Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/arnd/cell-2.6 into merge
diff --git a/Documentation/debugging-via-ohci1394.txt b/Documentation/debugging-via-ohci1394.txt
index de4804e..c360d4e 100644
--- a/Documentation/debugging-via-ohci1394.txt
+++ b/Documentation/debugging-via-ohci1394.txt
@@ -36,14 +36,15 @@
Drivers
-------
-The OHCI-1394 drivers in drivers/firewire and drivers/ieee1394 initialize
-the OHCI-1394 controllers to a working state and can be used to enable
-physical DMA. By default you only have to load the driver, and physical
-DMA access will be granted to all remote nodes, but it can be turned off
-when using the ohci1394 driver.
+The ohci1394 driver in drivers/ieee1394 initializes the OHCI-1394 controllers
+to a working state and enables physical DMA by default for all remote nodes.
+This can be turned off by ohci1394's module parameter phys_dma=0.
-Because these drivers depend on the PCI enumeration to be completed, an
-initialization routine which can runs pretty early (long before console_init(),
+The alternative firewire-ohci driver in drivers/firewire uses filtered physical
+DMA, hence is not yet suitable for remote debugging.
+
+Because ohci1394 depends on the PCI enumeration to be completed, an
+initialization routine which runs pretty early (long before console_init()
which makes the printk buffer appear on the console can be called) was written.
To activate it, enable CONFIG_PROVIDE_OHCI1394_DMA_INIT (Kernel hacking menu:
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 4d3aa51..c1d1fd0 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -172,6 +172,16 @@
---------------------------
+What: ide-tape driver
+When: July 2008
+Files: drivers/ide/ide-tape.c
+Why: This driver might not have any users anymore and maintaining it for no
+ reason is an effort no one wants to make.
+Who: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>, Borislav Petkov
+ <petkovbb@googlemail.com>
+
+---------------------------
+
What: libata spindown skipping and warning
When: Dec 2008
Why: Some halt(8) implementations synchronize caches for and spin
@@ -306,3 +316,15 @@
is largely pointless as without a lot of work only the most
trivial of Solaris binaries can work with the emulation code.
Who: David S. Miller <davem@davemloft.net>
+
+---------------------------
+
+What: init_mm export
+When: 2.6.26
+Why: Not used in-tree. The current out-of-tree users used it to
+ work around problems in the CPA code which should be resolved
+ by now. One usecase was described to provide verification code
+ of the CPA operation. That's a good idea in general, but such
+ code / infrastructure should be in the kernel and not in some
+ out-of-tree driver.
+Who: Thomas Gleixner <tglx@linutronix.de>
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 3bd9583..c31e029 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -12,8 +12,9 @@
* Intel 82801G (ICH7)
* Intel 631xESB/632xESB (ESB2)
* Intel 82801H (ICH8)
- * Intel ICH9
+ * Intel 82801I (ICH9)
* Intel Tolapai
+ * Intel ICH10
Datasheets: Publicly available at the Intel website
Authors:
diff --git a/Documentation/ide.txt b/Documentation/ide.txt
index 94e2e3b..bcd7cd1 100644
--- a/Documentation/ide.txt
+++ b/Documentation/ide.txt
@@ -258,8 +258,6 @@
As for VLB, it is safest to not specify it.
Bigger values are safer than smaller ones.
- "idex=noprobe" : do not attempt to access/use this interface
-
"idex=base" : probe for an interface at the addr specified,
where "base" is usually 0x1f0 or 0x170
and "ctl" is assumed to be "base"+0x206
@@ -309,53 +307,6 @@
================================================================================
-IDE ATAPI streaming tape driver
--------------------------------
-
-This driver is a part of the Linux ide driver and works in co-operation
-with linux/drivers/block/ide.c.
-
-The driver, in co-operation with ide.c, basically traverses the
-request-list for the block device interface. The character device
-interface, on the other hand, creates new requests, adds them
-to the request-list of the block device, and waits for their completion.
-
-Pipelined operation mode is now supported on both reads and writes.
-
-The block device major and minor numbers are determined from the
-tape's relative position in the ide interfaces, as explained in ide.c.
-
-The character device interface consists of the following devices:
-
- ht0 major 37, minor 0 first IDE tape, rewind on close.
- ht1 major 37, minor 1 second IDE tape, rewind on close.
- ...
- nht0 major 37, minor 128 first IDE tape, no rewind on close.
- nht1 major 37, minor 129 second IDE tape, no rewind on close.
- ...
-
-Run /dev/MAKEDEV to create the above entries.
-
-The general magnetic tape commands compatible interface, as defined by
-include/linux/mtio.h, is accessible through the character device.
-
-General ide driver configuration options, such as the interrupt-unmask
-flag, can be configured by issuing an ioctl to the block device interface,
-as any other ide device.
-
-Our own ide-tape ioctl's can be issued to either the block device or
-the character device interface.
-
-Maximal throughput with minimal bus load will usually be achieved in the
-following scenario:
-
- 1. ide-tape is operating in the pipelined operation mode.
- 2. No buffering is performed by the user backup program.
-
-
-
-================================================================================
-
Some Terminology
----------------
IDE = Integrated Drive Electronics, meaning that each drive has a built-in
diff --git a/MAINTAINERS b/MAINTAINERS
index 36c7bc6..fed09b5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -767,14 +767,14 @@
BLACKFIN ARCHITECTURE
P: Bryan Wu
-M: bryan.wu@analog.com
+M: cooloney@kernel.org
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
W: http://blackfin.uclinux.org
S: Supported
BLACKFIN EMAC DRIVER
P: Bryan Wu
-M: bryan.wu@analog.com
+M: cooloney@kernel.org
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
W: http://blackfin.uclinux.org
S: Supported
@@ -982,6 +982,12 @@
L: netdev@vger.kernel.org
S: Supported
+BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
+P: Eliezer Tamir
+M: eliezert@broadcom.com
+L: netdev@vger.kernel.org
+S: Supported
+
BROADCOM TG3 GIGABIT ETHERNET DRIVER
P: Michael Chan
M: mchan@broadcom.com
@@ -2744,6 +2750,8 @@
NETEFFECT IWARP RNIC DRIVER (IW_NES)
P: Faisal Latif
M: flatif@neteffect.com
+P: Nishi Gupta
+M: ngupta@neteffect.com
P: Glenn Streiff
M: gstreiff@neteffect.com
L: general@lists.openfabrics.org
@@ -3884,10 +3892,13 @@
L: linux-kernel@vger.kernel.org
S: Maintained
-TULIP NETWORK DRIVER
-L: tulip-users@lists.sourceforge.net
-W: http://sourceforge.net/projects/tulip/
-S: Orphan
+TULIP NETWORK DRIVERS
+P: Grant Grundler
+M: grundler@parisc-linux.org
+P: Kyle McMartin
+M: kyle@parisc-linux.org
+L: netdev@vger.kernel.org
+S: Maintained
TUN/TAP driver
P: Maxim Krasnyansky
diff --git a/Makefile b/Makefile
index 99300dc..a229784 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 25
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
NAME = Funky Weasel is Jiggy wit it
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9619c43..16b82e1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -939,7 +939,8 @@
config ATAGS_PROC
bool "Export atags in procfs"
- default n
+ depends on KEXEC
+ default y
help
Should the atags used to boot the kernel be exported in an "atags"
file in procfs. Useful with kexec.
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 1c7f09a..e473fa6 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -61,6 +61,7 @@
data[0] = regoffset; /* register num */
data[1] = value; /* register data */
err = i2c_transfer(adap, msg, 1);
+ i2c_put_adapter(adap);
if (err >= 0)
return 0;
return err;
@@ -91,6 +92,7 @@
msg->buf = data;
err = i2c_transfer(adap, msg, 1);
*value = data[0];
+ i2c_put_adapter(adap);
if (err >= 0)
return 0;
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c
index 939a386..4b21479 100644
--- a/arch/arm/mach-pxa/cpu-pxa.c
+++ b/arch/arm/mach-pxa/cpu-pxa.c
@@ -43,7 +43,7 @@
#ifdef DEBUG
static unsigned int freq_debug;
-MODULE_PARM(freq_debug, "i");
+module_param(freq_debug, uint, 0);
MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
#else
#define freq_debug 0
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 7cd9ef8..35f25fd 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -129,28 +129,20 @@
{
unsigned long mask = 1ul << (clk->cken & 0x1f);
- local_irq_disable();
-
if (clk->cken < 32)
CKENA |= mask;
else
CKENB |= mask;
-
- local_irq_enable();
}
static void clk_pxa3xx_cken_disable(struct clk *clk)
{
unsigned long mask = 1ul << (clk->cken & 0x1f);
- local_irq_disable();
-
if (clk->cken < 32)
CKENA &= ~mask;
else
CKENB &= ~mask;
-
- local_irq_enable();
}
static const struct clkops clk_pxa3xx_cken_ops = {
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 7731d50..afd2cbf 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -58,7 +58,7 @@
.resource = smc91x_resources,
};
-#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULES)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static void zylonite_backlight_power(int on)
{
gpio_set_value(gpio_backlight, on);
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 2728b0e..3f6dc40 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -120,6 +120,8 @@
*/
int valid_phys_addr_range(unsigned long addr, size_t size)
{
+ if (addr < PHYS_OFFSET)
+ return 0;
if (addr + size > __pa(high_memory))
return 0;
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index 5a77030..e765a86 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -129,7 +129,7 @@
#ifdef CONFIG_BOARD_ATSTK100X_SPI1
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
-#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
at32_add_device_mci(0);
#endif
at32_add_device_lcdc(0, &atstk1000_lcdc_data,
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index eaaa69b..7f4af0b 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -11,6 +11,7 @@
#include <linux/fs.h>
#include <linux/ptrace.h>
#include <linux/reboot.h>
+#include <linux/tick.h>
#include <linux/uaccess.h>
#include <linux/unistd.h>
@@ -30,8 +31,10 @@
{
/* endless idle loop with no priority at all */
while (1) {
+ tick_nohz_stop_sched_tick();
while (!need_resched())
cpu_idle_sleep();
+ tick_nohz_restart_sched_tick();
preempt_enable_no_resched();
schedule();
preempt_disable();
@@ -345,6 +348,7 @@
p->thread.cpu_context.ksp = (unsigned long)childregs;
p->thread.cpu_context.pc = (unsigned long)ret_from_fork;
+ clear_tsk_thread_flag(p, TIF_DEBUG);
if ((clone_flags & CLONE_PTRACE) && test_thread_flag(TIF_DEBUG))
ocd_enable(p);
diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c
index 6560cb1..ce4e429 100644
--- a/arch/avr32/mm/fault.c
+++ b/arch/avr32/mm/fault.c
@@ -189,6 +189,8 @@
page = sysreg_read(PTBR);
printk(KERN_ALERT "ptbr = %08lx", page);
+ if (address >= TASK_SIZE)
+ page = (unsigned long)swapper_pg_dir;
if (page) {
page = ((unsigned long *)page)[address >> 22];
printk(" pgd = %08lx", page);
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index fe254f8..75eba2c 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -98,8 +98,11 @@
# them changed. We use .mach to indicate when they were updated
# last, otherwise make uses the target directory mtime.
+ show_mach_symlink = :
+ quiet_show_mach_symlink = echo ' SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach'
+silent_show_mach_symlink = :
include/asm-blackfin/.mach: $(wildcard include/config/arch/*.h) include/config/auto.conf
- @echo ' SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach'
+ @$($(quiet)show_mach_symlink)
ifneq ($(KBUILD_SRC),)
$(Q)mkdir -p include/asm-$(ARCH)
$(Q)ln -fsn $(srctree)/include/asm-$(ARCH)/mach-$(MACHINE) include/asm-$(ARCH)/mach
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index d59ee15..ae320dc 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,7 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.14
-# Thu Nov 29 17:32:47 2007
+# Linux kernel version: 2.6.22.16
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -116,7 +115,10 @@
# Processor and Board Settings
#
# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
CONFIG_BF527=y
# CONFIG_BF531 is not set
# CONFIG_BF532 is not set
@@ -306,6 +308,7 @@
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_L1_MAX_PIECE=16
+# CONFIG_MPU is not set
#
# Asynchonous Memory Configuration
@@ -354,6 +357,7 @@
# Power management options
#
# CONFIG_PM is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# Networking
@@ -496,7 +500,6 @@
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_MW320D=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
@@ -506,9 +509,6 @@
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BF5xx=m
-CONFIG_BFIN_FLASH_SIZE=0x400000
-CONFIG_EBIU_FLASH_BASE=0x20000000
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
@@ -684,7 +684,6 @@
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set
-# CONFIG_BF53X_PFBUTTONS is not set
# CONFIG_TWI_KEYPAD is not set
#
@@ -702,12 +701,12 @@
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
# CONFIG_BFIN_SPORT is not set
# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_TWI_LCD is not set
# CONFIG_AD5304 is not set
-# CONFIG_BF5xx_TEA5764 is not set
-# CONFIG_BF5xx_FBDMA is not set
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
@@ -772,7 +771,6 @@
#
# I2C Hardware Bus support
#
-# CONFIG_I2C_BLACKFIN_GPIO is not set
CONFIG_I2C_BLACKFIN_TWI=m
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
# CONFIG_I2C_GPIO is not set
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 811711f..9621caa 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -322,10 +322,9 @@
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
+CONFIG_PM_BFIN_SLEEP_DEEPER=y
+# CONFIG_PM_BFIN_SLEEP is not set
# CONFIG_PM_WAKEUP_BY_GPIO is not set
-# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x80
#
# CPU Frequency scaling
@@ -697,7 +696,6 @@
# CONFIG_SERIAL_BFIN_PIO is not set
CONFIG_SERIAL_BFIN_UART0=y
# CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_BFIN_SPORT is not set
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 198f412..b51e76c 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -323,10 +323,9 @@
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
+CONFIG_PM_BFIN_SLEEP_DEEPER=y
+# CONFIG_PM_BFIN_SLEEP is not set
# CONFIG_PM_WAKEUP_BY_GPIO is not set
-# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x80
#
# CPU Frequency scaling
@@ -714,7 +713,6 @@
# CONFIG_SERIAL_BFIN_PIO is not set
CONFIG_SERIAL_BFIN_UART0=y
# CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_BFIN_SPORT is not set
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index b37ccc6..d45fa53 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -330,10 +330,9 @@
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
+CONFIG_PM_BFIN_SLEEP_DEEPER=y
+# CONFIG_PM_BFIN_SLEEP is not set
# CONFIG_PM_WAKEUP_BY_GPIO is not set
-# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x8
#
# CPU Frequency scaling
@@ -1013,6 +1012,7 @@
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC=m
CONFIG_SND_BF5XX_SOC=m
+CONFIG_SND_MMAP_SUPPORT=y
CONFIG_SND_BF5XX_SOC_AC97=m
# CONFIG_SND_BF5XX_SOC_WM8750 is not set
# CONFIG_SND_BF5XX_SOC_WM8731 is not set
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index fd70216..c9707f7 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -396,6 +396,7 @@
# Power management options
#
# CONFIG_PM is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
@@ -1075,6 +1076,7 @@
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC=y
CONFIG_SND_BF5XX_SOC=y
+CONFIG_SND_MMAP_SUPPORT=y
CONFIG_SND_BF5XX_SOC_AC97=y
CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
# CONFIG_SND_BF5XX_SOC_WM8750 is not set
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 8546994..4d8a633 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -367,6 +367,7 @@
# Power management options
#
# CONFIG_PM is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# Networking
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 5453bc3..8fd5d22 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -105,13 +105,14 @@
mutex_unlock(&(dma_ch[channel].dmalock));
#ifdef CONFIG_BF54x
- if (channel >= CH_UART2_RX && channel <= CH_UART3_TX &&
- strncmp(device_id, "BFIN_UART", 9) == 0)
- dma_ch[channel].regs->peripheral_map |=
- (channel - CH_UART2_RX + 0xC);
- else
- dma_ch[channel].regs->peripheral_map |=
- (channel - CH_UART2_RX + 0x6);
+ if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) {
+ if (strncmp(device_id, "BFIN_UART", 9) == 0)
+ dma_ch[channel].regs->peripheral_map |=
+ (channel - CH_UART2_RX + 0xC);
+ else
+ dma_ch[channel].regs->peripheral_map |=
+ (channel - CH_UART2_RX + 0x6);
+ }
#endif
dma_ch[channel].device_id = device_id;
diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c
index 5cf4bdb..1904d8b 100644
--- a/arch/blackfin/kernel/gptimers.c
+++ b/arch/blackfin/kernel/gptimers.c
@@ -1,9 +1,9 @@
/*
- * bfin_gptimers.c - derived from bf53x_timers.c
- * Driver for General Purpose Timer functions on the Blackfin processor
+ * gptimers.c - Blackfin General Purpose Timer core API
*
- * Copyright (C) 2005 John DeHority
- * Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de)
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ * Copyright (C) 2005 John DeHority
+ * Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de)
*
* Licensed under the GPLv2.
*/
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 8229b10..2255c28 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -32,6 +32,7 @@
static DEFINE_PER_CPU(struct cpu, cpu_devices);
u16 _bfin_swrst;
+EXPORT_SYMBOL(_bfin_swrst);
unsigned long memory_start, memory_end, physical_mem_end;
unsigned long reserved_mem_dcache_on;
@@ -514,6 +515,7 @@
printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
printk(KERN_INFO "Memory map:\n"
+ KERN_INFO " fixedcode = 0x%p-0x%p\n"
KERN_INFO " text = 0x%p-0x%p\n"
KERN_INFO " rodata = 0x%p-0x%p\n"
KERN_INFO " bss = 0x%p-0x%p\n"
@@ -527,7 +529,8 @@
#if DMA_UNCACHED_REGION > 0
KERN_INFO " DMA Zone = 0x%p-0x%p\n"
#endif
- , _stext, _etext,
+ , (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
+ _stext, _etext,
__start_rodata, __end_rodata,
__bss_start, __bss_stop,
_sdata, _edata,
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index aed8325..cb01a9d 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -147,44 +147,64 @@
__l1_lma_start = .;
+#if L1_CODE_LENGTH
+# define LDS_L1_CODE *(.l1.text)
+#else
+# define LDS_L1_CODE
+#endif
.text_l1 L1_CODE_START : AT(LOADADDR(.init.ramfs) + SIZEOF(.init.ramfs))
{
. = ALIGN(4);
__stext_l1 = .;
- *(.l1.text)
-
+ LDS_L1_CODE
. = ALIGN(4);
__etext_l1 = .;
}
+#if L1_DATA_A_LENGTH
+# define LDS_L1_A_DATA *(.l1.data)
+# define LDS_L1_A_BSS *(.l1.bss)
+# define LDS_L1_A_CACHE *(.data_l1.cacheline_aligned)
+#else
+# define LDS_L1_A_DATA
+# define LDS_L1_A_BSS
+# define LDS_L1_A_CACHE
+#endif
.data_l1 L1_DATA_A_START : AT(LOADADDR(.text_l1) + SIZEOF(.text_l1))
{
. = ALIGN(4);
__sdata_l1 = .;
- *(.l1.data)
+ LDS_L1_A_DATA
__edata_l1 = .;
. = ALIGN(4);
__sbss_l1 = .;
- *(.l1.bss)
+ LDS_L1_A_BSS
. = ALIGN(32);
- *(.data_l1.cacheline_aligned)
+ LDS_L1_A_CACHE
. = ALIGN(4);
__ebss_l1 = .;
}
+#if L1_DATA_B_LENGTH
+# define LDS_L1_B_DATA *(.l1.data.B)
+# define LDS_L1_B_BSS *(.l1.bss.B)
+#else
+# define LDS_L1_B_DATA
+# define LDS_L1_B_BSS
+#endif
.data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1))
{
. = ALIGN(4);
__sdata_b_l1 = .;
- *(.l1.data.B)
+ LDS_L1_B_DATA
__edata_b_l1 = .;
. = ALIGN(4);
__sbss_b_l1 = .;
- *(.l1.bss.B)
+ LDS_L1_B_BSS
. = ALIGN(4);
__ebss_b_l1 = .;
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 337515f..cf4bc0d 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -180,8 +180,8 @@
},
{
.name = "File System",
- .offset = 4 * SIZE_1M,
- .size = (256 - 4) * SIZE_1M,
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
},
};
@@ -422,11 +422,11 @@
}, {
.name = "kernel",
.size = 0xe0000,
- .offset = 0x20000
+ .offset = MTDPART_OFS_APPEND,
}, {
.name = "file system",
- .size = 0x700000,
- .offset = 0x00100000,
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
}
};
@@ -484,13 +484,6 @@
};
#endif
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-static struct bfin5xx_spi_chip ad5304_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
-};
-#endif
-
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
.enable_dma = 0,
@@ -611,17 +604,6 @@
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
- {
- .modalias = "ad5304_spi",
- .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 2,
- .platform_data = NULL,
- .controller_data = &ad5304_chip_info,
- .mode = SPI_MODE_2,
- },
-#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
{
.modalias = "ad7877",
@@ -818,6 +800,19 @@
};
#endif
+static struct resource bfin_gpios_resources = {
+ .start = 0,
+ .end = MAX_BLACKFIN_GPIOS - 1,
+ .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+ .name = "simple-gpio",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &bfin_gpios_resources,
+};
+
static struct platform_device *stamp_devices[] __initdata = {
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
&bf5xx_nand_device,
@@ -895,6 +890,8 @@
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
&bfin_device_gpiokeys,
#endif
+
+ &bfin_gpios_device,
};
static int __init stamp_init(void)
@@ -921,13 +918,18 @@
bfin_gpio_reset_spi0_ssel1();
}
-/*
- * Currently the MAC address is saved in Flash by U-Boot
- */
-#define FLASH_MAC 0x203f0000
void bfin_get_ether_addr(char *addr)
{
- *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
- *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
+ /* the MAC is stored in OTP memory page 0xDF */
+ u32 ret;
+ u64 otp_mac;
+ u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
+
+ ret = otp_read(0xDF, 0x00, &otp_mac);
+ if (!(ret & 0x1)) {
+ char *otp_mac_p = (char *)&otp_mac;
+ for (ret = 0; ret < 6; ++ret)
+ addr[ret] = otp_mac_p[5 - ret];
+ }
}
EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 2b09aa3..241b5a2 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -99,11 +99,11 @@
}, {
.name = "kernel",
.size = 0xe0000,
- .offset = 0x20000
+ .offset = MTDPART_OFS_APPEND,
}, {
.name = "file system",
- .size = 0x700000,
- .offset = 0x00100000,
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
}
};
@@ -298,6 +298,19 @@
};
#endif
+static struct resource bfin_gpios_resources = {
+ .start = 0,
+ .end = MAX_BLACKFIN_GPIOS - 1,
+ .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+ .name = "simple-gpio",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &bfin_gpios_resources,
+};
+
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
#include <linux/i2c-gpio.h>
@@ -350,6 +363,8 @@
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
&i2c_gpio_device,
#endif
+
+ &bfin_gpios_device,
};
static int __init ezkit_init(void)
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index a645f6f..b2ac481 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -112,7 +112,7 @@
static struct mtd_partition stamp_partitions[] = {
{
.name = "Bootloader",
- .size = 0x20000,
+ .size = 0x40000,
.offset = 0,
}, {
.name = "Kernel",
@@ -160,17 +160,17 @@
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader",
- .size = 0x00020000,
+ .size = 0x00040000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
.name = "kernel",
.size = 0xe0000,
- .offset = 0x20000
+ .offset = MTDPART_OFS_APPEND,
}, {
.name = "file system",
- .size = 0x700000,
- .offset = 0x00100000,
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
}
};
@@ -212,13 +212,6 @@
};
#endif
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-static struct bfin5xx_spi_chip ad5304_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
-};
-#endif
-
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
@@ -308,17 +301,6 @@
},
#endif
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
- {
- .modalias = "ad5304_spi",
- .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 2,
- .platform_data = NULL,
- .controller_data = &ad5304_chip_info,
- .mode = SPI_MODE_2,
- },
-#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
{
.modalias = "spidev",
@@ -457,6 +439,19 @@
};
#endif
+static struct resource bfin_gpios_resources = {
+ .start = 0,
+ .end = MAX_BLACKFIN_GPIOS - 1,
+ .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+ .name = "simple-gpio",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &bfin_gpios_resources,
+};
+
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
#include <linux/i2c-gpio.h>
@@ -518,6 +513,8 @@
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
&i2c_gpio_device,
#endif
+
+ &bfin_gpios_device,
&stamp_flash_device,
};
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 8a3397d..c95395b 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -371,13 +371,6 @@
};
#endif
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-static struct bfin5xx_spi_chip ad5304_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
-};
-#endif
-
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
.enable_dma = 0,
@@ -483,17 +476,6 @@
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
- {
- .modalias = "ad5304_spi",
- .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 2,
- .platform_data = NULL,
- .controller_data = &ad5304_chip_info,
- .mode = SPI_MODE_2,
- },
-#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
{
.modalias = "ad7877",
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 9e2277e..ea83148 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -128,6 +128,19 @@
};
#endif
+static struct resource bfin_gpios_resources = {
+ .start = 0,
+ .end = MAX_BLACKFIN_GPIOS - 1,
+ .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+ .name = "simple-gpio",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &bfin_gpios_resources,
+};
+
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
static struct resource bfin_pcmcia_cf_resources[] = {
{
@@ -343,7 +356,7 @@
static struct mtd_partition stamp_partitions[] = {
{
.name = "Bootloader",
- .size = 0x20000,
+ .size = 0x40000,
.offset = 0,
}, {
.name = "Kernel",
@@ -351,7 +364,7 @@
.offset = MTDPART_OFS_APPEND,
}, {
.name = "RootFS",
- .size = 0x400000 - 0x20000 - 0xE0000 - 0x10000,
+ .size = 0x400000 - 0x40000 - 0xE0000 - 0x10000,
.offset = MTDPART_OFS_APPEND,
}, {
.name = "MAC Address",
@@ -391,17 +404,17 @@
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader",
- .size = 0x00020000,
+ .size = 0x00040000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
.name = "kernel",
.size = 0xe0000,
- .offset = 0x20000
+ .offset = MTDPART_OFS_APPEND,
}, {
.name = "file system",
- .size = 0x700000,
- .offset = 0x00100000,
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
}
};
@@ -459,13 +472,6 @@
};
#endif
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-static struct bfin5xx_spi_chip ad5304_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
-};
-#endif
-
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
.enable_dma = 0,
@@ -578,17 +584,6 @@
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
- {
- .modalias = "ad5304_spi",
- .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 2,
- .platform_data = NULL,
- .controller_data = &ad5304_chip_info,
- .mode = SPI_MODE_2,
- },
-#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
{
.modalias = "ad7877",
@@ -821,6 +816,8 @@
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
&bfin_device_gpiokeys,
#endif
+
+ &bfin_gpios_device,
&stamp_flash_device,
};
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 916e963..a0950c1 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -285,8 +285,8 @@
},
{
.name = "File System",
- .offset = 4 * SIZE_1M,
- .size = (256 - 4) * SIZE_1M,
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
},
};
@@ -333,7 +333,7 @@
static struct mtd_partition ezkit_partitions[] = {
{
.name = "Bootloader",
- .size = 0x20000,
+ .size = 0x40000,
.offset = 0,
}, {
.name = "Kernel",
@@ -381,8 +381,8 @@
.mask_flags = MTD_CAP_ROM
}, {
.name = "linux kernel",
- .size = 0x1c0000,
- .offset = 0x40000
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
}
};
@@ -594,6 +594,19 @@
};
#endif
+static struct resource bfin_gpios_resources = {
+ .start = 0,
+ .end = MAX_BLACKFIN_GPIOS - 1,
+ .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+ .name = "simple-gpio",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &bfin_gpios_resources,
+};
+
static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
@@ -646,6 +659,8 @@
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
&bfin_device_gpiokeys,
#endif
+
+ &bfin_gpios_device,
&ezkit_flash_device,
};
diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c
index 374803a..f547929 100644
--- a/arch/blackfin/mach-bf548/dma.c
+++ b/arch/blackfin/mach-bf548/dma.c
@@ -27,6 +27,8 @@
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/module.h>
+
#include <asm/blackfin.h>
#include <asm/dma.h>
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index 74fe258..46222a7 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -28,6 +28,7 @@
*/
#include <linux/linkage.h>
+#include <linux/init.h>
#include <asm/blackfin.h>
#include <asm/trace.h>
#if CONFIG_BFIN_KERNEL_CLOCK
@@ -44,10 +45,9 @@
#define INITIAL_STACK 0xFFB01000
-.text
+__INIT
ENTRY(__start)
-ENTRY(__stext)
/* R0: argument of command line string, passed from uboot, save it */
R7 = R0;
/* Enable Cycle Counter and Nesting Of Interrupts */
@@ -213,6 +213,7 @@
.LWAIT_HERE:
jump .LWAIT_HERE;
+ENDPROC(__start)
ENTRY(_real_start)
[ -- sp ] = reti;
@@ -285,6 +286,9 @@
call _start_kernel;
.L_exit:
jump.s .L_exit;
+ENDPROC(_real_start)
+
+__FINIT
.section .l1.text
#if CONFIG_BFIN_KERNEL_CLOCK
@@ -450,6 +454,7 @@
SSYNC;
RTS;
+ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
.data
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 43c1b09..d357f64 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -223,7 +223,7 @@
static struct mtd_partition ezkit_partitions[] = {
{
.name = "Bootloader",
- .size = 0x20000,
+ .size = 0x40000,
.offset = 0,
}, {
.name = "Kernel",
@@ -389,6 +389,19 @@
};
#endif
+static struct resource bfin_gpios_resources = {
+ .start = 0,
+ .end = MAX_BLACKFIN_GPIOS - 1,
+ .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+ .name = "simple-gpio",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &bfin_gpios_resources,
+};
+
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
#include <linux/i2c-gpio.h>
@@ -446,6 +459,7 @@
&isp1362_hcd_device,
#endif
+ &bfin_gpios_device,
&ezkit_flash_device,
};
diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S
index b80ddd8..9d45aa3 100644
--- a/arch/blackfin/mach-common/dpmc.S
+++ b/arch/blackfin/mach-common/dpmc.S
@@ -31,140 +31,6 @@
#include <asm/blackfin.h>
#include <asm/mach/irq.h>
-.text
-
-ENTRY(_unmask_wdog_wakeup_evt)
- [--SP] = ( R7:0, P5:0 );
-#if defined(CONFIG_BF561)
- P0.H = hi(SICA_IWR1);
- P0.L = lo(SICA_IWR1);
-#elif defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
- P0.h = HI(SIC_IWR0);
- P0.l = LO(SIC_IWR0);
-#else
- P0.h = HI(SIC_IWR);
- P0.l = LO(SIC_IWR);
-#endif
- R7 = [P0];
-#if defined(CONFIG_BF561)
- BITSET(R7, 27);
-#else
- BITSET(R7,(IRQ_WATCH - IVG7));
-#endif
- [P0] = R7;
- SSYNC;
-
- ( R7:0, P5:0 ) = [SP++];
- RTS;
-
-.LWRITE_TO_STAT:
- /* When watch dog timer is enabled, a write to STAT will load the
- * contents of CNT to STAT
- */
- R7 = 0x0000(z);
-#if defined(CONFIG_BF561)
- P0.h = HI(WDOGA_STAT);
- P0.l = LO(WDOGA_STAT);
-#else
- P0.h = HI(WDOG_STAT);
- P0.l = LO(WDOG_STAT);
-#endif
- [P0] = R7;
- SSYNC;
- JUMP .LSKIP_WRITE_TO_STAT;
-
-ENTRY(_program_wdog_timer)
- [--SP] = ( R7:0, P5:0 );
-#if defined(CONFIG_BF561)
- P0.h = HI(WDOGA_CNT);
- P0.l = LO(WDOGA_CNT);
-#else
- P0.h = HI(WDOG_CNT);
- P0.l = LO(WDOG_CNT);
-#endif
- [P0] = R0;
- SSYNC;
-
-#if defined(CONFIG_BF561)
- P0.h = HI(WDOGA_CTL);
- P0.l = LO(WDOGA_CTL);
-#else
- P0.h = HI(WDOG_CTL);
- P0.l = LO(WDOG_CTL);
-#endif
- R7 = W[P0](Z);
- CC = BITTST(R7,1);
- if !CC JUMP .LWRITE_TO_STAT;
- CC = BITTST(R7,2);
- if !CC JUMP .LWRITE_TO_STAT;
-
-.LSKIP_WRITE_TO_STAT:
-#if defined(CONFIG_BF561)
- P0.h = HI(WDOGA_CTL);
- P0.l = LO(WDOGA_CTL);
-#else
- P0.h = HI(WDOG_CTL);
- P0.l = LO(WDOG_CTL);
-#endif
- R7 = W[P0](Z);
- BITCLR(R7,1); /* Enable GP event */
- BITSET(R7,2);
- W[P0] = R7.L;
- SSYNC;
- NOP;
-
- R7 = W[P0](Z);
- BITCLR(R7,4); /* Enable the wdog counter */
- W[P0] = R7.L;
- SSYNC;
-
- ( R7:0, P5:0 ) = [SP++];
- RTS;
-
-ENTRY(_clear_wdog_wakeup_evt)
- [--SP] = ( R7:0, P5:0 );
-
-#if defined(CONFIG_BF561)
- P0.h = HI(WDOGA_CTL);
- P0.l = LO(WDOGA_CTL);
-#else
- P0.h = HI(WDOG_CTL);
- P0.l = LO(WDOG_CTL);
-#endif
- R7 = 0x0AD6(Z);
- W[P0] = R7.L;
- SSYNC;
-
- R7 = W[P0](Z);
- BITSET(R7,15);
- W[P0] = R7.L;
- SSYNC;
-
- R7 = W[P0](Z);
- BITSET(R7,1);
- BITSET(R7,2);
- W[P0] = R7.L;
- SSYNC;
-
- ( R7:0, P5:0 ) = [SP++];
- RTS;
-
-ENTRY(_disable_wdog_timer)
- [--SP] = ( R7:0, P5:0 );
-#if defined(CONFIG_BF561)
- P0.h = HI(WDOGA_CTL);
- P0.l = LO(WDOGA_CTL);
-#else
- P0.h = HI(WDOG_CTL);
- P0.l = LO(WDOG_CTL);
-#endif
- R7 = 0xAD6(Z);
- W[P0] = R7.L;
- SSYNC;
- ( R7:0, P5:0 ) = [SP++];
- RTS;
-
-#if !defined(CONFIG_BF561)
.section .l1.text
@@ -459,10 +325,12 @@
RTS;
ENTRY(_set_rtc_istat)
+#ifndef CONFIG_BF561
P0.H = hi(RTC_ISTAT);
P0.L = lo(RTC_ISTAT);
w[P0] = R0.L;
SSYNC;
+#endif
RTS;
ENTRY(_test_pll_locked)
@@ -473,4 +341,3 @@
CC = BITTST(R0,5);
IF !CC JUMP 1b;
RTS;
-#endif
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 880595a..225ef14 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -74,7 +74,7 @@
#endif
struct ivgx {
- /* irq number for request_irq, available in mach-bf533/irq.h */
+ /* irq number for request_irq, available in mach-bf5xx/irq.h */
unsigned int irqno;
/* corresponding bit in the SIC_ISR register */
unsigned int isrflag;
@@ -86,7 +86,6 @@
struct ivgx *istop;
} ivg7_13[IVG13 - IVG7 + 1];
-static void search_IAR(void);
/*
* Search SIC_IAR and fill tables with the irqvalues
@@ -120,10 +119,10 @@
}
/*
- * This is for BF533 internal IRQs
+ * This is for core internal IRQs
*/
-static void ack_noop(unsigned int irq)
+static void bfin_ack_noop(unsigned int irq)
{
/* Dummy function. */
}
@@ -156,11 +155,11 @@
{
#ifdef CONFIG_BF53x
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
- ~(1 << (irq - (IRQ_CORETMR + 1))));
+ ~(1 << SIC_SYSIRQ(irq)));
#else
unsigned mask_bank, mask_bit;
- mask_bank = (irq - (IRQ_CORETMR + 1)) / 32;
- mask_bit = (irq - (IRQ_CORETMR + 1)) % 32;
+ mask_bank = SIC_SYSIRQ(irq) / 32;
+ mask_bit = SIC_SYSIRQ(irq) % 32;
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
~(1 << mask_bit));
#endif
@@ -171,11 +170,11 @@
{
#ifdef CONFIG_BF53x
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
- (1 << (irq - (IRQ_CORETMR + 1))));
+ (1 << SIC_SYSIRQ(irq)));
#else
unsigned mask_bank, mask_bit;
- mask_bank = (irq - (IRQ_CORETMR + 1)) / 32;
- mask_bit = (irq - (IRQ_CORETMR + 1)) % 32;
+ mask_bank = SIC_SYSIRQ(irq) / 32;
+ mask_bit = SIC_SYSIRQ(irq) % 32;
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
(1 << mask_bit));
#endif
@@ -187,8 +186,8 @@
{
unsigned bank, bit;
unsigned long flags;
- bank = (irq - (IRQ_CORETMR + 1)) / 32;
- bit = (irq - (IRQ_CORETMR + 1)) % 32;
+ bank = SIC_SYSIRQ(irq) / 32;
+ bit = SIC_SYSIRQ(irq) % 32;
local_irq_save(flags);
@@ -204,15 +203,18 @@
#endif
static struct irq_chip bfin_core_irqchip = {
- .ack = ack_noop,
+ .ack = bfin_ack_noop,
.mask = bfin_core_mask_irq,
.unmask = bfin_core_unmask_irq,
};
static struct irq_chip bfin_internal_irqchip = {
- .ack = ack_noop,
+ .ack = bfin_ack_noop,
.mask = bfin_internal_mask_irq,
.unmask = bfin_internal_unmask_irq,
+ .mask_ack = bfin_internal_mask_irq,
+ .disable = bfin_internal_mask_irq,
+ .enable = bfin_internal_unmask_irq,
#ifdef CONFIG_PM
.set_wake = bfin_internal_set_wake,
#endif
@@ -221,38 +223,23 @@
#ifdef BF537_GENERIC_ERROR_INT_DEMUX
static int error_int_mask;
-static void bfin_generic_error_ack_irq(unsigned int irq)
-{
-
-}
-
static void bfin_generic_error_mask_irq(unsigned int irq)
{
error_int_mask &= ~(1L << (irq - IRQ_PPI_ERROR));
- if (!error_int_mask) {
- local_irq_disable();
- bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
- ~(1 << (IRQ_GENERIC_ERROR -
- (IRQ_CORETMR + 1))));
- SSYNC();
- local_irq_enable();
- }
+ if (!error_int_mask)
+ bfin_internal_mask_irq(IRQ_GENERIC_ERROR);
}
static void bfin_generic_error_unmask_irq(unsigned int irq)
{
- local_irq_disable();
- bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | 1 <<
- (IRQ_GENERIC_ERROR - (IRQ_CORETMR + 1)));
- SSYNC();
- local_irq_enable();
-
+ bfin_internal_unmask_irq(IRQ_GENERIC_ERROR);
error_int_mask |= 1L << (irq - IRQ_PPI_ERROR);
}
static struct irq_chip bfin_generic_error_irqchip = {
- .ack = bfin_generic_error_ack_irq,
+ .ack = bfin_ack_noop,
+ .mask_ack = bfin_generic_error_mask_irq,
.mask = bfin_generic_error_mask_irq,
.unmask = bfin_generic_error_unmask_irq,
};
@@ -608,7 +595,7 @@
(struct pin_int_t *)PINT3_MASK_SET,
};
-unsigned short get_irq_base(u8 bank, u8 bmap)
+inline unsigned short get_irq_base(u8 bank, u8 bmap)
{
u16 irq_base;
@@ -969,17 +956,12 @@
#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
bfin_write_SIC_IMASK0(SIC_UNMASK_ALL);
bfin_write_SIC_IMASK1(SIC_UNMASK_ALL);
- bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
- bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
# ifdef CONFIG_BF54x
bfin_write_SIC_IMASK2(SIC_UNMASK_ALL);
- bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
# endif
#else
bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
- bfin_write_SIC_IWR(IWR_ENABLE_ALL);
#endif
- SSYNC();
local_irq_disable();
@@ -1001,90 +983,53 @@
set_irq_chip(irq, &bfin_core_irqchip);
else
set_irq_chip(irq, &bfin_internal_irqchip);
-#ifdef BF537_GENERIC_ERROR_INT_DEMUX
- if (irq != IRQ_GENERIC_ERROR) {
-#endif
- switch (irq) {
+ switch (irq) {
#if defined(CONFIG_BF53x)
- case IRQ_PROG_INTA:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
+ case IRQ_PROG_INTA:
# if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
- case IRQ_MAC_RX:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
+ case IRQ_MAC_RX:
# endif
#elif defined(CONFIG_BF54x)
- case IRQ_PINT0:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
- case IRQ_PINT1:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
- case IRQ_PINT2:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
- case IRQ_PINT3:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
+ case IRQ_PINT0:
+ case IRQ_PINT1:
+ case IRQ_PINT2:
+ case IRQ_PINT3:
#elif defined(CONFIG_BF52x)
- case IRQ_PORTF_INTA:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
- case IRQ_PORTG_INTA:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
- case IRQ_PORTH_INTA:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
+ case IRQ_PORTF_INTA:
+ case IRQ_PORTG_INTA:
+ case IRQ_PORTH_INTA:
#elif defined(CONFIG_BF561)
- case IRQ_PROG0_INTA:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
- case IRQ_PROG1_INTA:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
- case IRQ_PROG2_INTA:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
+ case IRQ_PROG0_INTA:
+ case IRQ_PROG1_INTA:
+ case IRQ_PROG2_INTA:
#endif
- default:
- set_irq_handler(irq, handle_simple_irq);
- break;
- }
-
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
#ifdef BF537_GENERIC_ERROR_INT_DEMUX
- } else {
+ case IRQ_GENERIC_ERROR:
set_irq_handler(irq, bfin_demux_error_irq);
+
+ break;
+#endif
+ default:
+ set_irq_handler(irq, handle_simple_irq);
+ break;
}
-#endif
}
+
#ifdef BF537_GENERIC_ERROR_INT_DEMUX
- for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) {
- set_irq_chip(irq, &bfin_generic_error_irqchip);
- set_irq_handler(irq, handle_level_irq);
- }
+ for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++)
+ set_irq_chip_and_handler(irq, &bfin_generic_error_irqchip,
+ handle_level_irq);
#endif
- for (irq = GPIO_IRQ_BASE; irq < NR_IRQS; irq++) {
+ /* if configured as edge, then will be changed to do_edge_IRQ */
+ for (irq = GPIO_IRQ_BASE; irq < NR_IRQS; irq++)
+ set_irq_chip_and_handler(irq, &bfin_gpio_irqchip,
+ handle_level_irq);
- set_irq_chip(irq, &bfin_gpio_irqchip);
- /* if configured as edge, then will be changed to do_edge_IRQ */
- set_irq_handler(irq, handle_level_irq);
- }
bfin_write_IMASK(0);
CSYNC();
@@ -1106,6 +1051,16 @@
IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
+ bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
+ bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
+# ifdef CONFIG_BF54x
+ bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
+# endif
+#else
+ bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+#endif
+
return 0;
}
@@ -1122,7 +1077,6 @@
#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
unsigned long sic_status[3];
- SSYNC();
sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0();
sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1();
#ifdef CONFIG_BF54x
@@ -1138,7 +1092,7 @@
}
#else
unsigned long sic_status;
- SSYNC();
+
sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
for (;; ivg++) {
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index 1f516c5..ec3141f 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -181,7 +181,7 @@
}
}
-static __init void free_init_pages(const char *what, unsigned long begin, unsigned long end)
+static void __init free_init_pages(const char *what, unsigned long begin, unsigned long end)
{
unsigned long addr;
/* next to check that the page we free is not a partial page */
@@ -203,7 +203,7 @@
}
#endif
-void __init free_initmem(void)
+void __init_refok free_initmem(void)
{
#if defined CONFIG_RAMKERNEL && !defined CONFIG_MPU
free_init_pages("unused kernel memory",
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 1392977..9eed1f6 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -1151,7 +1151,7 @@
for (i = 0; i < num_counters; ++i) {
if ((interrupt_mask & CBE_PM_CTR_OVERFLOW_INTR(i))
&& ctr[i].enabled) {
- oprofile_add_pc(pc, is_kernel, i);
+ oprofile_add_ext_sample(pc, regs, i, is_kernel);
cbe_write_ctr(cpu, i, reset_value[i]);
}
}
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index edab631..20ea0e1 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -113,7 +113,7 @@
/* IOMMU sizing */
#define IO_SEGMENT_SHIFT 28
-#define IO_PAGENO_BITS (IO_SEGMENT_SHIFT - IOMMU_PAGE_SHIFT)
+#define IO_PAGENO_BITS(shift) (IO_SEGMENT_SHIFT - (shift))
/* The high bit needs to be set on every DMA address */
#define SPIDER_DMA_OFFSET 0x80000000ul
@@ -123,7 +123,6 @@
struct cbe_iommu *iommu;
unsigned long offset;
unsigned long size;
- unsigned long pte_offset;
unsigned int ioid;
struct iommu_table table;
};
@@ -200,7 +199,7 @@
(window->ioid & IOPTE_IOID_Mask);
#endif
- io_pte = (unsigned long *)tbl->it_base + (index - window->pte_offset);
+ io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
for (i = 0; i < npages; i++, uaddr += IOMMU_PAGE_SIZE)
io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask);
@@ -232,7 +231,7 @@
| (window->ioid & IOPTE_IOID_Mask);
#endif
- io_pte = (unsigned long *)tbl->it_base + (index - window->pte_offset);
+ io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
for (i = 0; i < npages; i++)
io_pte[i] = pte;
@@ -307,76 +306,84 @@
return -ENODEV;
}
-static void cell_iommu_setup_page_tables(struct cbe_iommu *iommu,
+static void cell_iommu_setup_stab(struct cbe_iommu *iommu,
unsigned long dbase, unsigned long dsize,
unsigned long fbase, unsigned long fsize)
{
struct page *page;
- int i;
- unsigned long reg, segments, pages_per_segment, ptab_size, stab_size,
- n_pte_pages, base;
-
- base = dbase;
- if (fsize != 0)
- base = min(fbase, dbase);
+ unsigned long segments, stab_size;
segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT;
- pages_per_segment = 1ull << IO_PAGENO_BITS;
- pr_debug("%s: iommu[%d]: segments: %lu, pages per segment: %lu\n",
- __FUNCTION__, iommu->nid, segments, pages_per_segment);
+ pr_debug("%s: iommu[%d]: segments: %lu\n",
+ __FUNCTION__, iommu->nid, segments);
/* set up the segment table */
stab_size = segments * sizeof(unsigned long);
page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(stab_size));
BUG_ON(!page);
iommu->stab = page_address(page);
- clear_page(iommu->stab);
+ memset(iommu->stab, 0, stab_size);
+}
- /* ... and the page tables. Since these are contiguous, we can treat
- * the page tables as one array of ptes, like pSeries does.
- */
+static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu,
+ unsigned long base, unsigned long size, unsigned long gap_base,
+ unsigned long gap_size, unsigned long page_shift)
+{
+ struct page *page;
+ int i;
+ unsigned long reg, segments, pages_per_segment, ptab_size,
+ n_pte_pages, start_seg, *ptab;
+
+ start_seg = base >> IO_SEGMENT_SHIFT;
+ segments = size >> IO_SEGMENT_SHIFT;
+ pages_per_segment = 1ull << IO_PAGENO_BITS(page_shift);
+ /* PTEs for each segment must start on a 4K bounday */
+ pages_per_segment = max(pages_per_segment,
+ (1 << 12) / sizeof(unsigned long));
+
ptab_size = segments * pages_per_segment * sizeof(unsigned long);
pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__,
iommu->nid, ptab_size, get_order(ptab_size));
page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size));
BUG_ON(!page);
- iommu->ptab = page_address(page);
- memset(iommu->ptab, 0, ptab_size);
+ ptab = page_address(page);
+ memset(ptab, 0, ptab_size);
- /* allocate a bogus page for the end of each mapping */
- page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0);
- BUG_ON(!page);
- iommu->pad_page = page_address(page);
- clear_page(iommu->pad_page);
-
- /* number of pages needed for a page table */
- n_pte_pages = (pages_per_segment *
- sizeof(unsigned long)) >> IOMMU_PAGE_SHIFT;
+ /* number of 4K pages needed for a page table */
+ n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12;
pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n",
- __FUNCTION__, iommu->nid, iommu->stab, iommu->ptab,
+ __FUNCTION__, iommu->nid, iommu->stab, ptab,
n_pte_pages);
/* initialise the STEs */
reg = IOSTE_V | ((n_pte_pages - 1) << 5);
- if (IOMMU_PAGE_SIZE == 0x1000)
- reg |= IOSTE_PS_4K;
- else if (IOMMU_PAGE_SIZE == 0x10000)
- reg |= IOSTE_PS_64K;
- else {
- extern void __unknown_page_size_error(void);
- __unknown_page_size_error();
+ switch (page_shift) {
+ case 12: reg |= IOSTE_PS_4K; break;
+ case 16: reg |= IOSTE_PS_64K; break;
+ case 20: reg |= IOSTE_PS_1M; break;
+ case 24: reg |= IOSTE_PS_16M; break;
+ default: BUG();
}
+ gap_base = gap_base >> IO_SEGMENT_SHIFT;
+ gap_size = gap_size >> IO_SEGMENT_SHIFT;
+
pr_debug("Setting up IOMMU stab:\n");
- for (i = base >> IO_SEGMENT_SHIFT; i < segments; i++) {
- iommu->stab[i] = reg |
- (__pa(iommu->ptab) + n_pte_pages * IOMMU_PAGE_SIZE * i);
+ for (i = start_seg; i < (start_seg + segments); i++) {
+ if (i >= gap_base && i < (gap_base + gap_size)) {
+ pr_debug("\toverlap at %d, skipping\n", i);
+ continue;
+ }
+ iommu->stab[i] = reg | (__pa(ptab) + (n_pte_pages << 12) *
+ (i - start_seg));
pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]);
}
+
+ return ptab;
}
static void cell_iommu_enable_hardware(struct cbe_iommu *iommu)
@@ -423,7 +430,9 @@
static void cell_iommu_setup_hardware(struct cbe_iommu *iommu,
unsigned long base, unsigned long size)
{
- cell_iommu_setup_page_tables(iommu, base, size, 0, 0);
+ cell_iommu_setup_stab(iommu, base, size, 0, 0);
+ iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0,
+ IOMMU_PAGE_SHIFT);
cell_iommu_enable_hardware(iommu);
}
@@ -464,6 +473,7 @@
unsigned long pte_offset)
{
struct iommu_window *window;
+ struct page *page;
u32 ioid;
ioid = cell_iommu_get_ioid(np);
@@ -475,13 +485,11 @@
window->size = size;
window->ioid = ioid;
window->iommu = iommu;
- window->pte_offset = pte_offset;
window->table.it_blocksize = 16;
window->table.it_base = (unsigned long)iommu->ptab;
window->table.it_index = iommu->nid;
- window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) +
- window->pte_offset;
+ window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) + pte_offset;
window->table.it_size = size >> IOMMU_PAGE_SHIFT;
iommu_init_table(&window->table, iommu->nid);
@@ -504,6 +512,11 @@
* This code also assumes that we have a window that starts at 0,
* which is the case on all spider based blades.
