Merge branch 'for-3.2/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra into fixes
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index c279158..196b8b9 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -32,7 +32,7 @@
The Linux DRM layer contains code intended to support the needs
of complex graphics devices, usually containing programmable
pipelines well suited to 3D graphics acceleration. Graphics
- drivers in the kernel can make use of DRM functions to make
+ drivers in the kernel may make use of DRM functions to make
tasks like memory management, interrupt handling and DMA easier,
and provide a uniform interface to applications.
</para>
@@ -57,10 +57,10 @@
existing drivers.
</para>
<para>
- First, we'll go over some typical driver initialization
+ First, we go over some typical driver initialization
requirements, like setting up command buffers, creating an
initial output configuration, and initializing core services.
- Subsequent sections will cover core internals in more detail,
+ Subsequent sections cover core internals in more detail,
providing implementation notes and examples.
</para>
<para>
@@ -74,7 +74,7 @@
</para>
<para>
The core of every DRM driver is struct drm_driver. Drivers
- will typically statically initialize a drm_driver structure,
+ typically statically initialize a drm_driver structure,
then pass it to drm_init() at load time.
</para>
@@ -88,8 +88,8 @@
</para>
<programlisting>
static struct drm_driver driver = {
- /* don't use mtrr's here, the Xserver or user space app should
- * deal with them for intel hardware.
+ /* Don't use MTRRs here; the Xserver or userspace app should
+ * deal with them for Intel hardware.
*/
.driver_features =
DRIVER_USE_AGP | DRIVER_REQUIRE_AGP |
@@ -154,8 +154,8 @@
</programlisting>
<para>
In the example above, taken from the i915 DRM driver, the driver
- sets several flags indicating what core features it supports.
- We'll go over the individual callbacks in later sections. Since
+ sets several flags indicating what core features it supports;
+ we go over the individual callbacks in later sections. Since
flags indicate which features your driver supports to the DRM
core, you need to set most of them prior to calling drm_init(). Some,
like DRIVER_MODESET can be set later based on user supplied parameters,
@@ -203,8 +203,8 @@
<term>DRIVER_HAVE_IRQ</term><term>DRIVER_IRQ_SHARED</term>
<listitem>
<para>
- DRIVER_HAVE_IRQ indicates whether the driver has a IRQ
- handler, DRIVER_IRQ_SHARED indicates whether the device &
+ DRIVER_HAVE_IRQ indicates whether the driver has an IRQ
+ handler. DRIVER_IRQ_SHARED indicates whether the device &
handler support shared IRQs (note that this is required of
PCI drivers).
</para>
@@ -214,8 +214,8 @@
<term>DRIVER_DMA_QUEUE</term>
<listitem>
<para>
- If the driver queues DMA requests and completes them
- asynchronously, this flag should be set. Deprecated.
+ Should be set if the driver queues DMA requests and completes them
+ asynchronously. Deprecated.
</para>
</listitem>
</varlistentry>
@@ -238,7 +238,7 @@
</variablelist>
<para>
In this specific case, the driver requires AGP and supports
- IRQs. DMA, as we'll see, is handled by device specific ioctls
+ IRQs. DMA, as discussed later, is handled by device-specific ioctls
in this case. It also supports the kernel mode setting APIs, though
unlike in the actual i915 driver source, this example unconditionally
exports KMS capability.
@@ -269,36 +269,34 @@
initial output configuration.
</para>
<para>
- Note that the tasks performed at driver load time must not
- conflict with DRM client requirements. For instance, if user
+ If compatibility is a concern (e.g. with drivers converted over
+ to the new interfaces from the old ones), care must be taken to
+ prevent device initialization and control that is incompatible with
+ currently active userspace drivers. For instance, if user
level mode setting drivers are in use, it would be problematic
to perform output discovery & configuration at load time.
- Likewise, if pre-memory management aware user level drivers are
+ Likewise, if user-level drivers unaware of memory management are
in use, memory management and command buffer setup may need to
- be omitted. These requirements are driver specific, and care
+ be omitted. These requirements are driver-specific, and care
needs to be taken to keep both old and new applications and
libraries working. The i915 driver supports the "modeset"
module parameter to control whether advanced features are
- enabled at load time or in legacy fashion. If compatibility is
- a concern (e.g. with drivers converted over to the new interfaces
- from the old ones), care must be taken to prevent incompatible
- device initialization and control with the currently active
- userspace drivers.
+ enabled at load time or in legacy fashion.
</para>
<sect2>
<title>Driver private & performance counters</title>
<para>
The driver private hangs off the main drm_device structure and
- can be used for tracking various device specific bits of
+ can be used for tracking various device-specific bits of
information, like register offsets, command buffer status,
register state for suspend/resume, etc. At load time, a
- driver can simply allocate one and set drm_device.dev_priv
- appropriately; at unload the driver can free it and set
- drm_device.dev_priv to NULL.
+ driver may simply allocate one and set drm_device.dev_priv
+ appropriately; it should be freed and drm_device.dev_priv set
+ to NULL when the driver is unloaded.
</para>
<para>
- The DRM supports several counters which can be used for rough
+ The DRM supports several counters which may be used for rough
performance characterization. Note that the DRM stat counter
system is not often used by applications, and supporting
additional counters is completely optional.
@@ -307,15 +305,15 @@
These interfaces are deprecated and should not be used. If performance
monitoring is desired, the developer should investigate and
potentially enhance the kernel perf and tracing infrastructure to export
- GPU related performance information to performance monitoring
- tools and applications.
+ GPU related performance information for consumption by performance
+ monitoring tools and applications.
</para>
</sect2>
<sect2>
<title>Configuring the device</title>
<para>
- Obviously, device configuration will be device specific.
+ Obviously, device configuration is device-specific.
However, there are several common operations: finding a
device's PCI resources, mapping them, and potentially setting
up an IRQ handler.
@@ -323,10 +321,10 @@
<para>
Finding & mapping resources is fairly straightforward. The
DRM wrapper functions, drm_get_resource_start() and
- drm_get_resource_len() can be used to find BARs on the given
+ drm_get_resource_len(), may be used to find BARs on the given
drm_device struct. Once those values have been retrieved, the
driver load function can call drm_addmap() to create a new
- mapping for the BAR in question. Note you'll probably want a
+ mapping for the BAR in question. Note that you probably want a
drm_local_map_t in your driver private structure to track any
mappings you create.
<!-- !Fdrivers/gpu/drm/drm_bufs.c drm_get_resource_* -->
@@ -335,20 +333,20 @@
<para>
if compatibility with other operating systems isn't a concern
(DRM drivers can run under various BSD variants and OpenSolaris),
- native Linux calls can be used for the above, e.g. pci_resource_*
+ native Linux calls may be used for the above, e.g. pci_resource_*
and iomap*/iounmap. See the Linux device driver book for more
info.
</para>
<para>
- Once you have a register map, you can use the DRM_READn() and
+ Once you have a register map, you may use the DRM_READn() and
DRM_WRITEn() macros to access the registers on your device, or
- use driver specific versions to offset into your MMIO space
- relative to a driver specific base pointer (see I915_READ for
- example).
+ use driver-specific versions to offset into your MMIO space
+ relative to a driver-specific base pointer (see I915_READ for
+ an example).
</para>
<para>
If your device supports interrupt generation, you may want to
- setup an interrupt handler at driver load time as well. This
+ set up an interrupt handler when the driver is loaded. This
is done using the drm_irq_install() function. If your device
supports vertical blank interrupts, it should call
drm_vblank_init() to initialize the core vblank handling code before
@@ -357,7 +355,7 @@
</para>
<!--!Fdrivers/char/drm/drm_irq.c drm_irq_install-->
<para>
- Once your interrupt handler is registered (it'll use your
+ Once your interrupt handler is registered (it uses your
drm_driver.irq_handler as the actual interrupt handling
function), you can safely enable interrupts on your device,
assuming any other state your interrupt handler uses is also
@@ -371,10 +369,10 @@
using the pci_map_rom() call, a convenience function that
takes care of mapping the actual ROM, whether it has been
shadowed into memory (typically at address 0xc0000) or exists
- on the PCI device in the ROM BAR. Note that once you've
- mapped the ROM and extracted any necessary information, be
- sure to unmap it; on many devices the ROM address decoder is
- shared with other BARs, so leaving it mapped can cause
+ on the PCI device in the ROM BAR. Note that after the ROM
+ has been mapped and any necessary information has been extracted,
+ it should be unmapped; on many devices, the ROM address decoder is
+ shared with other BARs, so leaving it mapped could cause
undesired behavior like hangs or memory corruption.
