |
| } |
| |
| adapter->num_rx_queues = nrq; |
| adapter->num_tx_queues = ntq; |
| } |
| |
| /** |
| * ixgbe_cache_ring_register - Descriptor ring to register mapping |
| * @adapter: board private structure to initialize |
| * |
| * Once we know the feature-set enabled for the device, we'll cache |
| * the register offset the descriptor ring is assigned to. |
| **/ |
| static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) |
| { |
| /* TODO: Remove all uses of the indices in the cases where multiple |
| * features are OR'd together, if the feature set makes sense. |
| */ |
| int feature_mask = 0, rss_i; |
| int i, txr_idx, rxr_idx; |
| |
| /* Number of supported queues */ |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82598EB: |
| rss_i = adapter->ring_feature[RING_F_RSS].indices; |
| txr_idx = 0; |
| rxr_idx = 0; |
| feature_mask |= IXGBE_FLAG_RSS_ENABLED; |
| switch (adapter->flags & feature_mask) { |
| case (IXGBE_FLAG_RSS_ENABLED): |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| adapter->rx_ring[i].reg_idx = i; |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| adapter->tx_ring[i].reg_idx = i; |
| break; |
| case 0: |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /** |
| * ixgbe_alloc_queues - Allocate memory for all rings |
| * @adapter: board private structure to initialize |
| * |
| * We allocate one ring per queue at run-time since we don't know the |
| * number of queues at compile-time. The polling_netdev array is |
| * intended for Multiqueue, but should work fine with a single queue. |
| **/ |
| static int __devinit ixgbe_alloc_queues(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| |
| adapter->tx_ring = kcalloc(adapter->num_tx_queues, |
| sizeof(struct ixgbe_ring), GFP_KERNEL); |
| if (!adapter->tx_ring) |
| goto err_tx_ring_allocation; |
| |
| adapter->rx_ring = kcalloc(adapter->num_rx_queues, |
| sizeof(struct ixgbe_ring), GFP_KERNEL); |
| if (!adapter->rx_ring) |
| goto err_rx_ring_allocation; |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| adapter->tx_ring[i].count = IXGBE_DEFAULT_TXD; |
| adapter->tx_ring[i].queue_index = i; |
| } |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| adapter->rx_ring[i].count = IXGBE_DEFAULT_RXD; |
| adapter->rx_ring[i].queue_index = i; |
| } |
| |
| ixgbe_cache_ring_register(adapter); |
| |
| return 0; |
| |
| err_rx_ring_allocation: |
| kfree(adapter->tx_ring); |
| err_tx_ring_allocation: |
| return -ENOMEM; |
| } |
| |
| /** |
| * ixgbe_set_interrupt_capability - set MSI-X or MSI if supported |
| * @adapter: board private structure to initialize |
| * |
| * Attempt to configure the interrupts using the best available |
| * capabilities of the hardware and the kernel. |
| **/ |
| static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter |
| *adapter) |
| { |
| int err = 0; |
| int vector, v_budget; |
| |
| /* |
| * It's easy to be greedy for MSI-X vectors, but it really |
| * doesn't do us much good if we have a lot more vectors |
| * than CPU's. So let's be conservative and only ask for |
| * (roughly) twice the number of vectors as there are CPU's. |
| */ |
| v_budget = min(adapter->num_rx_queues + adapter->num_tx_queues, |
| (int)(num_online_cpus() * 2)) + NON_Q_VECTORS; |
| |
| /* |
| * At the same time, hardware can only support a maximum of |
| * MAX_MSIX_COUNT vectors. With features such as RSS and VMDq, |
| * we can easily reach upwards of 64 Rx descriptor queues and |
| * 32 Tx queues. Thus, we cap it off in those rare cases where |
| * the cpu count also exceeds our vector limit. |
| */ |
| v_budget = min(v_budget, MAX_MSIX_COUNT); |
| |
| /* A failure in MSI-X entry allocation isn't fatal, but it does |
| * mean we disable MSI-X capabilities of the adapter. */ |
| adapter->msix_entries = kcalloc(v_budget, |
| sizeof(struct msix_entry), GFP_KERNEL); |
| if (!adapter->msix_entries) { |
| adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED; |
| ixgbe_set_num_queues(adapter); |
| kfree(adapter->tx_ring); |
| kfree(adapter->rx_ring); |
| err = ixgbe_alloc_queues(adapter); |
| if (err) { |
| DPRINTK(PROBE, ERR, "Unable to allocate memory " |
| "for queues\n"); |
| goto out; |
| } |
| |
| goto try_msi; |
| } |
| |
| for (vector = 0; vector < v_budget; vector++) |
| adapter->msix_entries[vector].entry = vector; |
| |
| ixgbe_acquire_msix_vectors(adapter, v_budget); |
| |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) |
| goto out; |
| |
| try_msi: |
| err = pci_enable_msi(adapter->pdev); |
| if (!err) { |
| adapter->flags |= IXGBE_FLAG_MSI_ENABLED; |
| } else { |
| DPRINTK(HW, DEBUG, "Unable to allocate MSI interrupt, " |
| "falling back to legacy. Error: %d\n", err); |
| /* reset err */ |
| err = 0; |
| } |
| |
| out: |
| #ifdef CONFIG_NETDEVICES_MULTIQUEUE |
| /* Notify the stack of the (possibly) reduced Tx Queue count. */ |
| adapter->netdev->egress_subqueue_count = adapter->num_tx_queues; |
| #endif |
| |
| return err; |
| } |
| |
| static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter) |
| { |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { |
| adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; |
| pci_disable_msix(adapter->pdev); |
| kfree(adapter->msix_entries); |
| adapter->msix_entries = NULL; |
| } else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) { |
| adapter->flags &= ~IXGBE_FLAG_MSI_ENABLED; |
| pci_disable_msi(adapter->pdev); |
| } |
| return; |
| } |
| |
| /** |
| * ixgbe_init_interrupt_scheme - Determine proper interrupt scheme |
| * @adapter: board private structure to initialize |
| * |
| * We determine which interrupt scheme to use based on... |
| * - Kernel support (MSI, MSI-X) |
| * - which can be user-defined (via MODULE_PARAM) |
| * - Hardware queue count (num_*_queues) |
| * - defined by miscellaneous hardware support/features (RSS, etc.) |
| **/ |
| static int __devinit ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter) |
| { |
| int err; |
| |
| /* Number of supported queues */ |
| ixgbe_set_num_queues(adapter); |
| |
| err = ixgbe_alloc_queues(adapter); |
| if (err) { |
| DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n"); |
| goto err_alloc_queues; |
| } |