*/
+ page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0);
+ BUG_ON(!page);
+ iommu->pad_page = page_address(page);
+ clear_page(iommu->pad_page);
+
__set_bit(0, window->table.it_map);
tce_build_cell(&window->table, window->table.it_offset, 1,
(unsigned long)iommu->pad_page, DMA_TO_DEVICE);
@@ -549,7 +562,7 @@
archdata->dma_data = &window->table;
}
-static void cell_dma_dev_setup_static(struct device *dev);
+static void cell_dma_dev_setup_fixed(struct device *dev);
static void cell_dma_dev_setup(struct device *dev)
{
@@ -557,7 +570,7 @@
/* Order is important here, these are not mutually exclusive */
if (get_dma_ops(dev) == &dma_iommu_fixed_ops)
- cell_dma_dev_setup_static(dev);
+ cell_dma_dev_setup_fixed(dev);
else if (get_pci_dma_ops() == &dma_iommu_ops)
cell_dma_dev_setup_iommu(dev);
else if (get_pci_dma_ops() == &dma_direct_ops)
@@ -858,7 +871,7 @@
return 0;
}
-static void cell_dma_dev_setup_static(struct device *dev)
+static void cell_dma_dev_setup_fixed(struct device *dev)
{
struct dev_archdata *archdata = &dev->archdata;
u64 addr;
@@ -869,35 +882,45 @@
dev_dbg(dev, "iommu: fixed addr = %lx\n", addr);
}
+static void insert_16M_pte(unsigned long addr, unsigned long *ptab,
+ unsigned long base_pte)
+{
+ unsigned long segment, offset;
+
+ segment = addr >> IO_SEGMENT_SHIFT;
+ offset = (addr >> 24) - (segment << IO_PAGENO_BITS(24));
+ ptab = ptab + (segment * (1 << 12) / sizeof(unsigned long));
+
+ pr_debug("iommu: addr %lx ptab %p segment %lx offset %lx\n",
+ addr, ptab, segment, offset);
+
+ ptab[offset] = base_pte | (__pa(addr) & IOPTE_RPN_Mask);
+}
+
static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu,
struct device_node *np, unsigned long dbase, unsigned long dsize,
unsigned long fbase, unsigned long fsize)
{
- unsigned long base_pte, uaddr, *io_pte;
- int i;
+ unsigned long base_pte, uaddr, ioaddr, *ptab;
+
+ ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, 24);
dma_iommu_fixed_base = fbase;
- /* convert from bytes into page table indices */
- dbase = dbase >> IOMMU_PAGE_SHIFT;
- dsize = dsize >> IOMMU_PAGE_SHIFT;
- fbase = fbase >> IOMMU_PAGE_SHIFT;
- fsize = fsize >> IOMMU_PAGE_SHIFT;
-
pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase);
- io_pte = iommu->ptab;
base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW
| (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask);
- uaddr = 0;
- for (i = fbase; i < fbase + fsize; i++, uaddr += IOMMU_PAGE_SIZE) {
+ for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) {
/* Don't touch the dynamic region */
- if (i >= dbase && i < (dbase + dsize)) {
- pr_debug("iommu: static/dynamic overlap, skipping\n");
+ ioaddr = uaddr + fbase;
+ if (ioaddr >= dbase && ioaddr < (dbase + dsize)) {
+ pr_debug("iommu: fixed/dynamic overlap, skipping\n");
continue;
}
- io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask);
+
+ insert_16M_pte(uaddr, ptab, base_pte);
}
mb();
@@ -995,7 +1018,9 @@
"fixed window 0x%lx-0x%lx\n", iommu->nid, dbase,
dbase + dsize, fbase, fbase + fsize);
- cell_iommu_setup_page_tables(iommu, dbase, dsize, fbase, fsize);
+ cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize);
+ iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0,
+ IOMMU_PAGE_SHIFT);
cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize,
fbase, fsize);
cell_iommu_enable_hardware(iommu);
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index a7f609b..dda3465 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -149,6 +149,11 @@
mpic_init_IRQ();
}
+static void __init cell_set_dabrx(void)
+{
+ mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
+}
+
static void __init cell_setup_arch(void)
{
#ifdef CONFIG_SPU_BASE
@@ -158,6 +163,8 @@
cbe_regs_init();
+ cell_set_dabrx();
+
#ifdef CONFIG_CBE_RAS
cbe_ras_init();
#endif
diff --git a/arch/powerpc/platforms/celleb/beat.h b/arch/powerpc/platforms/celleb/beat.h
index b2e292d..ac82ac3 100644
--- a/arch/powerpc/platforms/celleb/beat.h
+++ b/arch/powerpc/platforms/celleb/beat.h
@@ -21,9 +21,6 @@
#ifndef _CELLEB_BEAT_H
#define _CELLEB_BEAT_H
-#define DABRX_KERNEL (1UL<<1)
-#define DABRX_USER (1UL<<0)
-
int64_t beat_get_term_char(uint64_t,uint64_t*,uint64_t*,uint64_t*);
int64_t beat_put_term_char(uint64_t,uint64_t,uint64_t,uint64_t);
int64_t beat_repository_encode(int, const char *, uint64_t[4]);
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index b3400b5..783cfbb 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -330,6 +330,7 @@
config CPU_SUBTYPE_SH5_103
bool "Support SH5-103 processor"
+ select CPU_SH5
endchoice
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 5c33597..71ff3d6 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -90,7 +90,7 @@
static int sh_dmac_request_dma(struct dma_channel *chan)
{
- if (unlikely(!chan->flags & DMA_TEI_CAPABLE))
+ if (unlikely(!(chan->flags & DMA_TEI_CAPABLE)))
return 0;
return request_irq(get_dmte_irq(chan->chan), dma_tei,
diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c
index b76a14f..ab77b0e 100644
--- a/arch/sh/drivers/heartbeat.c
+++ b/arch/sh/drivers/heartbeat.c
@@ -93,7 +93,7 @@
}
hd->base = ioremap_nocache(res->start, res->end - res->start + 1);
- if (!unlikely(hd->base)) {
+ if (unlikely(!hd->base)) {
dev_err(&pdev->dev, "ioremap failed\n");
if (!pdev->dev.platform_data)
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
index 0dac87b1..e1284fc 100644
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -83,9 +83,9 @@
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
- case 1: *val = ctrl_inb(GAPSPCI_BBA_CONFIG+where); break;
- case 2: *val = ctrl_inw(GAPSPCI_BBA_CONFIG+where); break;
- case 4: *val = ctrl_inl(GAPSPCI_BBA_CONFIG+where); break;
+ case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
+ case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
+ case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
}
return PCIBIOS_SUCCESSFUL;
@@ -97,9 +97,9 @@
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
- case 1: ctrl_outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
- case 2: ctrl_outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
- case 4: ctrl_outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
+ case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
+ case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
+ case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
}
return PCIBIOS_SUCCESSFUL;
@@ -127,36 +127,36 @@
*/
for (i=0; i<16; i++)
- idbuf[i] = ctrl_inb(GAPSPCI_REGS+i);
+ idbuf[i] = inb(GAPSPCI_REGS+i);
if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
return -ENODEV;
- ctrl_outl(0x5a14a501, GAPSPCI_REGS+0x18);
+ outl(0x5a14a501, GAPSPCI_REGS+0x18);
for (i=0; i<1000000; i++)
;
- if (ctrl_inl(GAPSPCI_REGS+0x18) != 1)
+ if (inl(GAPSPCI_REGS+0x18) != 1)
return -EINVAL;
- ctrl_outl(0x01000000, GAPSPCI_REGS+0x20);
- ctrl_outl(0x01000000, GAPSPCI_REGS+0x24);
+ outl(0x01000000, GAPSPCI_REGS+0x20);
+ outl(0x01000000, GAPSPCI_REGS+0x24);
- ctrl_outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
- ctrl_outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
+ outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
+ outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
- ctrl_outl(1, GAPSPCI_REGS+0x14);
- ctrl_outl(1, GAPSPCI_REGS+0x34);
+ outl(1, GAPSPCI_REGS+0x14);
+ outl(1, GAPSPCI_REGS+0x34);
/* Setting Broadband Adapter */
- ctrl_outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
- ctrl_outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
- ctrl_outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
- ctrl_outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
- ctrl_outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
- ctrl_outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
- ctrl_outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
+ outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
+ outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
+ outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
+ outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
+ outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
+ outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
+ outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
return 0;
}
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index b230eb2..cc530f4 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -10,7 +10,7 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
enum {
UNUSED = 0,
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
index 3feb95a4..fb78132 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
@@ -21,8 +21,8 @@
#include <asm/freq.h>
#include <asm/io.h>
-const static int pll1rate[]={8,12,16,0};
-const static int pfc_divisors[]={1,2,3,4,6,8,12};
+static const int pll1rate[]={8,12,16,0};
+static const int pfc_divisors[]={1,2,3,4,6,8,12};
#define ifc_divisors pfc_divisors
#if (CONFIG_SH_CLK_MD == 0)
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
index db6ef5c..e98dc44 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
@@ -10,7 +10,7 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
enum {
UNUSED = 0,
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
index a564425..e6d4ec4 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
@@ -10,7 +10,7 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
enum {
UNUSED = 0,
diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c
index fcc80bb..10f2a76 100644
--- a/arch/sh/kernel/cpu/sh3/probe.c
+++ b/arch/sh/kernel/cpu/sh3/probe.c
@@ -94,9 +94,9 @@
boot_cpu_data.dcache.way_incr = (1 << 13);
boot_cpu_data.dcache.entry_mask = 0x1ff0;
boot_cpu_data.dcache.sets = 512;
- ctrl_outl(CCR_CACHE_32KB, CCR3);
+ ctrl_outl(CCR_CACHE_32KB, CCR3_REG);
#else
- ctrl_outl(CCR_CACHE_16KB, CCR3);
+ ctrl_outl(CCR_CACHE_16KB, CCR3_REG);
#endif
#endif
}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
index dd0a20a..f581534 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
#include <asm/rtc.h>
enum {
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
index 969804b..d3733b1 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
@@ -16,7 +16,7 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
enum {
UNUSED = 0,
@@ -123,15 +123,15 @@
.flags = IORESOURCE_IO,
},
[1] = {
- .start = 20,
+ .start = 21,
.flags = IORESOURCE_IRQ,
},
[2] = {
- .start = 21,
+ .start = 22,
.flags = IORESOURCE_IRQ,
},
[3] = {
- .start = 22,
+ .start = 20,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
index 0cc0e2b..7406c9a 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
#include <asm/rtc.h>
enum {
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
index 3855ea4..8028082 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
@@ -16,7 +16,7 @@
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/io.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
#include <asm/rtc.h>
#define INTC_ICR1 0xA4140010UL
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
index dab1932..7371abf 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
@@ -10,7 +10,7 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
static struct plat_sci_port sci_platform_data[] = {
{
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index ae3603a..ec88403 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/io.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
static struct resource rtc_resources[] = {
[0] = {
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index 85f8157..254c5c5 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -10,7 +10,7 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
enum {
UNUSED = 0,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index c0a3f07..6d4f50c 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -10,7 +10,7 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
static struct plat_sci_port sci_platform_data[] = {
{
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index 967e8b6..f26b5cd 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -12,7 +12,7 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
static struct plat_sci_port sci_platform_data[] = {
{
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 73c778d..b98b4bc 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -10,9 +10,9 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
+#include <linux/serial_sci.h>
#include <linux/mm.h>
#include <asm/mmzone.h>
-#include <asm/sci.h>
static struct resource usbf_resources[] = {
[0] = {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index eabd538..07c988d 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/io.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
static struct resource rtc_resources[] = {
[0] = {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
index 32f4f59..b9cec48 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
@@ -10,7 +10,7 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
static struct plat_sci_port sci_platform_data[] = {
{
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 293004b..18dbbe2 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -11,7 +11,7 @@
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/io.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
static struct resource rtc_resources[] = {
[0] = {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index 74b60e9..621e732 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -10,10 +10,10 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
+#include <linux/serial_sci.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <asm/mmzone.h>
-#include <asm/sci.h>
static struct plat_sci_port sci_platform_data[] = {
{
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
index 4dc958b..bd35f3253 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -10,9 +10,9 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
+#include <linux/serial_sci.h>
#include <linux/io.h>
#include <asm/mmzone.h>
-#include <asm/sci.h>
static struct plat_sci_port sci_platform_data[] = {
{
diff --git a/arch/sparc/kernel/led.c b/arch/sparc/kernel/led.c
index 313d162..59e9344 100644
--- a/arch/sparc/kernel/led.c
+++ b/arch/sparc/kernel/led.c
@@ -3,6 +3,9 @@
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/string.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
+#include <linux/uaccess.h>
#include <asm/auxio.h>
diff --git a/arch/sparc64/kernel/ds.c b/arch/sparc64/kernel/ds.c
index eeb5a2f..bd76482 100644
--- a/arch/sparc64/kernel/ds.c
+++ b/arch/sparc64/kernel/ds.c
@@ -525,10 +525,10 @@
}
}
-static int dr_cpu_configure(struct ds_info *dp,
- struct ds_cap_state *cp,
- u64 req_num,
- cpumask_t *mask)
+static int __cpuinit dr_cpu_configure(struct ds_info *dp,
+ struct ds_cap_state *cp,
+ u64 req_num,
+ cpumask_t *mask)
{
struct ds_data *resp;
int resp_len, ncpus, cpu;
@@ -623,9 +623,9 @@
return 0;
}
-static void dr_cpu_data(struct ds_info *dp,
- struct ds_cap_state *cp,
- void *buf, int len)
+static void __cpuinit dr_cpu_data(struct ds_info *dp,
+ struct ds_cap_state *cp,
+ void *buf, int len)
{
struct ds_data *data = buf;
struct dr_cpu_tag *tag = (struct dr_cpu_tag *) (data + 1);
diff --git a/arch/sparc64/kernel/hvtramp.S b/arch/sparc64/kernel/hvtramp.S
index b692e04..0236c43 100644
--- a/arch/sparc64/kernel/hvtramp.S
+++ b/arch/sparc64/kernel/hvtramp.S
@@ -3,6 +3,8 @@
* Copyright (C) 2007 David S. Miller <davem@davemloft.net>
*/
+#include <linux/init.h>
+
#include <asm/thread_info.h>
#include <asm/hypervisor.h>
#include <asm/scratchpad.h>
@@ -13,7 +15,7 @@
#include <asm/head.h>
#include <asm/asi.h>
- .text
+ __CPUINIT
.align 8
.globl hv_cpu_startup, hv_cpu_startup_end
diff --git a/arch/sparc64/kernel/iommu.c b/arch/sparc64/kernel/iommu.c
index 0e347ff..fbaab34 100644
--- a/arch/sparc64/kernel/iommu.c
+++ b/arch/sparc64/kernel/iommu.c
@@ -134,7 +134,8 @@
else
boundary_size = ALIGN(1UL << 32, 1 << IO_PAGE_SHIFT);
- n = iommu_area_alloc(arena->map, limit, start, npages, 0,
+ n = iommu_area_alloc(arena->map, limit, start, npages,
+ iommu->page_table_map_base >> IO_PAGE_SHIFT,
boundary_size >> IO_PAGE_SHIFT, 0);
if (n == -1) {
if (likely(pass < 1)) {
diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c
index 34fc3dd..f43b5d7 100644
--- a/arch/sparc64/kernel/kprobes.c
+++ b/arch/sparc64/kernel/kprobes.c
@@ -465,8 +465,6 @@
extern void jprobe_return_trap_instruction(void);
-extern void __show_regs(struct pt_regs * regs);
-
int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
{
u32 *addr = (u32 *) regs->tpc;
diff --git a/arch/sparc64/kernel/mdesc.c b/arch/sparc64/kernel/mdesc.c
index 856659b..9100835 100644
--- a/arch/sparc64/kernel/mdesc.c
+++ b/arch/sparc64/kernel/mdesc.c
@@ -758,7 +758,7 @@
get_one_mondo_bits(val, &tb->nonresum_qmask, 2);
}
-void __devinit mdesc_fill_in_cpu_data(cpumask_t mask)
+void __cpuinit mdesc_fill_in_cpu_data(cpumask_t mask)
{
struct mdesc_handle *hp = mdesc_grab();
u64 mp;
diff --git a/arch/sparc64/kernel/power.c b/arch/sparc64/kernel/power.c
index 850cdff..eae8ca2 100644
--- a/arch/sparc64/kernel/power.c
+++ b/arch/sparc64/kernel/power.c
@@ -20,6 +20,7 @@
#include <asm/of_device.h>
#include <asm/io.h>
#include <asm/sstate.h>
+#include <asm/reboot.h>
#include <linux/unistd.h>
@@ -39,8 +40,6 @@
return IRQ_HANDLED;
}
-extern void machine_halt(void);
-extern void machine_alt_power_off(void);
static void (*poweroff_method)(void) = machine_alt_power_off;
void machine_power_off(void)
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index 6eceac5..2aafce7 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -30,6 +30,7 @@
#include <linux/tick.h>
#include <linux/init.h>
#include <linux/cpu.h>
+#include <linux/elfcore.h>
#include <asm/oplib.h>
#include <asm/uaccess.h>
@@ -47,6 +48,8 @@
#include <asm/unistd.h>
#include <asm/hypervisor.h>
#include <asm/sstate.h>
+#include <asm/reboot.h>
+#include <asm/syscalls.h>
/* #define VERBOSE_SHOWREGS */
@@ -211,62 +214,6 @@
print_symbol("I7: <%s>\n", rwk->ins[7]);
}
-void show_stackframe(struct sparc_stackf *sf)
-{
- unsigned long size;
- unsigned long *stk;
- int i;
-
- printk("l0: %016lx l1: %016lx l2: %016lx l3: %016lx\n"
- "l4: %016lx l5: %016lx l6: %016lx l7: %016lx\n",
- sf->locals[0], sf->locals[1], sf->locals[2], sf->locals[3],
- sf->locals[4], sf->locals[5], sf->locals[6], sf->locals[7]);
- printk("i0: %016lx i1: %016lx i2: %016lx i3: %016lx\n"
- "i4: %016lx i5: %016lx fp: %016lx ret_pc: %016lx\n",
- sf->ins[0], sf->ins[1], sf->ins[2], sf->ins[3],
- sf->ins[4], sf->ins[5], (unsigned long)sf->fp, sf->callers_pc);
- printk("sp: %016lx x0: %016lx x1: %016lx x2: %016lx\n"
- "x3: %016lx x4: %016lx x5: %016lx xx: %016lx\n",
- (unsigned long)sf->structptr, sf->xargs[0], sf->xargs[1],
- sf->xargs[2], sf->xargs[3], sf->xargs[4], sf->xargs[5],
- sf->xxargs[0]);
- size = ((unsigned long)sf->fp) - ((unsigned long)sf);
- size -= STACKFRAME_SZ;
- stk = (unsigned long *)((unsigned long)sf + STACKFRAME_SZ);
- i = 0;
- do {
- printk("s%d: %016lx\n", i++, *stk++);
- } while ((size -= sizeof(unsigned long)));
-}
-
-void show_stackframe32(struct sparc_stackf32 *sf)
-{
- unsigned long size;
- unsigned *stk;
- int i;
-
- printk("l0: %08x l1: %08x l2: %08x l3: %08x\n",
- sf->locals[0], sf->locals[1], sf->locals[2], sf->locals[3]);
- printk("l4: %08x l5: %08x l6: %08x l7: %08x\n",
- sf->locals[4], sf->locals[5], sf->locals[6], sf->locals[7]);
- printk("i0: %08x i1: %08x i2: %08x i3: %08x\n",
- sf->ins[0], sf->ins[1], sf->ins[2], sf->ins[3]);
- printk("i4: %08x i5: %08x fp: %08x ret_pc: %08x\n",
- sf->ins[4], sf->ins[5], sf->fp, sf->callers_pc);
- printk("sp: %08x x0: %08x x1: %08x x2: %08x\n"
- "x3: %08x x4: %08x x5: %08x xx: %08x\n",
- sf->structptr, sf->xargs[0], sf->xargs[1],
- sf->xargs[2], sf->xargs[3], sf->xargs[4], sf->xargs[5],
- sf->xxargs[0]);
- size = ((unsigned long)sf->fp) - ((unsigned long)sf);
- size -= STACKFRAME32_SZ;
- stk = (unsigned *)((unsigned long)sf + STACKFRAME32_SZ);
- i = 0;
- do {
- printk("s%d: %08x\n", i++, *stk++);
- } while ((size -= sizeof(unsigned)));
-}
-
#ifdef CONFIG_SMP
static DEFINE_SPINLOCK(regdump_lock);
#endif
@@ -354,24 +301,6 @@
#endif
}
-void show_regs32(struct pt_regs32 *regs)
-{
- printk("PSR: %08x PC: %08x NPC: %08x Y: %08x %s\n", regs->psr,
- regs->pc, regs->npc, regs->y, print_tainted());
- printk("g0: %08x g1: %08x g2: %08x g3: %08x ",
- regs->u_regs[0], regs->u_regs[1], regs->u_regs[2],
- regs->u_regs[3]);
- printk("g4: %08x g5: %08x g6: %08x g7: %08x\n",
- regs->u_regs[4], regs->u_regs[5], regs->u_regs[6],
- regs->u_regs[7]);
- printk("o0: %08x o1: %08x o2: %08x o3: %08x ",
- regs->u_regs[8], regs->u_regs[9], regs->u_regs[10],
- regs->u_regs[11]);
- printk("o4: %08x o5: %08x sp: %08x ret_pc: %08x\n",
- regs->u_regs[12], regs->u_regs[13], regs->u_regs[14],
- regs->u_regs[15]);
-}
-
unsigned long thread_saved_pc(struct task_struct *tsk)
{
struct thread_info *ti = task_thread_info(tsk);
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index a8052b7..cc45473 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -86,7 +86,7 @@
static volatile unsigned long callin_flag = 0;
-void __devinit smp_callin(void)
+void __cpuinit smp_callin(void)
{
int cpuid = hard_smp_processor_id();
diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S
index 04e81dd..4ae2e52 100644
--- a/arch/sparc64/kernel/trampoline.S
+++ b/arch/sparc64/kernel/trampoline.S
@@ -4,6 +4,8 @@
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
*/
+#include <linux/init.h>
+
#include <asm/head.h>
#include <asm/asi.h>
#include <asm/lsu.h>
@@ -36,7 +38,7 @@
tramp_stack:
.skip TRAMP_STACK_SIZE
- .text
+ __CPUINIT
.align 8
.globl sparc64_cpu_startup, sparc64_cpu_startup_end
sparc64_cpu_startup:
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index 2b6abf6..007f531 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -1791,8 +1791,6 @@
};
}
-extern void __show_regs(struct pt_regs * regs);
-
static void sun4v_log_error(struct pt_regs *regs, struct sun4v_error_entry *ent, int cpu, const char *pfx, atomic_t *ocnt)
{
int cnt;
diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c
index e2027f2..2650d0d 100644
--- a/arch/sparc64/mm/fault.c
+++ b/arch/sparc64/mm/fault.c
@@ -244,16 +244,8 @@
if (regs->tstate & TSTATE_PRIV) {
const struct exception_table_entry *entry;
- if (asi == ASI_P && (insn & 0xc0800000) == 0xc0800000) {
- if (insn & 0x2000)
- asi = (regs->tstate >> 24);
- else
- asi = (insn >> 5);
- }
-
- /* Look in asi.h: All _S asis have LS bit set */
- if ((asi & 0x1) &&
- (entry = search_exception_tables(regs->tpc))) {
+ entry = search_exception_tables(regs->tpc);
+ if (entry) {
regs->tpc = entry->fixup;
regs->tnpc = regs->tpc + 4;
return;
@@ -294,7 +286,7 @@
unsigned long tpc = regs->tpc;
/* Sanity check the PC. */
- if ((tpc >= KERNBASE && tpc < (unsigned long) _etext) ||
+ if ((tpc >= KERNBASE && tpc < (unsigned long) __init_end) ||
(tpc >= MODULES_VADDR && tpc < MODULES_END)) {
/* Valid, no problems... */
} else {
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index 9e6bca2..b5c3041 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -1010,7 +1010,8 @@
static int pall_ents __initdata;
#ifdef CONFIG_DEBUG_PAGEALLOC
-static unsigned long kernel_map_range(unsigned long pstart, unsigned long pend, pgprot_t prot)
+static unsigned long __ref kernel_map_range(unsigned long pstart,
+ unsigned long pend, pgprot_t prot)
{
unsigned long vstart = PAGE_OFFSET + pstart;
unsigned long vend = PAGE_OFFSET + pend;
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index fc50d2f..e8cb9ff 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -128,8 +128,6 @@
return current;
}
-extern void schedule_tail(struct task_struct *prev);
-
/*
* This is called magically, by its address being stuffed in a jmp_buf
* and being longjmp-d to.
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index e09a6b7..6d50064 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -377,6 +377,19 @@
def_bool y
depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
+#
+# P6_NOPs are a relatively minor optimization that require a family >=
+# 6 processor, except that it is broken on certain VIA chips.
+# Furthermore, AMD chips prefer a totally different sequence of NOPs
+# (which work on all CPUs). As a result, disallow these if we're
+# compiling X86_GENERIC but not X86_64 (these NOPs do work on all
+# x86-64 capable chips); the list of processors in the right-hand clause
+# are the cores that benefit from this optimization.
+#
+config X86_P6_NOP
+ def_bool y
+ depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || PENTIUM4)
+
config X86_TSC
def_bool y
depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64
@@ -390,6 +403,7 @@
config X86_MINIMUM_CPU_FAMILY
int
default "64" if X86_64
+ default "6" if X86_32 && X86_P6_NOP
default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK)
default "3"
diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c
index 3783539..e77d89f 100644
--- a/arch/x86/boot/memory.c
+++ b/arch/x86/boot/memory.c
@@ -37,6 +37,12 @@
"=m" (*desc)
: "D" (desc), "d" (SMAP), "a" (0xe820));
+ /* BIOSes which terminate the chain with CF = 1 as opposed
+ to %ebx = 0 don't always report the SMAP signature on
+ the final, failing, probe. */
+ if (err)
+ break;
+
/* Some BIOSes stop returning SMAP in the middle of
the search loop. We don't know exactly how the BIOS
screwed up the map at that point, we might have a
@@ -47,9 +53,6 @@
break;
}
- if (err)
- break;
-
count++;
desc++;
} while (next && count < E820MAX);
diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
index a33d530..8ea0401 100644
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -128,13 +128,11 @@
OFFSET(XEN_vcpu_info_pending, vcpu_info, evtchn_upcall_pending);
#endif
-#ifdef CONFIG_LGUEST_GUEST
+#if defined(CONFIG_LGUEST) || defined(CONFIG_LGUEST_GUEST) || defined(CONFIG_LGUEST_MODULE)
BLANK();
OFFSET(LGUEST_DATA_irq_enabled, lguest_data, irq_enabled);
OFFSET(LGUEST_DATA_pgdir, lguest_data, pgdir);
-#endif
-#ifdef CONFIG_LGUEST
BLANK();
OFFSET(LGUEST_PAGES_host_gdt_desc, lguest_pages, state.host_gdt_desc);
OFFSET(LGUEST_PAGES_host_idt_desc, lguest_pages, state.host_idt_desc);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index f86a3c4..a38aafae 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -504,7 +504,7 @@
/* Clear all flags overriden by options */
for (i = 0; i < NCAPINTS; i++)
- c->x86_capability[i] ^= cleared_cpu_caps[i];
+ c->x86_capability[i] &= ~cleared_cpu_caps[i];
/* Init Machine Check Exception if available. */
mcheck_init(c);
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index b6e136f..be83336 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -43,6 +43,7 @@
#include <asm/uaccess.h>
#include <asm/processor.h>
#include <asm/msr.h>
+#include <asm/kvm_para.h>
#include "mtrr.h"
u32 num_var_ranges = 0;
@@ -649,6 +650,7 @@
/**
* mtrr_trim_uncached_memory - trim RAM not covered by MTRRs
+ * @end_pfn: ending page frame number
*
* Some buggy BIOSes don't setup the MTRRs properly for systems with certain
* memory configurations. This routine checks that the highest MTRR matches
@@ -688,8 +690,11 @@
/* kvm/qemu doesn't have mtrr set right, don't trim them all */
if (!highest_pfn) {
- printk(KERN_WARNING "WARNING: strange, CPU MTRRs all blank?\n");
- WARN_ON(1);
+ if (!kvm_para_available()) {
+ printk(KERN_WARNING
+ "WARNING: strange, CPU MTRRs all blank?\n");
+ WARN_ON(1);
+ }
return 0;
}
diff --git a/arch/x86/kernel/cpu/transmeta.c b/arch/x86/kernel/cpu/transmeta.c
index 200fb3f..e8b422c 100644
--- a/arch/x86/kernel/cpu/transmeta.c
+++ b/arch/x86/kernel/cpu/transmeta.c
@@ -76,13 +76,6 @@
/* All Transmeta CPUs have a constant TSC */
set_bit(X86_FEATURE_CONSTANT_TSC, c->x86_capability);
- /* If we can run i686 user-space code, call us an i686 */
-#define USER686 ((1 << X86_FEATURE_TSC)|\
- (1 << X86_FEATURE_CX8)|\
- (1 << X86_FEATURE_CMOV))
- if (c->x86 == 5 && (c->x86_capability[0] & USER686) == USER686)
- c->x86 = 6;
-
#ifdef CONFIG_SYSCTL
/* randomize_va_space slows us down enormously;
it probably triggers retranslation of x86->native bytecode */
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 2ad9a1b..c20c9e7 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -453,6 +453,7 @@
CFI_REGISTER rip, r11
SAVE_REST
FIXUP_TOP_OF_STACK %r11
+ movq %rsp, %rcx
call sys_execve
RESTORE_TOP_OF_STACK %r11
movq %rax,RAX(%rsp)
@@ -1036,15 +1037,16 @@
* rdi: name, rsi: argv, rdx: envp
*
* We want to fallback into:
- * extern long sys_execve(char *name, char **argv,char **envp, struct pt_regs regs)
+ * extern long sys_execve(char *name, char **argv,char **envp, struct pt_regs *regs)
*
* do_sys_execve asm fallback arguments:
- * rdi: name, rsi: argv, rdx: envp, fake frame on the stack
+ * rdi: name, rsi: argv, rdx: envp, rcx: fake frame on the stack
*/
ENTRY(kernel_execve)
CFI_STARTPROC
FAKE_STACK_FRAME $0
SAVE_ALL
+ movq %rsp,%rcx
call sys_execve
movq %rax, RAX(%rsp)
RESTORE_REST
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 25eb985..fd8ca53 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -606,7 +606,7 @@
.section ".bss.page_aligned","wa"
.align PAGE_SIZE_asm
#ifdef CONFIG_X86_PAE
-ENTRY(swapper_pg_pmd)
+swapper_pg_pmd:
.fill 1024*KPMDS,4,0
#else
ENTRY(swapper_pg_dir)
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index eb41504..a007454 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -379,18 +379,24 @@
/* Since I easily can, map the first 1G.
* Don't set NX because code runs from these pages.
*/
- PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC, PTRS_PER_PMD)
+ PMDS(0, __PAGE_KERNEL_LARGE_EXEC, PTRS_PER_PMD)
NEXT_PAGE(level2_kernel_pgt)
- /* 40MB kernel mapping. The kernel code cannot be bigger than that.
- When you change this change KERNEL_TEXT_SIZE in page.h too. */
- /* (2^48-(2*1024*1024*1024)-((2^39)*511)-((2^30)*510)) = 0 */
- PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL, KERNEL_TEXT_SIZE/PMD_SIZE)
- /* Module mapping starts here */
- .fill (PTRS_PER_PMD - (KERNEL_TEXT_SIZE/PMD_SIZE)),8,0
+ /*
+ * 128 MB kernel mapping. We spend a full page on this pagetable
+ * anyway.
+ *
+ * The kernel code+data+bss must not be bigger than that.
+ *
+ * (NOTE: at +128MB starts the module area, see MODULES_VADDR.
+ * If you want to increase this then increase MODULES_VADDR
+ * too.)
+ */
+ PMDS(0, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL,
+ KERNEL_IMAGE_SIZE/PMD_SIZE)
NEXT_PAGE(level2_spare_pgt)
- .fill 512,8,0
+ .fill 512, 8, 0
#undef PMDS
#undef NEXT_PAGE
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 429d084..235fd6c 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -368,8 +368,8 @@
return 0;
}
-/*
- * Try to setup the HPET timer
+/**
+ * hpet_enable - Try to setup the HPET timer. Returns 1 on success.
*/
int __init hpet_enable(void)
{
diff --git a/arch/x86/kernel/init_task.c b/arch/x86/kernel/init_task.c
index 5b3ce79..3d01e47 100644
--- a/arch/x86/kernel/init_task.c
+++ b/arch/x86/kernel/init_task.c
@@ -15,6 +15,7 @@
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
+EXPORT_UNUSED_SYMBOL(init_mm); /* will be removed in 2.6.26 */
/*
* Initial thread structure.
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index a7d50a5..be3c7a2 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -603,11 +603,13 @@
}
#endif
+#ifdef X86_BTS
if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS))
ptrace_bts_take_timestamp(prev_p, BTS_TASK_DEPARTS);
if (test_tsk_thread_flag(next_p, TIF_BTS_TRACE_TS))
ptrace_bts_take_timestamp(next_p, BTS_TASK_ARRIVES);
+#endif
if (!test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index b0cc8f0..3baf9b9 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -604,11 +604,13 @@
memset(tss->io_bitmap, 0xff, prev->io_bitmap_max);
}
+#ifdef X86_BTS
if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS))
ptrace_bts_take_timestamp(prev_p, BTS_TASK_DEPARTS);
if (test_tsk_thread_flag(next_p, TIF_BTS_TRACE_TS))
ptrace_bts_take_timestamp(next_p, BTS_TASK_ARRIVES);
+#endif
}
/*
@@ -730,16 +732,16 @@
*/
asmlinkage
long sys_execve(char __user *name, char __user * __user *argv,
- char __user * __user *envp, struct pt_regs regs)
+ char __user * __user *envp, struct pt_regs *regs)
{
long error;
char * filename;
filename = getname(name);
error = PTR_ERR(filename);
- if (IS_ERR(filename))
+ if (IS_ERR(filename))
return error;
- error = do_execve(filename, argv, envp, ®s);
+ error = do_execve(filename, argv, envp, regs);
putname(filename);
return error;
}
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index d862e39..f41fdc9 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -544,6 +544,8 @@
return 0;
}
+#ifdef X86_BTS
+
static int ptrace_bts_get_size(struct task_struct *child)
{
if (!child->thread.ds_area_msr)
@@ -826,6 +828,7 @@
ptrace_bts_write_record(tsk, &rec);
}
+#endif /* X86_BTS */
/*
* Called by kernel/ptrace.c when detaching..
@@ -839,7 +842,9 @@
clear_tsk_thread_flag(child, TIF_SYSCALL_EMU);
#endif
if (child->thread.ds_area_msr) {
+#ifdef X86_BTS
ptrace_bts_realloc(child, 0, 0);
+#endif
child->thread.debugctlmsr &= ~ds_debugctl_mask();
if (!child->thread.debugctlmsr)
clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
@@ -961,6 +966,10 @@
break;
#endif
+ /*
+ * These bits need more cooking - not enabled yet:
+ */
+#ifdef X86_BTS
case PTRACE_BTS_CONFIG:
ret = ptrace_bts_config
(child, data, (struct ptrace_bts_config __user *)addr);
@@ -988,6 +997,7 @@
ret = ptrace_bts_drain
(child, data, (struct bts_struct __user *) addr);
break;
+#endif
default:
ret = ptrace_request(child, request, addr, data);
@@ -1226,12 +1236,14 @@
case PTRACE_SETOPTIONS:
case PTRACE_SET_THREAD_AREA:
case PTRACE_GET_THREAD_AREA:
+#ifdef X86_BTS
case PTRACE_BTS_CONFIG:
case PTRACE_BTS_STATUS:
case PTRACE_BTS_SIZE:
case PTRACE_BTS_GET:
case PTRACE_BTS_CLEAR:
case PTRACE_BTS_DRAIN:
+#endif
return sys_ptrace(request, pid, addr, data);
default:
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index 6fd804f..7637dc9 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -1021,7 +1021,7 @@
/* Clear all flags overriden by options */
for (i = 0; i < NCAPINTS; i++)
- c->x86_capability[i] ^= cleared_cpu_caps[i];
+ c->x86_capability[i] &= ~cleared_cpu_caps[i];
#ifdef CONFIG_X86_MCE
mcheck_init(c);
diff --git a/arch/x86/kernel/smpboot_64.c b/arch/x86/kernel/smpboot_64.c
index d53bd6f..0880f2c 100644
--- a/arch/x86/kernel/smpboot_64.c
+++ b/arch/x86/kernel/smpboot_64.c
@@ -554,10 +554,10 @@
int timeout;
unsigned long start_rip;
struct create_idle c_idle = {
- .work = __WORK_INITIALIZER(c_idle.work, do_fork_idle),
.cpu = cpu,
.done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
};
+ INIT_WORK(&c_idle.work, do_fork_idle);
/* allocate memory for gdts of secondary cpus. Hotplug is considered */
if (!cpu_gdt_descr[cpu].address &&
diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c
index 02f0f61..c28c342 100644
--- a/arch/x86/kernel/stacktrace.c
+++ b/arch/x86/kernel/stacktrace.c
@@ -25,6 +25,8 @@
static void save_stack_address(void *data, unsigned long addr, int reliable)
{
struct stack_trace *trace = data;
+ if (!reliable)
+ return;
if (trace->skip > 0) {
trace->skip--;
return;
@@ -37,6 +39,8 @@
save_stack_address_nosched(void *data, unsigned long addr, int reliable)
{
struct stack_trace *trace = (struct stack_trace *)data;
+ if (!reliable)
+ return;
if (in_sched_functions(addr))
return;
if (trace->skip > 0) {
diff --git a/arch/x86/kernel/tls.c b/arch/x86/kernel/tls.c
index 6dfd4e7..022bcaa 100644
--- a/arch/x86/kernel/tls.c
+++ b/arch/x86/kernel/tls.c
@@ -91,7 +91,9 @@
asmlinkage int sys_set_thread_area(struct user_desc __user *u_info)
{
- return do_set_thread_area(current, -1, u_info, 1);
+ int ret = do_set_thread_area(current, -1, u_info, 1);
+ prevent_tail_call(ret);
+ return ret;
}
@@ -139,7 +141,9 @@
asmlinkage int sys_get_thread_area(struct user_desc __user *u_info)
{
- return do_get_thread_area(current, -1, u_info);
+ int ret = do_get_thread_area(current, -1, u_info);
+ prevent_tail_call(ret);
+ return ret;
}
int regset_tls_active(struct task_struct *target,
diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
index 43517e3..f14cfd9 100644
--- a/arch/x86/kernel/tsc_32.c
+++ b/arch/x86/kernel/tsc_32.c
@@ -28,7 +28,8 @@
static int __init tsc_setup(char *str)
{
printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
- "cannot disable TSC.\n");
+ "cannot disable TSC completely.\n");
+ mark_tsc_unstable("user disabled TSC");
return 1;
}
#else
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 3f82427..edff4c9 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -44,11 +44,6 @@
#define __vsyscall(nr) __attribute__ ((unused,__section__(".vsyscall_" #nr)))
#define __syscall_clobber "r11","cx","memory"
-#define __pa_vsymbol(x) \
- ({unsigned long v; \
- extern char __vsyscall_0; \
- asm("" : "=r" (v) : "0" (x)); \
- ((v - VSYSCALL_START) + __pa_symbol(&__vsyscall_0)); })
/*
* vsyscall_gtod_data contains data that is :
@@ -102,7 +97,7 @@
static __always_inline int gettimeofday(struct timeval *tv, struct timezone *tz)
{
int ret;
- asm volatile("vsysc2: syscall"
+ asm volatile("syscall"
: "=a" (ret)
: "0" (__NR_gettimeofday),"D" (tv),"S" (tz)
: __syscall_clobber );
@@ -112,7 +107,7 @@
static __always_inline long time_syscall(long *t)
{
long secs;
- asm volatile("vsysc1: syscall"
+ asm volatile("syscall"
: "=a" (secs)
: "0" (__NR_time),"D" (t) : __syscall_clobber);
return secs;
@@ -228,42 +223,11 @@
#ifdef CONFIG_SYSCTL
-#define SYSCALL 0x050f
-#define NOP2 0x9090
-
-/*
- * NOP out syscall in vsyscall page when not needed.
- */
-static int vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp,
- void __user *buffer, size_t *lenp, loff_t *ppos)
+static int
+vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp,
+ void __user *buffer, size_t *lenp, loff_t *ppos)
{
- extern u16 vsysc1, vsysc2;
- u16 __iomem *map1;
- u16 __iomem *map2;
- int ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
- if (!write)
- return ret;
- /* gcc has some trouble with __va(__pa()), so just do it this
- way. */
- map1 = ioremap(__pa_vsymbol(&vsysc1), 2);
- if (!map1)
- return -ENOMEM;
- map2 = ioremap(__pa_vsymbol(&vsysc2), 2);
- if (!map2) {
- ret = -ENOMEM;
- goto out;
- }
- if (!vsyscall_gtod_data.sysctl_enabled) {
- writew(SYSCALL, map1);
- writew(SYSCALL, map2);
- } else {
- writew(NOP2, map1);
- writew(NOP2, map2);
- }
- iounmap(map2);
-out:
- iounmap(map1);
- return ret;
+ return proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
}
static ctl_table kernel_table2[] = {
@@ -279,7 +243,6 @@
.child = kernel_table2 },
{}
};
-
#endif
/* Assume __initcall executes before all user space. Hopefully kmod
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 5afdde4..cccb38a 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -57,6 +57,7 @@
#include <linux/lguest_launcher.h>
#include <linux/virtio_console.h>
#include <linux/pm.h>
+#include <asm/lguest.h>
#include <asm/paravirt.h>
#include <asm/param.h>
#include <asm/page.h>
@@ -75,15 +76,6 @@
* behaving in simplified but equivalent ways. In particular, the Guest is the
* same kernel as the Host (or at least, built from the same source code). :*/
-/* Declarations for definitions in lguest_guest.S */
-extern char lguest_noirq_start[], lguest_noirq_end[];
-extern const char lgstart_cli[], lgend_cli[];
-extern const char lgstart_sti[], lgend_sti[];
-extern const char lgstart_popf[], lgend_popf[];
-extern const char lgstart_pushf[], lgend_pushf[];
-extern const char lgstart_iret[], lgend_iret[];
-extern void lguest_iret(void);
-
struct lguest_data lguest_data = {
.hcall_status = { [0 ... LHCALL_RING_SIZE-1] = 0xFF },
.noirq_start = (u32)lguest_noirq_start,
@@ -489,7 +481,7 @@
{
*pmdp = pmdval;
lazy_hcall(LHCALL_SET_PMD, __pa(pmdp)&PAGE_MASK,
- (__pa(pmdp)&(PAGE_SIZE-1))/4, 0);
+ (__pa(pmdp)&(PAGE_SIZE-1)), 0);
}
/* There are a couple of legacy places where the kernel sets a PTE, but we
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index bb652f5..a02a14f 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -172,8 +172,9 @@
}
/*
- * The head.S code sets up the kernel high mapping from:
- * __START_KERNEL_map to __START_KERNEL_map + KERNEL_TEXT_SIZE
+ * The head.S code sets up the kernel high mapping:
+ *
+ * from __START_KERNEL_map to __START_KERNEL_map + size (== _end-_text)
*
* phys_addr holds the negative offset to the kernel, which is added
* to the compile time generated pmds. This results in invalid pmds up
@@ -515,14 +516,6 @@
/* clear_bss() already clear the empty_zero_page */
- /* temporary debugging - double check it's true: */
- {
- int i;
-
- for (i = 0; i < 1024; i++)
- WARN_ON_ONCE(empty_zero_page[i]);
- }
-
reservedpages = 0;
/* this will put all low memory onto the freelists */
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 882328e..ac3c959 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -162,7 +162,7 @@
area->phys_addr = phys_addr;
vaddr = (unsigned long) area->addr;
if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) {
- remove_vm_area((void *)(vaddr & PAGE_MASK));
+ free_vm_area(area);
return NULL;
}
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 464d8fc..7049294 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -26,6 +26,7 @@
pgprot_t mask_set;
pgprot_t mask_clr;
int numpages;
+ int processed;
int flushtlb;
unsigned long pfn;
};
@@ -44,6 +45,12 @@
#endif
+#ifdef CONFIG_DEBUG_PAGEALLOC
+# define debug_pagealloc 1
+#else
+# define debug_pagealloc 0
+#endif
+
static inline int
within(unsigned long addr, unsigned long start, unsigned long end)
{
@@ -284,8 +291,8 @@
*/
nextpage_addr = (address + psize) & pmask;
numpages = (nextpage_addr - address) >> PAGE_SHIFT;
- if (numpages < cpa->numpages)
- cpa->numpages = numpages;
+ if (numpages < cpa->processed)
+ cpa->processed = numpages;
/*
* We are safe now. Check whether the new pgprot is the same:
@@ -312,7 +319,7 @@
*/
addr = address + PAGE_SIZE;
pfn++;
- for (i = 1; i < cpa->numpages; i++, addr += PAGE_SIZE, pfn++) {
+ for (i = 1; i < cpa->processed; i++, addr += PAGE_SIZE, pfn++) {
pgprot_t chk_prot = static_protections(new_prot, addr, pfn);
if (pgprot_val(chk_prot) != pgprot_val(new_prot))
@@ -336,7 +343,7 @@
* that we limited the number of possible pages already to
* the number of pages in the large page.
*/
- if (address == (nextpage_addr - psize) && cpa->numpages == numpages) {
+ if (address == (nextpage_addr - psize) && cpa->processed == numpages) {
/*
* The address is aligned and the number of pages
* covers the full page.
@@ -355,45 +362,48 @@
static LIST_HEAD(page_pool);
static unsigned long pool_size, pool_pages, pool_low;
-static unsigned long pool_used, pool_failed, pool_refill;
+static unsigned long pool_used, pool_failed;
-static void cpa_fill_pool(void)
+static void cpa_fill_pool(struct page **ret)
{
- struct page *p;
gfp_t gfp = GFP_KERNEL;
+ unsigned long flags;
+ struct page *p;
- /* Do not allocate from interrupt context */
- if (in_irq() || irqs_disabled())
- return;
/*
- * Check unlocked. I does not matter when we have one more
- * page in the pool. The bit lock avoids recursive pool
- * allocations:
+ * Avoid recursion (on debug-pagealloc) and also signal
+ * our priority to get to these pagetables:
*/
- if (pool_pages >= pool_size || test_and_set_bit_lock(0, &pool_refill))
+ if (current->flags & PF_MEMALLOC)
return;
+ current->flags |= PF_MEMALLOC;
-#ifdef CONFIG_DEBUG_PAGEALLOC
/*
- * We could do:
- * gfp = in_atomic() ? GFP_ATOMIC : GFP_KERNEL;
- * but this fails on !PREEMPT kernels
+ * Allocate atomically from atomic contexts:
*/
- gfp = GFP_ATOMIC | __GFP_NORETRY | __GFP_NOWARN;
-#endif
+ if (in_atomic() || irqs_disabled() || debug_pagealloc)
+ gfp = GFP_ATOMIC | __GFP_NORETRY | __GFP_NOWARN;
- while (pool_pages < pool_size) {
+ while (pool_pages < pool_size || (ret && !*ret)) {
p = alloc_pages(gfp, 0);
if (!p) {
pool_failed++;
break;
}
- spin_lock_irq(&pgd_lock);
+ /*
+ * If the call site needs a page right now, provide it:
+ */
+ if (ret && !*ret) {
+ *ret = p;
+ continue;
+ }
+ spin_lock_irqsave(&pgd_lock, flags);
list_add(&p->lru, &page_pool);
pool_pages++;
- spin_unlock_irq(&pgd_lock);
+ spin_unlock_irqrestore(&pgd_lock, flags);
}
- clear_bit_unlock(0, &pool_refill);
+
+ current->flags &= ~PF_MEMALLOC;
}
#define SHIFT_MB (20 - PAGE_SHIFT)
@@ -414,11 +424,15 @@
* GiB. Shift MiB to Gib and multiply the result by
* POOL_PAGES_PER_GB:
*/
- gb = ((si.totalram >> SHIFT_MB) + ROUND_MB_GB) >> SHIFT_MB_GB;
- pool_size = POOL_PAGES_PER_GB * gb;
+ if (debug_pagealloc) {
+ gb = ((si.totalram >> SHIFT_MB) + ROUND_MB_GB) >> SHIFT_MB_GB;
+ pool_size = POOL_PAGES_PER_GB * gb;
+ } else {
+ pool_size = 1;
+ }
pool_low = pool_size;
- cpa_fill_pool();
+ cpa_fill_pool(NULL);
printk(KERN_DEBUG
"CPA: page pool initialized %lu of %lu pages preallocated\n",
pool_pages, pool_size);
@@ -440,16 +454,20 @@
spin_lock_irqsave(&pgd_lock, flags);
if (list_empty(&page_pool)) {
spin_unlock_irqrestore(&pgd_lock, flags);
- return -ENOMEM;
+ base = NULL;
+ cpa_fill_pool(&base);
+ if (!base)
+ return -ENOMEM;
+ spin_lock_irqsave(&pgd_lock, flags);
+ } else {
+ base = list_first_entry(&page_pool, struct page, lru);
+ list_del(&base->lru);
+ pool_pages--;
+
+ if (pool_pages < pool_low)
+ pool_low = pool_pages;
}
- base = list_first_entry(&page_pool, struct page, lru);
- list_del(&base->lru);
- pool_pages--;
-
- if (pool_pages < pool_low)
- pool_low = pool_pages;
-
/*
* Check for races, another CPU might have split this page
* up for us already:
@@ -555,7 +573,7 @@
set_pte_atomic(kpte, new_pte);
cpa->flushtlb = 1;
}
- cpa->numpages = 1;
+ cpa->processed = 1;
return 0;
}
@@ -566,7 +584,7 @@
do_split = try_preserve_large_page(kpte, address, cpa);
/*
* When the range fits into the existing large page,
- * return. cp->numpages and cpa->tlbflush have been updated in
+ * return. cp->processed and cpa->tlbflush have been updated in
* try_large_page:
*/
if (do_split <= 0)
@@ -645,7 +663,7 @@
* Store the remaining nr of pages for the large page
* preservation check.
*/
- cpa->numpages = numpages;
+ cpa->numpages = cpa->processed = numpages;
ret = __change_page_attr(cpa, checkalias);
if (ret)
@@ -662,9 +680,9 @@
* CPA operation. Either a large page has been
* preserved or a single page update happened.
*/
- BUG_ON(cpa->numpages > numpages);
- numpages -= cpa->numpages;
- cpa->vaddr += cpa->numpages * PAGE_SIZE;
+ BUG_ON(cpa->processed > numpages);
+ numpages -= cpa->processed;
+ cpa->vaddr += cpa->processed * PAGE_SIZE;
}
return 0;
}
@@ -734,7 +752,8 @@
cpa_flush_all(cache);
out:
- cpa_fill_pool();
+ cpa_fill_pool(NULL);
+
return ret;
}
@@ -897,7 +916,7 @@
* Try to refill the page pool here. We can do this only after
* the tlb flush.
*/
- cpa_fill_pool();
+ cpa_fill_pool(NULL);
}
#ifdef CONFIG_HIBERNATION
diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index f385a4b..0a8f474 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -50,7 +50,9 @@
sed-vdsosym := -e 's/^00*/0/' \
-e 's/^\([0-9a-fA-F]*\) . \(VDSO[a-zA-Z0-9_]*\)$$/\2 = 0x\1;/p'
quiet_cmd_vdsosym = VDSOSYM $@
- cmd_vdsosym = $(NM) $< | sed -n $(sed-vdsosym) | LC_ALL=C sort > $@
+define cmd_vdsosym
+ $(NM) $< | LC_ALL=C sed -n $(sed-vdsosym) | LC_ALL=C sort > $@
+endef
$(obj)/%-syms.lds: $(obj)/%.so.dbg FORCE
$(call if_changed,vdsosym)
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 49e5358..8b9ee27 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -153,6 +153,7 @@
if (*ax == 1)
maskedx = ~((1 << X86_FEATURE_APIC) | /* disable APIC */
(1 << X86_FEATURE_ACPI) | /* disable ACPI */
+ (1 << X86_FEATURE_SEP) | /* disable SEP */
(1 << X86_FEATURE_ACC)); /* thermal monitoring */
asm(XEN_EMULATE_PREFIX "cpuid"
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6dd12f7..1db93b6 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -85,6 +85,7 @@
board_ahci_ign_iferr = 2,
board_ahci_sb600 = 3,
board_ahci_mv = 4,
+ board_ahci_sb700 = 5,
/* global controller registers */
HOST_CAP = 0x00, /* host capabilities */
@@ -442,6 +443,16 @@
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
+ /* board_ahci_sb700 */
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
+ AHCI_HFLAG_NO_PMP),
+ .flags = AHCI_FLAG_COMMON,
+ .link_flags = AHCI_LFLAG_COMMON,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
};
static const struct pci_device_id ahci_pci_tbl[] = {
@@ -484,12 +495,12 @@
/* ATI */
{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
- { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700/800 */
- { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb600 }, /* ATI SB700/800 */
- { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb600 }, /* ATI SB700/800 */
- { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb600 }, /* ATI SB700/800 */
- { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb600 }, /* ATI SB700/800 */
- { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb600 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb700 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
/* VIA */
{ PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4cf8662..4fbcce7 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -113,7 +113,7 @@
module_param(atapi_enabled, int, 0444);
MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
-int atapi_dmadir = 0;
+static int atapi_dmadir = 0;
module_param(atapi_dmadir, int, 0444);
MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)");
@@ -153,7 +153,7 @@
/**
* ata_force_cbl - force cable type according to libata.force
- * @link: ATA link of interest
+ * @ap: ATA port of interest
*
* Force cable type according to libata.force and whine about it.
* The last entry which has matching port number is used, so it
@@ -2396,6 +2396,7 @@
else if (dev->class == ATA_DEV_ATAPI) {
const char *cdb_intr_string = "";
const char *atapi_an_string = "";
+ const char *dma_dir_string = "";
u32 sntf;
rc = atapi_cdb_len(id);
@@ -2436,13 +2437,19 @@
cdb_intr_string = ", CDB intr";
}
+ if (atapi_dmadir || atapi_id_dmadir(dev->id)) {
+ dev->flags |= ATA_DFLAG_DMADIR;
+ dma_dir_string = ", DMADIR";
+ }
+
/* print device info to dmesg */
if (ata_msg_drv(ap) && print_info)
ata_dev_printk(dev, KERN_INFO,
- "ATAPI: %s, %s, max %s%s%s\n",
+ "ATAPI: %s, %s, max %s%s%s%s\n",
modelbuf, fwrevbuf,
ata_mode_string(xfer_mask),
- cdb_intr_string, atapi_an_string);
+ cdb_intr_string, atapi_an_string,
+ dma_dir_string);
}
/* determine max_sectors */
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index caef2bb..d91f509 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -35,7 +35,7 @@
ata_tf_init(pmp_dev, &tf);
tf.command = ATA_CMD_PMP_READ;
tf.protocol = ATA_PROT_NODATA;
- tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48;
tf.feature = reg;
tf.device = link->pmp;
@@ -71,7 +71,7 @@
ata_tf_init(pmp_dev, &tf);
tf.command = ATA_CMD_PMP_WRITE;
tf.protocol = ATA_PROT_NODATA;
- tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48;
tf.feature = reg;
tf.device = link->pmp;
tf.nsect = val & 0xff;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index f888bab..7b1f1ee 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1694,12 +1694,17 @@
u8 *rbuf;
unsigned int buflen, rc;
struct scsi_cmnd *cmd = args->cmd;
+ unsigned long flags;
+
+ local_irq_save(flags);
buflen = ata_scsi_rbuf_get(cmd, &rbuf);
memset(rbuf, 0, buflen);
rc = actor(args, rbuf, buflen);
ata_scsi_rbuf_put(cmd, rbuf);
+ local_irq_restore(flags);
+
if (rc == 0)
cmd->result = SAM_STAT_GOOD;
args->done(cmd);
@@ -2473,6 +2478,9 @@
if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) {
u8 *buf = NULL;
unsigned int buflen;
+ unsigned long flags;
+
+ local_irq_save(flags);
buflen = ata_scsi_rbuf_get(cmd, &buf);
@@ -2490,6 +2498,8 @@
}
ata_scsi_rbuf_put(cmd, buf);
+
+ local_irq_restore(flags);
}
cmd->result = SAM_STAT_GOOD;
@@ -2582,7 +2592,8 @@
qc->tf.protocol = ATAPI_PROT_DMA;
qc->tf.feature |= ATAPI_PKT_DMA;
- if (atapi_dmadir && (scmd->sc_data_direction != DMA_TO_DEVICE))
+ if ((dev->flags & ATA_DFLAG_DMADIR) &&
+ (scmd->sc_data_direction != DMA_TO_DEVICE))
/* some SATA bridges need us to indicate data xfer direction */
qc->tf.feature |= ATAPI_DMADIR;
}
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 6036ded..aa884f7 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -56,7 +56,6 @@
extern unsigned int ata_print_id;
extern struct workqueue_struct *ata_aux_wq;
extern int atapi_enabled;
-extern int atapi_dmadir;
extern int atapi_passthru16;
extern int libata_fua;
extern int libata_noacpi;
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 9623f52..408bdc1 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -227,7 +227,7 @@
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
+ .sg_tablesize = LIBATA_DUMB_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
@@ -259,7 +259,7 @@
.bmdma_stop = atiixp_bmdma_stop,
.bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
+ .qc_prep = ata_dumb_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 9323dd0..07791a7 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -335,7 +335,7 @@
dma_addr_t indirect_ext_segment_paddr;
unsigned int si;
- VPRINTK("SATA FSL : cd = 0x%x, prd = 0x%x\n", cmd_desc, prd);
+ VPRINTK("SATA FSL : cd = 0x%p, prd = 0x%p\n", cmd_desc, prd);
indirect_ext_segment_paddr = cmd_desc_paddr +
SATA_FSL_CMD_DESC_OFFSET_TO_PRDT + SATA_FSL_MAX_PRD_DIRECT * 16;
@@ -459,7 +459,8 @@
VPRINTK("CE=0x%x, DE=0x%x, CC=0x%x, CmdStat = 0x%x\n",
ioread32(CE + hcr_base),
ioread32(DE + hcr_base),
- ioread32(CC + hcr_base), ioread32(COMMANDSTAT + csr_base));
+ ioread32(CC + hcr_base),
+ ioread32(COMMANDSTAT + host_priv->csr_base));
return 0;
}
@@ -522,7 +523,8 @@
ioread32(CQ + hcr_base),
ioread32(CA + hcr_base),
ioread32(CE + hcr_base), ioread32(DE + hcr_base));
- VPRINTK("CmdStat = 0x%x\n", ioread32(csr_base + COMMANDSTAT));
+ VPRINTK("CmdStat = 0x%x\n",
+ ioread32(host_priv->csr_base + COMMANDSTAT));
/* disable interrupts on the controller/port */
temp = ioread32(hcr_base + HCONTROL);
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 69f651e..840d1c4 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -45,6 +45,8 @@
#include <linux/interrupt.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi.h>
#include <linux/libata.h>
#ifdef CONFIG_PPC_OF
@@ -59,6 +61,7 @@
/* ap->flags bits */
K2_FLAG_SATA_8_PORTS = (1 << 24),
K2_FLAG_NO_ATAPI_DMA = (1 << 25),
+ K2_FLAG_BAR_POS_3 = (1 << 26),
/* Taskfile registers offsets */
K2_SATA_TF_CMD_OFFSET = 0x00,
@@ -88,8 +91,10 @@
/* Port stride */
K2_SATA_PORT_OFFSET = 0x100,
- board_svw4 = 0,
- board_svw8 = 1,
+ chip_svw4 = 0,
+ chip_svw8 = 1,
+ chip_svw42 = 2, /* bar 3 */
+ chip_svw43 = 3, /* bar 5 */
};
static u8 k2_stat_check_status(struct ata_port *ap);
@@ -97,10 +102,25 @@
static int k2_sata_check_atapi_dma(struct ata_queued_cmd *qc)
{
+ u8 cmnd = qc->scsicmd->cmnd[0];
+
if (qc->ap->flags & K2_FLAG_NO_ATAPI_DMA)
return -1; /* ATAPI DMA not supported */
+ else {
+ switch (cmnd) {
+ case READ_10:
+ case READ_12:
+ case READ_16:
+ case WRITE_10:
+ case WRITE_12:
+ case WRITE_16:
+ return 0;
- return 0;
+ default:
+ return -1;
+ }
+
+ }
}
static int k2_sata_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
@@ -354,7 +374,7 @@
};
static const struct ata_port_info k2_port_info[] = {
- /* board_svw4 */
+ /* chip_svw4 */
{
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA,
@@ -363,7 +383,7 @@
.udma_mask = ATA_UDMA6,
.port_ops = &k2_sata_ops,
},
- /* board_svw8 */
+ /* chip_svw8 */
{
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA |
@@ -373,6 +393,24 @@
.udma_mask = ATA_UDMA6,
.port_ops = &k2_sata_ops,
},
+ /* chip_svw42 */
+ {
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | K2_FLAG_BAR_POS_3,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &k2_sata_ops,
+ },
+ /* chip_svw43 */
+ {
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &k2_sata_ops,
+ },
};
static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base)
@@ -402,7 +440,7 @@
{ &k2_port_info[ent->driver_data], NULL };
struct ata_host *host;
void __iomem *mmio_base;
- int n_ports, i, rc;
+ int n_ports, i, rc, bar_pos;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
@@ -416,6 +454,9 @@
if (!host)
return -ENOMEM;
+ bar_pos = 5;
+ if (ppi[0]->flags & K2_FLAG_BAR_POS_3)
+ bar_pos = 3;
/*
* If this driver happens to only be useful on Apple's K2, then
* we should check that here as it has a normal Serverworks ID
@@ -428,17 +469,23 @@
* Check if we have resources mapped at all (second function may
* have been disabled by firmware)
*/
- if (pci_resource_len(pdev, 5) == 0)
+ if (pci_resource_len(pdev, bar_pos) == 0) {
+ /* In IDE mode we need to pin the device to ensure that
+ pcim_release does not clear the busmaster bit in config
+ space, clearing causes busmaster DMA to fail on
+ ports 3 & 4 */
+ pcim_pin_device(pdev);
return -ENODEV;
+ }
/* Request and iomap PCI regions */
- rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
+ rc = pcim_iomap_regions(pdev, 1 << bar_pos, DRV_NAME);
if (rc == -EBUSY)
pcim_pin_device(pdev);
if (rc)
return rc;
host->iomap = pcim_iomap_table(pdev);
- mmio_base = host->iomap[5];
+ mmio_base = host->iomap[bar_pos];
/* different controllers have different number of ports - currently 4 or 8 */
/* All ports are on the same function. Multi-function device is no
@@ -483,11 +530,13 @@
* controller
* */
static const struct pci_device_id k2_sata_pci_tbl[] = {
- { PCI_VDEVICE(SERVERWORKS, 0x0240), board_svw4 },
- { PCI_VDEVICE(SERVERWORKS, 0x0241), board_svw4 },
- { PCI_VDEVICE(SERVERWORKS, 0x0242), board_svw8 },
- { PCI_VDEVICE(SERVERWORKS, 0x024a), board_svw4 },
- { PCI_VDEVICE(SERVERWORKS, 0x024b), board_svw4 },
+ { PCI_VDEVICE(SERVERWORKS, 0x0240), chip_svw4 },
+ { PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw4 },
+ { PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw8 },
+ { PCI_VDEVICE(SERVERWORKS, 0x024a), chip_svw4 },
+ { PCI_VDEVICE(SERVERWORKS, 0x024b), chip_svw4 },
+ { PCI_VDEVICE(SERVERWORKS, 0x0410), chip_svw42 },
+ { PCI_VDEVICE(SERVERWORKS, 0x0411), chip_svw43 },
{ }
};
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index 78b151c..5c3142b 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -110,8 +110,8 @@
#define hpet_set_rtc_irq_bit(arg) 0
#define hpet_rtc_timer_init() do { } while (0)
#define hpet_rtc_dropped_irq() 0
-#define hpet_register_irq_handler(h) 0
-#define hpet_unregister_irq_handler(h) 0
+#define hpet_register_irq_handler(h) ({ 0; })
+#define hpet_unregister_irq_handler(h) ({ 0; })
#ifdef RTC_IRQ
static irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
{
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index fea2d3e..85e2ba7 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -47,7 +47,7 @@
static struct cn_dev cdev;
-int cn_already_initialized = 0;
+static int cn_already_initialized;
/*
* msg->seq and msg->ack are used to determine message genealogy.
diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c
index 3e97199..a034627 100644
--- a/drivers/firewire/fw-card.c
+++ b/drivers/firewire/fw-card.c
@@ -18,6 +18,7 @@
#include <linux/module.h>
#include <linux/errno.h>
+#include <linux/delay.h>
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/crc-itu-t.h>
@@ -214,17 +215,29 @@
fw_card_bm_work(struct work_struct *work)
{
struct fw_card *card = container_of(work, struct fw_card, work.work);
- struct fw_device *root;
+ struct fw_device *root_device;
+ struct fw_node *root_node, *local_node;
struct bm_data bmd;
unsigned long flags;
int root_id, new_root_id, irm_id, gap_count, generation, grace;
int do_reset = 0;
spin_lock_irqsave(&card->lock, flags);
+ local_node = card->local_node;
+ root_node = card->root_node;
+
+ if (local_node == NULL) {
+ spin_unlock_irqrestore(&card->lock, flags);
+ return;
+ }
+ fw_node_get(local_node);
+ fw_node_get(root_node);
generation = card->generation;
- root = card->root_node->data;
- root_id = card->root_node->node_id;
+ root_device = root_node->data;
+ if (root_device)
+ fw_device_get(root_device);
+ root_id = root_node->node_id;
grace = time_after(jiffies, card->reset_jiffies + DIV_ROUND_UP(HZ, 10));
if (card->bm_generation + 1 == generation ||
@@ -243,14 +256,14 @@
irm_id = card->irm_node->node_id;
if (!card->irm_node->link_on) {
- new_root_id = card->local_node->node_id;
+ new_root_id = local_node->node_id;
fw_notify("IRM has link off, making local node (%02x) root.\n",
new_root_id);
goto pick_me;
}
bmd.lock.arg = cpu_to_be32(0x3f);
- bmd.lock.data = cpu_to_be32(card->local_node->node_id);
+ bmd.lock.data = cpu_to_be32(local_node->node_id);
spin_unlock_irqrestore(&card->lock, flags);
@@ -267,12 +280,12 @@
* Another bus reset happened. Just return,
* the BM work has been rescheduled.
*/
- return;
+ goto out;
}
if (bmd.rcode == RCODE_COMPLETE && bmd.old != 0x3f)
/* Somebody else is BM, let them do the work. */
- return;
+ goto out;
spin_lock_irqsave(&card->lock, flags);
if (bmd.rcode != RCODE_COMPLETE) {
@@ -282,7 +295,7 @@
* do a bus reset and pick the local node as
* root, and thus, IRM.