<!--!Fdrivers/pci/rom.c pci_map_rom-->
</para>
@@ -389,9 +387,9 @@
should support a memory manager.
</para>
<para>
- If your driver supports memory management (it should!), you'll
+ If your driver supports memory management (it should!), you
need to set that up at load time as well. How you initialize
- it depends on which memory manager you're using, TTM or GEM.
+ it depends on which memory manager you're using: TTM or GEM.
</para>
<sect3>
<title>TTM initialization</title>
@@ -401,7 +399,7 @@
and devices with dedicated video RAM (VRAM), i.e. most discrete
graphics devices. If your device has dedicated RAM, supporting
TTM is desirable. TTM also integrates tightly with your
- driver specific buffer execution function. See the radeon
+ driver-specific buffer execution function. See the radeon
driver for examples.
</para>
<para>
@@ -429,21 +427,21 @@
created by the memory manager at runtime. Your global TTM should
have a type of TTM_GLOBAL_TTM_MEM. The size field for the global
object should be sizeof(struct ttm_mem_global), and the init and
- release hooks should point at your driver specific init and
- release routines, which will probably eventually call
- ttm_mem_global_init and ttm_mem_global_release respectively.
+ release hooks should point at your driver-specific init and
+ release routines, which probably eventually call
+ ttm_mem_global_init and ttm_mem_global_release, respectively.
</para>
<para>
Once your global TTM accounting structure is set up and initialized
- (done by calling ttm_global_item_ref on the global object you
- just created), you'll need to create a buffer object TTM to
+ by calling ttm_global_item_ref() on it,
+ you need to create a buffer object TTM to
provide a pool for buffer object allocation by clients and the
kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO,
and its size should be sizeof(struct ttm_bo_global). Again,
- driver specific init and release functions can be provided,
- likely eventually calling ttm_bo_global_init and
- ttm_bo_global_release, respectively. Also like the previous
- object, ttm_global_item_ref is used to create an initial reference
+ driver-specific init and release functions may be provided,
+ likely eventually calling ttm_bo_global_init() and
+ ttm_bo_global_release(), respectively. Also, like the previous
+ object, ttm_global_item_ref() is used to create an initial reference
count for the TTM, which will call your initialization function.
</para>
</sect3>
@@ -453,27 +451,26 @@
GEM is an alternative to TTM, designed specifically for UMA
devices. It has simpler initialization and execution requirements
than TTM, but has no VRAM management capability. Core GEM
- initialization is comprised of a basic drm_mm_init call to create
+ is initialized by calling drm_mm_init() to create
a GTT DRM MM object, which provides an address space pool for
- object allocation. In a KMS configuration, the driver will
- need to allocate and initialize a command ring buffer following
- basic GEM initialization. Most UMA devices have a so-called
+ object allocation. In a KMS configuration, the driver
+ needs to allocate and initialize a command ring buffer following
+ core GEM initialization. A UMA device usually has what is called a
"stolen" memory region, which provides space for the initial
framebuffer and large, contiguous memory regions required by the
- device. This space is not typically managed by GEM, and must
+ device. This space is not typically managed by GEM, and it must
be initialized separately into its own DRM MM object.
</para>
<para>
- Initialization will be driver specific, and will depend on
- the architecture of the device. In the case of Intel
+ Initialization is driver-specific. In the case of Intel
integrated graphics chips like 965GM, GEM initialization can
be done by calling the internal GEM init function,
i915_gem_do_init(). Since the 965GM is a UMA device
- (i.e. it doesn't have dedicated VRAM), GEM will manage
+ (i.e. it doesn't have dedicated VRAM), GEM manages
making regular RAM available for GPU operations. Memory set
aside by the BIOS (called "stolen" memory by the i915
- driver) will be managed by the DRM memrange allocator; the
- rest of the aperture will be managed by GEM.
+ driver) is managed by the DRM memrange allocator; the
+ rest of the aperture is managed by GEM.
<programlisting>
/* Basic memrange allocator for stolen space (aka vram) */
drm_memrange_init(&dev_priv->vram, 0, prealloc_size);
@@ -483,7 +480,7 @@
<!--!Edrivers/char/drm/drm_memrange.c-->
</para>
<para>
- Once the memory manager has been set up, we can allocate the
+ Once the memory manager has been set up, we may allocate the
command buffer. In the i915 case, this is also done with a
GEM function, i915_gem_init_ringbuffer().
</para>
@@ -493,16 +490,25 @@
<sect2>
<title>Output configuration</title>
<para>
- The final initialization task is output configuration. This involves
- finding and initializing the CRTCs, encoders and connectors
- for your device, creating an initial configuration and
- registering a framebuffer console driver.
+ The final initialization task is output configuration. This involves:
+ <itemizedlist>
+ <listitem>
+ Finding and initializing the CRTCs, encoders, and connectors
+ for the device.
+ </listitem>
+ <listitem>
+ Creating an initial configuration.
+ </listitem>
+ <listitem>
+ Registering a framebuffer console driver.
+ </listitem>
+ </itemizedlist>
</para>
<sect3>
<title>Output discovery and initialization</title>
<para>
- Several core functions exist to create CRTCs, encoders and
- connectors, namely drm_crtc_init(), drm_connector_init() and
+ Several core functions exist to create CRTCs, encoders, and
+ connectors, namely: drm_crtc_init(), drm_connector_init(), and
drm_encoder_init(), along with several "helper" functions to
perform common tasks.
</para>
@@ -555,10 +561,10 @@
</programlisting>
<para>
In the example above (again, taken from the i915 driver), a
- CRT connector and encoder combination is created. A device
- specific i2c bus is also created, for fetching EDID data and
+ CRT connector and encoder combination is created. A device-specific
+ i2c bus is also created for fetching EDID data and
performing monitor detection. Once the process is complete,
- the new connector is registered with sysfs, to make its
+ the new connector is registered with sysfs to make its
properties available to applications.
</para>
<sect4>
@@ -567,12 +573,12 @@
Since many PC-class graphics devices have similar display output
designs, the DRM provides a set of helper functions to make
output management easier. The core helper routines handle
- encoder re-routing and disabling of unused functions following
- mode set. Using the helpers is optional, but recommended for
+ encoder re-routing and the disabling of unused functions following
+ mode setting. Using the helpers is optional, but recommended for
devices with PC-style architectures (i.e. a set of display planes
for feeding pixels to encoders which are in turn routed to
connectors). Devices with more complex requirements needing
- finer grained management can opt to use the core callbacks
+ finer grained management may opt to use the core callbacks
directly.
</para>
<para>
@@ -580,17 +586,25 @@
</para>
</sect4>
<para>
- For each encoder, CRTC and connector, several functions must
- be provided, depending on the object type. Encoder objects
- need to provide a DPMS (basically on/off) function, mode fixup
- (for converting requested modes into native hardware timings),
- and prepare, set and commit functions for use by the core DRM
- helper functions. Connector helpers need to provide mode fetch and
- validity functions as well as an encoder matching function for
- returning an ideal encoder for a given connector. The core
- connector functions include a DPMS callback, (deprecated)
- save/restore routines, detection, mode probing, property handling,
- and cleanup functions.
+ Each encoder object needs to provide:
+ <itemizedlist>
+ <listitem>
+ A DPMS (basically on/off) function.
+ </listitem>
+ <listitem>
+ A mode-fixup function (for converting requested modes into
+ native hardware timings).
+ </listitem>
+ <listitem>
+ Functions (prepare, set, and commit) for use by the core DRM
+ helper functions.
+ </listitem>
+ </itemizedlist>
+ Connector helpers need to provide functions (mode-fetch, validity,
+ and encoder-matching) for returning an ideal encoder for a given
+ connector. The core connector functions include a DPMS callback,
+ save/restore routines (deprecated), detection, mode probing,
+ property handling, and cleanup functions.
</para>
<!--!Edrivers/char/drm/drm_crtc.h-->
<!--!Edrivers/char/drm/drm_crtc.c-->
@@ -605,23 +619,34 @@
<title>VBlank event handling</title>
<para>
The DRM core exposes two vertical blank related ioctls:
- DRM_IOCTL_WAIT_VBLANK and DRM_IOCTL_MODESET_CTL.