| |
| err = ixgbe_set_interrupt_capability(adapter); |
| if (err) { |
| DPRINTK(PROBE, ERR, "Unable to setup interrupt capabilities\n"); |
| goto err_set_interrupt; |
| } |
| |
| DPRINTK(DRV, INFO, "Multiqueue %s: Rx Queue count = %u, " |
| "Tx Queue count = %u\n", |
| (adapter->num_rx_queues > 1) ? "Enabled" : |
| "Disabled", adapter->num_rx_queues, adapter->num_tx_queues); |
| |
| set_bit(__IXGBE_DOWN, &adapter->state); |
| |
| return 0; |
| |
| err_set_interrupt: |
| kfree(adapter->tx_ring); |
| kfree(adapter->rx_ring); |
| err_alloc_queues: |
| return err; |
| } |
| |
| /** |
| * ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter) |
| * @adapter: board private structure to initialize |
| * |
| * ixgbe_sw_init initializes the Adapter private data structure. |
| * Fields are initialized based on PCI device information and |
| * OS network device settings (MTU size). |
| **/ |
| static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct pci_dev *pdev = adapter->pdev; |
| unsigned int rss; |
| |
| /* Set capability flags */ |
| rss = min(IXGBE_MAX_RSS_INDICES, (int)num_online_cpus()); |
| adapter->ring_feature[RING_F_RSS].indices = rss; |
| adapter->flags |= IXGBE_FLAG_RSS_ENABLED; |
| |
| /* Enable Dynamic interrupt throttling by default */ |
| adapter->rx_eitr = 1; |
| adapter->tx_eitr = 1; |
| |
| /* default flow control settings */ |
| hw->fc.original_type = ixgbe_fc_full; |
| hw->fc.type = ixgbe_fc_full; |
| |
| /* select 10G link by default */ |
| hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN; |
| if (hw->mac.ops.reset(hw)) { |
| dev_err(&pdev->dev, "HW Init failed\n"); |
| return -EIO; |
| } |
| if (hw->mac.ops.setup_link_speed(hw, IXGBE_LINK_SPEED_10GB_FULL, true, |
| false)) { |
| dev_err(&pdev->dev, "Link Speed setup failed\n"); |
| return -EIO; |
| } |
| |
| /* initialize eeprom parameters */ |
| if (ixgbe_init_eeprom(hw)) { |
| dev_err(&pdev->dev, "EEPROM initialization failed\n"); |
| return -EIO; |
| } |
| |
| /* enable rx csum by default */ |
| adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED; |
| |
| set_bit(__IXGBE_DOWN, &adapter->state); |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_setup_tx_resources - allocate Tx resources (Descriptors) |
| * @adapter: board private structure |
| * @txdr: tx descriptor ring (for a specific queue) to setup |
| * |
| * Return 0 on success, negative on failure |
| **/ |
| int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *txdr) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| int size; |
| |
| size = sizeof(struct ixgbe_tx_buffer) * txdr->count; |
| txdr->tx_buffer_info = vmalloc(size); |
| if (!txdr->tx_buffer_info) { |
| DPRINTK(PROBE, ERR, |
| "Unable to allocate memory for the transmit descriptor ring\n"); |
| return -ENOMEM; |
| } |
| memset(txdr->tx_buffer_info, 0, size); |
| |
| /* round up to nearest 4K */ |
| txdr->size = txdr->count * sizeof(union ixgbe_adv_tx_desc); |
| txdr->size = ALIGN(txdr->size, 4096); |
| |
| txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma); |
| if (!txdr->desc) { |
| vfree(txdr->tx_buffer_info); |
| DPRINTK(PROBE, ERR, |
| "Memory allocation failed for the tx desc ring\n"); |
| return -ENOMEM; |
| } |
| |
| txdr->next_to_use = 0; |
| txdr->next_to_clean = 0; |
| txdr->work_limit = txdr->count; |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_setup_rx_resources - allocate Rx resources (Descriptors) |
| * @adapter: board private structure |
| * @rxdr: rx descriptor ring (for a specific queue) to setup |
| * |
| * Returns 0 on success, negative on failure |
| **/ |
| int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *rxdr) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| int size; |
| |
| size = sizeof(struct ixgbe_rx_buffer) * rxdr->count; |
| rxdr->rx_buffer_info = vmalloc(size); |
| if (!rxdr->rx_buffer_info) { |
| DPRINTK(PROBE, ERR, |
| "vmalloc allocation failed for the rx desc ring\n"); |
| return -ENOMEM; |
| } |
| memset(rxdr->rx_buffer_info, 0, size); |
| |
| /* Round up to nearest 4K */ |
| rxdr->size = rxdr->count * sizeof(union ixgbe_adv_rx_desc); |
| rxdr->size = ALIGN(rxdr->size, 4096); |
| |
| rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma); |
| |
| if (!rxdr->desc) { |
| DPRINTK(PROBE, ERR, |
| "Memory allocation failed for the rx desc ring\n"); |
| vfree(rxdr->rx_buffer_info); |
| return -ENOMEM; |
| } |
| |
| rxdr->next_to_clean = 0; |
| rxdr->next_to_use = 0; |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_free_tx_resources - Free Tx Resources per Queue |
| * @adapter: board private structure |
| * @tx_ring: Tx descriptor ring for a specific queue |
| * |
| * Free all transmit software resources |
| **/ |
| static void ixgbe_free_tx_resources(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *tx_ring) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| |
| ixgbe_clean_tx_ring(adapter, tx_ring); |
| |
| vfree(tx_ring->tx_buffer_info); |
| tx_ring->tx_buffer_info = NULL; |
| |
| pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma); |
| |
| tx_ring->desc = NULL; |
| } |
| |
| /** |
| * ixgbe_free_all_tx_resources - Free Tx Resources for All Queues |
| * @adapter: board private structure |
| * |
| * Free all transmit software resources |
| **/ |
| static void ixgbe_free_all_tx_resources(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| ixgbe_free_tx_resources(adapter, &adapter->tx_ring[i]); |
| } |
| |
| /** |
| * ixgbe_free_rx_resources - Free Rx Resources |
| * @adapter: board private structure |
| * @rx_ring: ring to clean the resources from |
| * |
| * Free all receive software resources |
| **/ |
| static void ixgbe_free_rx_resources(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *rx_ring) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| |
| ixgbe_clean_rx_ring(adapter, rx_ring); |
| |
| vfree(rx_ring->rx_buffer_info); |
| rx_ring->rx_buffer_info = NULL; |
| |
| pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma); |
| |
| rx_ring->desc = NULL; |
| } |
| |
| /** |
| * ixgbe_free_all_rx_resources - Free Rx Resources for All Queues |
| * @adapter: board private structure |
| * |
| * Free all receive software resources |
| **/ |