*/
- new_root_id = card->local_node->node_id;
+ new_root_id = local_node->node_id;
fw_notify("BM lock failed, making local node (%02x) root.\n",
new_root_id);
goto pick_me;
@@ -295,7 +308,7 @@
*/
spin_unlock_irqrestore(&card->lock, flags);
schedule_delayed_work(&card->work, DIV_ROUND_UP(HZ, 10));
- return;
+ goto out;
}
/*
@@ -305,20 +318,20 @@
*/
card->bm_generation = generation;
- if (root == NULL) {
+ if (root_device == NULL) {
/*
* Either link_on is false, or we failed to read the
* config rom. In either case, pick another root.
*/
- new_root_id = card->local_node->node_id;
- } else if (atomic_read(&root->state) != FW_DEVICE_RUNNING) {
+ new_root_id = local_node->node_id;
+ } else if (atomic_read(&root_device->state) != FW_DEVICE_RUNNING) {
/*
* If we haven't probed this device yet, bail out now
* and let's try again once that's done.
*/
spin_unlock_irqrestore(&card->lock, flags);
- return;
- } else if (root->config_rom[2] & BIB_CMC) {
+ goto out;
+ } else if (root_device->config_rom[2] & BIB_CMC) {
/*
* FIXME: I suppose we should set the cmstr bit in the
* STATE_CLEAR register of this node, as described in
@@ -332,7 +345,7 @@
* successfully read the config rom, but it's not
* cycle master capable.
*/
- new_root_id = card->local_node->node_id;
+ new_root_id = local_node->node_id;
}
pick_me:
@@ -341,8 +354,8 @@
* the typically much larger 1394b beta repeater delays though.
*/
if (!card->beta_repeaters_present &&
- card->root_node->max_hops < ARRAY_SIZE(gap_count_table))
- gap_count = gap_count_table[card->root_node->max_hops];
+ root_node->max_hops < ARRAY_SIZE(gap_count_table))
+ gap_count = gap_count_table[root_node->max_hops];
else
gap_count = 63;
@@ -364,6 +377,11 @@
fw_send_phy_config(card, new_root_id, generation, gap_count);
fw_core_initiate_bus_reset(card, 1);
}
+ out:
+ if (root_device)
+ fw_device_put(root_device);
+ fw_node_put(root_node);
+ fw_node_put(local_node);
}
static void
@@ -381,6 +399,7 @@
static atomic_t index = ATOMIC_INIT(-1);
kref_init(&card->kref);
+ atomic_set(&card->device_count, 0);
card->index = atomic_inc_return(&index);
card->driver = driver;
card->device = device;
@@ -511,8 +530,14 @@
card->driver = &dummy_driver;
fw_destroy_nodes(card);
- flush_scheduled_work();
+ /*
+ * Wait for all device workqueue jobs to finish. Otherwise the
+ * firewire-core module could be unloaded before the jobs ran.
+ */
+ while (atomic_read(&card->device_count) > 0)
+ msleep(100);
+ cancel_delayed_work_sync(&card->work);
fw_flush_transactions(card);
del_timer_sync(&card->flush_timer);
diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c
index 7e73cba..46bc197 100644
--- a/drivers/firewire/fw-cdev.c
+++ b/drivers/firewire/fw-cdev.c
@@ -109,15 +109,17 @@
struct client *client;
unsigned long flags;
- device = fw_device_from_devt(inode->i_rdev);
+ device = fw_device_get_by_devt(inode->i_rdev);
if (device == NULL)
return -ENODEV;
client = kzalloc(sizeof(*client), GFP_KERNEL);
- if (client == NULL)
+ if (client == NULL) {
+ fw_device_put(device);
return -ENOMEM;
+ }
- client->device = fw_device_get(device);
+ client->device = device;
INIT_LIST_HEAD(&client->event_list);
INIT_LIST_HEAD(&client->resource_list);
spin_lock_init(&client->lock);
@@ -644,6 +646,10 @@
struct fw_cdev_create_iso_context *request = buffer;
struct fw_iso_context *context;
+ /* We only support one context at this time. */
+ if (client->iso_context != NULL)
+ return -EBUSY;
+
if (request->channel > 63)
return -EINVAL;
@@ -790,8 +796,9 @@
{
struct fw_cdev_start_iso *request = buffer;
- if (request->handle != 0)
+ if (client->iso_context == NULL || request->handle != 0)
return -EINVAL;
+
if (client->iso_context->type == FW_ISO_CONTEXT_RECEIVE) {
if (request->tags == 0 || request->tags > 15)
return -EINVAL;
@@ -808,7 +815,7 @@
{
struct fw_cdev_stop_iso *request = buffer;
- if (request->handle != 0)
+ if (client->iso_context == NULL || request->handle != 0)
return -EINVAL;
return fw_iso_context_stop(client->iso_context);
diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c
index de9066e..870125a 100644
--- a/drivers/firewire/fw-device.c
+++ b/drivers/firewire/fw-device.c
@@ -150,21 +150,10 @@
};
EXPORT_SYMBOL(fw_bus_type);
-struct fw_device *fw_device_get(struct fw_device *device)
-{
- get_device(&device->device);
-
- return device;
-}
-
-void fw_device_put(struct fw_device *device)
-{
- put_device(&device->device);
-}
-
static void fw_device_release(struct device *dev)
{
struct fw_device *device = fw_device(dev);
+ struct fw_card *card = device->card;
unsigned long flags;
/*
@@ -176,9 +165,9 @@
spin_unlock_irqrestore(&device->card->lock, flags);
fw_node_put(device->node);
- fw_card_put(device->card);
kfree(device->config_rom);
kfree(device);
+ atomic_dec(&card->device_count);
}
int fw_device_enable_phys_dma(struct fw_device *device)
@@ -358,12 +347,9 @@
guid_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct fw_device *device = fw_device(dev);
- u64 guid;
- guid = ((u64)device->config_rom[3] << 32) | device->config_rom[4];
-
- return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
- (unsigned long long)guid);
+ return snprintf(buf, PAGE_SIZE, "0x%08x%08x\n",
+ device->config_rom[3], device->config_rom[4]);
}
static struct device_attribute fw_device_attributes[] = {
@@ -610,12 +596,14 @@
static DEFINE_IDR(fw_device_idr);
int fw_cdev_major;
-struct fw_device *fw_device_from_devt(dev_t devt)
+struct fw_device *fw_device_get_by_devt(dev_t devt)
{
struct fw_device *device;
down_read(&idr_rwsem);
device = idr_find(&fw_device_idr, MINOR(devt));
+ if (device)
+ fw_device_get(device);
up_read(&idr_rwsem);
return device;
@@ -627,13 +615,14 @@
container_of(work, struct fw_device, work.work);
int minor = MINOR(device->device.devt);
- down_write(&idr_rwsem);
- idr_remove(&fw_device_idr, minor);
- up_write(&idr_rwsem);
-
fw_device_cdev_remove(device);
device_for_each_child(&device->device, NULL, shutdown_unit);
device_unregister(&device->device);
+
+ down_write(&idr_rwsem);
+ idr_remove(&fw_device_idr, minor);
+ up_write(&idr_rwsem);
+ fw_device_put(device);
}
static struct device_type fw_device_type = {
@@ -668,7 +657,8 @@
*/
if (read_bus_info_block(device, device->generation) < 0) {
- if (device->config_rom_retries < MAX_RETRIES) {
+ if (device->config_rom_retries < MAX_RETRIES &&
+ atomic_read(&device->state) == FW_DEVICE_INITIALIZING) {
device->config_rom_retries++;
schedule_delayed_work(&device->work, RETRY_DELAY);
} else {
@@ -682,10 +672,13 @@
}
err = -ENOMEM;
+
+ fw_device_get(device);
down_write(&idr_rwsem);
if (idr_pre_get(&fw_device_idr, GFP_KERNEL))
err = idr_get_new(&fw_device_idr, device, &minor);
up_write(&idr_rwsem);
+
if (err < 0)
goto error;
@@ -717,13 +710,22 @@
*/
if (atomic_cmpxchg(&device->state,
FW_DEVICE_INITIALIZING,
- FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
+ FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) {
fw_device_shutdown(&device->work.work);
- else
- fw_notify("created new fw device %s "
- "(%d config rom retries, S%d00)\n",
- device->device.bus_id, device->config_rom_retries,
- 1 << device->max_speed);
+ } else {
+ if (device->config_rom_retries)
+ fw_notify("created device %s: GUID %08x%08x, S%d00, "
+ "%d config ROM retries\n",
+ device->device.bus_id,
+ device->config_rom[3], device->config_rom[4],
+ 1 << device->max_speed,
+ device->config_rom_retries);
+ else
+ fw_notify("created device %s: GUID %08x%08x, S%d00\n",
+ device->device.bus_id,
+ device->config_rom[3], device->config_rom[4],
+ 1 << device->max_speed);
+ }
/*
* Reschedule the IRM work if we just finished reading the
@@ -741,7 +743,9 @@
idr_remove(&fw_device_idr, minor);
up_write(&idr_rwsem);
error:
- put_device(&device->device);
+ fw_device_put(device); /* fw_device_idr's reference */
+
+ put_device(&device->device); /* our reference */
}
static int update_unit(struct device *dev, void *data)
@@ -791,7 +795,8 @@
*/
device_initialize(&device->device);
atomic_set(&device->state, FW_DEVICE_INITIALIZING);
- device->card = fw_card_get(card);
+ atomic_inc(&card->device_count);
+ device->card = card;
device->node = fw_node_get(node);
device->node_id = node->node_id;
device->generation = card->generation;
diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h
index 0854fe2..78ecd39 100644
--- a/drivers/firewire/fw-device.h
+++ b/drivers/firewire/fw-device.h
@@ -76,14 +76,26 @@
return atomic_read(&device->state) == FW_DEVICE_SHUTDOWN;
}
-struct fw_device *fw_device_get(struct fw_device *device);
-void fw_device_put(struct fw_device *device);
+static inline struct fw_device *
+fw_device_get(struct fw_device *device)
+{
+ get_device(&device->device);
+
+ return device;
+}
+
+static inline void
+fw_device_put(struct fw_device *device)
+{
+ put_device(&device->device);
+}
+
+struct fw_device *fw_device_get_by_devt(dev_t devt);
int fw_device_enable_phys_dma(struct fw_device *device);
void fw_device_cdev_update(struct fw_device *device);
void fw_device_cdev_remove(struct fw_device *device);
-struct fw_device *fw_device_from_devt(dev_t devt);
extern int fw_cdev_major;
struct fw_unit {
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index 19ece9b..03069a4 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -28,14 +28,15 @@
* and many others.
*/
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/mod_devicetable.h>
-#include <linux/device.h>
#include <linux/scatterlist.h>
-#include <linux/dma-mapping.h>
-#include <linux/blkdev.h>
#include <linux/string.h>
#include <linux/stringify.h>
#include <linux/timer.h>
@@ -47,9 +48,9 @@
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
-#include "fw-transaction.h"
-#include "fw-topology.h"
#include "fw-device.h"
+#include "fw-topology.h"
+#include "fw-transaction.h"
/*
* So far only bridges from Oxford Semiconductor are known to support
@@ -82,6 +83,9 @@
* Avoids access beyond actual disk limits on devices with an off-by-one bug.
* Don't use this with devices which don't have this bug.
*
+ * - delay inquiry
+ * Wait extra SBP2_INQUIRY_DELAY seconds after login before SCSI inquiry.
+ *
* - override internal blacklist
* Instead of adding to the built-in blacklist, use only the workarounds
* specified in the module load parameter.
@@ -91,6 +95,8 @@
#define SBP2_WORKAROUND_INQUIRY_36 0x2
#define SBP2_WORKAROUND_MODE_SENSE_8 0x4
#define SBP2_WORKAROUND_FIX_CAPACITY 0x8
+#define SBP2_WORKAROUND_DELAY_INQUIRY 0x10
+#define SBP2_INQUIRY_DELAY 12
#define SBP2_WORKAROUND_OVERRIDE 0x100
static int sbp2_param_workarounds;
@@ -100,6 +106,7 @@
", 36 byte inquiry = " __stringify(SBP2_WORKAROUND_INQUIRY_36)
", skip mode page 8 = " __stringify(SBP2_WORKAROUND_MODE_SENSE_8)
", fix capacity = " __stringify(SBP2_WORKAROUND_FIX_CAPACITY)
+ ", delay inquiry = " __stringify(SBP2_WORKAROUND_DELAY_INQUIRY)
", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
", or a combination)");
@@ -115,7 +122,6 @@
struct sbp2_logical_unit {
struct sbp2_target *tgt;
struct list_head link;
- struct scsi_device *sdev;
struct fw_address_handler address_handler;
struct list_head orb_list;
@@ -132,6 +138,8 @@
int generation;
int retries;
struct delayed_work work;
+ bool has_sdev;
+ bool blocked;
};
/*
@@ -141,16 +149,18 @@
struct sbp2_target {
struct kref kref;
struct fw_unit *unit;
+ const char *bus_id;
+ struct list_head lu_list;
u64 management_agent_address;
int directory_id;
int node_id;
int address_high;
-
- unsigned workarounds;
- struct list_head lu_list;
-
+ unsigned int workarounds;
unsigned int mgt_orb_timeout;
+
+ int dont_block; /* counter for each logical unit */
+ int blocked; /* ditto */
};
/*
@@ -160,7 +170,7 @@
*/
#define SBP2_MIN_LOGIN_ORB_TIMEOUT 5000U /* Timeout in ms */
#define SBP2_MAX_LOGIN_ORB_TIMEOUT 40000U /* Timeout in ms */
-#define SBP2_ORB_TIMEOUT 2000 /* Timeout in ms */
+#define SBP2_ORB_TIMEOUT 2000U /* Timeout in ms */
#define SBP2_ORB_NULL 0x80000000
#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000
@@ -297,7 +307,7 @@
static const struct {
u32 firmware_revision;
u32 model;
- unsigned workarounds;
+ unsigned int workarounds;
} sbp2_workarounds_table[] = {
/* DViCO Momobay CX-1 with TSB42AA9 bridge */ {
.firmware_revision = 0x002800,
@@ -305,6 +315,11 @@
.workarounds = SBP2_WORKAROUND_INQUIRY_36 |
SBP2_WORKAROUND_MODE_SENSE_8,
},
+ /* DViCO Momobay FX-3A with TSB42AA9A bridge */ {
+ .firmware_revision = 0x002800,
+ .model = 0x000000,
+ .workarounds = SBP2_WORKAROUND_DELAY_INQUIRY,
+ },
/* Initio bridges, actually only needed for some older ones */ {
.firmware_revision = 0x000200,
.model = ~0,
@@ -501,6 +516,9 @@
unsigned int timeout;
int retval = -ENOMEM;
+ if (function == SBP2_LOGOUT_REQUEST && fw_device_is_shutdown(device))
+ return 0;
+
orb = kzalloc(sizeof(*orb), GFP_ATOMIC);
if (orb == NULL)
return -ENOMEM;
@@ -553,20 +571,20 @@
retval = -EIO;
if (sbp2_cancel_orbs(lu) == 0) {
- fw_error("orb reply timed out, rcode=0x%02x\n",
- orb->base.rcode);
+ fw_error("%s: orb reply timed out, rcode=0x%02x\n",
+ lu->tgt->bus_id, orb->base.rcode);
goto out;
}
if (orb->base.rcode != RCODE_COMPLETE) {
- fw_error("management write failed, rcode 0x%02x\n",
- orb->base.rcode);
+ fw_error("%s: management write failed, rcode 0x%02x\n",
+ lu->tgt->bus_id, orb->base.rcode);
goto out;
}
if (STATUS_GET_RESPONSE(orb->status) != 0 ||
STATUS_GET_SBP_STATUS(orb->status) != 0) {
- fw_error("error status: %d:%d\n",
+ fw_error("%s: error status: %d:%d\n", lu->tgt->bus_id,
STATUS_GET_RESPONSE(orb->status),
STATUS_GET_SBP_STATUS(orb->status));
goto out;
@@ -590,29 +608,158 @@
static void
complete_agent_reset_write(struct fw_card *card, int rcode,
- void *payload, size_t length, void *data)
+ void *payload, size_t length, void *done)
{
- struct fw_transaction *t = data;
-
- kfree(t);
+ complete(done);
}
-static int sbp2_agent_reset(struct sbp2_logical_unit *lu)
+static void sbp2_agent_reset(struct sbp2_logical_unit *lu)
+{
+ struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+ DECLARE_COMPLETION_ONSTACK(done);
+ struct fw_transaction t;
+ static u32 z;
+
+ fw_send_request(device->card, &t, TCODE_WRITE_QUADLET_REQUEST,
+ lu->tgt->node_id, lu->generation, device->max_speed,
+ lu->command_block_agent_address + SBP2_AGENT_RESET,
+ &z, sizeof(z), complete_agent_reset_write, &done);
+ wait_for_completion(&done);
+}
+
+static void
+complete_agent_reset_write_no_wait(struct fw_card *card, int rcode,
+ void *payload, size_t length, void *data)
+{
+ kfree(data);
+}
+
+static void sbp2_agent_reset_no_wait(struct sbp2_logical_unit *lu)
{
struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
struct fw_transaction *t;
- static u32 zero;
+ static u32 z;
- t = kzalloc(sizeof(*t), GFP_ATOMIC);
+ t = kmalloc(sizeof(*t), GFP_ATOMIC);
if (t == NULL)
- return -ENOMEM;
+ return;
fw_send_request(device->card, t, TCODE_WRITE_QUADLET_REQUEST,
lu->tgt->node_id, lu->generation, device->max_speed,
lu->command_block_agent_address + SBP2_AGENT_RESET,
- &zero, sizeof(zero), complete_agent_reset_write, t);
+ &z, sizeof(z), complete_agent_reset_write_no_wait, t);
+}
- return 0;
+static void sbp2_set_generation(struct sbp2_logical_unit *lu, int generation)
+{
+ struct fw_card *card = fw_device(lu->tgt->unit->device.parent)->card;
+ unsigned long flags;
+
+ /* serialize with comparisons of lu->generation and card->generation */
+ spin_lock_irqsave(&card->lock, flags);
+ lu->generation = generation;
+ spin_unlock_irqrestore(&card->lock, flags);
+}
+
+static inline void sbp2_allow_block(struct sbp2_logical_unit *lu)
+{
+ /*
+ * We may access dont_block without taking card->lock here:
+ * All callers of sbp2_allow_block() and all callers of sbp2_unblock()
+ * are currently serialized against each other.
+ * And a wrong result in sbp2_conditionally_block()'s access of
+ * dont_block is rather harmless, it simply misses its first chance.
+ */
+ --lu->tgt->dont_block;
+}
+
+/*
+ * Blocks lu->tgt if all of the following conditions are met:
+ * - Login, INQUIRY, and high-level SCSI setup of all of the target's
+ * logical units have been finished (indicated by dont_block == 0).
+ * - lu->generation is stale.
+ *
+ * Note, scsi_block_requests() must be called while holding card->lock,
+ * otherwise it might foil sbp2_[conditionally_]unblock()'s attempt to
+ * unblock the target.
+ */
+static void sbp2_conditionally_block(struct sbp2_logical_unit *lu)
+{
+ struct sbp2_target *tgt = lu->tgt;
+ struct fw_card *card = fw_device(tgt->unit->device.parent)->card;
+ struct Scsi_Host *shost =
+ container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+ unsigned long flags;
+
+ spin_lock_irqsave(&card->lock, flags);
+ if (!tgt->dont_block && !lu->blocked &&
+ lu->generation != card->generation) {
+ lu->blocked = true;
+ if (++tgt->blocked == 1) {
+ scsi_block_requests(shost);
+ fw_notify("blocked %s\n", lu->tgt->bus_id);
+ }
+ }
+ spin_unlock_irqrestore(&card->lock, flags);
+}
+
+/*
+ * Unblocks lu->tgt as soon as all its logical units can be unblocked.
+ * Note, it is harmless to run scsi_unblock_requests() outside the
+ * card->lock protected section. On the other hand, running it inside
+ * the section might clash with shost->host_lock.
+ */
+static void sbp2_conditionally_unblock(struct sbp2_logical_unit *lu)
+{
+ struct sbp2_target *tgt = lu->tgt;
+ struct fw_card *card = fw_device(tgt->unit->device.parent)->card;
+ struct Scsi_Host *shost =
+ container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+ unsigned long flags;
+ bool unblock = false;
+
+ spin_lock_irqsave(&card->lock, flags);
+ if (lu->blocked && lu->generation == card->generation) {
+ lu->blocked = false;
+ unblock = --tgt->blocked == 0;
+ }
+ spin_unlock_irqrestore(&card->lock, flags);
+
+ if (unblock) {
+ scsi_unblock_requests(shost);
+ fw_notify("unblocked %s\n", lu->tgt->bus_id);
+ }
+}
+
+/*
+ * Prevents future blocking of tgt and unblocks it.
+ * Note, it is harmless to run scsi_unblock_requests() outside the
+ * card->lock protected section. On the other hand, running it inside
+ * the section might clash with shost->host_lock.
+ */
+static void sbp2_unblock(struct sbp2_target *tgt)
+{
+ struct fw_card *card = fw_device(tgt->unit->device.parent)->card;
+ struct Scsi_Host *shost =
+ container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+ unsigned long flags;
+
+ spin_lock_irqsave(&card->lock, flags);
+ ++tgt->dont_block;
+ spin_unlock_irqrestore(&card->lock, flags);
+
+ scsi_unblock_requests(shost);
+}
+
+static int sbp2_lun2int(u16 lun)
+{
+ struct scsi_lun eight_bytes_lun;
+
+ memset(&eight_bytes_lun, 0, sizeof(eight_bytes_lun));
+ eight_bytes_lun.scsi_lun[0] = (lun >> 8) & 0xff;
+ eight_bytes_lun.scsi_lun[1] = lun & 0xff;
+
+ return scsilun_to_int(&eight_bytes_lun);
}
static void sbp2_release_target(struct kref *kref)
@@ -621,26 +768,31 @@
struct sbp2_logical_unit *lu, *next;
struct Scsi_Host *shost =
container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+ struct scsi_device *sdev;
struct fw_device *device = fw_device(tgt->unit->device.parent);
- list_for_each_entry_safe(lu, next, &tgt->lu_list, link) {
- if (lu->sdev)
- scsi_remove_device(lu->sdev);
+ /* prevent deadlocks */
+ sbp2_unblock(tgt);
- if (!fw_device_is_shutdown(device))
- sbp2_send_management_orb(lu, tgt->node_id,
- lu->generation, SBP2_LOGOUT_REQUEST,
- lu->login_id, NULL);
+ list_for_each_entry_safe(lu, next, &tgt->lu_list, link) {
+ sdev = scsi_device_lookup(shost, 0, 0, sbp2_lun2int(lu->lun));
+ if (sdev) {
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ }
+ sbp2_send_management_orb(lu, tgt->node_id, lu->generation,
+ SBP2_LOGOUT_REQUEST, lu->login_id, NULL);
fw_core_remove_address_handler(&lu->address_handler);
list_del(&lu->link);
kfree(lu);
}
scsi_remove_host(shost);
- fw_notify("released %s\n", tgt->unit->device.bus_id);
+ fw_notify("released %s\n", tgt->bus_id);
put_device(&tgt->unit->device);
scsi_host_put(shost);
+ fw_device_put(device);
}
static struct workqueue_struct *sbp2_wq;
@@ -666,33 +818,42 @@
{
struct sbp2_logical_unit *lu =
container_of(work, struct sbp2_logical_unit, work.work);
- struct Scsi_Host *shost =
- container_of((void *)lu->tgt, struct Scsi_Host, hostdata[0]);
+ struct sbp2_target *tgt = lu->tgt;
+ struct fw_device *device = fw_device(tgt->unit->device.parent);
+ struct Scsi_Host *shost;
struct scsi_device *sdev;
- struct scsi_lun eight_bytes_lun;
- struct fw_unit *unit = lu->tgt->unit;
- struct fw_device *device = fw_device(unit->device.parent);
struct sbp2_login_response response;
int generation, node_id, local_node_id;
+ if (fw_device_is_shutdown(device))
+ goto out;
+
generation = device->generation;
smp_rmb(); /* node_id must not be older than generation */
node_id = device->node_id;
local_node_id = device->card->node_id;
+ /* If this is a re-login attempt, log out, or we might be rejected. */
+ if (lu->has_sdev)
+ sbp2_send_management_orb(lu, device->node_id, generation,
+ SBP2_LOGOUT_REQUEST, lu->login_id, NULL);
+
if (sbp2_send_management_orb(lu, node_id, generation,
SBP2_LOGIN_REQUEST, lu->lun, &response) < 0) {
- if (lu->retries++ < 5)
+ if (lu->retries++ < 5) {
sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5));
- else
- fw_error("failed to login to %s LUN %04x\n",
- unit->device.bus_id, lu->lun);
+ } else {
+ fw_error("%s: failed to login to LUN %04x\n",
+ tgt->bus_id, lu->lun);
+ /* Let any waiting I/O fail from now on. */
+ sbp2_unblock(lu->tgt);
+ }
goto out;
}
- lu->generation = generation;
- lu->tgt->node_id = node_id;
- lu->tgt->address_high = local_node_id << 16;
+ tgt->node_id = node_id;
+ tgt->address_high = local_node_id << 16;
+ sbp2_set_generation(lu, generation);
/* Get command block agent offset and login id. */
lu->command_block_agent_address =
@@ -700,8 +861,8 @@
response.command_block_agent.low;
lu->login_id = LOGIN_RESPONSE_GET_LOGIN_ID(response);
- fw_notify("logged in to %s LUN %04x (%d retries)\n",
- unit->device.bus_id, lu->lun, lu->retries);
+ fw_notify("%s: logged in to LUN %04x (%d retries)\n",
+ tgt->bus_id, lu->lun, lu->retries);
#if 0
/* FIXME: The linux1394 sbp2 does this last step. */
@@ -711,26 +872,58 @@
PREPARE_DELAYED_WORK(&lu->work, sbp2_reconnect);
sbp2_agent_reset(lu);
- memset(&eight_bytes_lun, 0, sizeof(eight_bytes_lun));
- eight_bytes_lun.scsi_lun[0] = (lu->lun >> 8) & 0xff;
- eight_bytes_lun.scsi_lun[1] = lu->lun & 0xff;
-
- sdev = __scsi_add_device(shost, 0, 0,
- scsilun_to_int(&eight_bytes_lun), lu);
- if (IS_ERR(sdev)) {
- sbp2_send_management_orb(lu, node_id, generation,
- SBP2_LOGOUT_REQUEST, lu->login_id, NULL);
- /*
- * Set this back to sbp2_login so we fall back and
- * retry login on bus reset.
- */
- PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
- } else {
- lu->sdev = sdev;
- scsi_device_put(sdev);
+ /* This was a re-login. */
+ if (lu->has_sdev) {
+ sbp2_cancel_orbs(lu);
+ sbp2_conditionally_unblock(lu);
+ goto out;
}
+
+ if (lu->tgt->workarounds & SBP2_WORKAROUND_DELAY_INQUIRY)
+ ssleep(SBP2_INQUIRY_DELAY);
+
+ shost = container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+ sdev = __scsi_add_device(shost, 0, 0, sbp2_lun2int(lu->lun), lu);
+ /*
+ * FIXME: We are unable to perform reconnects while in sbp2_login().
+ * Therefore __scsi_add_device() will get into trouble if a bus reset
+ * happens in parallel. It will either fail or leave us with an
+ * unusable sdev. As a workaround we check for this and retry the
+ * whole login and SCSI probing.
+ */
+
+ /* Reported error during __scsi_add_device() */
+ if (IS_ERR(sdev))
+ goto out_logout_login;
+
+ /* Unreported error during __scsi_add_device() */
+ smp_rmb(); /* get current card generation */
+ if (generation != device->card->generation) {
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ goto out_logout_login;
+ }
+
+ /* No error during __scsi_add_device() */
+ lu->has_sdev = true;
+ scsi_device_put(sdev);
+ sbp2_allow_block(lu);
+ goto out;
+
+ out_logout_login:
+ smp_rmb(); /* generation may have changed */
+ generation = device->generation;
+ smp_rmb(); /* node_id must not be older than generation */
+
+ sbp2_send_management_orb(lu, device->node_id, generation,
+ SBP2_LOGOUT_REQUEST, lu->login_id, NULL);
+ /*
+ * If a bus reset happened, sbp2_update will have requeued
+ * lu->work already. Reset the work from reconnect to login.
+ */
+ PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
out:
- sbp2_target_put(lu->tgt);
+ sbp2_target_put(tgt);
}
static int sbp2_add_logical_unit(struct sbp2_target *tgt, int lun_entry)
@@ -751,10 +944,12 @@
return -ENOMEM;
}
- lu->tgt = tgt;
- lu->sdev = NULL;
- lu->lun = lun_entry & 0xffff;
- lu->retries = 0;
+ lu->tgt = tgt;
+ lu->lun = lun_entry & 0xffff;
+ lu->retries = 0;
+ lu->has_sdev = false;
+ lu->blocked = false;
+ ++tgt->dont_block;
INIT_LIST_HEAD(&lu->orb_list);
INIT_DELAYED_WORK(&lu->work, sbp2_login);
@@ -813,7 +1008,7 @@
if (timeout > tgt->mgt_orb_timeout)
fw_notify("%s: config rom contains %ds "
"management ORB timeout, limiting "
- "to %ds\n", tgt->unit->device.bus_id,
+ "to %ds\n", tgt->bus_id,
timeout / 1000,
tgt->mgt_orb_timeout / 1000);
break;
@@ -836,12 +1031,12 @@
u32 firmware_revision)
{
int i;
- unsigned w = sbp2_param_workarounds;
+ unsigned int w = sbp2_param_workarounds;
if (w)
fw_notify("Please notify linux1394-devel@lists.sourceforge.net "
"if you need the workarounds parameter for %s\n",
- tgt->unit->device.bus_id);
+ tgt->bus_id);
if (w & SBP2_WORKAROUND_OVERRIDE)
goto out;
@@ -863,8 +1058,7 @@
if (w)
fw_notify("Workarounds for %s: 0x%x "
"(firmware_revision 0x%06x, model_id 0x%06x)\n",
- tgt->unit->device.bus_id,
- w, firmware_revision, model);
+ tgt->bus_id, w, firmware_revision, model);
tgt->workarounds = w;
}
@@ -888,6 +1082,7 @@
tgt->unit = unit;
kref_init(&tgt->kref);
INIT_LIST_HEAD(&tgt->lu_list);
+ tgt->bus_id = unit->device.bus_id;
if (fw_device_enable_phys_dma(device) < 0)
goto fail_shost_put;
@@ -895,6 +1090,8 @@
if (scsi_add_host(shost, &unit->device) < 0)
goto fail_shost_put;
+ fw_device_get(device);
+
/* Initialize to values that won't match anything in our table. */
firmware_revision = 0xff000000;
model = 0xff000000;
@@ -938,10 +1135,13 @@
{
struct sbp2_logical_unit *lu =
container_of(work, struct sbp2_logical_unit, work.work);
- struct fw_unit *unit = lu->tgt->unit;
- struct fw_device *device = fw_device(unit->device.parent);
+ struct sbp2_target *tgt = lu->tgt;
+ struct fw_device *device = fw_device(tgt->unit->device.parent);
int generation, node_id, local_node_id;
+ if (fw_device_is_shutdown(device))
+ goto out;
+
generation = device->generation;
smp_rmb(); /* node_id must not be older than generation */
node_id = device->node_id;
@@ -950,10 +1150,17 @@
if (sbp2_send_management_orb(lu, node_id, generation,
SBP2_RECONNECT_REQUEST,
lu->login_id, NULL) < 0) {
- if (lu->retries++ >= 5) {
- fw_error("failed to reconnect to %s\n",
- unit->device.bus_id);
- /* Fall back and try to log in again. */
+ /*
+ * If reconnect was impossible even though we are in the
+ * current generation, fall back and try to log in again.
+ *
+ * We could check for "Function rejected" status, but
+ * looking at the bus generation as simpler and more general.
+ */
+ smp_rmb(); /* get current card generation */
+ if (generation == device->card->generation ||
+ lu->retries++ >= 5) {
+ fw_error("%s: failed to reconnect\n", tgt->bus_id);
lu->retries = 0;
PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
}
@@ -961,17 +1168,18 @@
goto out;
}
- lu->generation = generation;
- lu->tgt->node_id = node_id;
- lu->tgt->address_high = local_node_id << 16;
+ tgt->node_id = node_id;
+ tgt->address_high = local_node_id << 16;
+ sbp2_set_generation(lu, generation);
- fw_notify("reconnected to %s LUN %04x (%d retries)\n",
- unit->device.bus_id, lu->lun, lu->retries);
+ fw_notify("%s: reconnected to LUN %04x (%d retries)\n",
+ tgt->bus_id, lu->lun, lu->retries);
sbp2_agent_reset(lu);
sbp2_cancel_orbs(lu);
+ sbp2_conditionally_unblock(lu);
out:
- sbp2_target_put(lu->tgt);
+ sbp2_target_put(tgt);
}
static void sbp2_update(struct fw_unit *unit)
@@ -986,6 +1194,7 @@
* Iteration over tgt->lu_list is therefore safe here.
*/
list_for_each_entry(lu, &tgt->lu_list, link) {
+ sbp2_conditionally_block(lu);
lu->retries = 0;
sbp2_queue_work(lu, 0);
}
@@ -1063,7 +1272,7 @@
if (status != NULL) {
if (STATUS_GET_DEAD(*status))
- sbp2_agent_reset(orb->lu);
+ sbp2_agent_reset_no_wait(orb->lu);
switch (STATUS_GET_RESPONSE(*status)) {
case SBP2_STATUS_REQUEST_COMPLETE:
@@ -1089,6 +1298,7 @@
* or when sending the write (less likely).
*/
result = DID_BUS_BUSY << 16;
+ sbp2_conditionally_block(orb->lu);
}
dma_unmap_single(device->card->device, orb->base.request_bus,
@@ -1197,7 +1407,7 @@
struct sbp2_logical_unit *lu = cmd->device->hostdata;
struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
struct sbp2_command_orb *orb;
- unsigned max_payload;
+ unsigned int max_payload;
int retval = SCSI_MLQUEUE_HOST_BUSY;
/*
@@ -1275,6 +1485,10 @@
{
struct sbp2_logical_unit *lu = sdev->hostdata;
+ /* (Re-)Adding logical units via the SCSI stack is not supported. */
+ if (!lu)
+ return -ENOSYS;
+
sdev->allow_restart = 1;
/*
@@ -1319,7 +1533,7 @@
{
struct sbp2_logical_unit *lu = cmd->device->hostdata;
- fw_notify("sbp2_scsi_abort\n");
+ fw_notify("%s: sbp2_scsi_abort\n", lu->tgt->bus_id);
sbp2_agent_reset(lu);
sbp2_cancel_orbs(lu);
diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c
index 172c186..e47bb04 100644
--- a/drivers/firewire/fw-topology.c
+++ b/drivers/firewire/fw-topology.c
@@ -383,6 +383,7 @@
card->color++;
if (card->local_node != NULL)
for_each_fw_node(card, card->local_node, report_lost_node);
+ card->local_node = NULL;
spin_unlock_irqrestore(&card->lock, flags);
}
diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h
index fa7967b..09cb728 100644
--- a/drivers/firewire/fw-transaction.h
+++ b/drivers/firewire/fw-transaction.h
@@ -26,6 +26,7 @@
#include <linux/fs.h>
#include <linux/dma-mapping.h>
#include <linux/firewire-constants.h>
+#include <asm/atomic.h>
#define TCODE_IS_READ_REQUEST(tcode) (((tcode) & ~1) == 4)
#define TCODE_IS_BLOCK_PACKET(tcode) (((tcode) & 1) != 0)
@@ -219,6 +220,7 @@
struct fw_card {
const struct fw_card_driver *driver;
struct device *device;
+ atomic_t device_count;
struct kref kref;
int node_id;
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index b61f56b..476b0bb 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -177,6 +177,8 @@
ESB2
ICH8
ICH9
+ Tolapai
+ ICH10
This driver can also be built as a module. If so, the module
will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index aa91579..b0f771f 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -40,7 +40,9 @@
82801G (ICH7) 0x27da 32 hard yes yes yes
82801H (ICH8) 0x283e 32 hard yes yes yes
82801I (ICH9) 0x2930 32 hard yes yes yes
- Tolapai 0x5032 32 hard yes ? ?
+ Tolapai 0x5032 32 hard yes yes yes
+ ICH10 0x3a30 32 hard yes yes yes
+ ICH10 0x3a60 32 hard yes yes yes
Features supported by this driver:
Software PEC no
@@ -588,6 +590,8 @@
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
{ 0, }
};
@@ -608,10 +612,12 @@
case PCI_DEVICE_ID_INTEL_ESB2_17:
case PCI_DEVICE_ID_INTEL_ICH8_5:
case PCI_DEVICE_ID_INTEL_ICH9_6:
+ case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
+ case PCI_DEVICE_ID_INTEL_ICH10_4:
+ case PCI_DEVICE_ID_INTEL_ICH10_5:
i801_features |= FEATURE_I2C_BLOCK_READ;
/* fall through */
case PCI_DEVICE_ID_INTEL_82801DB_3:
- case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
i801_features |= FEATURE_SMBUS_PEC;
i801_features |= FEATURE_BLOCK_BUFFER;
break;
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 5161aaf..496ee87 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -125,6 +125,13 @@
dev_info(dev, "i/o base %#08lx. irq %d\n", base, irq);
+#ifdef CONFIG_PPC_MERGE
+ if (check_legacy_ioport(base)) {
+ dev_err(dev, "I/O address %#08lx is not available\n", base);
+ goto out;
+ }
+#endif
+
if (!request_region(base, IO_SIZE, "i2c-pca-isa")) {
dev_err(dev, "I/O address %#08lx is in use\n", base);
goto out;
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index be99c02..b03af56 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -122,7 +122,7 @@
};
/* The default settings */
-const static struct pmcmsptwi_clockcfg pmcmsptwi_defclockcfg = {
+static const struct pmcmsptwi_clockcfg pmcmsptwi_defclockcfg = {
.standard = {
.filter = 0x3,
.clock = 0x1f,
@@ -133,7 +133,7 @@
},
};
-const static struct pmcmsptwi_cfg pmcmsptwi_defcfg = {
+static const struct pmcmsptwi_cfg pmcmsptwi_defcfg = {
.arbf = 0x03,
.nak = 0x03,
.add10 = 0x00,
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 2b557bf..2d2087a 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -999,7 +999,14 @@
spin_lock_init(&i2c->lock);
init_waitqueue_head(&i2c->wait);
- sprintf(i2c->adap.name, "pxa_i2c-i2c.%u", dev->id);
+ /*
+ * If "dev->id" is negative we consider it as zero.
+ * The reason to do so is to avoid sysfs names that only make
+ * sense when there are multiple adapters.
+ */
+ i2c->adap.nr = dev->id != -1 ? dev->id : 0;
+ snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u",
+ i2c->adap.nr);
i2c->clk = clk_get(&dev->dev, "I2CCLK");
if (IS_ERR(i2c->clk)) {
@@ -1050,13 +1057,6 @@
i2c->adap.algo_data = i2c;
i2c->adap.dev.parent = &dev->dev;
- /*
- * If "dev->id" is negative we consider it as zero.
- * The reason to do so is to avoid sysfs names that only make
- * sense when there are multiple adapters.
- */
- i2c->adap.nr = dev->id != -1 ? dev->id : 0;
-
ret = i2c_add_numbered_adapter(&i2c->adap);
if (ret < 0) {
printk(KERN_INFO "I2C: Failed to add bus\n");
@@ -1080,6 +1080,7 @@
ereqirq:
clk_disable(i2c->clk);
i2c_pxa_disable(dev);
+ iounmap(i2c->reg_base);
eremap:
clk_put(i2c->clk);
eclk:
@@ -1089,7 +1090,7 @@
return ret;
}
-static int i2c_pxa_remove(struct platform_device *dev)
+static int __exit i2c_pxa_remove(struct platform_device *dev)
{
struct pxa_i2c *i2c = platform_get_drvdata(dev);
@@ -1103,6 +1104,7 @@
clk_put(i2c->clk);
i2c_pxa_disable(dev);
+ iounmap(i2c->reg_base);
release_mem_region(i2c->iobase, i2c->iosize);
kfree(i2c);
@@ -1111,9 +1113,10 @@
static struct platform_driver i2c_pxa_driver = {
.probe = i2c_pxa_probe,
- .remove = i2c_pxa_remove,
+ .remove = __exit_p(i2c_pxa_remove),
.driver = {
.name = "pxa2xx-i2c",
+ .owner = THIS_MODULE,
},
};
@@ -1122,7 +1125,7 @@
return platform_driver_register(&i2c_pxa_driver);
}
-static void i2c_adap_pxa_exit(void)
+static void __exit i2c_adap_pxa_exit(void)
{
platform_driver_unregister(&i2c_pxa_driver);
}
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 310e497..c8d0e87 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -670,8 +670,8 @@
* and attempt to recover if there are problems. Returns 0 if everything's
* ok; nonzero if the request has been terminated.
*/
-static
-int ide_cd_check_ireason(ide_drive_t *drive, int len, int ireason, int rw)
+static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
+ int len, int ireason, int rw)
{
/*
* ireason == 0: the drive wants to receive data from us
@@ -701,6 +701,9 @@
drive->name, __FUNCTION__, ireason);
}
+ if (rq->cmd_type == REQ_TYPE_ATA_PC)
+ rq->cmd_flags |= REQ_FAILED;
+
cdrom_end_request(drive, 0);
return -1;
}
@@ -1071,11 +1074,11 @@
/*
* check which way to transfer data
*/
- if (blk_fs_request(rq) || blk_pc_request(rq)) {
- if (ide_cd_check_ireason(drive, len, ireason, write))
- return ide_stopped;
+ if (ide_cd_check_ireason(drive, rq, len, ireason, write))
+ return ide_stopped;
- if (blk_fs_request(rq) && write == 0) {
+ if (blk_fs_request(rq)) {
+ if (write == 0) {
int nskip;
if (ide_cd_check_transfer_size(drive, len)) {
@@ -1101,16 +1104,9 @@
if (ireason == 0) {
write = 1;
xferfunc = HWIF(drive)->atapi_output_bytes;
- } else if (ireason == 2 || (ireason == 1 &&
- (blk_fs_request(rq) || blk_pc_request(rq)))) {
+ } else {
write = 0;
xferfunc = HWIF(drive)->atapi_input_bytes;
- } else {
- printk(KERN_ERR "%s: %s: The drive "
- "appears confused (ireason = 0x%02x). "
- "Trying to recover by ending request.\n",
- drive->name, __FUNCTION__, ireason);
- goto end_request;
}
/*
@@ -1182,11 +1178,10 @@
else
rq->data += blen;
}
+ if (!write && blk_sense_request(rq))
+ rq->sense_len += blen;
}
- if (write && blk_sense_request(rq))
- rq->sense_len += thislen;
-
/*
* pad, if necessary
*/
@@ -1931,6 +1926,7 @@
{ "MATSHITADVD-ROM SR-8186", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK },
{ "MATSHITADVD-ROM SR-8176", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK },
{ "MATSHITADVD-ROM SR-8174", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK },
+ { "Optiarc DVD RW AD-5200A", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK },
{ NULL, NULL, 0 }
};
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 8f5bed47..39501d1 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -867,7 +867,7 @@
/* Only print cache size when it was specified */
if (id->buf_size)
- printk (" w/%dKiB Cache", id->buf_size/2);
+ printk(KERN_CONT " w/%dKiB Cache", id->buf_size / 2);
printk(KERN_CONT ", CHS=%d/%d/%d\n",
drive->bios_cyl, drive->bios_head, drive->bios_sect);
@@ -949,7 +949,8 @@
return;
}
- printk("Shutdown: %s\n", drive->name);
+ printk(KERN_INFO "Shutdown: %s\n", drive->name);
+
drive->gendev.bus->suspend(&drive->gendev, PMSG_SUSPEND);
}
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index d0e7b53..2de99e4 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -1,9 +1,13 @@
/*
+ * IDE DMA support (including IDE PCI BM-DMA).
+ *
* Copyright (C) 1995-1998 Mark Lord
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2004, 2007 Bartlomiej Zolnierkiewicz
*
* May be copied or modified under the terms of the GNU General Public License
+ *
+ * DMA is supported for all IDE devices (disk drives, cdroms, tapes, floppies).
*/
/*
@@ -11,49 +15,6 @@
*/
/*
- * This module provides support for the bus-master IDE DMA functions
- * of various PCI chipsets, including the Intel PIIX (i82371FB for
- * the 430 FX chipset), the PIIX3 (i82371SB for the 430 HX/VX and
- * 440 chipsets), and the PIIX4 (i82371AB for the 430 TX chipset)
- * ("PIIX" stands for "PCI ISA IDE Xcellerator").
- *
- * Pretty much the same code works for other IDE PCI bus-mastering chipsets.
- *
- * DMA is supported for all IDE devices (disk drives, cdroms, tapes, floppies).
- *
- * By default, DMA support is prepared for use, but is currently enabled only
- * for drives which already have DMA enabled (UltraDMA or mode 2 multi/single),
- * or which are recognized as "good" (see table below). Drives with only mode0
- * or mode1 (multi/single) DMA should also work with this chipset/driver
- * (eg. MC2112A) but are not enabled by default.
- *
- * Use "hdparm -i" to view modes supported by a given drive.
- *
- * The hdparm-3.5 (or later) utility can be used for manually enabling/disabling
- * DMA support, but must be (re-)compiled against this kernel version or later.
- *
- * To enable DMA, use "hdparm -d1 /dev/hd?" on a per-drive basis after booting.
- * If problems arise, ide.c will disable DMA operation after a few retries.
- * This error recovery mechanism works and has been extremely well exercised.
- *
- * IDE drives, depending on their vintage, may support several different modes
- * of DMA operation. The boot-time modes are indicated with a "*" in
- * the "hdparm -i" listing, and can be changed with *knowledgeable* use of
- * the "hdparm -X" feature. There is seldom a need to do this, as drives
- * normally power-up with their "best" PIO/DMA modes enabled.
- *
- * Testing has been done with a rather extensive number of drives,
- * with Quantum & Western Digital models generally outperforming the pack,
- * and Fujitsu & Conner (and some Seagate which are really Conner) drives
- * showing more lackluster throughput.
- *
- * Keep an eye on /var/adm/messages for "DMA disabled" messages.
- *
- * Some people have reported trouble with Intel Zappa motherboards.
- * This can be fixed by upgrading the AMI BIOS to version 1.00.04.BS0,
- * available from ftp://ftp.intel.com/pub/bios/10004bs0.exe
- * (thanks to Glen Morrell <glen@spin.Stanford.edu> for researching this).
- *
* Thanks to "Christopher J. Reimer" <reimer@doe.carleton.ca> for
* fixing the problem with the BIOS on some Acer motherboards.
*
@@ -65,11 +26,6 @@
*
* Most importantly, thanks to Robert Bringman <rob@mars.trion.com>
* for supplying a Promise UDMA board & WD UDMA drive for this work!
- *
- * And, yes, Intel Zappa boards really *do* use both PIIX IDE ports.
- *
- * ATA-66/100 and recovery functions, I forgot the rest......
- *
*/
#include <linux/module.h>
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 4a2cb28..194ecb0 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -756,7 +756,8 @@
BUG_ON(hwif->present);
- if (hwif->noprobe)
+ if (hwif->noprobe ||
+ (hwif->drives[0].noprobe && hwif->drives[1].noprobe))
return -EACCES;
/*
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 0598ecf..43e0e05 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -3765,6 +3765,11 @@
g->fops = &idetape_block_ops;
ide_register_region(g);
+ printk(KERN_WARNING "It is possible that this driver does not have any"
+ " users anymore and, as a result, it will be REMOVED soon."
+ " Please notify Bart <bzolnier@gmail.com> or Boris"
+ " <petkovbb@gmail.com> in case you still need it.\n");
+
return 0;
out_free_tape:
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 477833f..fa16bc3 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -590,11 +590,6 @@
hwif->extra_ports = 0;
}
- /*
- * Note that we only release the standard ports,
- * and do not even try to handle any extra ports
- * allocated for weird IDE interface chipsets.
- */
ide_hwif_release_regions(hwif);
/* copy original settings */
@@ -1036,10 +1031,9 @@
drive->nice1 = (arg >> IDE_NICE_1) & 1;
return 0;
case HDIO_DRIVE_RESET:
- {
- unsigned long flags;
- if (!capable(CAP_SYS_ADMIN)) return -EACCES;
-
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
/*
* Abort the current command on the
* group if there is one, taking
@@ -1058,17 +1052,15 @@
ide_abort(drive, "drive reset");
BUG_ON(HWGROUP(drive)->handler);
-
+
/* Ensure nothing gets queued after we
drop the lock. Reset will clear the busy */
-
+
HWGROUP(drive)->busy = 1;
spin_unlock_irqrestore(&ide_lock, flags);
(void) ide_do_reset(drive);
return 0;
- }
-
case HDIO_GET_BUSSTATE:
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
@@ -1449,7 +1441,7 @@
case -1: /* "noprobe" */
hwif->noprobe = 1;
- goto done;
+ goto obsolete_option;
case 1: /* base */
vals[1] = vals[0] + 0x206; /* default ctl */
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index bba29df..2f4f47a 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -334,43 +334,6 @@
hwif->drives[1].drive_data = t2;
}
-/*
- * qd_unsetup:
- *
- * called to unsetup an ata channel : back to default values, unlinks tuning
- */
-/*
-static void __exit qd_unsetup(ide_hwif_t *hwif)
-{
- u8 config = hwif->config_data;
- int base = hwif->select_data;
- void *set_pio_mode = (void *)hwif->set_pio_mode;
-
- if (hwif->chipset != ide_qd65xx)
- return;
-
- printk(KERN_NOTICE "%s: back to defaults\n", hwif->name);
-
- hwif->selectproc = NULL;
- hwif->set_pio_mode = NULL;
-
- if (set_pio_mode == (void *)qd6500_set_pio_mode) {
- // will do it for both
- outb(QD6500_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
- } else if (set_pio_mode == (void *)qd6580_set_pio_mode) {
- if (QD_CONTROL(hwif) & QD_CONTR_SEC_DISABLED) {
- outb(QD6580_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
- outb(QD6580_DEF_DATA2, QD_TIMREG(&hwif->drives[1]));
- } else {
- outb(hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
- }
- } else {
- printk(KERN_WARNING "Unknown qd65xx tuning fonction !\n");
- printk(KERN_WARNING "keeping settings !\n");
- }
-}
-*/
-
static const struct ide_port_info qd65xx_port_info __initdata = {
.chipset = ide_qd65xx,
.host_flags = IDE_HFLAG_IO_32BIT |
@@ -444,6 +407,8 @@
printk(KERN_DEBUG "qd6580: config=%#x, control=%#x, ID3=%u\n",
config, control, QD_ID3);
+ outb(QD_DEF_CONTR, QD_CONTROL_PORT);
+
if (control & QD_CONTR_SEC_DISABLED) {
/* secondary disabled */
@@ -460,8 +425,6 @@
ide_device_add(idx, &qd65xx_port_info);
- outb(QD_DEF_CONTR, QD_CONTROL_PORT);
-
return 1;
} else {
ide_hwif_t *mate;
@@ -487,8 +450,6 @@
ide_device_add(idx, &qd65xx_port_info);
- outb(QD_DEF_CONTR, QD_CONTROL_PORT);
-
return 0; /* no other qd65xx possible */
}
}
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index bd24dad3..ec66798 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -787,7 +787,8 @@
/*
* Try to enable the secondary interface, if not already enabled
*/
- if (cmd_hwif1->noprobe) {
+ if (cmd_hwif1->noprobe ||
+ (cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe)) {
port2 = "not probed";
} else {
b = get_cmd640_reg(CNTRL);
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index d0f7bb8..6357bb6 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1570,10 +1570,12 @@
if (rev < 3)
info = &hpt36x;
else {
- static const struct hpt_info *hpt37x_info[] =
- { &hpt370, &hpt370a, &hpt372, &hpt372n };
-
- info = hpt37x_info[min_t(u8, rev, 6) - 3];
+ switch (min_t(u8, rev, 6)) {
+ case 3: info = &hpt370; break;
+ case 4: info = &hpt370a; break;
+ case 5: info = &hpt372; break;
+ case 6: info = &hpt372n; break;
+ }
idx++;
}
break;
@@ -1626,7 +1628,7 @@
return ide_setup_pci_device(dev, &d);
}
-static const struct pci_device_id hpt366_pci_tbl[] = {
+static const struct pci_device_id hpt366_pci_tbl[] __devinitconst = {
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), 0 },
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372), 1 },
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT302), 2 },
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 28e155a..9e2b1964 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -183,6 +183,9 @@
* Avoids access beyond actual disk limits on devices with an off-by-one bug.
* Don't use this with devices which don't have this bug.
*
+ * - delay inquiry
+ * Wait extra SBP2_INQUIRY_DELAY seconds after login before SCSI inquiry.
+ *
* - override internal blacklist
* Instead of adding to the built-in blacklist, use only the workarounds
* specified in the module load parameter.
@@ -195,6 +198,7 @@
", 36 byte inquiry = " __stringify(SBP2_WORKAROUND_INQUIRY_36)
", skip mode page 8 = " __stringify(SBP2_WORKAROUND_MODE_SENSE_8)
", fix capacity = " __stringify(SBP2_WORKAROUND_FIX_CAPACITY)
+ ", delay inquiry = " __stringify(SBP2_WORKAROUND_DELAY_INQUIRY)
", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
", or a combination)");
@@ -357,6 +361,11 @@
.workarounds = SBP2_WORKAROUND_INQUIRY_36 |
SBP2_WORKAROUND_MODE_SENSE_8,
},
+ /* DViCO Momobay FX-3A with TSB42AA9A bridge */ {
+ .firmware_revision = 0x002800,
+ .model_id = 0x000000,
+ .workarounds = SBP2_WORKAROUND_DELAY_INQUIRY,
+ },
/* Initio bridges, actually only needed for some older ones */ {
.firmware_revision = 0x000200,
.model_id = SBP2_ROM_VALUE_WILDCARD,
@@ -914,6 +923,9 @@
sbp2_agent_reset(lu, 1);
sbp2_max_speed_and_size(lu);
+ if (lu->workarounds & SBP2_WORKAROUND_DELAY_INQUIRY)
+ ssleep(SBP2_INQUIRY_DELAY);
+
error = scsi_add_device(lu->shost, 0, lu->ud->id, 0);
if (error) {
SBP2_ERR("scsi_add_device failed");
@@ -1962,6 +1974,9 @@
{
struct sbp2_lu *lu = (struct sbp2_lu *)sdev->host->hostdata[0];
+ if (sdev->lun != 0 || sdev->id != lu->ud->id || sdev->channel != 0)
+ return -ENODEV;
+
lu->sdev = sdev;
sdev->allow_restart = 1;
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index d2ecb0d..80d8e09 100644
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -343,6 +343,8 @@
#define SBP2_WORKAROUND_INQUIRY_36 0x2
#define SBP2_WORKAROUND_MODE_SENSE_8 0x4
#define SBP2_WORKAROUND_FIX_CAPACITY 0x8
+#define SBP2_WORKAROUND_DELAY_INQUIRY 0x10
+#define SBP2_INQUIRY_DELAY 12
#define SBP2_WORKAROUND_OVERRIDE 0x100
#endif /* SBP2_H */
diff --git a/drivers/infiniband/hw/cxgb3/iwch_mem.c b/drivers/infiniband/hw/cxgb3/iwch_mem.c
index 73bfd16..b8797c6 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_mem.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_mem.c
@@ -136,14 +136,8 @@
/* Find largest page shift we can use to cover buffers */
for (*shift = PAGE_SHIFT; *shift < 27; ++(*shift))
- if (num_phys_buf > 1) {
- if ((1ULL << *shift) & mask)
- break;
- } else
- if (1ULL << *shift >=
- buffer_list[0].size +
- (buffer_list[0].addr & ((1ULL << *shift) - 1)))
- break;
+ if ((1ULL << *shift) & mask)
+ break;
buffer_list[0].size += buffer_list[0].addr & ((1ULL << *shift) - 1);
buffer_list[0].addr &= ~0ull << *shift;
diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c
index 7f8853b..b2112f5 100644
--- a/drivers/infiniband/hw/nes/nes.c
+++ b/drivers/infiniband/hw/nes/nes.c
@@ -567,12 +567,12 @@
/* Init the adapter */
nesdev->nesadapter = nes_init_adapter(nesdev, hw_rev);
- nesdev->nesadapter->et_rx_coalesce_usecs_irq = interrupt_mod_interval;
if (!nesdev->nesadapter) {
printk(KERN_ERR PFX "Unable to initialize adapter.\n");
ret = -ENOMEM;
goto bail5;
}
+ nesdev->nesadapter->et_rx_coalesce_usecs_irq = interrupt_mod_interval;
/* nesdev->base_doorbell_index =
nesdev->nesadapter->pd_config_base[PCI_FUNC(nesdev->pcidev->devfn)]; */
diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h
index fd57e8a..a48b288 100644
--- a/drivers/infiniband/hw/nes/nes.h
+++ b/drivers/infiniband/hw/nes/nes.h
@@ -285,6 +285,21 @@
};
+static inline __le32 get_crc_value(struct nes_v4_quad *nes_quad)
+{
+ u32 crc_value;
+ crc_value = crc32c(~0, (void *)nes_quad, sizeof (struct nes_v4_quad));
+
+ /*
+ * With commit ef19454b ("[LIB] crc32c: Keep intermediate crc
+ * state in cpu order"), behavior of crc32c changes on
+ * big-endian platforms. Our algorithm expects the previous
+ * behavior; otherwise we have RDMA connection establishment
+ * issue on big-endian.
