| /* |
| * linux/drivers/video/omap2/dss/dispc.c |
| * |
| * Copyright (C) 2009 Nokia Corporation |
| * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> |
| * |
| * Some code and ideas taken from drivers/video/omap/ driver |
| * by Imre Deak. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #define DSS_SUBSYS_NAME "DISPC" |
| |
| #include <linux/kernel.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/vmalloc.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/jiffies.h> |
| #include <linux/seq_file.h> |
| #include <linux/delay.h> |
| #include <linux/workqueue.h> |
| |
| #include <plat/sram.h> |
| #include <plat/clock.h> |
| |
| #include <plat/display.h> |
| |
| #include "dss.h" |
| |
| /* DISPC */ |
| #define DISPC_BASE 0x48050400 |
| |
| #define DISPC_SZ_REGS SZ_1K |
| |
| struct dispc_reg { u16 idx; }; |
| |
| #define DISPC_REG(idx) ((const struct dispc_reg) { idx }) |
| |
| /* DISPC common */ |
| #define DISPC_REVISION DISPC_REG(0x0000) |
| #define DISPC_SYSCONFIG DISPC_REG(0x0010) |
| #define DISPC_SYSSTATUS DISPC_REG(0x0014) |
| #define DISPC_IRQSTATUS DISPC_REG(0x0018) |
| #define DISPC_IRQENABLE DISPC_REG(0x001C) |
| #define DISPC_CONTROL DISPC_REG(0x0040) |
| #define DISPC_CONFIG DISPC_REG(0x0044) |
| #define DISPC_CAPABLE DISPC_REG(0x0048) |
| #define DISPC_DEFAULT_COLOR0 DISPC_REG(0x004C) |
| #define DISPC_DEFAULT_COLOR1 DISPC_REG(0x0050) |
| #define DISPC_TRANS_COLOR0 DISPC_REG(0x0054) |
| #define DISPC_TRANS_COLOR1 DISPC_REG(0x0058) |
| #define DISPC_LINE_STATUS DISPC_REG(0x005C) |
| #define DISPC_LINE_NUMBER DISPC_REG(0x0060) |
| #define DISPC_TIMING_H DISPC_REG(0x0064) |
| #define DISPC_TIMING_V DISPC_REG(0x0068) |
| #define DISPC_POL_FREQ DISPC_REG(0x006C) |
| #define DISPC_DIVISOR DISPC_REG(0x0070) |
| #define DISPC_GLOBAL_ALPHA DISPC_REG(0x0074) |
| #define DISPC_SIZE_DIG DISPC_REG(0x0078) |
| #define DISPC_SIZE_LCD DISPC_REG(0x007C) |
| |
| /* DISPC GFX plane */ |
| #define DISPC_GFX_BA0 DISPC_REG(0x0080) |
| #define DISPC_GFX_BA1 DISPC_REG(0x0084) |
| #define DISPC_GFX_POSITION DISPC_REG(0x0088) |
| #define DISPC_GFX_SIZE DISPC_REG(0x008C) |
| #define DISPC_GFX_ATTRIBUTES DISPC_REG(0x00A0) |
| #define DISPC_GFX_FIFO_THRESHOLD DISPC_REG(0x00A4) |
| #define DISPC_GFX_FIFO_SIZE_STATUS DISPC_REG(0x00A8) |
| #define DISPC_GFX_ROW_INC DISPC_REG(0x00AC) |
| #define DISPC_GFX_PIXEL_INC DISPC_REG(0x00B0) |
| #define DISPC_GFX_WINDOW_SKIP DISPC_REG(0x00B4) |
| #define DISPC_GFX_TABLE_BA DISPC_REG(0x00B8) |
| |
| #define DISPC_DATA_CYCLE1 DISPC_REG(0x01D4) |
| #define DISPC_DATA_CYCLE2 DISPC_REG(0x01D8) |
| #define DISPC_DATA_CYCLE3 DISPC_REG(0x01DC) |
| |
| #define DISPC_CPR_COEF_R DISPC_REG(0x0220) |
| #define DISPC_CPR_COEF_G DISPC_REG(0x0224) |
| #define DISPC_CPR_COEF_B DISPC_REG(0x0228) |
| |
| #define DISPC_GFX_PRELOAD DISPC_REG(0x022C) |
| |
| /* DISPC Video plane, n = 0 for VID1 and n = 1 for VID2 */ |
| #define DISPC_VID_REG(n, idx) DISPC_REG(0x00BC + (n)*0x90 + idx) |
| |
| #define DISPC_VID_BA0(n) DISPC_VID_REG(n, 0x0000) |
| #define DISPC_VID_BA1(n) DISPC_VID_REG(n, 0x0004) |
| #define DISPC_VID_POSITION(n) DISPC_VID_REG(n, 0x0008) |
| #define DISPC_VID_SIZE(n) DISPC_VID_REG(n, 0x000C) |
| #define DISPC_VID_ATTRIBUTES(n) DISPC_VID_REG(n, 0x0010) |
| #define DISPC_VID_FIFO_THRESHOLD(n) DISPC_VID_REG(n, 0x0014) |
| #define DISPC_VID_FIFO_SIZE_STATUS(n) DISPC_VID_REG(n, 0x0018) |
| #define DISPC_VID_ROW_INC(n) DISPC_VID_REG(n, 0x001C) |
| #define DISPC_VID_PIXEL_INC(n) DISPC_VID_REG(n, 0x0020) |
| #define DISPC_VID_FIR(n) DISPC_VID_REG(n, 0x0024) |
| #define DISPC_VID_PICTURE_SIZE(n) DISPC_VID_REG(n, 0x0028) |
| #define DISPC_VID_ACCU0(n) DISPC_VID_REG(n, 0x002C) |
| #define DISPC_VID_ACCU1(n) DISPC_VID_REG(n, 0x0030) |
| |
| /* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ |
| #define DISPC_VID_FIR_COEF_H(n, i) DISPC_REG(0x00F0 + (n)*0x90 + (i)*0x8) |
| /* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ |
| #define DISPC_VID_FIR_COEF_HV(n, i) DISPC_REG(0x00F4 + (n)*0x90 + (i)*0x8) |
| /* coef index i = {0, 1, 2, 3, 4} */ |
| #define DISPC_VID_CONV_COEF(n, i) DISPC_REG(0x0130 + (n)*0x90 + (i)*0x4) |
| /* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ |
| #define DISPC_VID_FIR_COEF_V(n, i) DISPC_REG(0x01E0 + (n)*0x20 + (i)*0x4) |
| |
| #define DISPC_VID_PRELOAD(n) DISPC_REG(0x230 + (n)*0x04) |
| |
| |
| #define DISPC_IRQ_MASK_ERROR (DISPC_IRQ_GFX_FIFO_UNDERFLOW | \ |
| DISPC_IRQ_OCP_ERR | \ |
| DISPC_IRQ_VID1_FIFO_UNDERFLOW | \ |
| DISPC_IRQ_VID2_FIFO_UNDERFLOW | \ |
| DISPC_IRQ_SYNC_LOST | \ |
| DISPC_IRQ_SYNC_LOST_DIGIT) |
| |
| #define DISPC_MAX_NR_ISRS 8 |
| |
| struct omap_dispc_isr_data { |
| omap_dispc_isr_t isr; |
| void *arg; |
| u32 mask; |
| }; |
| |
| #define REG_GET(idx, start, end) \ |
| FLD_GET(dispc_read_reg(idx), start, end) |
| |
| #define REG_FLD_MOD(idx, val, start, end) \ |
| dispc_write_reg(idx, FLD_MOD(dispc_read_reg(idx), val, start, end)) |
| |
| static const struct dispc_reg dispc_reg_att[] = { DISPC_GFX_ATTRIBUTES, |
| DISPC_VID_ATTRIBUTES(0), |
| DISPC_VID_ATTRIBUTES(1) }; |
| |
| static struct { |
| void __iomem *base; |
| |
| u32 fifo_size[3]; |
| |
| spinlock_t irq_lock; |
| u32 irq_error_mask; |
| struct omap_dispc_isr_data registered_isr[DISPC_MAX_NR_ISRS]; |
| u32 error_irqs; |
| struct work_struct error_work; |
| |
| u32 ctx[DISPC_SZ_REGS / sizeof(u32)]; |
| } dispc; |
| |
| static void _omap_dispc_set_irqs(void); |
| |
| static inline void dispc_write_reg(const struct dispc_reg idx, u32 val) |
| { |
| __raw_writel(val, dispc.base + idx.idx); |
| } |
| |
| static inline u32 dispc_read_reg(const struct dispc_reg idx) |
| { |
| return __raw_readl(dispc.base + idx.idx); |
| } |
| |
| #define SR(reg) \ |
| dispc.ctx[(DISPC_##reg).idx / sizeof(u32)] = dispc_read_reg(DISPC_##reg) |
| #define RR(reg) \ |
| dispc_write_reg(DISPC_##reg, dispc.ctx[(DISPC_##reg).idx / sizeof(u32)]) |
| |
| void dispc_save_context(void) |
| { |
| if (cpu_is_omap24xx()) |
| return; |
| |
| SR(SYSCONFIG); |
| SR(IRQENABLE); |
| SR(CONTROL); |
| SR(CONFIG); |
| SR(DEFAULT_COLOR0); |
| SR(DEFAULT_COLOR1); |
| SR(TRANS_COLOR0); |
| SR(TRANS_COLOR1); |
| SR(LINE_NUMBER); |
| SR(TIMING_H); |
| SR(TIMING_V); |
| SR(POL_FREQ); |
| SR(DIVISOR); |
| SR(GLOBAL_ALPHA); |
| SR(SIZE_DIG); |
| SR(SIZE_LCD); |
| |
| SR(GFX_BA0); |
| SR(GFX_BA1); |
| SR(GFX_POSITION); |
| SR(GFX_SIZE); |
| SR(GFX_ATTRIBUTES); |
| SR(GFX_FIFO_THRESHOLD); |
| SR(GFX_ROW_INC); |
| SR(GFX_PIXEL_INC); |
| SR(GFX_WINDOW_SKIP); |
| SR(GFX_TABLE_BA); |
| |
| SR(DATA_CYCLE1); |
| SR(DATA_CYCLE2); |
| SR(DATA_CYCLE3); |
| |
| SR(CPR_COEF_R); |
| SR(CPR_COEF_G); |
| SR(CPR_COEF_B); |
| |
| SR(GFX_PRELOAD); |
| |
| /* VID1 */ |
| SR(VID_BA0(0)); |
| SR(VID_BA1(0)); |
| SR(VID_POSITION(0)); |
| SR(VID_SIZE(0)); |
| SR(VID_ATTRIBUTES(0)); |
| SR(VID_FIFO_THRESHOLD(0)); |
| SR(VID_ROW_INC(0)); |
| SR(VID_PIXEL_INC(0)); |
| SR(VID_FIR(0)); |
| SR(VID_PICTURE_SIZE(0)); |
| SR(VID_ACCU0(0)); |
| SR(VID_ACCU1(0)); |
| |
| SR(VID_FIR_COEF_H(0, 0)); |
| SR(VID_FIR_COEF_H(0, 1)); |
| SR(VID_FIR_COEF_H(0, 2)); |
| SR(VID_FIR_COEF_H(0, 3)); |
| SR(VID_FIR_COEF_H(0, 4)); |
| SR(VID_FIR_COEF_H(0, 5)); |
| SR(VID_FIR_COEF_H(0, 6)); |
| SR(VID_FIR_COEF_H(0, 7)); |
| |
| SR(VID_FIR_COEF_HV(0, 0)); |
| SR(VID_FIR_COEF_HV(0, 1)); |
| SR(VID_FIR_COEF_HV(0, 2)); |
| SR(VID_FIR_COEF_HV(0, 3)); |
| SR(VID_FIR_COEF_HV(0, 4)); |
| SR(VID_FIR_COEF_HV(0, 5)); |
| SR(VID_FIR_COEF_HV(0, 6)); |
| SR(VID_FIR_COEF_HV(0, 7)); |
| |
| SR(VID_CONV_COEF(0, 0)); |
| SR(VID_CONV_COEF(0, 1)); |
| SR(VID_CONV_COEF(0, 2)); |
| SR(VID_CONV_COEF(0, 3)); |
| SR(VID_CONV_COEF(0, 4)); |
| |
| SR(VID_FIR_COEF_V(0, 0)); |
| SR(VID_FIR_COEF_V(0, 1)); |
| SR(VID_FIR_COEF_V(0, 2)); |
| SR(VID_FIR_COEF_V(0, 3)); |
| SR(VID_FIR_COEF_V(0, 4)); |
| SR(VID_FIR_COEF_V(0, 5)); |
| SR(VID_FIR_COEF_V(0, 6)); |
| SR(VID_FIR_COEF_V(0, 7)); |
| |
| SR(VID_PRELOAD(0)); |
| |
| /* VID2 */ |
| SR(VID_BA0(1)); |
| SR(VID_BA1(1)); |
| SR(VID_POSITION(1)); |
| SR(VID_SIZE(1)); |
| SR(VID_ATTRIBUTES(1)); |
| SR(VID_FIFO_THRESHOLD(1)); |
| SR(VID_ROW_INC(1)); |
| SR(VID_PIXEL_INC(1)); |
| SR(VID_FIR(1)); |
| SR(VID_PICTURE_SIZE(1)); |
| SR(VID_ACCU0(1)); |
| SR(VID_ACCU1(1)); |
| |
| SR(VID_FIR_COEF_H(1, 0)); |
| SR(VID_FIR_COEF_H(1, 1)); |
| SR(VID_FIR_COEF_H(1, 2)); |
| SR(VID_FIR_COEF_H(1, 3)); |
| SR(VID_FIR_COEF_H(1, 4)); |
| SR(VID_FIR_COEF_H(1, 5)); |
| SR(VID_FIR_COEF_H(1, 6)); |
| SR(VID_FIR_COEF_H(1, 7)); |
| |
| SR(VID_FIR_COEF_HV(1, 0)); |
| SR(VID_FIR_COEF_HV(1, 1)); |
| SR(VID_FIR_COEF_HV(1, 2)); |
| SR(VID_FIR_COEF_HV(1, 3)); |
| SR(VID_FIR_COEF_HV(1, 4)); |
| SR(VID_FIR_COEF_HV(1, 5)); |
| SR(VID_FIR_COEF_HV(1, 6)); |
| SR(VID_FIR_COEF_HV(1, 7)); |
| |
| SR(VID_CONV_COEF(1, 0)); |
| SR(VID_CONV_COEF(1, 1)); |
| SR(VID_CONV_COEF(1, 2)); |
| SR(VID_CONV_COEF(1, 3)); |
| SR(VID_CONV_COEF(1, 4)); |
| |
| SR(VID_FIR_COEF_V(1, 0)); |
| SR(VID_FIR_COEF_V(1, 1)); |
| SR(VID_FIR_COEF_V(1, 2)); |
| SR(VID_FIR_COEF_V(1, 3)); |
| SR(VID_FIR_COEF_V(1, 4)); |
| SR(VID_FIR_COEF_V(1, 5)); |
| SR(VID_FIR_COEF_V(1, 6)); |
| SR(VID_FIR_COEF_V(1, 7)); |
| |
| SR(VID_PRELOAD(1)); |
| } |
| |
| void dispc_restore_context(void) |
| { |
| RR(SYSCONFIG); |
| RR(IRQENABLE); |
| /*RR(CONTROL);*/ |
| RR(CONFIG); |
| RR(DEFAULT_COLOR0); |
| RR(DEFAULT_COLOR1); |
| RR(TRANS_COLOR0); |
| RR(TRANS_COLOR1); |
| RR(LINE_NUMBER); |
| RR(TIMING_H); |
| RR(TIMING_V); |
| RR(POL_FREQ); |
| RR(DIVISOR); |
| RR(GLOBAL_ALPHA); |
| RR(SIZE_DIG); |
| RR(SIZE_LCD); |
| |
| RR(GFX_BA0); |
| RR(GFX_BA1); |
| RR(GFX_POSITION); |
| RR(GFX_SIZE); |
| RR(GFX_ATTRIBUTES); |
| RR(GFX_FIFO_THRESHOLD); |
| RR(GFX_ROW_INC); |
| RR(GFX_PIXEL_INC); |
| RR(GFX_WINDOW_SKIP); |
| RR(GFX_TABLE_BA); |
| |
| RR(DATA_CYCLE1); |
| RR(DATA_CYCLE2); |
| RR(DATA_CYCLE3); |