| static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| ixgbe_free_rx_resources(adapter, &adapter->rx_ring[i]); |
| } |
| |
| /** |
| * ixgbe_setup_all_tx_resources - allocate all queues Tx resources |
| * @adapter: board private structure |
| * |
| * If this function returns with an error, then it's possible one or |
| * more of the rings is populated (while the rest are not). It is the |
| * callers duty to clean those orphaned rings. |
| * |
| * Return 0 on success, negative on failure |
| **/ |
| static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter) |
| { |
| int i, err = 0; |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| err = ixgbe_setup_tx_resources(adapter, &adapter->tx_ring[i]); |
| if (err) { |
| DPRINTK(PROBE, ERR, |
| "Allocation for Tx Queue %u failed\n", i); |
| break; |
| } |
| } |
| |
| return err; |
| } |
| |
| /** |
| * ixgbe_setup_all_rx_resources - allocate all queues Rx resources |
| * @adapter: board private structure |
| * |
| * If this function returns with an error, then it's possible one or |
| * more of the rings is populated (while the rest are not). It is the |
| * callers duty to clean those orphaned rings. |
| * |
| * Return 0 on success, negative on failure |
| **/ |
| |
| static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter) |
| { |
| int i, err = 0; |
| |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| err = ixgbe_setup_rx_resources(adapter, &adapter->rx_ring[i]); |
| if (err) { |
| DPRINTK(PROBE, ERR, |
| "Allocation for Rx Queue %u failed\n", i); |
| break; |
| } |
| } |
| |
| return err; |
| } |
| |
| /** |
| * ixgbe_change_mtu - Change the Maximum Transfer Unit |
| * @netdev: network interface device structure |
| * @new_mtu: new value for maximum frame size |
| * |
| * Returns 0 on success, negative on failure |
| **/ |
| static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; |
| |
| if ((max_frame < (ETH_ZLEN + ETH_FCS_LEN)) || |
| (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) |
| return -EINVAL; |
| |
| DPRINTK(PROBE, INFO, "changing MTU from %d to %d\n", |
| netdev->mtu, new_mtu); |
| /* must set new MTU before calling down or up */ |
| netdev->mtu = new_mtu; |
| |
| if (netif_running(netdev)) |
| ixgbe_reinit_locked(adapter); |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_open - Called when a network interface is made active |
| * @netdev: network interface device structure |
| * |
| * Returns 0 on success, negative value on failure |
| * |
| * The open entry point is called when a network interface is made |
| * active by the system (IFF_UP). At this point all resources needed |
| * for transmit and receive operations are allocated, the interrupt |
| * handler is registered with the OS, the watchdog timer is started, |
| * and the stack is notified that the interface is ready. |
| **/ |
| static int ixgbe_open(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| int err; |
| |
| /* disallow open during test */ |
| if (test_bit(__IXGBE_TESTING, &adapter->state)) |
| return -EBUSY; |
| |
| /* allocate transmit descriptors */ |
| err = ixgbe_setup_all_tx_resources(adapter); |
| if (err) |
| goto err_setup_tx; |
| |
| /* allocate receive descriptors */ |
| err = ixgbe_setup_all_rx_resources(adapter); |
| if (err) |
| goto err_setup_rx; |
| |
| ixgbe_configure(adapter); |
| |
| err = ixgbe_request_irq(adapter); |
| if (err) |
| goto err_req_irq; |
| |
| err = ixgbe_up_complete(adapter); |
| if (err) |
| goto err_up; |
| |
| return 0; |
| |
| err_up: |
| ixgbe_release_hw_control(adapter); |
| ixgbe_free_irq(adapter); |
| err_req_irq: |
| ixgbe_free_all_rx_resources(adapter); |
| err_setup_rx: |
| ixgbe_free_all_tx_resources(adapter); |
| err_setup_tx: |
| ixgbe_reset(adapter); |
| |
| return err; |
| } |
| |
| /** |
| * ixgbe_close - Disables a network interface |
| * @netdev: network interface device structure |
| * |
| * Returns 0, this is not allowed to fail |
| * |
| * The close entry point is called when an interface is de-activated |
| * by the OS. The hardware is still under the drivers control, but |
| * needs to be disabled. A global MAC reset is issued to stop the |
| * hardware, and all transmit and receive resources are freed. |
| **/ |
| static int ixgbe_close(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| ixgbe_down(adapter); |
| ixgbe_free_irq(adapter); |
| |
| ixgbe_free_all_tx_resources(adapter); |
| ixgbe_free_all_rx_resources(adapter); |
| |
| ixgbe_release_hw_control(adapter); |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_update_stats - Update the board statistics counters. |
| * @adapter: board private structure |
| **/ |
| void ixgbe_update_stats(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u64 total_mpc = 0; |
| u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot; |
| |
| adapter->stats.crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS); |
| for (i = 0; i < 8; i++) { |
| /* for packet buffers not used, the register should read 0 */ |
| mpc = IXGBE_READ_REG(hw, IXGBE_MPC(i)); |
| missed_rx += mpc; |
| adapter->stats.mpc[i] += mpc; |
| total_mpc += adapter->stats.mpc[i]; |
| adapter->stats.rnbc[i] += IXGBE_READ_REG(hw, IXGBE_RNBC(i)); |
| } |
| adapter->stats.gprc += IXGBE_READ_REG(hw, IXGBE_GPRC); |
| /* work around hardware counting issue */ |
| adapter->stats.gprc -= missed_rx; |
| |
| /* 82598 hardware only has a 32 bit counter in the high register */ |
| adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GORCH); |
| adapter->stats.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH); |
| adapter->stats.tor += IXGBE_READ_REG(hw, IXGBE_TORH); |
| bprc = IXGBE_READ_REG(hw, IXGBE_BPRC); |
| adapter->stats.bprc += bprc; |
| adapter->stats.mprc += IXGBE_READ_REG(hw, IXGBE_MPRC); |
| adapter->stats.mprc -= bprc; |
| adapter->stats.roc += IXGBE_READ_REG(hw, IXGBE_ROC); |
| adapter->stats.prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64); |
| adapter->stats.prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127); |
| adapter->stats.prc255 += IXGBE_READ_REG(hw, IXGBE_PRC255); |
| adapter->stats.prc511 += IXGBE_READ_REG(hw, IXGBE_PRC511); |
| adapter->stats.prc1023 += IXGBE_READ_REG(hw, IXGBE_PRC1023); |