+ */
+ return cpu_to_le32(crc_value);
+}
+
static inline void
set_wqe_64bit_value(__le32 *wqe_words, u32 index, u64 value)
{
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index bd5cfea..39adb26 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -370,11 +370,11 @@
int ret = 0;
u32 was_timer_set;
+ if (!cm_node)
+ return -EINVAL;
new_send = kzalloc(sizeof(*new_send), GFP_ATOMIC);
if (!new_send)
return -1;
- if (!cm_node)
- return -EINVAL;
/* new_send->timetosend = currenttime */
new_send->retrycount = NES_DEFAULT_RETRYS;
@@ -947,6 +947,7 @@
nes_debug(NES_DBG_CM, "destroying listener (%p)\n", listener);
kfree(listener);
+ listener = NULL;
ret = 0;
cm_listens_destroyed++;
} else {
@@ -2319,6 +2320,7 @@
struct iw_cm_event cm_event;
struct nes_hw_qp_wqe *wqe;
struct nes_v4_quad nes_quad;
+ u32 crc_value;
int ret;
ibqp = nes_get_qp(cm_id->device, conn_param->qpn);
@@ -2435,8 +2437,8 @@
nes_quad.TcpPorts[1] = cm_id->local_addr.sin_port;
/* Produce hash key */
- nesqp->hte_index = cpu_to_be32(
- crc32c(~0, (void *)&nes_quad, sizeof(nes_quad)) ^ 0xffffffff);
+ crc_value = get_crc_value(&nes_quad);
+ nesqp->hte_index = cpu_to_be32(crc_value ^ 0xffffffff);
nes_debug(NES_DBG_CM, "HTE Index = 0x%08X, CRC = 0x%08X\n",
nesqp->hte_index, nesqp->hte_index & adapter->hte_index_mask);
@@ -2750,6 +2752,7 @@
struct iw_cm_event cm_event;
struct nes_hw_qp_wqe *wqe;
struct nes_v4_quad nes_quad;
+ u32 crc_value;
int ret;
/* get all our handles */
@@ -2827,8 +2830,8 @@
nes_quad.TcpPorts[1] = cm_id->local_addr.sin_port;
/* Produce hash key */
- nesqp->hte_index = cpu_to_be32(
- crc32c(~0, (void *)&nes_quad, sizeof(nes_quad)) ^ 0xffffffff);
+ crc_value = get_crc_value(&nes_quad);
+ nesqp->hte_index = cpu_to_be32(crc_value ^ 0xffffffff);
nes_debug(NES_DBG_CM, "HTE Index = 0x%08X, After CRC = 0x%08X\n",
nesqp->hte_index, nesqp->hte_index & nesadapter->hte_index_mask);
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 7c4c0fb..49e53e4 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -156,15 +156,14 @@
spin_lock_irqsave(&nesadapter->periodic_timer_lock, flags);
- if (shared_timer->cq_count_old < cq_count) {
- if (cq_count > shared_timer->threshold_low)
- shared_timer->cq_direction_downward=0;
- }
- if (shared_timer->cq_count_old >= cq_count)
+ if (shared_timer->cq_count_old <= cq_count)
+ shared_timer->cq_direction_downward = 0;
+ else
shared_timer->cq_direction_downward++;
shared_timer->cq_count_old = cq_count;
if (shared_timer->cq_direction_downward > NES_NIC_CQ_DOWNWARD_TREND) {
- if (cq_count <= shared_timer->threshold_low) {
+ if (cq_count <= shared_timer->threshold_low &&
+ shared_timer->threshold_low > 4) {
shared_timer->threshold_low = shared_timer->threshold_low/2;
shared_timer->cq_direction_downward=0;
nesdev->currcq_count = 0;
@@ -1728,7 +1727,6 @@
nesdev->int_req &= ~NES_INT_TIMER;
nes_write32(nesdev->regs+NES_INTF_INT_MASK, ~(nesdev->intf_int_req));
nes_write32(nesdev->regs+NES_INT_MASK, ~nesdev->int_req);
- nesadapter->tune_timer.timer_in_use_old = 0;
}
nesdev->deepcq_count = 0;
return 1;
@@ -1867,7 +1865,6 @@
nesdev->int_req &= ~NES_INT_TIMER;
nes_write32(nesdev->regs + NES_INTF_INT_MASK, ~(nesdev->intf_int_req));
nes_write32(nesdev->regs+NES_INT_MASK, ~nesdev->int_req);
- nesdev->nesadapter->tune_timer.timer_in_use_old = 0;
} else {
nes_write32(nesdev->regs+NES_INT_MASK, 0x0000ffff|(~nesdev->int_req));
}
diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h
index 1e10df5..b7e2844 100644
--- a/drivers/infiniband/hw/nes/nes_hw.h
+++ b/drivers/infiniband/hw/nes/nes_hw.h
@@ -962,7 +962,7 @@
#define DEFAULT_JUMBO_NES_QL_LOW 12
#define DEFAULT_JUMBO_NES_QL_TARGET 40
#define DEFAULT_JUMBO_NES_QL_HIGH 128
-#define NES_NIC_CQ_DOWNWARD_TREND 8
+#define NES_NIC_CQ_DOWNWARD_TREND 16
struct nes_hw_tune_timer {
//u16 cq_count;
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 4dafbe1..a651e9d 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -929,7 +929,7 @@
NES_MAX_USER_DB_REGIONS, nesucontext->first_free_db);
nes_debug(NES_DBG_PD, "find_first_zero_biton doorbells returned %u, mapping pd_id %u.\n",
nespd->mmap_db_index, nespd->pd_id);
- if (nespd->mmap_db_index > NES_MAX_USER_DB_REGIONS) {
+ if (nespd->mmap_db_index >= NES_MAX_USER_DB_REGIONS) {
nes_debug(NES_DBG_PD, "mmap_db_index > MAX\n");
nes_free_resource(nesadapter, nesadapter->allocated_pds, pd_num);
kfree(nespd);
@@ -1327,7 +1327,7 @@
(long long unsigned int)req.user_wqe_buffers);
nes_free_resource(nesadapter, nesadapter->allocated_qps, qp_num);
kfree(nesqp->allocated_buffer);
- return ERR_PTR(-ENOMEM);
+ return ERR_PTR(-EFAULT);
}
}
@@ -1674,6 +1674,7 @@
}
nes_debug(NES_DBG_CQ, "CQ Virtual Address = %08lX, size = %u.\n",
(unsigned long)req.user_cq_buffer, entries);
+ err = 1;
list_for_each_entry(nespbl, &nes_ucontext->cq_reg_mem_list, list) {
if (nespbl->user_base == (unsigned long )req.user_cq_buffer) {
list_del(&nespbl->list);
@@ -1686,7 +1687,7 @@
if (err) {
nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
kfree(nescq);
- return ERR_PTR(err);
+ return ERR_PTR(-EFAULT);
}
pbl_entries = nespbl->pbl_size >> 3;
@@ -1831,9 +1832,6 @@
spin_unlock_irqrestore(&nesdev->cqp.lock, flags);
}
}
- nes_debug(NES_DBG_CQ, "iWARP CQ%u create timeout expired, major code = 0x%04X,"
- " minor code = 0x%04X\n",
- nescq->hw_cq.cq_number, cqp_request->major_code, cqp_request->minor_code);
if (!context)
pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
nescq->hw_cq.cq_pbase);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f337800..a0f0e60 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -90,6 +90,11 @@
This allows one to create virtual interfaces that map packets to
or from specific MAC addresses to a particular interface.
+ Macvlan devices can be added using the "ip" command from the
+ iproute2 package starting with the iproute2-2.6.23 release:
+
+ "ip link add link <real dev> [ address MAC ] [ NAME ] type macvlan"
+
To compile this driver as a module, choose M here: the module
will be called macvlan.
@@ -2363,6 +2368,7 @@
config GELIC_WIRELESS
bool "PS3 Wireless support"
depends on GELIC_NET
+ select WIRELESS_EXT
help
This option adds the support for the wireless feature of PS3.
If you have the wireless-less model of PS3 or have no plan to
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 471c7f3..15853be 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -56,8 +56,8 @@
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.7.3"
-#define DRV_MODULE_RELDATE "January 29, 2008"
+#define DRV_MODULE_VERSION "1.7.4"
+#define DRV_MODULE_RELDATE "February 18, 2008"
#define RUN_AT(x) (jiffies + (x))
@@ -1273,14 +1273,20 @@
if ((bp->phy_flags & BNX2_PHY_FLAG_SERDES) &&
(CHIP_NUM(bp) == CHIP_NUM_5706)) {
- u32 val;
+ u32 val, an_dbg;
if (bp->phy_flags & BNX2_PHY_FLAG_FORCED_DOWN) {
bnx2_5706s_force_link_dn(bp, 0);
bp->phy_flags &= ~BNX2_PHY_FLAG_FORCED_DOWN;
}
val = REG_RD(bp, BNX2_EMAC_STATUS);
- if (val & BNX2_EMAC_STATUS_LINK)
+
+ bnx2_write_phy(bp, MII_BNX2_MISC_SHADOW, MISC_SHDW_AN_DBG);
+ bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &an_dbg);
+ bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &an_dbg);
+
+ if ((val & BNX2_EMAC_STATUS_LINK) &&
+ !(an_dbg & MISC_SHDW_AN_DBG_NOSYNC))
bmsr |= BMSR_LSTATUS;
else
bmsr &= ~BMSR_LSTATUS;
@@ -5356,11 +5362,15 @@
return -ENODEV;
}
+/* Determining link for parallel detection. */
static int
bnx2_5706_serdes_has_link(struct bnx2 *bp)
{
u32 mode_ctl, an_dbg, exp;
+ if (bp->phy_flags & BNX2_PHY_FLAG_NO_PARALLEL)
+ return 0;
+
bnx2_write_phy(bp, MII_BNX2_MISC_SHADOW, MISC_SHDW_MODE_CTL);
bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &mode_ctl);
@@ -5390,13 +5400,6 @@
int check_link = 1;
spin_lock(&bp->phy_lock);
- if (bp->phy_flags & BNX2_PHY_FLAG_FORCED_DOWN) {
- bnx2_5706s_force_link_dn(bp, 0);
- bp->phy_flags &= ~BNX2_PHY_FLAG_FORCED_DOWN;
- spin_unlock(&bp->phy_lock);
- return;
- }
-
if (bp->serdes_an_pending) {
bp->serdes_an_pending--;
check_link = 0;
@@ -5420,7 +5423,6 @@
(bp->phy_flags & BNX2_PHY_FLAG_PARALLEL_DETECT)) {
u32 phy2;
- check_link = 0;
bnx2_write_phy(bp, 0x17, 0x0f01);
bnx2_read_phy(bp, 0x15, &phy2);
if (phy2 & 0x20) {
@@ -5435,17 +5437,21 @@
} else
bp->current_interval = bp->timer_interval;
- if (bp->link_up && (bp->autoneg & AUTONEG_SPEED) && check_link) {
+ if (check_link) {
u32 val;
bnx2_write_phy(bp, MII_BNX2_MISC_SHADOW, MISC_SHDW_AN_DBG);
bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &val);
bnx2_read_phy(bp, MII_BNX2_MISC_SHADOW, &val);
- if (val & MISC_SHDW_AN_DBG_NOSYNC) {
- bnx2_5706s_force_link_dn(bp, 1);
- bp->phy_flags |= BNX2_PHY_FLAG_FORCED_DOWN;
- }
+ if (bp->link_up && (val & MISC_SHDW_AN_DBG_NOSYNC)) {
+ if (!(bp->phy_flags & BNX2_PHY_FLAG_FORCED_DOWN)) {
+ bnx2_5706s_force_link_dn(bp, 1);
+ bp->phy_flags |= BNX2_PHY_FLAG_FORCED_DOWN;
+ } else
+ bnx2_set_link(bp);
+ } else if (!bp->link_up && !(val & MISC_SHDW_AN_DBG_NOSYNC))
+ bnx2_set_link(bp);
}
spin_unlock(&bp->phy_lock);
}
@@ -7326,7 +7332,15 @@
bp->flags |= BNX2_FLAG_NO_WOL;
bp->wol = 0;
}
- if (CHIP_NUM(bp) != CHIP_NUM_5706) {
+ if (CHIP_NUM(bp) == CHIP_NUM_5706) {
+ /* Don't do parallel detect on this board because of
+ * some board problems. The link will not go down
+ * if we do parallel detect.
+ */
+ if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP &&
+ pdev->subsystem_device == 0x310c)
+ bp->phy_flags |= BNX2_PHY_FLAG_NO_PARALLEL;
+ } else {
bp->phy_addr = 2;
if (reg & BNX2_SHARED_HW_CFG_PHY_2_5G)
bp->phy_flags |= BNX2_PHY_FLAG_2_5G_CAPABLE;
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 3aa0364..1eaf5bb 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6673,6 +6673,7 @@
#define BNX2_PHY_FLAG_DIS_EARLY_DAC 0x00000400
#define BNX2_PHY_FLAG_REMOTE_PHY_CAP 0x00000800
#define BNX2_PHY_FLAG_FORCED_DOWN 0x00001000
+#define BNX2_PHY_FLAG_NO_PARALLEL 0x00002000
u32 mii_bmcr;
u32 mii_bmsr;
diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c
index afc7f34..8af142c 100644
--- a/drivers/net/bnx2x.c
+++ b/drivers/net/bnx2x.c
@@ -1,6 +1,6 @@
/* bnx2x.c: Broadcom Everest network driver.
*
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -10,13 +10,13 @@
* Based on code from Michael Chan's bnx2 driver
* UDP CSUM errata workaround by Arik Gendelman
* Slowpath rework by Vladislav Zolotarov
- * Statistics and Link managment by Yitchak Gertner
+ * Statistics and Link management by Yitchak Gertner
*
*/
/* define this to make the driver freeze on error
* to allow getting debug info
- * (you will need to reboot afterwords)
+ * (you will need to reboot afterwards)
*/
/*#define BNX2X_STOP_ON_ERROR*/
@@ -63,22 +63,21 @@
#include "bnx2x.h"
#include "bnx2x_init.h"
-#define DRV_MODULE_VERSION "0.40.15"
-#define DRV_MODULE_RELDATE "$DateTime: 2007/11/15 07:28:37 $"
-#define BNX2X_BC_VER 0x040009
+#define DRV_MODULE_VERSION "1.40.22"
+#define DRV_MODULE_RELDATE "2007/11/27"
+#define BNX2X_BC_VER 0x040200
/* Time in jiffies before concluding the transmitter is hung. */
#define TX_TIMEOUT (5*HZ)
static char version[] __devinitdata =
- "Broadcom NetXtreme II 577xx 10Gigabit Ethernet Driver "
+ "Broadcom NetXtreme II 5771X 10Gigabit Ethernet Driver "
DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
MODULE_AUTHOR("Eliezer Tamir <eliezert@broadcom.com>");
MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_MODULE_VERSION);
-MODULE_INFO(cvs_version, "$Revision: #356 $");
static int use_inta;
static int poll;
@@ -94,8 +93,8 @@
MODULE_PARM_DESC(use_inta, "use INT#A instead of MSI-X");
MODULE_PARM_DESC(poll, "use polling (for debug)");
MODULE_PARM_DESC(onefunc, "enable only first function");
-MODULE_PARM_DESC(nomcp, "ignore managment CPU (Implies onefunc)");
-MODULE_PARM_DESC(debug, "defualt debug msglevel");
+MODULE_PARM_DESC(nomcp, "ignore management CPU (Implies onefunc)");
+MODULE_PARM_DESC(debug, "default debug msglevel");
#ifdef BNX2X_MULTI
module_param(use_multi, int, 0);
@@ -298,8 +297,7 @@
static int bnx2x_mc_assert(struct bnx2x *bp)
{
- int i, j;
- int rc = 0;
+ int i, j, rc = 0;
char last_idx;
const char storm[] = {"XTCU"};
const u32 intmem_base[] = {
@@ -313,8 +311,9 @@
for (i = 0; i < 4; i++) {
last_idx = REG_RD8(bp, XSTORM_ASSERT_LIST_INDEX_OFFSET +
intmem_base[i]);
- BNX2X_ERR("DATA %cSTORM_ASSERT_LIST_INDEX 0x%x\n",
- storm[i], last_idx);
+ if (last_idx)
+ BNX2X_LOG("DATA %cSTORM_ASSERT_LIST_INDEX 0x%x\n",
+ storm[i], last_idx);
/* print the asserts */
for (j = 0; j < STROM_ASSERT_ARRAY_SIZE; j++) {
@@ -330,7 +329,7 @@
intmem_base[i]);
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
- BNX2X_ERR("DATA %cSTORM_ASSERT_INDEX 0x%x ="
+ BNX2X_LOG("DATA %cSTORM_ASSERT_INDEX 0x%x ="
" 0x%08x 0x%08x 0x%08x 0x%08x\n",
storm[i], j, row3, row2, row1, row0);
rc++;
@@ -341,6 +340,7 @@
}
return rc;
}
+
static void bnx2x_fw_dump(struct bnx2x *bp)
{
u32 mark, offset;
@@ -348,21 +348,22 @@
int word;
mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104);
- printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n", mark);
+ mark = ((mark + 0x3) & ~0x3);
+ printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n" KERN_ERR, mark);
for (offset = mark - 0x08000000; offset <= 0xF900; offset += 0x8*4) {
for (word = 0; word < 8; word++)
data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH +
offset + 4*word));
data[8] = 0x0;
- printk(KERN_ERR PFX "%s", (char *)data);
+ printk(KERN_CONT "%s", (char *)data);
}
for (offset = 0xF108; offset <= mark - 0x08000000; offset += 0x8*4) {
for (word = 0; word < 8; word++)
data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH +
offset + 4*word));
data[8] = 0x0;
- printk(KERN_ERR PFX "%s", (char *)data);
+ printk(KERN_CONT "%s", (char *)data);
}
printk("\n" KERN_ERR PFX "end of fw dump\n");
}
@@ -427,10 +428,10 @@
}
}
- BNX2X_ERR("def_c_idx(%u) def_u_idx(%u) def_t_idx(%u)"
- " def_x_idx(%u) def_att_idx(%u) attn_state(%u)"
+ BNX2X_ERR("def_c_idx(%u) def_u_idx(%u) def_x_idx(%u)"
+ " def_t_idx(%u) def_att_idx(%u) attn_state(%u)"
" spq_prod_idx(%u)\n",
- bp->def_c_idx, bp->def_u_idx, bp->def_t_idx, bp->def_x_idx,
+ bp->def_c_idx, bp->def_u_idx, bp->def_x_idx, bp->def_t_idx,
bp->def_att_idx, bp->attn_state, bp->spq_prod_idx);
@@ -441,7 +442,7 @@
DP(BNX2X_MSG_STATS, "stats_state - DISABLE\n");
}
-static void bnx2x_enable_int(struct bnx2x *bp)
+static void bnx2x_int_enable(struct bnx2x *bp)
{
int port = bp->port;
u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
@@ -454,18 +455,26 @@
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
} else {
val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
+ HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
HC_CONFIG_0_REG_INT_LINE_EN_0 |
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
+
+ /* Errata A0.158 workaround */
+ DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x) MSI-X %d\n",
+ val, port, addr, msix);
+
+ REG_WR(bp, addr, val);
+
val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0;
}
- DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x) msi %d\n",
+ DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x) MSI-X %d\n",
val, port, addr, msix);
REG_WR(bp, addr, val);
}
-static void bnx2x_disable_int(struct bnx2x *bp)
+static void bnx2x_int_disable(struct bnx2x *bp)
{
int port = bp->port;
u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
@@ -484,15 +493,15 @@
BNX2X_ERR("BUG! proper val not read from IGU!\n");
}
-static void bnx2x_disable_int_sync(struct bnx2x *bp)
+static void bnx2x_int_disable_sync(struct bnx2x *bp)
{
int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0;
int i;
atomic_inc(&bp->intr_sem);
- /* prevent the HW from sending interrupts*/
- bnx2x_disable_int(bp);
+ /* prevent the HW from sending interrupts */
+ bnx2x_int_disable(bp);
/* make sure all ISRs are done */
if (msix) {
@@ -775,6 +784,7 @@
mb(); /* force bnx2x_wait_ramrod to see the change */
return;
}
+
switch (command | bp->state) {
case (RAMROD_CMD_ID_ETH_PORT_SETUP | BNX2X_STATE_OPENING_WAIT4_PORT):
DP(NETIF_MSG_IFUP, "got setup ramrod\n");
@@ -787,20 +797,20 @@
fp->state = BNX2X_FP_STATE_HALTED;
break;
- case (RAMROD_CMD_ID_ETH_PORT_DEL | BNX2X_STATE_CLOSING_WAIT4_DELETE):
- DP(NETIF_MSG_IFDOWN, "got delete ramrod\n");
- bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD;
- break;
-
case (RAMROD_CMD_ID_ETH_CFC_DEL | BNX2X_STATE_CLOSING_WAIT4_HALT):
- DP(NETIF_MSG_IFDOWN, "got delete ramrod for MULTI[%d]\n", cid);
- bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_DELETED;
+ DP(NETIF_MSG_IFDOWN, "got delete ramrod for MULTI[%d]\n",
+ cid);
+ bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_CLOSED;
break;
case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_OPEN):
DP(NETIF_MSG_IFUP, "got set mac ramrod\n");
break;
+ case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_CLOSING_WAIT4_HALT):
+ DP(NETIF_MSG_IFUP, "got (un)set mac ramrod\n");
+ break;
+
default:
BNX2X_ERR("unexpected ramrod (%d) state is %x\n",
command, bp->state);
@@ -1179,12 +1189,175 @@
return val;
}
+static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
+{
+ u32 cnt;
+ u32 lock_status;
+ u32 resource_bit = (1 << resource);
+ u8 func = bp->port;
+
+ /* Validating that the resource is within range */
+ if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+ DP(NETIF_MSG_HW,
+ "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
+ resource, HW_LOCK_MAX_RESOURCE_VALUE);
+ return -EINVAL;
+ }
+
+ /* Validating that the resource is not already taken */
+ lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+ if (lock_status & resource_bit) {
+ DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n",
+ lock_status, resource_bit);
+ return -EEXIST;
+ }
+
+ /* Try for 1 second every 5ms */
+ for (cnt = 0; cnt < 200; cnt++) {
+ /* Try to acquire the lock */
+ REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8 + 4,
+ resource_bit);
+ lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+ if (lock_status & resource_bit)
+ return 0;
+
+ msleep(5);
+ }
+ DP(NETIF_MSG_HW, "Timeout\n");
+ return -EAGAIN;
+}
+
+static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource)
+{
+ u32 lock_status;
+ u32 resource_bit = (1 << resource);
+ u8 func = bp->port;
+
+ /* Validating that the resource is within range */
+ if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+ DP(NETIF_MSG_HW,
+ "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
+ resource, HW_LOCK_MAX_RESOURCE_VALUE);
+ return -EINVAL;
+ }
+
+ /* Validating that the resource is currently taken */
+ lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+ if (!(lock_status & resource_bit)) {
+ DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n",
+ lock_status, resource_bit);
+ return -EFAULT;
+ }
+
+ REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8, resource_bit);
+ return 0;
+}
+
+static int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
+{
+ /* The GPIO should be swapped if swap register is set and active */
+ int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
+ REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ bp->port;
+ int gpio_shift = gpio_num +
+ (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
+ u32 gpio_mask = (1 << gpio_shift);
+ u32 gpio_reg;
+
+ if (gpio_num > MISC_REGISTERS_GPIO_3) {
+ BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
+ return -EINVAL;
+ }
+
+ bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
+ /* read GPIO and mask except the float bits */
+ gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
+
+ switch (mode) {
+ case MISC_REGISTERS_GPIO_OUTPUT_LOW:
+ DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output low\n",
+ gpio_num, gpio_shift);
+ /* clear FLOAT and set CLR */
+ gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+ gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS);
+ break;
+
+ case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
+ DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output high\n",
+ gpio_num, gpio_shift);
+ /* clear FLOAT and set SET */
+ gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+ gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
+ break;
+
+ case MISC_REGISTERS_GPIO_INPUT_HI_Z :
+ DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> input\n",
+ gpio_num, gpio_shift);
+ /* set FLOAT */
+ gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+ break;
+
+ default:
+ break;
+ }
+
+ REG_WR(bp, MISC_REG_GPIO, gpio_reg);
+ bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_GPIO);
+
+ return 0;
+}
+
+static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
+{
+ u32 spio_mask = (1 << spio_num);
+ u32 spio_reg;
+
+ if ((spio_num < MISC_REGISTERS_SPIO_4) ||
+ (spio_num > MISC_REGISTERS_SPIO_7)) {
+ BNX2X_ERR("Invalid SPIO %d\n", spio_num);
+ return -EINVAL;
+ }
+
+ bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
+ /* read SPIO and mask except the float bits */
+ spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT);
+
+ switch (mode) {
+ case MISC_REGISTERS_SPIO_OUTPUT_LOW :
+ DP(NETIF_MSG_LINK, "Set SPIO %d -> output low\n", spio_num);
+ /* clear FLOAT and set CLR */
+ spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
+ spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_CLR_POS);
+ break;
+
+ case MISC_REGISTERS_SPIO_OUTPUT_HIGH :
+ DP(NETIF_MSG_LINK, "Set SPIO %d -> output high\n", spio_num);
+ /* clear FLOAT and set SET */
+ spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
+ spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_SET_POS);
+ break;
+
+ case MISC_REGISTERS_SPIO_INPUT_HI_Z:
+ DP(NETIF_MSG_LINK, "Set SPIO %d -> input\n", spio_num);
+ /* set FLOAT */
+ spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
+ break;
+
+ default:
+ break;
+ }
+
+ REG_WR(bp, MISC_REG_SPIO, spio_reg);
+ bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_SPIO);
+
+ return 0;
+}
+
static int bnx2x_mdio22_write(struct bnx2x *bp, u32 reg, u32 val)
{
- int rc;
- u32 tmp, i;
int port = bp->port;
u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+ u32 tmp;
+ int i, rc;
/* DP(NETIF_MSG_HW, "phy_addr 0x%x reg 0x%x val 0x%08x\n",
bp->phy_addr, reg, val); */
@@ -1236,8 +1409,8 @@
{
int port = bp->port;
u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
- u32 val, i;
- int rc;
+ u32 val;
+ int i, rc;
if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
@@ -1286,58 +1459,54 @@
return rc;
}
-static int bnx2x_mdio45_write(struct bnx2x *bp, u32 reg, u32 addr, u32 val)
+static int bnx2x_mdio45_ctrl_write(struct bnx2x *bp, u32 mdio_ctrl,
+ u32 phy_addr, u32 reg, u32 addr, u32 val)
{
- int rc = 0;
- u32 tmp, i;
- int port = bp->port;
- u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+ u32 tmp;
+ int i, rc = 0;
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- tmp &= ~EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
- REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- udelay(40);
- }
-
- /* set clause 45 mode */
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- tmp |= EMAC_MDIO_MODE_CLAUSE_45;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
+ /* set clause 45 mode, slow down the MDIO clock to 2.5MHz
+ * (a value of 49==0x31) and make sure that the AUTO poll is off
+ */
+ tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ tmp &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT);
+ tmp |= (EMAC_MDIO_MODE_CLAUSE_45 |
+ (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp);
+ REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ udelay(40);
/* address */
- tmp = ((bp->phy_addr << 21) | (reg << 16) | addr |
+ tmp = ((phy_addr << 21) | (reg << 16) | addr |
EMAC_MDIO_COMM_COMMAND_ADDRESS |
EMAC_MDIO_COMM_START_BUSY);
- EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp);
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
for (i = 0; i < 50; i++) {
udelay(10);
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+ tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
udelay(5);
break;
}
}
-
if (tmp & EMAC_MDIO_COMM_START_BUSY) {
BNX2X_ERR("write phy register failed\n");
rc = -EBUSY;
+
} else {
/* data */
- tmp = ((bp->phy_addr << 21) | (reg << 16) | val |
+ tmp = ((phy_addr << 21) | (reg << 16) | val |
EMAC_MDIO_COMM_COMMAND_WRITE_45 |
EMAC_MDIO_COMM_START_BUSY);
- EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp);
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
for (i = 0; i < 50; i++) {
udelay(10);
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+ tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
udelay(5);
break;
@@ -1351,75 +1520,78 @@
}
}
- /* unset clause 45 mode */
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- tmp &= ~EMAC_MDIO_MODE_CLAUSE_45;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
-
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
+ /* unset clause 45 mode, set the MDIO clock to a faster value
+ * (0x13 => 6.25Mhz) and restore the AUTO poll if needed
+ */
+ tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ tmp &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT);
+ tmp |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT);
+ if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG)
tmp |= EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
- }
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp);
return rc;
}
-static int bnx2x_mdio45_read(struct bnx2x *bp, u32 reg, u32 addr,
- u32 *ret_val)
+static int bnx2x_mdio45_write(struct bnx2x *bp, u32 phy_addr, u32 reg,
+ u32 addr, u32 val)
{
- int port = bp->port;
- u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
- u32 val, i;
- int rc = 0;
+ u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
+ return bnx2x_mdio45_ctrl_write(bp, emac_base, phy_addr,
+ reg, addr, val);
+}
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- val &= ~EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
- REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- udelay(40);
- }
+static int bnx2x_mdio45_ctrl_read(struct bnx2x *bp, u32 mdio_ctrl,
+ u32 phy_addr, u32 reg, u32 addr,
+ u32 *ret_val)
+{
+ u32 val;
+ int i, rc = 0;
- /* set clause 45 mode */
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- val |= EMAC_MDIO_MODE_CLAUSE_45;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
+ /* set clause 45 mode, slow down the MDIO clock to 2.5MHz
+ * (a value of 49==0x31) and make sure that the AUTO poll is off
+ */
+ val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ val &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT);
+ val |= (EMAC_MDIO_MODE_CLAUSE_45 |
+ (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
+ REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ udelay(40);
/* address */
- val = ((bp->phy_addr << 21) | (reg << 16) | addr |
+ val = ((phy_addr << 21) | (reg << 16) | addr |
EMAC_MDIO_COMM_COMMAND_ADDRESS |
EMAC_MDIO_COMM_START_BUSY);
- EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val);
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
for (i = 0; i < 50; i++) {
udelay(10);
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+ val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
udelay(5);
break;
}
}
-
if (val & EMAC_MDIO_COMM_START_BUSY) {
BNX2X_ERR("read phy register failed\n");
*ret_val = 0;
rc = -EBUSY;
+
} else {
/* data */
- val = ((bp->phy_addr << 21) | (reg << 16) |
+ val = ((phy_addr << 21) | (reg << 16) |
EMAC_MDIO_COMM_COMMAND_READ_45 |
EMAC_MDIO_COMM_START_BUSY);
- EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val);
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
for (i = 0; i < 50; i++) {
udelay(10);
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+ val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
val &= EMAC_MDIO_COMM_DATA;
break;
@@ -1436,31 +1608,39 @@
*ret_val = val;
}
- /* unset clause 45 mode */
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- val &= ~EMAC_MDIO_MODE_CLAUSE_45;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
-
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
+ /* unset clause 45 mode, set the MDIO clock to a faster value
+ * (0x13 => 6.25Mhz) and restore the AUTO poll if needed
+ */
+ val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ val &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT);
+ val |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT);
+ if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG)
val |= EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
- }
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
return rc;
}
-static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 reg, u32 addr, u32 val)
+static int bnx2x_mdio45_read(struct bnx2x *bp, u32 phy_addr, u32 reg,
+ u32 addr, u32 *ret_val)
+{
+ u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+
+ return bnx2x_mdio45_ctrl_read(bp, emac_base, phy_addr,
+ reg, addr, ret_val);
+}
+
+static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 phy_addr, u32 reg,
+ u32 addr, u32 val)
{
int i;
u32 rd_val;
might_sleep();
for (i = 0; i < 10; i++) {
- bnx2x_mdio45_write(bp, reg, addr, val);
+ bnx2x_mdio45_write(bp, phy_addr, reg, addr, val);
msleep(5);
- bnx2x_mdio45_read(bp, reg, addr, &rd_val);
+ bnx2x_mdio45_read(bp, phy_addr, reg, addr, &rd_val);
/* if the read value is not the same as the value we wrote,
we should write it again */
if (rd_val == val)
@@ -1471,18 +1651,81 @@
}
/*
- * link managment
+ * link management
*/
+static void bnx2x_pause_resolve(struct bnx2x *bp, u32 pause_result)
+{
+ switch (pause_result) { /* ASYM P ASYM P */
+ case 0xb: /* 1 0 1 1 */
+ bp->flow_ctrl = FLOW_CTRL_TX;
+ break;
+
+ case 0xe: /* 1 1 1 0 */
+ bp->flow_ctrl = FLOW_CTRL_RX;
+ break;
+
+ case 0x5: /* 0 1 0 1 */
+ case 0x7: /* 0 1 1 1 */
+ case 0xd: /* 1 1 0 1 */
+ case 0xf: /* 1 1 1 1 */
+ bp->flow_ctrl = FLOW_CTRL_BOTH;
+ break;
+
+ default:
+ break;
+ }
+}
+
+static u8 bnx2x_ext_phy_resove_fc(struct bnx2x *bp)
+{
+ u32 ext_phy_addr;
+ u32 ld_pause; /* local */
+ u32 lp_pause; /* link partner */
+ u32 an_complete; /* AN complete */
+ u32 pause_result;
+ u8 ret = 0;
+
+ ext_phy_addr = ((bp->ext_phy_config &
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+
+ /* read twice */
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_STATUS, &an_complete);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_STATUS, &an_complete);
+
+ if (an_complete & EXT_PHY_KR_AUTO_NEG_COMPLETE) {
+ ret = 1;
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_AUTO_NEG_ADVERT, &ld_pause);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_LP_AUTO_NEG, &lp_pause);
+ pause_result = (ld_pause &
+ EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 8;
+ pause_result |= (lp_pause &
+ EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 10;
+ DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n",
+ pause_result);
+ bnx2x_pause_resolve(bp, pause_result);
+ }
+ return ret;
+}
+
static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status)
{
- u32 ld_pause; /* local driver */
- u32 lp_pause; /* link partner */
+ u32 ld_pause; /* local driver */
+ u32 lp_pause; /* link partner */
u32 pause_result;
bp->flow_ctrl = 0;
- /* reolve from gp_status in case of AN complete and not sgmii */
+ /* resolve from gp_status in case of AN complete and not sgmii */
if ((bp->req_autoneg & AUTONEG_FLOW_CTRL) &&
(gp_status & MDIO_AN_CL73_OR_37_COMPLETE) &&
(!(bp->phy_flags & PHY_SGMII_FLAG)) &&
@@ -1499,45 +1742,57 @@
pause_result |= (lp_pause &
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7;
DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result);
+ bnx2x_pause_resolve(bp, pause_result);
+ } else if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) ||
+ !(bnx2x_ext_phy_resove_fc(bp))) {
+ /* forced speed */
+ if (bp->req_autoneg & AUTONEG_FLOW_CTRL) {
+ switch (bp->req_flow_ctrl) {
+ case FLOW_CTRL_AUTO:
+ if (bp->dev->mtu <= 4500)
+ bp->flow_ctrl = FLOW_CTRL_BOTH;
+ else
+ bp->flow_ctrl = FLOW_CTRL_TX;
+ break;
- switch (pause_result) { /* ASYM P ASYM P */
- case 0xb: /* 1 0 1 1 */
- bp->flow_ctrl = FLOW_CTRL_TX;
- break;
-
- case 0xe: /* 1 1 1 0 */
- bp->flow_ctrl = FLOW_CTRL_RX;
- break;
-
- case 0x5: /* 0 1 0 1 */
- case 0x7: /* 0 1 1 1 */
- case 0xd: /* 1 1 0 1 */
- case 0xf: /* 1 1 1 1 */
- bp->flow_ctrl = FLOW_CTRL_BOTH;
- break;
-
- default:
- break;
- }
-
- } else { /* forced mode */
- switch (bp->req_flow_ctrl) {
- case FLOW_CTRL_AUTO:
- if (bp->dev->mtu <= 4500)
- bp->flow_ctrl = FLOW_CTRL_BOTH;
- else
+ case FLOW_CTRL_TX:
bp->flow_ctrl = FLOW_CTRL_TX;
- break;
+ break;
- case FLOW_CTRL_TX:
- case FLOW_CTRL_RX:
- case FLOW_CTRL_BOTH:
- bp->flow_ctrl = bp->req_flow_ctrl;
- break;
+ case FLOW_CTRL_RX:
+ if (bp->dev->mtu <= 4500)
+ bp->flow_ctrl = FLOW_CTRL_RX;
+ break;
- case FLOW_CTRL_NONE:
- default:
- break;
+ case FLOW_CTRL_BOTH:
+ if (bp->dev->mtu <= 4500)
+ bp->flow_ctrl = FLOW_CTRL_BOTH;
+ else
+ bp->flow_ctrl = FLOW_CTRL_TX;
+ break;
+
+ case FLOW_CTRL_NONE:
+ default:
+ break;
+ }
+ } else { /* forced mode */
+ switch (bp->req_flow_ctrl) {
+ case FLOW_CTRL_AUTO:
+ DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while"
+ " req_autoneg 0x%x\n",
+ bp->req_flow_ctrl, bp->req_autoneg);
+ break;
+
+ case FLOW_CTRL_TX:
+ case FLOW_CTRL_RX:
+ case FLOW_CTRL_BOTH:
+ bp->flow_ctrl = bp->req_flow_ctrl;
+ break;
+
+ case FLOW_CTRL_NONE:
+ default:
+ break;
+ }
}
}
DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", bp->flow_ctrl);
@@ -1548,9 +1803,9 @@
bp->link_status = 0;
if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) {
- DP(NETIF_MSG_LINK, "link up\n");
+ DP(NETIF_MSG_LINK, "phy link up\n");
- bp->link_up = 1;
+ bp->phy_link_up = 1;
bp->link_status |= LINK_STATUS_LINK_UP;
if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS)
@@ -1659,20 +1914,20 @@
bp->link_status |= LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
} else { /* link_down */
- DP(NETIF_MSG_LINK, "link down\n");
+ DP(NETIF_MSG_LINK, "phy link down\n");
- bp->link_up = 0;
+ bp->phy_link_up = 0;
bp->line_speed = 0;
bp->duplex = DUPLEX_FULL;
bp->flow_ctrl = 0;
}
- DP(NETIF_MSG_LINK, "gp_status 0x%x link_up %d\n"
+ DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %d\n"
DP_LEVEL " line_speed %d duplex %d flow_ctrl 0x%x"
" link_status 0x%x\n",
- gp_status, bp->link_up, bp->line_speed, bp->duplex, bp->flow_ctrl,
- bp->link_status);
+ gp_status, bp->phy_link_up, bp->line_speed, bp->duplex,
+ bp->flow_ctrl, bp->link_status);
}
static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g)
@@ -1680,40 +1935,40 @@
int port = bp->port;
/* first reset all status
- * we asume only one line will be change at a time */
+ * we assume only one line will be change at a time */
bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- (NIG_XGXS0_LINK_STATUS |
- NIG_SERDES0_LINK_STATUS |
- NIG_STATUS_INTERRUPT_XGXS0_LINK10G));
- if (bp->link_up) {
+ (NIG_STATUS_XGXS0_LINK10G |
+ NIG_STATUS_XGXS0_LINK_STATUS |
+ NIG_STATUS_SERDES0_LINK_STATUS));
+ if (bp->phy_link_up) {
if (is_10g) {
/* Disable the 10G link interrupt
* by writing 1 to the status register
*/
- DP(NETIF_MSG_LINK, "10G XGXS link up\n");
+ DP(NETIF_MSG_LINK, "10G XGXS phy link up\n");
bnx2x_bits_en(bp,
NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- NIG_STATUS_INTERRUPT_XGXS0_LINK10G);
+ NIG_STATUS_XGXS0_LINK10G);
} else if (bp->phy_flags & PHY_XGXS_FLAG) {
/* Disable the link interrupt
* by writing 1 to the relevant lane
* in the status register
*/
- DP(NETIF_MSG_LINK, "1G XGXS link up\n");
+ DP(NETIF_MSG_LINK, "1G XGXS phy link up\n");
bnx2x_bits_en(bp,
NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
((1 << bp->ser_lane) <<
- NIG_XGXS0_LINK_STATUS_SIZE));
+ NIG_STATUS_XGXS0_LINK_STATUS_SIZE));
} else { /* SerDes */
- DP(NETIF_MSG_LINK, "SerDes link up\n");
+ DP(NETIF_MSG_LINK, "SerDes phy link up\n");
/* Disable the link interrupt
* by writing 1 to the status register
*/
bnx2x_bits_en(bp,
NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- NIG_SERDES0_LINK_STATUS);
+ NIG_STATUS_SERDES0_LINK_STATUS);
}
} else { /* link_down */
@@ -1724,91 +1979,182 @@
{
u32 ext_phy_type;
u32 ext_phy_addr;
- u32 local_phy;
- u32 val = 0;
+ u32 val1 = 0, val2;
u32 rx_sd, pcs_status;
if (bp->phy_flags & PHY_XGXS_FLAG) {
- local_phy = bp->phy_addr;
ext_phy_addr = ((bp->ext_phy_config &
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
- bp->phy_addr = (u8)ext_phy_addr;
ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
switch (ext_phy_type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
DP(NETIF_MSG_LINK, "XGXS Direct\n");
- val = 1;
+ val1 = 1;
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
DP(NETIF_MSG_LINK, "XGXS 8705\n");
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_WIS_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val);
- DP(NETIF_MSG_LINK, "8705 LASI status is %d\n", val);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_WIS_DEVAD,
+ EXT_PHY_OPT_LASI_STATUS, &val1);
+ DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_WIS_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val);
- DP(NETIF_MSG_LINK, "8705 LASI status is %d\n", val);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_WIS_DEVAD,
+ EXT_PHY_OPT_LASI_STATUS, &val1);
+ DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_PMD_RX_SD, &rx_sd);
- val = (rx_sd & 0x1);
+ DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd);
+ val1 = (rx_sd & 0x1);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
DP(NETIF_MSG_LINK, "XGXS 8706\n");
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val);
- DP(NETIF_MSG_LINK, "8706 LASI status is %d\n", val);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_LASI_STATUS, &val1);
+ DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1);
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val);
- DP(NETIF_MSG_LINK, "8706 LASI status is %d\n", val);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_LASI_STATUS, &val1);
+ DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1);
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_PMD_RX_SD, &rx_sd);
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_PCS_DEVAD,
- EXT_PHY_OPT_PCS_STATUS, &pcs_status);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PCS_DEVAD,
+ EXT_PHY_OPT_PCS_STATUS, &pcs_status);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_AUTO_NEG_DEVAD,
+ EXT_PHY_OPT_AN_LINK_STATUS, &val2);
+
DP(NETIF_MSG_LINK, "8706 rx_sd 0x%x"
- " pcs_status 0x%x\n", rx_sd, pcs_status);
- /* link is up if both bit 0 of pmd_rx and
- * bit 0 of pcs_status are set
+ " pcs_status 0x%x 1Gbps link_status 0x%x 0x%x\n",
+ rx_sd, pcs_status, val2, (val2 & (1<<1)));
+ /* link is up if both bit 0 of pmd_rx_sd and
+ * bit 0 of pcs_status are set, or if the autoneg bit
+ 1 is set
*/
- val = (rx_sd & pcs_status);
+ val1 = ((rx_sd & pcs_status & 0x1) || (val2 & (1<<1)));
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+
+ /* clear the interrupt LASI status register */
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PCS_DEVAD,
+ EXT_PHY_KR_LASI_STATUS, &val2);
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PCS_DEVAD,
+ EXT_PHY_KR_LASI_STATUS, &val1);
+ DP(NETIF_MSG_LINK, "KR LASI status 0x%x->0x%x\n",
+ val2, val1);
+ /* Check the LASI */
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ 0x9003, &val2);
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ 0x9003, &val1);
+ DP(NETIF_MSG_LINK, "KR 0x9003 0x%x->0x%x\n",
+ val2, val1);
+ /* Check the link status */
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PCS_DEVAD,
+ EXT_PHY_KR_PCS_STATUS, &val2);
+ DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2);
+ /* Check the link status on 1.1.2 */
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_KR_STATUS, &val2);
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_KR_STATUS, &val1);
+ DP(NETIF_MSG_LINK,
+ "KR PMA status 0x%x->0x%x\n", val2, val1);
+ val1 = ((val1 & 4) == 4);
+ /* If 1G was requested assume the link is up */
+ if (!(bp->req_autoneg & AUTONEG_SPEED) &&
+ (bp->req_line_speed == SPEED_1000))
+ val1 = 1;
+ bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_LASI_STATUS, &val2);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_LASI_STATUS, &val1);
+ DP(NETIF_MSG_LINK,
+ "10G-base-T LASI status 0x%x->0x%x\n", val2, val1);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_KR_STATUS, &val2);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_KR_STATUS, &val1);
+ DP(NETIF_MSG_LINK,
+ "10G-base-T PMA status 0x%x->0x%x\n", val2, val1);
+ val1 = ((val1 & 4) == 4);
+ /* if link is up
+ * print the AN outcome of the SFX7101 PHY
+ */
+ if (val1) {
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ 0x21, &val2);
+ DP(NETIF_MSG_LINK,
+ "SFX7101 AN status 0x%x->%s\n", val2,
+ (val2 & (1<<14)) ? "Master" : "Slave");
+ }
break;
default:
DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
bp->ext_phy_config);
- val = 0;
+ val1 = 0;
break;
}
- bp->phy_addr = local_phy;
} else { /* SerDes */
ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
switch (ext_phy_type) {
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
DP(NETIF_MSG_LINK, "SerDes Direct\n");
- val = 1;
+ val1 = 1;
break;
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
DP(NETIF_MSG_LINK, "SerDes 5482\n");
- val = 1;
+ val1 = 1;
break;
default:
DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n",
bp->ext_phy_config);
- val = 0;
+ val1 = 0;
break;
}
}
- return val;
+ return val1;
}
static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb)
@@ -1819,7 +2165,7 @@
u32 wb_write[2];
u32 val;
- DP(NETIF_MSG_LINK, "enableing BigMAC\n");
+ DP(NETIF_MSG_LINK, "enabling BigMAC\n");
/* reset and unreset the BigMac */
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
@@ -1933,6 +2279,35 @@
bp->stats_state = STATS_STATE_ENABLE;
}
+static void bnx2x_bmac_rx_disable(struct bnx2x *bp)
+{
+ int port = bp->port;
+ u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
+ NIG_REG_INGRESS_BMAC0_MEM;
+ u32 wb_write[2];
+
+ /* Only if the bmac is out of reset */
+ if (REG_RD(bp, MISC_REG_RESET_REG_2) &
+ (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)) {
+ /* Clear Rx Enable bit in BMAC_CONTROL register */
+#ifdef BNX2X_DMAE_RD
+ bnx2x_read_dmae(bp, bmac_addr +
+ BIGMAC_REGISTER_BMAC_CONTROL, 2);
+ wb_write[0] = *bnx2x_sp(bp, wb_data[0]);
+ wb_write[1] = *bnx2x_sp(bp, wb_data[1]);
+#else
+ wb_write[0] = REG_RD(bp,
+ bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL);
+ wb_write[1] = REG_RD(bp,
+ bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL + 4);
+#endif
+ wb_write[0] &= ~BMAC_CONTROL_RX_ENABLE;
+ REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
+ wb_write, 2);
+ msleep(1);
+ }
+}
+
static void bnx2x_emac_enable(struct bnx2x *bp)
{
int port = bp->port;
@@ -1940,7 +2315,7 @@
u32 val;
int timeout;
- DP(NETIF_MSG_LINK, "enableing EMAC\n");
+ DP(NETIF_MSG_LINK, "enabling EMAC\n");
/* reset and unreset the emac core */
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
(MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
@@ -2033,7 +2408,7 @@
EMAC_TX_MODE_EXT_PAUSE_EN);
}
- /* KEEP_VLAN_TAG, promiscous */
+ /* KEEP_VLAN_TAG, promiscuous */
val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE);
val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS;
EMAC_WR(EMAC_REG_EMAC_RX_MODE, val);
@@ -2161,7 +2536,6 @@
u32 count = 1000;
u32 pause = 0;
-
/* disable port */
REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1);
@@ -2232,7 +2606,7 @@
static void bnx2x_update_mng(struct bnx2x *bp)
{
if (!nomcp)
- SHMEM_WR(bp, drv_fw_mb[bp->port].link_status,
+ SHMEM_WR(bp, port_mb[bp->port].link_status,
bp->link_status);
}
@@ -2294,20 +2668,20 @@
DP(BNX2X_MSG_STATS, "stats_state - STOP\n");
}
- /* indicate link down */
+ /* indicate no mac active */
bp->phy_flags &= ~(PHY_BMAC_FLAG | PHY_EMAC_FLAG);
- /* reset BigMac */
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
- (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
-
- /* ignore drain flag interrupt */
- /* activate nig drain */
- NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
-
/* update shared memory */
bnx2x_update_mng(bp);
+ /* activate nig drain */
+ NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+
+ /* reset BigMac */
+ bnx2x_bmac_rx_disable(bp);
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+ (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+
/* indicate link down */
bnx2x_link_report(bp);
}
@@ -2317,14 +2691,15 @@
/* This function is called upon link interrupt */
static void bnx2x_link_update(struct bnx2x *bp)
{
- u32 gp_status;
int port = bp->port;
int i;
+ u32 gp_status;
int link_10g;
- DP(NETIF_MSG_LINK, "port %x, is xgxs %x, stat_mask 0x%x,"
+ DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x,"
" int_mask 0x%x, saved_mask 0x%x, MI_INT %x, SERDES_LINK %x,"
- " 10G %x, XGXS_LINK %x\n", port, (bp->phy_flags & PHY_XGXS_FLAG),
+ " 10G %x, XGXS_LINK %x\n", port,
+ (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4),
REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), bp->nig_mask,
REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
@@ -2336,7 +2711,7 @@
might_sleep();
MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_GP_STATUS);
/* avoid fast toggling */
- for (i = 0 ; i < 10 ; i++) {
+ for (i = 0; i < 10; i++) {
msleep(10);
bnx2x_mdio22_read(bp, MDIO_GP_STATUS_TOP_AN_STATUS1,
&gp_status);
@@ -2351,7 +2726,8 @@
bnx2x_link_int_ack(bp, link_10g);
/* link is up only if both local phy and external phy are up */
- if (bp->link_up && bnx2x_ext_phy_is_link_up(bp)) {
+ bp->link_up = (bp->phy_link_up && bnx2x_ext_phy_is_link_up(bp));
+ if (bp->link_up) {
if (link_10g) {
bnx2x_bmac_enable(bp, 0);
bnx2x_leds_set(bp, SPEED_10000);
@@ -2427,7 +2803,9 @@
}
}
- BNX2X_ERR("BUG! unicore is still in reset!\n");
+ BNX2X_ERR("BUG! %s (0x%x) is still in reset!\n",
+ (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
+ bp->phy_addr);
}
static void bnx2x_set_swap_lanes(struct bnx2x *bp)
@@ -2475,12 +2853,12 @@
MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_10G_PARALLEL_DETECT);
bnx2x_mdio22_write(bp,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK,
+ MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK,
MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT);
bnx2x_mdio22_read(bp,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
- &control2);
+ MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
+ &control2);
if (bp->autoneg & AUTONEG_PARALLEL) {
control2 |=
@@ -2490,8 +2868,14 @@
~MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN;
}
bnx2x_mdio22_write(bp,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
- control2);
+ MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
+ control2);
+
+ /* Disable parallel detection of HiG */
+ MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_XGXS_BLOCK2);
+ bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_UNICORE_MODE_10G,
+ MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS |
+ MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS);
}
}
@@ -2625,7 +3009,7 @@
MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_OVER_1G);
/* set extended capabilities */
- if (bp->advertising & ADVERTISED_2500baseT_Full)
+ if (bp->advertising & ADVERTISED_2500baseX_Full)
val |= MDIO_OVER_1G_UP1_2_5G;
if (bp->advertising & ADVERTISED_10000baseT_Full)
val |= MDIO_OVER_1G_UP1_10G;
@@ -2641,20 +3025,91 @@
/* for AN, we are always publishing full duplex */
an_adv = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
- /* set pause */
- switch (bp->pause_mode) {
- case PAUSE_SYMMETRIC:
- an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC;
- break;
- case PAUSE_ASYMMETRIC:
- an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
- break;
- case PAUSE_BOTH:
- an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
- break;
- case PAUSE_NONE:
- an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
- break;
+ /* resolve pause mode and advertisement
+ * Please refer to Table 28B-3 of the 802.3ab-1999 spec */
+ if (bp->req_autoneg & AUTONEG_FLOW_CTRL) {
+ switch (bp->req_flow_ctrl) {
+ case FLOW_CTRL_AUTO:
+ if (bp->dev->mtu <= 4500) {
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+ bp->advertising |= (ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ } else {
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+ bp->advertising |= ADVERTISED_Asym_Pause;
+ }
+ break;
+
+ case FLOW_CTRL_TX:
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+ bp->advertising |= ADVERTISED_Asym_Pause;
+ break;
+
+ case FLOW_CTRL_RX:
+ if (bp->dev->mtu <= 4500) {
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+ bp->advertising |= (ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ } else {
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+ bp->advertising &= ~(ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ }
+ break;
+
+ case FLOW_CTRL_BOTH:
+ if (bp->dev->mtu <= 4500) {
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+ bp->advertising |= (ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ } else {
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+ bp->advertising |= ADVERTISED_Asym_Pause;
+ }
+ break;
+
+ case FLOW_CTRL_NONE:
+ default:
+ an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+ bp->advertising &= ~(ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ break;
+ }
+ } else { /* forced mode */
+ switch (bp->req_flow_ctrl) {
+ case FLOW_CTRL_AUTO:
+ DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while"
+ " req_autoneg 0x%x\n",
+ bp->req_flow_ctrl, bp->req_autoneg);
+ break;
+
+ case FLOW_CTRL_TX:
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+ bp->advertising |= ADVERTISED_Asym_Pause;
+ break;
+
+ case FLOW_CTRL_RX:
+ case FLOW_CTRL_BOTH:
+ an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+ bp->advertising |= (ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ break;
+
+ case FLOW_CTRL_NONE:
+ default:
+ an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+ bp->advertising &= ~(ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ break;
+ }
}
MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
@@ -2752,47 +3207,162 @@
static void bnx2x_link_int_enable(struct bnx2x *bp)
{
int port = bp->port;
+ u32 ext_phy_type;
+ u32 mask;
/* setting the status to report on link up
for either XGXS or SerDes */
bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- (NIG_XGXS0_LINK_STATUS |
- NIG_STATUS_INTERRUPT_XGXS0_LINK10G |
- NIG_SERDES0_LINK_STATUS));
+ (NIG_STATUS_XGXS0_LINK10G |
+ NIG_STATUS_XGXS0_LINK_STATUS |
+ NIG_STATUS_SERDES0_LINK_STATUS));
if (bp->phy_flags & PHY_XGXS_FLAG) {
- /* TBD -
- * in force mode (not AN) we can enable just the relevant
- * interrupt
- * Even in AN we might enable only one according to the AN
- * speed mask
- */
- bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- (NIG_MASK_XGXS0_LINK_STATUS |
- NIG_MASK_XGXS0_LINK10G));
- DP(NETIF_MSG_LINK, "enable XGXS interrupt\n");
+ mask = (NIG_MASK_XGXS0_LINK10G |
+ NIG_MASK_XGXS0_LINK_STATUS);
+ DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n");
+ ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+ if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
+ (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
+ (ext_phy_type !=
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) {
+ mask |= NIG_MASK_MI_INT;
+ DP(NETIF_MSG_LINK, "enabled external phy int\n");
+ }
} else { /* SerDes */
- bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- NIG_MASK_SERDES0_LINK_STATUS);
- DP(NETIF_MSG_LINK, "enable SerDes interrupt\n");
+ mask = NIG_MASK_SERDES0_LINK_STATUS;
+ DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n");
+ ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
+ if ((ext_phy_type !=
+ PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
+ (ext_phy_type !=
+ PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN)) {
+ mask |= NIG_MASK_MI_INT;
+ DP(NETIF_MSG_LINK, "enabled external phy int\n");
+ }
}
+ bnx2x_bits_en(bp,
+ NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+ mask);
+ DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x,"
+ " int_mask 0x%x, MI_INT %x, SERDES_LINK %x,"
+ " 10G %x, XGXS_LINK %x\n", port,
+ (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
+ REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4),
+ REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4),
+ REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
+ REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c),
+ REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
+ REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)
+ );
+}
+
+static void bnx2x_bcm8072_external_rom_boot(struct bnx2x *bp)
+{
+ u32 ext_phy_addr = ((bp->ext_phy_config &
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u32 fw_ver1, fw_ver2;
+
+ /* Need to wait 200ms after reset */
+ msleep(200);
+ /* Boot port from external ROM
+ * Set ser_boot_ctl bit in the MISC_CTRL1 register
+ */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ EXT_PHY_KR_MISC_CTRL1, 0x0001);
+
+ /* Reset internal microprocessor */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
+ EXT_PHY_KR_ROM_RESET_INTERNAL_MP);
+ /* set micro reset = 0 */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
+ EXT_PHY_KR_ROM_MICRO_RESET);
+ /* Reset internal microprocessor */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
+ EXT_PHY_KR_ROM_RESET_INTERNAL_MP);
+ /* wait for 100ms for code download via SPI port */
+ msleep(100);
+
+ /* Clear ser_boot_ctl bit */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ EXT_PHY_KR_MISC_CTRL1, 0x0000);
+ /* Wait 100ms */
+ msleep(100);
+
+ /* Print the PHY FW version */
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ 0xca19, &fw_ver1);
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ 0xca1a, &fw_ver2);
+ DP(NETIF_MSG_LINK,
+ "8072 FW version 0x%x:0x%x\n", fw_ver1, fw_ver2);
+}
+
+static void bnx2x_bcm8072_force_10G(struct bnx2x *bp)
+{
+ u32 ext_phy_addr = ((bp->ext_phy_config &
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+
+ /* Force KR or KX */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL,
+ 0x2040);
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL2,
+ 0x000b);
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_PMD_CTRL,
+ 0x0000);
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD, EXT_PHY_KR_CTRL,
+ 0x0000);
}
static void bnx2x_ext_phy_init(struct bnx2x *bp)
{
- int port = bp->port;
u32 ext_phy_type;
u32 ext_phy_addr;
- u32 local_phy;
+ u32 cnt;
+ u32 ctrl;
+ u32 val = 0;
if (bp->phy_flags & PHY_XGXS_FLAG) {
- local_phy = bp->phy_addr;
ext_phy_addr = ((bp->ext_phy_config &
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+ /* Make sure that the soft reset is off (expect for the 8072:
+ * due to the lock, it will be done inside the specific
+ * handling)
+ */
+ if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
+ (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
+ (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) &&
+ (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072)) {
+ /* Wait for soft reset to get cleared upto 1 sec */
+ for (cnt = 0; cnt < 1000; cnt++) {
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_CNTL, &ctrl);
+ if (!(ctrl & (1<<15)))
+ break;
+ msleep(1);
+ }
+ DP(NETIF_MSG_LINK,
+ "control reg 0x%x (after %d ms)\n", ctrl, cnt);
+ }
+
switch (ext_phy_type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
DP(NETIF_MSG_LINK, "XGXS Direct\n");
@@ -2800,49 +3370,235 @@
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
DP(NETIF_MSG_LINK, "XGXS 8705\n");
- bnx2x_bits_en(bp,
- NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- NIG_MASK_MI_INT);
- DP(NETIF_MSG_LINK, "enabled extenal phy int\n");
- bp->phy_addr = ext_phy_type;
- bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_PMD_MISC_CNTL,
0x8288);
- bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_PHY_IDENTIFIER,
0x7fbf);
- bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_CMU_PLL_BYPASS,
0x0100);
- bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_WIS_DEVAD,
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_WIS_DEVAD,
EXT_PHY_OPT_LASI_CNTL, 0x1);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
DP(NETIF_MSG_LINK, "XGXS 8706\n");
- bnx2x_bits_en(bp,
- NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- NIG_MASK_MI_INT);
- DP(NETIF_MSG_LINK, "enabled extenal phy int\n");
- bp->phy_addr = ext_phy_type;
- bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_PMD_DIGITAL_CNT,
- 0x400);
- bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ if (!(bp->req_autoneg & AUTONEG_SPEED)) {
+ /* Force speed */
+ if (bp->req_line_speed == SPEED_10000) {
+ DP(NETIF_MSG_LINK,
+ "XGXS 8706 force 10Gbps\n");
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_PMD_DIGITAL_CNT,
+ 0x400);
+ } else {
+ /* Force 1Gbps */
+ DP(NETIF_MSG_LINK,
+ "XGXS 8706 force 1Gbps\n");
+
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_CNTL,
+ 0x0040);
+
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_CNTL2,
+ 0x000D);
+ }
+
+ /* Enable LASI */
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_LASI_CNTL,
+ 0x1);
+ } else {
+ /* AUTONEG */
+ /* Allow CL37 through CL73 */
+ DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n");
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_AUTO_NEG_DEVAD,
+ EXT_PHY_OPT_AN_CL37_CL73,
+ 0x040c);
+
+ /* Enable Full-Duplex advertisment on CL37 */
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_AUTO_NEG_DEVAD,
+ EXT_PHY_OPT_AN_CL37_FD,
+ 0x0020);
+ /* Enable CL37 AN */
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_AUTO_NEG_DEVAD,
+ EXT_PHY_OPT_AN_CL37_AN,
+ 0x1000);
+ /* Advertise 10G/1G support */
+ if (bp->advertising &
+ ADVERTISED_1000baseT_Full)
+ val = (1<<5);
+ if (bp->advertising &
+ ADVERTISED_10000baseT_Full)
+ val |= (1<<7);
+
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_AUTO_NEG_DEVAD,
+ EXT_PHY_OPT_AN_ADV, val);
+ /* Enable LASI */
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_LASI_CNTL,
+ 0x1);
+
+ /* Enable clause 73 AN */
+ bnx2x_mdio45_write(bp, ext_phy_addr,
+ EXT_PHY_AUTO_NEG_DEVAD,
+ EXT_PHY_OPT_CNTL,
+ 0x1200);
+ }
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+ /* Wait for soft reset to get cleared upto 1 sec */
+ for (cnt = 0; cnt < 1000; cnt++) {
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_CNTL, &ctrl);
+ if (!(ctrl & (1<<15)))
+ break;
+ msleep(1);
+ }
+ DP(NETIF_MSG_LINK,
+ "8072 control reg 0x%x (after %d ms)\n",
+ ctrl, cnt);
+
+ bnx2x_bcm8072_external_rom_boot(bp);
+ DP(NETIF_MSG_LINK, "Finshed loading 8072 KR ROM\n");
+
+ /* enable LASI */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ 0x9000, 0x0400);
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ EXT_PHY_KR_LASI_CNTL, 0x0004);
+
+ /* If this is forced speed, set to KR or KX
+ * (all other are not supported)
+ */
+ if (!(bp->req_autoneg & AUTONEG_SPEED)) {
+ if (bp->req_line_speed == SPEED_10000) {
+ bnx2x_bcm8072_force_10G(bp);
+ DP(NETIF_MSG_LINK,
+ "Forced speed 10G on 8072\n");
+ /* unlock */
+ bnx2x_hw_unlock(bp,
+ HW_LOCK_RESOURCE_8072_MDIO);
+ break;
+ } else
+ val = (1<<5);
+ } else {
+
+ /* Advertise 10G/1G support */
+ if (bp->advertising &
+ ADVERTISED_1000baseT_Full)
+ val = (1<<5);
+ if (bp->advertising &
+ ADVERTISED_10000baseT_Full)
+ val |= (1<<7);
+ }
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ 0x11, val);
+ /* Add support for CL37 ( passive mode ) I */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ 0x8370, 0x040c);
+ /* Add support for CL37 ( passive mode ) II */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ 0xffe4, 0x20);
+ /* Add support for CL37 ( passive mode ) III */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ 0xffe0, 0x1000);
+ /* Restart autoneg */
+ msleep(500);
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_CTRL, 0x1200);
+ DP(NETIF_MSG_LINK, "8072 Autoneg Restart: "
+ "1G %ssupported 10G %ssupported\n",
+ (val & (1<<5)) ? "" : "not ",
+ (val & (1<<7)) ? "" : "not ");
+
+ /* unlock */
+ bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+ DP(NETIF_MSG_LINK,
+ "Setting the SFX7101 LASI indication\n");
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_LASI_CNTL, 0x1);
+ DP(NETIF_MSG_LINK,
+ "Setting the SFX7101 LED to blink on traffic\n");
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ 0xC007, (1<<3));
+
+ /* read modify write pause advertizing */
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_AUTO_NEG_ADVERT, &val);
+ val &= ~EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH;
+ /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
+ if (bp->advertising & ADVERTISED_Pause)
+ val |= EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE;
+
+ if (bp->advertising & ADVERTISED_Asym_Pause) {
+ val |=
+ EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC;
+ }
+ DP(NETIF_MSG_LINK, "SFX7101 AN advertize 0x%x\n", val);
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_AUTO_NEG_ADVERT, val);
+ /* Restart autoneg */
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_CTRL, &val);
+ val |= 0x200;
+ bnx2x_mdio45_write(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_CTRL, val);
break;
default:
- DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
- bp->ext_phy_config);
+ BNX2X_ERR("BAD XGXS ext_phy_config 0x%x\n",
+ bp->ext_phy_config);
break;
}
- bp->phy_addr = local_phy;
} else { /* SerDes */
-/* ext_phy_addr = ((bp->ext_phy_config &
+/* ext_phy_addr = ((bp->ext_phy_config &
PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK) >>
PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT);
*/
@@ -2854,10 +3610,6 @@
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
DP(NETIF_MSG_LINK, "SerDes 5482\n");
- bnx2x_bits_en(bp,
- NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- NIG_MASK_MI_INT);
- DP(NETIF_MSG_LINK, "enabled extenal phy int\n");
break;
default:
@@ -2871,8 +3623,22 @@
static void bnx2x_ext_phy_reset(struct bnx2x *bp)
{
u32 ext_phy_type;
- u32 ext_phy_addr;
- u32 local_phy;
+ u32 ext_phy_addr = ((bp->ext_phy_config &
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK);
+
+ /* The PHY reset is controled by GPIO 1
+ * Give it 1ms of reset pulse
+ */
+ if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) &&
+ (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) {
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+ MISC_REGISTERS_GPIO_OUTPUT_LOW);
+ msleep(1);
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+ MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+ }
if (bp->phy_flags & PHY_XGXS_FLAG) {
ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
@@ -2883,15 +3649,24 @@
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
- DP(NETIF_MSG_LINK, "XGXS 8705/6\n");
- local_phy = bp->phy_addr;
- ext_phy_addr = ((bp->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
- bp->phy_addr = (u8)ext_phy_addr;
- bnx2x_mdio45_write(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ DP(NETIF_MSG_LINK, "XGXS 8705/8706\n");
+ bnx2x_mdio45_write(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_CNTL, 0xa040);
- bp->phy_addr = local_phy;
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ DP(NETIF_MSG_LINK, "XGXS 8072\n");
+ bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ 0, 1<<15);
+ bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+ DP(NETIF_MSG_LINK, "XGXS SFX7101\n");
break;
default:
@@ -2930,6 +3705,7 @@
NIG_MASK_SERDES0_LINK_STATUS |
NIG_MASK_MI_INT));
+ /* Activate the external PHY */
bnx2x_ext_phy_reset(bp);
bnx2x_set_aer_mmd(bp);
@@ -2994,13 +3770,13 @@
/* AN enabled */
bnx2x_set_brcm_cl37_advertisment(bp);
- /* program duplex & pause advertisment (for aneg) */
+ /* program duplex & pause advertisement (for aneg) */
bnx2x_set_ieee_aneg_advertisment(bp);
/* enable autoneg */
bnx2x_set_autoneg(bp);
- /* enalbe and restart AN */
+ /* enable and restart AN */
bnx2x_restart_autoneg(bp);
}
@@ -3010,11 +3786,11 @@
bnx2x_initialize_sgmii_process(bp);
}
- /* enable the interrupt */
- bnx2x_link_int_enable(bp);
-
/* init ext phy and enable link state int */
bnx2x_ext_phy_init(bp);
+
+ /* enable the interrupt */
+ bnx2x_link_int_enable(bp);
}
static void bnx2x_phy_deassert(struct bnx2x *bp)
@@ -3073,6 +3849,11 @@
static void bnx2x_link_reset(struct bnx2x *bp)
{
int port = bp->port;
+ u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK);
+
+ /* update shared memory */
+ bp->link_status = 0;
+ bnx2x_update_mng(bp);
/* disable attentions */
bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
@@ -3081,21 +3862,45 @@
NIG_MASK_SERDES0_LINK_STATUS |
NIG_MASK_MI_INT));
- bnx2x_ext_phy_reset(bp);
+ /* activate nig drain */
+ NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+
+ /* disable nig egress interface */
+ NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0);
+ NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
+
+ /* Stop BigMac rx */
+ bnx2x_bmac_rx_disable(bp);
+
+ /* disable emac */
+ NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0);
+
+ msleep(10);
+
+ /* The PHY reset is controled by GPIO 1
+ * Hold it as output low
+ */
+ if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) &&
+ (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) {
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+ MISC_REGISTERS_GPIO_OUTPUT_LOW);
+ DP(NETIF_MSG_LINK, "reset external PHY\n");
+ }
/* reset the SerDes/XGXS */
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR,
(0x1ff << (port*16)));
- /* reset EMAC / BMAC and disable NIG interfaces */
+ /* reset BigMac */
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+ (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+
+ /* disable nig ingress interface */
NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0);
- NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0);
-
- NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0);
NIG_WR(NIG_REG_EMAC0_IN_EN + port*4, 0);
- NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
- NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+ /* set link down */
+ bp->link_up = 0;
}
#ifdef BNX2X_XGXS_LB
@@ -3158,7 +3963,7 @@
int port = bp->port;
DP(NETIF_MSG_TIMER,
- "spe (%x:%x) command %x hw_cid %x data (%x:%x) left %x\n",
+ "spe (%x:%x) command %d hw_cid %x data (%x:%x) left %x\n",
(u32)U64_HI(bp->spq_mapping), (u32)(U64_LO(bp->spq_mapping) +
(void *)bp->spq_prod_bd - (void *)bp->spq), command,
HW_CID(bp, cid), data_hi, data_lo, bp->spq_left);
@@ -3176,6 +3981,7 @@
bnx2x_panic();
return -EBUSY;
}
+
/* CID needs port number to be encoded int it */
bp->spq_prod_bd->hdr.conn_and_cmd_data =
cpu_to_le32(((command << SPE_HDR_CMD_ID_SHIFT) |
@@ -3282,8 +4088,8 @@
u32 igu_addr = (IGU_ADDR_ATTN_BITS_SET + IGU_PORT_BASE * port) * 8;
u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
MISC_REG_AEU_MASK_ATTN_FUNC_0;
- u32 nig_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
- NIG_REG_MASK_INTERRUPT_PORT0;
+ u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
+ NIG_REG_MASK_INTERRUPT_PORT0;
if (~bp->aeu_mask & (asserted & 0xff))
BNX2X_ERR("IGU ERROR\n");
@@ -3301,15 +4107,11 @@
if (asserted & ATTN_HARD_WIRED_MASK) {
if (asserted & ATTN_NIG_FOR_FUNC) {
- u32 nig_status_port;
- u32 nig_int_addr = port ?