+ <variablelist>
+ <varlistentry>
+ <term>DRM_IOCTL_WAIT_VBLANK</term>
+ <listitem>
+ <para>
+ This takes a struct drm_wait_vblank structure as its argument,
+ and it is used to block or request a signal when a specified
+ vblank event occurs.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>DRM_IOCTL_MODESET_CTL</term>
+ <listitem>
+ <para>
+ This should be called by application level drivers before and
+ after mode setting, since on many devices the vertical blank
+ counter is reset at that time. Internally, the DRM snapshots
+ the last vblank count when the ioctl is called with the
+ _DRM_PRE_MODESET command, so that the counter won't go backwards
+ (which is dealt with when _DRM_POST_MODESET is used).
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
<!--!Edrivers/char/drm/drm_irq.c-->
</para>
<para>
- DRM_IOCTL_WAIT_VBLANK takes a struct drm_wait_vblank structure
- as its argument, and is used to block or request a signal when a
- specified vblank event occurs.
- </para>
- <para>
- DRM_IOCTL_MODESET_CTL should be called by application level
- drivers before and after mode setting, since on many devices the
- vertical blank counter will be reset at that time. Internally,
- the DRM snapshots the last vblank count when the ioctl is called
- with the _DRM_PRE_MODESET command so that the counter won't go
- backwards (which is dealt with when _DRM_POST_MODESET is used).
- </para>
- <para>
To support the functions above, the DRM core provides several
helper functions for tracking vertical blank counters, and
requires drivers to provide several callbacks:
@@ -632,24 +657,24 @@
register. The enable and disable vblank callbacks should enable
and disable vertical blank interrupts, respectively. In the
absence of DRM clients waiting on vblank events, the core DRM
- code will use the disable_vblank() function to disable
- interrupts, which saves power. They'll be re-enabled again when
+ code uses the disable_vblank() function to disable
+ interrupts, which saves power. They are re-enabled again when
a client calls the vblank wait ioctl above.
</para>
<para>
- Devices that don't provide a count register can simply use an
+ A device that doesn't provide a count register may simply use an
internal atomic counter incremented on every vertical blank
- interrupt, and can make their enable and disable vblank
- functions into no-ops.
+ interrupt (and then treat the enable_vblank() and disable_vblank()
+ callbacks as no-ops).
</para>
</sect1>
<sect1>
<title>Memory management</title>
<para>
- The memory manager lies at the heart of many DRM operations, and
- is also required to support advanced client features like OpenGL
- pbuffers. The DRM currently contains two memory managers, TTM
+ The memory manager lies at the heart of many DRM operations; it
+ is required to support advanced client features like OpenGL
+ pbuffers. The DRM currently contains two memory managers: TTM
and GEM.
</para>
@@ -679,41 +704,46 @@
<para>
GEM-enabled drivers must provide gem_init_object() and
gem_free_object() callbacks to support the core memory
- allocation routines. They should also provide several driver
- specific ioctls to support command execution, pinning, buffer
+ allocation routines. They should also provide several driver-specific
+ ioctls to support command execution, pinning, buffer
read & write, mapping, and domain ownership transfers.
</para>
<para>
- On a fundamental level, GEM involves several operations: memory
- allocation and freeing, command execution, and aperture management
- at command execution time. Buffer object allocation is relatively
+ On a fundamental level, GEM involves several operations:
+ <itemizedlist>
+ <listitem>Memory allocation and freeing</listitem>
+ <listitem>Command execution</listitem>
+ <listitem>Aperture management at command execution time</listitem>
+ </itemizedlist>
+ Buffer object allocation is relatively
straightforward and largely provided by Linux's shmem layer, which
provides memory to back each object. When mapped into the GTT
or used in a command buffer, the backing pages for an object are
flushed to memory and marked write combined so as to be coherent
- with the GPU. Likewise, when the GPU finishes rendering to an object,
- if the CPU accesses it, it must be made coherent with the CPU's view
+ with the GPU. Likewise, if the CPU accesses an object after the GPU
+ has finished rendering to the object, then the object must be made
+ coherent with the CPU's view
of memory, usually involving GPU cache flushing of various kinds.
- This core CPU<->GPU coherency management is provided by the GEM
- set domain function, which evaluates an object's current domain and
+ This core CPU<->GPU coherency management is provided by a
+ device-specific ioctl, which evaluates an object's current domain and
performs any necessary flushing or synchronization to put the object
into the desired coherency domain (note that the object may be busy,
- i.e. an active render target; in that case the set domain function
- will block the client and wait for rendering to complete before
+ i.e. an active render target; in that case, setting the domain
+ blocks the client and waits for rendering to complete before
performing any necessary flushing operations).
</para>
<para>
Perhaps the most important GEM function is providing a command
execution interface to clients. Client programs construct command
- buffers containing references to previously allocated memory objects
- and submit them to GEM. At that point, GEM will take care to bind
+ buffers containing references to previously allocated memory objects,
+ and then submit them to GEM. At that point, GEM takes care to bind
all the objects into the GTT, execute the buffer, and provide
necessary synchronization between clients accessing the same buffers.
This often involves evicting some objects from the GTT and re-binding
others (a fairly expensive operation), and providing relocation
support which hides fixed GTT offsets from clients. Clients must
take care not to submit command buffers that reference more objects
- than can fit in the GTT or GEM will reject them and no rendering
+ than can fit in the GTT; otherwise, GEM will reject them and no rendering
will occur. Similarly, if several objects in the buffer require
fence registers to be allocated for correct rendering (e.g. 2D blits
on pre-965 chips), care must be taken not to require more fence
@@ -729,7 +759,7 @@
<title>Output management</title>
<para>
At the core of the DRM output management code is a set of
- structures representing CRTCs, encoders and connectors.
+ structures representing CRTCs, encoders, and connectors.
</para>
<para>
A CRTC is an abstraction representing a part of the chip that
@@ -765,21 +795,19 @@
<sect1>
<title>Framebuffer management</title>
<para>
- In order to set a mode on a given CRTC, encoder and connector
- configuration, clients need to provide a framebuffer object which
- will provide a source of pixels for the CRTC to deliver to the encoder(s)
- and ultimately the connector(s) in the configuration. A framebuffer
- is fundamentally a driver specific memory object, made into an opaque
- handle by the DRM addfb function. Once an fb has been created this
- way it can be passed to the KMS mode setting routines for use in
- a configuration.
+ Clients need to provide a framebuffer object which provides a source
+ of pixels for a CRTC to deliver to the encoder(s) and ultimately the
+ connector(s). A framebuffer is fundamentally a driver-specific memory
+ object, made into an opaque handle by the DRM's addfb() function.
+ Once a framebuffer has been created this way, it may be passed to the
+ KMS mode setting routines for use in a completed configuration.
</para>
</sect1>
<sect1>
<title>Command submission & fencing</title>
<para>
- This should cover a few device specific command submission
+ This should cover a few device-specific command submission
implementations.
</para>
</sect1>
@@ -789,7 +817,7 @@
<para>
The DRM core provides some suspend/resume code, but drivers
wanting full suspend/resume support should provide save() and
- restore() functions. These will be called at suspend,
+ restore() functions. These are called at suspend,
hibernate, or resume time, and should perform any state save or
restore required by your device across suspend or hibernate
states.
@@ -812,8 +840,8 @@
<para>
The DRM core exports several interfaces to applications,
generally intended to be used through corresponding libdrm
- wrapper functions. In addition, drivers export device specific
- interfaces for use by userspace drivers & device aware
+ wrapper functions. In addition, drivers export device-specific
+ interfaces for use by userspace drivers & device-aware
applications through ioctls and sysfs files.
</para>
<para>
@@ -822,8 +850,8 @@
management, memory management, and output management.
</para>
<para>
- Cover generic ioctls and sysfs layout here. Only need high
- level info, since man pages will cover the rest.
+ Cover generic ioctls and sysfs layout here. We only need high-level
+ info, since man pages should cover the rest.
</para>
</chapter>
diff --git a/Documentation/cgroups/freezer-subsystem.txt b/Documentation/cgroups/freezer-subsystem.txt
index c21d777..7e62de1 100644
--- a/Documentation/cgroups/freezer-subsystem.txt
+++ b/Documentation/cgroups/freezer-subsystem.txt
@@ -33,9 +33,9 @@
From a second, unrelated bash shell:
$ kill -SIGSTOP 16690
- $ kill -SIGCONT 16990
+ $ kill -SIGCONT 16690
- <at this point 16990 exits and causes 16644 to exit too>
+ <at this point 16690 exits and causes 16644 to exit too>
This happens because bash can observe both signals and choose how it
responds to them.
