| /* |
| * bxt-sst.c - DSP library functions for BXT platform |
| * |
| * Copyright (C) 2015-16 Intel Corp |
| * Author:Rafal Redzimski <rafal.f.redzimski@intel.com> |
| * Jeeja KP <jeeja.kp@intel.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/firmware.h> |
| #include <linux/device.h> |
| |
| #include "../common/sst-dsp.h" |
| #include "../common/sst-dsp-priv.h" |
| #include "skl-sst-ipc.h" |
| |
| #define BXT_BASEFW_TIMEOUT 3000 |
| #define BXT_INIT_TIMEOUT 300 |
| #define BXT_ROM_INIT_TIMEOUT 70 |
| #define BXT_IPC_PURGE_FW 0x01004000 |
| |
| #define BXT_ROM_INIT 0x5 |
| #define BXT_ADSP_SRAM0_BASE 0x80000 |
| |
| /* Firmware status window */ |
| #define BXT_ADSP_FW_STATUS BXT_ADSP_SRAM0_BASE |
| #define BXT_ADSP_ERROR_CODE (BXT_ADSP_FW_STATUS + 0x4) |
| |
| #define BXT_ADSP_SRAM1_BASE 0xA0000 |
| |
| #define BXT_INSTANCE_ID 0 |
| #define BXT_BASE_FW_MODULE_ID 0 |
| |
| #define BXT_ADSP_FW_BIN_HDR_OFFSET 0x2000 |
| |
| /* Delay before scheduling D0i3 entry */ |
| #define BXT_D0I3_DELAY 5000 |
| |
| #define BXT_FW_ROM_INIT_RETRY 3 |
| |
| static unsigned int bxt_get_errorcode(struct sst_dsp *ctx) |
| { |
| return sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE); |
| } |
| |
| static void sst_bxt_release_library(struct skl_lib_info *linfo, int lib_count) |
| { |
| int i; |
| |
| for (i = 1; i < lib_count; i++) { |
| if (linfo[i].fw) { |
| release_firmware(linfo[i].fw); |
| linfo[i].fw = NULL; |
| } |
| } |
| } |
| |
| static int |
| bxt_load_library(struct sst_dsp *ctx, struct skl_lib_info *linfo, int lib_count) |
| { |
| struct snd_dma_buffer dmab; |
| struct skl_sst *skl = ctx->thread_context; |
| struct firmware stripped_fw; |
| int ret = 0, i, dma_id, stream_tag; |
| |
| /* library indices start from 1 to N. 0 represents base FW */ |
| for (i = 1; i < lib_count; i++) { |
| if (linfo[i].fw == NULL) { |
| ret = request_firmware(&linfo[i].fw, linfo[i].name, |
| ctx->dev); |
| if (ret < 0) { |
| dev_err(ctx->dev, "Request lib %s failed:%d\n", |
| linfo[i].name, ret); |
| goto load_library_failed; |
| } |
| } |
| |
| if (skl->is_first_boot) { |
| ret = snd_skl_parse_uuids(ctx, linfo[i].fw, |
| BXT_ADSP_FW_BIN_HDR_OFFSET, i); |
| if (ret < 0) |
| goto load_library_failed; |
| } |
| |
| stripped_fw.data = linfo[i].fw->data; |
| stripped_fw.size = linfo[i].fw->size; |
| skl_dsp_strip_extended_manifest(&stripped_fw); |
| |
| stream_tag = ctx->dsp_ops.prepare(ctx->dev, 0x40, |
| stripped_fw.size, &dmab); |
| if (stream_tag <= 0) { |
| dev_err(ctx->dev, "Lib prepare DMA err: %x\n", |
| stream_tag); |
| ret = stream_tag; |
| goto load_library_failed; |
| } |
| |
| dma_id = stream_tag - 1; |
| memcpy(dmab.area, stripped_fw.data, stripped_fw.size); |
| |
| ctx->dsp_ops.trigger(ctx->dev, true, stream_tag); |
| ret = skl_sst_ipc_load_library(&skl->ipc, dma_id, i); |
| if (ret < 0) |
| dev_err(ctx->dev, "IPC Load Lib for %s fail: %d\n", |
| linfo[i].name, ret); |
| |
| ctx->dsp_ops.trigger(ctx->dev, false, stream_tag); |
| ctx->dsp_ops.cleanup(ctx->dev, &dmab, stream_tag); |
| } |
| |
| return ret; |
| |
| load_library_failed: |