- NIG_REG_STATUS_INTERRUPT_PORT1 :
- NIG_REG_STATUS_INTERRUPT_PORT0;
- bp->nig_mask = REG_RD(bp, nig_mask_addr);
- REG_WR(bp, nig_mask_addr, 0);
+ /* save nig interrupt mask */
+ bp->nig_mask = REG_RD(bp, nig_int_mask_addr);
+ REG_WR(bp, nig_int_mask_addr, 0);
- nig_status_port = REG_RD(bp, nig_int_addr);
bnx2x_link_update(bp);
/* handle unicore attn? */
@@ -3362,15 +4164,132 @@
/* now set back the mask */
if (asserted & ATTN_NIG_FOR_FUNC)
- REG_WR(bp, nig_mask_addr, bp->nig_mask);
+ REG_WR(bp, nig_int_mask_addr, bp->nig_mask);
+}
+
+static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
+{
+ int port = bp->port;
+ int reg_offset;
+ u32 val;
+
+ if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) {
+
+ reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
+ MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+
+ val = REG_RD(bp, reg_offset);
+ val &= ~AEU_INPUTS_ATTN_BITS_SPIO5;
+ REG_WR(bp, reg_offset, val);
+
+ BNX2X_ERR("SPIO5 hw attention\n");
+
+ switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+ case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
+ /* Fan failure attention */
+
+ /* The PHY reset is controled by GPIO 1 */
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+ MISC_REGISTERS_GPIO_OUTPUT_LOW);
+ /* Low power mode is controled by GPIO 2 */
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+ MISC_REGISTERS_GPIO_OUTPUT_LOW);
+ /* mark the failure */
+ bp->ext_phy_config &=
+ ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
+ bp->ext_phy_config |=
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
+ SHMEM_WR(bp,
+ dev_info.port_hw_config[port].
+ external_phy_config,
+ bp->ext_phy_config);
+ /* log the failure */
+ printk(KERN_ERR PFX "Fan Failure on Network"
+ " Controller %s has caused the driver to"
+ " shutdown the card to prevent permanent"
+ " damage. Please contact Dell Support for"
+ " assistance\n", bp->dev->name);
+ break;
+
+ default:
+ break;
+ }
+ }
+}
+
+static inline void bnx2x_attn_int_deasserted1(struct bnx2x *bp, u32 attn)
+{
+ u32 val;
+
+ if (attn & BNX2X_DOORQ_ASSERT) {
+
+ val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR);
+ BNX2X_ERR("DB hw attention 0x%x\n", val);
+ /* DORQ discard attention */
+ if (val & 0x2)
+ BNX2X_ERR("FATAL error from DORQ\n");
+ }
+}
+
+static inline void bnx2x_attn_int_deasserted2(struct bnx2x *bp, u32 attn)
+{
+ u32 val;
+
+ if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
+
+ val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR);
+ BNX2X_ERR("CFC hw attention 0x%x\n", val);
+ /* CFC error attention */
+ if (val & 0x2)
+ BNX2X_ERR("FATAL error from CFC\n");
+ }
+
+ if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
+
+ val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0);
+ BNX2X_ERR("PXP hw attention 0x%x\n", val);
+ /* RQ_USDMDP_FIFO_OVERFLOW */
+ if (val & 0x18000)
+ BNX2X_ERR("FATAL error from PXP\n");
+ }
+}
+
+static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
+{
+ if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) {
+
+ if (attn & BNX2X_MC_ASSERT_BITS) {
+
+ BNX2X_ERR("MC assert!\n");
+ REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_10, 0);
+ REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_9, 0);
+ REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_8, 0);
+ REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_7, 0);
+ bnx2x_panic();
+
+ } else if (attn & BNX2X_MCP_ASSERT) {
+
+ BNX2X_ERR("MCP assert!\n");
+ REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_11, 0);
+ bnx2x_mc_assert(bp);
+
+ } else
+ BNX2X_ERR("Unknown HW assert! (attn 0x%x)\n", attn);
+ }
+
+ if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) {
+
+ REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff);
+ BNX2X_ERR("LATCHED attention 0x%x (masked)\n", attn);
+ }
}
static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
{
- int port = bp->port;
- int index;
struct attn_route attn;
struct attn_route group_mask;
+ int port = bp->port;
+ int index;
u32 reg_addr;
u32 val;
@@ -3391,64 +4310,14 @@
DP(NETIF_MSG_HW, "group[%d]: %llx\n", index,
(unsigned long long)group_mask.sig[0]);
- if (attn.sig[3] & group_mask.sig[3] &
- EVEREST_GEN_ATTN_IN_USE_MASK) {
-
- if (attn.sig[3] & BNX2X_MC_ASSERT_BITS) {
-
- BNX2X_ERR("MC assert!\n");
- bnx2x_panic();
-
- } else if (attn.sig[3] & BNX2X_MCP_ASSERT) {
-
- BNX2X_ERR("MCP assert!\n");
- REG_WR(bp,
- MISC_REG_AEU_GENERAL_ATTN_11, 0);
- bnx2x_mc_assert(bp);
-
- } else {
- BNX2X_ERR("UNKOWEN HW ASSERT!\n");
- }
- }
-
- if (attn.sig[1] & group_mask.sig[1] &
- BNX2X_DOORQ_ASSERT) {
-
- val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR);
- BNX2X_ERR("DB hw attention 0x%x\n", val);
- /* DORQ discard attention */
- if (val & 0x2)
- BNX2X_ERR("FATAL error from DORQ\n");
- }
-
- if (attn.sig[2] & group_mask.sig[2] &
- AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
-
- val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR);
- BNX2X_ERR("CFC hw attention 0x%x\n", val);
- /* CFC error attention */
- if (val & 0x2)
- BNX2X_ERR("FATAL error from CFC\n");
- }
-
- if (attn.sig[2] & group_mask.sig[2] &
- AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
-
- val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0);
- BNX2X_ERR("PXP hw attention 0x%x\n", val);
- /* RQ_USDMDP_FIFO_OVERFLOW */
- if (val & 0x18000)
- BNX2X_ERR("FATAL error from PXP\n");
- }
-
- if (attn.sig[3] & group_mask.sig[3] &
- EVEREST_LATCHED_ATTN_IN_USE_MASK) {
-
- REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL,
- 0x7ff);
- DP(NETIF_MSG_HW, "got latched bits 0x%x\n",
- attn.sig[3]);
- }
+ bnx2x_attn_int_deasserted3(bp,
+ attn.sig[3] & group_mask.sig[3]);
+ bnx2x_attn_int_deasserted1(bp,
+ attn.sig[1] & group_mask.sig[1]);
+ bnx2x_attn_int_deasserted2(bp,
+ attn.sig[2] & group_mask.sig[2]);
+ bnx2x_attn_int_deasserted0(bp,
+ attn.sig[0] & group_mask.sig[0]);
if ((attn.sig[0] & group_mask.sig[0] &
HW_INTERRUT_ASSERT_SET_0) ||
@@ -3456,7 +4325,15 @@
HW_INTERRUT_ASSERT_SET_1) ||
(attn.sig[2] & group_mask.sig[2] &
HW_INTERRUT_ASSERT_SET_2))
- BNX2X_ERR("FATAL HW block attention\n");
+ BNX2X_ERR("FATAL HW block attention"
+ " set0 0x%x set1 0x%x"
+ " set2 0x%x\n",
+ (attn.sig[0] & group_mask.sig[0] &
+ HW_INTERRUT_ASSERT_SET_0),
+ (attn.sig[1] & group_mask.sig[1] &
+ HW_INTERRUT_ASSERT_SET_1),
+ (attn.sig[2] & group_mask.sig[2] &
+ HW_INTERRUT_ASSERT_SET_2));
if ((attn.sig[0] & group_mask.sig[0] &
HW_PRTY_ASSERT_SET_0) ||
@@ -3464,7 +4341,7 @@
HW_PRTY_ASSERT_SET_1) ||
(attn.sig[2] & group_mask.sig[2] &
HW_PRTY_ASSERT_SET_2))
- BNX2X_ERR("FATAL HW block parity atention\n");
+ BNX2X_ERR("FATAL HW block parity attention\n");
}
}
@@ -3529,7 +4406,7 @@
/* Return here if interrupt is disabled */
if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
- DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
+ DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n");
return;
}
@@ -3539,12 +4416,11 @@
DP(NETIF_MSG_INTR, "got a slowpath interrupt (updated %x)\n", status);
- if (status & 0x1) {
- /* HW attentions */
+ /* HW attentions */
+ if (status & 0x1)
bnx2x_attn_int(bp);
- }
- /* CStorm events: query_stats, cfc delete ramrods */
+ /* CStorm events: query_stats, port delete ramrod */
if (status & 0x2)
bp->stat_pending = 0;
@@ -3558,6 +4434,7 @@
IGU_INT_NOP, 1);
bnx2x_ack_sb(bp, DEF_SB_ID, TSTORM_ID, le16_to_cpu(bp->def_t_idx),
IGU_INT_ENABLE, 1);
+
}
static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
@@ -3567,11 +4444,11 @@
/* Return here if interrupt is disabled */
if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
- DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
+ DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n");
return IRQ_HANDLED;
}
- bnx2x_ack_sb(bp, 16, XSTORM_ID, 0, IGU_INT_DISABLE, 0);
+ bnx2x_ack_sb(bp, DEF_SB_ID, XSTORM_ID, 0, IGU_INT_DISABLE, 0);
#ifdef BNX2X_STOP_ON_ERROR
if (unlikely(bp->panic))
@@ -3906,7 +4783,7 @@
while (bp->stats_state != STATS_STATE_DISABLE) {
if (!timeout) {
- BNX2X_ERR("timeout wating for stats stop\n");
+ BNX2X_ERR("timeout waiting for stats stop\n");
break;
}
timeout--;
@@ -4173,39 +5050,37 @@
nstats->rx_bytes = bnx2x_hilo(&estats->total_bytes_received_hi);
- nstats->tx_bytes =
- bnx2x_hilo(&estats->total_bytes_transmitted_hi);
+ nstats->tx_bytes = bnx2x_hilo(&estats->total_bytes_transmitted_hi);
- nstats->rx_dropped = estats->checksum_discard +
- estats->mac_discard;
+ nstats->rx_dropped = estats->checksum_discard + estats->mac_discard;
nstats->tx_dropped = 0;
nstats->multicast =
bnx2x_hilo(&estats->total_multicast_packets_transmitted_hi);
- nstats->collisions =
- estats->single_collision_transmit_frames +
- estats->multiple_collision_transmit_frames +
- estats->late_collision_frames +
- estats->excessive_collision_frames;
+ nstats->collisions = estats->single_collision_transmit_frames +
+ estats->multiple_collision_transmit_frames +
+ estats->late_collision_frames +
+ estats->excessive_collision_frames;
nstats->rx_length_errors = estats->runt_packets_received +
estats->jabber_packets_received;
- nstats->rx_over_errors = estats->no_buff_discard;
+ nstats->rx_over_errors = estats->brb_discard +
+ estats->brb_truncate_discard;
nstats->rx_crc_errors = estats->crc_receive_errors;
nstats->rx_frame_errors = estats->alignment_errors;
- nstats->rx_fifo_errors = estats->brb_discard +
- estats->brb_truncate_discard;
+ nstats->rx_fifo_errors = estats->no_buff_discard;
nstats->rx_missed_errors = estats->xxoverflow_discard;
nstats->rx_errors = nstats->rx_length_errors +
nstats->rx_over_errors +
nstats->rx_crc_errors +
nstats->rx_frame_errors +
- nstats->rx_fifo_errors;
+ nstats->rx_fifo_errors +
+ nstats->rx_missed_errors;
nstats->tx_aborted_errors = estats->late_collision_frames +
- estats->excessive_collision_frames;
+ estats->excessive_collision_frames;
nstats->tx_carrier_errors = estats->false_carrier_detections;
nstats->tx_fifo_errors = 0;
nstats->tx_heartbeat_errors = 0;
@@ -4334,7 +5209,7 @@
return;
if (atomic_read(&bp->intr_sem) != 0)
- goto bnx2x_restart_timer;
+ goto timer_restart;
if (poll) {
struct bnx2x_fastpath *fp = &bp->fp[0];
@@ -4344,7 +5219,7 @@
rc = bnx2x_rx_int(fp, 1000);
}
- if (!nomcp && (bp->bc_ver >= 0x040003)) {
+ if (!nomcp) {
int port = bp->port;
u32 drv_pulse;
u32 mcp_pulse;
@@ -4353,9 +5228,9 @@
bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK;
/* TBD - add SYSTEM_TIME */
drv_pulse = bp->fw_drv_pulse_wr_seq;
- SHMEM_WR(bp, drv_fw_mb[port].drv_pulse_mb, drv_pulse);
+ SHMEM_WR(bp, func_mb[port].drv_pulse_mb, drv_pulse);
- mcp_pulse = (SHMEM_RD(bp, drv_fw_mb[port].mcp_pulse_mb) &
+ mcp_pulse = (SHMEM_RD(bp, func_mb[port].mcp_pulse_mb) &
MCP_PULSE_SEQ_MASK);
/* The delta between driver pulse and mcp response
* should be 1 (before mcp response) or 0 (after mcp response)
@@ -4369,11 +5244,11 @@
}
if (bp->stats_state == STATS_STATE_DISABLE)
- goto bnx2x_restart_timer;
+ goto timer_restart;
bnx2x_update_stats(bp);
-bnx2x_restart_timer:
+timer_restart:
mod_timer(&bp->timer, jiffies + bp->current_interval);
}
@@ -4438,6 +5313,9 @@
atten_status_block);
def_sb->atten_status_block.status_block_id = id;
+ bp->def_att_idx = 0;
+ bp->attn_state = 0;
+
reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
@@ -4472,6 +5350,8 @@
u_def_status_block);
def_sb->u_def_status_block.status_block_id = id;
+ bp->def_u_idx = 0;
+
REG_WR(bp, BAR_USTRORM_INTMEM +
USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section));
REG_WR(bp, BAR_USTRORM_INTMEM +
@@ -4489,6 +5369,8 @@
c_def_status_block);
def_sb->c_def_status_block.status_block_id = id;
+ bp->def_c_idx = 0;
+
REG_WR(bp, BAR_CSTRORM_INTMEM +
CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section));
REG_WR(bp, BAR_CSTRORM_INTMEM +
@@ -4506,6 +5388,8 @@
t_def_status_block);
def_sb->t_def_status_block.status_block_id = id;
+ bp->def_t_idx = 0;
+
REG_WR(bp, BAR_TSTRORM_INTMEM +
TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section));
REG_WR(bp, BAR_TSTRORM_INTMEM +
@@ -4523,6 +5407,8 @@
x_def_status_block);
def_sb->x_def_status_block.status_block_id = id;
+ bp->def_x_idx = 0;
+
REG_WR(bp, BAR_XSTRORM_INTMEM +
XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section));
REG_WR(bp, BAR_XSTRORM_INTMEM +
@@ -4535,6 +5421,8 @@
REG_WR16(bp, BAR_XSTRORM_INTMEM +
XSTORM_DEF_SB_HC_DISABLE_OFFSET(port, index), 0x1);
+ bp->stat_pending = 0;
+
bnx2x_ack_sb(bp, id, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
}
@@ -4626,7 +5514,7 @@
fp->rx_bd_prod = fp->rx_comp_prod = ring_prod;
fp->rx_pkt = fp->rx_calls = 0;
- /* Warning! this will genrate an interrupt (to the TSTORM) */
+ /* Warning! this will generate an interrupt (to the TSTORM) */
/* must only be done when chip is initialized */
REG_WR(bp, BAR_TSTRORM_INTMEM +
TSTORM_RCQ_PROD_OFFSET(port, j), ring_prod);
@@ -4678,7 +5566,6 @@
bp->spq_left = MAX_SPQ_PENDING;
bp->spq_prod_idx = 0;
- bp->dsb_sp_prod_idx = 0;
bp->dsb_sp_prod = BNX2X_SP_DSB_INDEX;
bp->spq_prod_bd = bp->spq;
bp->spq_last_bd = bp->spq_prod_bd + MAX_SP_DESC_CNT;
@@ -4755,6 +5642,42 @@
REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
}
+static void bnx2x_set_client_config(struct bnx2x *bp)
+{
+#ifdef BCM_VLAN
+ int mode = bp->rx_mode;
+#endif
+ int i, port = bp->port;
+ struct tstorm_eth_client_config tstorm_client = {0};
+
+ tstorm_client.mtu = bp->dev->mtu;
+ tstorm_client.statistics_counter_id = 0;
+ tstorm_client.config_flags =
+ TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE;
+#ifdef BCM_VLAN
+ if (mode && bp->vlgrp) {
+ tstorm_client.config_flags |=
+ TSTORM_ETH_CLIENT_CONFIG_VLAN_REMOVAL_ENABLE;
+ DP(NETIF_MSG_IFUP, "vlan removal enabled\n");
+ }
+#endif
+ if (mode != BNX2X_RX_MODE_PROMISC)
+ tstorm_client.drop_flags =
+ TSTORM_ETH_CLIENT_CONFIG_DROP_MAC_ERR;
+
+ for_each_queue(bp, i) {
+ REG_WR(bp, BAR_TSTRORM_INTMEM +
+ TSTORM_CLIENT_CONFIG_OFFSET(port, i),
+ ((u32 *)&tstorm_client)[0]);
+ REG_WR(bp, BAR_TSTRORM_INTMEM +
+ TSTORM_CLIENT_CONFIG_OFFSET(port, i) + 4,
+ ((u32 *)&tstorm_client)[1]);
+ }
+
+/* DP(NETIF_MSG_IFUP, "tstorm_client: 0x%08x 0x%08x\n",
+ ((u32 *)&tstorm_client)[0], ((u32 *)&tstorm_client)[1]); */
+}
+
static void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
{
int mode = bp->rx_mode;
@@ -4794,41 +5717,9 @@
/* DP(NETIF_MSG_IFUP, "tstorm_mac_filter[%d]: 0x%08x\n", i,
((u32 *)&tstorm_mac_filter)[i]); */
}
-}
-static void bnx2x_set_client_config(struct bnx2x *bp, int client_id)
-{
-#ifdef BCM_VLAN
- int mode = bp->rx_mode;
-#endif
- int port = bp->port;
- struct tstorm_eth_client_config tstorm_client = {0};
-
- tstorm_client.mtu = bp->dev->mtu;
- tstorm_client.statistics_counter_id = 0;
- tstorm_client.config_flags =
- TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE;
-#ifdef BCM_VLAN
- if (mode && bp->vlgrp) {
- tstorm_client.config_flags |=
- TSTORM_ETH_CLIENT_CONFIG_VLAN_REMOVAL_ENABLE;
- DP(NETIF_MSG_IFUP, "vlan removal enabled\n");
- }
-#endif
- tstorm_client.drop_flags = (TSTORM_ETH_CLIENT_CONFIG_DROP_IP_CS_ERR |
- TSTORM_ETH_CLIENT_CONFIG_DROP_TCP_CS_ERR |
- TSTORM_ETH_CLIENT_CONFIG_DROP_UDP_CS_ERR |
- TSTORM_ETH_CLIENT_CONFIG_DROP_MAC_ERR);
-
- REG_WR(bp, BAR_TSTRORM_INTMEM +
- TSTORM_CLIENT_CONFIG_OFFSET(port, client_id),
- ((u32 *)&tstorm_client)[0]);
- REG_WR(bp, BAR_TSTRORM_INTMEM +
- TSTORM_CLIENT_CONFIG_OFFSET(port, client_id) + 4,
- ((u32 *)&tstorm_client)[1]);
-
-/* DP(NETIF_MSG_IFUP, "tstorm_client: 0x%08x 0x%08x\n",
- ((u32 *)&tstorm_client)[0], ((u32 *)&tstorm_client)[1]); */
+ if (mode != BNX2X_RX_MODE_NONE)
+ bnx2x_set_client_config(bp);
}
static void bnx2x_init_internal(struct bnx2x *bp)
@@ -4836,7 +5727,6 @@
int port = bp->port;
struct tstorm_eth_function_common_config tstorm_config = {0};
struct stats_indication_flags stats_flags = {0};
- int i;
if (is_multi(bp)) {
tstorm_config.config_flags = MULTI_FLAGS;
@@ -4850,13 +5740,9 @@
/* DP(NETIF_MSG_IFUP, "tstorm_config: 0x%08x\n",
(*(u32 *)&tstorm_config)); */
- bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx untill link is up */
+ bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx until link is up */
bnx2x_set_storm_rx_mode(bp);
- for_each_queue(bp, i)
- bnx2x_set_client_config(bp, i);
-
-
stats_flags.collect_eth = cpu_to_le32(1);
REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(port),
@@ -4902,7 +5788,7 @@
bnx2x_init_internal(bp);
bnx2x_init_stats(bp);
bnx2x_init_ind_table(bp);
- bnx2x_enable_int(bp);
+ bnx2x_int_enable(bp);
}
@@ -5265,8 +6151,10 @@
if (mode & 0x1) { /* init common */
DP(BNX2X_MSG_MCP, "starting common init func %d mode %x\n",
func, mode);
- REG_WR(bp, MISC_REG_RESET_REG_1, 0xffffffff);
- REG_WR(bp, MISC_REG_RESET_REG_2, 0xfffc);
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+ 0xffffffff);
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+ 0xfffc);
bnx2x_init_block(bp, MISC_COMMON_START, MISC_COMMON_END);
REG_WR(bp, MISC_REG_LCPLL_CTRL_REG_2, 0x100);
@@ -5359,7 +6247,7 @@
REG_RD(bp, USEM_REG_PASSIVE_BUFFER + 8);
#endif
bnx2x_init_block(bp, QM_COMMON_START, QM_COMMON_END);
- /* softrest pulse */
+ /* soft reset pulse */
REG_WR(bp, QM_REG_SOFT_RESET, 1);
REG_WR(bp, QM_REG_SOFT_RESET, 0);
@@ -5413,7 +6301,7 @@
REG_WR(bp, SRC_REG_SOFT_RST, 1);
for (i = SRC_REG_KEYRSS0_0; i <= SRC_REG_KEYRSS1_9; i += 4) {
REG_WR(bp, i, 0xc0cac01a);
- /* TODO: repleace with something meaningfull */
+ /* TODO: replace with something meaningful */
}
/* SRCH COMMON comes here */
REG_WR(bp, SRC_REG_SOFT_RST, 0);
@@ -5486,6 +6374,28 @@
enable_blocks_attention(bp);
/* enable_blocks_parity(bp); */
+ switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+ case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
+ /* Fan failure is indicated by SPIO 5 */
+ bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5,
+ MISC_REGISTERS_SPIO_INPUT_HI_Z);
+
+ /* set to active low mode */
+ val = REG_RD(bp, MISC_REG_SPIO_INT);
+ val |= ((1 << MISC_REGISTERS_SPIO_5) <<
+ MISC_REGISTERS_SPIO_INT_OLD_SET_POS);
+ REG_WR(bp, MISC_REG_SPIO_INT, val);
+
+ /* enable interrupt to signal the IGU */
+ val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN);
+ val |= (1 << MISC_REGISTERS_SPIO_5);
+ REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val);
+ break;
+
+ default:
+ break;
+ }
+
} /* end of common init */
/* per port init */
@@ -5645,9 +6555,21 @@
/* Port MCP comes here */
/* Port DMAE comes here */
+ switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+ case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
+ /* add SPIO 5 to group 0 */
+ val = REG_RD(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+ val |= AEU_INPUTS_ATTN_BITS_SPIO5;
+ REG_WR(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, val);
+ break;
+
+ default:
+ break;
+ }
+
bnx2x_link_reset(bp);
- /* Reset pciex errors for debug */
+ /* Reset PCIE errors for debug */
REG_WR(bp, 0x2114, 0xffffffff);
REG_WR(bp, 0x2120, 0xffffffff);
REG_WR(bp, 0x2814, 0xffffffff);
@@ -5669,9 +6591,9 @@
port = bp->port;
bp->fw_drv_pulse_wr_seq =
- (SHMEM_RD(bp, drv_fw_mb[port].drv_pulse_mb) &
+ (SHMEM_RD(bp, func_mb[port].drv_pulse_mb) &
DRV_PULSE_SEQ_MASK);
- bp->fw_mb = SHMEM_RD(bp, drv_fw_mb[port].fw_mb_param);
+ bp->fw_mb = SHMEM_RD(bp, func_mb[port].fw_mb_param);
DP(BNX2X_MSG_MCP, "drv_pulse 0x%x fw_mb 0x%x\n",
bp->fw_drv_pulse_wr_seq, bp->fw_mb);
} else {
@@ -5681,16 +6603,15 @@
return 0;
}
-
-/* send the MCP a request, block untill there is a reply */
+/* send the MCP a request, block until there is a reply */
static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command)
{
- u32 rc = 0;
- u32 seq = ++bp->fw_seq;
int port = bp->port;
+ u32 seq = ++bp->fw_seq;
+ u32 rc = 0;
- SHMEM_WR(bp, drv_fw_mb[port].drv_mb_header, command|seq);
- DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", command|seq);
+ SHMEM_WR(bp, func_mb[port].drv_mb_header, (command | seq));
+ DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq));
/* let the FW do it's magic ... */
msleep(100); /* TBD */
@@ -5698,19 +6619,20 @@
if (CHIP_REV_IS_SLOW(bp))
msleep(900);
- rc = SHMEM_RD(bp, drv_fw_mb[port].fw_mb_header);
-
+ rc = SHMEM_RD(bp, func_mb[port].fw_mb_header);
DP(BNX2X_MSG_MCP, "read (%x) seq is (%x) from FW MB\n", rc, seq);
/* is this a reply to our command? */
if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) {
rc &= FW_MSG_CODE_MASK;
+
} else {
/* FW BUG! */
BNX2X_ERR("FW failed to respond!\n");
bnx2x_fw_dump(bp);
rc = 0;
}
+
return rc;
}
@@ -5869,7 +6791,7 @@
for (i = 0; i < 16*1024; i += 64)
* (u64 *)((char *)bp->t2 + i + 56) = bp->t2_mapping + i + 64;
- /* now sixup the last line in the block to point to the next block */
+ /* now fixup the last line in the block to point to the next block */
*(u64 *)((char *)bp->t2 + 1024*16-8) = bp->t2_mapping;
/* Timer block array (MAX_CONN*8) phys uncached for now 1024 conns */
@@ -5950,22 +6872,19 @@
int i;
free_irq(bp->msix_table[0].vector, bp->dev);
- DP(NETIF_MSG_IFDOWN, "rleased sp irq (%d)\n",
+ DP(NETIF_MSG_IFDOWN, "released sp irq (%d)\n",
bp->msix_table[0].vector);
for_each_queue(bp, i) {
- DP(NETIF_MSG_IFDOWN, "about to rlease fp #%d->%d irq "
+ DP(NETIF_MSG_IFDOWN, "about to release fp #%d->%d irq "
"state(%x)\n", i, bp->msix_table[i + 1].vector,
bnx2x_fp(bp, i, state));
- if (bnx2x_fp(bp, i, state) != BNX2X_FP_STATE_CLOSED) {
+ if (bnx2x_fp(bp, i, state) != BNX2X_FP_STATE_CLOSED)
+ BNX2X_ERR("IRQ of fp #%d being freed while "
+ "state != closed\n", i);
- free_irq(bp->msix_table[i + 1].vector, &bp->fp[i]);
- bnx2x_fp(bp, i, state) = BNX2X_FP_STATE_CLOSED;
-
- } else
- DP(NETIF_MSG_IFDOWN, "irq not freed\n");
-
+ free_irq(bp->msix_table[i + 1].vector, &bp->fp[i]);
}
}
@@ -5995,7 +6914,7 @@
if (pci_enable_msix(bp->pdev, &bp->msix_table[0],
bp->num_queues + 1)){
- BNX2X_ERR("failed to enable msix\n");
+ BNX2X_LOG("failed to enable MSI-X\n");
return -1;
}
@@ -6010,11 +6929,8 @@
static int bnx2x_req_msix_irqs(struct bnx2x *bp)
{
-
int i, rc;
- DP(NETIF_MSG_IFUP, "about to request sp irq\n");
-
rc = request_irq(bp->msix_table[0].vector, bnx2x_msix_sp_int, 0,
bp->dev->name, bp->dev);
@@ -6029,7 +6945,8 @@
bp->dev->name, &bp->fp[i]);
if (rc) {
- BNX2X_ERR("request fp #%d irq failed\n", i);
+ BNX2X_ERR("request fp #%d irq failed "
+ "rc %d\n", i, rc);
bnx2x_free_msix_irqs(bp);
return -EBUSY;
}
@@ -6109,8 +7026,8 @@
/* can take a while if any port is running */
int timeout = 500;
- /* DP("waiting for state to become %d on IDX [%d]\n",
- state, sb_idx); */
+ DP(NETIF_MSG_IFUP, "%s for state to become %x on IDX [%d]\n",
+ poll ? "polling" : "waiting", state, idx);
might_sleep();
@@ -6128,7 +7045,7 @@
mb(); /* state is changed by bnx2x_sp_event()*/
- if (*state_p != state)
+ if (*state_p == state)
return 0;
timeout--;
@@ -6136,17 +7053,17 @@
}
-
/* timeout! */
- BNX2X_ERR("timeout waiting for ramrod %d on %d\n", state, idx);
- return -EBUSY;
+ BNX2X_ERR("timeout %s for state %x on IDX [%d]\n",
+ poll ? "polling" : "waiting", state, idx);
+ return -EBUSY;
}
static int bnx2x_setup_leading(struct bnx2x *bp)
{
- /* reset IGU staae */
+ /* reset IGU state */
bnx2x_ack_sb(bp, DEF_SB_ID, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
/* SETUP ramrod */
@@ -6162,12 +7079,13 @@
/* reset IGU state */
bnx2x_ack_sb(bp, index, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
+ /* SETUP ramrod */
bp->fp[index].state = BNX2X_FP_STATE_OPENING;
bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_CLIENT_SETUP, index, 0, index, 0);
/* Wait for completion */
return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_OPEN, index,
- &(bp->fp[index].state), 1);
+ &(bp->fp[index].state), 0);
}
@@ -6177,8 +7095,8 @@
static int bnx2x_nic_load(struct bnx2x *bp, int req_irq)
{
- int rc;
- int i = 0;
+ u32 load_code;
+ int i;
bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
@@ -6188,26 +7106,28 @@
initialized, otherwise - not.
*/
if (!nomcp) {
- rc = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
- if (rc == FW_MSG_CODE_DRV_LOAD_REFUSED) {
+ load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
+ if (!load_code) {
+ BNX2X_ERR("MCP response failure, unloading\n");
+ return -EBUSY;
+ }
+ if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) {
+ BNX2X_ERR("MCP refused load request, unloading\n");
return -EBUSY; /* other port in diagnostic mode */
}
} else {
- rc = FW_MSG_CODE_DRV_LOAD_COMMON;
+ load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
}
- DP(NETIF_MSG_IFUP, "set number of queues to %d\n", bp->num_queues);
-
/* if we can't use msix we only need one fp,
* so try to enable msix with the requested number of fp's
* and fallback to inta with one fp
*/
if (req_irq) {
-
if (use_inta) {
bp->num_queues = 1;
} else {
- if (use_multi > 1 && use_multi <= 16)
+ if ((use_multi > 1) && (use_multi <= 16))
/* user requested number */
bp->num_queues = use_multi;
else if (use_multi == 1)
@@ -6216,15 +7136,17 @@
bp->num_queues = 1;
if (bnx2x_enable_msix(bp)) {
- /* faild to enable msix */
+ /* failed to enable msix */
bp->num_queues = 1;
if (use_multi)
- BNX2X_ERR("Muti requested but failed"
+ BNX2X_ERR("Multi requested but failed"
" to enable MSI-X\n");
}
}
}
+ DP(NETIF_MSG_IFUP, "set number of queues to %d\n", bp->num_queues);
+
if (bnx2x_alloc_mem(bp))
return -ENOMEM;
@@ -6232,13 +7154,13 @@
if (bp->flags & USING_MSIX_FLAG) {
if (bnx2x_req_msix_irqs(bp)) {
pci_disable_msix(bp->pdev);
- goto out_error;
+ goto load_error;
}
} else {
if (bnx2x_req_irq(bp)) {
BNX2X_ERR("IRQ request failed, aborting\n");
- goto out_error;
+ goto load_error;
}
}
}
@@ -6249,31 +7171,25 @@
/* Initialize HW */
- if (bnx2x_function_init(bp, (rc == FW_MSG_CODE_DRV_LOAD_COMMON))) {
+ if (bnx2x_function_init(bp,
+ (load_code == FW_MSG_CODE_DRV_LOAD_COMMON))) {
BNX2X_ERR("HW init failed, aborting\n");
- goto out_error;
+ goto load_error;
}
atomic_set(&bp->intr_sem, 0);
- /* Reenable SP tasklet */
- /*if (bp->sp_task_en) { */
- /* tasklet_enable(&bp->sp_task);*/
- /*} else { */
- /* bp->sp_task_en = 1; */
- /*} */
/* Setup NIC internals and enable interrupts */
bnx2x_nic_init(bp);
/* Send LOAD_DONE command to MCP */
if (!nomcp) {
- rc = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE);
- DP(NETIF_MSG_IFUP, "rc = 0x%x\n", rc);
- if (!rc) {
+ load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE);
+ if (!load_code) {
BNX2X_ERR("MCP response failure, unloading\n");
- goto int_disable;
+ goto load_int_disable;
}
}
@@ -6285,11 +7201,11 @@
napi_enable(&bnx2x_fp(bp, i, napi));
if (bnx2x_setup_leading(bp))
- goto stop_netif;
+ goto load_stop_netif;
for_each_nondefault_queue(bp, i)
if (bnx2x_setup_multi(bp, i))
- goto stop_netif;
+ goto load_stop_netif;
bnx2x_set_mac_addr(bp);
@@ -6313,42 +7229,24 @@
return 0;
-stop_netif:
+load_stop_netif:
for_each_queue(bp, i)
napi_disable(&bnx2x_fp(bp, i, napi));
-int_disable:
- bnx2x_disable_int_sync(bp);
+load_int_disable:
+ bnx2x_int_disable_sync(bp);
bnx2x_free_skbs(bp);
bnx2x_free_irq(bp);
-out_error:
+load_error:
bnx2x_free_mem(bp);
/* TBD we really need to reset the chip
if we want to recover from this */
- return rc;
+ return -EBUSY;
}
-static void bnx2x_netif_stop(struct bnx2x *bp)
-{
- int i;
-
- bp->rx_mode = BNX2X_RX_MODE_NONE;
- bnx2x_set_storm_rx_mode(bp);
-
- bnx2x_disable_int_sync(bp);
- bnx2x_link_reset(bp);
-
- for_each_queue(bp, i)
- napi_disable(&bnx2x_fp(bp, i, napi));
-
- if (netif_running(bp->dev)) {
- netif_tx_disable(bp->dev);
- bp->dev->trans_start = jiffies; /* prevent tx timeout */
- }
-}
static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code)
{
@@ -6401,20 +7299,20 @@
int rc;
- /* halt the connnection */
+ /* halt the connection */
bp->fp[index].state = BNX2X_FP_STATE_HALTING;
bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, index, 0, 0, 0);
rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_HALTED, index,
&(bp->fp[index].state), 1);
- if (rc) /* timout */
+ if (rc) /* timeout */
return rc;
/* delete cfc entry */
bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_CFC_DEL, index, 0, 0, 1);
- return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_DELETED, index,
+ return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_CLOSED, index,
&(bp->fp[index].state), 1);
}
@@ -6422,8 +7320,8 @@
static void bnx2x_stop_leading(struct bnx2x *bp)
{
-
- /* if the other port is hadling traffic,
+ u16 dsb_sp_prod_idx;
+ /* if the other port is handling traffic,
this can take a lot of time */
int timeout = 500;
@@ -6437,52 +7335,71 @@
&(bp->fp[0].state), 1))
return;
- bp->dsb_sp_prod_idx = *bp->dsb_sp_prod;
+ dsb_sp_prod_idx = *bp->dsb_sp_prod;
- /* Send CFC_DELETE ramrod */
+ /* Send PORT_DELETE ramrod */
bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_PORT_DEL, 0, 0, 0, 1);
- /*
- Wait for completion.
+ /* Wait for completion to arrive on default status block
we are going to reset the chip anyway
so there is not much to do if this times out
*/
- while (bp->dsb_sp_prod_idx == *bp->dsb_sp_prod && timeout) {
- timeout--;
- msleep(1);
+ while ((dsb_sp_prod_idx == *bp->dsb_sp_prod) && timeout) {
+ timeout--;
+ msleep(1);
}
-
+ if (!timeout) {
+ DP(NETIF_MSG_IFDOWN, "timeout polling for completion "
+ "dsb_sp_prod 0x%x != dsb_sp_prod_idx 0x%x\n",
+ *bp->dsb_sp_prod, dsb_sp_prod_idx);
+ }
+ bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD;
+ bp->fp[0].state = BNX2X_FP_STATE_CLOSED;
}
-static int bnx2x_nic_unload(struct bnx2x *bp, int fre_irq)
+
+static int bnx2x_nic_unload(struct bnx2x *bp, int free_irq)
{
u32 reset_code = 0;
- int rc;
- int i;
+ int i, timeout;
bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
- /* Calling flush_scheduled_work() may deadlock because
- * linkwatch_event() may be on the workqueue and it will try to get
- * the rtnl_lock which we are holding.
- */
-
- while (bp->in_reset_task)
- msleep(1);
-
- /* Delete the timer: do it before disabling interrupts, as it
- may be stil STAT_QUERY ramrod pending after stopping the timer */
del_timer_sync(&bp->timer);
+ bp->rx_mode = BNX2X_RX_MODE_NONE;
+ bnx2x_set_storm_rx_mode(bp);
+
+ if (netif_running(bp->dev)) {
+ netif_tx_disable(bp->dev);
+ bp->dev->trans_start = jiffies; /* prevent tx timeout */
+ }
+
+ /* Wait until all fast path tasks complete */
+ for_each_queue(bp, i) {
+ struct bnx2x_fastpath *fp = &bp->fp[i];
+
+ timeout = 1000;
+ while (bnx2x_has_work(fp) && (timeout--))
+ msleep(1);
+ if (!timeout)
+ BNX2X_ERR("timeout waiting for queue[%d]\n", i);
+ }
+
/* Wait until stat ramrod returns and all SP tasks complete */
- while (bp->stat_pending && (bp->spq_left != MAX_SPQ_PENDING))
+ timeout = 1000;
+ while ((bp->stat_pending || (bp->spq_left != MAX_SPQ_PENDING)) &&
+ (timeout--))
msleep(1);
- /* Stop fast path, disable MAC, disable interrupts, disable napi */
- bnx2x_netif_stop(bp);
+ for_each_queue(bp, i)
+ napi_disable(&bnx2x_fp(bp, i, napi));
+ /* Disable interrupts after Tx and Rx are disabled on stack level */
+ bnx2x_int_disable_sync(bp);
if (bp->flags & NO_WOL_FLAG)
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP;
+
else if (bp->wol) {
u32 emac_base = bp->port ? GRCBASE_EMAC0 : GRCBASE_EMAC1;
u8 *mac_addr = bp->dev->dev_addr;
@@ -6499,28 +7416,37 @@
EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + 4, val);
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
+
} else
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
+ /* Close multi and leading connections */
for_each_nondefault_queue(bp, i)
if (bnx2x_stop_multi(bp, i))
- goto error;
-
+ goto unload_error;
bnx2x_stop_leading(bp);
+ if ((bp->state != BNX2X_STATE_CLOSING_WAIT4_UNLOAD) ||
+ (bp->fp[0].state != BNX2X_FP_STATE_CLOSED)) {
+ DP(NETIF_MSG_IFDOWN, "failed to close leading properly!"