| adapter->stats.prc1522 += IXGBE_READ_REG(hw, IXGBE_PRC1522); |
| adapter->stats.rlec += IXGBE_READ_REG(hw, IXGBE_RLEC); |
| adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC); |
| adapter->stats.lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); |
| lxon = IXGBE_READ_REG(hw, IXGBE_LXONTXC); |
| adapter->stats.lxontxc += lxon; |
| lxoff = IXGBE_READ_REG(hw, IXGBE_LXOFFTXC); |
| adapter->stats.lxofftxc += lxoff; |
| adapter->stats.ruc += IXGBE_READ_REG(hw, IXGBE_RUC); |
| adapter->stats.gptc += IXGBE_READ_REG(hw, IXGBE_GPTC); |
| adapter->stats.mptc += IXGBE_READ_REG(hw, IXGBE_MPTC); |
| /* |
| * 82598 errata - tx of flow control packets is included in tx counters |
| */ |
| xon_off_tot = lxon + lxoff; |
| adapter->stats.gptc -= xon_off_tot; |
| adapter->stats.mptc -= xon_off_tot; |
| adapter->stats.gotc -= (xon_off_tot * (ETH_ZLEN + ETH_FCS_LEN)); |
| adapter->stats.ruc += IXGBE_READ_REG(hw, IXGBE_RUC); |
| adapter->stats.rfc += IXGBE_READ_REG(hw, IXGBE_RFC); |
| adapter->stats.rjc += IXGBE_READ_REG(hw, IXGBE_RJC); |
| adapter->stats.tpr += IXGBE_READ_REG(hw, IXGBE_TPR); |
| adapter->stats.ptc64 += IXGBE_READ_REG(hw, IXGBE_PTC64); |
| adapter->stats.ptc64 -= xon_off_tot; |
| adapter->stats.ptc127 += IXGBE_READ_REG(hw, IXGBE_PTC127); |
| adapter->stats.ptc255 += IXGBE_READ_REG(hw, IXGBE_PTC255); |
| adapter->stats.ptc511 += IXGBE_READ_REG(hw, IXGBE_PTC511); |
| adapter->stats.ptc1023 += IXGBE_READ_REG(hw, IXGBE_PTC1023); |
| adapter->stats.ptc1522 += IXGBE_READ_REG(hw, IXGBE_PTC1522); |
| adapter->stats.bptc += IXGBE_READ_REG(hw, IXGBE_BPTC); |
| |
| /* Fill out the OS statistics structure */ |
| adapter->net_stats.multicast = adapter->stats.mprc; |
| |
| /* Rx Errors */ |
| adapter->net_stats.rx_errors = adapter->stats.crcerrs + |
| adapter->stats.rlec; |
| adapter->net_stats.rx_dropped = 0; |
| adapter->net_stats.rx_length_errors = adapter->stats.rlec; |
| adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs; |
| adapter->net_stats.rx_missed_errors = total_mpc; |
| } |
| |
| /** |
| * ixgbe_watchdog - Timer Call-back |
| * @data: pointer to adapter cast into an unsigned long |
| **/ |
| static void ixgbe_watchdog(unsigned long data) |
| { |
| struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data; |
| struct net_device *netdev = adapter->netdev; |
| bool link_up; |
| u32 link_speed = 0; |
| #ifdef CONFIG_NETDEVICES_MULTIQUEUE |
| int i; |
| #endif |
| |
| adapter->hw.mac.ops.check_link(&adapter->hw, &(link_speed), &link_up); |
| |
| if (link_up) { |
| if (!netif_carrier_ok(netdev)) { |
| u32 frctl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL); |
| u32 rmcs = IXGBE_READ_REG(&adapter->hw, IXGBE_RMCS); |
| #define FLOW_RX (frctl & IXGBE_FCTRL_RFCE) |
| #define FLOW_TX (rmcs & IXGBE_RMCS_TFCE_802_3X) |
| DPRINTK(LINK, INFO, "NIC Link is Up %s, " |
| "Flow Control: %s\n", |
| (link_speed == IXGBE_LINK_SPEED_10GB_FULL ? |
| "10 Gbps" : |
| (link_speed == IXGBE_LINK_SPEED_1GB_FULL ? |
| "1 Gbps" : "unknown speed")), |
| ((FLOW_RX && FLOW_TX) ? "RX/TX" : |
| (FLOW_RX ? "RX" : |
| (FLOW_TX ? "TX" : "None")))); |
| |
| netif_carrier_on(netdev); |
| netif_wake_queue(netdev); |
| #ifdef CONFIG_NETDEVICES_MULTIQUEUE |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| netif_wake_subqueue(netdev, i); |
| #endif |
| } else { |
| /* Force detection of hung controller */ |
| adapter->detect_tx_hung = true; |
| } |
| } else { |
| if (netif_carrier_ok(netdev)) { |
| DPRINTK(LINK, INFO, "NIC Link is Down\n"); |
| netif_carrier_off(netdev); |
| netif_stop_queue(netdev); |
| } |
| } |
| |
| ixgbe_update_stats(adapter); |
| |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) { |
| /* Cause software interrupt to ensure rx rings are cleaned */ |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { |
| u32 eics = |
| (1 << (adapter->num_msix_vectors - NON_Q_VECTORS)) - 1; |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, eics); |
| } else { |
| /* for legacy and MSI interrupts don't set any bits that |
| * are enabled for EIAM, because this operation would |
| * set *both* EIMS and EICS for any bit in EIAM */ |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, |
| (IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER)); |
| } |
| /* Reset the timer */ |
| mod_timer(&adapter->watchdog_timer, |
| round_jiffies(jiffies + 2 * HZ)); |
| } |
| } |
| |
| static int ixgbe_tso(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *tx_ring, struct sk_buff *skb, |
| u32 tx_flags, u8 *hdr_len) |
| { |
| struct ixgbe_adv_tx_context_desc *context_desc; |
| unsigned int i; |
| int err; |
| struct ixgbe_tx_buffer *tx_buffer_info; |
| u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0; |
| u32 mss_l4len_idx = 0, l4len; |
| |
| if (skb_is_gso(skb)) { |
| if (skb_header_cloned(skb)) { |
| err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); |
| if (err) |
| return err; |
| } |
| l4len = tcp_hdrlen(skb); |
| *hdr_len += l4len; |
| |
| if (skb->protocol == htons(ETH_P_IP)) { |
| struct iphdr *iph = ip_hdr(skb); |
| iph->tot_len = 0; |
| iph->check = 0; |
| tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, |
| iph->daddr, 0, |
| IPPROTO_TCP, |
| 0); |
| adapter->hw_tso_ctxt++; |
| } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) { |
| ipv6_hdr(skb)->payload_len = 0; |
| tcp_hdr(skb)->check = |
| ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, |
| &ipv6_hdr(skb)->daddr, |
| 0, IPPROTO_TCP, 0); |
| adapter->hw_tso6_ctxt++; |
| } |
| |
| i = tx_ring->next_to_use; |
| |
| tx_buffer_info = &tx_ring->tx_buffer_info[i]; |
| context_desc = IXGBE_TX_CTXTDESC_ADV(*tx_ring, i); |
| |
| /* VLAN MACLEN IPLEN */ |
| if (tx_flags & IXGBE_TX_FLAGS_VLAN) |
| vlan_macip_lens |= |
| (tx_flags & IXGBE_TX_FLAGS_VLAN_MASK); |
| vlan_macip_lens |= ((skb_network_offset(skb)) << |
| IXGBE_ADVTXD_MACLEN_SHIFT); |
| *hdr_len += skb_network_offset(skb); |
| vlan_macip_lens |= |
| (skb_transport_header(skb) - skb_network_header(skb)); |
| *hdr_len += |
| (skb_transport_header(skb) - skb_network_header(skb)); |
| context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens); |
| context_desc->seqnum_seed = 0; |