| |
| RR(CPR_COEF_R); |
| RR(CPR_COEF_G); |
| RR(CPR_COEF_B); |
| |
| RR(GFX_PRELOAD); |
| |
| /* VID1 */ |
| RR(VID_BA0(0)); |
| RR(VID_BA1(0)); |
| RR(VID_POSITION(0)); |
| RR(VID_SIZE(0)); |
| RR(VID_ATTRIBUTES(0)); |
| RR(VID_FIFO_THRESHOLD(0)); |
| RR(VID_ROW_INC(0)); |
| RR(VID_PIXEL_INC(0)); |
| RR(VID_FIR(0)); |
| RR(VID_PICTURE_SIZE(0)); |
| RR(VID_ACCU0(0)); |
| RR(VID_ACCU1(0)); |
| |
| RR(VID_FIR_COEF_H(0, 0)); |
| RR(VID_FIR_COEF_H(0, 1)); |
| RR(VID_FIR_COEF_H(0, 2)); |
| RR(VID_FIR_COEF_H(0, 3)); |
| RR(VID_FIR_COEF_H(0, 4)); |
| RR(VID_FIR_COEF_H(0, 5)); |
| RR(VID_FIR_COEF_H(0, 6)); |
| RR(VID_FIR_COEF_H(0, 7)); |
| |
| RR(VID_FIR_COEF_HV(0, 0)); |
| RR(VID_FIR_COEF_HV(0, 1)); |
| RR(VID_FIR_COEF_HV(0, 2)); |
| RR(VID_FIR_COEF_HV(0, 3)); |
| RR(VID_FIR_COEF_HV(0, 4)); |
| RR(VID_FIR_COEF_HV(0, 5)); |
| RR(VID_FIR_COEF_HV(0, 6)); |
| RR(VID_FIR_COEF_HV(0, 7)); |
| |
| RR(VID_CONV_COEF(0, 0)); |
| RR(VID_CONV_COEF(0, 1)); |
| RR(VID_CONV_COEF(0, 2)); |
| RR(VID_CONV_COEF(0, 3)); |
| RR(VID_CONV_COEF(0, 4)); |
| |
| RR(VID_FIR_COEF_V(0, 0)); |
| RR(VID_FIR_COEF_V(0, 1)); |
| RR(VID_FIR_COEF_V(0, 2)); |
| RR(VID_FIR_COEF_V(0, 3)); |
| RR(VID_FIR_COEF_V(0, 4)); |
| RR(VID_FIR_COEF_V(0, 5)); |
| RR(VID_FIR_COEF_V(0, 6)); |
| RR(VID_FIR_COEF_V(0, 7)); |
| |
| RR(VID_PRELOAD(0)); |
| |
| /* VID2 */ |
| RR(VID_BA0(1)); |
| RR(VID_BA1(1)); |
| RR(VID_POSITION(1)); |
| RR(VID_SIZE(1)); |
| RR(VID_ATTRIBUTES(1)); |
| RR(VID_FIFO_THRESHOLD(1)); |
| RR(VID_ROW_INC(1)); |
| RR(VID_PIXEL_INC(1)); |
| RR(VID_FIR(1)); |
| RR(VID_PICTURE_SIZE(1)); |
| RR(VID_ACCU0(1)); |
| RR(VID_ACCU1(1)); |
| |
| RR(VID_FIR_COEF_H(1, 0)); |
| RR(VID_FIR_COEF_H(1, 1)); |
| RR(VID_FIR_COEF_H(1, 2)); |
| RR(VID_FIR_COEF_H(1, 3)); |
| RR(VID_FIR_COEF_H(1, 4)); |
| RR(VID_FIR_COEF_H(1, 5)); |
| RR(VID_FIR_COEF_H(1, 6)); |
| RR(VID_FIR_COEF_H(1, 7)); |
| |
| RR(VID_FIR_COEF_HV(1, 0)); |
| RR(VID_FIR_COEF_HV(1, 1)); |
| RR(VID_FIR_COEF_HV(1, 2)); |
| RR(VID_FIR_COEF_HV(1, 3)); |
| RR(VID_FIR_COEF_HV(1, 4)); |
| RR(VID_FIR_COEF_HV(1, 5)); |
| RR(VID_FIR_COEF_HV(1, 6)); |
| RR(VID_FIR_COEF_HV(1, 7)); |
| |
| RR(VID_CONV_COEF(1, 0)); |
| RR(VID_CONV_COEF(1, 1)); |
| RR(VID_CONV_COEF(1, 2)); |
| RR(VID_CONV_COEF(1, 3)); |
| RR(VID_CONV_COEF(1, 4)); |
| |
| RR(VID_FIR_COEF_V(1, 0)); |
| RR(VID_FIR_COEF_V(1, 1)); |
| RR(VID_FIR_COEF_V(1, 2)); |
| RR(VID_FIR_COEF_V(1, 3)); |
| RR(VID_FIR_COEF_V(1, 4)); |
| RR(VID_FIR_COEF_V(1, 5)); |
| RR(VID_FIR_COEF_V(1, 6)); |
| RR(VID_FIR_COEF_V(1, 7)); |
| |
| RR(VID_PRELOAD(1)); |
| |
| /* enable last, because LCD & DIGIT enable are here */ |
| RR(CONTROL); |
| } |
| |
| #undef SR |
| #undef RR |
| |
| static inline void enable_clocks(bool enable) |
| { |
| if (enable) |
| dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); |
| else |
| dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); |
| } |
| |
| bool dispc_go_busy(enum omap_channel channel) |
| { |
| int bit; |
| |
| if (channel == OMAP_DSS_CHANNEL_LCD) |
| bit = 5; /* GOLCD */ |
| else |
| bit = 6; /* GODIGIT */ |
| |
| return REG_GET(DISPC_CONTROL, bit, bit) == 1; |
| } |
| |
| void dispc_go(enum omap_channel channel) |
| { |
| int bit; |
| |
| enable_clocks(1); |
| |
| if (channel == OMAP_DSS_CHANNEL_LCD) |
| bit = 0; /* LCDENABLE */ |
| else |
| bit = 1; /* DIGITALENABLE */ |
| |
| /* if the channel is not enabled, we don't need GO */ |
| if (REG_GET(DISPC_CONTROL, bit, bit) == 0) |
| goto end; |
| |
| if (channel == OMAP_DSS_CHANNEL_LCD) |
| bit = 5; /* GOLCD */ |
| else |
| bit = 6; /* GODIGIT */ |
| |
| if (REG_GET(DISPC_CONTROL, bit, bit) == 1) { |
| DSSERR("GO bit not down for channel %d\n", channel); |
| goto end; |
| } |
| |
| DSSDBG("GO %s\n", channel == OMAP_DSS_CHANNEL_LCD ? "LCD" : "DIGIT"); |
| |
| REG_FLD_MOD(DISPC_CONTROL, 1, bit, bit); |
| end: |
| enable_clocks(0); |
| } |
| |
| static void _dispc_write_firh_reg(enum omap_plane plane, int reg, u32 value) |
| { |
| BUG_ON(plane == OMAP_DSS_GFX); |
| |
| dispc_write_reg(DISPC_VID_FIR_COEF_H(plane-1, reg), value); |
| } |
| |
| static void _dispc_write_firhv_reg(enum omap_plane plane, int reg, u32 value) |
| { |
| BUG_ON(plane == OMAP_DSS_GFX); |
| |
| dispc_write_reg(DISPC_VID_FIR_COEF_HV(plane-1, reg), value); |
| } |
| |
| static void _dispc_write_firv_reg(enum omap_plane plane, int reg, u32 value) |
| { |
| BUG_ON(plane == OMAP_DSS_GFX); |
| |
| dispc_write_reg(DISPC_VID_FIR_COEF_V(plane-1, reg), value); |
| } |
| |
| static void _dispc_set_scale_coef(enum omap_plane plane, int hscaleup, |
| int vscaleup, int five_taps) |
| { |
| /* Coefficients for horizontal up-sampling */ |
| static const u32 coef_hup[8] = { |
| 0x00800000, |
| 0x0D7CF800, |
| 0x1E70F5FF, |
| 0x335FF5FE, |
| 0xF74949F7, |
| 0xF55F33FB, |
| 0xF5701EFE, |
| 0xF87C0DFF, |
| }; |
| |
| /* Coefficients for horizontal down-sampling */ |
| static const u32 coef_hdown[8] = { |
| 0x24382400, |
| 0x28371FFE, |
| 0x2C361BFB, |
| 0x303516F9, |
| 0x11343311, |
| 0x1635300C, |
| 0x1B362C08, |
| 0x1F372804, |
| }; |
| |
| /* Coefficients for horizontal and vertical up-sampling */ |
| static const u32 coef_hvup[2][8] = { |
| { |
| 0x00800000, |
| 0x037B02FF, |
| 0x0C6F05FE, |
| 0x205907FB, |
| 0x00404000, |
| 0x075920FE, |
| 0x056F0CFF, |
| 0x027B0300, |
| }, |
| { |
| 0x00800000, |
| 0x0D7CF8FF, |
| 0x1E70F5FE, |
| 0x335FF5FB, |
| 0xF7404000, |
| 0xF55F33FE, |
| 0xF5701EFF, |
| 0xF87C0D00, |
| }, |
| }; |
| |
| /* Coefficients for horizontal and vertical down-sampling */ |
| static const u32 coef_hvdown[2][8] = { |
| { |
| 0x24382400, |
| 0x28391F04, |
| 0x2D381B08, |
| 0x3237170C, |
| 0x123737F7, |
| 0x173732F9, |
| 0x1B382DFB, |
| 0x1F3928FE, |
| }, |
| { |
| 0x24382400, |
| 0x28371F04, |
| 0x2C361B08, |
| 0x3035160C, |
| 0x113433F7, |
| 0x163530F9, |
| 0x1B362CFB, |
| 0x1F3728FE, |
| }, |
| }; |
| |
| /* Coefficients for vertical up-sampling */ |
| static const u32 coef_vup[8] = { |
| 0x00000000, |
| 0x0000FF00, |
| 0x0000FEFF, |
| 0x0000FBFE, |
| 0x000000F7, |
| 0x0000FEFB, |
| 0x0000FFFE, |
| 0x000000FF, |
| }; |
| |
| |
| /* Coefficients for vertical down-sampling */ |
| static const u32 coef_vdown[8] = { |
| 0x00000000, |
| 0x000004FE, |
| 0x000008FB, |
| 0x00000CF9, |
| 0x0000F711, |
| 0x0000F90C, |
| 0x0000FB08, |
| 0x0000FE04, |
| }; |
| |
| const u32 *h_coef; |
| const u32 *hv_coef; |
| const u32 *hv_coef_mod; |
| const u32 *v_coef; |
| int i; |
| |
| if (hscaleup) |
| h_coef = coef_hup; |
| else |
| h_coef = coef_hdown; |
| |
| if (vscaleup) { |
| hv_coef = coef_hvup[five_taps]; |
| v_coef = coef_vup; |
| |
| if (hscaleup) |
| hv_coef_mod = NULL; |
| else |
| hv_coef_mod = coef_hvdown[five_taps]; |
| } else { |
| hv_coef = coef_hvdown[five_taps]; |
| v_coef = coef_vdown; |
| |
| if (hscaleup) |
| hv_coef_mod = coef_hvup[five_taps]; |
| else |
| hv_coef_mod = NULL; |
| } |
| |
| for (i = 0; i < 8; i++) { |
| u32 h, hv; |
| |
| h = h_coef[i]; |
| |
| hv = hv_coef[i]; |
| |
| if (hv_coef_mod) { |
| hv &= 0xffffff00; |
| hv |= (hv_coef_mod[i] & 0xff); |
| } |
| |
| _dispc_write_firh_reg(plane, i, h); |
| _dispc_write_firhv_reg(plane, i, hv); |
| } |
| |
| if (!five_taps) |
| return; |
| |
| for (i = 0; i < 8; i++) { |
| u32 v; |
| v = v_coef[i]; |
| _dispc_write_firv_reg(plane, i, v); |
| } |
| } |
| |
| static void _dispc_setup_color_conv_coef(void) |
| { |
| const struct color_conv_coef { |
| int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb; |
| int full_range; |
| } ctbl_bt601_5 = { |
| 298, 409, 0, 298, -208, -100, 298, 0, 517, 0, |
| }; |
| |
| const struct color_conv_coef *ct; |
| |
| #define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0)) |
| |
| ct = &ctbl_bt601_5; |
| |
| dispc_write_reg(DISPC_VID_CONV_COEF(0, 0), CVAL(ct->rcr, ct->ry)); |
| dispc_write_reg(DISPC_VID_CONV_COEF(0, 1), CVAL(ct->gy, ct->rcb)); |
| dispc_write_reg(DISPC_VID_CONV_COEF(0, 2), CVAL(ct->gcb, ct->gcr)); |
| dispc_write_reg(DISPC_VID_CONV_COEF(0, 3), CVAL(ct->bcr, ct->by)); |
| dispc_write_reg(DISPC_VID_CONV_COEF(0, 4), CVAL(0, ct->bcb)); |
| |
| dispc_write_reg(DISPC_VID_CONV_COEF(1, 0), CVAL(ct->rcr, ct->ry)); |
| dispc_write_reg(DISPC_VID_CONV_COEF(1, 1), CVAL(ct->gy, ct->rcb)); |
| dispc_write_reg(DISPC_VID_CONV_COEF(1, 2), CVAL(ct->gcb, ct->gcr)); |
| dispc_write_reg(DISPC_VID_CONV_COEF(1, 3), CVAL(ct->bcr, ct->by)); |
| dispc_write_reg(DISPC_VID_CONV_COEF(1, 4), CVAL(0, ct->bcb)); |
| |
| #undef CVAL |
| |
| REG_FLD_MOD(DISPC_VID_ATTRIBUTES(0), ct->full_range, 11, 11); |
| REG_FLD_MOD(DISPC_VID_ATTRIBUTES(1), ct->full_range, 11, 11); |
| } |
| |
| |
| static void _dispc_set_plane_ba0(enum omap_plane plane, u32 paddr) |
| { |
| const struct dispc_reg ba0_reg[] = { DISPC_GFX_BA0, |
| DISPC_VID_BA0(0), |
| DISPC_VID_BA0(1) }; |
| |
| dispc_write_reg(ba0_reg[plane], paddr); |
| } |
| |
| static void _dispc_set_plane_ba1(enum omap_plane plane, u32 paddr) |
| { |
| const struct dispc_reg ba1_reg[] = { DISPC_GFX_BA1, |
| DISPC_VID_BA1(0), |
| DISPC_VID_BA1(1) }; |
| |
| dispc_write_reg(ba1_reg[plane], paddr); |
| } |
| |
| static void _dispc_set_plane_pos(enum omap_plane plane, int x, int y) |
| { |
| const struct dispc_reg pos_reg[] = { DISPC_GFX_POSITION, |
| DISPC_VID_POSITION(0), |
| DISPC_VID_POSITION(1) }; |
| |
| u32 val = FLD_VAL(y, 26, 16) | FLD_VAL(x, 10, 0); |
| dispc_write_reg(pos_reg[plane], val); |
| } |
| |
| static void _dispc_set_pic_size(enum omap_plane plane, int width, int height) |
| { |
| const struct dispc_reg siz_reg[] = { DISPC_GFX_SIZE, |
| DISPC_VID_PICTURE_SIZE(0), |
| DISPC_VID_PICTURE_SIZE(1) }; |
| u32 val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); |
| dispc_write_reg(siz_reg[plane], val); |
| } |
| |
| static void _dispc_set_vid_size(enum omap_plane plane, int width, int height) |
| { |
| u32 val; |