| sst_bxt_release_library(linfo, lib_count); |
| return ret; |
| } |
| |
| /* |
| * First boot sequence has some extra steps. Core 0 waits for power |
| * status on core 1, so power up core 1 also momentarily, keep it in |
| * reset/stall and then turn it off |
| */ |
| static int sst_bxt_prepare_fw(struct sst_dsp *ctx, |
| const void *fwdata, u32 fwsize) |
| { |
| int stream_tag, ret; |
| |
| stream_tag = ctx->dsp_ops.prepare(ctx->dev, 0x40, fwsize, &ctx->dmab); |
| if (stream_tag <= 0) { |
| dev_err(ctx->dev, "Failed to prepare DMA FW loading err: %x\n", |
| stream_tag); |
| return stream_tag; |
| } |
| |
| ctx->dsp_ops.stream_tag = stream_tag; |
| memcpy(ctx->dmab.area, fwdata, fwsize); |
| |
| /* Step 1: Power up core 0 and core1 */ |
| ret = skl_dsp_core_power_up(ctx, SKL_DSP_CORE0_MASK | |
| SKL_DSP_CORE_MASK(1)); |
| if (ret < 0) { |
| dev_err(ctx->dev, "dsp core0/1 power up failed\n"); |
| goto base_fw_load_failed; |
| } |
| |
| /* Step 2: Purge FW request */ |
| sst_dsp_shim_write(ctx, SKL_ADSP_REG_HIPCI, SKL_ADSP_REG_HIPCI_BUSY | |
| (BXT_IPC_PURGE_FW | ((stream_tag - 1) << 9))); |
| |
| /* Step 3: Unset core0 reset state & unstall/run core0 */ |
| ret = skl_dsp_start_core(ctx, SKL_DSP_CORE0_MASK); |
| if (ret < 0) { |
| dev_err(ctx->dev, "Start dsp core failed ret: %d\n", ret); |
| ret = -EIO; |
| goto base_fw_load_failed; |
| } |
| |
| /* Step 4: Wait for DONE Bit */ |
| ret = sst_dsp_register_poll(ctx, SKL_ADSP_REG_HIPCIE, |
| SKL_ADSP_REG_HIPCIE_DONE, |
| SKL_ADSP_REG_HIPCIE_DONE, |
| BXT_INIT_TIMEOUT, "HIPCIE Done"); |
| if (ret < 0) { |
| dev_err(ctx->dev, "Timout for Purge Request%d\n", ret); |
| goto base_fw_load_failed; |
| } |
| |
| /* Step 5: power down core1 */ |
| ret = skl_dsp_core_power_down(ctx, SKL_DSP_CORE_MASK(1)); |
| if (ret < 0) { |
| dev_err(ctx->dev, "dsp core1 power down failed\n"); |
| goto base_fw_load_failed; |
| } |
| |
| /* Step 6: Enable Interrupt */ |
| skl_ipc_int_enable(ctx); |
| skl_ipc_op_int_enable(ctx); |
| |
| /* Step 7: Wait for ROM init */ |
| ret = sst_dsp_register_poll(ctx, BXT_ADSP_FW_STATUS, SKL_FW_STS_MASK, |
| SKL_FW_INIT, BXT_ROM_INIT_TIMEOUT, "ROM Load"); |
| if (ret < 0) { |
| dev_err(ctx->dev, "Timeout for ROM init, ret:%d\n", ret); |
| goto base_fw_load_failed; |
| } |
| |
| return ret; |
| |
| base_fw_load_failed: |
| ctx->dsp_ops.cleanup(ctx->dev, &ctx->dmab, stream_tag); |
| skl_dsp_core_power_down(ctx, SKL_DSP_CORE_MASK(1)); |
| skl_dsp_disable_core(ctx, SKL_DSP_CORE0_MASK); |
| return ret; |
| } |
| |
| static int sst_transfer_fw_host_dma(struct sst_dsp *ctx) |
| { |
| int ret; |
| |
| ctx->dsp_ops.trigger(ctx->dev, true, ctx->dsp_ops.stream_tag); |
| ret = sst_dsp_register_poll(ctx, BXT_ADSP_FW_STATUS, SKL_FW_STS_MASK, |
| BXT_ROM_INIT, BXT_BASEFW_TIMEOUT, "Firmware boot"); |
| |
| ctx->dsp_ops.trigger(ctx->dev, false, ctx->dsp_ops.stream_tag); |
| ctx->dsp_ops.cleanup(ctx->dev, &ctx->dmab, ctx->dsp_ops.stream_tag); |
| |
| return ret; |
| } |
| |
| static int bxt_load_base_firmware(struct sst_dsp *ctx) |
| { |
| struct firmware stripped_fw; |
| struct skl_sst *skl = ctx->thread_context; |