| |
| /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ |
| type_tucmd_mlhl |= (IXGBE_TXD_CMD_DEXT | |
| IXGBE_ADVTXD_DTYP_CTXT); |
| |
| if (skb->protocol == htons(ETH_P_IP)) |
| type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4; |
| type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP; |
| context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl); |
| |
| /* MSS L4LEN IDX */ |
| mss_l4len_idx |= |
| (skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT); |
| mss_l4len_idx |= (l4len << IXGBE_ADVTXD_L4LEN_SHIFT); |
| context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx); |
| |
| tx_buffer_info->time_stamp = jiffies; |
| tx_buffer_info->next_to_watch = i; |
| |
| i++; |
| if (i == tx_ring->count) |
| i = 0; |
| tx_ring->next_to_use = i; |
| |
| return true; |
| } |
| return false; |
| } |
| |
| static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *tx_ring, |
| struct sk_buff *skb, u32 tx_flags) |
| { |
| struct ixgbe_adv_tx_context_desc *context_desc; |
| unsigned int i; |
| struct ixgbe_tx_buffer *tx_buffer_info; |
| u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0; |
| |
| if (skb->ip_summed == CHECKSUM_PARTIAL || |
| (tx_flags & IXGBE_TX_FLAGS_VLAN)) { |
| i = tx_ring->next_to_use; |
| tx_buffer_info = &tx_ring->tx_buffer_info[i]; |
| context_desc = IXGBE_TX_CTXTDESC_ADV(*tx_ring, i); |
| |
| if (tx_flags & IXGBE_TX_FLAGS_VLAN) |
| vlan_macip_lens |= |
| (tx_flags & IXGBE_TX_FLAGS_VLAN_MASK); |
| vlan_macip_lens |= (skb_network_offset(skb) << |
| IXGBE_ADVTXD_MACLEN_SHIFT); |
| if (skb->ip_summed == CHECKSUM_PARTIAL) |
| vlan_macip_lens |= (skb_transport_header(skb) - |
| skb_network_header(skb)); |
| |
| context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens); |
| context_desc->seqnum_seed = 0; |
| |
| type_tucmd_mlhl |= (IXGBE_TXD_CMD_DEXT | |
| IXGBE_ADVTXD_DTYP_CTXT); |
| |
| if (skb->ip_summed == CHECKSUM_PARTIAL) { |
| switch (skb->protocol) { |
| case __constant_htons(ETH_P_IP): |
| type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4; |
| if (ip_hdr(skb)->protocol == IPPROTO_TCP) |
| type_tucmd_mlhl |= |
| IXGBE_ADVTXD_TUCMD_L4T_TCP; |
| break; |
| |
| case __constant_htons(ETH_P_IPV6): |
| /* XXX what about other V6 headers?? */ |
| if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) |
| type_tucmd_mlhl |= |
| IXGBE_ADVTXD_TUCMD_L4T_TCP; |
| break; |
| |
| default: |
| if (unlikely(net_ratelimit())) { |
| DPRINTK(PROBE, WARNING, |
| "partial checksum but proto=%x!\n", |
| skb->protocol); |
| } |
| break; |
| } |
| } |
| |
| context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl); |
| context_desc->mss_l4len_idx = 0; |
| |
| tx_buffer_info->time_stamp = jiffies; |
| tx_buffer_info->next_to_watch = i; |
| adapter->hw_csum_tx_good++; |
| i++; |
| if (i == tx_ring->count) |
| i = 0; |
| tx_ring->next_to_use = i; |
| |
| return true; |
| } |
| return false; |
| } |
| |
| static int ixgbe_tx_map(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *tx_ring, |
| struct sk_buff *skb, unsigned int first) |
| { |
| struct ixgbe_tx_buffer *tx_buffer_info; |
| unsigned int len = skb->len; |
| unsigned int offset = 0, size, count = 0, i; |
| unsigned int nr_frags = skb_shinfo(skb)->nr_frags; |
| unsigned int f; |
| |
| len -= skb->data_len; |
| |
| i = tx_ring->next_to_use; |
| |
| while (len) { |
| tx_buffer_info = &tx_ring->tx_buffer_info[i]; |
| size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD); |
| |
| tx_buffer_info->length = size; |
| tx_buffer_info->dma = pci_map_single(adapter->pdev, |
| skb->data + offset, |
| size, PCI_DMA_TODEVICE); |
| tx_buffer_info->time_stamp = jiffies; |
| tx_buffer_info->next_to_watch = i; |
| |
| len -= size; |
| offset += size; |
| count++; |
| i++; |
| if (i == tx_ring->count) |
| i = 0; |
| } |
| |
| for (f = 0; f < nr_frags; f++) { |
| struct skb_frag_struct *frag; |
| |
| frag = &skb_shinfo(skb)->frags[f]; |
| len = frag->size; |
| offset = frag->page_offset; |
| |
| while (len) { |
| tx_buffer_info = &tx_ring->tx_buffer_info[i]; |
| size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD); |
| |
| tx_buffer_info->length = size; |
| tx_buffer_info->dma = pci_map_page(adapter->pdev, |
| frag->page, |
| offset, |
| size, PCI_DMA_TODEVICE); |
| tx_buffer_info->time_stamp = jiffies; |
| tx_buffer_info->next_to_watch = i; |
| |
| len -= size; |
| offset += size; |
| count++; |
| i++; |
| if (i == tx_ring->count) |
| i = 0; |
| } |
| } |
| if (i == 0) |
| i = tx_ring->count - 1; |
| else |
| i = i - 1; |
| tx_ring->tx_buffer_info[i].skb = skb; |
| tx_ring->tx_buffer_info[first].next_to_watch = i; |
| |
| return count; |
| } |
| |
| static void ixgbe_tx_queue(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *tx_ring, |
| int tx_flags, int count, u32 paylen, u8 hdr_len) |
| { |
| union ixgbe_adv_tx_desc *tx_desc = NULL; |
| struct ixgbe_tx_buffer *tx_buffer_info; |
| u32 olinfo_status = 0, cmd_type_len = 0; |
| unsigned int i; |
| u32 txd_cmd = IXGBE_TXD_CMD_EOP | IXGBE_TXD_CMD_RS | IXGBE_TXD_CMD_IFCS; |
| |
| cmd_type_len |= IXGBE_ADVTXD_DTYP_DATA; |
| |
| cmd_type_len |= IXGBE_ADVTXD_DCMD_IFCS | IXGBE_ADVTXD_DCMD_DEXT; |
| |
| if (tx_flags & IXGBE_TX_FLAGS_VLAN) |
| cmd_type_len |= IXGBE_ADVTXD_DCMD_VLE; |
| |
| if (tx_flags & IXGBE_TX_FLAGS_TSO) { |
| cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE; |
| |
| olinfo_status |= IXGBE_TXD_POPTS_TXSM << |
| IXGBE_ADVTXD_POPTS_SHIFT; |
| |
| if (tx_flags & IXGBE_TX_FLAGS_IPV4) |
| olinfo_status |= IXGBE_TXD_POPTS_IXSM << |
| IXGBE_ADVTXD_POPTS_SHIFT; |
| |
| } else if (tx_flags & IXGBE_TX_FLAGS_CSUM) |
| olinfo_status |= IXGBE_TXD_POPTS_TXSM << |
| IXGBE_ADVTXD_POPTS_SHIFT; |
| |
| olinfo_status |= ((paylen - hdr_len) << IXGBE_ADVTXD_PAYLEN_SHIFT); |
| |
| i = tx_ring->next_to_use; |
| while (count--) { |
| tx_buffer_info = &tx_ring->tx_buffer_info[i]; |
| tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i); |
| tx_desc->read.buffer_addr = cpu_to_le64(tx_buffer_info->dma); |
| tx_desc->read.cmd_type_len = |
| cpu_to_le32(cmd_type_len | tx_buffer_info->length); |
| tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status); |
| |
| i++; |
| if (i == tx_ring->count) |