| const struct dispc_reg vsi_reg[] = { DISPC_VID_SIZE(0), |
| DISPC_VID_SIZE(1) }; |
| |
| BUG_ON(plane == OMAP_DSS_GFX); |
| |
| val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); |
| dispc_write_reg(vsi_reg[plane-1], val); |
| } |
| |
| static void _dispc_setup_global_alpha(enum omap_plane plane, u8 global_alpha) |
| { |
| |
| BUG_ON(plane == OMAP_DSS_VIDEO1); |
| |
| if (cpu_is_omap24xx()) |
| return; |
| |
| if (plane == OMAP_DSS_GFX) |
| REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, 7, 0); |
| else if (plane == OMAP_DSS_VIDEO2) |
| REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, 23, 16); |
| } |
| |
| static void _dispc_set_pix_inc(enum omap_plane plane, s32 inc) |
| { |
| const struct dispc_reg ri_reg[] = { DISPC_GFX_PIXEL_INC, |
| DISPC_VID_PIXEL_INC(0), |
| DISPC_VID_PIXEL_INC(1) }; |
| |
| dispc_write_reg(ri_reg[plane], inc); |
| } |
| |
| static void _dispc_set_row_inc(enum omap_plane plane, s32 inc) |
| { |
| const struct dispc_reg ri_reg[] = { DISPC_GFX_ROW_INC, |
| DISPC_VID_ROW_INC(0), |
| DISPC_VID_ROW_INC(1) }; |
| |
| dispc_write_reg(ri_reg[plane], inc); |
| } |
| |
| static void _dispc_set_color_mode(enum omap_plane plane, |
| enum omap_color_mode color_mode) |
| { |
| u32 m = 0; |
| |
| switch (color_mode) { |
| case OMAP_DSS_COLOR_CLUT1: |
| m = 0x0; break; |
| case OMAP_DSS_COLOR_CLUT2: |
| m = 0x1; break; |
| case OMAP_DSS_COLOR_CLUT4: |
| m = 0x2; break; |
| case OMAP_DSS_COLOR_CLUT8: |
| m = 0x3; break; |
| case OMAP_DSS_COLOR_RGB12U: |
| m = 0x4; break; |
| case OMAP_DSS_COLOR_ARGB16: |
| m = 0x5; break; |
| case OMAP_DSS_COLOR_RGB16: |
| m = 0x6; break; |
| case OMAP_DSS_COLOR_RGB24U: |
| m = 0x8; break; |
| case OMAP_DSS_COLOR_RGB24P: |
| m = 0x9; break; |
| case OMAP_DSS_COLOR_YUV2: |
| m = 0xa; break; |
| case OMAP_DSS_COLOR_UYVY: |
| m = 0xb; break; |
| case OMAP_DSS_COLOR_ARGB32: |
| m = 0xc; break; |
| case OMAP_DSS_COLOR_RGBA32: |
| m = 0xd; break; |
| case OMAP_DSS_COLOR_RGBX32: |
| m = 0xe; break; |
| default: |
| BUG(); break; |
| } |
| |
| REG_FLD_MOD(dispc_reg_att[plane], m, 4, 1); |
| } |
| |
| static void _dispc_set_channel_out(enum omap_plane plane, |
| enum omap_channel channel) |
| { |
| int shift; |
| u32 val; |
| |
| switch (plane) { |
| case OMAP_DSS_GFX: |
| shift = 8; |
| break; |
| case OMAP_DSS_VIDEO1: |
| case OMAP_DSS_VIDEO2: |
| shift = 16; |
| break; |
| default: |
| BUG(); |
| return; |
| } |
| |
| val = dispc_read_reg(dispc_reg_att[plane]); |
| val = FLD_MOD(val, channel, shift, shift); |
| dispc_write_reg(dispc_reg_att[plane], val); |
| } |
| |
| void dispc_set_burst_size(enum omap_plane plane, |
| enum omap_burst_size burst_size) |
| { |
| int shift; |
| u32 val; |
| |
| enable_clocks(1); |
| |
| switch (plane) { |
| case OMAP_DSS_GFX: |
| shift = 6; |
| break; |
| case OMAP_DSS_VIDEO1: |
| case OMAP_DSS_VIDEO2: |
| shift = 14; |
| break; |
| default: |
| BUG(); |
| return; |
| } |
| |
| val = dispc_read_reg(dispc_reg_att[plane]); |
| val = FLD_MOD(val, burst_size, shift+1, shift); |
| dispc_write_reg(dispc_reg_att[plane], val); |
| |
| enable_clocks(0); |
| } |
| |
| static void _dispc_set_vid_color_conv(enum omap_plane plane, bool enable) |
| { |
| u32 val; |
| |
| BUG_ON(plane == OMAP_DSS_GFX); |
| |
| val = dispc_read_reg(dispc_reg_att[plane]); |
| val = FLD_MOD(val, enable, 9, 9); |
| dispc_write_reg(dispc_reg_att[plane], val); |
| } |
| |
| void dispc_enable_replication(enum omap_plane plane, bool enable) |
| { |
| int bit; |
| |
| if (plane == OMAP_DSS_GFX) |
| bit = 5; |
| else |
| bit = 10; |
| |
| enable_clocks(1); |
| REG_FLD_MOD(dispc_reg_att[plane], enable, bit, bit); |
| enable_clocks(0); |
| } |
| |
| void dispc_set_lcd_size(u16 width, u16 height) |
| { |
| u32 val; |
| BUG_ON((width > (1 << 11)) || (height > (1 << 11))); |
| val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); |
| enable_clocks(1); |
| dispc_write_reg(DISPC_SIZE_LCD, val); |
| enable_clocks(0); |
| } |
| |
| void dispc_set_digit_size(u16 width, u16 height) |
| { |
| u32 val; |
| BUG_ON((width > (1 << 11)) || (height > (1 << 11))); |
| val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); |
| enable_clocks(1); |
| dispc_write_reg(DISPC_SIZE_DIG, val); |
| enable_clocks(0); |
| } |
| |
| static void dispc_read_plane_fifo_sizes(void) |
| { |
| const struct dispc_reg fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS, |
| DISPC_VID_FIFO_SIZE_STATUS(0), |
| DISPC_VID_FIFO_SIZE_STATUS(1) }; |
| u32 size; |
| int plane; |
| |
| enable_clocks(1); |
| |
| for (plane = 0; plane < ARRAY_SIZE(dispc.fifo_size); ++plane) { |
| if (cpu_is_omap24xx()) |
| size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 8, 0); |
| else if (cpu_is_omap34xx()) |
| size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 10, 0); |
| else |
| BUG(); |
| |
| dispc.fifo_size[plane] = size; |
| } |
| |
| enable_clocks(0); |
| } |
| |
| u32 dispc_get_plane_fifo_size(enum omap_plane plane) |
| { |
| return dispc.fifo_size[plane]; |
| } |
| |
| void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high) |
| { |
| const struct dispc_reg ftrs_reg[] = { DISPC_GFX_FIFO_THRESHOLD, |
| DISPC_VID_FIFO_THRESHOLD(0), |
| DISPC_VID_FIFO_THRESHOLD(1) }; |
| enable_clocks(1); |
| |
| DSSDBG("fifo(%d) low/high old %u/%u, new %u/%u\n", |
| plane, |
| REG_GET(ftrs_reg[plane], 11, 0), |
| REG_GET(ftrs_reg[plane], 27, 16), |
| low, high); |
| |
| if (cpu_is_omap24xx()) |
| dispc_write_reg(ftrs_reg[plane], |
| FLD_VAL(high, 24, 16) | FLD_VAL(low, 8, 0)); |
| else |
| dispc_write_reg(ftrs_reg[plane], |
| FLD_VAL(high, 27, 16) | FLD_VAL(low, 11, 0)); |
| |
| enable_clocks(0); |
| } |
| |
| void dispc_enable_fifomerge(bool enable) |
| { |
| enable_clocks(1); |
| |
| DSSDBG("FIFO merge %s\n", enable ? "enabled" : "disabled"); |
| REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 14, 14); |
| |
| enable_clocks(0); |
| } |
| |
| static void _dispc_set_fir(enum omap_plane plane, int hinc, int vinc) |
| { |
| u32 val; |
| const struct dispc_reg fir_reg[] = { DISPC_VID_FIR(0), |
| DISPC_VID_FIR(1) }; |
| |
| BUG_ON(plane == OMAP_DSS_GFX); |
| |
| if (cpu_is_omap24xx()) |
| val = FLD_VAL(vinc, 27, 16) | FLD_VAL(hinc, 11, 0); |
| else |
| val = FLD_VAL(vinc, 28, 16) | FLD_VAL(hinc, 12, 0); |
| dispc_write_reg(fir_reg[plane-1], val); |
| } |
| |
| static void _dispc_set_vid_accu0(enum omap_plane plane, int haccu, int vaccu) |
| { |
| u32 val; |
| const struct dispc_reg ac0_reg[] = { DISPC_VID_ACCU0(0), |
| DISPC_VID_ACCU0(1) }; |
| |
| BUG_ON(plane == OMAP_DSS_GFX); |
| |
| val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0); |
| dispc_write_reg(ac0_reg[plane-1], val); |
| } |
| |
| static void _dispc_set_vid_accu1(enum omap_plane plane, int haccu, int vaccu) |
| { |
| u32 val; |
| const struct dispc_reg ac1_reg[] = { DISPC_VID_ACCU1(0), |
| DISPC_VID_ACCU1(1) }; |
| |
| BUG_ON(plane == OMAP_DSS_GFX); |
| |
| val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0); |
| dispc_write_reg(ac1_reg[plane-1], val); |
| } |
| |
| |
| static void _dispc_set_scaling(enum omap_plane plane, |
| u16 orig_width, u16 orig_height, |
| u16 out_width, u16 out_height, |
| bool ilace, bool five_taps, |
| bool fieldmode) |
| { |
| int fir_hinc; |
| int fir_vinc; |
| int hscaleup, vscaleup; |
| int accu0 = 0; |
| int accu1 = 0; |
| u32 l; |
| |
| BUG_ON(plane == OMAP_DSS_GFX); |
| |
| hscaleup = orig_width <= out_width; |
| vscaleup = orig_height <= out_height; |
| |
| _dispc_set_scale_coef(plane, hscaleup, vscaleup, five_taps); |
| |
| if (!orig_width || orig_width == out_width) |
| fir_hinc = 0; |
| else |
| fir_hinc = 1024 * orig_width / out_width; |
| |
| if (!orig_height || orig_height == out_height) |
| fir_vinc = 0; |
| else |
| fir_vinc = 1024 * orig_height / out_height; |
| |
| _dispc_set_fir(plane, fir_hinc, fir_vinc); |
| |
| l = dispc_read_reg(dispc_reg_att[plane]); |
| l &= ~((0x0f << 5) | (0x3 << 21)); |
| |
| l |= fir_hinc ? (1 << 5) : 0; |
| l |= fir_vinc ? (1 << 6) : 0; |
| |
| l |= hscaleup ? 0 : (1 << 7); |
| l |= vscaleup ? 0 : (1 << 8); |
| |
| l |= five_taps ? (1 << 21) : 0; |
| l |= five_taps ? (1 << 22) : 0; |
| |
| dispc_write_reg(dispc_reg_att[plane], l); |
| |
| /* |
| * field 0 = even field = bottom field |
| * field 1 = odd field = top field |
| */ |
| if (ilace && !fieldmode) { |
| accu1 = 0; |
| accu0 = (fir_vinc / 2) & 0x3ff; |
| if (accu0 >= 1024/2) { |
| accu1 = 1024/2; |
| accu0 -= accu1; |
| } |
| } |
| |
| _dispc_set_vid_accu0(plane, 0, accu0); |
| _dispc_set_vid_accu1(plane, 0, accu1); |
| } |
| |
| static void _dispc_set_rotation_attrs(enum omap_plane plane, u8 rotation, |
| bool mirroring, enum omap_color_mode color_mode) |
| { |
| if (color_mode == OMAP_DSS_COLOR_YUV2 || |
| color_mode == OMAP_DSS_COLOR_UYVY) { |
| int vidrot = 0; |
| |
| if (mirroring) { |
| switch (rotation) { |
| case OMAP_DSS_ROT_0: |
| vidrot = 2; |
| break; |
| case OMAP_DSS_ROT_90: |
| vidrot = 1; |
| break; |
| case OMAP_DSS_ROT_180: |
| vidrot = 0; |
| break; |
| case OMAP_DSS_ROT_270: |
| vidrot = 3; |
| break; |
| } |
| } else { |
| switch (rotation) { |
| case OMAP_DSS_ROT_0: |
| vidrot = 0; |
| break; |
| case OMAP_DSS_ROT_90: |
| vidrot = 1; |
| break; |
| case OMAP_DSS_ROT_180: |
| vidrot = 2; |
| break; |
| case OMAP_DSS_ROT_270: |
| vidrot = 3; |
| break; |
| } |
| } |
| |
| REG_FLD_MOD(dispc_reg_att[plane], vidrot, 13, 12); |
| |
| if (rotation == OMAP_DSS_ROT_90 || rotation == OMAP_DSS_ROT_270) |
| REG_FLD_MOD(dispc_reg_att[plane], 0x1, 18, 18); |
| else |
| REG_FLD_MOD(dispc_reg_att[plane], 0x0, 18, 18); |
| } else { |
| REG_FLD_MOD(dispc_reg_att[plane], 0, 13, 12); |
| REG_FLD_MOD(dispc_reg_att[plane], 0, 18, 18); |
| } |
| } |
| |
| static int color_mode_to_bpp(enum omap_color_mode color_mode) |
| { |