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index a4401d6..adad70d 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -98,7 +98,7 @@
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
static struct resource usba_udc_resources[] = {
[0] = {
@@ -1021,8 +1021,8 @@
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -1035,7 +1035,6 @@
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 01d8bbd..66591fa 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -877,8 +877,8 @@
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -891,7 +891,6 @@
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 24b6f8c..25e3464 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -837,8 +837,8 @@
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -851,7 +851,6 @@
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 3b70b389..ae78f4d 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -816,8 +816,8 @@
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -830,7 +830,6 @@
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 3faa1fd..ad017eb 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -1196,8 +1196,8 @@
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -1210,7 +1210,6 @@
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 000b5e1..09a16d6 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -197,7 +197,7 @@
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
static struct resource usba_udc_resources[] = {
[0] = {
.start = AT91SAM9G45_UDPHS_FIFO,
@@ -1332,8 +1332,8 @@
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -1346,7 +1346,6 @@
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0,
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 305a851..628eb56 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -75,7 +75,7 @@
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
static struct resource usba_udc_resources[] = {
[0] = {
@@ -908,8 +908,8 @@
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -922,7 +922,6 @@
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 649b052..12a3f95 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -384,7 +384,7 @@
#include <video/s1d13xxxfb.h>
-static void __init yl9200_init_video(void)
+static void yl9200_init_video(void)
{
/* NWAIT Signal */
at91_set_A_periph(AT91_PIN_PC6, 0);
diff --git a/arch/arm/mach-at91/include/mach/vmalloc.h b/arch/arm/mach-at91/include/mach/vmalloc.h
index 8eb459f..8e4a1bd 100644
--- a/arch/arm/mach-at91/include/mach/vmalloc.h
+++ b/arch/arm/mach-at91/include/mach/vmalloc.h
@@ -21,6 +21,8 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
+#include <mach/hardware.h>
+
#define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK)
#endif
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 2aacf41..6312425 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1634,6 +1634,7 @@
return 0;
}
+#ifdef CONFIG_OF
static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
unsigned long *ckih1, unsigned long *ckih2)
{
@@ -1671,3 +1672,4 @@
clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
return mx53_clocks_init(ckil, osc, ckih1, ckih2);
}
+#endif
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index ac2316d..064ec5a 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -471,7 +471,8 @@
"mmc0-slot-power");
if (ret)
pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
- mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
+ else
+ mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW,
"mmc1-slot-power");
@@ -480,7 +481,6 @@
else
mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
- mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
mx28_add_rtc_stmp3xxx();
gpio_led_register_device(0, &mx28evk_led_data);
diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c
index 8875fb4..55f1569 100644
--- a/arch/arm/plat-mxc/avic.c
+++ b/arch/arm/plat-mxc/avic.c
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <mach/common.h>
#include <asm/mach/irq.h>
+#include <asm/exception.h>
#include <mach/hardware.h>
#include "irq-common.h"
diff --git a/arch/arm/plat-mxc/gic.c b/arch/arm/plat-mxc/gic.c
index b3b8eed..12f8f81 100644
--- a/arch/arm/plat-mxc/gic.c
+++ b/arch/arm/plat-mxc/gic.c
@@ -28,21 +28,14 @@
if (irqnr == 1023)
break;
- if (irqnr > 29 && irqnr < 1021)
+ if (irqnr > 15 && irqnr < 1021)
handle_IRQ(irqnr, regs);
#ifdef CONFIG_SMP
- else if (irqnr < 16) {
+ else {
writel_relaxed(irqstat, gic_cpu_base_addr +
GIC_CPU_EOI);
handle_IPI(irqnr, regs);
}
#endif
-#ifdef CONFIG_LOCAL_TIMERS
- else if (irqnr == 29) {
- writel_relaxed(irqstat, gic_cpu_base_addr +
- GIC_CPU_EOI);
- handle_local_timer(regs);
- }
-#endif
} while (1);
}
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 9fe0dfc..ca5cf26 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -25,6 +25,3 @@
.macro test_for_ipi, irqnr, irqstat, base, tmp
.endm
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- .endm
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index e993a184..a3c164c 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <asm/mach/irq.h>
+#include <asm/exception.h>
#include <mach/hardware.h>
#include <mach/common.h>
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index 6260d5d..c7cb0af 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -406,8 +406,10 @@
#define __NR_syncfs 335
#define __NR_sendmmsg 336
#define __NR_setns 337
+#define __NR_process_vm_readv 338
+#define __NR_process_vm_writev 339
-#define NR_syscalls 338
+#define NR_syscalls 340
#ifdef __32bit_syscall_numbers__
/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 09d8ec4..63402f9 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -84,4 +84,4 @@
/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
/*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
/*330*/ .long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
-/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns
+/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index edbec45..db86b1a 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -85,7 +85,7 @@
/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init
/*330*/ .word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime
- .word sys_syncfs, compat_sys_sendmmsg, sys_setns
+ .word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev
#endif /* CONFIG_COMPAT */
@@ -162,4 +162,4 @@
/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
/*330*/ .word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
- .word sys_syncfs, sys_sendmmsg, sys_setns
+ .word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index 434a6c0..95706fa 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -669,7 +669,7 @@
struct device_opp *dev_opp = find_device_opp(dev);
if (IS_ERR(dev_opp))
- return ERR_PTR(PTR_ERR(dev_opp)); /* matching type */
+ return ERR_CAST(dev_opp); /* matching type */
return &dev_opp->head;
}
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index cc531bb..e9c2cfe 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -789,8 +789,8 @@
};
static struct drm_driver driver = {
- /* don't use mtrr's here, the Xserver or user space app should
- * deal with them for intel hardware.
+ /* Don't use MTRRs here; the Xserver or userspace app should
+ * deal with them for Intel hardware.
*/
.driver_features =
DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/
diff --git a/drivers/hwspinlock/u8500_hsem.c b/drivers/hwspinlock/u8500_hsem.c
index 143461a..86980fe 100644
--- a/drivers/hwspinlock/u8500_hsem.c
+++ b/drivers/hwspinlock/u8500_hsem.c
@@ -21,6 +21,7 @@
* General Public License for more details.
*/
+#include <linux/module.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/pm_runtime.h>
@@ -108,10 +109,8 @@
return -ENODEV;
io_base = ioremap(res->start, resource_size(res));
- if (!io_base) {
- ret = -ENOMEM;
- goto free_state;
- }
+ if (!io_base)
+ return -ENOMEM;
/* make sure protocol 1 is selected */
val = readl(io_base + HSEM_CTRL_REG);
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 472aedf..297e260 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3110,7 +3110,7 @@
struct r5dev *pdev, *qdev;
clear_bit(STRIPE_HANDLE, &sh->state);
- if (test_and_set_bit(STRIPE_ACTIVE, &sh->state)) {
+ if (test_and_set_bit_lock(STRIPE_ACTIVE, &sh->state)) {
/* already being handled, ensure it gets handled
* again when current action finishes */
set_bit(STRIPE_HANDLE, &sh->state);
@@ -3159,10 +3159,14 @@
/* check if the array has lost more than max_degraded devices and,
* if so, some requests might need to be failed.
*/
- if (s.failed > conf->max_degraded && s.to_read+s.to_write+s.written)
- handle_failed_stripe(conf, sh, &s, disks, &s.return_bi);
- if (s.failed > conf->max_degraded && s.syncing)
- handle_failed_sync(conf, sh, &s);
+ if (s.failed > conf->max_degraded) {
+ sh->check_state = 0;
+ sh->reconstruct_state = 0;
+ if (s.to_read+s.to_write+s.written)
+ handle_failed_stripe(conf, sh, &s, disks, &s.return_bi);
+ if (s.syncing)
+ handle_failed_sync(conf, sh, &s);
+ }
/*
* might be able to return some write requests if the parity blocks
@@ -3371,7 +3375,7 @@
return_io(s.return_bi);
- clear_bit(STRIPE_ACTIVE, &sh->state);
+ clear_bit_unlock(STRIPE_ACTIVE, &sh->state);
}
static void raid5_activate_delayed(struct r5conf *conf)
diff --git a/drivers/media/video/s5k6aa.c b/drivers/media/video/s5k6aa.c
index 2446736..0df7f2a 100644
--- a/drivers/media/video/s5k6aa.c
+++ b/drivers/media/video/s5k6aa.c
@@ -19,6 +19,7 @@
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/media.h>
+#include <linux/module.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c
index 4175544..ec10629 100644
--- a/drivers/mfd/ab5500-core.c
+++ b/drivers/mfd/ab5500-core.c
@@ -13,6 +13,7 @@
* TODO: Event handling with irq_chip. Waiting for PRCMU fw support.