| int ret, i; |
| |
| if (ctx->fw == NULL) { |
| ret = request_firmware(&ctx->fw, ctx->fw_name, ctx->dev); |
| if (ret < 0) { |
| dev_err(ctx->dev, "Request firmware failed %d\n", ret); |
| return ret; |
| } |
| } |
| |
| /* prase uuids on first boot */ |
| if (skl->is_first_boot) { |
| ret = snd_skl_parse_uuids(ctx, ctx->fw, BXT_ADSP_FW_BIN_HDR_OFFSET, 0); |
| if (ret < 0) |
| goto sst_load_base_firmware_failed; |
| } |
| |
| stripped_fw.data = ctx->fw->data; |
| stripped_fw.size = ctx->fw->size; |
| skl_dsp_strip_extended_manifest(&stripped_fw); |
| |
| |
| for (i = 0; i < BXT_FW_ROM_INIT_RETRY; i++) { |
| ret = sst_bxt_prepare_fw(ctx, stripped_fw.data, stripped_fw.size); |
| if (ret == 0) |
| break; |
| } |
| |
| if (ret < 0) { |
| dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n", |
| sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE), |
| sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS)); |
| |
| dev_err(ctx->dev, "Core En/ROM load fail:%d\n", ret); |
| goto sst_load_base_firmware_failed; |
| } |
| |
| ret = sst_transfer_fw_host_dma(ctx); |
| if (ret < 0) { |
| dev_err(ctx->dev, "Transfer firmware failed %d\n", ret); |
| dev_info(ctx->dev, "Error code=0x%x: FW status=0x%x\n", |
| sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE), |
| sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS)); |
| |
| skl_dsp_disable_core(ctx, SKL_DSP_CORE0_MASK); |
| } else { |
| dev_dbg(ctx->dev, "Firmware download successful\n"); |
| ret = wait_event_timeout(skl->boot_wait, skl->boot_complete, |
| msecs_to_jiffies(SKL_IPC_BOOT_MSECS)); |
| if (ret == 0) { |
| dev_err(ctx->dev, "DSP boot fail, FW Ready timeout\n"); |
| skl_dsp_disable_core(ctx, SKL_DSP_CORE0_MASK); |
| ret = -EIO; |
| } else { |
| ret = 0; |
| skl->fw_loaded = true; |
| } |
| } |
| |
| return ret; |
| |
| sst_load_base_firmware_failed: |
| release_firmware(ctx->fw); |
| ctx->fw = NULL; |
| return ret; |
| } |
| |
| /* |
| * Decide the D0i3 state that can be targeted based on the usecase |
| * ref counts and DSP state |
| * |
| * Decision Matrix: (X= dont care; state = target state) |
| * |
| * DSP state != SKL_DSP_RUNNING ; state = no d0i3 |
| * |
| * DSP state == SKL_DSP_RUNNING , the following matrix applies |
| * non_d0i3 >0; streaming =X; non_streaming =X; state = no d0i3 |
| * non_d0i3 =X; streaming =0; non_streaming =0; state = no d0i3 |
| * non_d0i3 =0; streaming >0; non_streaming =X; state = streaming d0i3 |
| * non_d0i3 =0; streaming =0; non_streaming =X; state = non-streaming d0i3 |
| */ |
| static int bxt_d0i3_target_state(struct sst_dsp *ctx) |
| { |
| struct skl_sst *skl = ctx->thread_context; |
| struct skl_d0i3_data *d0i3 = &skl->d0i3; |
| |
| if (skl->cores.state[SKL_DSP_CORE0_ID] != SKL_DSP_RUNNING) |
| return SKL_DSP_D0I3_NONE; |
| |
| if (d0i3->non_d0i3) |
| return SKL_DSP_D0I3_NONE; |
| else if (d0i3->streaming) |
| return SKL_DSP_D0I3_STREAMING; |
| else if (d0i3->non_streaming) |
| return SKL_DSP_D0I3_NON_STREAMING; |
| else |
| return SKL_DSP_D0I3_NONE; |
| } |
| |
| static void bxt_set_dsp_D0i3(struct work_struct *work) |
| { |
| int ret; |