| switch (color_mode) { |
| case OMAP_DSS_COLOR_CLUT1: |
| return 1; |
| case OMAP_DSS_COLOR_CLUT2: |
| return 2; |
| case OMAP_DSS_COLOR_CLUT4: |
| return 4; |
| case OMAP_DSS_COLOR_CLUT8: |
| return 8; |
| case OMAP_DSS_COLOR_RGB12U: |
| case OMAP_DSS_COLOR_RGB16: |
| case OMAP_DSS_COLOR_ARGB16: |
| case OMAP_DSS_COLOR_YUV2: |
| case OMAP_DSS_COLOR_UYVY: |
| return 16; |
| case OMAP_DSS_COLOR_RGB24P: |
| return 24; |
| case OMAP_DSS_COLOR_RGB24U: |
| case OMAP_DSS_COLOR_ARGB32: |
| case OMAP_DSS_COLOR_RGBA32: |
| case OMAP_DSS_COLOR_RGBX32: |
| return 32; |
| default: |
| BUG(); |
| } |
| } |
| |
| static s32 pixinc(int pixels, u8 ps) |
| { |
| if (pixels == 1) |
| return 1; |
| else if (pixels > 1) |
| return 1 + (pixels - 1) * ps; |
| else if (pixels < 0) |
| return 1 - (-pixels + 1) * ps; |
| else |
| BUG(); |
| } |
| |
| static void calc_vrfb_rotation_offset(u8 rotation, bool mirror, |
| u16 screen_width, |
| u16 width, u16 height, |
| enum omap_color_mode color_mode, bool fieldmode, |
| unsigned int field_offset, |
| unsigned *offset0, unsigned *offset1, |
| s32 *row_inc, s32 *pix_inc) |
| { |
| u8 ps; |
| |
| /* FIXME CLUT formats */ |
| switch (color_mode) { |
| case OMAP_DSS_COLOR_CLUT1: |
| case OMAP_DSS_COLOR_CLUT2: |
| case OMAP_DSS_COLOR_CLUT4: |
| case OMAP_DSS_COLOR_CLUT8: |
| BUG(); |
| return; |
| case OMAP_DSS_COLOR_YUV2: |
| case OMAP_DSS_COLOR_UYVY: |
| ps = 4; |
| break; |
| default: |
| ps = color_mode_to_bpp(color_mode) / 8; |
| break; |
| } |
| |
| DSSDBG("calc_rot(%d): scrw %d, %dx%d\n", rotation, screen_width, |
| width, height); |
| |
| /* |
| * field 0 = even field = bottom field |
| * field 1 = odd field = top field |
| */ |
| switch (rotation + mirror * 4) { |
| case OMAP_DSS_ROT_0: |
| case OMAP_DSS_ROT_180: |
| /* |
| * If the pixel format is YUV or UYVY divide the width |
| * of the image by 2 for 0 and 180 degree rotation. |
| */ |
| if (color_mode == OMAP_DSS_COLOR_YUV2 || |
| color_mode == OMAP_DSS_COLOR_UYVY) |
| width = width >> 1; |
| case OMAP_DSS_ROT_90: |
| case OMAP_DSS_ROT_270: |
| *offset1 = 0; |
| if (field_offset) |
| *offset0 = field_offset * screen_width * ps; |
| else |
| *offset0 = 0; |
| |
| *row_inc = pixinc(1 + (screen_width - width) + |
| (fieldmode ? screen_width : 0), |
| ps); |
| *pix_inc = pixinc(1, ps); |
| break; |
| |
| case OMAP_DSS_ROT_0 + 4: |
| case OMAP_DSS_ROT_180 + 4: |
| /* If the pixel format is YUV or UYVY divide the width |
| * of the image by 2 for 0 degree and 180 degree |
| */ |
| if (color_mode == OMAP_DSS_COLOR_YUV2 || |
| color_mode == OMAP_DSS_COLOR_UYVY) |
| width = width >> 1; |
| case OMAP_DSS_ROT_90 + 4: |
| case OMAP_DSS_ROT_270 + 4: |
| *offset1 = 0; |
| if (field_offset) |
| *offset0 = field_offset * screen_width * ps; |
| else |
| *offset0 = 0; |
| *row_inc = pixinc(1 - (screen_width + width) - |
| (fieldmode ? screen_width : 0), |
| ps); |
| *pix_inc = pixinc(1, ps); |
| break; |
| |
| default: |
| BUG(); |
| } |
| } |
| |
| static void calc_dma_rotation_offset(u8 rotation, bool mirror, |
| u16 screen_width, |
| u16 width, u16 height, |
| enum omap_color_mode color_mode, bool fieldmode, |
| unsigned int field_offset, |
| unsigned *offset0, unsigned *offset1, |
| s32 *row_inc, s32 *pix_inc) |
| { |
| u8 ps; |
| u16 fbw, fbh; |
| |
| /* FIXME CLUT formats */ |
| switch (color_mode) { |
| case OMAP_DSS_COLOR_CLUT1: |
| case OMAP_DSS_COLOR_CLUT2: |
| case OMAP_DSS_COLOR_CLUT4: |
| case OMAP_DSS_COLOR_CLUT8: |
| BUG(); |
| return; |
| default: |
| ps = color_mode_to_bpp(color_mode) / 8; |
| break; |
| } |
| |
| DSSDBG("calc_rot(%d): scrw %d, %dx%d\n", rotation, screen_width, |
| width, height); |
| |
| /* width & height are overlay sizes, convert to fb sizes */ |
| |
| if (rotation == OMAP_DSS_ROT_0 || rotation == OMAP_DSS_ROT_180) { |
| fbw = width; |
| fbh = height; |
| } else { |
| fbw = height; |
| fbh = width; |
| } |
| |
| /* |
| * field 0 = even field = bottom field |
| * field 1 = odd field = top field |
| */ |
| switch (rotation + mirror * 4) { |
| case OMAP_DSS_ROT_0: |
| *offset1 = 0; |
| if (field_offset) |
| *offset0 = *offset1 + field_offset * screen_width * ps; |
| else |
| *offset0 = *offset1; |
| *row_inc = pixinc(1 + (screen_width - fbw) + |
| (fieldmode ? screen_width : 0), |
| ps); |
| *pix_inc = pixinc(1, ps); |
| break; |
| case OMAP_DSS_ROT_90: |
| *offset1 = screen_width * (fbh - 1) * ps; |
| if (field_offset) |
| *offset0 = *offset1 + field_offset * ps; |
| else |
| *offset0 = *offset1; |
| *row_inc = pixinc(screen_width * (fbh - 1) + 1 + |
| (fieldmode ? 1 : 0), ps); |
| *pix_inc = pixinc(-screen_width, ps); |
| break; |
| case OMAP_DSS_ROT_180: |
| *offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps; |
| if (field_offset) |
| *offset0 = *offset1 - field_offset * screen_width * ps; |
| else |
| *offset0 = *offset1; |
| *row_inc = pixinc(-1 - |
| (screen_width - fbw) - |
| (fieldmode ? screen_width : 0), |
| ps); |
| *pix_inc = pixinc(-1, ps); |
| break; |
| case OMAP_DSS_ROT_270: |
| *offset1 = (fbw - 1) * ps; |
| if (field_offset) |
| *offset0 = *offset1 - field_offset * ps; |
| else |
| *offset0 = *offset1; |
| *row_inc = pixinc(-screen_width * (fbh - 1) - 1 - |
| (fieldmode ? 1 : 0), ps); |
| *pix_inc = pixinc(screen_width, ps); |
| break; |
| |
| /* mirroring */ |
| case OMAP_DSS_ROT_0 + 4: |
| *offset1 = (fbw - 1) * ps; |
| if (field_offset) |
| *offset0 = *offset1 + field_offset * screen_width * ps; |
| else |
| *offset0 = *offset1; |
| *row_inc = pixinc(screen_width * 2 - 1 + |
| (fieldmode ? screen_width : 0), |
| ps); |
| *pix_inc = pixinc(-1, ps); |
| break; |
| |
| case OMAP_DSS_ROT_90 + 4: |
| *offset1 = 0; |
| if (field_offset) |
| *offset0 = *offset1 + field_offset * ps; |
| else |
| *offset0 = *offset1; |
| *row_inc = pixinc(-screen_width * (fbh - 1) + 1 + |
| (fieldmode ? 1 : 0), |
| ps); |
| *pix_inc = pixinc(screen_width, ps); |
| break; |
| |
| case OMAP_DSS_ROT_180 + 4: |
| *offset1 = screen_width * (fbh - 1) * ps; |
| if (field_offset) |
| *offset0 = *offset1 - field_offset * screen_width * ps; |
| else |
| *offset0 = *offset1; |
| *row_inc = pixinc(1 - screen_width * 2 - |
| (fieldmode ? screen_width : 0), |
| ps); |
| *pix_inc = pixinc(1, ps); |
| break; |
| |
| case OMAP_DSS_ROT_270 + 4: |
| *offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps; |
| if (field_offset) |
| *offset0 = *offset1 - field_offset * ps; |
| else |
| *offset0 = *offset1; |
| *row_inc = pixinc(screen_width * (fbh - 1) - 1 - |
| (fieldmode ? 1 : 0), |
| ps); |
| *pix_inc = pixinc(-screen_width, ps); |
| break; |
| |
| default: |
| BUG(); |
| } |
| } |
| |
| static unsigned long calc_fclk_five_taps(u16 width, u16 height, |
| u16 out_width, u16 out_height, enum omap_color_mode color_mode) |
| { |
| u32 fclk = 0; |
| /* FIXME venc pclk? */ |
| u64 tmp, pclk = dispc_pclk_rate(); |
| |
| if (height > out_height) { |
| /* FIXME get real display PPL */ |
| unsigned int ppl = 800; |
| |
| tmp = pclk * height * out_width; |
| do_div(tmp, 2 * out_height * ppl); |
| fclk = tmp; |
| |
| if (height > 2 * out_height && ppl != out_width) { |
| tmp = pclk * (height - 2 * out_height) * out_width; |
| do_div(tmp, 2 * out_height * (ppl - out_width)); |
| fclk = max(fclk, (u32) tmp); |
| } |
| } |
| |
| if (width > out_width) { |
| tmp = pclk * width; |
| do_div(tmp, out_width); |
| fclk = max(fclk, (u32) tmp); |
| |
| if (color_mode == OMAP_DSS_COLOR_RGB24U) |
| fclk <<= 1; |
| } |
| |
| return fclk; |
| } |
| |
| static unsigned long calc_fclk(u16 width, u16 height, |
| u16 out_width, u16 out_height) |
| { |
| unsigned int hf, vf; |
| |
| /* |
| * FIXME how to determine the 'A' factor |
| * for the no downscaling case ? |
| */ |
| |
| if (width > 3 * out_width) |
| hf = 4; |
| else if (width > 2 * out_width) |
| hf = 3; |
| else if (width > out_width) |
| hf = 2; |
| else |
| hf = 1; |
| |
| if (height > out_height) |
| vf = 2; |
| else |
| vf = 1; |
| |
| /* FIXME venc pclk? */ |
| return dispc_pclk_rate() * vf * hf; |
| } |
| |
| void dispc_set_channel_out(enum omap_plane plane, enum omap_channel channel_out) |
| { |
| enable_clocks(1); |
| _dispc_set_channel_out(plane, channel_out); |
| enable_clocks(0); |
| } |
| |
| static int _dispc_setup_plane(enum omap_plane plane, |
| u32 paddr, u16 screen_width, |
| u16 pos_x, u16 pos_y, |
| u16 width, u16 height, |
| u16 out_width, u16 out_height, |
| enum omap_color_mode color_mode, |
| bool ilace, |
| enum omap_dss_rotation_type rotation_type, |
| u8 rotation, int mirror, |
| u8 global_alpha) |
| { |
| const int maxdownscale = cpu_is_omap34xx() ? 4 : 2; |
| bool five_taps = 0; |
| bool fieldmode = 0; |
| int cconv = 0; |
| unsigned offset0, offset1; |
| s32 row_inc; |
| s32 pix_inc; |
| u16 frame_height = height; |
| unsigned int field_offset = 0; |
| |
| if (paddr == 0) |
| return -EINVAL; |
| |
| if (ilace && height == out_height) |
| fieldmode = 1; |
| |
| if (ilace) { |
| if (fieldmode) |
| height /= 2; |
| pos_y /= 2; |
| out_height /= 2; |
| |
| DSSDBG("adjusting for ilace: height %d, pos_y %d, " |
| "out_height %d\n", |
| height, pos_y, out_height); |
| } |
| |
| if (plane == OMAP_DSS_GFX) { |
| if (width != out_width || height != out_height) |
| return -EINVAL; |
| |
| switch (color_mode) { |
| case OMAP_DSS_COLOR_ARGB16: |
| case OMAP_DSS_COLOR_ARGB32: |
| case OMAP_DSS_COLOR_RGBA32: |
| case OMAP_DSS_COLOR_RGBX32: |
| if (cpu_is_omap24xx()) |
| return -EINVAL; |
| /* fall through */ |
| case OMAP_DSS_COLOR_RGB12U: |
| case OMAP_DSS_COLOR_RGB16: |
| case OMAP_DSS_COLOR_RGB24P: |
| case OMAP_DSS_COLOR_RGB24U: |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| } else { |
| /* video plane */ |
| |
| unsigned long fclk = 0; |
| |
| if (out_width < width / maxdownscale || |
| out_width > width * 8) |
| return -EINVAL; |
