[PATCH] drivers/input/keyboard: convert to dynamic input_dev allocation
Input: convert drivers/input/keyboard to dynamic input_dev allocation
This is required for input_dev sysfs integration
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c
index 4e8e8ea..3d63bc1 100644
--- a/drivers/input/keyboard/amikbd.c
+++ b/drivers/input/keyboard/amikbd.c
@@ -155,10 +155,7 @@
[7] = KERN_WARNING "amikbd: keyboard interrupt\n"
};
-static struct input_dev amikbd_dev;
-
-static char *amikbd_name = "Amiga keyboard";
-static char *amikbd_phys = "amikbd/input0";
+static struct input_dev *amikbd_dev;
static irqreturn_t amikbd_interrupt(int irq, void *dummy, struct pt_regs *fp)
{
@@ -176,16 +173,16 @@
scancode = amikbd_keycode[scancode];
- input_regs(&amikbd_dev, fp);
+ input_regs(amikbd_dev, fp);
if (scancode == KEY_CAPSLOCK) { /* CapsLock is a toggle switch key on Amiga */
- input_report_key(&amikbd_dev, scancode, 1);
- input_report_key(&amikbd_dev, scancode, 0);
- input_sync(&amikbd_dev);
+ input_report_key(amikbd_dev, scancode, 1);
+ input_report_key(amikbd_dev, scancode, 0);
} else {
- input_report_key(&amikbd_dev, scancode, down);
- input_sync(&amikbd_dev);
+ input_report_key(amikbd_dev, scancode, down);
}
+
+ input_sync(amikbd_dev);
} else /* scancodes >= 0x78 are error codes */
printk(amikbd_messages[scancode - 0x78]);
@@ -202,39 +199,41 @@
if (!request_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100, "amikeyb"))
return -EBUSY;
- init_input_dev(&amikbd_dev);
+ amikbd_dev = input_dev_allocate();
+ if (!amikbd_dev) {
+ printk(KERN_ERR "amikbd: not enough memory for input device\n");
+ release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100);
+ return -ENOMEM;
+ }
- amikbd_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
- amikbd_dev.keycode = amikbd_keycode;
- amikbd_dev.keycodesize = sizeof(unsigned char);
- amikbd_dev.keycodemax = ARRAY_SIZE(amikbd_keycode);
+ amikbd_dev->name = "Amiga Keyboard";
+ amikbd_dev->phys = "amikbd/input0";
+ amikbd_dev->id.bustype = BUS_AMIGA;
+ amikbd_dev->id.vendor = 0x0001;
+ amikbd_dev->id.product = 0x0001;
+ amikbd_dev->id.version = 0x0100;
+
+ amikbd_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ amikbd_dev->keycode = amikbd_keycode;
+ amikbd_dev->keycodesize = sizeof(unsigned char);
+ amikbd_dev->keycodemax = ARRAY_SIZE(amikbd_keycode);
for (i = 0; i < 0x78; i++)
if (amikbd_keycode[i])
- set_bit(amikbd_keycode[i], amikbd_dev.keybit);
+ set_bit(amikbd_keycode[i], amikbd_dev->keybit);
ciaa.cra &= ~0x41; /* serial data in, turn off TA */
request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd", amikbd_interrupt);
- amikbd_dev.name = amikbd_name;
- amikbd_dev.phys = amikbd_phys;
- amikbd_dev.id.bustype = BUS_AMIGA;
- amikbd_dev.id.vendor = 0x0001;
- amikbd_dev.id.product = 0x0001;
- amikbd_dev.id.version = 0x0100;
-
- input_register_device(&amikbd_dev);
-
- printk(KERN_INFO "input: %s\n", amikbd_name);
-
+ input_register_device(amikbd_dev);
return 0;
}
static void __exit amikbd_exit(void)
{
- input_unregister_device(&amikbd_dev);
free_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt);
- release_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100);
+ input_unregister_device(amikbd_dev);
+ release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100);
}
module_init(amikbd_init);