*/
+#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/platform_device.h>
diff --git a/drivers/mfd/ab5500-debugfs.c b/drivers/mfd/ab5500-debugfs.c
index 6be1fe6..43c0ebb 100644
--- a/drivers/mfd/ab5500-debugfs.c
+++ b/drivers/mfd/ab5500-debugfs.c
@@ -4,6 +4,7 @@
* Debugfs support for the AB5500 MFD driver
*/
+#include <linux/export.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/mfd/ab5500/ab5500.h>
diff --git a/drivers/mtd/maps/bcm963xx-flash.c b/drivers/mtd/maps/bcm963xx-flash.c
index 608967f..736ca10 100644
--- a/drivers/mtd/maps/bcm963xx-flash.c
+++ b/drivers/mtd/maps/bcm963xx-flash.c
@@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/mtd/map.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index f4e3d82..7f43cf8 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -83,8 +83,10 @@
depends on EXPERIMENTAL
depends on BACKLIGHT_CLASS_DEVICE
depends on RFKILL || RFKILL = n
- depends on POWER_SUPPLY
depends on SERIO_I8042
+ select POWER_SUPPLY
+ select LEDS_CLASS
+ select NEW_LEDS
default n
---help---
This driver adds support for rfkill and backlight control to Dell
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 79665e2..16d6a83 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -907,7 +907,7 @@
/*-------------------------------------------------------------------------*/
-static int __init atmel_spi_probe(struct platform_device *pdev)
+static int __devinit atmel_spi_probe(struct platform_device *pdev)
{
struct resource *regs;
int irq;
@@ -1003,7 +1003,7 @@
return ret;
}
-static int __exit atmel_spi_remove(struct platform_device *pdev)
+static int __devexit atmel_spi_remove(struct platform_device *pdev)
{
struct spi_master *master = platform_get_drvdata(pdev);
struct atmel_spi *as = spi_master_get_devdata(master);
@@ -1072,6 +1072,7 @@
},
.suspend = atmel_spi_suspend,
.resume = atmel_spi_resume,
+ .probe = atmel_spi_probe,
.remove = __exit_p(atmel_spi_remove),
};
module_platform_driver(atmel_spi_driver);
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 4cb0d0a..fc7bbba 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -66,14 +66,16 @@
static int debug;
module_param(debug, int, 0600);
-#define T1 (HZ/10)
-#define T2 (HZ/3)
-#define N2 3
+/* Defaults: these are from the specification */
+
+#define T1 10 /* 100mS */
+#define T2 34 /* 333mS */
+#define N2 3 /* Retry 3 times */
/* Use long timers for testing at low speed with debug on */
#ifdef DEBUG_TIMING
-#define T1 HZ
-#define T2 (2 * HZ)
+#define T1 100
+#define T2 200
#endif
/*
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index afb9458..98ce812 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -41,7 +41,7 @@
unsigned long total_time;
unsigned long busy_time;
unsigned long current_frequency;
- void *private_date;
+ void *private_data;
};
/**
diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h
index 08a2fee..aad6bd4 100644
--- a/include/linux/hwspinlock.h
+++ b/include/linux/hwspinlock.h
@@ -118,7 +118,6 @@
static inline
void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
{
- return 0;
}
static inline int hwspin_lock_get_id(struct hwspinlock *hwlock)
diff --git a/kernel/power/qos.c b/kernel/power/qos.c
index 56db751..995e3bd 100644
--- a/kernel/power/qos.c
+++ b/kernel/power/qos.c
@@ -70,6 +70,7 @@
};
static struct pm_qos_object cpu_dma_pm_qos = {
.constraints = &cpu_dma_constraints,
+ .name = "cpu_dma_latency",
};
static BLOCKING_NOTIFIER_HEAD(network_lat_notifier);
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 8d02ccb..30e2bef 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -42,6 +42,7 @@
$default{"BISECT_SKIP"} = 1;
$default{"SUCCESS_LINE"} = "login:";
$default{"DETECT_TRIPLE_FAULT"} = 1;
+$default{"NO_INSTALL"} = 0;
$default{"BOOTED_TIMEOUT"} = 1;
$default{"DIE_ON_FAILURE"} = 1;
$default{"SSH_EXEC"} = "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND";
@@ -84,6 +85,7 @@
my $target;
my $make;
my $post_install;
+my $no_install;
my $noclean;
my $minconfig;
my $start_minconfig;
@@ -115,6 +117,7 @@
my $booted_timeout;
my $detect_triplefault;
my $console;
+my $reboot_success_line;
my $success_line;
my $stop_after_success;
my $stop_after_failure;
@@ -130,6 +133,12 @@
my %variable;
my %force_config;
+# do not force reboots on config problems
+my $no_reboot = 1;
+
+# default variables that can be used
+chomp ($variable{"PWD"} = `pwd`);
+
$config_help{"MACHINE"} = << "EOF"
The machine hostname that you will test.
EOF
@@ -241,6 +250,7 @@
sub get_ktest_config {
my ($config) = @_;
+ my $ans;
return if (defined($opt{$config}));
@@ -254,16 +264,17 @@
if (defined($default{$config})) {
print "\[$default{$config}\] ";
}
- $entered_configs{$config} = <STDIN>;
- $entered_configs{$config} =~ s/^\s*(.*\S)\s*$/$1/;
- if ($entered_configs{$config} =~ /^\s*$/) {
+ $ans = <STDIN>;
+ $ans =~ s/^\s*(.*\S)\s*$/$1/;
+ if ($ans =~ /^\s*$/) {
if ($default{$config}) {
- $entered_configs{$config} = $default{$config};
+ $ans = $default{$config};
} else {
print "Your answer can not be blank\n";
next;
}
}
+ $entered_configs{$config} = process_variables($ans);
last;
}
}
@@ -298,7 +309,7 @@
}
sub process_variables {
- my ($value) = @_;
+ my ($value, $remove_undef) = @_;
my $retval = "";
# We want to check for '\', and it is just easier
@@ -316,6 +327,10 @@
$retval = "$retval$begin";
if (defined($variable{$var})) {
$retval = "$retval$variable{$var}";
+ } elsif (defined($remove_undef) && $remove_undef) {
+ # for if statements, any variable that is not defined,
+ # we simple convert to 0
+ $retval = "${retval}0";