| |
| if (out_height < height / maxdownscale || |
| out_height > height * 8) |
| return -EINVAL; |
| |
| switch (color_mode) { |
| case OMAP_DSS_COLOR_RGBX32: |
| case OMAP_DSS_COLOR_RGB12U: |
| if (cpu_is_omap24xx()) |
| return -EINVAL; |
| /* fall through */ |
| case OMAP_DSS_COLOR_RGB16: |
| case OMAP_DSS_COLOR_RGB24P: |
| case OMAP_DSS_COLOR_RGB24U: |
| break; |
| |
| case OMAP_DSS_COLOR_ARGB16: |
| case OMAP_DSS_COLOR_ARGB32: |
| case OMAP_DSS_COLOR_RGBA32: |
| if (cpu_is_omap24xx()) |
| return -EINVAL; |
| if (plane == OMAP_DSS_VIDEO1) |
| return -EINVAL; |
| break; |
| |
| case OMAP_DSS_COLOR_YUV2: |
| case OMAP_DSS_COLOR_UYVY: |
| cconv = 1; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| /* Must use 5-tap filter? */ |
| five_taps = height > out_height * 2; |
| |
| if (!five_taps) { |
| fclk = calc_fclk(width, height, |
| out_width, out_height); |
| |
| /* Try 5-tap filter if 3-tap fclk is too high */ |
| if (cpu_is_omap34xx() && height > out_height && |
| fclk > dispc_fclk_rate()) |
| five_taps = true; |
| } |
| |
| if (width > (2048 >> five_taps)) { |
| DSSERR("failed to set up scaling, fclk too low\n"); |
| return -EINVAL; |
| } |
| |
| if (five_taps) |
| fclk = calc_fclk_five_taps(width, height, |
| out_width, out_height, color_mode); |
| |
| DSSDBG("required fclk rate = %lu Hz\n", fclk); |
| DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate()); |
| |
| if (fclk > dispc_fclk_rate()) { |
| DSSERR("failed to set up scaling, " |
| "required fclk rate = %lu Hz, " |
| "current fclk rate = %lu Hz\n", |
| fclk, dispc_fclk_rate()); |
| return -EINVAL; |
| } |
| } |
| |
| if (ilace && !fieldmode) { |
| /* |
| * when downscaling the bottom field may have to start several |
| * source lines below the top field. Unfortunately ACCUI |
| * registers will only hold the fractional part of the offset |
| * so the integer part must be added to the base address of the |
| * bottom field. |
| */ |
| if (!height || height == out_height) |
| field_offset = 0; |
| else |
| field_offset = height / out_height / 2; |
| } |
| |
| /* Fields are independent but interleaved in memory. */ |
| if (fieldmode) |
| field_offset = 1; |
| |
| if (rotation_type == OMAP_DSS_ROT_DMA) |
| calc_dma_rotation_offset(rotation, mirror, |
| screen_width, width, frame_height, color_mode, |
| fieldmode, field_offset, |
| &offset0, &offset1, &row_inc, &pix_inc); |
| else |
| calc_vrfb_rotation_offset(rotation, mirror, |
| screen_width, width, frame_height, color_mode, |
| fieldmode, field_offset, |
| &offset0, &offset1, &row_inc, &pix_inc); |
| |
| DSSDBG("offset0 %u, offset1 %u, row_inc %d, pix_inc %d\n", |
| offset0, offset1, row_inc, pix_inc); |
| |
| _dispc_set_color_mode(plane, color_mode); |
| |
| _dispc_set_plane_ba0(plane, paddr + offset0); |
| _dispc_set_plane_ba1(plane, paddr + offset1); |
| |
| _dispc_set_row_inc(plane, row_inc); |
| _dispc_set_pix_inc(plane, pix_inc); |
| |
| DSSDBG("%d,%d %dx%d -> %dx%d\n", pos_x, pos_y, width, height, |
| out_width, out_height); |
| |
| _dispc_set_plane_pos(plane, pos_x, pos_y); |
| |
| _dispc_set_pic_size(plane, width, height); |
| |
| if (plane != OMAP_DSS_GFX) { |
| _dispc_set_scaling(plane, width, height, |
| out_width, out_height, |
| ilace, five_taps, fieldmode); |
| _dispc_set_vid_size(plane, out_width, out_height); |
| _dispc_set_vid_color_conv(plane, cconv); |
| } |
| |
| _dispc_set_rotation_attrs(plane, rotation, mirror, color_mode); |
| |
| if (plane != OMAP_DSS_VIDEO1) |
| _dispc_setup_global_alpha(plane, global_alpha); |
| |
| return 0; |
| } |
| |
| static void _dispc_enable_plane(enum omap_plane plane, bool enable) |
| { |
| REG_FLD_MOD(dispc_reg_att[plane], enable ? 1 : 0, 0, 0); |
| } |
| |
| static void dispc_disable_isr(void *data, u32 mask) |
| { |
| struct completion *compl = data; |
| complete(compl); |
| } |
| |
| static void _enable_lcd_out(bool enable) |
| { |
| REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 0, 0); |
| } |
| |
| void dispc_enable_lcd_out(bool enable) |
| { |
| struct completion frame_done_completion; |
| bool is_on; |
| int r; |
| |
| enable_clocks(1); |
| |
| /* When we disable LCD output, we need to wait until frame is done. |
| * Otherwise the DSS is still working, and turning off the clocks |
| * prevents DSS from going to OFF mode */ |
| is_on = REG_GET(DISPC_CONTROL, 0, 0); |
| |
| if (!enable && is_on) { |
| init_completion(&frame_done_completion); |
| |
| r = omap_dispc_register_isr(dispc_disable_isr, |
| &frame_done_completion, |
| DISPC_IRQ_FRAMEDONE); |
| |
| if (r) |
| DSSERR("failed to register FRAMEDONE isr\n"); |
| } |
| |
| _enable_lcd_out(enable); |
| |
| if (!enable && is_on) { |
| if (!wait_for_completion_timeout(&frame_done_completion, |
| msecs_to_jiffies(100))) |
| DSSERR("timeout waiting for FRAME DONE\n"); |
| |
| r = omap_dispc_unregister_isr(dispc_disable_isr, |
| &frame_done_completion, |
| DISPC_IRQ_FRAMEDONE); |
| |
| if (r) |
| DSSERR("failed to unregister FRAMEDONE isr\n"); |
| } |
| |
| enable_clocks(0); |
| } |
| |
| static void _enable_digit_out(bool enable) |
| { |
| REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 1, 1); |
| } |
| |
| void dispc_enable_digit_out(bool enable) |
| { |
| struct completion frame_done_completion; |
| int r; |
| |
| enable_clocks(1); |
| |
| if (REG_GET(DISPC_CONTROL, 1, 1) == enable) { |
| enable_clocks(0); |
| return; |
| } |
| |
| if (enable) { |
| unsigned long flags; |
| /* When we enable digit output, we'll get an extra digit |
| * sync lost interrupt, that we need to ignore */ |
| spin_lock_irqsave(&dispc.irq_lock, flags); |
| dispc.irq_error_mask &= ~DISPC_IRQ_SYNC_LOST_DIGIT; |
| _omap_dispc_set_irqs(); |
| spin_unlock_irqrestore(&dispc.irq_lock, flags); |
| } |
| |
| /* When we disable digit output, we need to wait until fields are done. |
| * Otherwise the DSS is still working, and turning off the clocks |
| * prevents DSS from going to OFF mode. And when enabling, we need to |
| * wait for the extra sync losts */ |
| init_completion(&frame_done_completion); |
| |
| r = omap_dispc_register_isr(dispc_disable_isr, &frame_done_completion, |
| DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD); |
| if (r) |
| DSSERR("failed to register EVSYNC isr\n"); |
| |
| _enable_digit_out(enable); |
| |
| /* XXX I understand from TRM that we should only wait for the |
| * current field to complete. But it seems we have to wait |
| * for both fields */ |
| if (!wait_for_completion_timeout(&frame_done_completion, |
| msecs_to_jiffies(100))) |
| DSSERR("timeout waiting for EVSYNC\n"); |
| |
| if (!wait_for_completion_timeout(&frame_done_completion, |
| msecs_to_jiffies(100))) |
| DSSERR("timeout waiting for EVSYNC\n"); |
| |
| r = omap_dispc_unregister_isr(dispc_disable_isr, |
| &frame_done_completion, |
| DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD); |
| if (r) |
| DSSERR("failed to unregister EVSYNC isr\n"); |
| |
| if (enable) { |
| unsigned long flags; |
| spin_lock_irqsave(&dispc.irq_lock, flags); |
| dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR; |
| dispc_write_reg(DISPC_IRQSTATUS, DISPC_IRQ_SYNC_LOST_DIGIT); |
| _omap_dispc_set_irqs(); |
| spin_unlock_irqrestore(&dispc.irq_lock, flags); |
| } |
| |
| enable_clocks(0); |
| } |
| |
| void dispc_lcd_enable_signal_polarity(bool act_high) |
| { |
| enable_clocks(1); |
| REG_FLD_MOD(DISPC_CONTROL, act_high ? 1 : 0, 29, 29); |
| enable_clocks(0); |
| } |
| |
| void dispc_lcd_enable_signal(bool enable) |
| { |
| enable_clocks(1); |
| REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 28, 28); |
| enable_clocks(0); |
| } |
| |
| void dispc_pck_free_enable(bool enable) |
| { |
| enable_clocks(1); |
| REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 27, 27); |
| enable_clocks(0); |
| } |
| |
| void dispc_enable_fifohandcheck(bool enable) |
| { |
| enable_clocks(1); |
| REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 16, 16); |
| enable_clocks(0); |
| } |
| |
| |
| void dispc_set_lcd_display_type(enum omap_lcd_display_type type) |
| { |
| int mode; |
| |
| switch (type) { |
| case OMAP_DSS_LCD_DISPLAY_STN: |
| mode = 0; |
| break; |
| |
| case OMAP_DSS_LCD_DISPLAY_TFT: |
| mode = 1; |
| break; |
| |
| default: |
| BUG(); |
| return; |
| } |
| |
| enable_clocks(1); |
| REG_FLD_MOD(DISPC_CONTROL, mode, 3, 3); |
| enable_clocks(0); |
| } |
| |
| void dispc_set_loadmode(enum omap_dss_load_mode mode) |
| { |
| enable_clocks(1); |
| REG_FLD_MOD(DISPC_CONFIG, mode, 2, 1); |
| enable_clocks(0); |
| } |
| |
| |
| void dispc_set_default_color(enum omap_channel channel, u32 color) |
| { |
| const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0, |
| DISPC_DEFAULT_COLOR1 }; |
| |
| enable_clocks(1); |
| dispc_write_reg(def_reg[channel], color); |
| enable_clocks(0); |
| } |
| |
| u32 dispc_get_default_color(enum omap_channel channel) |
| { |
| const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0, |
| DISPC_DEFAULT_COLOR1 }; |
| u32 l; |
| |
| BUG_ON(channel != OMAP_DSS_CHANNEL_DIGIT && |
| channel != OMAP_DSS_CHANNEL_LCD); |
| |
| enable_clocks(1); |
| l = dispc_read_reg(def_reg[channel]); |
| enable_clocks(0); |
| |
| return l; |
| } |
| |
| void dispc_set_trans_key(enum omap_channel ch, |
| enum omap_dss_trans_key_type type, |
| u32 trans_key) |
| { |
| const struct dispc_reg tr_reg[] = { |
| DISPC_TRANS_COLOR0, DISPC_TRANS_COLOR1 }; |
| |
| enable_clocks(1); |
| if (ch == OMAP_DSS_CHANNEL_LCD) |
| REG_FLD_MOD(DISPC_CONFIG, type, 11, 11); |
| else /* OMAP_DSS_CHANNEL_DIGIT */ |
| REG_FLD_MOD(DISPC_CONFIG, type, 13, 13); |
| |
| dispc_write_reg(tr_reg[ch], trans_key); |
| enable_clocks(0); |
| } |
| |
| void dispc_get_trans_key(enum omap_channel ch, |
| enum omap_dss_trans_key_type *type, |
| u32 *trans_key) |
| { |