+ "state 0x%x fp[0].state 0x%x",
+ bp->state, bp->fp[0].state);
+ }
-error:
+unload_error:
+ bnx2x_link_reset(bp);
+
if (!nomcp)
- rc = bnx2x_fw_command(bp, reset_code);
+ reset_code = bnx2x_fw_command(bp, reset_code);
else
- rc = FW_MSG_CODE_DRV_UNLOAD_COMMON;
+ reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON;
/* Release IRQs */
- if (fre_irq)
+ if (free_irq)
bnx2x_free_irq(bp);
/* Reset the chip */
- bnx2x_reset_chip(bp, rc);
+ bnx2x_reset_chip(bp, reset_code);
/* Report UNLOAD_DONE to MCP */
if (!nomcp)
@@ -6531,8 +7457,7 @@
bnx2x_free_mem(bp);
bp->state = BNX2X_STATE_CLOSED;
- /* Set link down */
- bp->link_up = 0;
+
netif_carrier_off(bp->dev);
return 0;
@@ -6568,7 +7493,7 @@
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
- SUPPORTED_2500baseT_Full |
+ SUPPORTED_2500baseX_Full |
SUPPORTED_TP | SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
@@ -6581,10 +7506,10 @@
bp->phy_flags |= PHY_SGMII_FLAG;
- bp->supported |= (/* SUPPORTED_10baseT_Half |
- SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |*/
+ bp->supported |= (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_TP | SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
@@ -6620,7 +7545,7 @@
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
- SUPPORTED_2500baseT_Full |
+ SUPPORTED_2500baseX_Full |
SUPPORTED_10000baseT_Full |
SUPPORTED_TP | SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
@@ -6629,9 +7554,8 @@
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
- BNX2X_DEV_INFO("ext_phy_type 0x%x (8705/6)\n",
- ext_phy_type);
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (8705)\n",
+ ext_phy_type);
bp->supported |= (SUPPORTED_10000baseT_Full |
SUPPORTED_FIBRE |
@@ -6639,6 +7563,41 @@
SUPPORTED_Asym_Pause);
break;
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (8706)\n",
+ ext_phy_type);
+
+ bp->supported |= (SUPPORTED_10000baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (8072)\n",
+ ext_phy_type);
+
+ bp->supported |= (SUPPORTED_10000baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (SFX7101)\n",
+ ext_phy_type);
+
+ bp->supported |= (SUPPORTED_10000baseT_Full |
+ SUPPORTED_TP |
+ SUPPORTED_Autoneg |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
+ break;
+
default:
BNX2X_ERR("NVRAM config error. "
"BAD XGXS ext_phy_config 0x%x\n",
@@ -6691,7 +7650,7 @@
SUPPORTED_1000baseT_Full);
if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
- bp->supported &= ~SUPPORTED_2500baseT_Full;
+ bp->supported &= ~SUPPORTED_2500baseX_Full;
if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G))
bp->supported &= ~SUPPORTED_10000baseT_Full;
@@ -6711,13 +7670,8 @@
bp->req_line_speed = 0;
bp->advertising = bp->supported;
} else {
- u32 ext_phy_type;
-
- ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
- if ((ext_phy_type ==
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
- (ext_phy_type ==
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706)) {
+ if (XGXS_EXT_PHY_TYPE(bp) ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) {
/* force 10G, no AN */
bp->req_line_speed = SPEED_10000;
bp->advertising =
@@ -6734,8 +7688,7 @@
break;
case PORT_FEATURE_LINK_SPEED_10M_FULL:
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) {
+ if (bp->supported & SUPPORTED_10baseT_Full) {
bp->req_line_speed = SPEED_10;
bp->advertising = (ADVERTISED_10baseT_Full |
ADVERTISED_TP);
@@ -6749,8 +7702,7 @@
break;
case PORT_FEATURE_LINK_SPEED_10M_HALF:
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) {
+ if (bp->supported & SUPPORTED_10baseT_Half) {
bp->req_line_speed = SPEED_10;
bp->req_duplex = DUPLEX_HALF;
bp->advertising = (ADVERTISED_10baseT_Half |
@@ -6765,8 +7717,7 @@
break;
case PORT_FEATURE_LINK_SPEED_100M_FULL:
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) {
+ if (bp->supported & SUPPORTED_100baseT_Full) {
bp->req_line_speed = SPEED_100;
bp->advertising = (ADVERTISED_100baseT_Full |
ADVERTISED_TP);
@@ -6780,8 +7731,7 @@
break;
case PORT_FEATURE_LINK_SPEED_100M_HALF:
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) {
+ if (bp->supported & SUPPORTED_100baseT_Half) {
bp->req_line_speed = SPEED_100;
bp->req_duplex = DUPLEX_HALF;
bp->advertising = (ADVERTISED_100baseT_Half |
@@ -6796,8 +7746,7 @@
break;
case PORT_FEATURE_LINK_SPEED_1G:
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) {
+ if (bp->supported & SUPPORTED_1000baseT_Full) {
bp->req_line_speed = SPEED_1000;
bp->advertising = (ADVERTISED_1000baseT_Full |
ADVERTISED_TP);
@@ -6811,10 +7760,9 @@
break;
case PORT_FEATURE_LINK_SPEED_2_5G:
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) {
+ if (bp->supported & SUPPORTED_2500baseX_Full) {
bp->req_line_speed = SPEED_2500;
- bp->advertising = (ADVERTISED_2500baseT_Full |
+ bp->advertising = (ADVERTISED_2500baseX_Full |
ADVERTISED_TP);
} else {
BNX2X_ERR("NVRAM config error. "
@@ -6828,15 +7776,7 @@
case PORT_FEATURE_LINK_SPEED_10G_CX4:
case PORT_FEATURE_LINK_SPEED_10G_KX4:
case PORT_FEATURE_LINK_SPEED_10G_KR:
- if (!(bp->phy_flags & PHY_XGXS_FLAG)) {
- BNX2X_ERR("NVRAM config error. "
- "Invalid link_config 0x%x"
- " phy_flags 0x%x\n",
- bp->link_config, bp->phy_flags);
- return;
- }
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
+ if (bp->supported & SUPPORTED_10000baseT_Full) {
bp->req_line_speed = SPEED_10000;
bp->advertising = (ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
@@ -6863,43 +7803,13 @@
bp->req_flow_ctrl = (bp->link_config &
PORT_FEATURE_FLOW_CONTROL_MASK);
- /* Please refer to Table 28B-3 of the 802.3ab-1999 spec */
- switch (bp->req_flow_ctrl) {
- case FLOW_CTRL_AUTO:
+ if ((bp->req_flow_ctrl == FLOW_CTRL_AUTO) &&
+ (bp->supported & SUPPORTED_Autoneg))
bp->req_autoneg |= AUTONEG_FLOW_CTRL;
- if (bp->dev->mtu <= 4500) {
- bp->pause_mode = PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- } else {
- bp->pause_mode = PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
- }
- break;
- case FLOW_CTRL_TX:
- bp->pause_mode = PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
- break;
-
- case FLOW_CTRL_RX:
- case FLOW_CTRL_BOTH:
- bp->pause_mode = PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- break;
-
- case FLOW_CTRL_NONE:
- default:
- bp->pause_mode = PAUSE_NONE;
- bp->advertising &= ~(ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- break;
- }
- BNX2X_DEV_INFO("req_autoneg 0x%x req_flow_ctrl 0x%x\n"
- KERN_INFO " pause_mode %d advertising 0x%x\n",
- bp->req_autoneg, bp->req_flow_ctrl,
- bp->pause_mode, bp->advertising);
+ BNX2X_DEV_INFO("req_autoneg 0x%x req_flow_ctrl 0x%x"
+ " advertising 0x%x\n",
+ bp->req_autoneg, bp->req_flow_ctrl, bp->advertising);
}
static void bnx2x_get_hwinfo(struct bnx2x *bp)
@@ -6933,15 +7843,15 @@
val = SHMEM_RD(bp, validity_map[port]);
if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
!= (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
- BNX2X_ERR("MCP validity signature bad\n");
+ BNX2X_ERR("BAD MCP validity signature\n");
- bp->fw_seq = (SHMEM_RD(bp, drv_fw_mb[port].drv_mb_header) &
+ bp->fw_seq = (SHMEM_RD(bp, func_mb[port].drv_mb_header) &
DRV_MSG_SEQ_NUMBER_MASK);
bp->hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config);
-
+ bp->board = SHMEM_RD(bp, dev_info.shared_hw_config.board);
bp->serdes_config =
- SHMEM_RD(bp, dev_info.port_hw_config[bp->port].serdes_config);
+ SHMEM_RD(bp, dev_info.port_hw_config[port].serdes_config);
bp->lane_config =
SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config);
bp->ext_phy_config =
@@ -6954,13 +7864,13 @@
bp->link_config =
SHMEM_RD(bp, dev_info.port_feature_config[port].link_config);
- BNX2X_DEV_INFO("hw_config (%08x) serdes_config (%08x)\n"
+ BNX2X_DEV_INFO("hw_config (%08x) board (%08x) serdes_config (%08x)\n"
KERN_INFO " lane_config (%08x) ext_phy_config (%08x)\n"
KERN_INFO " speed_cap_mask (%08x) link_config (%08x)"
" fw_seq (%08x)\n",
- bp->hw_config, bp->serdes_config, bp->lane_config,
- bp->ext_phy_config, bp->speed_cap_mask,
- bp->link_config, bp->fw_seq);
+ bp->hw_config, bp->board, bp->serdes_config,
+ bp->lane_config, bp->ext_phy_config,
+ bp->speed_cap_mask, bp->link_config, bp->fw_seq);
switch_cfg = (bp->link_config & PORT_FEATURE_CONNECTED_SWITCH_MASK);
bnx2x_link_settings_supported(bp, switch_cfg);
@@ -7014,14 +7924,8 @@
return;
set_mac: /* only supposed to happen on emulation/FPGA */
- BNX2X_ERR("warning constant MAC workaround active\n");
- bp->dev->dev_addr[0] = 0;
- bp->dev->dev_addr[1] = 0x50;
- bp->dev->dev_addr[2] = 0xc2;
- bp->dev->dev_addr[3] = 0x2c;
- bp->dev->dev_addr[4] = 0x71;
- bp->dev->dev_addr[5] = port ? 0x0d : 0x0e;
-
+ BNX2X_ERR("warning rendom MAC workaround active\n");
+ random_ether_addr(bp->dev->dev_addr);
memcpy(bp->dev->perm_addr, bp->dev->dev_addr, 6);
}
@@ -7048,19 +7952,34 @@
}
if (bp->phy_flags & PHY_XGXS_FLAG) {
- cmd->port = PORT_FIBRE;
- } else {
+ u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+
+ switch (ext_phy_type) {
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ cmd->port = PORT_FIBRE;
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+ cmd->port = PORT_TP;
+ break;
+
+ default:
+ DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
+ bp->ext_phy_config);
+ }
+ } else
cmd->port = PORT_TP;
- }
cmd->phy_address = bp->phy_addr;
cmd->transceiver = XCVR_INTERNAL;
- if (bp->req_autoneg & AUTONEG_SPEED) {
+ if (bp->req_autoneg & AUTONEG_SPEED)
cmd->autoneg = AUTONEG_ENABLE;
- } else {
+ else
cmd->autoneg = AUTONEG_DISABLE;
- }
cmd->maxtxpkt = 0;
cmd->maxrxpkt = 0;
@@ -7091,8 +8010,10 @@
switch (cmd->port) {
case PORT_TP:
- if (!(bp->supported & SUPPORTED_TP))
+ if (!(bp->supported & SUPPORTED_TP)) {
+ DP(NETIF_MSG_LINK, "TP not supported\n");
return -EINVAL;
+ }
if (bp->phy_flags & PHY_XGXS_FLAG) {
bnx2x_link_reset(bp);
@@ -7102,8 +8023,10 @@
break;
case PORT_FIBRE:
- if (!(bp->supported & SUPPORTED_FIBRE))
+ if (!(bp->supported & SUPPORTED_FIBRE)) {
+ DP(NETIF_MSG_LINK, "FIBRE not supported\n");
return -EINVAL;
+ }
if (!(bp->phy_flags & PHY_XGXS_FLAG)) {
bnx2x_link_reset(bp);
@@ -7113,12 +8036,15 @@
break;
default:
+ DP(NETIF_MSG_LINK, "Unknown port type\n");
return -EINVAL;
}
if (cmd->autoneg == AUTONEG_ENABLE) {
- if (!(bp->supported & SUPPORTED_Autoneg))
+ if (!(bp->supported & SUPPORTED_Autoneg)) {
+ DP(NETIF_MSG_LINK, "Aotoneg not supported\n");
return -EINVAL;
+ }
/* advertise the requested speed and duplex if supported */
cmd->advertising &= bp->supported;
@@ -7133,14 +8059,22 @@
switch (cmd->speed) {
case SPEED_10:
if (cmd->duplex == DUPLEX_FULL) {
- if (!(bp->supported & SUPPORTED_10baseT_Full))
+ if (!(bp->supported &
+ SUPPORTED_10baseT_Full)) {
+ DP(NETIF_MSG_LINK,
+ "10M full not supported\n");
return -EINVAL;
+ }
advertising = (ADVERTISED_10baseT_Full |
ADVERTISED_TP);
} else {
- if (!(bp->supported & SUPPORTED_10baseT_Half))
+ if (!(bp->supported &
+ SUPPORTED_10baseT_Half)) {
+ DP(NETIF_MSG_LINK,
+ "10M half not supported\n");
return -EINVAL;
+ }
advertising = (ADVERTISED_10baseT_Half |
ADVERTISED_TP);
@@ -7150,15 +8084,21 @@
case SPEED_100:
if (cmd->duplex == DUPLEX_FULL) {
if (!(bp->supported &
- SUPPORTED_100baseT_Full))
+ SUPPORTED_100baseT_Full)) {
+ DP(NETIF_MSG_LINK,
+ "100M full not supported\n");
return -EINVAL;
+ }
advertising = (ADVERTISED_100baseT_Full |
ADVERTISED_TP);
} else {
if (!(bp->supported &
- SUPPORTED_100baseT_Half))
+ SUPPORTED_100baseT_Half)) {
+ DP(NETIF_MSG_LINK,
+ "100M half not supported\n");
return -EINVAL;
+ }
advertising = (ADVERTISED_100baseT_Half |
ADVERTISED_TP);
@@ -7166,39 +8106,54 @@
break;
case SPEED_1000:
- if (cmd->duplex != DUPLEX_FULL)
+ if (cmd->duplex != DUPLEX_FULL) {
+ DP(NETIF_MSG_LINK, "1G half not supported\n");
return -EINVAL;
+ }
- if (!(bp->supported & SUPPORTED_1000baseT_Full))
+ if (!(bp->supported & SUPPORTED_1000baseT_Full)) {
+ DP(NETIF_MSG_LINK, "1G full not supported\n");
return -EINVAL;
+ }
advertising = (ADVERTISED_1000baseT_Full |
ADVERTISED_TP);
break;
case SPEED_2500:
- if (cmd->duplex != DUPLEX_FULL)
+ if (cmd->duplex != DUPLEX_FULL) {
+ DP(NETIF_MSG_LINK,
+ "2.5G half not supported\n");
return -EINVAL;
+ }
- if (!(bp->supported & SUPPORTED_2500baseT_Full))
+ if (!(bp->supported & SUPPORTED_2500baseX_Full)) {
+ DP(NETIF_MSG_LINK,
+ "2.5G full not supported\n");
return -EINVAL;
+ }
- advertising = (ADVERTISED_2500baseT_Full |
+ advertising = (ADVERTISED_2500baseX_Full |
ADVERTISED_TP);
break;
case SPEED_10000:
- if (cmd->duplex != DUPLEX_FULL)
+ if (cmd->duplex != DUPLEX_FULL) {
+ DP(NETIF_MSG_LINK, "10G half not supported\n");
return -EINVAL;
+ }
- if (!(bp->supported & SUPPORTED_10000baseT_Full))
+ if (!(bp->supported & SUPPORTED_10000baseT_Full)) {
+ DP(NETIF_MSG_LINK, "10G full not supported\n");
return -EINVAL;
+ }
advertising = (ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
break;
default:
+ DP(NETIF_MSG_LINK, "Unsupported speed\n");
return -EINVAL;
}
@@ -7398,8 +8353,7 @@
static int bnx2x_nvram_read_dword(struct bnx2x *bp, u32 offset, u32 *ret_val,
u32 cmd_flags)
{
- int rc;
- int count, i;
+ int count, i, rc;
u32 val;
/* build the command word */
@@ -7452,13 +8406,13 @@
if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) {
DP(NETIF_MSG_NVM,
- "Invalid paramter: offset 0x%x buf_size 0x%x\n",
+ "Invalid parameter: offset 0x%x buf_size 0x%x\n",
offset, buf_size);
return -EINVAL;
}
if (offset + buf_size > bp->flash_size) {
- DP(NETIF_MSG_NVM, "Invalid paramter: offset (0x%x) +"
+ DP(NETIF_MSG_NVM, "Invalid parameter: offset (0x%x) +"
" buf_size (0x%x) > flash_size (0x%x)\n",
offset, buf_size, bp->flash_size);
return -EINVAL;
@@ -7519,8 +8473,7 @@
static int bnx2x_nvram_write_dword(struct bnx2x *bp, u32 offset, u32 val,
u32 cmd_flags)
{
- int rc;
- int count, i;
+ int count, i, rc;
/* build the command word */
cmd_flags |= MCPR_NVM_COMMAND_DOIT | MCPR_NVM_COMMAND_WR;
@@ -7557,7 +8510,7 @@
return rc;
}
-#define BYTE_OFFSET(offset) (8 * (offset & 0x03))
+#define BYTE_OFFSET(offset) (8 * (offset & 0x03))
static int bnx2x_nvram_write1(struct bnx2x *bp, u32 offset, u8 *data_buf,
int buf_size)
@@ -7568,7 +8521,7 @@
u32 val;
if (offset + buf_size > bp->flash_size) {
- DP(NETIF_MSG_NVM, "Invalid paramter: offset (0x%x) +"
+ DP(NETIF_MSG_NVM, "Invalid parameter: offset (0x%x) +"
" buf_size (0x%x) > flash_size (0x%x)\n",
offset, buf_size, bp->flash_size);
return -EINVAL;
@@ -7621,13 +8574,13 @@
if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) {
DP(NETIF_MSG_NVM,
- "Invalid paramter: offset 0x%x buf_size 0x%x\n",
+ "Invalid parameter: offset 0x%x buf_size 0x%x\n",
offset, buf_size);
return -EINVAL;
}
if (offset + buf_size > bp->flash_size) {
- DP(NETIF_MSG_NVM, "Invalid paramter: offset (0x%x) +"
+ DP(NETIF_MSG_NVM, "Invalid parameter: offset (0x%x) +"
" buf_size (0x%x) > flash_size (0x%x)\n",
offset, buf_size, bp->flash_size);
return -EINVAL;
@@ -7788,52 +8741,29 @@
DP_LEVEL " autoneg %d rx_pause %d tx_pause %d\n",
epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause);
- bp->req_flow_ctrl = FLOW_CTRL_AUTO;
if (epause->autoneg) {
- bp->req_autoneg |= AUTONEG_FLOW_CTRL;
- if (bp->dev->mtu <= 4500) {
- bp->pause_mode = PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- } else {
- bp->pause_mode = PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
+ if (!(bp->supported & SUPPORTED_Autoneg)) {
+ DP(NETIF_MSG_LINK, "Aotoneg not supported\n");
+ return -EINVAL;
}
- } else {
+ bp->req_autoneg |= AUTONEG_FLOW_CTRL;
+ } else
bp->req_autoneg &= ~AUTONEG_FLOW_CTRL;
- if (epause->rx_pause)
- bp->req_flow_ctrl |= FLOW_CTRL_RX;
- if (epause->tx_pause)
- bp->req_flow_ctrl |= FLOW_CTRL_TX;
+ bp->req_flow_ctrl = FLOW_CTRL_AUTO;
- switch (bp->req_flow_ctrl) {
- case FLOW_CTRL_AUTO:
- bp->req_flow_ctrl = FLOW_CTRL_NONE;
- bp->pause_mode = PAUSE_NONE;
- bp->advertising &= ~(ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- break;
+ if (epause->rx_pause)
+ bp->req_flow_ctrl |= FLOW_CTRL_RX;
+ if (epause->tx_pause)
+ bp->req_flow_ctrl |= FLOW_CTRL_TX;
- case FLOW_CTRL_TX:
- bp->pause_mode = PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
- break;
+ if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) &&
+ (bp->req_flow_ctrl == FLOW_CTRL_AUTO))
+ bp->req_flow_ctrl = FLOW_CTRL_NONE;
- case FLOW_CTRL_RX:
- case FLOW_CTRL_BOTH:
- bp->pause_mode = PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- break;
- }
- }
-
- DP(NETIF_MSG_LINK, "req_autoneg 0x%x req_flow_ctrl 0x%x\n"
- DP_LEVEL " pause_mode %d advertising 0x%x\n",
- bp->req_autoneg, bp->req_flow_ctrl, bp->pause_mode,
- bp->advertising);
+ DP(NETIF_MSG_LINK, "req_autoneg 0x%x req_flow_ctrl 0x%x\n",
+ bp->req_autoneg, bp->req_flow_ctrl);
bnx2x_stop_stats(bp);
bnx2x_link_initialize(bp);
@@ -7906,81 +8836,87 @@
static struct {
char string[ETH_GSTRING_LEN];
} bnx2x_stats_str_arr[BNX2X_NUM_STATS] = {
- { "rx_bytes"}, /* 0 */
- { "rx_error_bytes"}, /* 1 */
- { "tx_bytes"}, /* 2 */
- { "tx_error_bytes"}, /* 3 */
- { "rx_ucast_packets"}, /* 4 */
- { "rx_mcast_packets"}, /* 5 */
- { "rx_bcast_packets"}, /* 6 */
- { "tx_ucast_packets"}, /* 7 */
- { "tx_mcast_packets"}, /* 8 */
- { "tx_bcast_packets"}, /* 9 */
- { "tx_mac_errors"}, /* 10 */
- { "tx_carrier_errors"}, /* 11 */
- { "rx_crc_errors"}, /* 12 */
- { "rx_align_errors"}, /* 13 */
- { "tx_single_collisions"}, /* 14 */
- { "tx_multi_collisions"}, /* 15 */
- { "tx_deferred"}, /* 16 */
- { "tx_excess_collisions"}, /* 17 */
- { "tx_late_collisions"}, /* 18 */
- { "tx_total_collisions"}, /* 19 */
- { "rx_fragments"}, /* 20 */
- { "rx_jabbers"}, /* 21 */
- { "rx_undersize_packets"}, /* 22 */
- { "rx_oversize_packets"}, /* 23 */
- { "rx_xon_frames"}, /* 24 */
- { "rx_xoff_frames"}, /* 25 */
- { "tx_xon_frames"}, /* 26 */
- { "tx_xoff_frames"}, /* 27 */
- { "rx_mac_ctrl_frames"}, /* 28 */
- { "rx_filtered_packets"}, /* 29 */
- { "rx_discards"}, /* 30 */
+ { "rx_bytes"},
+ { "rx_error_bytes"},
+ { "tx_bytes"},
+ { "tx_error_bytes"},
+ { "rx_ucast_packets"},
+ { "rx_mcast_packets"},
+ { "rx_bcast_packets"},
+ { "tx_ucast_packets"},
+ { "tx_mcast_packets"},
+ { "tx_bcast_packets"},
+ { "tx_mac_errors"}, /* 10 */
+ { "tx_carrier_errors"},
+ { "rx_crc_errors"},
+ { "rx_align_errors"},
+ { "tx_single_collisions"},
+ { "tx_multi_collisions"},
+ { "tx_deferred"},
+ { "tx_excess_collisions"},
+ { "tx_late_collisions"},
+ { "tx_total_collisions"},
+ { "rx_fragments"}, /* 20 */
+ { "rx_jabbers"},
+ { "rx_undersize_packets"},
+ { "rx_oversize_packets"},
+ { "rx_xon_frames"},
+ { "rx_xoff_frames"},
+ { "tx_xon_frames"},
+ { "tx_xoff_frames"},
+ { "rx_mac_ctrl_frames"},
+ { "rx_filtered_packets"},
+ { "rx_discards"}, /* 30 */
+ { "brb_discard"},
+ { "brb_truncate"},
+ { "xxoverflow"}
};
#define STATS_OFFSET32(offset_name) \
(offsetof(struct bnx2x_eth_stats, offset_name) / 4)
static unsigned long bnx2x_stats_offset_arr[BNX2X_NUM_STATS] = {
- STATS_OFFSET32(total_bytes_received_hi), /* 0 */
- STATS_OFFSET32(stat_IfHCInBadOctets_hi), /* 1 */
- STATS_OFFSET32(total_bytes_transmitted_hi), /* 2 */
- STATS_OFFSET32(stat_IfHCOutBadOctets_hi), /* 3 */
- STATS_OFFSET32(total_unicast_packets_received_hi), /* 4 */
- STATS_OFFSET32(total_multicast_packets_received_hi), /* 5 */
- STATS_OFFSET32(total_broadcast_packets_received_hi), /* 6 */
- STATS_OFFSET32(total_unicast_packets_transmitted_hi), /* 7 */
- STATS_OFFSET32(total_multicast_packets_transmitted_hi), /* 8 */
- STATS_OFFSET32(total_broadcast_packets_transmitted_hi), /* 9 */
- STATS_OFFSET32(stat_Dot3statsInternalMacTransmitErrors), /* 10 */
- STATS_OFFSET32(stat_Dot3StatsCarrierSenseErrors), /* 11 */
- STATS_OFFSET32(crc_receive_errors), /* 12 */
- STATS_OFFSET32(alignment_errors), /* 13 */
- STATS_OFFSET32(single_collision_transmit_frames), /* 14 */
- STATS_OFFSET32(multiple_collision_transmit_frames), /* 15 */
- STATS_OFFSET32(stat_Dot3StatsDeferredTransmissions), /* 16 */
- STATS_OFFSET32(excessive_collision_frames), /* 17 */
- STATS_OFFSET32(late_collision_frames), /* 18 */
- STATS_OFFSET32(number_of_bugs_found_in_stats_spec), /* 19 */
- STATS_OFFSET32(runt_packets_received), /* 20 */
- STATS_OFFSET32(jabber_packets_received), /* 21 */
- STATS_OFFSET32(error_runt_packets_received), /* 22 */
- STATS_OFFSET32(error_jabber_packets_received), /* 23 */
- STATS_OFFSET32(pause_xon_frames_received), /* 24 */
- STATS_OFFSET32(pause_xoff_frames_received), /* 25 */
- STATS_OFFSET32(pause_xon_frames_transmitted), /* 26 */
- STATS_OFFSET32(pause_xoff_frames_transmitted), /* 27 */
- STATS_OFFSET32(control_frames_received), /* 28 */
- STATS_OFFSET32(mac_filter_discard), /* 29 */
- STATS_OFFSET32(no_buff_discard), /* 30 */
+ STATS_OFFSET32(total_bytes_received_hi),
+ STATS_OFFSET32(stat_IfHCInBadOctets_hi),
+ STATS_OFFSET32(total_bytes_transmitted_hi),
+ STATS_OFFSET32(stat_IfHCOutBadOctets_hi),
+ STATS_OFFSET32(total_unicast_packets_received_hi),
+ STATS_OFFSET32(total_multicast_packets_received_hi),
+ STATS_OFFSET32(total_broadcast_packets_received_hi),
+ STATS_OFFSET32(total_unicast_packets_transmitted_hi),
+ STATS_OFFSET32(total_multicast_packets_transmitted_hi),
+ STATS_OFFSET32(total_broadcast_packets_transmitted_hi),
+ STATS_OFFSET32(stat_Dot3statsInternalMacTransmitErrors), /* 10 */
+ STATS_OFFSET32(stat_Dot3StatsCarrierSenseErrors),
+ STATS_OFFSET32(crc_receive_errors),
+ STATS_OFFSET32(alignment_errors),
+ STATS_OFFSET32(single_collision_transmit_frames),
+ STATS_OFFSET32(multiple_collision_transmit_frames),
+ STATS_OFFSET32(stat_Dot3StatsDeferredTransmissions),
+ STATS_OFFSET32(excessive_collision_frames),
+ STATS_OFFSET32(late_collision_frames),
+ STATS_OFFSET32(number_of_bugs_found_in_stats_spec),
+ STATS_OFFSET32(runt_packets_received), /* 20 */
+ STATS_OFFSET32(jabber_packets_received),
+ STATS_OFFSET32(error_runt_packets_received),
+ STATS_OFFSET32(error_jabber_packets_received),
+ STATS_OFFSET32(pause_xon_frames_received),
+ STATS_OFFSET32(pause_xoff_frames_received),
+ STATS_OFFSET32(pause_xon_frames_transmitted),
+ STATS_OFFSET32(pause_xoff_frames_transmitted),
+ STATS_OFFSET32(control_frames_received),
+ STATS_OFFSET32(mac_filter_discard),
+ STATS_OFFSET32(no_buff_discard), /* 30 */
+ STATS_OFFSET32(brb_discard),
+ STATS_OFFSET32(brb_truncate_discard),
+ STATS_OFFSET32(xxoverflow_discard)
};
static u8 bnx2x_stats_len_arr[BNX2X_NUM_STATS] = {
8, 0, 8, 0, 8, 8, 8, 8, 8, 8,
4, 0, 4, 4, 4, 4, 4, 4, 4, 4,
4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
- 4,
+ 4, 4, 4, 4
};
static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
@@ -8138,9 +9074,7 @@
* net_device service functions
*/
-/* Called with rtnl_lock from vlan functions and also netif_tx_lock
- * from set_multicast.
- */
+/* called with netif_tx_lock from set_multicast */
static void bnx2x_set_rx_mode(struct net_device *dev)
{
struct bnx2x *bp = netdev_priv(dev);
@@ -8314,7 +9248,7 @@
ETH_TX_BD_ETH_ADDR_TYPE_SHIFT);
tx_bd->general_data |= 1; /* header nbd */
- /* remeber the first bd of the packet */
+ /* remember the first bd of the packet */
tx_buf->first_bd = bd_prod;
DP(NETIF_MSG_TX_QUEUED,
@@ -8334,7 +9268,7 @@
/* for now NS flag is not used in Linux */
pbd->global_data = (len |
- ((skb->protocol == ETH_P_8021Q) <<
+ ((skb->protocol == ntohs(ETH_P_8021Q)) <<
ETH_TX_PARSE_BD_LLC_SNAP_EN_SHIFT));
pbd->ip_hlen = ip_hdrlen(skb) / 2;
pbd->total_hlen = cpu_to_le16(len + pbd->ip_hlen);
@@ -8343,7 +9277,7 @@
tx_bd->bd_flags.as_bitfield |=
ETH_TX_BD_FLAGS_TCP_CSUM;
- pbd->tcp_flags = htonl(tcp_flag_word(skb)) & 0xFFFF;
+ pbd->tcp_flags = pbd_tcp_flags(skb);
pbd->total_hlen += cpu_to_le16(tcp_hdrlen(skb) / 2);
pbd->tcp_pseudo_csum = swab16(th->check);
@@ -8387,7 +9321,7 @@
if (skb_shinfo(skb)->gso_size &&
(skb->len > (bp->dev->mtu + ETH_HLEN))) {
- int hlen = 2 * le32_to_cpu(pbd->total_hlen);
+ int hlen = 2 * le16_to_cpu(pbd->total_hlen);
DP(NETIF_MSG_TX_QUEUED,
"TSO packet len %d hlen %d total len %d tso size %d\n",
@@ -8427,7 +9361,7 @@
tx_bd->vlan = cpu_to_le16(pkt_prod);
/* this marks the bd
* as one that has no individual mapping
- * the FW ignors this flag in a bd not maked start
+ * the FW ignores this flag in a bd not marked start
*/
tx_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_SW_LSO;
DP(NETIF_MSG_TX_QUEUED,
@@ -8504,9 +9438,11 @@
DP(NETIF_MSG_TX_QUEUED, "doorbell: nbd %u bd %d\n", nbd, bd_prod);
- fp->hw_tx_prods->bds_prod += cpu_to_le16(nbd);
+ fp->hw_tx_prods->bds_prod =
+ cpu_to_le16(le16_to_cpu(fp->hw_tx_prods->bds_prod) + nbd);
mb(); /* FW restriction: must not reorder writing nbd and packets */
- fp->hw_tx_prods->packets_prod += cpu_to_le32(1);
+ fp->hw_tx_prods->packets_prod =
+ cpu_to_le32(le32_to_cpu(fp->hw_tx_prods->packets_prod) + 1);
DOORBELL(bp, fp_index, 0);
mmiowb();
@@ -8525,11 +9461,6 @@
return NETDEV_TX_OK;
}
-static struct net_device_stats *bnx2x_get_stats(struct net_device *dev)
-{
- return &dev->stats;
-}
-
/* Called with rtnl_lock */
static int bnx2x_open(struct net_device *dev)
{
@@ -8543,16 +9474,13 @@
/* Called with rtnl_lock */
static int bnx2x_close(struct net_device *dev)
{
- int rc;
struct bnx2x *bp = netdev_priv(dev);
/* Unload the driver, release IRQs */
- rc = bnx2x_nic_unload(bp, 1);
- if (rc) {
- BNX2X_ERR("bnx2x_nic_unload failed: %d\n", rc);
- return rc;
- }
- bnx2x_set_power_state(bp, PCI_D3hot);
+ bnx2x_nic_unload(bp, 1);
+
+ if (!CHIP_REV_IS_SLOW(bp))
+ bnx2x_set_power_state(bp, PCI_D3hot);
return 0;
}
@@ -8584,7 +9512,7 @@
case SIOCGMIIPHY:
data->phy_id = bp->phy_addr;
- /* fallthru */
+ /* fallthrough */
case SIOCGMIIREG: {
u32 mii_regval;
@@ -8633,7 +9561,7 @@
return -EINVAL;
/* This does not race with packet allocation
- * because the actuall alloc size is
+ * because the actual alloc size is
* only updated as part of load
*/
dev->mtu = new_mtu;
@@ -8666,7 +9594,7 @@
bp->vlgrp = vlgrp;
if (netif_running(dev))
- bnx2x_set_rx_mode(dev);
+ bnx2x_set_client_config(bp);
}
#endif
@@ -8695,14 +9623,18 @@
if (!netif_running(bp->dev))
return;
- bp->in_reset_task = 1;
+ rtnl_lock();
- bnx2x_netif_stop(bp);
+ if (bp->state != BNX2X_STATE_OPEN) {
+ DP(NETIF_MSG_TX_ERR, "state is %x, returning\n", bp->state);
+ goto reset_task_exit;
+ }
bnx2x_nic_unload(bp, 0);
bnx2x_nic_load(bp, 0);
- bp->in_reset_task = 0;
+reset_task_exit:
+ rtnl_unlock();
}
static int __devinit bnx2x_init_board(struct pci_dev *pdev,
@@ -8783,8 +9715,6 @@
spin_lock_init(&bp->phy_lock);
- bp->in_reset_task = 0;
-
INIT_WORK(&bp->reset_task, bnx2x_reset_task);
INIT_WORK(&bp->sp_task, bnx2x_sp_task);
@@ -8813,7 +9743,7 @@
bnx2x_get_hwinfo(bp);
if (CHIP_REV(bp) == CHIP_REV_FPGA) {
- printk(KERN_ERR PFX "FPGA detacted. MCP disabled,"
+ printk(KERN_ERR PFX "FPGA detected. MCP disabled,"
" will only init first device\n");
onefunc = 1;
nomcp = 1;
@@ -8882,14 +9812,32 @@
return rc;
}
+static int __devinit bnx2x_get_pcie_width(struct bnx2x *bp)
+{
+ u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL);
+
+ val = (val & PCICFG_LINK_WIDTH) >> PCICFG_LINK_WIDTH_SHIFT;
+ return val;
+}
+
+/* return value of 1=2.5GHz 2=5GHz */
+static int __devinit bnx2x_get_pcie_speed(struct bnx2x *bp)
+{
+ u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL);
+
+ val = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT;
+ return val;
+}
+
static int __devinit bnx2x_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
static int version_printed;
struct net_device *dev = NULL;
struct bnx2x *bp;
- int rc, i;
+ int rc;
int port = PCI_FUNC(pdev->devfn);
+ DECLARE_MAC_BUF(mac);
if (version_printed++ == 0)
printk(KERN_INFO "%s", version);
@@ -8906,6 +9854,7 @@
if (port && onefunc) {
printk(KERN_ERR PFX "second function disabled. exiting\n");
+ free_netdev(dev);
return 0;
}
@@ -8918,7 +9867,6 @@
dev->hard_start_xmit = bnx2x_start_xmit;
dev->watchdog_timeo = TX_TIMEOUT;
- dev->get_stats = bnx2x_get_stats;
dev->ethtool_ops = &bnx2x_ethtool_ops;
dev->open = bnx2x_open;
dev->stop = bnx2x_close;
@@ -8944,7 +9892,7 @@
rc = register_netdev(dev);
if (rc) {
- printk(KERN_ERR PFX "Cannot register net device\n");
+ dev_err(&pdev->dev, "Cannot register net device\n");
if (bp->regview)
iounmap(bp->regview);
if (bp->doorbells)
@@ -8959,32 +9907,30 @@
pci_set_drvdata(pdev, dev);
bp->name = board_info[ent->driver_data].name;
- printk(KERN_INFO "%s: %s (%c%d) PCI%s %s %dMHz "
- "found at mem %lx, IRQ %d, ",
- dev->name, bp->name,
+ printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx,"
+ " IRQ %d, ", dev->name, bp->name,
((CHIP_ID(bp) & 0xf000) >> 12) + 'A',
((CHIP_ID(bp) & 0x0ff0) >> 4),
- ((bp->flags & PCIX_FLAG) ? "-X" : ""),
- ((bp->flags & PCI_32BIT_FLAG) ? "32-bit" : "64-bit"),
- bp->bus_speed_mhz,
- dev->base_addr,
- bp->pdev->irq);
-
- printk("node addr ");
- for (i = 0; i < 6; i++)
- printk("%2.2x", dev->dev_addr[i]);
- printk("\n");
-
+ bnx2x_get_pcie_width(bp),
+ (bnx2x_get_pcie_speed(bp) == 2) ? "5GHz (Gen2)" : "2.5GHz",
+ dev->base_addr, bp->pdev->irq);
+ printk(KERN_CONT "node addr %s\n", print_mac(mac, dev->dev_addr));
return 0;
}
static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
- struct bnx2x *bp = netdev_priv(dev);
+ struct bnx2x *bp;
- flush_scheduled_work();
- /*tasklet_kill(&bp->sp_task);*/
+ if (!dev) {
+ /* we get here if init_one() fails */
+ printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n");
+ return;
+ }
+
+ bp = netdev_priv(dev);
+
unregister_netdev(dev);
if (bp->regview)
@@ -9002,34 +9948,43 @@
static int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata(pdev);
- struct bnx2x *bp = netdev_priv(dev);
- int rc;
+ struct bnx2x *bp;
+
+ if (!dev)
+ return 0;
if (!netif_running(dev))
return 0;
- rc = bnx2x_nic_unload(bp, 0);
- if (!rc)
- return rc;
+ bp = netdev_priv(dev);
+
+ bnx2x_nic_unload(bp, 0);
netif_device_detach(dev);
- pci_save_state(pdev);
+ pci_save_state(pdev);
bnx2x_set_power_state(bp, pci_choose_state(pdev, state));
+
return 0;
}
static int bnx2x_resume(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
- struct bnx2x *bp = netdev_priv(dev);
+ struct bnx2x *bp;
int rc;
+ if (!dev) {
+ printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n");
+ return -ENODEV;
+ }
+
if (!netif_running(dev))
return 0;
- pci_restore_state(pdev);
+ bp = netdev_priv(dev);
+ pci_restore_state(pdev);
bnx2x_set_power_state(bp, PCI_D0);
netif_device_attach(dev);
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 4f7ae6f..4f0c0d3 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -1,6 +1,6 @@
/* bnx2x.h: Broadcom Everest network driver.
*
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -24,6 +24,8 @@
#define BNX2X_MSG_STATS 0x20000 /* was: NETIF_MSG_TIMER */
#define NETIF_MSG_NVM 0x40000 /* was: NETIF_MSG_HW */
#define NETIF_MSG_DMAE 0x80000 /* was: NETIF_MSG_HW */
+#define BNX2X_MSG_SP 0x100000 /* was: NETIF_MSG_INTR */
+#define BNX2X_MSG_FP 0x200000 /* was: NETIF_MSG_INTR */
#define DP_LEVEL KERN_NOTICE /* was: KERN_DEBUG */
@@ -40,6 +42,12 @@
__LINE__, bp->dev?(bp->dev->name):"?", ##__args); \
} while (0)
+/* for logging (never masked) */
+#define BNX2X_LOG(__fmt, __args...) do { \
+ printk(KERN_NOTICE "[%s:%d(%s)]" __fmt, __FUNCTION__, \
+ __LINE__, bp->dev?(bp->dev->name):"?", ##__args); \
+ } while (0)
+
/* before we have a dev->name use dev_info() */
#define BNX2X_DEV_INFO(__fmt, __args...) do { \
if (bp->msglevel & NETIF_MSG_PROBE) \
@@ -423,8 +431,6 @@
#define BNX2X_FP_STATE_OPEN 0xa0000
#define BNX2X_FP_STATE_HALTING 0xb0000
#define BNX2X_FP_STATE_HALTED 0xc0000
-#define BNX2X_FP_STATE_DELETED 0xd0000
-#define BNX2X_FP_STATE_CLOSE_IRQ 0xe0000
int index;
@@ -505,7 +511,6 @@
struct eth_spe *spq;
dma_addr_t spq_mapping;
u16 spq_prod_idx;
- u16 dsb_sp_prod_idx;
struct eth_spe *spq_prod_bd;
struct eth_spe *spq_last_bd;
u16 *dsb_sp_prod;
@@ -517,7 +522,7 @@
*/
u8 stat_pending;
- /* End of fileds used in the performance code paths */
+ /* End of fields used in the performance code paths */
int panic;
int msglevel;
@@ -540,8 +545,6 @@
spinlock_t phy_lock;
struct work_struct reset_task;
- u16 in_reset_task;
-
struct work_struct sp_task;
struct timer_list timer;
@@ -555,7 +558,6 @@
#define CHIP_ID(bp) (((bp)->chip_id) & 0xfffffff0)
#define CHIP_NUM(bp) (((bp)->chip_id) & 0xffff0000)
-#define CHIP_NUM_5710 0x57100000
#define CHIP_REV(bp) (((bp)->chip_id) & 0x0000f000)
#define CHIP_REV_Ax 0x00000000
@@ -574,7 +576,8 @@
u32 fw_mb;
u32 hw_config;
- u32 serdes_config;
+ u32 board;
+ u32 serdes_config;
u32 lane_config;
u32 ext_phy_config;
#define XGXS_EXT_PHY_TYPE(bp) (bp->ext_phy_config & \
@@ -595,11 +598,11 @@
u8 tx_lane_swap;
u8 link_up;
+ u8 phy_link_up;
u32 supported;
/* link settings - missing defines */
#define SUPPORTED_2500baseT_Full (1 << 15)
-#define SUPPORTED_CX4 (1 << 16)
u32 phy_flags;
/*#define PHY_SERDES_FLAG 0x1*/
@@ -644,16 +647,9 @@
#define FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH
#define FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE
- u32 pause_mode;
-#define PAUSE_NONE 0
-#define PAUSE_SYMMETRIC 1
-#define PAUSE_ASYMMETRIC 2
-#define PAUSE_BOTH 3
-
u32 advertising;
/* link settings - missing defines */
#define ADVERTISED_2500baseT_Full (1 << 15)
-#define ADVERTISED_CX4 (1 << 16)
u32 link_status;
u32 line_speed;
@@ -667,6 +663,8 @@
#define NVRAM_TIMEOUT_COUNT 30000
#define NVRAM_PAGE_SIZE 256
+ u8 wol;
+
int rx_ring_size;
u16 tx_quick_cons_trip_int;
@@ -718,9 +716,6 @@
#endif
char *name;
- u16 bus_speed_mhz;
- u8 wol;
- u8 pad;
/* used to synchronize stats collecting */
int stats_state;
@@ -856,8 +851,8 @@
#define MAX_SPQ_PENDING 8
-#define BNX2X_NUM_STATS 31
-#define BNX2X_NUM_TESTS 2
+#define BNX2X_NUM_STATS 34
+#define BNX2X_NUM_TESTS 1
#define DPM_TRIGER_TYPE 0x40
@@ -867,6 +862,15 @@
DPM_TRIGER_TYPE); \
} while (0)
+/* PCIE link and speed */
+#define PCICFG_LINK_WIDTH 0x1f00000
+#define PCICFG_LINK_WIDTH_SHIFT 20
+#define PCICFG_LINK_SPEED 0xf0000
+#define PCICFG_LINK_SPEED_SHIFT 16
+
+#define BMAC_CONTROL_RX_ENABLE 2
+
+#define pbd_tcp_flags(skb) (ntohl(tcp_flag_word(tcp_hdr(skb)))>>16 & 0xff)
/* stuff added to make the code fit 80Col */
@@ -939,13 +943,13 @@
#define LINK_16GTFD LINK_STATUS_SPEED_AND_DUPLEX_16GTFD
#define LINK_16GXFD LINK_STATUS_SPEED_AND_DUPLEX_16GXFD
-#define NIG_STATUS_INTERRUPT_XGXS0_LINK10G \
+#define NIG_STATUS_XGXS0_LINK10G \
NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G
-#define NIG_XGXS0_LINK_STATUS \
+#define NIG_STATUS_XGXS0_LINK_STATUS \
NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS
-#define NIG_XGXS0_LINK_STATUS_SIZE \
+#define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \
NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE
-#define NIG_SERDES0_LINK_STATUS \
+#define NIG_STATUS_SERDES0_LINK_STATUS \
NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS
#define NIG_MASK_MI_INT \
NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT
diff --git a/drivers/net/bnx2x_fw_defs.h b/drivers/net/bnx2x_fw_defs.h
index 62a6eb8..3b96890 100644
--- a/drivers/net/bnx2x_fw_defs.h
+++ b/drivers/net/bnx2x_fw_defs.h
@@ -1,6 +1,6 @@
/* bnx2x_fw_defs.h: Broadcom Everest network driver.
*
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h
index 6fd959c..b21075c 100644
--- a/drivers/net/bnx2x_hsi.h
+++ b/drivers/net/bnx2x_hsi.h
@@ -1,6 +1,6 @@
/* bnx2x_hsi.h: Broadcom Everest network driver.
*
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -8,169 +8,9 @@
*/
-#define FUNC_0 0
-#define FUNC_1 1
-#define FUNC_MAX 2
-
-
-/* This value (in milliseconds) determines the frequency of the driver
- * issuing the PULSE message code. The firmware monitors this periodic
- * pulse to determine when to switch to an OS-absent mode. */
-#define DRV_PULSE_PERIOD_MS 250
-
-/* This value (in milliseconds) determines how long the driver should
- * wait for an acknowledgement from the firmware before timing out. Once
- * the firmware has timed out, the driver will assume there is no firmware
- * running and there won't be any firmware-driver synchronization during a
- * driver reset. */
-#define FW_ACK_TIME_OUT_MS 5000
-
-#define FW_ACK_POLL_TIME_MS 1
-
-#define FW_ACK_NUM_OF_POLL (FW_ACK_TIME_OUT_MS/FW_ACK_POLL_TIME_MS)
-
-/* LED Blink rate that will achieve ~15.9Hz */
-#define LED_BLINK_RATE_VAL 480
-
-/****************************************************************************
- * Driver <-> FW Mailbox *
- ****************************************************************************/
-struct drv_fw_mb {
- u32 drv_mb_header;
-#define DRV_MSG_CODE_MASK 0xffff0000
-#define DRV_MSG_CODE_LOAD_REQ 0x10000000
-#define DRV_MSG_CODE_LOAD_DONE 0x11000000
-#define DRV_MSG_CODE_UNLOAD_REQ_WOL_EN 0x20000000
-#define DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS 0x20010000
-#define DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP 0x20020000
-#define DRV_MSG_CODE_UNLOAD_DONE 0x21000000
-#define DRV_MSG_CODE_DIAG_ENTER_REQ 0x50000000
-#define DRV_MSG_CODE_DIAG_EXIT_REQ 0x60000000
-#define DRV_MSG_CODE_VALIDATE_KEY 0x70000000
-#define DRV_MSG_CODE_GET_CURR_KEY 0x80000000
-#define DRV_MSG_CODE_GET_UPGRADE_KEY 0x81000000
-#define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000
-#define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000
-
-#define DRV_MSG_SEQ_NUMBER_MASK 0x0000ffff
-
- u32 drv_mb_param;
-
- u32 fw_mb_header;
-#define FW_MSG_CODE_MASK 0xffff0000
-#define FW_MSG_CODE_DRV_LOAD_COMMON 0x11000000
-#define FW_MSG_CODE_DRV_LOAD_PORT 0x12000000
-#define FW_MSG_CODE_DRV_LOAD_REFUSED 0x13000000
-#define FW_MSG_CODE_DRV_LOAD_DONE 0x14000000
-#define FW_MSG_CODE_DRV_UNLOAD_COMMON 0x21000000
-#define FW_MSG_CODE_DRV_UNLOAD_PORT 0x22000000
-#define FW_MSG_CODE_DRV_UNLOAD_DONE 0x23000000
-#define FW_MSG_CODE_DIAG_ENTER_DONE 0x50000000
-#define FW_MSG_CODE_DIAG_REFUSE 0x51000000
-#define FW_MSG_CODE_VALIDATE_KEY_SUCCESS 0x70000000
-#define FW_MSG_CODE_VALIDATE_KEY_FAILURE 0x71000000
-#define FW_MSG_CODE_GET_KEY_DONE 0x80000000
-#define FW_MSG_CODE_NO_KEY 0x8f000000
-#define FW_MSG_CODE_LIC_INFO_NOT_READY 0x8f800000
-#define FW_MSG_CODE_L2B_PRAM_LOADED 0x90000000
-#define FW_MSG_CODE_L2B_PRAM_T_LOAD_FAILURE 0x91000000
-#define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE 0x92000000
-#define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE 0x93000000
-#define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE 0x94000000
-
-#define FW_MSG_SEQ_NUMBER_MASK 0x0000ffff
-
- u32 fw_mb_param;
-
- u32 link_status;
- /* Driver should update this field on any link change event */
-
-#define LINK_STATUS_LINK_FLAG_MASK 0x00000001
-#define LINK_STATUS_LINK_UP 0x00000001
-#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001E
-#define LINK_STATUS_SPEED_AND_DUPLEX_AN_NOT_COMPLETE (0<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_10THD (1<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_10TFD (2<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_100TXHD (3<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_100T4 (4<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_100TXFD (5<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (6<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (7<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_1000XFD (7<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_2500THD (8<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_2500TFD (9<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_2500XFD (9<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_10GTFD (10<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_10GXFD (10<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_12GTFD (11<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_12GXFD (11<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD (12<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD (12<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_13GTFD (13<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_13GXFD (13<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_15GTFD (14<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_15GXFD (14<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_16GTFD (15<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_16GXFD (15<<1)
-
-#define LINK_STATUS_AUTO_NEGOTIATE_FLAG_MASK 0x00000020
-#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020
-
-#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040
-#define LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK 0x00000080
-#define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080
-
-#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE 0x00000200
-#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE 0x00000400
-#define LINK_STATUS_LINK_PARTNER_100T4_CAPABLE 0x00000800
-#define LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE 0x00001000
-#define LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE 0x00002000
-#define LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE 0x00004000
-#define LINK_STATUS_LINK_PARTNER_10THD_CAPABLE 0x00008000
-
-#define LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK 0x00010000
-#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00010000
-
-#define LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK 0x00020000
-#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00020000
-
-#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK 0x000C0000
-#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0<<18)
-#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1<<18)
-#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2<<18)
-#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3<<18)
-
-#define LINK_STATUS_SERDES_LINK 0x00100000
-
-#define LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE 0x00200000
-#define LINK_STATUS_LINK_PARTNER_2500XHD_CAPABLE 0x00400000
-#define LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE 0x00800000
-#define LINK_STATUS_LINK_PARTNER_12GXFD_CAPABLE 0x01000000
-#define LINK_STATUS_LINK_PARTNER_12_5GXFD_CAPABLE 0x02000000
-#define LINK_STATUS_LINK_PARTNER_13GXFD_CAPABLE 0x04000000
-#define LINK_STATUS_LINK_PARTNER_15GXFD_CAPABLE 0x08000000
-#define LINK_STATUS_LINK_PARTNER_16GXFD_CAPABLE 0x10000000
-
- u32 drv_pulse_mb;
-#define DRV_PULSE_SEQ_MASK 0x00007fff
-#define DRV_PULSE_SYSTEM_TIME_MASK 0xffff0000
- /* The system time is in the format of
- * (year-2001)*12*32 + month*32 + day. */
-#define DRV_PULSE_ALWAYS_ALIVE 0x00008000
- /* Indicate to the firmware not to go into the
- * OS-absent when it is not getting driver pulse.
- * This is used for debugging as well for PXE(MBA). */
-
- u32 mcp_pulse_mb;
-#define MCP_PULSE_SEQ_MASK 0x00007fff
-#define MCP_PULSE_ALWAYS_ALIVE 0x00008000
- /* Indicates to the driver not to assert due to lack
- * of MCP response */
-#define MCP_EVENT_MASK 0xffff0000
-#define MCP_EVENT_OTHER_DRIVER_RESET_REQ 0x00010000
-
-};
-
+#define PORT_0 0
+#define PORT_1 1
+#define PORT_MAX 2
/****************************************************************************
* Shared HW configuration *
@@ -249,7 +89,7 @@
#define SHARED_HW_CFG_SMBUS_TIMING_100KHZ 0x00000000
#define SHARED_HW_CFG_SMBUS_TIMING_400KHZ 0x00001000
-#define SHARED_HW_CFG_HIDE_FUNC1 0x00002000
+#define SHARED_HW_CFG_HIDE_PORT1 0x00002000
u32 power_dissipated; /* 0x11c */
#define SHARED_HW_CFG_POWER_DIS_CMN_MASK 0xff000000
@@ -290,6 +130,8 @@
#define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1015G 0x00000006
#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1020G 0x00000007
#define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G 0x00000008
+#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G 0x00000009
+#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G 0x0000000a
#define SHARED_HW_CFG_BOARD_VER_MASK 0xffff0000
#define SHARED_HW_CFG_BOARD_VER_SHIFT 16
@@ -304,13 +146,12 @@
};
+
/****************************************************************************
* Port HW configuration *
****************************************************************************/
-struct port_hw_cfg { /* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */
+struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */
- /* Fields below are port specific (in anticipation of dual port
- devices */
u32 pci_id;
#define PORT_HW_CFG_PCI_VENDOR_ID_MASK 0xffff0000
#define PORT_HW_CFG_PCI_DEVICE_ID_MASK 0x0000ffff
@@ -420,6 +261,8 @@
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706 0x00000500
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8276 0x00000600
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481 0x00000700
+#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101 0x00000800
+#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE 0x0000fd00
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN 0x0000ff00
#define PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK 0x000000ff
@@ -462,11 +305,13 @@
};
+
/****************************************************************************
* Shared Feature configuration *
****************************************************************************/
struct shared_feat_cfg { /* NVRAM Offset */
- u32 bmc_common; /* 0x450 */
+
+ u32 config; /* 0x450 */
#define SHARED_FEATURE_BMC_ECHO_MODE_EN 0x00000001
};
@@ -475,7 +320,8 @@
/****************************************************************************
* Port Feature configuration *
****************************************************************************/
-struct port_feat_cfg { /* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */
+struct port_feat_cfg { /* port 0: 0x454 port 1: 0x4c8 */
+
u32 config;
#define PORT_FEATURE_BAR1_SIZE_MASK 0x0000000f
#define PORT_FEATURE_BAR1_SIZE_SHIFT 0
@@ -609,8 +455,7 @@
#define PORT_FEATURE_SMBUS_ADDR_MASK 0x000000fe
#define PORT_FEATURE_SMBUS_ADDR_SHIFT 1
- u32 iscsib_boot_cfg;
-#define PORT_FEATURE_ISCSIB_SKIP_TARGET_BOOT 0x00000001
+ u32 reserved1;
u32 link_config; /* Used as HW defaults for the driver */
#define PORT_FEATURE_CONNECTED_SWITCH_MASK 0x03000000
@@ -657,20 +502,201 @@
};
+/*****************************************************************************
+ * Device Information *
+ *****************************************************************************/
+struct dev_info { /* size */
+
+ u32 bc_rev; /* 8 bits each: major, minor, build */ /* 4 */
+
+ struct shared_hw_cfg shared_hw_config; /* 40 */
+
+ struct port_hw_cfg port_hw_config[PORT_MAX]; /* 400*2=800 */
+
+ struct shared_feat_cfg shared_feature_config; /* 4 */
+
+ struct port_feat_cfg port_feature_config[PORT_MAX]; /* 116*2=232 */
+
+};
+
+
+#define FUNC_0 0
+#define FUNC_1 1
+#define E1_FUNC_MAX 2
+#define FUNC_MAX E1_FUNC_MAX
+
+
+/* This value (in milliseconds) determines the frequency of the driver
+ * issuing the PULSE message code. The firmware monitors this periodic
+ * pulse to determine when to switch to an OS-absent mode. */
+#define DRV_PULSE_PERIOD_MS 250
+
+/* This value (in milliseconds) determines how long the driver should
+ * wait for an acknowledgement from the firmware before timing out. Once
+ * the firmware has timed out, the driver will assume there is no firmware
+ * running and there won't be any firmware-driver synchronization during a
+ * driver reset. */
+#define FW_ACK_TIME_OUT_MS 5000
+
+#define FW_ACK_POLL_TIME_MS 1
+
+#define FW_ACK_NUM_OF_POLL (FW_ACK_TIME_OUT_MS/FW_ACK_POLL_TIME_MS)
+
+/* LED Blink rate that will achieve ~15.9Hz */
+#define LED_BLINK_RATE_VAL 480
+
/****************************************************************************
- * Device Information *
+ * Driver <-> FW Mailbox *
****************************************************************************/
-struct dev_info { /* size */
+struct drv_port_mb {
- u32 bc_rev; /* 8 bits each: major, minor, build */ /* 4 */
+ u32 link_status;
+ /* Driver should update this field on any link change event */
- struct shared_hw_cfg shared_hw_config; /* 40 */
+#define LINK_STATUS_LINK_FLAG_MASK 0x00000001
+#define LINK_STATUS_LINK_UP 0x00000001
+#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001E
+#define LINK_STATUS_SPEED_AND_DUPLEX_AN_NOT_COMPLETE (0<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_10THD (1<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_10TFD (2<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_100TXHD (3<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_100T4 (4<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_100TXFD (5<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (6<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (7<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_1000XFD (7<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_2500THD (8<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_2500TFD (9<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_2500XFD (9<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_10GTFD (10<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_10GXFD (10<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_12GTFD (11<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_12GXFD (11<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD (12<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD (12<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_13GTFD (13<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_13GXFD (13<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_15GTFD (14<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_15GXFD (14<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_16GTFD (15<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_16GXFD (15<<1)
- struct port_hw_cfg port_hw_config[FUNC_MAX]; /* 400*2=800 */
+#define LINK_STATUS_AUTO_NEGOTIATE_FLAG_MASK 0x00000020
+#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020
- struct shared_feat_cfg shared_feature_config; /* 4 */
+#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040
+#define LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK 0x00000080
+#define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080
- struct port_feat_cfg port_feature_config[FUNC_MAX];/* 116*2=232 */
+#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE 0x00000200
+#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE 0x00000400
+#define LINK_STATUS_LINK_PARTNER_100T4_CAPABLE 0x00000800
+#define LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE 0x00001000
+#define LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE 0x00002000
+#define LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE 0x00004000
+#define LINK_STATUS_LINK_PARTNER_10THD_CAPABLE 0x00008000
+
+#define LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK 0x00010000
+#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00010000
+
+#define LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK 0x00020000
+#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00020000
+
+#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK 0x000C0000
+#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0<<18)
+#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1<<18)
+#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2<<18)
+#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3<<18)
+
+#define LINK_STATUS_SERDES_LINK 0x00100000
+
+#define LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE 0x00200000
+#define LINK_STATUS_LINK_PARTNER_2500XHD_CAPABLE 0x00400000
+#define LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE 0x00800000
+#define LINK_STATUS_LINK_PARTNER_12GXFD_CAPABLE 0x01000000
+#define LINK_STATUS_LINK_PARTNER_12_5GXFD_CAPABLE 0x02000000
+#define LINK_STATUS_LINK_PARTNER_13GXFD_CAPABLE 0x04000000
+#define LINK_STATUS_LINK_PARTNER_15GXFD_CAPABLE 0x08000000
+#define LINK_STATUS_LINK_PARTNER_16GXFD_CAPABLE 0x10000000
+
+ u32 reserved[3];
+
+};
+
+
+struct drv_func_mb {
+
+ u32 drv_mb_header;
+#define DRV_MSG_CODE_MASK 0xffff0000
+#define DRV_MSG_CODE_LOAD_REQ 0x10000000
+#define DRV_MSG_CODE_LOAD_DONE 0x11000000
+#define DRV_MSG_CODE_UNLOAD_REQ_WOL_EN 0x20000000
+#define DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS 0x20010000
+#define DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP 0x20020000
+#define DRV_MSG_CODE_UNLOAD_DONE 0x21000000
+#define DRV_MSG_CODE_DIAG_ENTER_REQ 0x50000000
+#define DRV_MSG_CODE_DIAG_EXIT_REQ 0x60000000
+#define DRV_MSG_CODE_VALIDATE_KEY 0x70000000
+#define DRV_MSG_CODE_GET_CURR_KEY 0x80000000
+#define DRV_MSG_CODE_GET_UPGRADE_KEY 0x81000000
+#define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000
+#define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000
+
+#define DRV_MSG_SEQ_NUMBER_MASK 0x0000ffff
+
+ u32 drv_mb_param;
+
+ u32 fw_mb_header;
+#define FW_MSG_CODE_MASK 0xffff0000
+#define FW_MSG_CODE_DRV_LOAD_COMMON 0x10100000
+#define FW_MSG_CODE_DRV_LOAD_PORT 0x10110000
+#define FW_MSG_CODE_DRV_LOAD_FUNCTION 0x10120000
+#define FW_MSG_CODE_DRV_LOAD_REFUSED 0x10200000
+#define FW_MSG_CODE_DRV_LOAD_DONE 0x11100000
+#define FW_MSG_CODE_DRV_UNLOAD_COMMON 0x20100000
+#define FW_MSG_CODE_DRV_UNLOAD_PORT 0x20110000
+#define FW_MSG_CODE_DRV_UNLOAD_FUNCTION 0x20120000
+#define FW_MSG_CODE_DRV_UNLOAD_DONE 0x21100000
+#define FW_MSG_CODE_DIAG_ENTER_DONE 0x50100000
+#define FW_MSG_CODE_DIAG_REFUSE 0x50200000
+#define FW_MSG_CODE_DIAG_EXIT_DONE 0x60100000
+#define FW_MSG_CODE_VALIDATE_KEY_SUCCESS 0x70100000
+#define FW_MSG_CODE_VALIDATE_KEY_FAILURE 0x70200000
+#define FW_MSG_CODE_GET_KEY_DONE 0x80100000
+#define FW_MSG_CODE_NO_KEY 0x80f00000
+#define FW_MSG_CODE_LIC_INFO_NOT_READY 0x80f80000
+#define FW_MSG_CODE_L2B_PRAM_LOADED 0x90100000
+#define FW_MSG_CODE_L2B_PRAM_T_LOAD_FAILURE 0x90210000
+#define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE 0x90220000
+#define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE 0x90230000
+#define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE 0x90240000
+
+#define FW_MSG_SEQ_NUMBER_MASK 0x0000ffff
+
+ u32 fw_mb_param;
+
+ u32 drv_pulse_mb;
+#define DRV_PULSE_SEQ_MASK 0x00007fff
+#define DRV_PULSE_SYSTEM_TIME_MASK 0xffff0000
+ /* The system time is in the format of
+ * (year-2001)*12*32 + month*32 + day. */
+#define DRV_PULSE_ALWAYS_ALIVE 0x00008000
+ /* Indicate to the firmware not to go into the
+ * OS-absent when it is not getting driver pulse.
+ * This is used for debugging as well for PXE(MBA). */
+
+ u32 mcp_pulse_mb;
+#define MCP_PULSE_SEQ_MASK 0x00007fff
+#define MCP_PULSE_ALWAYS_ALIVE 0x00008000
+ /* Indicates to the driver not to assert due to lack
+ * of MCP response */
+#define MCP_EVENT_MASK 0xffff0000
+#define MCP_EVENT_OTHER_DRIVER_RESET_REQ 0x00010000
+
+ u32 iscsi_boot_signature;
+ u32 iscsi_boot_block_offset;
+
+ u32 reserved[3];
};
@@ -678,9 +704,8 @@
/****************************************************************************
* Management firmware state *
****************************************************************************/
-/* Allocate 320 bytes for management firmware: still not known exactly
- * how much IMD needs. */
-#define MGMTFW_STATE_WORD_SIZE 80
+/* Allocate 440 bytes for management firmware */
+#define MGMTFW_STATE_WORD_SIZE 110
struct mgmtfw_state {
u32 opaque[MGMTFW_STATE_WORD_SIZE];
@@ -691,31 +716,40 @@
* Shared Memory Region *
****************************************************************************/
struct shmem_region { /* SharedMem Offset (size) */
- u32 validity_map[FUNC_MAX]; /* 0x0 (4 * 2 = 0x8) */
-#define SHR_MEM_VALIDITY_PCI_CFG 0x00000001
-#define SHR_MEM_VALIDITY_MB 0x00000002
-#define SHR_MEM_VALIDITY_DEV_INFO 0x00000004
+
+ u32 validity_map[PORT_MAX]; /* 0x0 (4*2 = 0x8) */
+#define SHR_MEM_FORMAT_REV_ID ('A'<<24)
+#define SHR_MEM_FORMAT_REV_MASK 0xff000000
+ /* validity bits */
+#define SHR_MEM_VALIDITY_PCI_CFG 0x00100000
+#define SHR_MEM_VALIDITY_MB 0x00200000
+#define SHR_MEM_VALIDITY_DEV_INFO 0x00400000
+#define SHR_MEM_VALIDITY_RESERVED 0x00000007
/* One licensing bit should be set */
#define SHR_MEM_VALIDITY_LIC_KEY_IN_EFFECT_MASK 0x00000038
#define SHR_MEM_VALIDITY_LIC_MANUF_KEY_IN_EFFECT 0x00000008
#define SHR_MEM_VALIDITY_LIC_UPGRADE_KEY_IN_EFFECT 0x00000010
#define SHR_MEM_VALIDITY_LIC_NO_KEY_IN_EFFECT 0x00000020
+ /* Active MFW */
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_UNKNOWN 0x00000000
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_IPMI 0x00000040
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_UMP 0x00000080
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_NCSI 0x000000c0
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_NONE 0x000001c0
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_MASK 0x000001c0
- struct drv_fw_mb drv_fw_mb[FUNC_MAX]; /* 0x8 (28 * 2 = 0x38) */
+ struct dev_info dev_info; /* 0x8 (0x438) */
- struct dev_info dev_info; /* 0x40 (0x438) */
-
-#ifdef _LICENSE_H
- license_key_t drv_lic_key[FUNC_MAX]; /* 0x478 (52 * 2 = 0x68) */
-#else /* Linux! */
- u8 reserved[52*FUNC_MAX];
-#endif
+ u8 reserved[52*PORT_MAX];
/* FW information (for internal FW use) */
- u32 fw_info_fio_offset; /* 0x4e0 (0x4) */
- struct mgmtfw_state mgmtfw_state; /* 0x4e4 (0x140) */
+ u32 fw_info_fio_offset; /* 0x4a8 (0x4) */
+ struct mgmtfw_state mgmtfw_state; /* 0x4ac (0x1b8) */
-}; /* 0x624 */
+ struct drv_port_mb port_mb[PORT_MAX]; /* 0x664 (16*2=0x20) */
+ struct drv_func_mb func_mb[FUNC_MAX]; /* 0x684 (44*2=0x58) */
+
+}; /* 0x6dc */
#define BCM_5710_FW_MAJOR_VERSION 4
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index 04f93bf..dcaecc5 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -1,6 +1,6 @@
/* bnx2x_init.h: Broadcom Everest network driver.