} else {
# put back the origin piece.
$retval = "$retval\$\{$var\}";
@@ -331,10 +346,17 @@
}
sub set_value {
- my ($lvalue, $rvalue) = @_;
+ my ($lvalue, $rvalue, $override, $overrides, $name) = @_;
if (defined($opt{$lvalue})) {
- die "Error: Option $lvalue defined more than once!\n";
+ if (!$override || defined(${$overrides}{$lvalue})) {
+ my $extra = "";
+ if ($override) {
+ $extra = "In the same override section!\n";
+ }
+ die "$name: $.: Option $lvalue defined more than once!\n$extra";
+ }
+ ${$overrides}{$lvalue} = $rvalue;
}
if ($rvalue =~ /^\s*$/) {
delete $opt{$lvalue};
@@ -355,86 +377,274 @@
}
}
-sub read_config {
- my ($config) = @_;
+sub process_compare {
+ my ($lval, $cmp, $rval) = @_;
- open(IN, $config) || die "can't read file $config";
+ # remove whitespace
+
+ $lval =~ s/^\s*//;
+ $lval =~ s/\s*$//;
+
+ $rval =~ s/^\s*//;
+ $rval =~ s/\s*$//;
+
+ if ($cmp eq "==") {
+ return $lval eq $rval;
+ } elsif ($cmp eq "!=") {
+ return $lval ne $rval;
+ }
+
+ my $statement = "$lval $cmp $rval";
+ my $ret = eval $statement;
+
+ # $@ stores error of eval
+ if ($@) {
+ return -1;
+ }
+
+ return $ret;
+}
+
+sub value_defined {
+ my ($val) = @_;
+
+ return defined($variable{$2}) ||
+ defined($opt{$2});
+}
+
+my $d = 0;
+sub process_expression {
+ my ($name, $val) = @_;
+
+ my $c = $d++;
+
+ while ($val =~ s/\(([^\(]*?)\)/\&\&\&\&VAL\&\&\&\&/) {
+ my $express = $1;
+
+ if (process_expression($name, $express)) {
+ $val =~ s/\&\&\&\&VAL\&\&\&\&/ 1 /;
+ } else {
+ $val =~ s/\&\&\&\&VAL\&\&\&\&/ 0 /;
+ }
+ }
+
+ $d--;
+ my $OR = "\\|\\|";
+ my $AND = "\\&\\&";
+
+ while ($val =~ s/^(.*?)($OR|$AND)//) {
+ my $express = $1;
+ my $op = $2;
+
+ if (process_expression($name, $express)) {
+ if ($op eq "||") {
+ return 1;
+ }
+ } else {
+ if ($op eq "&&") {
+ return 0;
+ }
+ }
+ }
+
+ if ($val =~ /(.*)(==|\!=|>=|<=|>|<)(.*)/) {
+ my $ret = process_compare($1, $2, $3);
+ if ($ret < 0) {
+ die "$name: $.: Unable to process comparison\n";
+ }
+ return $ret;
+ }
+
+ if ($val =~ /^\s*(NOT\s*)?DEFINED\s+(\S+)\s*$/) {
+ if (defined $1) {
+ return !value_defined($2);
+ } else {
+ return value_defined($2);
+ }
+ }
+
+ if ($val =~ /^\s*0\s*$/) {
+ return 0;
+ } elsif ($val =~ /^\s*\d+\s*$/) {
+ return 1;
+ }
+
+ die ("$name: $.: Undefined content $val in if statement\n");
+}
+
+sub process_if {
+ my ($name, $value) = @_;
+
+ # Convert variables and replace undefined ones with 0
+ my $val = process_variables($value, 1);
+ my $ret = process_expression $name, $val;
+
+ return $ret;
+}
+
+sub __read_config {
+ my ($config, $current_test_num) = @_;
+
+ my $in;
+ open($in, $config) || die "can't read file $config";
my $name = $config;
$name =~ s,.*/(.*),$1,;
- my $test_num = 0;
+ my $test_num = $$current_test_num;
my $default = 1;
my $repeat = 1;
my $num_tests_set = 0;
my $skip = 0;
my $rest;
+ my $line;
my $test_case = 0;
+ my $if = 0;
+ my $if_set = 0;
+ my $override = 0;
- while (<IN>) {
+ my %overrides;
+
+ while (<$in>) {
# ignore blank lines and comments
next if (/^\s*$/ || /\s*\#/);
- if (/^\s*TEST_START(.*)/) {
+ if (/^\s*(TEST_START|DEFAULTS)\b(.*)/) {
- $rest = $1;
+ my $type = $1;
+ $rest = $2;
+ $line = $2;
- if ($num_tests_set) {
- die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+ my $old_test_num;
+ my $old_repeat;
+ $override = 0;
+
+ if ($type eq "TEST_START") {
+
+ if ($num_tests_set) {
+ die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+ }
+
+ $old_test_num = $test_num;
+ $old_repeat = $repeat;
+
+ $test_num += $repeat;
+ $default = 0;
+ $repeat = 1;
+ } else {
+ $default = 1;
}
- my $old_test_num = $test_num;
- my $old_repeat = $repeat;
-
- $test_num += $repeat;
- $default = 0;
- $repeat = 1;
-
- if ($rest =~ /\s+SKIP(.*)/) {
- $rest = $1;
+ # If SKIP is anywhere in the line, the command will be skipped
+ if ($rest =~ s/\s+SKIP\b//) {
$skip = 1;
} else {
$test_case = 1;
$skip = 0;
}
- if ($rest =~ /\s+ITERATE\s+(\d+)(.*)$/) {
- $repeat = $1;
- $rest = $2;
- $repeat_tests{"$test_num"} = $repeat;
+ if ($rest =~ s/\sELSE\b//) {
+ if (!$if) {
+ die "$name: $.: ELSE found with out matching IF section\n$_";
+ }
+ $if = 0;
+
+ if ($if_set) {
+ $skip = 1;
+ } else {
+ $skip = 0;
+ }
}
- if ($rest =~ /\s+SKIP(.*)/) {
- $rest = $1;
- $skip = 1;
+ if ($rest =~ s/\sIF\s+(.*)//) {
+ if (process_if($name, $1)) {
+ $if_set = 1;
+ } else {
+ $skip = 1;
+ }
+ $if = 1;
+ } else {
+ $if = 0;
+ $if_set = 0;
}
- if ($rest !~ /^\s*$/) {
- die "$name: $.: Gargbage found after TEST_START\n$_";
+ if (!$skip) {
+ if ($type eq "TEST_START") {
+ if ($rest =~ s/\s+ITERATE\s+(\d+)//) {
+ $repeat = $1;
+ $repeat_tests{"$test_num"} = $repeat;
+ }
+ } elsif ($rest =~ s/\sOVERRIDE\b//) {
+ # DEFAULT only
+ $override = 1;
+ # Clear previous overrides
+ %overrides = ();
+ }
}
- if ($skip) {
+ if (!$skip && $rest !~ /^\s*$/) {
+ die "$name: $.: Gargbage found after $type\n$_";
+ }
+
+ if ($skip && $type eq "TEST_START") {
$test_num = $old_test_num;
$repeat = $old_repeat;
}
- } elsif (/^\s*DEFAULTS(.*)$/) {
- $default = 1;
-
+ } elsif (/^\s*ELSE\b(.*)$/) {
+ if (!$if) {
+ die "$name: $.: ELSE found with out matching IF section\n$_";
+ }
$rest = $1;
-
- if ($rest =~ /\s+SKIP(.*)/) {
- $rest = $1;
+ if ($if_set) {
$skip = 1;
+ $rest = "";
} else {
$skip = 0;
+
+ if ($rest =~ /\sIF\s+(.*)/) {
+ # May be a ELSE IF section.
+ if (!process_if($name, $1)) {
+ $skip = 1;
+ }
+ $rest = "";
+ } else {
+ $if = 0;
+ }
}
if ($rest !~ /^\s*$/) {
die "$name: $.: Gargbage found after DEFAULTS\n$_";
}
+ } elsif (/^\s*INCLUDE\s+(\S+)/) {
+
+ next if ($skip);
+
+ if (!$default) {
+ die "$name: $.: INCLUDE can only be done in default sections\n$_";
+ }
+
+ my $file = process_variables($1);
+
+ if ($file !~ m,^/,) {
+ # check the path of the config file first
+ if ($config =~ m,(.*)/,) {
+ if (-f "$1/$file") {
+ $file = "$1/$file";
+ }
+ }
+ }
+
+ if ( ! -r $file ) {
+ die "$name: $.: Can't read file $file\n$_";
+ }
+
+ if (__read_config($file, \$test_num)) {
+ $test_case = 1;
+ }
+
} elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) {
next if ($skip);
@@ -460,10 +670,10 @@
}
if ($default || $lvalue =~ /\[\d+\]$/) {
- set_value($lvalue, $rvalue);
+ set_value($lvalue, $rvalue, $override, \%overrides, $name);
} else {
my $val = "$lvalue\[$test_num\]";
- set_value($val, $rvalue);
+ set_value($val, $rvalue, $override, \%overrides, $name);
if ($repeat > 1) {
$repeats{$val} = $repeat;
@@ -490,13 +700,26 @@
}
}
- close(IN);
-
if ($test_num) {
$test_num += $repeat - 1;
$opt{"NUM_TESTS"} = $test_num;
}
+ close($in);
+
+ $$current_test_num = $test_num;
+
+ return $test_case;
+}
+
+sub read_config {
+ my ($config) = @_;
+
+ my $test_case;
+ my $test_num = 0;
+
+ $test_case = __read_config $config, \$test_num;
+
# make sure we have all mandatory configs
get_ktest_configs;
@@ -603,8 +826,20 @@
}
sub run_command;
+sub start_monitor;
+sub end_monitor;
+sub wait_for_monitor;
sub reboot {
+ my ($time) = @_;
+
+ if (defined($time)) {
+ start_monitor;
+ # flush out current monitor
+ # May contain the reboot success line
+ wait_for_monitor 1;