| const struct dispc_reg tr_reg[] = { |
| DISPC_TRANS_COLOR0, DISPC_TRANS_COLOR1 }; |
| |
| enable_clocks(1); |
| if (type) { |
| if (ch == OMAP_DSS_CHANNEL_LCD) |
| *type = REG_GET(DISPC_CONFIG, 11, 11); |
| else if (ch == OMAP_DSS_CHANNEL_DIGIT) |
| *type = REG_GET(DISPC_CONFIG, 13, 13); |
| else |
| BUG(); |
| } |
| |
| if (trans_key) |
| *trans_key = dispc_read_reg(tr_reg[ch]); |
| enable_clocks(0); |
| } |
| |
| void dispc_enable_trans_key(enum omap_channel ch, bool enable) |
| { |
| enable_clocks(1); |
| if (ch == OMAP_DSS_CHANNEL_LCD) |
| REG_FLD_MOD(DISPC_CONFIG, enable, 10, 10); |
| else /* OMAP_DSS_CHANNEL_DIGIT */ |
| REG_FLD_MOD(DISPC_CONFIG, enable, 12, 12); |
| enable_clocks(0); |
| } |
| void dispc_enable_alpha_blending(enum omap_channel ch, bool enable) |
| { |
| if (cpu_is_omap24xx()) |
| return; |
| |
| enable_clocks(1); |
| if (ch == OMAP_DSS_CHANNEL_LCD) |
| REG_FLD_MOD(DISPC_CONFIG, enable, 18, 18); |
| else /* OMAP_DSS_CHANNEL_DIGIT */ |
| REG_FLD_MOD(DISPC_CONFIG, enable, 19, 19); |
| enable_clocks(0); |
| } |
| bool dispc_alpha_blending_enabled(enum omap_channel ch) |
| { |
| bool enabled; |
| |
| if (cpu_is_omap24xx()) |
| return false; |
| |
| enable_clocks(1); |
| if (ch == OMAP_DSS_CHANNEL_LCD) |
| enabled = REG_GET(DISPC_CONFIG, 18, 18); |
| else if (ch == OMAP_DSS_CHANNEL_DIGIT) |
| enabled = REG_GET(DISPC_CONFIG, 18, 18); |
| else |
| BUG(); |
| enable_clocks(0); |
| |
| return enabled; |
| |
| } |
| |
| |
| bool dispc_trans_key_enabled(enum omap_channel ch) |
| { |
| bool enabled; |
| |
| enable_clocks(1); |
| if (ch == OMAP_DSS_CHANNEL_LCD) |
| enabled = REG_GET(DISPC_CONFIG, 10, 10); |
| else if (ch == OMAP_DSS_CHANNEL_DIGIT) |
| enabled = REG_GET(DISPC_CONFIG, 12, 12); |
| else |
| BUG(); |
| enable_clocks(0); |
| |
| return enabled; |
| } |
| |
| |
| void dispc_set_tft_data_lines(u8 data_lines) |
| { |
| int code; |
| |
| switch (data_lines) { |
| case 12: |
| code = 0; |
| break; |
| case 16: |
| code = 1; |
| break; |
| case 18: |
| code = 2; |
| break; |
| case 24: |
| code = 3; |
| break; |
| default: |
| BUG(); |
| return; |
| } |
| |
| enable_clocks(1); |
| REG_FLD_MOD(DISPC_CONTROL, code, 9, 8); |
| enable_clocks(0); |
| } |
| |
| void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode) |
| { |
| u32 l; |
| int stallmode; |
| int gpout0 = 1; |
| int gpout1; |
| |
| switch (mode) { |
| case OMAP_DSS_PARALLELMODE_BYPASS: |
| stallmode = 0; |
| gpout1 = 1; |
| break; |
| |
| case OMAP_DSS_PARALLELMODE_RFBI: |
| stallmode = 1; |
| gpout1 = 0; |
| break; |
| |
| case OMAP_DSS_PARALLELMODE_DSI: |
| stallmode = 1; |
| gpout1 = 1; |
| break; |
| |
| default: |
| BUG(); |
| return; |
| } |
| |
| enable_clocks(1); |
| |
| l = dispc_read_reg(DISPC_CONTROL); |
| |
| l = FLD_MOD(l, stallmode, 11, 11); |
| l = FLD_MOD(l, gpout0, 15, 15); |
| l = FLD_MOD(l, gpout1, 16, 16); |
| |
| dispc_write_reg(DISPC_CONTROL, l); |
| |
| enable_clocks(0); |
| } |
| |
| static bool _dispc_lcd_timings_ok(int hsw, int hfp, int hbp, |
| int vsw, int vfp, int vbp) |
| { |
| if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) { |
| if (hsw < 1 || hsw > 64 || |
| hfp < 1 || hfp > 256 || |
| hbp < 1 || hbp > 256 || |
| vsw < 1 || vsw > 64 || |
| vfp < 0 || vfp > 255 || |
| vbp < 0 || vbp > 255) |
| return false; |
| } else { |
| if (hsw < 1 || hsw > 256 || |
| hfp < 1 || hfp > 4096 || |
| hbp < 1 || hbp > 4096 || |
| vsw < 1 || vsw > 256 || |
| vfp < 0 || vfp > 4095 || |
| vbp < 0 || vbp > 4095) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool dispc_lcd_timings_ok(struct omap_video_timings *timings) |
| { |
| return _dispc_lcd_timings_ok(timings->hsw, timings->hfp, |
| timings->hbp, timings->vsw, |
| timings->vfp, timings->vbp); |
| } |
| |
| static void _dispc_set_lcd_timings(int hsw, int hfp, int hbp, |
| int vsw, int vfp, int vbp) |
| { |
| u32 timing_h, timing_v; |
| |
| if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) { |
| timing_h = FLD_VAL(hsw-1, 5, 0) | FLD_VAL(hfp-1, 15, 8) | |
| FLD_VAL(hbp-1, 27, 20); |
| |
| timing_v = FLD_VAL(vsw-1, 5, 0) | FLD_VAL(vfp, 15, 8) | |
| FLD_VAL(vbp, 27, 20); |
| } else { |
| timing_h = FLD_VAL(hsw-1, 7, 0) | FLD_VAL(hfp-1, 19, 8) | |
| FLD_VAL(hbp-1, 31, 20); |
| |
| timing_v = FLD_VAL(vsw-1, 7, 0) | FLD_VAL(vfp, 19, 8) | |
| FLD_VAL(vbp, 31, 20); |
| } |
| |
| enable_clocks(1); |
| dispc_write_reg(DISPC_TIMING_H, timing_h); |
| dispc_write_reg(DISPC_TIMING_V, timing_v); |
| enable_clocks(0); |
| } |
| |
| /* change name to mode? */ |
| void dispc_set_lcd_timings(struct omap_video_timings *timings) |
| { |
| unsigned xtot, ytot; |
| unsigned long ht, vt; |
| |
| if (!_dispc_lcd_timings_ok(timings->hsw, timings->hfp, |
| timings->hbp, timings->vsw, |
| timings->vfp, timings->vbp)) |
| BUG(); |
| |
| _dispc_set_lcd_timings(timings->hsw, timings->hfp, timings->hbp, |
| timings->vsw, timings->vfp, timings->vbp); |
| |
| dispc_set_lcd_size(timings->x_res, timings->y_res); |
| |
| xtot = timings->x_res + timings->hfp + timings->hsw + timings->hbp; |
| ytot = timings->y_res + timings->vfp + timings->vsw + timings->vbp; |
| |
| ht = (timings->pixel_clock * 1000) / xtot; |
| vt = (timings->pixel_clock * 1000) / xtot / ytot; |
| |
| DSSDBG("xres %u yres %u\n", timings->x_res, timings->y_res); |
| DSSDBG("pck %u\n", timings->pixel_clock); |
| DSSDBG("hsw %d hfp %d hbp %d vsw %d vfp %d vbp %d\n", |
| timings->hsw, timings->hfp, timings->hbp, |
| timings->vsw, timings->vfp, timings->vbp); |
| |
| DSSDBG("hsync %luHz, vsync %luHz\n", ht, vt); |
| } |
| |
| static void dispc_set_lcd_divisor(u16 lck_div, u16 pck_div) |
| { |
| BUG_ON(lck_div < 1); |
| BUG_ON(pck_div < 2); |
| |
| enable_clocks(1); |
| dispc_write_reg(DISPC_DIVISOR, |
| FLD_VAL(lck_div, 23, 16) | FLD_VAL(pck_div, 7, 0)); |
| enable_clocks(0); |
| } |
| |
| static void dispc_get_lcd_divisor(int *lck_div, int *pck_div) |
| { |
| u32 l; |
| l = dispc_read_reg(DISPC_DIVISOR); |
| *lck_div = FLD_GET(l, 23, 16); |
| *pck_div = FLD_GET(l, 7, 0); |
| } |
| |
| unsigned long dispc_fclk_rate(void) |
| { |
| unsigned long r = 0; |
| |
| if (dss_get_dispc_clk_source() == 0) |
| r = dss_clk_get_rate(DSS_CLK_FCK1); |
| else |
| #ifdef CONFIG_OMAP2_DSS_DSI |
| r = dsi_get_dsi1_pll_rate(); |
| #else |
| BUG(); |
| #endif |
| return r; |
| } |
| |
| unsigned long dispc_lclk_rate(void) |
| { |
| int lcd; |
| unsigned long r; |
| u32 l; |
| |
| l = dispc_read_reg(DISPC_DIVISOR); |
| |
| lcd = FLD_GET(l, 23, 16); |
| |
| r = dispc_fclk_rate(); |
| |
| return r / lcd; |
| } |
| |
| unsigned long dispc_pclk_rate(void) |
| { |
| int lcd, pcd; |
| unsigned long r; |
| u32 l; |
| |
| l = dispc_read_reg(DISPC_DIVISOR); |
| |
| lcd = FLD_GET(l, 23, 16); |
| pcd = FLD_GET(l, 7, 0); |
| |
| r = dispc_fclk_rate(); |
| |
| return r / lcd / pcd; |
| } |
| |
| void dispc_dump_clocks(struct seq_file *s) |
| { |
| int lcd, pcd; |
| |
| enable_clocks(1); |
| |
| dispc_get_lcd_divisor(&lcd, &pcd); |
| |
| seq_printf(s, "- DISPC -\n"); |
| |
| seq_printf(s, "dispc fclk source = %s\n", |
| dss_get_dispc_clk_source() == 0 ? |
| "dss1_alwon_fclk" : "dsi1_pll_fclk"); |
| |
| seq_printf(s, "fck\t\t%-16lu\n", dispc_fclk_rate()); |
| seq_printf(s, "lck\t\t%-16lulck div\t%u\n", dispc_lclk_rate(), lcd); |
| seq_printf(s, "pck\t\t%-16lupck div\t%u\n", dispc_pclk_rate(), pcd); |
| |
| enable_clocks(0); |
| } |
| |
| void dispc_dump_regs(struct seq_file *s) |
| { |
| #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dispc_read_reg(r)) |
| |
| dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); |
| |
| DUMPREG(DISPC_REVISION); |
| DUMPREG(DISPC_SYSCONFIG); |
| DUMPREG(DISPC_SYSSTATUS); |
| DUMPREG(DISPC_IRQSTATUS); |
| DUMPREG(DISPC_IRQENABLE); |
| DUMPREG(DISPC_CONTROL); |
| DUMPREG(DISPC_CONFIG); |
| DUMPREG(DISPC_CAPABLE); |
| DUMPREG(DISPC_DEFAULT_COLOR0); |
| DUMPREG(DISPC_DEFAULT_COLOR1); |
| DUMPREG(DISPC_TRANS_COLOR0); |
| DUMPREG(DISPC_TRANS_COLOR1); |
| DUMPREG(DISPC_LINE_STATUS); |
| DUMPREG(DISPC_LINE_NUMBER); |
| DUMPREG(DISPC_TIMING_H); |
| DUMPREG(DISPC_TIMING_V); |
| DUMPREG(DISPC_POL_FREQ); |
| DUMPREG(DISPC_DIVISOR); |
| DUMPREG(DISPC_GLOBAL_ALPHA); |
| DUMPREG(DISPC_SIZE_DIG); |
| DUMPREG(DISPC_SIZE_LCD); |
| |
| DUMPREG(DISPC_GFX_BA0); |
| DUMPREG(DISPC_GFX_BA1); |
| DUMPREG(DISPC_GFX_POSITION); |
| DUMPREG(DISPC_GFX_SIZE); |
| DUMPREG(DISPC_GFX_ATTRIBUTES); |
| DUMPREG(DISPC_GFX_FIFO_THRESHOLD); |
| DUMPREG(DISPC_GFX_FIFO_SIZE_STATUS); |
| DUMPREG(DISPC_GFX_ROW_INC); |
| DUMPREG(DISPC_GFX_PIXEL_INC); |
| DUMPREG(DISPC_GFX_WINDOW_SKIP); |
| DUMPREG(DISPC_GFX_TABLE_BA); |
| |
| DUMPREG(DISPC_DATA_CYCLE1); |
| DUMPREG(DISPC_DATA_CYCLE2); |
| DUMPREG(DISPC_DATA_CYCLE3); |
| |
| DUMPREG(DISPC_CPR_COEF_R); |
| DUMPREG(DISPC_CPR_COEF_G); |
| DUMPREG(DISPC_CPR_COEF_B); |
| |
| DUMPREG(DISPC_GFX_PRELOAD); |
| |
| DUMPREG(DISPC_VID_BA0(0)); |
| DUMPREG(DISPC_VID_BA1(0)); |
| DUMPREG(DISPC_VID_POSITION(0)); |
| DUMPREG(DISPC_VID_SIZE(0)); |
| DUMPREG(DISPC_VID_ATTRIBUTES(0)); |
| DUMPREG(DISPC_VID_FIFO_THRESHOLD(0)); |
| DUMPREG(DISPC_VID_FIFO_SIZE_STATUS(0)); |
| DUMPREG(DISPC_VID_ROW_INC(0)); |
| DUMPREG(DISPC_VID_PIXEL_INC(0)); |
| DUMPREG(DISPC_VID_FIR(0)); |
| DUMPREG(DISPC_VID_PICTURE_SIZE(0)); |
| DUMPREG(DISPC_VID_ACCU0(0)); |
| DUMPREG(DISPC_VID_ACCU1(0)); |
| |
| DUMPREG(DISPC_VID_BA0(1)); |
| DUMPREG(DISPC_VID_BA1(1)); |
| DUMPREG(DISPC_VID_POSITION(1)); |
| DUMPREG(DISPC_VID_SIZE(1)); |
| DUMPREG(DISPC_VID_ATTRIBUTES(1)); |
| DUMPREG(DISPC_VID_FIFO_THRESHOLD(1)); |
| DUMPREG(DISPC_VID_FIFO_SIZE_STATUS(1)); |
| DUMPREG(DISPC_VID_ROW_INC(1)); |
| DUMPREG(DISPC_VID_PIXEL_INC(1)); |
| DUMPREG(DISPC_VID_FIR(1)); |
| DUMPREG(DISPC_VID_PICTURE_SIZE(1)); |
| DUMPREG(DISPC_VID_ACCU0(1)); |
| DUMPREG(DISPC_VID_ACCU1(1)); |
| |
| DUMPREG(DISPC_VID_FIR_COEF_H(0, 0)); |