| i = 0; |
| } |
| |
| tx_desc->read.cmd_type_len |= cpu_to_le32(txd_cmd); |
| |
| /* |
| * Force memory writes to complete before letting h/w |
| * know there are new descriptors to fetch. (Only |
| * applicable for weak-ordered memory model archs, |
| * such as IA-64). |
| */ |
| wmb(); |
| |
| tx_ring->next_to_use = i; |
| writel(i, adapter->hw.hw_addr + tx_ring->tail); |
| } |
| |
| static int __ixgbe_maybe_stop_tx(struct net_device *netdev, |
| struct ixgbe_ring *tx_ring, int size) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| #ifdef CONFIG_NETDEVICES_MULTIQUEUE |
| netif_stop_subqueue(netdev, tx_ring->queue_index); |
| #else |
| netif_stop_queue(netdev); |
| #endif |
| /* Herbert's original patch had: |
| * smp_mb__after_netif_stop_queue(); |
| * but since that doesn't exist yet, just open code it. */ |
| smp_mb(); |
| |
| /* We need to check again in a case another CPU has just |
| * made room available. */ |
| if (likely(IXGBE_DESC_UNUSED(tx_ring) < size)) |
| return -EBUSY; |
| |
| /* A reprieve! - use start_queue because it doesn't call schedule */ |
| #ifdef CONFIG_NETDEVICES_MULTIQUEUE |
| netif_wake_subqueue(netdev, tx_ring->queue_index); |
| #else |
| netif_wake_queue(netdev); |
| #endif |
| ++adapter->restart_queue; |
| return 0; |
| } |
| |
| static int ixgbe_maybe_stop_tx(struct net_device *netdev, |
| struct ixgbe_ring *tx_ring, int size) |
| { |
| if (likely(IXGBE_DESC_UNUSED(tx_ring) >= size)) |
| return 0; |
| return __ixgbe_maybe_stop_tx(netdev, tx_ring, size); |
| } |
| |
| |
| static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_ring *tx_ring; |
| unsigned int len = skb->len; |
| unsigned int first; |
| unsigned int tx_flags = 0; |
| u8 hdr_len = 0; |
| int r_idx = 0, tso; |
| unsigned int mss = 0; |
| int count = 0; |
| unsigned int f; |
| unsigned int nr_frags = skb_shinfo(skb)->nr_frags; |
| len -= skb->data_len; |
| #ifdef CONFIG_NETDEVICES_MULTIQUEUE |
| r_idx = (adapter->num_tx_queues - 1) & skb->queue_mapping; |
| #endif |
| tx_ring = &adapter->tx_ring[r_idx]; |
| |
| |
| if (skb->len <= 0) { |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; |
| } |
| mss = skb_shinfo(skb)->gso_size; |
| |
| if (mss) |
| count++; |
| else if (skb->ip_summed == CHECKSUM_PARTIAL) |
| count++; |
| |
| count += TXD_USE_COUNT(len); |
| for (f = 0; f < nr_frags; f++) |
| count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size); |
| |
| if (ixgbe_maybe_stop_tx(netdev, tx_ring, count)) { |
| adapter->tx_busy++; |
| return NETDEV_TX_BUSY; |
| } |
| if (adapter->vlgrp && vlan_tx_tag_present(skb)) { |
| tx_flags |= IXGBE_TX_FLAGS_VLAN; |
| tx_flags |= (vlan_tx_tag_get(skb) << IXGBE_TX_FLAGS_VLAN_SHIFT); |
| } |
| |
| if (skb->protocol == htons(ETH_P_IP)) |
| tx_flags |= IXGBE_TX_FLAGS_IPV4; |
| first = tx_ring->next_to_use; |
| tso = ixgbe_tso(adapter, tx_ring, skb, tx_flags, &hdr_len); |
| if (tso < 0) { |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| if (tso) |
| tx_flags |= IXGBE_TX_FLAGS_TSO; |
| else if (ixgbe_tx_csum(adapter, tx_ring, skb, tx_flags) && |
| (skb->ip_summed == CHECKSUM_PARTIAL)) |
| tx_flags |= IXGBE_TX_FLAGS_CSUM; |
| |
| ixgbe_tx_queue(adapter, tx_ring, tx_flags, |
| ixgbe_tx_map(adapter, tx_ring, skb, first), |
| skb->len, hdr_len); |
| |
| netdev->trans_start = jiffies; |
| |
| ixgbe_maybe_stop_tx(netdev, tx_ring, DESC_NEEDED); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| /** |
| * ixgbe_get_stats - Get System Network Statistics |
| * @netdev: network interface device structure |
| * |
| * Returns the address of the device statistics structure. |
| * The statistics are actually updated from the timer callback. |
| **/ |
| static struct net_device_stats *ixgbe_get_stats(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| /* only return the current stats */ |
| return &adapter->net_stats; |
| } |
| |
| /** |
| * ixgbe_set_mac - Change the Ethernet Address of the NIC |
| * @netdev: network interface device structure |
| * @p: pointer to an address structure |
| * |
| * Returns 0 on success, negative on failure |
| **/ |
| static int ixgbe_set_mac(struct net_device *netdev, void *p) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct sockaddr *addr = p; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); |
| memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len); |
| |
| ixgbe_set_rar(&adapter->hw, 0, adapter->hw.mac.addr, 0, IXGBE_RAH_AV); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| /* |
| * Polling 'interrupt' - used by things like netconsole to send skbs |
| * without having to re-enable interrupts. It's not called while |
| * the interrupt routine is executing. |
| */ |
| static void ixgbe_netpoll(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| disable_irq(adapter->pdev->irq); |
| adapter->flags |= IXGBE_FLAG_IN_NETPOLL; |
| ixgbe_intr(adapter->pdev->irq, netdev); |
| adapter->flags &= ~IXGBE_FLAG_IN_NETPOLL; |
| enable_irq(adapter->pdev->irq); |
| } |
| #endif |
| |
| /** |
| * ixgbe_napi_add_all - prep napi structs for use |
| * @adapter: private struct |
| * helper function to napi_add each possible q_vector->napi |
| */ |
| static void ixgbe_napi_add_all(struct ixgbe_adapter *adapter) |
| { |
| int i, q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; |
| int (*poll)(struct napi_struct *, int); |
| |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { |
| poll = &ixgbe_clean_rxonly; |
| } else { |
| poll = &ixgbe_poll; |
| /* only one q_vector for legacy modes */ |
| q_vectors = 1; |
| } |
| |
| for (i = 0; i < q_vectors; i++) { |
| struct ixgbe_q_vector *q_vector = &adapter->q_vector[i]; |
| netif_napi_add(adapter->netdev, &q_vector->napi, |
| (*poll), 64); |
| } |
| } |
| |
| /** |
| * ixgbe_probe - Device Initialization Routine |
| * @pdev: PCI device information struct |
| * @ent: entry in ixgbe_pci_tbl |
| * |
| * Returns 0 on success, negative on failure |
| * |
| * ixgbe_probe initializes an adapter identified by a pci_dev structure. |
| * The OS initialization, configuring of the adapter private structure, |
| * and a hardware reset occur. |
| **/ |
| static int __devinit ixgbe_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct net_device *netdev; |