+ }
+
# try to reboot normally
if (run_command $reboot) {
if (defined($powercycle_after_reboot)) {
@@ -615,12 +850,17 @@
# nope? power cycle it.
run_command "$power_cycle";
}
+
+ if (defined($time)) {
+ wait_for_monitor($time, $reboot_success_line);
+ end_monitor;
+ }
}
sub do_not_reboot {
my $i = $iteration;
- return $test_type eq "build" ||
+ return $test_type eq "build" || $no_reboot ||
($test_type eq "patchcheck" && $opt{"PATCHCHECK_TYPE[$i]"} eq "build") ||
($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build");
}
@@ -693,16 +933,29 @@
}
sub wait_for_monitor {
- my ($time) = @_;
+ my ($time, $stop) = @_;
+ my $full_line = "";
my $line;
+ my $booted = 0;
doprint "** Wait for monitor to settle down **\n";
# read the monitor and wait for the system to calm down
- do {
+ while (!$booted) {
$line = wait_for_input($monitor_fp, $time);
- print "$line" if (defined($line));
- } while (defined($line));
+ last if (!defined($line));
+ print "$line";
+ $full_line .= $line;
+
+ if (defined($stop) && $full_line =~ /$stop/) {
+ doprint "wait for monitor detected $stop\n";
+ $booted = 1;
+ }
+
+ if ($line =~ /\n/) {
+ $full_line = "";
+ }
+ }
print "** Monitor flushed **\n";
}
@@ -719,10 +972,7 @@
# no need to reboot for just building.
if (!do_not_reboot) {
doprint "REBOOTING\n";
- reboot;
- start_monitor;
- wait_for_monitor $sleep_time;
- end_monitor;
+ reboot $sleep_time;
}
my $name = "";
@@ -854,9 +1104,12 @@
open(IN, "$ssh_grub |")
or die "unable to get menu.lst";
+ my $found = 0;
+
while (<IN>) {
if (/^\s*title\s+$grub_menu\s*$/) {
$grub_number++;
+ $found = 1;
last;
} elsif (/^\s*title\s/) {
$grub_number++;
@@ -865,7 +1118,7 @@
close(IN);
die "Could not find '$grub_menu' in /boot/grub/menu on $machine"
- if ($grub_number < 0);
+ if (!$found);
doprint "$grub_number\n";
}
@@ -902,7 +1155,8 @@
sub reboot_to {
if ($reboot_type eq "grub") {
- run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch && reboot)'";
+ run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'";
+ reboot;
return;
}
@@ -1083,6 +1337,8 @@
sub install {
+ return if ($no_install);
+
run_scp "$outputdir/$build_target", "$target_image" or
dodie "failed to copy image";
@@ -1140,6 +1396,11 @@
}
sub start_monitor_and_boot {
+ # Make sure the stable kernel has finished booting
+ start_monitor;
+ wait_for_monitor 5;
+ end_monitor;
+
get_grub_index;
get_version;
install;
@@ -1250,6 +1511,10 @@
unlink $buildlog;
+ # Failed builds should not reboot the target
+ my $save_no_reboot = $no_reboot;
+ $no_reboot = 1;
+
if (defined($pre_build)) {
my $ret = run_command $pre_build;
if (!$ret && defined($pre_build_die) &&
@@ -1272,16 +1537,16 @@
# allow for empty configs
run_command "touch $output_config";
- run_command "mv $output_config $outputdir/config_temp" or
- dodie "moving .config";
+ if (!$noclean) {
+ run_command "mv $output_config $outputdir/config_temp" or
+ dodie "moving .config";
- if (!$noclean && !run_command "$make mrproper") {
- dodie "make mrproper";
+ run_command "$make mrproper" or dodie "make mrproper";
+
+ run_command "mv $outputdir/config_temp $output_config" or
+ dodie "moving config_temp";
}
- run_command "mv $outputdir/config_temp $output_config" or
- dodie "moving config_temp";
-
} elsif (!$noclean) {
unlink "$output_config";
run_command "$make mrproper" or
@@ -1318,10 +1583,15 @@
if (!$build_ret) {
# bisect may need this to pass
- return 0 if ($in_bisect);
+ if ($in_bisect) {
+ $no_reboot = $save_no_reboot;
+ return 0;
+ }
fail "failed build" and return 0;
}
+ $no_reboot = $save_no_reboot;
+
return 1;
}
@@ -1356,10 +1626,7 @@
if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) {
doprint "Reboot and wait $sleep_time seconds\n";
- reboot;
- start_monitor;
- wait_for_monitor $sleep_time;
- end_monitor;
+ reboot $sleep_time;
}
}
@@ -1500,10 +1767,7 @@
sub bisect_reboot {
doprint "Reboot and sleep $bisect_sleep_time seconds\n";
- reboot;
- start_monitor;
- wait_for_monitor $bisect_sleep_time;
- end_monitor;
+ reboot $bisect_sleep_time;
}
# returns 1 on success, 0 on failure, -1 on skip
@@ -2066,10 +2330,7 @@
sub patchcheck_reboot {
doprint "Reboot and sleep $patchcheck_sleep_time seconds\n";
- reboot;
- start_monitor;
- wait_for_monitor $patchcheck_sleep_time;
- end_monitor;
+ reboot $patchcheck_sleep_time;
}
sub patchcheck {
@@ -2178,12 +2439,31 @@
}
my %depends;
+my %depcount;
my $iflevel = 0;
my @ifdeps;
# prevent recursion
my %read_kconfigs;
+sub add_dep {
+ # $config depends on $dep
+ my ($config, $dep) = @_;
+
+ if (defined($depends{$config})) {
+ $depends{$config} .= " " . $dep;
+ } else {
+ $depends{$config} = $dep;
+ }
+
+ # record the number of configs depending on $dep
+ if (defined $depcount{$dep}) {
+ $depcount{$dep}++;
+ } else {
+ $depcount{$dep} = 1;
+ }
+}
+
# taken from streamline_config.pl
sub read_kconfig {
my ($kconfig) = @_;
@@ -2230,30 +2510,19 @@
$config = $2;
for (my $i = 0; $i < $iflevel; $i++) {
- if ($i) {
- $depends{$config} .= " " . $ifdeps[$i];
- } else {
- $depends{$config} = $ifdeps[$i];
- }
- $state = "DEP";
+ add_dep $config, $ifdeps[$i];
}
# collect the depends for the config
} elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
- if (defined($depends{$1})) {
- $depends{$config} .= " " . $1;
- } else {
- $depends{$config} = $1;
- }
+ add_dep $config, $1;
# Get the configs that select this config
- } elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) {
- if (defined($depends{$1})) {
- $depends{$1} .= " " . $config;
- } else {
- $depends{$1} = $config;
- }
+ } elsif ($state eq "NEW" && /^\s*select\s+(\S+)/) {
+
+ # selected by depends on config
+ add_dep $1, $config;
# Check for if statements
} elsif (/^if\s+(.*\S)\s*$/) {
@@ -2365,11 +2634,18 @@
close OUT;
}
+sub chomp_config {
+ my ($config) = @_;
+
+ $config =~ s/CONFIG_//;
+
+ return $config;
+}
+
sub get_depends {
my ($dep) = @_;
- my $kconfig = $dep;
- $kconfig =~ s/CONFIG_//;
+ my $kconfig = chomp_config $dep;
$dep = $depends{"$kconfig"};
@@ -2419,8 +2695,7 @@
return undef;
}
- my $kconfig = $config;
- $kconfig =~ s/CONFIG_//;
+ my $kconfig = chomp_config $config;
# Test dependencies first
if (defined($depends{"$kconfig"})) {
@@ -2510,6 +2785,14 @@
my @config_keys = keys %min_configs;
+ # All configs need a depcount
+ foreach my $config (@config_keys) {
+ my $kconfig = chomp_config $config;
+ if (!defined $depcount{$kconfig}) {
+ $depcount{$kconfig} = 0;
+ }
+ }
+
# Remove anything that was set by the make allnoconfig
# we shouldn't need them as they get set for us anyway.
foreach my $config (@config_keys) {
@@ -2548,8 +2831,13 @@
# Now disable each config one by one and do a make oldconfig
# till we find a config that changes our list.
- # Put configs that did not modify the config at the end.
my @test_configs = keys %min_configs;
+
+ # Sort keys by who is most dependent on
+ @test_configs = sort { $depcount{chomp_config($b)} <=> $depcount{chomp_config($a)} }
+ @test_configs ;
+
+ # Put configs that did not modify the config at the end.