*
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -409,7 +409,7 @@
pci_read_config_word(bp->pdev,
bp->pcie_cap + PCI_EXP_DEVCTL, (u16 *)&val);
- DP(NETIF_MSG_HW, "read 0x%x from devctl\n", val);
+ DP(NETIF_MSG_HW, "read 0x%x from devctl\n", (u16)val);
w_order = ((val & PCI_EXP_DEVCTL_PAYLOAD) >> 5);
r_order = ((val & PCI_EXP_DEVCTL_READRQ) >> 12);
@@ -472,10 +472,14 @@
REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val);
REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order);
- REG_WR(bp, PXP2_REG_RQ_WR_MBS0 + 8, w_order);
+ REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order);
REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order);
- REG_WR(bp, PXP2_REG_RQ_RD_MBS0 + 8, r_order);
+ REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order);
+ if (r_order == MAX_RD_ORD)
+ REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00);
+
+ REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order));
REG_WR(bp, PXP2_REG_WR_DMAE_TH, (128 << w_order)/16);
}
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index 86055297..5a1aa0b 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -1,6 +1,6 @@
/* bnx2x_reg.h: Broadcom Everest network driver.
*
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -24,6 +24,8 @@
#define BRB1_REG_BRB1_INT_STS 0x6011c
/* [RW 4] Parity mask register #0 read/write */
#define BRB1_REG_BRB1_PRTY_MASK 0x60138
+/* [R 4] Parity register #0 read */
+#define BRB1_REG_BRB1_PRTY_STS 0x6012c
/* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At
address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address
BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. */
@@ -281,6 +283,8 @@
#define CDU_REG_CDU_INT_STS 0x101030
/* [RW 5] Parity mask register #0 read/write */
#define CDU_REG_CDU_PRTY_MASK 0x10104c
+/* [R 5] Parity register #0 read */
+#define CDU_REG_CDU_PRTY_STS 0x101040
/* [RC 32] logging of error data in case of a CDU load error:
{expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
ype_error; ctual_active; ctual_compressed_context}; */
@@ -308,6 +312,8 @@
#define CFC_REG_CFC_INT_STS_CLR 0x104100
/* [RW 4] Parity mask register #0 read/write */
#define CFC_REG_CFC_PRTY_MASK 0x104118
+/* [R 4] Parity register #0 read */
+#define CFC_REG_CFC_PRTY_STS 0x10410c
/* [RW 21] CID cam access (21:1 - Data; alid - 0) */
#define CFC_REG_CID_CAM 0x104800
#define CFC_REG_CONTROL0 0x104028
@@ -354,6 +360,8 @@
#define CSDM_REG_CSDM_INT_MASK_1 0xc22ac
/* [RW 11] Parity mask register #0 read/write */
#define CSDM_REG_CSDM_PRTY_MASK 0xc22bc
+/* [R 11] Parity register #0 read */
+#define CSDM_REG_CSDM_PRTY_STS 0xc22b0
#define CSDM_REG_ENABLE_IN1 0xc2238
#define CSDM_REG_ENABLE_IN2 0xc223c
#define CSDM_REG_ENABLE_OUT1 0xc2240
@@ -438,6 +446,9 @@
/* [RW 32] Parity mask register #0 read/write */
#define CSEM_REG_CSEM_PRTY_MASK_0 0x200130
#define CSEM_REG_CSEM_PRTY_MASK_1 0x200140
+/* [R 32] Parity register #0 read */
+#define CSEM_REG_CSEM_PRTY_STS_0 0x200124
+#define CSEM_REG_CSEM_PRTY_STS_1 0x200134
#define CSEM_REG_ENABLE_IN 0x2000a4
#define CSEM_REG_ENABLE_OUT 0x2000a8
/* [RW 32] This address space contains all registers and memories that are
@@ -526,6 +537,8 @@
#define CSEM_REG_TS_9_AS 0x20005c
/* [RW 1] Parity mask register #0 read/write */
#define DBG_REG_DBG_PRTY_MASK 0xc0a8
+/* [R 1] Parity register #0 read */
+#define DBG_REG_DBG_PRTY_STS 0xc09c
/* [RW 2] debug only: These bits indicate the credit for PCI request type 4
interface; MUST be configured AFTER pci_ext_buffer_strt_addr_lsb/msb are
configured */
@@ -543,6 +556,8 @@
#define DMAE_REG_DMAE_INT_MASK 0x102054
/* [RW 4] Parity mask register #0 read/write */
#define DMAE_REG_DMAE_PRTY_MASK 0x102064
+/* [R 4] Parity register #0 read */
+#define DMAE_REG_DMAE_PRTY_STS 0x102058
/* [RW 1] Command 0 go. */
#define DMAE_REG_GO_C0 0x102080
/* [RW 1] Command 1 go. */
@@ -623,6 +638,8 @@
#define DORQ_REG_DORQ_INT_STS_CLR 0x170178
/* [RW 2] Parity mask register #0 read/write */
#define DORQ_REG_DORQ_PRTY_MASK 0x170190
+/* [R 2] Parity register #0 read */
+#define DORQ_REG_DORQ_PRTY_STS 0x170184
/* [RW 8] The address to write the DPM CID to STORM. */
#define DORQ_REG_DPM_CID_ADDR 0x170044
/* [RW 5] The DPM mode CID extraction offset. */
@@ -692,6 +709,8 @@
#define HC_REG_CONFIG_1 0x108004
/* [RW 3] Parity mask register #0 read/write */
#define HC_REG_HC_PRTY_MASK 0x1080a0
+/* [R 3] Parity register #0 read */
+#define HC_REG_HC_PRTY_STS 0x108094
/* [RW 17] status block interrupt mask; one in each bit means unmask; zerow
in each bit means mask; bit 0 - default SB; bit 1 - SB_0; bit 2 - SB_1...
bit 16- SB_15; addr 0 - port 0; addr 1 - port 1 */
@@ -1127,6 +1146,7 @@
#define MISC_REG_AEU_GENERAL_ATTN_17 0xa044
#define MISC_REG_AEU_GENERAL_ATTN_18 0xa048
#define MISC_REG_AEU_GENERAL_ATTN_19 0xa04c
+#define MISC_REG_AEU_GENERAL_ATTN_10 0xa028
#define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c
#define MISC_REG_AEU_GENERAL_ATTN_2 0xa008
#define MISC_REG_AEU_GENERAL_ATTN_20 0xa050
@@ -1135,6 +1155,9 @@
#define MISC_REG_AEU_GENERAL_ATTN_4 0xa010
#define MISC_REG_AEU_GENERAL_ATTN_5 0xa014
#define MISC_REG_AEU_GENERAL_ATTN_6 0xa018
+#define MISC_REG_AEU_GENERAL_ATTN_7 0xa01c
+#define MISC_REG_AEU_GENERAL_ATTN_8 0xa020
+#define MISC_REG_AEU_GENERAL_ATTN_9 0xa024
/* [RW 32] first 32b for inverting the input for function 0; for each bit:
0= do not invert; 1= invert; mapped as follows: [0] NIG attention for
function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp;
@@ -1183,6 +1206,40 @@
starts at 0x0 for the A0 tape-out and increments by one for each
all-layer tape-out. */
#define MISC_REG_CHIP_REV 0xa40c
+/* [RW 32] The following driver registers(1..6) represent 6 drivers and 32
+ clients. Each client can be controlled by one driver only. One in each
+ bit represent that this driver control the appropriate client (Ex: bit 5
+ is set means this driver control client number 5). addr1 = set; addr0 =
+ clear; read from both addresses will give the same result = status. write
+ to address 1 will set a request to control all the clients that their
+ appropriate bit (in the write command) is set. if the client is free (the
+ appropriate bit in all the other drivers is clear) one will be written to
+ that driver register; if the client isn't free the bit will remain zero.
+ if the appropriate bit is set (the driver request to gain control on a
+ client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
+ interrupt will be asserted). write to address 0 will set a request to
+ free all the clients that their appropriate bit (in the write command) is
+ set. if the appropriate bit is clear (the driver request to free a client
+ it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
+ be asserted). */
+#define MISC_REG_DRIVER_CONTROL_1 0xa510
+/* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of
+ these bits is written as a '1'; the corresponding SPIO bit will turn off
+ it's drivers and become an input. This is the reset state of all GPIO
+ pins. The read value of these bits will be a '1' if that last command
+ (#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff).
+ [23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written
+ as a '1'; the corresponding GPIO bit will drive low. The read value of
+ these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for
+ this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0;
+ SET When any of these bits is written as a '1'; the corresponding GPIO
+ bit will drive high (if it has that capability). The read value of these
+ bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this
+ bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0;
+ RO; These bits indicate the read value of each of the eight GPIO pins.
+ This is the result value of the pin; not the drive value. Writing these
+ bits will have not effect. */
+#define MISC_REG_GPIO 0xa490
/* [RW 1] Setting this bit enables a timer in the GRC block to timeout any
access that does not finish within
~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is
@@ -1223,6 +1280,8 @@
#define MISC_REG_MISC_INT_MASK 0xa388
/* [RW 1] Parity mask register #0 read/write */
#define MISC_REG_MISC_PRTY_MASK 0xa398
+/* [R 1] Parity register #0 read */
+#define MISC_REG_MISC_PRTY_STS 0xa38c
/* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911.
inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1
divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1
@@ -1264,6 +1323,55 @@
/* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is
shared with the driver resides */
#define MISC_REG_SHARED_MEM_ADDR 0xa2b4
+/* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1';
+ the corresponding SPIO bit will turn off it's drivers and become an
+ input. This is the reset state of all SPIO pins. The read value of these
+ bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this
+ bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits
+ is written as a '1'; the corresponding SPIO bit will drive low. The read
+ value of these bits will be a '1' if that last command (#SET; #CLR; or
+#FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of
+ these bits is written as a '1'; the corresponding SPIO bit will drive
+ high (if it has that capability). The read value of these bits will be a
+ '1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET.
+ (reset value 0). [7-0] VALUE RO; These bits indicate the read value of
+ each of the eight SPIO pins. This is the result value of the pin; not the
+ drive value. Writing these bits will have not effect. Each 8 bits field
+ is divided as follows: [0] VAUX Enable; when pulsed low; enables supply
+ from VAUX. (This is an output pin only; the FLOAT field is not applicable
+ for this pin); [1] VAUX Disable; when pulsed low; disables supply form
+ VAUX. (This is an output pin only; FLOAT field is not applicable for this
+ pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to
+ select VAUX supply. (This is an output pin only; it is not controlled by
+ the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT
+ field is not applicable for this pin; only the VALUE fields is relevant -
+ it reflects the output value); [3] reserved; [4] spio_4; [5] spio_5; [6]
+ Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP
+ device ID select; read by UMP firmware. */
+#define MISC_REG_SPIO 0xa4fc
+/* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC.
+ according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5;
+ [7:0] reserved */
+#define MISC_REG_SPIO_EVENT_EN 0xa2b8
+/* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears the
+ corresponding bit in the #OLD_VALUE register. This will acknowledge an
+ interrupt on the falling edge of corresponding SPIO input (reset value
+ 0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit
+ in the #OLD_VALUE register. This will acknowledge an interrupt on the
+ rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE
+ RO; These bits indicate the old value of the SPIO input value. When the
+ ~INT_STATE bit is set; this bit indicates the OLD value of the pin such
+ that if ~INT_STATE is set and this bit is '0'; then the interrupt is due
+ to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the
+ interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE
+ RO; These bits indicate the current SPIO interrupt state for each SPIO
+ pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR
+ command bit is written. This bit is set when the SPIO input does not
+ match the current value in #OLD_VALUE (reset value 0). */
+#define MISC_REG_SPIO_INT 0xa500
+/* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
+ loaded; 0-prepare; -unprepare */
+#define MISC_REG_UNPREPARED 0xa424
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15)
@@ -1392,6 +1500,9 @@
#define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044
/* [RW 1] Input enable for RX PBF LP IF */
#define NIG_REG_PBF_LB_IN_EN 0x100b4
+/* [RW 1] Value of this register will be transmitted to port swap when
+ ~nig_registers_strap_override.strap_override =1 */
+#define NIG_REG_PORT_SWAP 0x10394
/* [RW 1] output enable for RX parser descriptor IF */
#define NIG_REG_PRS_EOP_OUT_EN 0x10104
/* [RW 1] Input enable for RX parser request IF */
@@ -1410,6 +1521,10 @@
#define NIG_REG_STAT2_BRB_OCTET 0x107e0
#define NIG_REG_STATUS_INTERRUPT_PORT0 0x10328
#define NIG_REG_STATUS_INTERRUPT_PORT1 0x1032c
+/* [RW 1] port swap mux selection. If this register equal to 0 then port
+ swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then
+ ort swap is equal to ~nig_registers_port_swap.port_swap */
+#define NIG_REG_STRAP_OVERRIDE 0x10398
/* [RW 1] output enable for RX_XCM0 IF */
#define NIG_REG_XCM0_OUT_EN 0x100f0
/* [RW 1] output enable for RX_XCM1 IF */
@@ -1499,6 +1614,8 @@
#define PB_REG_PB_INT_STS 0x1c
/* [RW 4] Parity mask register #0 read/write */
#define PB_REG_PB_PRTY_MASK 0x38
+/* [R 4] Parity register #0 read */
+#define PB_REG_PB_PRTY_STS 0x2c
#define PRS_REG_A_PRSU_20 0x40134
/* [R 8] debug only: CFC load request current credit. Transaction based. */
#define PRS_REG_CFC_LD_CURRENT_CREDIT 0x40164
@@ -1590,6 +1707,8 @@
#define PRS_REG_PRS_INT_STS 0x40188
/* [RW 8] Parity mask register #0 read/write */
#define PRS_REG_PRS_PRTY_MASK 0x401a4
+/* [R 8] Parity register #0 read */
+#define PRS_REG_PRS_PRTY_STS 0x40198
/* [RW 8] Context region for pure acknowledge packets. Used in CFC load
request message */
#define PRS_REG_PURE_REGIONS 0x40024
@@ -1718,6 +1837,9 @@
/* [RW 32] Parity mask register #0 read/write */
#define PXP2_REG_PXP2_PRTY_MASK_0 0x120588
#define PXP2_REG_PXP2_PRTY_MASK_1 0x120598
+/* [R 32] Parity register #0 read */
+#define PXP2_REG_PXP2_PRTY_STS_0 0x12057c
+#define PXP2_REG_PXP2_PRTY_STS_1 0x12058c
/* [R 1] Debug only: The 'almost full' indication from each fifo (gives
indication about backpressure) */
#define PXP2_REG_RD_ALMOST_FULL_0 0x120424
@@ -1911,6 +2033,8 @@
#define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8
/* [WB 53] Onchip address table */
#define PXP2_REG_RQ_ONCHIP_AT 0x122000
+/* [RW 13] Pending read limiter threshold; in Dwords */
+#define PXP2_REG_RQ_PDR_LIMIT 0x12033c
/* [RW 2] Endian mode for qm */
#define PXP2_REG_RQ_QM_ENDIAN_M 0x120194
/* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
@@ -1921,6 +2045,9 @@
/* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
#define PXP2_REG_RQ_RD_MBS0 0x120160
+/* [RW 3] Max burst size filed for read requests port 1; 000 - 128B;
+ 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
+#define PXP2_REG_RQ_RD_MBS1 0x120168
/* [RW 2] Endian mode for src */
#define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c
/* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k;
@@ -2000,10 +2127,17 @@
/* [RW 3] Max burst size filed for write requests port 0; 000 - 128B;
001:256B; 010: 512B; */
#define PXP2_REG_RQ_WR_MBS0 0x12015c
+/* [RW 3] Max burst size filed for write requests port 1; 000 - 128B;
+ 001:256B; 010: 512B; */
+#define PXP2_REG_RQ_WR_MBS1 0x120164
/* [RW 10] if Number of entries in dmae fifo will be higer than this
threshold then has_payload indication will be asserted; the default value
should be equal to > write MBS size! */
#define PXP2_REG_WR_DMAE_TH 0x120368
+/* [RW 10] if Number of entries in usdmdp fifo will be higer than this
+ threshold then has_payload indication will be asserted; the default value
+ should be equal to > write MBS size! */
+#define PXP2_REG_WR_USDMDP_TH 0x120348
/* [R 1] debug only: Indication if PSWHST arbiter is idle */
#define PXP_REG_HST_ARB_IS_IDLE 0x103004
/* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means
@@ -2021,6 +2155,8 @@
#define PXP_REG_PXP_INT_STS_CLR_0 0x10306c
/* [RW 26] Parity mask register #0 read/write */
#define PXP_REG_PXP_PRTY_MASK 0x103094
+/* [R 26] Parity register #0 read */
+#define PXP_REG_PXP_PRTY_STS 0x103088
/* [RW 4] The activity counter initial increment value sent in the load
request */
#define QM_REG_ACTCTRINITVAL_0 0x168040
@@ -2127,6 +2263,8 @@
#define QM_REG_QM_INT_STS 0x168438
/* [RW 9] Parity mask register #0 read/write */
#define QM_REG_QM_PRTY_MASK 0x168454
+/* [R 9] Parity register #0 read */
+#define QM_REG_QM_PRTY_STS 0x168448
/* [R 32] Current queues in pipeline: Queues from 32 to 63 */
#define QM_REG_QSTATUS_HIGH 0x16802c
/* [R 32] Current queues in pipeline: Queues from 0 to 31 */
@@ -2410,6 +2548,8 @@
#define SRC_REG_SRC_INT_STS 0x404ac
/* [RW 3] Parity mask register #0 read/write */
#define SRC_REG_SRC_PRTY_MASK 0x404c8
+/* [R 3] Parity register #0 read */
+#define SRC_REG_SRC_PRTY_STS 0x404bc
/* [R 4] Used to read the value of the XX protection CAM occupancy counter. */
#define TCM_REG_CAM_OCCUP 0x5017c
/* [RW 1] CDU AG read Interface enable. If 0 - the request input is
@@ -2730,6 +2870,8 @@
#define TSDM_REG_TSDM_INT_MASK_1 0x422ac
/* [RW 11] Parity mask register #0 read/write */
#define TSDM_REG_TSDM_PRTY_MASK 0x422bc
+/* [R 11] Parity register #0 read */
+#define TSDM_REG_TSDM_PRTY_STS 0x422b0
/* [RW 5] The number of time_slots in the arbitration cycle */
#define TSEM_REG_ARB_CYCLE_SIZE 0x180034
/* [RW 3] The source that is associated with arbitration element 0. Source
@@ -2854,6 +2996,9 @@
/* [RW 32] Parity mask register #0 read/write */
#define TSEM_REG_TSEM_PRTY_MASK_0 0x180120
#define TSEM_REG_TSEM_PRTY_MASK_1 0x180130
+/* [R 32] Parity register #0 read */
+#define TSEM_REG_TSEM_PRTY_STS_0 0x180114
+#define TSEM_REG_TSEM_PRTY_STS_1 0x180124
/* [R 5] Used to read the XX protection CAM occupancy counter. */
#define UCM_REG_CAM_OCCUP 0xe0170
/* [RW 1] CDU AG read Interface enable. If 0 - the request input is
@@ -3155,6 +3300,8 @@
#define USDM_REG_USDM_INT_MASK_1 0xc42b0
/* [RW 11] Parity mask register #0 read/write */
#define USDM_REG_USDM_PRTY_MASK 0xc42c0
+/* [R 11] Parity register #0 read */
+#define USDM_REG_USDM_PRTY_STS 0xc42b4
/* [RW 5] The number of time_slots in the arbitration cycle */
#define USEM_REG_ARB_CYCLE_SIZE 0x300034
/* [RW 3] The source that is associated with arbitration element 0. Source
@@ -3279,6 +3426,9 @@
/* [RW 32] Parity mask register #0 read/write */
#define USEM_REG_USEM_PRTY_MASK_0 0x300130
#define USEM_REG_USEM_PRTY_MASK_1 0x300140
+/* [R 32] Parity register #0 read */
+#define USEM_REG_USEM_PRTY_STS_0 0x300124
+#define USEM_REG_USEM_PRTY_STS_1 0x300134
/* [RW 2] The queue index for registration on Aux1 counter flag. */
#define XCM_REG_AUX1_Q 0x20134
/* [RW 2] Per each decision rule the queue index to register to. */
@@ -3684,6 +3834,8 @@
#define XSDM_REG_XSDM_INT_MASK_1 0x1662ac
/* [RW 11] Parity mask register #0 read/write */
#define XSDM_REG_XSDM_PRTY_MASK 0x1662bc
+/* [R 11] Parity register #0 read */
+#define XSDM_REG_XSDM_PRTY_STS 0x1662b0
/* [RW 5] The number of time_slots in the arbitration cycle */
#define XSEM_REG_ARB_CYCLE_SIZE 0x280034
/* [RW 3] The source that is associated with arbitration element 0. Source
@@ -3808,6 +3960,9 @@
/* [RW 32] Parity mask register #0 read/write */
#define XSEM_REG_XSEM_PRTY_MASK_0 0x280130
#define XSEM_REG_XSEM_PRTY_MASK_1 0x280140
+/* [R 32] Parity register #0 read */
+#define XSEM_REG_XSEM_PRTY_STS_0 0x280124
+#define XSEM_REG_XSEM_PRTY_STS_1 0x280134
#define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0)
#define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1)
#define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0)
@@ -3847,6 +4002,8 @@
#define EMAC_MDIO_COMM_START_BUSY (1L<<29)
#define EMAC_MDIO_MODE_AUTO_POLL (1L<<4)
#define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31)
+#define EMAC_MDIO_MODE_CLOCK_CNT (0x3fL<<16)
+#define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16
#define EMAC_MODE_25G_MODE (1L<<5)
#define EMAC_MODE_ACPI_RCVD (1L<<20)
#define EMAC_MODE_HALF_DUPLEX (1L<<1)
@@ -3874,6 +4031,17 @@
#define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31)
#define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3)
#define EMAC_TX_MODE_RESET (1L<<0)
+#define MISC_REGISTERS_GPIO_1 1
+#define MISC_REGISTERS_GPIO_2 2
+#define MISC_REGISTERS_GPIO_3 3
+#define MISC_REGISTERS_GPIO_CLR_POS 16
+#define MISC_REGISTERS_GPIO_FLOAT (0xffL<<24)
+#define MISC_REGISTERS_GPIO_FLOAT_POS 24
+#define MISC_REGISTERS_GPIO_INPUT_HI_Z 2
+#define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1
+#define MISC_REGISTERS_GPIO_OUTPUT_LOW 0
+#define MISC_REGISTERS_GPIO_PORT_SHIFT 4
+#define MISC_REGISTERS_GPIO_SET_POS 8
#define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588
#define MISC_REGISTERS_RESET_REG_1_SET 0x584
#define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598
@@ -3891,6 +4059,25 @@
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW (0x1<<4)
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8)
#define MISC_REGISTERS_RESET_REG_3_SET 0x5a4
+#define MISC_REGISTERS_SPIO_4 4
+#define MISC_REGISTERS_SPIO_5 5
+#define MISC_REGISTERS_SPIO_7 7
+#define MISC_REGISTERS_SPIO_CLR_POS 16
+#define MISC_REGISTERS_SPIO_FLOAT (0xffL<<24)
+#define GRC_MISC_REGISTERS_SPIO_FLOAT7 0x80000000
+#define GRC_MISC_REGISTERS_SPIO_FLOAT6 0x40000000
+#define GRC_MISC_REGISTERS_SPIO_FLOAT5 0x20000000
+#define GRC_MISC_REGISTERS_SPIO_FLOAT4 0x10000000
+#define MISC_REGISTERS_SPIO_FLOAT_POS 24
+#define MISC_REGISTERS_SPIO_INPUT_HI_Z 2
+#define MISC_REGISTERS_SPIO_INT_OLD_SET_POS 16
+#define MISC_REGISTERS_SPIO_OUTPUT_HIGH 1
+#define MISC_REGISTERS_SPIO_OUTPUT_LOW 0
+#define MISC_REGISTERS_SPIO_SET_POS 8
+#define HW_LOCK_MAX_RESOURCE_VALUE 31
+#define HW_LOCK_RESOURCE_8072_MDIO 0
+#define HW_LOCK_RESOURCE_GPIO 1
+#define HW_LOCK_RESOURCE_SPIO 2
#define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (1<<18)
#define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (1<<31)
#define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (1<<9)
@@ -3918,6 +4105,7 @@
#define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT (1<<3)
#define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR (1<<2)
#define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR (1<<22)
+#define AEU_INPUTS_ATTN_BITS_SPIO5 (1<<15)
#define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT (1<<27)
#define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT (1<<5)
#define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT (1<<25)
@@ -4206,6 +4394,9 @@
#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000
#define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11
#define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000
+#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14
+#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001
+#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010
#define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15
#define MDIO_REG_BANK_GP_STATUS 0x8120
@@ -4362,11 +4553,13 @@
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001
+#define EXT_PHY_AUTO_NEG_DEVAD 0x7
#define EXT_PHY_OPT_PMA_PMD_DEVAD 0x1
#define EXT_PHY_OPT_WIS_DEVAD 0x2
#define EXT_PHY_OPT_PCS_DEVAD 0x3
#define EXT_PHY_OPT_PHY_XS_DEVAD 0x4
#define EXT_PHY_OPT_CNTL 0x0
+#define EXT_PHY_OPT_CNTL2 0x7
#define EXT_PHY_OPT_PMD_RX_SD 0xa
#define EXT_PHY_OPT_PMD_MISC_CNTL 0xca0a
#define EXT_PHY_OPT_PHY_IDENTIFIER 0xc800
@@ -4378,11 +4571,24 @@
#define EXT_PHY_OPT_LASI_STATUS 0x9005
#define EXT_PHY_OPT_PCS_STATUS 0x0020
#define EXT_PHY_OPT_XGXS_LANE_STATUS 0x0018
+#define EXT_PHY_OPT_AN_LINK_STATUS 0x8304
+#define EXT_PHY_OPT_AN_CL37_CL73 0x8370
+#define EXT_PHY_OPT_AN_CL37_FD 0xffe4
+#define EXT_PHY_OPT_AN_CL37_AN 0xffe0
+#define EXT_PHY_OPT_AN_ADV 0x11
#define EXT_PHY_KR_PMA_PMD_DEVAD 0x1
#define EXT_PHY_KR_PCS_DEVAD 0x3
#define EXT_PHY_KR_AUTO_NEG_DEVAD 0x7
#define EXT_PHY_KR_CTRL 0x0000
+#define EXT_PHY_KR_STATUS 0x0001
+#define EXT_PHY_KR_AUTO_NEG_COMPLETE 0x0020
+#define EXT_PHY_KR_AUTO_NEG_ADVERT 0x0010
+#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE 0x0400
+#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC 0x0800
+#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH 0x0C00
+#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK 0x0C00
+#define EXT_PHY_KR_LP_AUTO_NEG 0x0013
#define EXT_PHY_KR_CTRL2 0x0007
#define EXT_PHY_KR_PCS_STATUS 0x0020
#define EXT_PHY_KR_PMD_CTRL 0x0096
@@ -4391,4 +4597,8 @@
#define EXT_PHY_KR_MISC_CTRL1 0xca85
#define EXT_PHY_KR_GEN_CTRL 0xca10
#define EXT_PHY_KR_ROM_CODE 0xca19
+#define EXT_PHY_KR_ROM_RESET_INTERNAL_MP 0x0188
+#define EXT_PHY_KR_ROM_MICRO_RESET 0x018a
+
+#define EXT_PHY_SFX7101_XGXS_TEST1 0xc00a
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 57175097..348371f 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -172,30 +172,30 @@
them to system IRQ numbers. This mapping is card specific and is set to
the configuration of the Cirrus Eval board for this chip. */
#ifdef CONFIG_ARCH_CLPS7500
-static unsigned int netcard_portlist[] __initdata =
+static unsigned int netcard_portlist[] __used __initdata =
{ 0x80090303, 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
static unsigned int cs8900_irq_map[] = {12,0,0,0};
#elif defined(CONFIG_SH_HICOSH4)
-static unsigned int netcard_portlist[] __initdata =
+static unsigned int netcard_portlist[] __used __initdata =
{ 0x0300, 0};
static unsigned int cs8900_irq_map[] = {1,0,0,0};
#elif defined(CONFIG_MACH_IXDP2351)
-static unsigned int netcard_portlist[] __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
+static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
#include <asm/irq.h>
#elif defined(CONFIG_ARCH_IXDP2X01)
#include <asm/irq.h>
-static unsigned int netcard_portlist[] __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
+static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
#elif defined(CONFIG_ARCH_PNX010X)
#include <asm/irq.h>
#include <asm/arch/gpio.h>
#define CIRRUS_DEFAULT_BASE IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000) /* = Physical address 0x48200000 */
#define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
-static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0};
+static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0};
static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
#else
-static unsigned int netcard_portlist[] __initdata =
+static unsigned int netcard_portlist[] __used __initdata =
{ 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
static unsigned int cs8900_irq_map[] = {10,11,12,5};
#endif
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 3beace5..7fe2031 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -438,7 +438,7 @@
* For non-82573 silicon, write data to EEPROM at offset using SPI interface.
*
* If e1000e_update_nvm_checksum is not called after this function, the
- * EEPROM will most likley contain an invalid checksum.
+ * EEPROM will most likely contain an invalid checksum.
**/
static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words,
u16 *data)
@@ -547,7 +547,7 @@
* poll for completion.
*
* If e1000e_update_nvm_checksum is not called after this function, the
- * EEPROM will most likley contain an invalid checksum.
+ * EEPROM will most likely contain an invalid checksum.
**/
static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
u16 words, u16 *data)
@@ -1053,7 +1053,7 @@
/* If SerDes loopback mode is entered, there is no form
* of reset to take the adapter out of that mode. So we
* have to explicitly take the adapter out of loopback
- * mode. This prevents drivers from twidling their thumbs
+ * mode. This prevents drivers from twiddling their thumbs
* if another tool failed to take it out of loopback mode.
*/
ew32(SCTL,
@@ -1098,7 +1098,7 @@
* e1000e_get_laa_state_82571 - Get locally administered address state
* @hw: pointer to the HW structure
*
- * Retrieve and return the current locally administed address state.
+ * Retrieve and return the current locally administered address state.
**/
bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
{
@@ -1113,7 +1113,7 @@
* @hw: pointer to the HW structure
* @state: enable/disable locally administered address
*
- * Enable/Disable the current locally administed address state.
+ * Enable/Disable the current locally administers address state.
**/
void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state)
{
@@ -1281,16 +1281,6 @@
static struct e1000_nvm_operations e82571_nvm_ops = {
.acquire_nvm = e1000_acquire_nvm_82571,
- .read_nvm = e1000e_read_nvm_spi,
- .release_nvm = e1000_release_nvm_82571,
- .update_nvm = e1000_update_nvm_checksum_82571,
- .valid_led_default = e1000_valid_led_default_82571,
- .validate_nvm = e1000_validate_nvm_checksum_82571,
- .write_nvm = e1000_write_nvm_82571,
-};
-
-static struct e1000_nvm_operations e82573_nvm_ops = {
- .acquire_nvm = e1000_acquire_nvm_82571,
.read_nvm = e1000e_read_nvm_eerd,
.release_nvm = e1000_release_nvm_82571,
.update_nvm = e1000_update_nvm_checksum_82571,
@@ -1355,6 +1345,6 @@
.get_invariants = e1000_get_invariants_82571,
.mac_ops = &e82571_mac_ops,
.phy_ops = &e82_phy_ops_m88,
- .nvm_ops = &e82573_nvm_ops,
+ .nvm_ops = &e82571_nvm_ops,
};
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 6232c3e..a4f511f 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -66,7 +66,7 @@
#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
/* Extended Device Control */
-#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
+#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */
#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
@@ -75,12 +75,12 @@
#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
-/* Receive Decriptor bit definitions */
+/* Receive Descriptor bit definitions */
#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
-#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */
+#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
@@ -223,7 +223,7 @@
#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */
#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
-/* Constants used to intrepret the masked PCI-X bus speed. */
+/* Constants used to interpret the masked PCI-X bus speed. */
#define HALF_DUPLEX 1
#define FULL_DUPLEX 2
@@ -517,7 +517,7 @@
/* PHY 1000 MII Register/Bit Definitions */
/* PHY Registers defined by IEEE */
#define PHY_CONTROL 0x00 /* Control Register */
-#define PHY_STATUS 0x01 /* Status Regiser */
+#define PHY_STATUS 0x01 /* Status Register */
#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 8b88c22..327c062 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -42,8 +42,7 @@
struct e1000_info;
#define ndev_printk(level, netdev, format, arg...) \
- printk(level "%s: %s: " format, (netdev)->dev.parent->bus_id, \
- (netdev)->name, ## arg)
+ printk(level "%s: " format, (netdev)->name, ## arg)
#ifdef DEBUG
#define ndev_dbg(netdev, format, arg...) \
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 3c5862f..916025b 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -184,7 +184,7 @@
E1000_ICRXDMTC = 0x04120, /* Irq Cause Rx Desc MinThreshold Count */
E1000_ICRXOC = 0x04124, /* Irq Cause Receiver Overrun Count */
E1000_RXCSUM = 0x05000, /* RX Checksum Control - RW */
- E1000_RFCTL = 0x05008, /* Receive Filter Control*/
+ E1000_RFCTL = 0x05008, /* Receive Filter Control */
E1000_MTA = 0x05200, /* Multicast Table Array - RW Array */
E1000_RA = 0x05400, /* Receive Address - RW Array */
E1000_VFTA = 0x05600, /* VLAN Filter Table Array - RW Array */
@@ -202,7 +202,7 @@
E1000_FACTPS = 0x05B30, /* Function Active and Power State to MNG */
E1000_SWSM = 0x05B50, /* SW Semaphore */
E1000_FWSM = 0x05B54, /* FW Semaphore */
- E1000_HICR = 0x08F00, /* Host Inteface Control */
+ E1000_HICR = 0x08F00, /* Host Interface Control */
};
/* RSS registers */
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 8f8139d..0ae3955 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -671,7 +671,7 @@
* e1000_check_polarity_ife_ich8lan - Check cable polarity for IFE PHY
* @hw: pointer to the HW structure
*
- * Polarity is determined on the polarity reveral feature being enabled.
+ * Polarity is determined on the polarity reversal feature being enabled.
* This function is only called by other family-specific
* routines.
**/
@@ -947,7 +947,7 @@
/* Either we should have a hardware SPI cycle in progress
* bit to check against, in order to start a new cycle or
* FDONE bit should be changed in the hardware so that it
- * is 1 after harware reset, which can then be used as an
+ * is 1 after hardware reset, which can then be used as an
* indication whether a cycle is in progress or has been
* completed.
*/
@@ -1155,7 +1155,7 @@
* which writes the checksum to the shadow ram. The changes in the shadow
* ram are then committed to the EEPROM by processing each bank at a time
* checking for the modified bit and writing only the pending changes.
- * After a succesful commit, the shadow ram is cleared and is ready for
+ * After a successful commit, the shadow ram is cleared and is ready for
* future writes.
**/
static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
@@ -1680,7 +1680,7 @@
* - initialize LED identification
* - setup receive address registers
* - setup flow control
- * - setup transmit discriptors
+ * - setup transmit descriptors
* - clear statistics
**/
static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
@@ -1961,7 +1961,7 @@
E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
ew32(PHY_CTRL, phy_ctrl);
- /* Call gig speed drop workaround on Giga disable before accessing
+ /* Call gig speed drop workaround on Gig disable before accessing
* any PHY registers */
e1000e_gig_downshift_workaround_ich8lan(hw);
@@ -1972,7 +1972,7 @@
/**
* e1000_set_kmrn_lock_loss_workaound_ich8lan - Set Kumeran workaround state
* @hw: pointer to the HW structure
- * @state: boolean value used to set the current Kumaran workaround state
+ * @state: boolean value used to set the current Kumeran workaround state
*
* If ICH8, set the current Kumeran workaround state (enabled - TRUE
* /disabled - FALSE).
@@ -2017,7 +2017,7 @@
E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
ew32(PHY_CTRL, reg);
- /* Call gig speed drop workaround on Giga disable before
+ /* Call gig speed drop workaround on Gig disable before
* accessing any PHY registers */
if (hw->mac.type == e1000_ich8lan)
e1000e_gig_downshift_workaround_ich8lan(hw);
@@ -2045,7 +2045,7 @@
* @hw: pointer to the HW structure
*
* Steps to take when dropping from 1Gb/s (eg. link cable removal (LSC),
- * LPLU, Giga disable, MDIC PHY reset):
+ * LPLU, Gig disable, MDIC PHY reset):
* 1) Set Kumeran Near-end loopback
* 2) Clear Kumeran Near-end loopback
* Should only be called for ICH8[m] devices with IGP_3 Phy.
@@ -2089,10 +2089,10 @@
}
/**
- * e1000_led_on_ich8lan - Turn LED's on
+ * e1000_led_on_ich8lan - Turn LEDs on
* @hw: pointer to the HW structure
*
- * Turn on the LED's.
+ * Turn on the LEDs.
**/
static s32 e1000_led_on_ich8lan(struct e1000_hw *hw)
{
@@ -2105,10 +2105,10 @@
}
/**
- * e1000_led_off_ich8lan - Turn LED's off
+ * e1000_led_off_ich8lan - Turn LEDs off
* @hw: pointer to the HW structure
*
- * Turn off the LED's.
+ * Turn off the LEDs.
**/
static s32 e1000_led_off_ich8lan(struct e1000_hw *hw)
{
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 16f35fa..95f75a4 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -589,9 +589,6 @@
s32 ret_val;
u16 nvm_data;
- if (mac->fc != e1000_fc_default)
- return 0;
-
/* Read and store word 0x0F of the EEPROM. This word contains bits
* that determine the hardware's default PAUSE (flow control) mode,
* a bit that determines whether the HW defaults to enabling or
@@ -1107,34 +1104,13 @@
(mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
mac->fc = e1000_fc_rx_pause;
hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n");
- }
- /* Per the IEEE spec, at this point flow control should be
- * disabled. However, we want to consider that we could
- * be connected to a legacy switch that doesn't advertise
- * desired flow control, but can be forced on the link
- * partner. So if we advertised no flow control, that is
- * what we will resolve to. If we advertised some kind of
- * receive capability (Rx Pause Only or Full Flow Control)
- * and the link partner advertised none, we will configure
- * ourselves to enable Rx Flow Control only. We can do
- * this safely for two reasons: If the link partner really
- * didn't want flow control enabled, and we enable Rx, no
- * harm done since we won't be receiving any PAUSE frames
- * anyway. If the intent on the link partner was to have
- * flow control enabled, then by us enabling RX only, we
- * can at least receive pause frames and process them.
- * This is a good idea because in most cases, since we are
- * predominantly a server NIC, more times than not we will
- * be asked to delay transmission of packets than asking
- * our link partner to pause transmission of frames.
- */
- else if ((mac->original_fc == e1000_fc_none) ||
- (mac->original_fc == e1000_fc_tx_pause)) {
+ } else {
+ /*
+ * Per the IEEE spec, at this point flow control
+ * should be disabled.
+ */
mac->fc = e1000_fc_none;
hw_dbg(hw, "Flow Control = NONE.\r\n");
- } else {
- mac->fc = e1000_fc_rx_pause;
- hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n");
}
/* Now we need to do one last check... If we auto-
@@ -1164,7 +1140,7 @@
}
/**
- * e1000e_get_speed_and_duplex_copper - Retreive current speed/duplex
+ * e1000e_get_speed_and_duplex_copper - Retrieve current speed/duplex
* @hw: pointer to the HW structure
* @speed: stores the current speed
* @duplex: stores the current duplex
@@ -1200,7 +1176,7 @@
}
/**
- * e1000e_get_speed_and_duplex_fiber_serdes - Retreive current speed/duplex
+ * e1000e_get_speed_and_duplex_fiber_serdes - Retrieve current speed/duplex
* @hw: pointer to the HW structure
* @speed: stores the current speed
* @duplex: stores the current duplex
@@ -1410,7 +1386,7 @@
* e1000e_blink_led - Blink LED
* @hw: pointer to the HW structure
*
- * Blink the led's which are set to be on.
+ * Blink the LEDs which are set to be on.
**/
s32 e1000e_blink_led(struct e1000_hw *hw)
{
@@ -1515,7 +1491,7 @@
* @hw: pointer to the HW structure
*
* Returns 0 if successful, else returns -10
- * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not casued
+ * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused
* the master requests to be disabled.
*
* Disables PCI-Express master access and verifies there are no pending
@@ -1876,7 +1852,7 @@
}
/**
- * e1000e_read_nvm_spi - Read EEPROM's using SPI
+ * e1000e_read_nvm_spi - Reads EEPROM using SPI
* @hw: pointer to the HW structure
* @offset: offset of word in the EEPROM to read
* @words: number of words to read
@@ -1980,7 +1956,7 @@
* Writes data to EEPROM at offset using SPI interface.
*
* If e1000e_update_nvm_checksum is not called after this function , the
- * EEPROM will most likley contain an invalid checksum.
+ * EEPROM will most likely contain an invalid checksum.
**/
s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
{
@@ -2222,7 +2198,7 @@
*
* Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND
*
- * This function checks whether the HOST IF is enabled for command operaton
+ * This function checks whether the HOST IF is enabled for command operation
* and also checks whether the previous command is completed. It busy waits
* in case of previous command is not completed.
**/
@@ -2254,7 +2230,7 @@
}
/**
- * e1000e_check_mng_mode - check managament mode
+ * e1000e_check_mng_mode - check management mode
* @hw: pointer to the HW structure
*
* Reads the firmware semaphore register and returns true (>0) if
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 3031d6d..fc5c63f 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1006,7 +1006,7 @@
* e1000_get_hw_control - get control of the h/w from f/w
* @adapter: address of board private structure
*
- * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
+ * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
* For ASF and Pass Through versions of f/w this means that
* the driver is loaded. For AMT version (only with 82573)
* of the f/w this means that the network i/f is open.
@@ -1032,7 +1032,7 @@
* e1000_release_hw_control - release control of the h/w to f/w
* @adapter: address of board private structure
*
- * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
+ * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
* For ASF and Pass Through versions of f/w this means that the
* driver is no longer loaded. For AMT version (only with 82573) i
* of the f/w this means that the network i/f is closed.
@@ -1241,6 +1241,11 @@
/**
* e1000_update_itr - update the dynamic ITR value based on statistics
+ * @adapter: pointer to adapter
+ * @itr_setting: current adapter->itr
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ *
* Stores a new ITR value based on packets and byte
* counts during the last interrupt. The advantage of per interrupt
* computation is faster updates and more accurate ITR for the current
@@ -1250,10 +1255,6 @@
* while increasing bulk throughput.
* this functionality is controlled by the InterruptThrottleRate module
* parameter (see e1000_param.c)
- * @adapter: pointer to adapter
- * @itr_setting: current adapter->itr
- * @packets: the number of packets during this measurement interval
- * @bytes: the number of bytes during this measurement interval
**/
static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
u16 itr_setting, int packets,
@@ -1366,6 +1367,7 @@
/**
* e1000_clean - NAPI Rx polling callback
* @adapter: board private structure
+ * @budget: amount of packets driver is allowed to process this poll
**/
static int e1000_clean(struct napi_struct *napi, int budget)
{
@@ -2000,7 +2002,7 @@
e1000_check_reset_block(hw))
return;
- /* managebility (AMT) is enabled */
+ /* manageability (AMT) is enabled */
if (er32(MANC) & E1000_MANC_SMBUS_EN)
return;
@@ -3488,7 +3490,6 @@
static void e1000e_disable_l1aspm(struct pci_dev *pdev)
{
int pos;
- u32 cap;
u16 val;
/*
@@ -3503,7 +3504,6 @@
* active.
*/
pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
- pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, &cap);
pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &val);
if (val & 0x2) {
dev_warn(&pdev->dev, "Disabling L1 ASPM\n");
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index fc6fee1..dab3c46 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -121,7 +121,7 @@
* @offset: register offset to be read
* @data: pointer to the read data
*
- * Reads the MDI control regsiter in the PHY at offset and stores the
+ * Reads the MDI control register in the PHY at offset and stores the
* information read to data.
**/
static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
@@ -1172,7 +1172,7 @@
}
/**
- * e1000e_check_downshift - Checks whether a downshift in speed occured
+ * e1000e_check_downshift - Checks whether a downshift in speed occurred
* @hw: pointer to the HW structure
*
* Success returns 0, Failure returns 1
@@ -1388,8 +1388,8 @@
*
* The automatic gain control (agc) normalizes the amplitude of the
* received signal, adjusting for the attenuation produced by the
- * cable. By reading the AGC registers, which reperesent the
- * cobination of course and fine gain value, the value can be put
+ * cable. By reading the AGC registers, which represent the
+ * combination of course and fine gain value, the value can be put
* into a lookup table to obtain the approximate cable length
* for each channel.
**/
@@ -1619,7 +1619,7 @@
* Verify the reset block is not blocking us from resetting. Acquire
* semaphore (if necessary) and read/set/write the device control reset
* bit in the PHY. Wait the appropriate delay time for the device to
- * reset and relase the semaphore (if necessary).
+ * reset and release the semaphore (if necessary).
**/
s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
{
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 88fb53e..7c4ead3 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0083"
+#define DRV_VERSION "EHEA_0087"
/* eHEA capability flags */
#define DLPAR_PORT_ADD_REM 1
@@ -386,6 +386,13 @@
#define EHEA_MAX_PORTS 16
+
+#define EHEA_NUM_PORTRES_FW_HANDLES 6 /* QP handle, SendCQ handle,
+ RecvCQ handle, EQ handle,
+ SendMR handle, RecvMR handle */
+#define EHEA_NUM_PORT_FW_HANDLES 1 /* EQ handle */
+#define EHEA_NUM_ADAPTER_FW_HANDLES 2 /* MR handle, NEQ handle */
+
struct ehea_adapter {
u64 handle;
struct of_device *ofdev;
@@ -405,6 +412,31 @@
u64 macaddr;
};
+/* kdump support */
+struct ehea_fw_handle_entry {
+ u64 adh; /* Adapter Handle */
+ u64 fwh; /* Firmware Handle */
+};
+
+struct ehea_fw_handle_array {
+ struct ehea_fw_handle_entry *arr;
+ int num_entries;
+ struct semaphore lock;
+};
+
+struct ehea_bcmc_reg_entry {
+ u64 adh; /* Adapter Handle */
+ u32 port_id; /* Logical Port Id */
+ u8 reg_type; /* Registration Type */
+ u64 macaddr;
+};
+
+struct ehea_bcmc_reg_array {
+ struct ehea_bcmc_reg_entry *arr;
+ int num_entries;
+ struct semaphore lock;
+};
+
#define EHEA_PORT_UP 1
#define EHEA_PORT_DOWN 0
#define EHEA_PHY_LINK_UP 1
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index c051c7e..21af674 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -35,6 +35,7 @@
#include <linux/if_ether.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
+#include <asm/kexec.h>
#include <net/ip.h>
@@ -98,8 +99,10 @@
static LIST_HEAD(adapter_list);
u64 ehea_driver_flags;
struct work_struct ehea_rereg_mr_task;
-
struct semaphore dlpar_mem_lock;
+struct ehea_fw_handle_array ehea_fw_handles;
+struct ehea_bcmc_reg_array ehea_bcmc_regs;
+
static int __devinit ehea_probe_adapter(struct of_device *dev,
const struct of_device_id *id);
@@ -132,6 +135,160 @@
}
}
+static void ehea_update_firmware_handles(void)
+{
+ struct ehea_fw_handle_entry *arr = NULL;
+ struct ehea_adapter *adapter;
+ int num_adapters = 0;
+ int num_ports = 0;
+ int num_portres = 0;
+ int i = 0;
+ int num_fw_handles, k, l;
+
+ /* Determine number of handles */
+ list_for_each_entry(adapter, &adapter_list, list) {
+ num_adapters++;
+
+ for (k = 0; k < EHEA_MAX_PORTS; k++) {
+ struct ehea_port *port = adapter->port[k];
+
+ if (!port || (port->state != EHEA_PORT_UP))
+ continue;
+
+ num_ports++;
+ num_portres += port->num_def_qps + port->num_add_tx_qps;
+ }
+ }
+
+ num_fw_handles = num_adapters * EHEA_NUM_ADAPTER_FW_HANDLES +
+ num_ports * EHEA_NUM_PORT_FW_HANDLES +
+ num_portres * EHEA_NUM_PORTRES_FW_HANDLES;
+
+ if (num_fw_handles) {
+ arr = kzalloc(num_fw_handles * sizeof(*arr), GFP_KERNEL);
+ if (!arr)
+ return; /* Keep the existing array */
+ } else
+ goto out_update;
+
+ list_for_each_entry(adapter, &adapter_list, list) {
+ for (k = 0; k < EHEA_MAX_PORTS; k++) {
+ struct ehea_port *port = adapter->port[k];
+
+ if (!port || (port->state != EHEA_PORT_UP))
+ continue;
+
+ for (l = 0;
+ l < port->num_def_qps + port->num_add_tx_qps;
+ l++) {
+ struct ehea_port_res *pr = &port->port_res[l];
+
+ arr[i].adh = adapter->handle;
+ arr[i++].fwh = pr->qp->fw_handle;
+ arr[i].adh = adapter->handle;
+ arr[i++].fwh = pr->send_cq->fw_handle;
+ arr[i].adh = adapter->handle;
+ arr[i++].fwh = pr->recv_cq->fw_handle;
+ arr[i].adh = adapter->handle;
+ arr[i++].fwh = pr->eq->fw_handle;
+ arr[i].adh = adapter->handle;
+ arr[i++].fwh = pr->send_mr.handle;
+ arr[i].adh = adapter->handle;
+ arr[i++].fwh = pr->recv_mr.handle;
+ }
+ arr[i].adh = adapter->handle;
+ arr[i++].fwh = port->qp_eq->fw_handle;
+ }
+
+ arr[i].adh = adapter->handle;
+ arr[i++].fwh = adapter->neq->fw_handle;
+
+ if (adapter->mr.handle) {
+ arr[i].adh = adapter->handle;
+ arr[i++].fwh = adapter->mr.handle;
+ }
+ }
+
+out_update:
+ kfree(ehea_fw_handles.arr);
+ ehea_fw_handles.arr = arr;
+ ehea_fw_handles.num_entries = i;
+}
+
+static void ehea_update_bcmc_registrations(void)
+{
+ struct ehea_bcmc_reg_entry *arr = NULL;
+ struct ehea_adapter *adapter;
+ struct ehea_mc_list *mc_entry;
+ int num_registrations = 0;
+ int i = 0;
+ int k;
+
+ /* Determine number of registrations */
+ list_for_each_entry(adapter, &adapter_list, list)
+ for (k = 0; k < EHEA_MAX_PORTS; k++) {
+ struct ehea_port *port = adapter->port[k];
+
+ if (!port || (port->state != EHEA_PORT_UP))
+ continue;
+
+ num_registrations += 2; /* Broadcast registrations */
+
+ list_for_each_entry(mc_entry, &port->mc_list->list,list)
+ num_registrations += 2;
+ }
+
+ if (num_registrations) {
+ arr = kzalloc(num_registrations * sizeof(*arr), GFP_KERNEL);
+ if (!arr)
+ return; /* Keep the existing array */
+ } else
+ goto out_update;
+
+ list_for_each_entry(adapter, &adapter_list, list) {
+ for (k = 0; k < EHEA_MAX_PORTS; k++) {
+ struct ehea_port *port = adapter->port[k];
+
+ if (!port || (port->state != EHEA_PORT_UP))
+ continue;
+
+ arr[i].adh = adapter->handle;
+ arr[i].port_id = port->logical_port_id;
+ arr[i].reg_type = EHEA_BCMC_BROADCAST |
+ EHEA_BCMC_UNTAGGED;
+ arr[i++].macaddr = port->mac_addr;
+
+ arr[i].adh = adapter->handle;
+ arr[i].port_id = port->logical_port_id;
+ arr[i].reg_type = EHEA_BCMC_BROADCAST |
+ EHEA_BCMC_VLANID_ALL;
+ arr[i++].macaddr = port->mac_addr;
+
+ list_for_each_entry(mc_entry,
+ &port->mc_list->list, list) {
+ arr[i].adh = adapter->handle;
+ arr[i].port_id = port->logical_port_id;
+ arr[i].reg_type = EHEA_BCMC_SCOPE_ALL |
+ EHEA_BCMC_MULTICAST |
+ EHEA_BCMC_UNTAGGED;
+ arr[i++].macaddr = mc_entry->macaddr;
+
+ arr[i].adh = adapter->handle;
+ arr[i].port_id = port->logical_port_id;
+ arr[i].reg_type = EHEA_BCMC_SCOPE_ALL |
+ EHEA_BCMC_MULTICAST |
+ EHEA_BCMC_VLANID_ALL;
+ arr[i++].macaddr = mc_entry->macaddr;
+ }
+ }
+ }
+
+out_update:
+ kfree(ehea_bcmc_regs.arr);
+ ehea_bcmc_regs.arr = arr;
+ ehea_bcmc_regs.num_entries = i;
+}
+
static struct net_device_stats *ehea_get_stats(struct net_device *dev)
{
struct ehea_port *port = netdev_priv(dev);
@@ -1601,19 +1758,25 @@
memcpy(dev->dev_addr, mac_addr->sa_data, dev->addr_len);
+ down(&ehea_bcmc_regs.lock);
+
/* Deregister old MAC in pHYP */
ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
if (ret)
- goto out_free;
+ goto out_upregs;
port->mac_addr = cb0->port_mac_addr << 16;
/* Register new MAC in pHYP */
ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
if (ret)
- goto out_free;
+ goto out_upregs;
ret = 0;
+
+out_upregs:
+ ehea_update_bcmc_registrations();
+ up(&ehea_bcmc_regs.lock);
out_free:
kfree(cb0);
out:
@@ -1775,9 +1938,11 @@
}
ehea_promiscuous(dev, 0);
+ down(&ehea_bcmc_regs.lock);
+
if (dev->flags & IFF_ALLMULTI) {
ehea_allmulti(dev, 1);
- return;
+ goto out;
}
ehea_allmulti(dev, 0);
@@ -1803,6 +1968,8 @@
}
out:
+ ehea_update_bcmc_registrations();
+ up(&ehea_bcmc_regs.lock);
return;
}
@@ -2285,6 +2452,8 @@
if (port->state == EHEA_PORT_UP)
return 0;
+ down(&ehea_fw_handles.lock);
+
ret = ehea_port_res_setup(port, port->num_def_qps,
port->num_add_tx_qps);
if (ret) {
@@ -2321,8 +2490,17 @@
}
}
- ret = 0;
+ down(&ehea_bcmc_regs.lock);
+
+ ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
+ if (ret) {
+ ret = -EIO;
+ goto out_free_irqs;
+ }
+
port->state = EHEA_PORT_UP;
+
+ ret = 0;
goto out;
out_free_irqs:
@@ -2334,6 +2512,12 @@
if (ret)
ehea_info("Failed starting %s. ret=%i", dev->name, ret);
+ ehea_update_bcmc_registrations();
+ up(&ehea_bcmc_regs.lock);
+
+ ehea_update_firmware_handles();
+ up(&ehea_fw_handles.lock);
+
return ret;
}
@@ -2382,16 +2566,27 @@
if (port->state == EHEA_PORT_DOWN)
return 0;
+ down(&ehea_bcmc_regs.lock);
ehea_drop_multicast_list(dev);
+ ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
+
ehea_free_interrupts(dev);
+ down(&ehea_fw_handles.lock);
+
port->state = EHEA_PORT_DOWN;
+ ehea_update_bcmc_registrations();
+ up(&ehea_bcmc_regs.lock);
+
ret = ehea_clean_all_portres(port);
if (ret)
ehea_info("Failed freeing resources for %s. ret=%i",
dev->name, ret);
+ ehea_update_firmware_handles();
+ up(&ehea_fw_handles.lock);
+
return ret;
}
@@ -2920,19 +3115,12 @@
dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT;
INIT_WORK(&port->reset_task, ehea_reset_port);
-
- ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
- if (ret) {
- ret = -EIO;
- goto out_unreg_port;
- }
-
ehea_set_ethtool_ops(dev);
ret = register_netdev(dev);
if (ret) {
ehea_error("register_netdev failed. ret=%d", ret);
- goto out_dereg_bc;
+ goto out_unreg_port;
}
port->lro_max_aggr = lro_max_aggr;
@@ -2949,9 +3137,6 @@
return port;
-out_dereg_bc:
- ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
-
out_unreg_port:
ehea_unregister_port(port);
@@ -2971,7 +3156,6 @@
{
unregister_netdev(port->netdev);
ehea_unregister_port(port);
- ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
kfree(port->mc_list);
free_netdev(port->netdev);
port->adapter->active_ports--;
@@ -3014,7 +3198,6 @@
i++;
};
-
return 0;
}
@@ -3159,6 +3342,7 @@
ehea_error("Invalid ibmebus device probed");
return -EINVAL;
}
+ down(&ehea_fw_handles.lock);
adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
if (!adapter) {
@@ -3239,7 +3423,10 @@
out_free_ad:
kfree(adapter);
+
out:
+ ehea_update_firmware_handles();
+ up(&ehea_fw_handles.lock);
return ret;
}
@@ -3258,18 +3445,41 @@
flush_scheduled_work();
+ down(&ehea_fw_handles.lock);
+
ibmebus_free_irq(adapter->neq->attr.ist1, adapter);
tasklet_kill(&adapter->neq_tasklet);
ehea_destroy_eq(adapter->neq);
ehea_remove_adapter_mr(adapter);
list_del(&adapter->list);
-
kfree(adapter);
+ ehea_update_firmware_handles();
+ up(&ehea_fw_handles.lock);
+
return 0;
}
+void ehea_crash_handler(void)
+{
+ int i;
+
+ if (ehea_fw_handles.arr)
+ for (i = 0; i < ehea_fw_handles.num_entries; i++)
+ ehea_h_free_resource(ehea_fw_handles.arr[i].adh,
+ ehea_fw_handles.arr[i].fwh,
+ FORCE_FREE);
+
+ if (ehea_bcmc_regs.arr)
+ for (i = 0; i < ehea_bcmc_regs.num_entries; i++)
+ ehea_h_reg_dereg_bcmc(ehea_bcmc_regs.arr[i].adh,
+ ehea_bcmc_regs.arr[i].port_id,
+ ehea_bcmc_regs.arr[i].reg_type,
+ ehea_bcmc_regs.arr[i].macaddr,
+ 0, H_DEREG_BCMC);
+}
+
static int ehea_reboot_notifier(struct notifier_block *nb,
unsigned long action, void *unused)
{
@@ -3330,7 +3540,12 @@
INIT_WORK(&ehea_rereg_mr_task, ehea_rereg_mrs);
+ memset(&ehea_fw_handles, 0, sizeof(ehea_fw_handles));
+ memset(&ehea_bcmc_regs, 0, sizeof(ehea_bcmc_regs));
+
sema_init(&dlpar_mem_lock, 1);
+ sema_init(&ehea_fw_handles.lock, 1);
+ sema_init(&ehea_bcmc_regs.lock, 1);
ret = check_module_parm();
if (ret)
@@ -3340,12 +3555,18 @@
if (ret)
goto out;
- register_reboot_notifier(&ehea_reboot_nb);
+ ret = register_reboot_notifier(&ehea_reboot_nb);
+ if (ret)
+ ehea_info("failed registering reboot notifier");
+
+ ret = crash_shutdown_register(&ehea_crash_handler);
+ if (ret)
+ ehea_info("failed registering crash handler");
ret = ibmebus_register_driver(&ehea_driver);
if (ret) {
ehea_error("failed registering eHEA device driver on ebus");
- goto out;
+ goto out2;
}
ret = driver_create_file(&ehea_driver.driver,
@@ -3353,21 +3574,33 @@
if (ret) {
ehea_error("failed to register capabilities attribute, ret=%d",
ret);
- unregister_reboot_notifier(&ehea_reboot_nb);
- ibmebus_unregister_driver(&ehea_driver);
- goto out;
+ goto out3;
}
+ return ret;
+
+out3:
+ ibmebus_unregister_driver(&ehea_driver);
+out2:
+ unregister_reboot_notifier(&ehea_reboot_nb);
+ crash_shutdown_unregister(&ehea_crash_handler);
out:
return ret;
}
static void __exit ehea_module_exit(void)
{
+ int ret;
+
flush_scheduled_work();
driver_remove_file(&ehea_driver.driver, &driver_attr_capabilities);
ibmebus_unregister_driver(&ehea_driver);
unregister_reboot_notifier(&ehea_reboot_nb);
+ ret = crash_shutdown_unregister(&ehea_crash_handler);
+ if (ret)
+ ehea_info("failed unregistering crash handler");
+ kfree(ehea_fw_handles.arr);
+ kfree(ehea_bcmc_regs.arr);
ehea_destroy_busmap();
}
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 42d94ed..af869cf 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -946,16 +946,11 @@
{
struct fs_enet_private *fep = netdev_priv(dev);
struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&rq->ifr_data;
- unsigned long flags;
- int rc;
if (!netif_running(dev))
return -EINVAL;
- spin_lock_irqsave(&fep->lock, flags);
- rc = phy_mii_ioctl(fep->phydev, mii, cmd);
- spin_unlock_irqrestore(&fep->lock, flags);
- return rc;
+ return phy_mii_ioctl(fep->phydev, mii, cmd);
}
extern int fs_mii_connect(struct net_device *dev);
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 4244fc2..718cf77 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -605,7 +605,7 @@
free_skb_resources(priv);
- dma_free_coherent(NULL,
+ dma_free_coherent(&dev->dev,
sizeof(struct txbd8)*priv->tx_ring_size
+ sizeof(struct rxbd8)*priv->rx_ring_size,
priv->tx_bd_base,
@@ -626,7 +626,7 @@
for (i = 0; i < priv->tx_ring_size; i++) {
if (priv->tx_skbuff[i]) {
- dma_unmap_single(NULL, txbdp->bufPtr,
+ dma_unmap_single(&priv->dev->dev, txbdp->bufPtr,
txbdp->length,
DMA_TO_DEVICE);
dev_kfree_skb_any(priv->tx_skbuff[i]);
@@ -643,7 +643,7 @@
if(priv->rx_skbuff != NULL) {
for (i = 0; i < priv->rx_ring_size; i++) {
if (priv->rx_skbuff[i]) {
- dma_unmap_single(NULL, rxbdp->bufPtr,
+ dma_unmap_single(&priv->dev->dev, rxbdp->bufPtr,
priv->rx_buffer_size,
DMA_FROM_DEVICE);
@@ -708,7 +708,7 @@
gfar_write(®s->imask, IMASK_INIT_CLEAR);
/* Allocate memory for the buffer descriptors */
- vaddr = (unsigned long) dma_alloc_coherent(NULL,
+ vaddr = (unsigned long) dma_alloc_coherent(&dev->dev,
sizeof (struct txbd8) * priv->tx_ring_size +
sizeof (struct rxbd8) * priv->rx_ring_size,
&addr, GFP_KERNEL);
@@ -919,7 +919,7 @@
rx_skb_fail:
free_skb_resources(priv);
tx_skb_fail:
- dma_free_coherent(NULL,
+ dma_free_coherent(&dev->dev,
sizeof(struct txbd8)*priv->tx_ring_size
+ sizeof(struct rxbd8)*priv->rx_ring_size,
priv->tx_bd_base,
@@ -1053,7 +1053,7 @@
/* Set buffer length and pointer */
txbdp->length = skb->len;
- txbdp->bufPtr = dma_map_single(NULL, skb->data,
+ txbdp->bufPtr = dma_map_single(&dev->dev, skb->data,
skb->len, DMA_TO_DEVICE);
/* Save the skb pointer so we can free it later */
@@ -1332,7 +1332,7 @@
*/
skb_reserve(skb, alignamount);
- bdp->bufPtr = dma_map_single(NULL, skb->data,
+ bdp->bufPtr = dma_map_single(&dev->dev, skb->data,
priv->rx_buffer_size, DMA_FROM_DEVICE);
bdp->length = 0;
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index bff280e..6a1f230 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -439,7 +439,7 @@
err = igb_request_msix(adapter);
if (!err) {
/* enable IAM, auto-mask,
- * DO NOT USE EIAME or IAME in legacy mode */
+ * DO NOT USE EIAM or IAM in legacy mode */
wr32(E1000_IAM, IMS_ENABLE_MASK);
goto request_done;
}
@@ -465,14 +465,9 @@
err = request_irq(adapter->pdev->irq, &igb_intr, IRQF_SHARED,
netdev->name, netdev);
- if (err) {
+ if (err)
dev_err(&adapter->pdev->dev, "Error %d getting interrupt\n",
err);
- goto request_done;
- }
-
- /* enable IAM, auto-mask */
- wr32(E1000_IAM, IMS_ENABLE_MASK);
request_done:
return err;
@@ -821,7 +816,8 @@
wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
igb_reset_adaptive(&adapter->hw);
- adapter->hw.phy.ops.get_phy_info(&adapter->hw);
+ if (adapter->hw.phy.ops.get_phy_info)
+ adapter->hw.phy.ops.get_phy_info(&adapter->hw);
}
/**
@@ -2057,7 +2053,8 @@
static void igb_update_phy_info(unsigned long data)
{
struct igb_adapter *adapter = (struct igb_adapter *) data;
- adapter->hw.phy.ops.get_phy_info(&adapter->hw);
+ if (adapter->hw.phy.ops.get_phy_info)
+ adapter->hw.phy.ops.get_phy_info(&adapter->hw);
}
/**
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index 53a9fd0..75f3a68 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -67,6 +67,7 @@
{"rx_over_errors", IXGB_STAT(net_stats.rx_over_errors)},
{"rx_crc_errors", IXGB_STAT(net_stats.rx_crc_errors)},
{"rx_frame_errors", IXGB_STAT(net_stats.rx_frame_errors)},
+ {"rx_no_buffer_count", IXGB_STAT(stats.rnbc)},
{"rx_fifo_errors", IXGB_STAT(net_stats.rx_fifo_errors)},
{"rx_missed_errors", IXGB_STAT(net_stats.rx_missed_errors)},
{"tx_aborted_errors", IXGB_STAT(net_stats.tx_aborted_errors)},
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 81bf005..1d210ed 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -148,7 +148,7 @@
if (phydev->duplex)
reg |= MACB_BIT(FD);
- if (phydev->speed)
+ if (phydev->speed == SPEED_100)
reg |= MACB_BIT(SPD);
macb_writel(bp, NCFGR, reg);
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index e98ce1e..d11ba61 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -1616,12 +1616,13 @@
if (index >= niu_num_alt_addr(np))
return -EINVAL;
- if (np->flags & NIU_FLAGS_XMAC)
+ if (np->flags & NIU_FLAGS_XMAC) {
reg = XMAC_ADDR_CMPEN;
- else
+ mask = 1 << index;
+ } else {
reg = BMAC_ADDR_CMPEN;
-
- mask = 1 << index;
+ mask = 1 << (index + 1);
+ }
val = nr64_mac(reg);
if (on)
diff --git a/drivers/net/niu.h b/drivers/net/niu.h
index 0e8626a..59dc05fc 100644
--- a/drivers/net/niu.h
+++ b/drivers/net/niu.h
@@ -499,7 +499,7 @@
#define BMAC_ADDR2 0x00110UL
#define BMAC_ADDR2_ADDR2 0x000000000000ffffULL
-#define BMAC_NUM_ALT_ADDR 7
+#define BMAC_NUM_ALT_ADDR 6
#define BMAC_ALT_ADDR0(NUM) (0x00118UL + (NUM)*0x18UL)
#define BMAC_ALT_ADDR0_ADDR0 0x000000000000ffffULL
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 6323988..fd8158a 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -590,6 +590,13 @@
dev->if_port = 0;
}
+ if ((link->conf.ConfigBase == 0x03c0)
+ && (link->manf_id == 0x149) && (link->card_id = 0xc1ab)) {
+ printk(KERN_INFO "pcnet_cs: this is an AX88190 card!\n");
+ printk(KERN_INFO "pcnet_cs: use axnet_cs instead.\n");
+ goto failed;
+ }
+
local_hw_info = get_hwinfo(link);
if (local_hw_info == NULL)
local_hw_info = get_prom(link);
@@ -1567,12 +1574,11 @@
PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0145),
PCMCIA_DEVICE_MANF_CARD(0x0149, 0x0230),
PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530),
-/* PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab), conflict with axnet_cs */
+ PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab),
PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110),
PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x2328),
PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041),
PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452),
-/* PCMCIA_DEVICE_MANF_CARD(0x021b, 0x0202), conflict with axnet_cs */
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300),
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0307),
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030a),
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 6e9f619..963630c 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -49,13 +49,13 @@
int i;
int err = 0;
- mutex_init(&bus->mdio_lock);
-
if (NULL == bus || NULL == bus->name ||
NULL == bus->read ||
NULL == bus->write)
return -EINVAL;
+ mutex_init(&bus->mdio_lock);
+
if (bus->reset)
bus->reset(bus);
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 750d2a9..daf5aba 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -2690,6 +2690,7 @@
return -ENOMEM;
/* setup net_device structure */
+ SET_NETDEV_DEV(netdev, &card->dev->core);
gelic_wl_setup_netdev_ops(netdev);
/* setup some of net_device and register it */
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 202fdf3..20745fd 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -1633,13 +1633,18 @@
static int __devinit sis190_get_mac_addr(struct pci_dev *pdev,
struct net_device *dev)
{
- u8 from;
+ int rc;
- pci_read_config_byte(pdev, 0x73, &from);
+ rc = sis190_get_mac_addr_from_eeprom(pdev, dev);
+ if (rc < 0) {
+ u8 reg;
- return (from & 0x00000001) ?