| struct skl_ipc_d0ix_msg msg; |
| struct skl_sst *skl = container_of(work, |
| struct skl_sst, d0i3.work.work); |
| struct sst_dsp *ctx = skl->dsp; |
| struct skl_d0i3_data *d0i3 = &skl->d0i3; |
| int target_state; |
| |
| dev_dbg(ctx->dev, "In %s:\n", __func__); |
| |
| /* D0i3 entry allowed only if core 0 alone is running */ |
| if (skl_dsp_get_enabled_cores(ctx) != SKL_DSP_CORE0_MASK) { |
| dev_warn(ctx->dev, |
| "D0i3 allowed when only core0 running:Exit\n"); |
| return; |
| } |
| |
| target_state = bxt_d0i3_target_state(ctx); |
| if (target_state == SKL_DSP_D0I3_NONE) |
| return; |
| |
| msg.instance_id = 0; |
| msg.module_id = 0; |
| msg.wake = 1; |
| msg.streaming = 0; |
| if (target_state == SKL_DSP_D0I3_STREAMING) |
| msg.streaming = 1; |
| |
| ret = skl_ipc_set_d0ix(&skl->ipc, &msg); |
| |
| if (ret < 0) { |
| dev_err(ctx->dev, "Failed to set DSP to D0i3 state\n"); |
| return; |
| } |
| |
| /* Set Vendor specific register D0I3C.I3 to enable D0i3*/ |
| if (skl->update_d0i3c) |
| skl->update_d0i3c(skl->dev, true); |
| |
| d0i3->state = target_state; |
| skl->cores.state[SKL_DSP_CORE0_ID] = SKL_DSP_RUNNING_D0I3; |
| } |
| |
| static int bxt_schedule_dsp_D0i3(struct sst_dsp *ctx) |
| { |
| struct skl_sst *skl = ctx->thread_context; |
| struct skl_d0i3_data *d0i3 = &skl->d0i3; |
| |
| /* Schedule D0i3 only if the usecase ref counts are appropriate */ |
| if (bxt_d0i3_target_state(ctx) != SKL_DSP_D0I3_NONE) { |
| |
| dev_dbg(ctx->dev, "%s: Schedule D0i3\n", __func__); |
| |
| schedule_delayed_work(&d0i3->work, |
| msecs_to_jiffies(BXT_D0I3_DELAY)); |
| } |
| |
| return 0; |
| } |
| |
| static int bxt_set_dsp_D0i0(struct sst_dsp *ctx) |
| { |
| int ret; |
| struct skl_ipc_d0ix_msg msg; |
| struct skl_sst *skl = ctx->thread_context; |
| |
| dev_dbg(ctx->dev, "In %s:\n", __func__); |
| |
| /* First Cancel any pending attempt to put DSP to D0i3 */ |
| cancel_delayed_work_sync(&skl->d0i3.work); |
| |
| /* If DSP is currently in D0i3, bring it to D0i0 */ |
| if (skl->cores.state[SKL_DSP_CORE0_ID] != SKL_DSP_RUNNING_D0I3) |
| return 0; |
| |
| dev_dbg(ctx->dev, "Set DSP to D0i0\n"); |
| |
| msg.instance_id = 0; |
| msg.module_id = 0; |
| msg.streaming = 0; |
| msg.wake = 0; |
| |
| if (skl->d0i3.state == SKL_DSP_D0I3_STREAMING) |
| msg.streaming = 1; |
| |
| /* Clear Vendor specific register D0I3C.I3 to disable D0i3*/ |
| if (skl->update_d0i3c) |
| skl->update_d0i3c(skl->dev, false); |
| |
| ret = skl_ipc_set_d0ix(&skl->ipc, &msg); |
| if (ret < 0) { |
| dev_err(ctx->dev, "Failed to set DSP to D0i0\n"); |
| return ret; |
| } |
| |
| skl->cores.state[SKL_DSP_CORE0_ID] = SKL_DSP_RUNNING; |
| skl->d0i3.state = SKL_DSP_D0I3_NONE; |
| |
| return 0; |
| } |
| |
| static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id) |
| { |
| struct skl_sst *skl = ctx->thread_context; |
| int ret; |
| struct skl_ipc_dxstate_info dx; |
| unsigned int core_mask = SKL_DSP_CORE_MASK(core_id); |
| |
| if (skl->fw_loaded == false) { |
| skl->boot_complete = false; |
| ret = bxt_load_base_firmware(ctx); |
| if (ret < 0) { |
| dev_err(ctx->dev, "reload fw failed: %d\n", ret); |