my $reset = 1;
for (my $i = 0; $i < $#test_configs; $i++) {
if (!defined($nochange_config{$test_configs[0]})) {
@@ -2659,10 +2947,7 @@
}
doprint "Reboot and wait $sleep_time seconds\n";
- reboot;
- start_monitor;
- wait_for_monitor $sleep_time;
- end_monitor;
+ reboot $sleep_time;
}
success $i;
@@ -2783,6 +3068,9 @@
# First we need to do is the builds
for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
+ # Do not reboot on failing test options
+ $no_reboot = 1;
+
$iteration = $i;
my $makecmd = set_test_option("MAKE_CMD", $i);
@@ -2811,6 +3099,7 @@
$reboot_type = set_test_option("REBOOT_TYPE", $i);
$grub_menu = set_test_option("GRUB_MENU", $i);
$post_install = set_test_option("POST_INSTALL", $i);
+ $no_install = set_test_option("NO_INSTALL", $i);
$reboot_script = set_test_option("REBOOT_SCRIPT", $i);
$reboot_on_error = set_test_option("REBOOT_ON_ERROR", $i);
$poweroff_on_error = set_test_option("POWEROFF_ON_ERROR", $i);
@@ -2832,6 +3121,7 @@
$console = set_test_option("CONSOLE", $i);
$detect_triplefault = set_test_option("DETECT_TRIPLE_FAULT", $i);
$success_line = set_test_option("SUCCESS_LINE", $i);
+ $reboot_success_line = set_test_option("REBOOT_SUCCESS_LINE", $i);
$stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i);
$stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i);
$stop_test_after = set_test_option("STOP_TEST_AFTER", $i);
@@ -2850,9 +3140,11 @@
chdir $builddir || die "can't change directory to $builddir";
- if (!-d $tmpdir) {
- mkpath($tmpdir) or
- die "can't create $tmpdir";
+ foreach my $dir ($tmpdir, $outputdir) {
+ if (!-d $dir) {
+ mkpath($dir) or
+ die "can't create $dir";
+ }
}
$ENV{"SSH_USER"} = $ssh_user;
@@ -2889,8 +3181,11 @@
$run_type = "ERROR";
}
+ my $installme = "";
+ $installme = " no_install" if ($no_install);
+
doprint "\n\n";
- doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type\n\n";
+ doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type$installme\n\n";
unlink $dmesg;
unlink $buildlog;
@@ -2911,6 +3206,9 @@
die "failed to checkout $checkout";
}
+ $no_reboot = 0;
+
+
if ($test_type eq "bisect") {
bisect $i;
next;
@@ -2929,6 +3227,13 @@
build $build_type or next;
}
+ if ($test_type eq "install") {
+ get_version;
+ install;
+ success $i;
+ next;
+ }
+
if ($test_type ne "build") {
my $failed = 0;
start_monitor_and_boot or $failed = 1;
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
index b8bcd14..dbedfa1 100644
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -72,6 +72,128 @@
# the same option name under the same test or as default
# ktest will fail to execute, and no tests will run.
#
+# DEFAULTS OVERRIDE
+#
+# Options defined in the DEFAULTS section can not be duplicated
+# even if they are defined in two different DEFAULT sections.
+# This is done to catch mistakes where an option is added but
+# the previous option was forgotten about and not commented.
+#
+# The OVERRIDE keyword can be added to a section to allow this
+# section to override other DEFAULT sections values that have
+# been defined previously. It will only override options that
+# have been defined before its use. Options defined later
+# in a non override section will still error. The same option
+# can not be defined in the same section even if that section
+# is marked OVERRIDE.
+#
+#
+#
+# Both TEST_START and DEFAULTS sections can also have the IF keyword
+# The value after the IF must evaluate into a 0 or non 0 positive
+# integer, and can use the config variables (explained below).
+#
+# DEFAULTS IF ${IS_X86_32}
+#
+# The above will process the DEFAULTS section if the config
+# variable IS_X86_32 evaluates to a non zero positive integer
+# otherwise if it evaluates to zero, it will act the same
+# as if the SKIP keyword was used.
+#
+# The ELSE keyword can be used directly after a section with
+# a IF statement.
+#
+# TEST_START IF ${RUN_NET_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# ELSE
+#
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-normal
+#
+#
+# The ELSE keyword can also contain an IF statement to allow multiple
+# if then else sections. But all the sections must be either
+# DEFAULT or TEST_START, they can not be a mixture.
+#
+# TEST_START IF ${RUN_NET_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# ELSE IF ${RUN_DISK_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-tests
+#
+# ELSE IF ${RUN_CPU_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-cpu
+#
+# ELSE
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# The if statement may also have comparisons that will and for
+# == and !=, strings may be used for both sides.
+#
+# BOX_TYPE := x86_32
+#
+# DEFAULTS IF ${BOX_TYPE} == x86_32
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-32
+# ELSE
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-64
+#
+# The DEFINED keyword can be used by the IF statements too.
+# It returns true if the given config variable or option has been defined
+# or false otherwise.
+#
+#
+# DEFAULTS IF DEFINED USE_CC
+# CC := ${USE_CC}
+# ELSE
+# CC := gcc
+#
+#
+# As well as NOT DEFINED.
+#
+# DEFAULTS IF NOT DEFINED MAKE_CMD
+# MAKE_CMD := make ARCH=x86
+#
+#
+# And/or ops (&&,||) may also be used to make complex conditionals.
+#
+# TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf
+#
+# Notice the use of paranthesis. Without any paranthesis the above would be
+# processed the same as:
+#
+# TEST_START IF DEFINED ALL_TESTS || (${MYTEST} == boottest && ${MACHINE} == gandalf)
+#
+#
+#
+# INCLUDE file
+#
+# The INCLUDE keyword may be used in DEFAULT sections. This will
+# read another config file and process that file as well. The included
+# file can include other files, add new test cases or default
+# statements. Config variables will be passed to these files and changes
+# to config variables will be seen by top level config files. Including
+# a file is processed just like the contents of the file was cut and pasted
+# into the top level file, except, that include files that end with
+# TEST_START sections will have that section ended at the end of
+# the include file. That is, an included file is included followed
+# by another DEFAULT keyword.
+#
+# Unlike other files referenced in this config, the file path does not need
+# to be absolute. If the file does not start with '/', then the directory
+# that the current config file was located in is used. If no config by the
+# given name is found there, then the current directory is searched.
+#
+# INCLUDE myfile
+# DEFAULT
+#
+# is the same as:
+#
+# INCLUDE myfile
+#
+# Note, if the include file does not contain a full path, the file is
+# searched first by the location of the original include file, and then
+# by the location that ktest.pl was executed in.
+#
#### Config variables ####
#
@@ -253,9 +375,10 @@
# The default test type (default test)
# The test types may be:
-# build - only build the kernel, do nothing else
-# boot - build and boot the kernel
-# test - build, boot and if TEST is set, run the test script
+# build - only build the kernel, do nothing else
+# install - build and install, but do nothing else (does not reboot)
+# boot - build, install, and boot the kernel
+# test - build, boot and if TEST is set, run the test script
# (If TEST is not set, it defaults back to boot)
# bisect - Perform a bisect on the kernel (see BISECT_TYPE below)
# patchcheck - Do a test on a series of commits in git (see PATCHCHECK below)
@@ -293,6 +416,13 @@
# or on some systems:
#POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION
+# If for some reason you just want to boot the kernel and you do not
+# want the test to install anything new. For example, you may just want
+# to boot test the same kernel over and over and do not want to go through
+# the hassle of installing anything, you can set this option to 1
+# (default 0)
+#NO_INSTALL = 1
+
# If there is a script that you require to run before the build is done
# you can specify it with PRE_BUILD.
#
@@ -415,6 +545,14 @@
# (default "login:")
#SUCCESS_LINE = login:
+# To speed up between reboots, defining a line that the
+# default kernel produces that represents that the default
+# kernel has successfully booted and can be used to pass
+# a new test kernel to it. Otherwise ktest.pl will wait till
+# SLEEP_TIME to continue.
+# (default undefined)
+#REBOOT_SUCCESS_LINE = login:
+
# In case the console constantly fills the screen, having
# a specified time to stop the test after success is recommended.
# (in seconds)
@@ -480,6 +618,8 @@
# another test. If a reboot to the reliable kernel happens,
# we wait SLEEP_TIME for the console to stop producing output
# before starting the next test.
+#
+# You can speed up reboot times even more by setting REBOOT_SUCCESS_LINE.
# (default 60)
#SLEEP_TIME = 60