| struct ixgbe_adapter *adapter = NULL; |
| struct ixgbe_hw *hw; |
| const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data]; |
| unsigned long mmio_start, mmio_len; |
| static int cards_found; |
| int i, err, pci_using_dac; |
| u16 link_status, link_speed, link_width; |
| u32 part_num; |
| |
| err = pci_enable_device(pdev); |
| if (err) |
| return err; |
| |
| if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK) && |
| !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) { |
| pci_using_dac = 1; |
| } else { |
| err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); |
| if (err) { |
| err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); |
| if (err) { |
| dev_err(&pdev->dev, "No usable DMA " |
| "configuration, aborting\n"); |
| goto err_dma; |
| } |
| } |
| pci_using_dac = 0; |
| } |
| |
| err = pci_request_regions(pdev, ixgbe_driver_name); |
| if (err) { |
| dev_err(&pdev->dev, "pci_request_regions failed 0x%x\n", err); |
| goto err_pci_reg; |
| } |
| |
| pci_set_master(pdev); |
| pci_save_state(pdev); |
| |
| #ifdef CONFIG_NETDEVICES_MULTIQUEUE |
| netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), MAX_TX_QUEUES); |
| #else |
| netdev = alloc_etherdev(sizeof(struct ixgbe_adapter)); |
| #endif |
| if (!netdev) { |
| err = -ENOMEM; |
| goto err_alloc_etherdev; |
| } |
| |
| SET_NETDEV_DEV(netdev, &pdev->dev); |
| |
| pci_set_drvdata(pdev, netdev); |
| adapter = netdev_priv(netdev); |
| |
| adapter->netdev = netdev; |
| adapter->pdev = pdev; |
| hw = &adapter->hw; |
| hw->back = adapter; |
| adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1; |
| |
| mmio_start = pci_resource_start(pdev, 0); |
| mmio_len = pci_resource_len(pdev, 0); |
| |
| hw->hw_addr = ioremap(mmio_start, mmio_len); |
| if (!hw->hw_addr) { |
| err = -EIO; |
| goto err_ioremap; |
| } |
| |
| for (i = 1; i <= 5; i++) { |
| if (pci_resource_len(pdev, i) == 0) |
| continue; |
| } |
| |
| netdev->open = &ixgbe_open; |
| netdev->stop = &ixgbe_close; |
| netdev->hard_start_xmit = &ixgbe_xmit_frame; |
| netdev->get_stats = &ixgbe_get_stats; |
| netdev->set_multicast_list = &ixgbe_set_multi; |
| netdev->set_mac_address = &ixgbe_set_mac; |
| netdev->change_mtu = &ixgbe_change_mtu; |
| ixgbe_set_ethtool_ops(netdev); |
| netdev->tx_timeout = &ixgbe_tx_timeout; |
| netdev->watchdog_timeo = 5 * HZ; |
| netdev->vlan_rx_register = ixgbe_vlan_rx_register; |
| netdev->vlan_rx_add_vid = ixgbe_vlan_rx_add_vid; |
| netdev->vlan_rx_kill_vid = ixgbe_vlan_rx_kill_vid; |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| netdev->poll_controller = ixgbe_netpoll; |
| #endif |
| strcpy(netdev->name, pci_name(pdev)); |
| |
| netdev->mem_start = mmio_start; |
| netdev->mem_end = mmio_start + mmio_len; |
| |
| adapter->bd_number = cards_found; |
| |
| /* PCI config space info */ |
| hw->vendor_id = pdev->vendor; |
| hw->device_id = pdev->device; |
| hw->revision_id = pdev->revision; |
| hw->subsystem_vendor_id = pdev->subsystem_vendor; |
| hw->subsystem_device_id = pdev->subsystem_device; |
| |
| /* Setup hw api */ |
| memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops)); |
| hw->mac.type = ii->mac; |
| |
| err = ii->get_invariants(hw); |
| if (err) |
| goto err_hw_init; |
| |
| /* setup the private structure */ |
| err = ixgbe_sw_init(adapter); |
| if (err) |
| goto err_sw_init; |
| |
| netdev->features = NETIF_F_SG | |
| NETIF_F_HW_CSUM | |
| NETIF_F_HW_VLAN_TX | |
| NETIF_F_HW_VLAN_RX | |
| NETIF_F_HW_VLAN_FILTER; |
| |
| netdev->features |= NETIF_F_TSO; |
| |
| netdev->features |= NETIF_F_TSO6; |
| if (pci_using_dac) |
| netdev->features |= NETIF_F_HIGHDMA; |
| |
| #ifdef CONFIG_NETDEVICES_MULTIQUEUE |
| netdev->features |= NETIF_F_MULTI_QUEUE; |
| #endif |
| |
| /* make sure the EEPROM is good */ |
| if (ixgbe_validate_eeprom_checksum(hw, NULL) < 0) { |
| dev_err(&pdev->dev, "The EEPROM Checksum Is Not Valid\n"); |
| err = -EIO; |
| goto err_eeprom; |
| } |
| |
| memcpy(netdev->dev_addr, hw->mac.perm_addr, netdev->addr_len); |
| memcpy(netdev->perm_addr, hw->mac.perm_addr, netdev->addr_len); |
| |
| if (ixgbe_validate_mac_addr(netdev->dev_addr)) { |
| err = -EIO; |
| goto err_eeprom; |
| } |
| |
| init_timer(&adapter->watchdog_timer); |
| adapter->watchdog_timer.function = &ixgbe_watchdog; |
| adapter->watchdog_timer.data = (unsigned long)adapter; |
| |
| INIT_WORK(&adapter->reset_task, ixgbe_reset_task); |
| |
| /* initialize default flow control settings */ |
| hw->fc.original_type = ixgbe_fc_full; |
| hw->fc.type = ixgbe_fc_full; |
| hw->fc.high_water = IXGBE_DEFAULT_FCRTH; |
| hw->fc.low_water = IXGBE_DEFAULT_FCRTL; |
| hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE; |
| |
| err = ixgbe_init_interrupt_scheme(adapter); |
| if (err) |
| goto err_sw_init; |
| |
| /* print bus type/speed/width info */ |
| pci_read_config_word(pdev, IXGBE_PCI_LINK_STATUS, &link_status); |
| link_speed = link_status & IXGBE_PCI_LINK_SPEED; |
| link_width = link_status & IXGBE_PCI_LINK_WIDTH; |
| dev_info(&pdev->dev, "(PCI Express:%s:%s) " |
| "%02x:%02x:%02x:%02x:%02x:%02x\n", |
| ((link_speed == IXGBE_PCI_LINK_SPEED_5000) ? "5.0Gb/s" : |
| (link_speed == IXGBE_PCI_LINK_SPEED_2500) ? "2.5Gb/s" : |
| "Unknown"), |
| ((link_width == IXGBE_PCI_LINK_WIDTH_8) ? "Width x8" : |
| (link_width == IXGBE_PCI_LINK_WIDTH_4) ? "Width x4" : |
| (link_width == IXGBE_PCI_LINK_WIDTH_2) ? "Width x2" : |
| (link_width == IXGBE_PCI_LINK_WIDTH_1) ? "Width x1" : |
| "Unknown"), |
| netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2], |
| netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]); |
| ixgbe_read_part_num(hw, &part_num); |
| dev_info(&pdev->dev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n", |
| hw->mac.type, hw->phy.type, |
| (part_num >> 8), (part_num & 0xff)); |
| |
| if (link_width <= IXGBE_PCI_LINK_WIDTH_4) { |
| dev_warn(&pdev->dev, "PCI-Express bandwidth available for " |
| "this card is not sufficient for optimal " |
| "performance.\n"); |
| dev_warn(&pdev->dev, "For optimal performance a x8 " |
| "PCI-Express slot is required.\n"); |
| } |
| |
| /* reset the hardware with the new settings */ |
| ixgbe_start_hw(hw); |
| |