| DUMPREG(DISPC_VID_FIR_COEF_H(0, 1)); |
| DUMPREG(DISPC_VID_FIR_COEF_H(0, 2)); |
| DUMPREG(DISPC_VID_FIR_COEF_H(0, 3)); |
| DUMPREG(DISPC_VID_FIR_COEF_H(0, 4)); |
| DUMPREG(DISPC_VID_FIR_COEF_H(0, 5)); |
| DUMPREG(DISPC_VID_FIR_COEF_H(0, 6)); |
| DUMPREG(DISPC_VID_FIR_COEF_H(0, 7)); |
| DUMPREG(DISPC_VID_FIR_COEF_HV(0, 0)); |
| DUMPREG(DISPC_VID_FIR_COEF_HV(0, 1)); |
| DUMPREG(DISPC_VID_FIR_COEF_HV(0, 2)); |
| DUMPREG(DISPC_VID_FIR_COEF_HV(0, 3)); |
| DUMPREG(DISPC_VID_FIR_COEF_HV(0, 4)); |
| DUMPREG(DISPC_VID_FIR_COEF_HV(0, 5)); |
| DUMPREG(DISPC_VID_FIR_COEF_HV(0, 6)); |
| DUMPREG(DISPC_VID_FIR_COEF_HV(0, 7)); |
| DUMPREG(DISPC_VID_CONV_COEF(0, 0)); |
| DUMPREG(DISPC_VID_CONV_COEF(0, 1)); |
| DUMPREG(DISPC_VID_CONV_COEF(0, 2)); |
| DUMPREG(DISPC_VID_CONV_COEF(0, 3)); |
| DUMPREG(DISPC_VID_CONV_COEF(0, 4)); |
| DUMPREG(DISPC_VID_FIR_COEF_V(0, 0)); |
| DUMPREG(DISPC_VID_FIR_COEF_V(0, 1)); |
| DUMPREG(DISPC_VID_FIR_COEF_V(0, 2)); |
| DUMPREG(DISPC_VID_FIR_COEF_V(0, 3)); |
| DUMPREG(DISPC_VID_FIR_COEF_V(0, 4)); |
| DUMPREG(DISPC_VID_FIR_COEF_V(0, 5)); |
| DUMPREG(DISPC_VID_FIR_COEF_V(0, 6)); |
| DUMPREG(DISPC_VID_FIR_COEF_V(0, 7)); |
| |
| DUMPREG(DISPC_VID_FIR_COEF_H(1, 0)); |
| DUMPREG(DISPC_VID_FIR_COEF_H(1, 1)); |
| DUMPREG(DISPC_VID_FIR_COEF_H(1, 2)); |
| DUMPREG(DISPC_VID_FIR_COEF_H(1, 3)); |
| DUMPREG(DISPC_VID_FIR_COEF_H(1, 4)); |
| DUMPREG(DISPC_VID_FIR_COEF_H(1, 5)); |
| DUMPREG(DISPC_VID_FIR_COEF_H(1, 6)); |
| DUMPREG(DISPC_VID_FIR_COEF_H(1, 7)); |
| DUMPREG(DISPC_VID_FIR_COEF_HV(1, 0)); |
| DUMPREG(DISPC_VID_FIR_COEF_HV(1, 1)); |
| DUMPREG(DISPC_VID_FIR_COEF_HV(1, 2)); |
| DUMPREG(DISPC_VID_FIR_COEF_HV(1, 3)); |
| DUMPREG(DISPC_VID_FIR_COEF_HV(1, 4)); |
| DUMPREG(DISPC_VID_FIR_COEF_HV(1, 5)); |
| DUMPREG(DISPC_VID_FIR_COEF_HV(1, 6)); |
| DUMPREG(DISPC_VID_FIR_COEF_HV(1, 7)); |
| DUMPREG(DISPC_VID_CONV_COEF(1, 0)); |
| DUMPREG(DISPC_VID_CONV_COEF(1, 1)); |
| DUMPREG(DISPC_VID_CONV_COEF(1, 2)); |
| DUMPREG(DISPC_VID_CONV_COEF(1, 3)); |
| DUMPREG(DISPC_VID_CONV_COEF(1, 4)); |
| DUMPREG(DISPC_VID_FIR_COEF_V(1, 0)); |
| DUMPREG(DISPC_VID_FIR_COEF_V(1, 1)); |
| DUMPREG(DISPC_VID_FIR_COEF_V(1, 2)); |
| DUMPREG(DISPC_VID_FIR_COEF_V(1, 3)); |
| DUMPREG(DISPC_VID_FIR_COEF_V(1, 4)); |
| DUMPREG(DISPC_VID_FIR_COEF_V(1, 5)); |
| DUMPREG(DISPC_VID_FIR_COEF_V(1, 6)); |
| DUMPREG(DISPC_VID_FIR_COEF_V(1, 7)); |
| |
| DUMPREG(DISPC_VID_PRELOAD(0)); |
| DUMPREG(DISPC_VID_PRELOAD(1)); |
| |
| dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); |
| #undef DUMPREG |
| } |
| |
| static void _dispc_set_pol_freq(bool onoff, bool rf, bool ieo, bool ipc, |
| bool ihs, bool ivs, u8 acbi, u8 acb) |
| { |
| u32 l = 0; |
| |
| DSSDBG("onoff %d rf %d ieo %d ipc %d ihs %d ivs %d acbi %d acb %d\n", |
| onoff, rf, ieo, ipc, ihs, ivs, acbi, acb); |
| |
| l |= FLD_VAL(onoff, 17, 17); |
| l |= FLD_VAL(rf, 16, 16); |
| l |= FLD_VAL(ieo, 15, 15); |
| l |= FLD_VAL(ipc, 14, 14); |
| l |= FLD_VAL(ihs, 13, 13); |
| l |= FLD_VAL(ivs, 12, 12); |
| l |= FLD_VAL(acbi, 11, 8); |
| l |= FLD_VAL(acb, 7, 0); |
| |
| enable_clocks(1); |
| dispc_write_reg(DISPC_POL_FREQ, l); |
| enable_clocks(0); |
| } |
| |
| void dispc_set_pol_freq(enum omap_panel_config config, u8 acbi, u8 acb) |
| { |
| _dispc_set_pol_freq((config & OMAP_DSS_LCD_ONOFF) != 0, |
| (config & OMAP_DSS_LCD_RF) != 0, |
| (config & OMAP_DSS_LCD_IEO) != 0, |
| (config & OMAP_DSS_LCD_IPC) != 0, |
| (config & OMAP_DSS_LCD_IHS) != 0, |
| (config & OMAP_DSS_LCD_IVS) != 0, |
| acbi, acb); |
| } |
| |
| /* with fck as input clock rate, find dispc dividers that produce req_pck */ |
| void dispc_find_clk_divs(bool is_tft, unsigned long req_pck, unsigned long fck, |
| struct dispc_clock_info *cinfo) |
| { |
| u16 pcd_min = is_tft ? 2 : 3; |
| unsigned long best_pck; |
| u16 best_ld, cur_ld; |
| u16 best_pd, cur_pd; |
| |
| best_pck = 0; |
| best_ld = 0; |
| best_pd = 0; |
| |
| for (cur_ld = 1; cur_ld <= 255; ++cur_ld) { |
| unsigned long lck = fck / cur_ld; |
| |
| for (cur_pd = pcd_min; cur_pd <= 255; ++cur_pd) { |
| unsigned long pck = lck / cur_pd; |
| long old_delta = abs(best_pck - req_pck); |
| long new_delta = abs(pck - req_pck); |
| |
| if (best_pck == 0 || new_delta < old_delta) { |
| best_pck = pck; |
| best_ld = cur_ld; |
| best_pd = cur_pd; |
| |
| if (pck == req_pck) |
| goto found; |
| } |
| |
| if (pck < req_pck) |
| break; |
| } |
| |
| if (lck / pcd_min < req_pck) |
| break; |
| } |
| |
| found: |
| cinfo->lck_div = best_ld; |
| cinfo->pck_div = best_pd; |
| cinfo->lck = fck / cinfo->lck_div; |
| cinfo->pck = cinfo->lck / cinfo->pck_div; |
| } |
| |
| /* calculate clock rates using dividers in cinfo */ |
| int dispc_calc_clock_rates(unsigned long dispc_fclk_rate, |
| struct dispc_clock_info *cinfo) |
| { |
| if (cinfo->lck_div > 255 || cinfo->lck_div == 0) |
| return -EINVAL; |
| if (cinfo->pck_div < 2 || cinfo->pck_div > 255) |
| return -EINVAL; |
| |
| cinfo->lck = dispc_fclk_rate / cinfo->lck_div; |
| cinfo->pck = cinfo->lck / cinfo->pck_div; |
| |
| return 0; |
| } |
| |
| int dispc_set_clock_div(struct dispc_clock_info *cinfo) |
| { |
| DSSDBG("lck = %lu (%u)\n", cinfo->lck, cinfo->lck_div); |
| DSSDBG("pck = %lu (%u)\n", cinfo->pck, cinfo->pck_div); |
| |
| dispc_set_lcd_divisor(cinfo->lck_div, cinfo->pck_div); |
| |
| return 0; |
| } |
| |
| int dispc_get_clock_div(struct dispc_clock_info *cinfo) |
| { |
| unsigned long fck; |
| |
| fck = dispc_fclk_rate(); |
| |
| cinfo->lck_div = REG_GET(DISPC_DIVISOR, 23, 16); |
| cinfo->pck_div = REG_GET(DISPC_DIVISOR, 7, 0); |
| |
| cinfo->lck = fck / cinfo->lck_div; |
| cinfo->pck = cinfo->lck / cinfo->pck_div; |
| |
| return 0; |
| } |
| |
| /* dispc.irq_lock has to be locked by the caller */ |
| static void _omap_dispc_set_irqs(void) |
| { |
| u32 mask; |
| u32 old_mask; |
| int i; |
| struct omap_dispc_isr_data *isr_data; |
| |
| mask = dispc.irq_error_mask; |
| |
| for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { |
| isr_data = &dispc.registered_isr[i]; |
| |
| if (isr_data->isr == NULL) |
| continue; |
| |
| mask |= isr_data->mask; |
| } |
| |
| enable_clocks(1); |
| |
| old_mask = dispc_read_reg(DISPC_IRQENABLE); |
| /* clear the irqstatus for newly enabled irqs */ |
| dispc_write_reg(DISPC_IRQSTATUS, (mask ^ old_mask) & mask); |
| |
| dispc_write_reg(DISPC_IRQENABLE, mask); |
| |
| enable_clocks(0); |
| } |
| |
| int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask) |
| { |
| int i; |
| int ret; |
| unsigned long flags; |
| struct omap_dispc_isr_data *isr_data; |
| |
| if (isr == NULL) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&dispc.irq_lock, flags); |
| |
| /* check for duplicate entry */ |
| for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { |
| isr_data = &dispc.registered_isr[i]; |
| if (isr_data->isr == isr && isr_data->arg == arg && |
| isr_data->mask == mask) { |
| ret = -EINVAL; |
| goto err; |
| } |
| } |
| |
| isr_data = NULL; |
| ret = -EBUSY; |
| |
| for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { |
| isr_data = &dispc.registered_isr[i]; |
| |
| if (isr_data->isr != NULL) |
| continue; |
| |
| isr_data->isr = isr; |
| isr_data->arg = arg; |
| isr_data->mask = mask; |
| ret = 0; |
| |
| break; |
| } |
| |
| _omap_dispc_set_irqs(); |
| |
| spin_unlock_irqrestore(&dispc.irq_lock, flags); |
| |
| return 0; |
| err: |
| spin_unlock_irqrestore(&dispc.irq_lock, flags); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(omap_dispc_register_isr); |
| |
| int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask) |
| { |
| int i; |
| unsigned long flags; |
| int ret = -EINVAL; |
| struct omap_dispc_isr_data *isr_data; |
| |
| spin_lock_irqsave(&dispc.irq_lock, flags); |
| |
| for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { |
| isr_data = &dispc.registered_isr[i]; |
| if (isr_data->isr != isr || isr_data->arg != arg || |
| isr_data->mask != mask) |
| continue; |
| |
| /* found the correct isr */ |
| |
| isr_data->isr = NULL; |
| isr_data->arg = NULL; |
| isr_data->mask = 0; |
| |
| ret = 0; |
| break; |
| } |
| |
| if (ret == 0) |
| _omap_dispc_set_irqs(); |
| |
| spin_unlock_irqrestore(&dispc.irq_lock, flags); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(omap_dispc_unregister_isr); |
| |
| #ifdef DEBUG |
| static void print_irq_status(u32 status) |
| { |
| if ((status & dispc.irq_error_mask) == 0) |
| return; |
| |
| printk(KERN_DEBUG "DISPC IRQ: 0x%x: ", status); |
| |
| #define PIS(x) \ |
| if (status & DISPC_IRQ_##x) \ |
| printk(#x " "); |
| PIS(GFX_FIFO_UNDERFLOW); |
| PIS(OCP_ERR); |
| PIS(VID1_FIFO_UNDERFLOW); |
| PIS(VID2_FIFO_UNDERFLOW); |
| PIS(SYNC_LOST); |
| PIS(SYNC_LOST_DIGIT); |
| #undef PIS |
| |
| printk("\n"); |
| } |
| #endif |
| |
| /* Called from dss.c. Note that we don't touch clocks here, |
| * but we presume they are on because we got an IRQ. However, |
| * an irq handler may turn the clocks off, so we may not have |
| * clock later in the function. */ |
| void dispc_irq_handler(void) |
| { |
| int i; |
| u32 irqstatus; |
| u32 handledirqs = 0; |
| u32 unhandled_errors; |
| struct omap_dispc_isr_data *isr_data; |
| struct omap_dispc_isr_data registered_isr[DISPC_MAX_NR_ISRS]; |
| |
| spin_lock(&dispc.irq_lock); |
| |
| irqstatus = dispc_read_reg(DISPC_IRQSTATUS); |
| |
| #ifdef DEBUG |
| if (dss_debug) |
| print_irq_status(irqstatus); |
| #endif |
| /* Ack the interrupt. Do it here before clocks are possibly turned |
| * off */ |
| dispc_write_reg(DISPC_IRQSTATUS, irqstatus); |
| /* flush posted write */ |
| dispc_read_reg(DISPC_IRQSTATUS); |
| |
| /* make a copy and unlock, so that isrs can unregister |
| * themselves */ |
| memcpy(registered_isr, dispc.registered_isr, |
| sizeof(registered_isr)); |
| |
| spin_unlock(&dispc.irq_lock); |
| |
| for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { |
| isr_data = ®istered_isr[i]; |
| |
| if (!isr_data->isr) |
| continue; |
| |
| if (isr_data->mask & irqstatus) { |
| isr_data->isr(isr_data->arg, irqstatus); |
| handledirqs |= isr_data->mask; |
| } |
| } |
| |
| spin_lock(&dispc.irq_lock); |
| |
| unhandled_errors = irqstatus & ~handledirqs & dispc.irq_error_mask; |
| |
| if (unhandled_errors) { |
| dispc.error_irqs |= unhandled_errors; |
| |
| dispc.irq_error_mask &= ~unhandled_errors; |
| _omap_dispc_set_irqs(); |
| |
| schedule_work(&dispc.error_work); |
| } |
| |
| spin_unlock(&dispc.irq_lock); |
| } |
| |
| static void dispc_error_worker(struct work_struct *work) |
| { |
| int i; |
| u32 errors; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dispc.irq_lock, flags); |
| errors = dispc.error_irqs; |
| dispc.error_irqs = 0; |
| spin_unlock_irqrestore(&dispc.irq_lock, flags); |
| |
| if (errors & DISPC_IRQ_GFX_FIFO_UNDERFLOW) { |
| DSSERR("GFX_FIFO_UNDERFLOW, disabling GFX\n"); |
| for (i = 0; i < omap_dss_get_num_overlays(); ++i) { |
| struct omap_overlay *ovl; |
| ovl = omap_dss_get_overlay(i); |
| |
| if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) |
| continue; |
| |
| if (ovl->id == 0) { |
| dispc_enable_plane(ovl->id, 0); |
| dispc_go(ovl->manager->id); |
| mdelay(50); |
| break; |
| } |
| } |
| } |
| |
| if (errors & DISPC_IRQ_VID1_FIFO_UNDERFLOW) { |
| DSSERR("VID1_FIFO_UNDERFLOW, disabling VID1\n"); |
| for (i = 0; i < omap_dss_get_num_overlays(); ++i) { |
| struct omap_overlay *ovl; |
| ovl = omap_dss_get_overlay(i); |
| |
| if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) |
| continue; |
| |
| if (ovl->id == 1) { |
| dispc_enable_plane(ovl->id, 0); |
| dispc_go(ovl->manager->id); |
| mdelay(50); |
| break; |
| } |
| } |
| } |
| |
| if (errors & DISPC_IRQ_VID2_FIFO_UNDERFLOW) { |
| DSSERR("VID2_FIFO_UNDERFLOW, disabling VID2\n"); |
| for (i = 0; i < omap_dss_get_num_overlays(); ++i) { |
| struct omap_overlay *ovl; |
| ovl = omap_dss_get_overlay(i); |
| |
| if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) |
| continue; |
| |
| if (ovl->id == 2) { |
| dispc_enable_plane(ovl->id, 0); |
| dispc_go(ovl->manager->id); |
| mdelay(50); |
| break; |
| } |
| } |
| } |
| |
| if (errors & DISPC_IRQ_SYNC_LOST) { |
| struct omap_overlay_manager *manager = NULL; |
| bool enable = false; |
| |
| DSSERR("SYNC_LOST, disabling LCD\n"); |
| |
| for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { |
| struct omap_overlay_manager *mgr; |
| mgr = omap_dss_get_overlay_manager(i); |
| |
| if (mgr->id == OMAP_DSS_CHANNEL_LCD) { |
| manager = mgr; |
| enable = mgr->device->state == |
| OMAP_DSS_DISPLAY_ACTIVE; |
| mgr->device->disable(mgr->device); |
| break; |
| } |
| } |
| |
| if (manager) { |
| for (i = 0; i < omap_dss_get_num_overlays(); ++i) { |
| struct omap_overlay *ovl; |
| ovl = omap_dss_get_overlay(i); |
| |
| if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) |
| continue; |
| |
| if (ovl->id != 0 && ovl->manager == manager) |
| dispc_enable_plane(ovl->id, 0); |
| } |
| |
| dispc_go(manager->id); |
| mdelay(50); |
| if (enable) |
| manager->device->enable(manager->device); |
| } |
| } |
| |
| if (errors & DISPC_IRQ_SYNC_LOST_DIGIT) { |
| struct omap_overlay_manager *manager = NULL; |
| bool enable = false; |
| |
| DSSERR("SYNC_LOST_DIGIT, disabling TV\n"); |
| |
| for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { |
| struct omap_overlay_manager *mgr; |
| mgr = omap_dss_get_overlay_manager(i); |
| |
| if (mgr->id == OMAP_DSS_CHANNEL_DIGIT) { |
| manager = mgr; |
| enable = mgr->device->state == |
| OMAP_DSS_DISPLAY_ACTIVE; |
| mgr->device->disable(mgr->device); |
| break; |
| } |
| } |
| |
| if (manager) { |
| for (i = 0; i < omap_dss_get_num_overlays(); ++i) { |
| struct omap_overlay *ovl; |
| ovl = omap_dss_get_overlay(i); |
| |
| if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) |
| continue; |
| |
| if (ovl->id != 0 && ovl->manager == manager) |
| dispc_enable_plane(ovl->id, 0); |
| } |
| |
| dispc_go(manager->id); |
| mdelay(50); |
| if (enable) |
| manager->device->enable(manager->device); |
| } |
| } |
| |
| if (errors & DISPC_IRQ_OCP_ERR) { |
| DSSERR("OCP_ERR\n"); |
| for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { |
| struct omap_overlay_manager *mgr; |
| mgr = omap_dss_get_overlay_manager(i); |
| |
| if (mgr->caps & OMAP_DSS_OVL_CAP_DISPC) |
| mgr->device->disable(mgr->device); |
| } |
| } |
| |
| spin_lock_irqsave(&dispc.irq_lock, flags); |
| dispc.irq_error_mask |= errors; |
| _omap_dispc_set_irqs(); |
| spin_unlock_irqrestore(&dispc.irq_lock, flags); |
| } |
| |
| int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout) |
| { |
| void dispc_irq_wait_handler(void *data, u32 mask) |
| { |
| complete((struct completion *)data); |
| } |
| |
| int r; |
| DECLARE_COMPLETION_ONSTACK(completion); |
| |
| r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion, |
| irqmask); |
| |
| if (r) |
| return r; |
| |
| timeout = wait_for_completion_timeout(&completion, timeout); |
| |
| omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask); |
| |
| if (timeout == 0) |
| return -ETIMEDOUT; |
| |
| if (timeout == -ERESTARTSYS) |
| return -ERESTARTSYS; |
| |
| return 0; |
| } |
| |
| int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask, |
| unsigned long timeout) |
| { |
| void dispc_irq_wait_handler(void *data, u32 mask) |
| { |
| complete((struct completion *)data); |
| } |
| |
| int r; |
| DECLARE_COMPLETION_ONSTACK(completion); |
| |
| r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion, |
| irqmask); |
| |
| if (r) |
| return r; |
| |
| timeout = wait_for_completion_interruptible_timeout(&completion, |
| timeout); |
| |
| omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask); |
| |
| if (timeout == 0) |
| return -ETIMEDOUT; |
| |
| if (timeout == -ERESTARTSYS) |
| return -ERESTARTSYS; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC |
| void dispc_fake_vsync_irq(void) |
| { |
| u32 irqstatus = DISPC_IRQ_VSYNC; |
| int i; |
| |
| local_irq_disable(); |
| |
| for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { |
| struct omap_dispc_isr_data *isr_data; |
| isr_data = &dispc.registered_isr[i]; |
| |
| if (!isr_data->isr) |
| continue; |
| |
| if (isr_data->mask & irqstatus) |
| isr_data->isr(isr_data->arg, irqstatus); |
| } |
| |
| local_irq_enable(); |
| } |
| #endif |
| |
| static void _omap_dispc_initialize_irq(void) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dispc.irq_lock, flags); |
| |
| memset(dispc.registered_isr, 0, sizeof(dispc.registered_isr)); |
| |
| dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR; |
| |
| /* there's SYNC_LOST_DIGIT waiting after enabling the DSS, |
| * so clear it */ |
| dispc_write_reg(DISPC_IRQSTATUS, dispc_read_reg(DISPC_IRQSTATUS)); |
| |
| _omap_dispc_set_irqs(); |
| |
| spin_unlock_irqrestore(&dispc.irq_lock, flags); |
| } |
| |
| void dispc_enable_sidle(void) |
| { |
| REG_FLD_MOD(DISPC_SYSCONFIG, 2, 4, 3); /* SIDLEMODE: smart idle */ |
| } |
| |
| void dispc_disable_sidle(void) |
| { |
| REG_FLD_MOD(DISPC_SYSCONFIG, 1, 4, 3); /* SIDLEMODE: no idle */ |
| } |
| |
| static void _omap_dispc_initial_config(void) |
| { |
| u32 l; |
| |
| l = dispc_read_reg(DISPC_SYSCONFIG); |
| l = FLD_MOD(l, 2, 13, 12); /* MIDLEMODE: smart standby */ |
| l = FLD_MOD(l, 2, 4, 3); /* SIDLEMODE: smart idle */ |
| l = FLD_MOD(l, 1, 2, 2); /* ENWAKEUP */ |
| l = FLD_MOD(l, 1, 0, 0); /* AUTOIDLE */ |
| dispc_write_reg(DISPC_SYSCONFIG, l); |
| |
| /* FUNCGATED */ |
| REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9); |
| |
| /* L3 firewall setting: enable access to OCM RAM */ |
| /* XXX this should be somewhere in plat-omap */ |
| if (cpu_is_omap24xx()) |
| __raw_writel(0x402000b0, OMAP2_L3_IO_ADDRESS(0x680050a0)); |
| |
| _dispc_setup_color_conv_coef(); |
| |
| dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY); |
| |
| dispc_read_plane_fifo_sizes(); |
| } |
| |
| int dispc_init(void) |
| { |
| u32 rev; |
| |
| spin_lock_init(&dispc.irq_lock); |
| |
| INIT_WORK(&dispc.error_work, dispc_error_worker); |
| |
| dispc.base = ioremap(DISPC_BASE, DISPC_SZ_REGS); |
| if (!dispc.base) { |
| DSSERR("can't ioremap DISPC\n"); |
| return -ENOMEM; |
| } |
| |
| enable_clocks(1); |
| |
| _omap_dispc_initial_config(); |
| |
| _omap_dispc_initialize_irq(); |
| |
| dispc_save_context(); |
| |
| rev = dispc_read_reg(DISPC_REVISION); |
| printk(KERN_INFO "OMAP DISPC rev %d.%d\n", |
| FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); |
| |
| enable_clocks(0); |
| |
| return 0; |
| } |
| |
| void dispc_exit(void) |
| { |
| iounmap(dispc.base); |
| } |
| |
| int dispc_enable_plane(enum omap_plane plane, bool enable) |
| { |
| DSSDBG("dispc_enable_plane %d, %d\n", plane, enable); |
| |
| enable_clocks(1); |
| _dispc_enable_plane(plane, enable); |
| enable_clocks(0); |
| |
| return 0; |
| } |
| |
| int dispc_setup_plane(enum omap_plane plane, |
| u32 paddr, u16 screen_width, |
| u16 pos_x, u16 pos_y, |
| u16 width, u16 height, |
| u16 out_width, u16 out_height, |
| enum omap_color_mode color_mode, |
| bool ilace, |
| enum omap_dss_rotation_type rotation_type, |
| u8 rotation, bool mirror, u8 global_alpha) |
| { |
| int r = 0; |
| |
| DSSDBG("dispc_setup_plane %d, pa %x, sw %d, %d,%d, %dx%d -> " |
| "%dx%d, ilace %d, cmode %x, rot %d, mir %d\n", |
| plane, paddr, screen_width, pos_x, pos_y, |
| width, height, |
| out_width, out_height, |
| ilace, color_mode, |
| rotation, mirror); |
| |
| enable_clocks(1); |
| |
| r = _dispc_setup_plane(plane, |
| paddr, screen_width, |
| pos_x, pos_y, |
| width, height, |
| out_width, out_height, |
| color_mode, ilace, |
| rotation_type, |
| rotation, mirror, |
| global_alpha); |
| |
| enable_clocks(0); |
| |
| return r; |
| } |