| return ret; |
| } |
| |
| if (skl->lib_count > 1) { |
| ret = bxt_load_library(ctx, skl->lib_info, |
| skl->lib_count); |
| if (ret < 0) { |
| dev_err(ctx->dev, "reload libs failed: %d\n", ret); |
| return ret; |
| } |
| } |
| return ret; |
| } |
| |
| /* If core 0 is being turned on, turn on core 1 as well */ |
| if (core_id == SKL_DSP_CORE0_ID) |
| ret = skl_dsp_core_power_up(ctx, core_mask | |
| SKL_DSP_CORE_MASK(1)); |
| else |
| ret = skl_dsp_core_power_up(ctx, core_mask); |
| |
| if (ret < 0) |
| goto err; |
| |
| if (core_id == SKL_DSP_CORE0_ID) { |
| |
| /* |
| * Enable interrupt after SPA is set and before |
| * DSP is unstalled |
| */ |
| skl_ipc_int_enable(ctx); |
| skl_ipc_op_int_enable(ctx); |
| skl->boot_complete = false; |
| } |
| |
| ret = skl_dsp_start_core(ctx, core_mask); |
| if (ret < 0) |
| goto err; |
| |
| if (core_id == SKL_DSP_CORE0_ID) { |
| ret = wait_event_timeout(skl->boot_wait, |
| skl->boot_complete, |
| msecs_to_jiffies(SKL_IPC_BOOT_MSECS)); |
| |
| /* If core 1 was turned on for booting core 0, turn it off */ |
| skl_dsp_core_power_down(ctx, SKL_DSP_CORE_MASK(1)); |
| if (ret == 0) { |
| dev_err(ctx->dev, "%s: DSP boot timeout\n", __func__); |
| dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n", |
| sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE), |
| sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS)); |
| dev_err(ctx->dev, "Failed to set core0 to D0 state\n"); |
| ret = -EIO; |
| goto err; |
| } |
| } |
| |
| /* Tell FW if additional core in now On */ |
| |
| if (core_id != SKL_DSP_CORE0_ID) { |
| dx.core_mask = core_mask; |
| dx.dx_mask = core_mask; |
| |
| ret = skl_ipc_set_dx(&skl->ipc, BXT_INSTANCE_ID, |
| BXT_BASE_FW_MODULE_ID, &dx); |
| if (ret < 0) { |
| dev_err(ctx->dev, "IPC set_dx for core %d fail: %d\n", |
| core_id, ret); |
| goto err; |
| } |
| } |
| |
| skl->cores.state[core_id] = SKL_DSP_RUNNING; |
| return 0; |
| err: |
| if (core_id == SKL_DSP_CORE0_ID) |
| core_mask |= SKL_DSP_CORE_MASK(1); |
| skl_dsp_disable_core(ctx, core_mask); |
| |
| return ret; |
| } |
| |
| static int bxt_set_dsp_D3(struct sst_dsp *ctx, unsigned int core_id) |
| { |
| int ret; |
| struct skl_ipc_dxstate_info dx; |
| struct skl_sst *skl = ctx->thread_context; |
| unsigned int core_mask = SKL_DSP_CORE_MASK(core_id); |
| |
| dx.core_mask = core_mask; |
| dx.dx_mask = SKL_IPC_D3_MASK; |
| |
| dev_dbg(ctx->dev, "core mask=%x dx_mask=%x\n", |
| dx.core_mask, dx.dx_mask); |
| |
| ret = skl_ipc_set_dx(&skl->ipc, BXT_INSTANCE_ID, |
| BXT_BASE_FW_MODULE_ID, &dx); |
| if (ret < 0) |
| dev_err(ctx->dev, |
| "Failed to set DSP to D3:core id = %d;Continue reset\n", |
| core_id); |
| |
| ret = skl_dsp_disable_core(ctx, core_mask); |
| if (ret < 0) { |
| dev_err(ctx->dev, "Failed to disable core %d\n", ret); |
| return ret; |
| } |
| skl->cores.state[core_id] = SKL_DSP_RESET; |
| return 0; |
| } |
| |
| static struct skl_dsp_fw_ops bxt_fw_ops = { |
| .set_state_D0 = bxt_set_dsp_D0, |
| .set_state_D3 = bxt_set_dsp_D3, |
| .set_state_D0i3 = bxt_schedule_dsp_D0i3, |
| .set_state_D0i0 = bxt_set_dsp_D0i0, |