| netif_carrier_off(netdev); |
| netif_stop_queue(netdev); |
| #ifdef CONFIG_NETDEVICES_MULTIQUEUE |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| netif_stop_subqueue(netdev, i); |
| #endif |
| |
| ixgbe_napi_add_all(adapter); |
| |
| strcpy(netdev->name, "eth%d"); |
| err = register_netdev(netdev); |
| if (err) |
| goto err_register; |
| |
| #ifdef CONFIG_DCA |
| if (dca_add_requester(&pdev->dev) == 0) { |
| adapter->flags |= IXGBE_FLAG_DCA_ENABLED; |
| /* always use CB2 mode, difference is masked |
| * in the CB driver */ |
| IXGBE_WRITE_REG(hw, IXGBE_DCA_CTRL, 2); |
| ixgbe_setup_dca(adapter); |
| } |
| #endif |
| |
| dev_info(&pdev->dev, "Intel(R) 10 Gigabit Network Connection\n"); |
| cards_found++; |
| return 0; |
| |
| err_register: |
| ixgbe_release_hw_control(adapter); |
| err_hw_init: |
| err_sw_init: |
| ixgbe_reset_interrupt_capability(adapter); |
| err_eeprom: |
| iounmap(hw->hw_addr); |
| err_ioremap: |
| free_netdev(netdev); |
| err_alloc_etherdev: |
| pci_release_regions(pdev); |
| err_pci_reg: |
| err_dma: |
| pci_disable_device(pdev); |
| return err; |
| } |
| |
| /** |
| * ixgbe_remove - Device Removal Routine |
| * @pdev: PCI device information struct |
| * |
| * ixgbe_remove is called by the PCI subsystem to alert the driver |
| * that it should release a PCI device. The could be caused by a |
| * Hot-Plug event, or because the driver is going to be removed from |
| * memory. |
| **/ |
| static void __devexit ixgbe_remove(struct pci_dev *pdev) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| set_bit(__IXGBE_DOWN, &adapter->state); |
| del_timer_sync(&adapter->watchdog_timer); |
| |
| flush_scheduled_work(); |
| |
| #ifdef CONFIG_DCA |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { |
| adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; |
| dca_remove_requester(&pdev->dev); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1); |
| } |
| |
| #endif |
| unregister_netdev(netdev); |
| |
| ixgbe_reset_interrupt_capability(adapter); |
| |
| ixgbe_release_hw_control(adapter); |
| |
| iounmap(adapter->hw.hw_addr); |
| pci_release_regions(pdev); |
| |
| DPRINTK(PROBE, INFO, "complete\n"); |
| kfree(adapter->tx_ring); |
| kfree(adapter->rx_ring); |
| |
| free_netdev(netdev); |
| |
| pci_disable_device(pdev); |
| } |
| |
| /** |
| * ixgbe_io_error_detected - called when PCI error is detected |
| * @pdev: Pointer to PCI device |
| * @state: The current pci connection state |
| * |
| * This function is called after a PCI bus error affecting |
| * this device has been detected. |
| */ |
| static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev, |
| pci_channel_state_t state) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct ixgbe_adapter *adapter = netdev->priv; |
| |
| netif_device_detach(netdev); |
| |
| if (netif_running(netdev)) |
| ixgbe_down(adapter); |
| pci_disable_device(pdev); |
| |
| /* Request a slot slot reset. */ |
| return PCI_ERS_RESULT_NEED_RESET; |
| } |
| |
| /** |
| * ixgbe_io_slot_reset - called after the pci bus has been reset. |
| * @pdev: Pointer to PCI device |
| * |
| * Restart the card from scratch, as if from a cold-boot. |
| */ |
| static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct ixgbe_adapter *adapter = netdev->priv; |
| |
| if (pci_enable_device(pdev)) { |
| DPRINTK(PROBE, ERR, |
| "Cannot re-enable PCI device after reset.\n"); |
| return PCI_ERS_RESULT_DISCONNECT; |
| } |
| pci_set_master(pdev); |
| pci_restore_state(pdev); |
| |
| pci_enable_wake(pdev, PCI_D3hot, 0); |
| pci_enable_wake(pdev, PCI_D3cold, 0); |
| |
| ixgbe_reset(adapter); |
| |
| return PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| /** |
| * ixgbe_io_resume - called when traffic can start flowing again. |
| * @pdev: Pointer to PCI device |
| * |
| * This callback is called when the error recovery driver tells us that |
| * its OK to resume normal operation. |
| */ |
| static void ixgbe_io_resume(struct pci_dev *pdev) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct ixgbe_adapter *adapter = netdev->priv; |
| |
| if (netif_running(netdev)) { |
| if (ixgbe_up(adapter)) { |
| DPRINTK(PROBE, INFO, "ixgbe_up failed after reset\n"); |
| return; |
| } |
| } |
| |
| netif_device_attach(netdev); |
| |
| } |
| |
| static struct pci_error_handlers ixgbe_err_handler = { |
| .error_detected = ixgbe_io_error_detected, |
| .slot_reset = ixgbe_io_slot_reset, |
| .resume = ixgbe_io_resume, |
| }; |
| |
| static struct pci_driver ixgbe_driver = { |
| .name = ixgbe_driver_name, |
| .id_table = ixgbe_pci_tbl, |
| .probe = ixgbe_probe, |
| .remove = __devexit_p(ixgbe_remove), |
| #ifdef CONFIG_PM |
| .suspend = ixgbe_suspend, |
| .resume = ixgbe_resume, |
| #endif |
| .shutdown = ixgbe_shutdown, |
| .err_handler = &ixgbe_err_handler |
| }; |
| |
| /** |
| * ixgbe_init_module - Driver Registration Routine |
| * |
| * ixgbe_init_module is the first routine called when the driver is |
| * loaded. All it does is register with the PCI subsystem. |
| **/ |
| static int __init ixgbe_init_module(void) |
| { |
| int ret; |
| printk(KERN_INFO "%s: %s - version %s\n", ixgbe_driver_name, |
| ixgbe_driver_string, ixgbe_driver_version); |
| |
| printk(KERN_INFO "%s: %s\n", ixgbe_driver_name, ixgbe_copyright); |
| |
| #ifdef CONFIG_DCA |
| dca_register_notify(&dca_notifier); |
| |
| #endif |
| ret = pci_register_driver(&ixgbe_driver); |
| return ret; |
| } |
| module_init(ixgbe_init_module); |
| |
| /** |
| * ixgbe_exit_module - Driver Exit Cleanup Routine |
| * |
| * ixgbe_exit_module is called just before the driver is removed |
| * from memory. |
| **/ |
| static void __exit ixgbe_exit_module(void) |
| { |
| #ifdef CONFIG_DCA |
| dca_unregister_notify(&dca_notifier); |
| #endif |
| pci_unregister_driver(&ixgbe_driver); |
| } |
| |
| #ifdef CONFIG_DCA |
| static int ixgbe_notify_dca(struct notifier_block *nb, unsigned long event, |
| void *p) |
| { |
| int ret_val; |
| |
| ret_val = driver_for_each_device(&ixgbe_driver.driver, NULL, &event, |
| __ixgbe_notify_dca); |
| |
| return ret_val ? NOTIFY_BAD : NOTIFY_DONE; |
| } |
| #endif /* CONFIG_DCA */ |
| |
| module_exit(ixgbe_exit_module); |
| |
| /* ixgbe_main.c */ |