| .load_fw = bxt_load_base_firmware, |
| .get_fw_errcode = bxt_get_errorcode, |
| .load_library = bxt_load_library, |
| }; |
| |
| static struct sst_ops skl_ops = { |
| .irq_handler = skl_dsp_sst_interrupt, |
| .write = sst_shim32_write, |
| .read = sst_shim32_read, |
| .ram_read = sst_memcpy_fromio_32, |
| .ram_write = sst_memcpy_toio_32, |
| .free = skl_dsp_free, |
| }; |
| |
| static struct sst_dsp_device skl_dev = { |
| .thread = skl_dsp_irq_thread_handler, |
| .ops = &skl_ops, |
| }; |
| |
| int bxt_sst_dsp_init(struct device *dev, void __iomem *mmio_base, int irq, |
| const char *fw_name, struct skl_dsp_loader_ops dsp_ops, |
| struct skl_sst **dsp) |
| { |
| struct skl_sst *skl; |
| struct sst_dsp *sst; |
| int ret; |
| |
| skl = devm_kzalloc(dev, sizeof(*skl), GFP_KERNEL); |
| if (skl == NULL) |
| return -ENOMEM; |
| |
| skl->dev = dev; |
| skl_dev.thread_context = skl; |
| INIT_LIST_HEAD(&skl->uuid_list); |
| |
| skl->dsp = skl_dsp_ctx_init(dev, &skl_dev, irq); |
| if (!skl->dsp) { |
| dev_err(skl->dev, "skl_dsp_ctx_init failed\n"); |
| return -ENODEV; |
| } |
| |
| sst = skl->dsp; |
| sst->fw_name = fw_name; |
| sst->dsp_ops = dsp_ops; |
| sst->fw_ops = bxt_fw_ops; |
| sst->addr.lpe = mmio_base; |
| sst->addr.shim = mmio_base; |
| |
| sst_dsp_mailbox_init(sst, (BXT_ADSP_SRAM0_BASE + SKL_ADSP_W0_STAT_SZ), |
| SKL_ADSP_W0_UP_SZ, BXT_ADSP_SRAM1_BASE, SKL_ADSP_W1_SZ); |
| |
| INIT_LIST_HEAD(&sst->module_list); |
| ret = skl_ipc_init(dev, skl); |
| if (ret) |
| return ret; |
| |
| /* set the D0i3 check */ |
| skl->ipc.ops.check_dsp_lp_on = skl_ipc_check_D0i0; |
| |
| skl->cores.count = 2; |
| skl->boot_complete = false; |
| init_waitqueue_head(&skl->boot_wait); |
| skl->is_first_boot = true; |
| INIT_DELAYED_WORK(&skl->d0i3.work, bxt_set_dsp_D0i3); |
| skl->d0i3.state = SKL_DSP_D0I3_NONE; |
| |
| if (dsp) |
| *dsp = skl; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(bxt_sst_dsp_init); |
| |
| int bxt_sst_init_fw(struct device *dev, struct skl_sst *ctx) |
| { |
| int ret; |
| struct sst_dsp *sst = ctx->dsp; |
| |
| ret = sst->fw_ops.load_fw(sst); |
| if (ret < 0) { |
| dev_err(dev, "Load base fw failed: %x\n", ret); |
| return ret; |
| } |
| |
| skl_dsp_init_core_state(sst); |
| |
| if (ctx->lib_count > 1) { |
| ret = sst->fw_ops.load_library(sst, ctx->lib_info, |
| ctx->lib_count); |
| if (ret < 0) { |
| dev_err(dev, "Load Library failed : %x\n", ret); |
| return ret; |
| } |
| } |
| ctx->is_first_boot = false; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(bxt_sst_init_fw); |
| |
| void bxt_sst_dsp_cleanup(struct device *dev, struct skl_sst *ctx) |
| { |
| |
| sst_bxt_release_library(ctx->lib_info, ctx->lib_count); |
| if (ctx->dsp->fw) |
| release_firmware(ctx->dsp->fw); |
| skl_freeup_uuid_list(ctx); |
| skl_ipc_free(&ctx->ipc); |
| ctx->dsp->cl_dev.ops.cl_cleanup_controller(ctx->dsp); |
| |
| if (ctx->dsp->addr.lpe) |
| iounmap(ctx->dsp->addr.lpe); |
| |
| ctx->dsp->ops->free(ctx->dsp); |
| } |
| EXPORT_SYMBOL_GPL(bxt_sst_dsp_cleanup); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("Intel Broxton IPC driver"); |