- sis190_get_mac_addr_from_apc(pdev, dev) :
- sis190_get_mac_addr_from_eeprom(pdev, dev);
+ pci_read_config_byte(pdev, 0x73, ®);
+
+ if (reg & 0x00000001)
+ rc = sis190_get_mac_addr_from_apc(pdev, dev);
+ }
+ return rc;
}
static void sis190_set_speed_auto(struct net_device *dev)
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 9a62959..54c6626 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -572,8 +572,9 @@
default:
/* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
+
/* turn off the Rx LED (LED_RX) */
- ledover &= ~PHY_M_LED_MO_RX;
+ ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
}
if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
@@ -602,7 +603,7 @@
if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
/* turn on 100 Mbps LED (LED_LINK100) */
- ledover |= PHY_M_LED_MO_100;
+ ledover |= PHY_M_LED_MO_100(MO_LED_ON);
}
if (ledover)
@@ -3322,82 +3323,80 @@
/* Can have one global because blinking is controlled by
* ethtool and that is always under RTNL mutex
*/
-static void sky2_led(struct sky2_hw *hw, unsigned port, int on)
+static void sky2_led(struct sky2_port *sky2, enum led_mode mode)
{
- u16 pg;
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
- switch (hw->chip_id) {
- case CHIP_ID_YUKON_XL:
+ spin_lock_bh(&sky2->phy_lock);
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
+ hw->chip_id == CHIP_ID_YUKON_EX ||
+ hw->chip_id == CHIP_ID_YUKON_SUPR) {
+ u16 pg;
pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
- gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
- on ? (PHY_M_LEDC_LOS_CTRL(1) |
- PHY_M_LEDC_INIT_CTRL(7) |
- PHY_M_LEDC_STA1_CTRL(7) |
- PHY_M_LEDC_STA0_CTRL(7))
- : 0);
+
+ switch (mode) {
+ case MO_LED_OFF:
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ PHY_M_LEDC_LOS_CTRL(8) |
+ PHY_M_LEDC_INIT_CTRL(8) |
+ PHY_M_LEDC_STA1_CTRL(8) |
+ PHY_M_LEDC_STA0_CTRL(8));
+ break;
+ case MO_LED_ON:
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ PHY_M_LEDC_LOS_CTRL(9) |
+ PHY_M_LEDC_INIT_CTRL(9) |
+ PHY_M_LEDC_STA1_CTRL(9) |
+ PHY_M_LEDC_STA0_CTRL(9));
+ break;
+ case MO_LED_BLINK:
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ PHY_M_LEDC_LOS_CTRL(0xa) |
+ PHY_M_LEDC_INIT_CTRL(0xa) |
+ PHY_M_LEDC_STA1_CTRL(0xa) |
+ PHY_M_LEDC_STA0_CTRL(0xa));
+ break;
+ case MO_LED_NORM:
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ PHY_M_LEDC_LOS_CTRL(1) |
+ PHY_M_LEDC_INIT_CTRL(8) |
+ PHY_M_LEDC_STA1_CTRL(7) |
+ PHY_M_LEDC_STA0_CTRL(7));
+ }
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
- break;
-
- default:
- gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+ } else
gm_phy_write(hw, port, PHY_MARV_LED_OVER,
- on ? PHY_M_LED_ALL : 0);
- }
+ PHY_M_LED_MO_DUP(mode) |
+ PHY_M_LED_MO_10(mode) |
+ PHY_M_LED_MO_100(mode) |
+ PHY_M_LED_MO_1000(mode) |
+ PHY_M_LED_MO_RX(mode) |
+ PHY_M_LED_MO_TX(mode));
+
+ spin_unlock_bh(&sky2->phy_lock);
}
/* blink LED's for finding board */
static int sky2_phys_id(struct net_device *dev, u32 data)
{
struct sky2_port *sky2 = netdev_priv(dev);
- struct sky2_hw *hw = sky2->hw;
- unsigned port = sky2->port;
- u16 ledctrl, ledover = 0;
- long ms;
- int interrupted;
- int onoff = 1;
+ unsigned int i;
- if (!data || data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ))
- ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT);
- else
- ms = data * 1000;
+ if (data == 0)
+ data = UINT_MAX;
- /* save initial values */
- spin_lock_bh(&sky2->phy_lock);
- if (hw->chip_id == CHIP_ID_YUKON_XL) {
- u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
- ledctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
- } else {
- ledctrl = gm_phy_read(hw, port, PHY_MARV_LED_CTRL);
- ledover = gm_phy_read(hw, port, PHY_MARV_LED_OVER);
+ for (i = 0; i < data; i++) {
+ sky2_led(sky2, MO_LED_ON);
+ if (msleep_interruptible(500))
+ break;
+ sky2_led(sky2, MO_LED_OFF);
+ if (msleep_interruptible(500))
+ break;
}
-
- interrupted = 0;
- while (!interrupted && ms > 0) {
- sky2_led(hw, port, onoff);
- onoff = !onoff;
-
- spin_unlock_bh(&sky2->phy_lock);
- interrupted = msleep_interruptible(250);
- spin_lock_bh(&sky2->phy_lock);
-
- ms -= 250;
- }
-
- /* resume regularly scheduled programming */
- if (hw->chip_id == CHIP_ID_YUKON_XL) {
- u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
- gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ledctrl);
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
- } else {
- gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
- gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
- }
- spin_unlock_bh(&sky2->phy_lock);
+ sky2_led(sky2, MO_LED_NORM);
return 0;
}
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 5ab5c1c..7bb3ba9 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1318,18 +1318,21 @@
BLINK_670MS = 4,/* 670 ms */
};
-/**** PHY_MARV_LED_OVER 16 bit r/w LED control */
-enum {
- PHY_M_LED_MO_DUP = 3<<10,/* Bit 11..10: Duplex */
- PHY_M_LED_MO_10 = 3<<8, /* Bit 9.. 8: Link 10 */
- PHY_M_LED_MO_100 = 3<<6, /* Bit 7.. 6: Link 100 */
- PHY_M_LED_MO_1000 = 3<<4, /* Bit 5.. 4: Link 1000 */
- PHY_M_LED_MO_RX = 3<<2, /* Bit 3.. 2: Rx */
- PHY_M_LED_MO_TX = 3<<0, /* Bit 1.. 0: Tx */
+/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/
+#define PHY_M_LED_MO_SGMII(x) ((x)<<14) /* Bit 15..14: SGMII AN Timer */
- PHY_M_LED_ALL = PHY_M_LED_MO_DUP | PHY_M_LED_MO_10
- | PHY_M_LED_MO_100 | PHY_M_LED_MO_1000
- | PHY_M_LED_MO_RX,
+#define PHY_M_LED_MO_DUP(x) ((x)<<10) /* Bit 11..10: Duplex */
+#define PHY_M_LED_MO_10(x) ((x)<<8) /* Bit 9.. 8: Link 10 */
+#define PHY_M_LED_MO_100(x) ((x)<<6) /* Bit 7.. 6: Link 100 */
+#define PHY_M_LED_MO_1000(x) ((x)<<4) /* Bit 5.. 4: Link 1000 */
+#define PHY_M_LED_MO_RX(x) ((x)<<2) /* Bit 3.. 2: Rx */
+#define PHY_M_LED_MO_TX(x) ((x)<<0) /* Bit 1.. 0: Tx */
+
+enum led_mode {
+ MO_LED_NORM = 0,
+ MO_LED_BLINK = 1,
+ MO_LED_OFF = 2,
+ MO_LED_ON = 3,
};
/***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index db606b6..26ffb67 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -8781,7 +8781,7 @@
return -EAGAIN;
if (data == 0)
- data = 2;
+ data = UINT_MAX / 2;
for (i = 0; i < (data * 2); i++) {
if ((i % 2) == 0)
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 3af5b92..0166407 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -1400,7 +1400,7 @@
*
**************************************************************/
-u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int )
{
/* printk( "TLAN: Invalid interrupt on %s.\n", dev->name ); */
return 0;
@@ -1432,7 +1432,7 @@
*
**************************************************************/
-u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
{
TLanPrivateInfo *priv = netdev_priv(dev);
int eoc = 0;
@@ -1518,7 +1518,7 @@
*
**************************************************************/
-u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int )
{
TLan_ReadAndClearStats( dev, TLAN_RECORD );
@@ -1554,7 +1554,7 @@
*
**************************************************************/
-u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int )
{
TLanPrivateInfo *priv = netdev_priv(dev);
u32 ack = 0;
@@ -1689,7 +1689,7 @@
*
**************************************************************/
-u32 TLan_HandleDummy( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleDummy( struct net_device *dev, u16 host_int )
{
printk( "TLAN: Test interrupt on %s.\n", dev->name );
return 1;
@@ -1719,7 +1719,7 @@
*
**************************************************************/
-u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int )
{
TLanPrivateInfo *priv = netdev_priv(dev);
TLanList *head_list;
@@ -1767,7 +1767,7 @@
*
**************************************************************/
-u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int )
{
TLanPrivateInfo *priv = netdev_priv(dev);
u32 ack;
@@ -1842,7 +1842,7 @@
*
**************************************************************/
-u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int )
+static u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int )
{
TLanPrivateInfo *priv = netdev_priv(dev);
dma_addr_t head_list_phys;
@@ -1902,7 +1902,7 @@
*
**************************************************************/
-void TLan_Timer( unsigned long data )
+static void TLan_Timer( unsigned long data )
{
struct net_device *dev = (struct net_device *) data;
TLanPrivateInfo *priv = netdev_priv(dev);
@@ -1983,7 +1983,7 @@
*
**************************************************************/
-void TLan_ResetLists( struct net_device *dev )
+static void TLan_ResetLists( struct net_device *dev )
{
TLanPrivateInfo *priv = netdev_priv(dev);
int i;
@@ -2043,7 +2043,7 @@
} /* TLan_ResetLists */
-void TLan_FreeLists( struct net_device *dev )
+static void TLan_FreeLists( struct net_device *dev )
{
TLanPrivateInfo *priv = netdev_priv(dev);
int i;
@@ -2092,7 +2092,7 @@
*
**************************************************************/
-void TLan_PrintDio( u16 io_base )
+static void TLan_PrintDio( u16 io_base )
{
u32 data0, data1;
int i;
@@ -2127,7 +2127,7 @@
*
**************************************************************/
-void TLan_PrintList( TLanList *list, char *type, int num)
+static void TLan_PrintList( TLanList *list, char *type, int num)
{
int i;
@@ -2163,7 +2163,7 @@
*
**************************************************************/
-void TLan_ReadAndClearStats( struct net_device *dev, int record )
+static void TLan_ReadAndClearStats( struct net_device *dev, int record )
{
TLanPrivateInfo *priv = netdev_priv(dev);
u32 tx_good, tx_under;
@@ -2238,7 +2238,7 @@
*
**************************************************************/
-void
+static void
TLan_ResetAdapter( struct net_device *dev )
{
TLanPrivateInfo *priv = netdev_priv(dev);
@@ -2324,7 +2324,7 @@
-void
+static void
TLan_FinishReset( struct net_device *dev )
{
TLanPrivateInfo *priv = netdev_priv(dev);
@@ -2448,7 +2448,7 @@
*
**************************************************************/
-void TLan_SetMac( struct net_device *dev, int areg, char *mac )
+static void TLan_SetMac( struct net_device *dev, int areg, char *mac )
{
int i;
@@ -2490,7 +2490,7 @@
*
********************************************************************/
-void TLan_PhyPrint( struct net_device *dev )
+static void TLan_PhyPrint( struct net_device *dev )
{
TLanPrivateInfo *priv = netdev_priv(dev);
u16 i, data0, data1, data2, data3, phy;
@@ -2539,7 +2539,7 @@
*
********************************************************************/
-void TLan_PhyDetect( struct net_device *dev )
+static void TLan_PhyDetect( struct net_device *dev )
{
TLanPrivateInfo *priv = netdev_priv(dev);
u16 control;
@@ -2586,7 +2586,7 @@
-void TLan_PhyPowerDown( struct net_device *dev )
+static void TLan_PhyPowerDown( struct net_device *dev )
{
TLanPrivateInfo *priv = netdev_priv(dev);
u16 value;
@@ -2611,7 +2611,7 @@
-void TLan_PhyPowerUp( struct net_device *dev )
+static void TLan_PhyPowerUp( struct net_device *dev )
{
TLanPrivateInfo *priv = netdev_priv(dev);
u16 value;
@@ -2632,7 +2632,7 @@
-void TLan_PhyReset( struct net_device *dev )
+static void TLan_PhyReset( struct net_device *dev )
{
TLanPrivateInfo *priv = netdev_priv(dev);
u16 phy;
@@ -2660,7 +2660,7 @@
-void TLan_PhyStartLink( struct net_device *dev )
+static void TLan_PhyStartLink( struct net_device *dev )
{
TLanPrivateInfo *priv = netdev_priv(dev);
u16 ability;
@@ -2747,7 +2747,7 @@
-void TLan_PhyFinishAutoNeg( struct net_device *dev )
+static void TLan_PhyFinishAutoNeg( struct net_device *dev )
{
TLanPrivateInfo *priv = netdev_priv(dev);
u16 an_adv;
@@ -2903,7 +2903,7 @@
*
**************************************************************/
-int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
+static int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
{
u8 nack;
u16 sio, tmp;
@@ -2993,7 +2993,7 @@
*
**************************************************************/
-void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits )
+static void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits )
{
u16 sio;
u32 i;
@@ -3035,7 +3035,7 @@
*
**************************************************************/
-void TLan_MiiSync( u16 base_port )
+static void TLan_MiiSync( u16 base_port )
{
int i;
u16 sio;
@@ -3074,7 +3074,7 @@
*
**************************************************************/
-void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val )
+static void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val )
{
u16 sio;
int minten;
@@ -3144,7 +3144,7 @@
*
**************************************************************/
-void TLan_EeSendStart( u16 io_base )
+static void TLan_EeSendStart( u16 io_base )
{
u16 sio;
@@ -3184,7 +3184,7 @@
*
**************************************************************/
-int TLan_EeSendByte( u16 io_base, u8 data, int stop )
+static int TLan_EeSendByte( u16 io_base, u8 data, int stop )
{
int err;
u8 place;
@@ -3245,7 +3245,7 @@
*
**************************************************************/
-void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop )
+static void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop )
{
u8 place;
u16 sio;
@@ -3303,7 +3303,7 @@
*
**************************************************************/
-int TLan_EeReadByte( struct net_device *dev, u8 ee_addr, u8 *data )
+static int TLan_EeReadByte( struct net_device *dev, u8 ee_addr, u8 *data )
{
int err;
TLanPrivateInfo *priv = netdev_priv(dev);
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index a7afeea..a59c1f2 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -482,9 +482,11 @@
struct uli526x_board_info *db = netdev_priv(dev);
unsigned long ioaddr = db->ioaddr;
u8 phy_tmp;
+ u8 timeout;
u16 phy_value;
u16 phy_reg_reset;
+
ULI526X_DBUG(0, "uli526x_init()", 0);
/* Reset M526x MAC controller */
@@ -509,11 +511,19 @@
/* Parser SROM and media mode */
db->media_mode = uli526x_media_mode;
- /* Phyxcer capability setting */
+ /* phyxcer capability setting */
phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id);
phy_reg_reset = (phy_reg_reset | 0x8000);
phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id);
+
+ /* See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management
+ * functions") or phy data sheet for details on phy reset
+ */
udelay(500);
+ timeout = 10;
+ while (timeout-- &&
+ phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id) & 0x8000)
+ udelay(100);
/* Process Phyxcer Media Mode */
uli526x_set_phyxcer(db);
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 3f67a29..e2ad98b 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -244,18 +244,6 @@
return 0;
}
-static int veth_close(struct net_device *dev)
-{
- struct veth_priv *priv;
-
- if (netif_carrier_ok(dev)) {
- priv = netdev_priv(dev);
- netif_carrier_off(dev);
- netif_carrier_off(priv->peer);
- }
- return 0;
-}
-
static int veth_dev_init(struct net_device *dev)
{
struct veth_net_stats *stats;
@@ -286,13 +274,50 @@
dev->hard_start_xmit = veth_xmit;
dev->get_stats = veth_get_stats;
dev->open = veth_open;
- dev->stop = veth_close;
dev->ethtool_ops = &veth_ethtool_ops;
dev->features |= NETIF_F_LLTX;
dev->init = veth_dev_init;
dev->destructor = veth_dev_free;
}
+static void veth_change_state(struct net_device *dev)
+{
+ struct net_device *peer;
+ struct veth_priv *priv;
+
+ priv = netdev_priv(dev);
+ peer = priv->peer;
+
+ if (netif_carrier_ok(peer)) {
+ if (!netif_carrier_ok(dev))
+ netif_carrier_on(dev);
+ } else {
+ if (netif_carrier_ok(dev))
+ netif_carrier_off(dev);
+ }
+}
+
+static int veth_device_event(struct notifier_block *unused,
+ unsigned long event, void *ptr)
+{
+ struct net_device *dev = ptr;
+
+ if (dev->open != veth_open)
+ goto out;
+
+ switch (event) {
+ case NETDEV_CHANGE:
+ veth_change_state(dev);
+ break;
+ }
+out:
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block veth_notifier_block __read_mostly = {
+ .notifier_call = veth_device_event,
+};
+
/*
* netlink interface
*/
@@ -454,12 +479,14 @@
static __init int veth_init(void)
{
+ register_netdevice_notifier(&veth_notifier_block);
return rtnl_link_register(&veth_link_ops);
}
static __exit void veth_exit(void)
{
rtnl_link_unregister(&veth_link_ops);
+ unregister_netdevice_notifier(&veth_notifier_block);
}
module_init(veth_init);
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 7c851b1..8c9d6ae 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -1893,7 +1893,7 @@
/* Make sure we use pattern 0, 1 and not 4, 5 */
if (rp->quirks & rq6patterns)
- iowrite8(0x04, ioaddr + 0xA7);
+ iowrite8(0x04, ioaddr + WOLcgClr);
if (rp->wolopts & WAKE_MAGIC) {
iowrite8(WOLmagic, ioaddr + WOLcrSet);
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index fdc2367..19fd4cb 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -361,6 +361,7 @@
netif_napi_add(dev, &vi->napi, virtnet_poll, napi_weight);
vi->dev = dev;
vi->vdev = vdev;
+ vdev->priv = vi;
/* We expect two virtqueues, receive then send. */
vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done);
@@ -395,7 +396,6 @@
}
pr_debug("virtnet: registered device %s\n", dev->name);
- vdev->priv = vi;
return 0;
unregister:
diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h
index c79066b..69dea33 100644
--- a/drivers/net/wireless/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath5k/ath5k.h
@@ -1035,7 +1035,7 @@
unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
unsigned int, unsigned int, unsigned int, unsigned int,
unsigned int, unsigned int, unsigned int);
- bool (*ah_setup_xtx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+ int (*ah_setup_xtx_desc)(struct ath5k_hw *, struct ath5k_desc *,
unsigned int, unsigned int, unsigned int, unsigned int,
unsigned int, unsigned int);
int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *);
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index dfdaec0..bef967c 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -668,7 +668,10 @@
* return false w/o doing anything. MAC's that do
* support it will return true w/o doing anything.
*/
- if (ah->ah_setup_xtx_desc(ah, NULL, 0, 0, 0, 0, 0, 0))
+ ret = ah->ah_setup_xtx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
+ if (ret < 0)
+ goto err;
+ if (ret > 0)
__set_bit(ATH_STAT_MRRETRY, sc->status);
/*
@@ -1715,6 +1718,7 @@
break;
else if (unlikely(ret)) {
ATH5K_ERR(sc, "error in processing rx descriptor\n");
+ spin_unlock(&sc->rxbuflock);
return;
}
@@ -2126,8 +2130,9 @@
"updated timers based on beacon TSF\n");
ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
- "bc_tsf %llx hw_tsf %llx bc_tu %u hw_tu %u nexttbtt %u\n",
- bc_tsf, hw_tsf, bc_tu, hw_tu, nexttbtt);
+ "bc_tsf %llx hw_tsf %llx bc_tu %u hw_tu %u nexttbtt %u\n",
+ (unsigned long long) bc_tsf,
+ (unsigned long long) hw_tsf, bc_tu, hw_tu, nexttbtt);
ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "intval %u %s %s\n",
intval & AR5K_BEACON_PERIOD,
intval & AR5K_BEACON_ENA ? "AR5K_BEACON_ENA" : "",
@@ -2385,10 +2390,11 @@
u64 tsf = ath5k_hw_get_tsf64(ah);
sc->nexttbtt += sc->bintval;
ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
- "SWBA nexttbtt: %x hw_tu: %x "
- "TSF: %llx\n",
- sc->nexttbtt,
- TSF_TO_TU(tsf), tsf);
+ "SWBA nexttbtt: %x hw_tu: %x "
+ "TSF: %llx\n",
+ sc->nexttbtt,
+ TSF_TO_TU(tsf),
+ (unsigned long long) tsf);
} else {
ath5k_beacon_send(sc);
}
diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
index 1ab57aa..c2de2d9 100644
--- a/drivers/net/wireless/ath5k/hw.c
+++ b/drivers/net/wireless/ath5k/hw.c
@@ -45,7 +45,7 @@
unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
unsigned int, unsigned int, unsigned int, unsigned int, unsigned int,
unsigned int, unsigned int);
-static bool ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *, struct ath5k_desc *,
+static int ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *, struct ath5k_desc *,
unsigned int, unsigned int, unsigned int, unsigned int, unsigned int,
unsigned int);
static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *, struct ath5k_desc *);
@@ -3743,7 +3743,7 @@
/*
* Initialize a 4-word multirate tx descriptor on 5212
*/
-static bool
+static int
ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, u_int tx_tries2,
unsigned int tx_rate3, u_int tx_tries3)
@@ -3783,10 +3783,10 @@
#undef _XTX_TRIES
- return true;
+ return 1;
}
- return false;
+ return 0;
}
/*
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 1a2141d..8bc4bc4 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -32,6 +32,7 @@
bool
depends on B43 && SSB_PCIHOST_POSSIBLE
select SSB_PCIHOST
+ select SSB_B43_PCI_BRIDGE
default y
# Auto-select SSB PCICORE driver, if possible
diff --git a/drivers/net/wireless/b43legacy/Kconfig b/drivers/net/wireless/b43legacy/Kconfig
index 6745579..13c65fa 100644
--- a/drivers/net/wireless/b43legacy/Kconfig
+++ b/drivers/net/wireless/b43legacy/Kconfig
@@ -25,6 +25,7 @@
bool
depends on B43LEGACY && SSB_PCIHOST_POSSIBLE
select SSB_PCIHOST
+ select SSB_B43_PCI_BRIDGE
default y
# Auto-select SSB PCICORE driver, if possible
diff --git a/drivers/net/wireless/bcm43xx/Kconfig b/drivers/net/wireless/bcm43xx/Kconfig
index 0159701..afb8f43 100644
--- a/drivers/net/wireless/bcm43xx/Kconfig
+++ b/drivers/net/wireless/bcm43xx/Kconfig
@@ -1,6 +1,6 @@
config BCM43XX
tristate "Broadcom BCM43xx wireless support (DEPRECATED)"
- depends on PCI && IEEE80211 && IEEE80211_SOFTMAC && WLAN_80211 && EXPERIMENTAL
+ depends on PCI && IEEE80211 && IEEE80211_SOFTMAC && WLAN_80211 && (!SSB_B43_PCI_BRIDGE || SSB != y) && EXPERIMENTAL
select WIRELESS_EXT
select FW_LOADER
select HW_RANDOM
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index eab0203..b3c1acb 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1040,7 +1040,6 @@
lbs_deb_leave(LBS_DEB_CMD);
return ret;
}
-EXPORT_SYMBOL_GPL(lbs_mesh_access);
int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan)
{
@@ -1576,7 +1575,6 @@
lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret);
return ret;
}
-EXPORT_SYMBOL_GPL(lbs_prepare_and_send_command);
/**
* @brief This function allocates the command buffer and link
diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h
index aaacd9b..4e22341 100644
--- a/drivers/net/wireless/libertas/decl.h
+++ b/drivers/net/wireless/libertas/decl.h
@@ -69,7 +69,6 @@
int lbs_remove_card(struct lbs_private *priv);
int lbs_start_card(struct lbs_private *priv);
int lbs_stop_card(struct lbs_private *priv);
-int lbs_reset_device(struct lbs_private *priv);
void lbs_host_to_card_done(struct lbs_private *priv);
int lbs_update_channel(struct lbs_private *priv);
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 84fb49c..4d4e2f3 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -1351,8 +1351,6 @@
lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
return ret;
}
-EXPORT_SYMBOL_GPL(lbs_add_mesh);
-
static void lbs_remove_mesh(struct lbs_private *priv)
{
@@ -1372,7 +1370,6 @@
free_netdev(mesh_dev);
lbs_deb_leave(LBS_DEB_MESH);
}
-EXPORT_SYMBOL_GPL(lbs_remove_mesh);
/**
* @brief This function finds the CFP in
@@ -1458,20 +1455,6 @@
}
EXPORT_SYMBOL_GPL(lbs_interrupt);
-int lbs_reset_device(struct lbs_private *priv)
-{
- int ret;
-
- lbs_deb_enter(LBS_DEB_MAIN);
- ret = lbs_prepare_and_send_command(priv, CMD_802_11_RESET,
- CMD_ACT_HALT, 0, 0, NULL);
- msleep_interruptible(10);
-
- lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
- return ret;
-}
-EXPORT_SYMBOL_GPL(lbs_reset_device);
-
static int __init lbs_init_module(void)
{
lbs_deb_enter(LBS_DEB_MAIN);
diff --git a/drivers/net/wireless/p54usb.c b/drivers/net/wireless/p54usb.c
index 60d286e..e7d4aee 100644
--- a/drivers/net/wireless/p54usb.c
+++ b/drivers/net/wireless/p54usb.c
@@ -35,6 +35,7 @@
{USB_DEVICE(0x0707, 0xee06)}, /* SMC 2862W-G */
{USB_DEVICE(0x083a, 0x4501)}, /* Accton 802.11g WN4501 USB */
{USB_DEVICE(0x083a, 0x4502)}, /* Siemens Gigaset USB Adapter */
+ {USB_DEVICE(0x083a, 0x5501)}, /* Phillips CPWUA054 */
{USB_DEVICE(0x0846, 0x4200)}, /* Netgear WG121 */
{USB_DEVICE(0x0846, 0x4210)}, /* Netgear WG121 the second ? */
{USB_DEVICE(0x0846, 0x4220)}, /* Netgear WG111 */
@@ -62,6 +63,7 @@
{USB_DEVICE(0x0cde, 0x0008)}, /* Sagem XG703A */
{USB_DEVICE(0x0d8e, 0x3762)}, /* DLink DWL-G120 Cohiba */
{USB_DEVICE(0x09aa, 0x1000)}, /* Spinnaker Proto board */
+ {USB_DEVICE(0x13b1, 0x000a)}, /* Linksys WUSB54G ver 2 */
{USB_DEVICE(0x13B1, 0x000C)}, /* Linksys WUSB54AG */
{USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */
{USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 8ce2ddf..d9460ae 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -228,9 +228,9 @@
struct NDIS_802_11_SSID Ssid;
__le32 Privacy;
__le32 Rssi;
- enum NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;
+ __le32 NetworkTypeInUse;
struct NDIS_802_11_CONFIGURATION Configuration;
- enum NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode;
+ __le32 InfrastructureMode;
u8 SupportedRates[NDIS_802_11_LENGTH_RATES_EX];
__le32 IELength;
u8 IEs[0];
@@ -279,11 +279,11 @@
} __attribute__((packed));
/* these have to match what is in wpa_supplicant */
-enum { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP } wpa_alg;
-enum { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP, CIPHER_WEP104 }
- wpa_cipher;
-enum { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE, KEY_MGMT_802_1X_NO_WPA,
- KEY_MGMT_WPA_NONE } wpa_key_mgmt;
+enum wpa_alg { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP };
+enum wpa_cipher { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP,
+ CIPHER_WEP104 };
+enum wpa_key_mgmt { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE,
+ KEY_MGMT_802_1X_NO_WPA, KEY_MGMT_WPA_NONE };
/*
* private data
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index d6cba13..c69f85e 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -960,8 +960,12 @@
rt2400pci_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
+ case STATE_RADIO_RX_ON_LINK:
+ rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+ break;
case STATE_RADIO_RX_OFF:
- rt2400pci_toggle_rx(rt2x00dev, state);
+ case STATE_RADIO_RX_OFF_LINK:
+ rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
break;
case STATE_DEEP_SLEEP:
case STATE_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index e874fdc..91e87b5 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1112,8 +1112,12 @@
rt2500pci_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
+ case STATE_RADIO_RX_ON_LINK:
+ rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+ break;
case STATE_RADIO_RX_OFF:
- rt2500pci_toggle_rx(rt2x00dev, state);
+ case STATE_RADIO_RX_OFF_LINK:
+ rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
break;
case STATE_DEEP_SLEEP:
case STATE_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 4ca9730..638c3d2 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1001,8 +1001,12 @@
rt2500usb_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
+ case STATE_RADIO_RX_ON_LINK:
+ rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+ break;
case STATE_RADIO_RX_OFF:
- rt2500usb_toggle_rx(rt2x00dev, state);
+ case STATE_RADIO_RX_OFF_LINK:
+ rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
break;
case STATE_DEEP_SLEEP:
case STATE_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 72cfe00..07adc57 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -97,12 +97,16 @@
libconf.ant.rx = rx;
libconf.ant.tx = tx;
+ if (rx == rt2x00dev->link.ant.active.rx &&
+ tx == rt2x00dev->link.ant.active.tx)
+ return;
+
/*
* Antenna setup changes require the RX to be disabled,
* else the changes will be ignored by the device.
*/
if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
- rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
+ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK);
/*
* Write new antenna setup to device and reset the link tuner.
@@ -116,7 +120,7 @@
rt2x00dev->link.ant.active.tx = libconf.ant.tx;
if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
- rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK);
}
void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index c4be2ac4..0d51f478 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -61,11 +61,33 @@
/*
* Link tuning handlers
*/
-static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev)
+void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev)
{
+ if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ return;
+
+ /*
+ * Reset link information.
+ * Both the currently active vgc level as well as
+ * the link tuner counter should be reset. Resetting
+ * the counter is important for devices where the
+ * device should only perform link tuning during the
+ * first minute after being enabled.
+ */
rt2x00dev->link.count = 0;
rt2x00dev->link.vgc_level = 0;
+ /*
+ * Reset the link tuner.
+ */
+ rt2x00dev->ops->lib->reset_tuner(rt2x00dev);
+}
+
+static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev)
+{
+ /*
+ * Clear all (possibly) pre-existing quality statistics.
+ */
memset(&rt2x00dev->link.qual, 0, sizeof(rt2x00dev->link.qual));
/*
@@ -79,10 +101,7 @@
rt2x00dev->link.qual.rx_percentage = 50;
rt2x00dev->link.qual.tx_percentage = 50;
- /*
- * Reset the link tuner.
- */
- rt2x00dev->ops->lib->reset_tuner(rt2x00dev);
+ rt2x00lib_reset_link_tuner(rt2x00dev);
queue_delayed_work(rt2x00dev->hw->workqueue,
&rt2x00dev->link.work, LINK_TUNE_INTERVAL);
@@ -93,15 +112,6 @@
cancel_delayed_work_sync(&rt2x00dev->link.work);
}
-void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev)
-{
- if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
- return;
-
- rt2x00lib_stop_link_tuner(rt2x00dev);
- rt2x00lib_start_link_tuner(rt2x00dev);
-}
-
/*
* Ring initialization
*/
@@ -260,19 +270,11 @@
if (sample_a == sample_b)
return;
- if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) {
- if (sample_a > sample_b && rx == ANTENNA_B)
- rx = ANTENNA_A;
- else if (rx == ANTENNA_A)
- rx = ANTENNA_B;
- }
+ if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY)
+ rx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B;
- if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY) {
- if (sample_a > sample_b && tx == ANTENNA_B)
- tx = ANTENNA_A;
- else if (tx == ANTENNA_A)
- tx = ANTENNA_B;
- }
+ if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)
+ tx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B;
rt2x00lib_config_antenna(rt2x00dev, rx, tx);
}
@@ -293,7 +295,7 @@
* sample the rssi from the other antenna to make a valid
* comparison between the 2 antennas.
*/
- if ((rssi_curr - rssi_old) > -5 || (rssi_curr - rssi_old) < 5)
+ if (abs(rssi_curr - rssi_old) < 5)
return;
rt2x00dev->link.ant.flags |= ANTENNA_MODE_SAMPLE;
@@ -319,15 +321,15 @@
rt2x00dev->link.ant.flags &= ~ANTENNA_TX_DIVERSITY;
if (rt2x00dev->hw->conf.antenna_sel_rx == 0 &&
- rt2x00dev->default_ant.rx != ANTENNA_SW_DIVERSITY)
+ rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
rt2x00dev->link.ant.flags |= ANTENNA_RX_DIVERSITY;
if (rt2x00dev->hw->conf.antenna_sel_tx == 0 &&
- rt2x00dev->default_ant.tx != ANTENNA_SW_DIVERSITY)
+ rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
rt2x00dev->link.ant.flags |= ANTENNA_TX_DIVERSITY;
if (!(rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) &&
!(rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)) {
- rt2x00dev->link.ant.flags &= ~ANTENNA_MODE_SAMPLE;
+ rt2x00dev->link.ant.flags = 0;
return;
}
@@ -441,17 +443,18 @@
rt2x00dev->ops->lib->link_tuner(rt2x00dev);
/*
- * Evaluate antenna setup.
- */
- rt2x00lib_evaluate_antenna(rt2x00dev);
-
- /*
* Precalculate a portion of the link signal which is
* in based on the tx/rx success/failure counters.
*/
rt2x00lib_precalculate_link_signal(&rt2x00dev->link.qual);
/*
+ * Evaluate antenna setup, make this the last step since this could
+ * possibly reset some statistics.
+ */
+ rt2x00lib_evaluate_antenna(rt2x00dev);
+
+ /*
* Increase tuner counter, and reschedule the next link tuner run.
*/
rt2x00dev->link.count++;
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index 8384212..b1915dc7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -85,6 +85,8 @@
STATE_RADIO_OFF,
STATE_RADIO_RX_ON,
STATE_RADIO_RX_OFF,
+ STATE_RADIO_RX_ON_LINK,
+ STATE_RADIO_RX_OFF_LINK,
STATE_RADIO_IRQ_ON,
STATE_RADIO_IRQ_OFF,
};
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index b31f0c2..e808db9 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1482,8 +1482,12 @@
rt61pci_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
+ case STATE_RADIO_RX_ON_LINK:
+ rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+ break;
case STATE_RADIO_RX_OFF:
- rt61pci_toggle_rx(rt2x00dev, state);
+ case STATE_RADIO_RX_OFF_LINK:
+ rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
break;
case STATE_DEEP_SLEEP:
case STATE_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 4d576ab..4fac2d4 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1208,8 +1208,12 @@
rt73usb_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
+ case STATE_RADIO_RX_ON_LINK:
+ rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+ break;
case STATE_RADIO_RX_OFF:
- rt73usb_toggle_rx(rt2x00dev, state);
+ case STATE_RADIO_RX_OFF_LINK:
+ rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
break;
case STATE_DEEP_SLEEP:
case STATE_SLEEP:
diff --git a/drivers/net/wireless/rtl8180_dev.c b/drivers/net/wireless/rtl8180_dev.c
index 27ebd68..5e9a8ac 100644
--- a/drivers/net/wireless/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl8180_dev.c
@@ -135,13 +135,15 @@
while (skb_queue_len(&ring->queue)) {
struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
struct sk_buff *skb;
- struct ieee80211_tx_status status = { {0} };
+ struct ieee80211_tx_status status;
struct ieee80211_tx_control *control;
u32 flags = le32_to_cpu(entry->flags);
if (flags & RTL8180_TX_DESC_FLAG_OWN)
return;
+ memset(&status, 0, sizeof(status));
+
ring->idx = (ring->idx + 1) % ring->entries;
skb = __skb_dequeue(&ring->queue);
pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index 0d71716..f445059 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -113,10 +113,12 @@
static void rtl8187_tx_cb(struct urb *urb)
{
- struct ieee80211_tx_status status = { {0} };
+ struct ieee80211_tx_status status;
struct sk_buff *skb = (struct sk_buff *)urb->context;
struct rtl8187_tx_info *info = (struct rtl8187_tx_info *)skb->cb;
+ memset(&status, 0, sizeof(status));
+
usb_free_urb(info->urb);
if (info->control)
memcpy(&status.control, info->control, sizeof(status.control));
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 49127e4..76ef2d8 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -360,11 +360,14 @@
{
struct sk_buff_head *q = &zd_hw_mac(hw)->ack_wait_queue;
struct sk_buff *skb;
- struct ieee80211_tx_status status = {{0}};
+ struct ieee80211_tx_status status;
skb = skb_dequeue(q);
if (skb == NULL)
return;
+
+ memset(&status, 0, sizeof(status));
+
tx_status(hw, skb, &status, 0);
}
@@ -389,7 +392,8 @@
if (unlikely(error ||
(cb->control->flags & IEEE80211_TXCTL_NO_ACK)))
{
- struct ieee80211_tx_status status = {{0}};
+ struct ieee80211_tx_status status;
+ memset(&status, 0, sizeof(status));
tx_status(hw, skb, &status, !error);
} else {
struct sk_buff_head *q =
@@ -603,7 +607,9 @@
tx_hdr = (struct ieee80211_hdr *)skb->data;
if (likely(!compare_ether_addr(tx_hdr->addr2, rx_hdr->addr1)))
{
- struct ieee80211_tx_status status = {{0}};
+ struct ieee80211_tx_status status;
+
+ memset(&status, 0, sizeof(status));
status.flags = IEEE80211_TX_STATUS_ACK;
status.ack_signal = stats->ssi;
__skb_unlink(skb, q);
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index c307621..d8a5c22 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -1851,8 +1851,7 @@
}
}
/* See how many write buffers are required to hold this data */
- numBuffers= ( skb->len + privptr->p_env->write_size - 1) /
- ( privptr->p_env->write_size);
+ numBuffers = DIV_ROUND_UP(skb->len, privptr->p_env->write_size);
/* If that number of buffers isn't available, give up for now */
if (privptr->write_free_count < numBuffers ||
@@ -2114,8 +2113,7 @@
*/
ccw_blocks_perpage= PAGE_SIZE / CCWBK_SIZE;
ccw_pages_required=
- (ccw_blocks_required+ccw_blocks_perpage -1) /
- ccw_blocks_perpage;
+ DIV_ROUND_UP(ccw_blocks_required, ccw_blocks_perpage);
#ifdef DEBUGMSG
printk(KERN_INFO "%s: %s() > ccw_blocks_perpage=%d\n",
@@ -2131,30 +2129,29 @@
* provide good performance. With packing buffers support 32k
* buffers are used.
*/
- if (privptr->p_env->read_size < PAGE_SIZE) {
- claw_reads_perpage= PAGE_SIZE / privptr->p_env->read_size;
- claw_read_pages= (privptr->p_env->read_buffers +
- claw_reads_perpage -1) / claw_reads_perpage;
+ if (privptr->p_env->read_size < PAGE_SIZE) {
+ claw_reads_perpage = PAGE_SIZE / privptr->p_env->read_size;
+ claw_read_pages = DIV_ROUND_UP(privptr->p_env->read_buffers,
+ claw_reads_perpage);
}
else { /* > or equal */
- privptr->p_buff_pages_perread=
- (privptr->p_env->read_size + PAGE_SIZE - 1) / PAGE_SIZE;
- claw_read_pages=
- privptr->p_env->read_buffers * privptr->p_buff_pages_perread;
+ privptr->p_buff_pages_perread =
+ DIV_ROUND_UP(privptr->p_env->read_size, PAGE_SIZE);
+ claw_read_pages = privptr->p_env->read_buffers *
+ privptr->p_buff_pages_perread;
}
if (privptr->p_env->write_size < PAGE_SIZE) {
- claw_writes_perpage=
- PAGE_SIZE / privptr->p_env->write_size;
- claw_write_pages=
- (privptr->p_env->write_buffers + claw_writes_perpage -1) /
- claw_writes_perpage;
+ claw_writes_perpage =
+ PAGE_SIZE / privptr->p_env->write_size;
+ claw_write_pages = DIV_ROUND_UP(privptr->p_env->write_buffers,
+ claw_writes_perpage);
}
else { /* > or equal */
- privptr->p_buff_pages_perwrite=
- (privptr->p_env->read_size + PAGE_SIZE - 1) / PAGE_SIZE;
- claw_write_pages=
- privptr->p_env->write_buffers * privptr->p_buff_pages_perwrite;
+ privptr->p_buff_pages_perwrite =
+ DIV_ROUND_UP(privptr->p_env->read_size, PAGE_SIZE);
+ claw_write_pages = privptr->p_env->write_buffers *
+ privptr->p_buff_pages_perwrite;
}
#ifdef DEBUGMSG
if (privptr->p_env->read_size < PAGE_SIZE) {
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index b82595c..cf627cd 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -686,7 +686,7 @@
config SERIAL_BFIN_UART1
bool "Enable UART1"
- depends on SERIAL_BFIN && (BF534 || BF536 || BF537 || BF54x)
+ depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561)
help
Enable UART1
@@ -699,14 +699,14 @@
config UART1_CTS_PIN
int "UART1 CTS pin"
- depends on BFIN_UART1_CTSRTS && (BF53x || BF561)
+ depends on BFIN_UART1_CTSRTS && !BF54x
default -1
help
Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
config UART1_RTS_PIN
int "UART1 RTS pin"
- depends on BFIN_UART1_CTSRTS && (BF53x || BF561)
+ depends on BFIN_UART1_CTSRTS && !BF54x
default -1
help
Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index ac2a3ef..0aa345b 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -1,30 +1,11 @@
/*
- * File: drivers/serial/bfin_5xx.c
- * Based on: Based on drivers/serial/sa1100.c
- * Author: Aubrey Li <aubrey.li@analog.com>
+ * Blackfin On-Chip Serial Driver
*
- * Created:
- * Description: Driver for blackfin 5xx serial ports
+ * Copyright 2006-2007 Analog Devices Inc.
*
- * Modified:
- * Copyright 2006 Analog Devices Inc.
+ * Enter bugs at http://blackfin.uclinux.org/
*
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#if defined(CONFIG_SERIAL_BFIN_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -67,14 +48,12 @@
#define DMA_RX_XCOUNT 512
#define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT)
-#define DMA_RX_FLUSH_JIFFIES 5
+#define DMA_RX_FLUSH_JIFFIES (HZ / 50)
#ifdef CONFIG_SERIAL_BFIN_DMA
static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart);
#else
-static void bfin_serial_do_work(struct work_struct *work);
static void bfin_serial_tx_chars(struct bfin_serial_port *uart);
-static void local_put_char(struct bfin_serial_port *uart, char ch);
#endif
static void bfin_serial_mctrl_check(struct bfin_serial_port *uart);
@@ -85,23 +64,26 @@
static void bfin_serial_stop_tx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+ struct circ_buf *xmit = &uart->port.info->xmit;
+#if !defined(CONFIG_BF54x) && !defined(CONFIG_SERIAL_BFIN_DMA)
+ unsigned short ier;
+#endif
while (!(UART_GET_LSR(uart) & TEMT))
- continue;
+ cpu_relax();
#ifdef CONFIG_SERIAL_BFIN_DMA
disable_dma(uart->tx_dma_channel);
+ xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
+ uart->port.icount.tx += uart->tx_count;
+ uart->tx_count = 0;
+ uart->tx_done = 1;
#else
#ifdef CONFIG_BF54x
- /* Waiting for Transmission Finished */
- while (!(UART_GET_LSR(uart) & TFI))
- continue;
/* Clear TFI bit */
UART_PUT_LSR(uart, TFI);
UART_CLEAR_IER(uart, ETBEI);
#else
- unsigned short ier;
-
ier = UART_GET_IER(uart);
ier &= ~ETBEI;
UART_PUT_IER(uart, ier);
@@ -117,7 +99,8 @@
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
#ifdef CONFIG_SERIAL_BFIN_DMA
- bfin_serial_dma_tx_chars(uart);
+ if (uart->tx_done)
+ bfin_serial_dma_tx_chars(uart);
#else
#ifdef CONFIG_BF54x
UART_SET_IER(uart, ETBEI);
@@ -209,34 +192,27 @@
}
#endif
+#if ANOMALY_05000230 && defined(CONFIG_SERIAL_BFIN_PIO)
+# define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold)
+# define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v))
+#else
+# define UART_GET_ANOMALY_THRESHOLD(uart) 0
+# define UART_SET_ANOMALY_THRESHOLD(uart, v)
+#endif
+
#ifdef CONFIG_SERIAL_BFIN_PIO
-static void local_put_char(struct bfin_serial_port *uart, char ch)
-{
- unsigned short status;
- int flags = 0;
-
- spin_lock_irqsave(&uart->port.lock, flags);
-
- do {
- status = UART_GET_LSR(uart);
- } while (!(status & THRE));
-
- UART_PUT_CHAR(uart, ch);
- SSYNC();
-
- spin_unlock_irqrestore(&uart->port.lock, flags);
-}
-
static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
{
struct tty_struct *tty = uart->port.info->tty;
unsigned int status, ch, flg;
- static int in_break = 0;
+ static struct timeval anomaly_start = { .tv_sec = 0 };
#ifdef CONFIG_KGDB_UART
struct pt_regs *regs = get_irq_regs();
#endif
status = UART_GET_LSR(uart);
+ UART_CLEAR_LSR(uart);
+
ch = UART_GET_CHAR(uart);
uart->port.icount.rx++;
@@ -262,28 +238,56 @@
#endif
if (ANOMALY_05000230) {
- /* The BF533 family of processors have a nice misbehavior where
- * they continuously generate characters for a "single" break.
+ /* The BF533 (and BF561) family of processors have a nice anomaly
+ * where they continuously generate characters for a "single" break.
* We have to basically ignore this flood until the "next" valid
- * character comes across. All other Blackfin families operate
- * properly though.
+ * character comes across. Due to the nature of the flood, it is
+ * not possible to reliably catch bytes that are sent too quickly
+ * after this break. So application code talking to the Blackfin
+ * which sends a break signal must allow at least 1.5 character
+ * times after the end of the break for things to stabilize. This
+ * timeout was picked as it must absolutely be larger than 1
+ * character time +/- some percent. So 1.5 sounds good. All other
+ * Blackfin families operate properly. Woo.
* Note: While Anomaly 05000230 does not directly address this,
* the changes that went in for it also fixed this issue.
+ * That anomaly was fixed in 0.5+ silicon. I like bunnies.
*/
- if (in_break) {
- if (ch != 0) {
- in_break = 0;
- ch = UART_GET_CHAR(uart);
- if (bfin_revid() < 5)
- return;
- } else
- return;
+ if (anomaly_start.tv_sec) {
+ struct timeval curr;
+ suseconds_t usecs;
+
+ if ((~ch & (~ch + 1)) & 0xff)
+ goto known_good_char;
+
+ do_gettimeofday(&curr);
+ if (curr.tv_sec - anomaly_start.tv_sec > 1)
+ goto known_good_char;
+
+ usecs = 0;
+ if (curr.tv_sec != anomaly_start.tv_sec)
+ usecs += USEC_PER_SEC;
+ usecs += curr.tv_usec - anomaly_start.tv_usec;
+
+ if (usecs > UART_GET_ANOMALY_THRESHOLD(uart))
+ goto known_good_char;
+
+ if (ch)
+ anomaly_start.tv_sec = 0;
+ else
+ anomaly_start = curr;
+
+ return;
+
+ known_good_char:
+ anomaly_start.tv_sec = 0;
}
}
if (status & BI) {
if (ANOMALY_05000230)
- in_break = 1;
+ if (bfin_revid() < 5)
+ do_gettimeofday(&anomaly_start);
uart->port.icount.brk++;
if (uart_handle_break(&uart->port))
goto ignore_char;
@@ -324,7 +328,6 @@
UART_PUT_CHAR(uart, uart->port.x_char);
uart->port.icount.tx++;
uart->port.x_char = 0;
- return;
}
/*
* Check the modem control lines before
@@ -337,9 +340,12 @@
return;
}
- local_put_char(uart, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- uart->port.icount.tx++;
+ while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) {
+ UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ uart->port.icount.tx++;
+ SSYNC();
+ }
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&uart->port);
@@ -352,21 +358,11 @@
{
struct bfin_serial_port *uart = dev_id;
-#ifdef CONFIG_BF54x
- unsigned short status;
spin_lock(&uart->port.lock);
- status = UART_GET_LSR(uart);
- while ((UART_GET_IER(uart) & ERBFI) && (status & DR)) {
- bfin_serial_rx_chars(uart);
- status = UART_GET_LSR(uart);
- }
- spin_unlock(&uart->port.lock);
-#else
- spin_lock(&uart->port.lock);
- while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_RX_READY)
+ while (UART_GET_LSR(uart) & DR)
bfin_serial_rx_chars(uart);
spin_unlock(&uart->port.lock);
-#endif
+
return IRQ_HANDLED;
}
@@ -374,25 +370,16 @@
{
struct bfin_serial_port *uart = dev_id;
-#ifdef CONFIG_BF54x
- unsigned short status;
spin_lock(&uart->port.lock);
- status = UART_GET_LSR(uart);
- while ((UART_GET_IER(uart) & ETBEI) && (status & THRE)) {
- bfin_serial_tx_chars(uart);
- status = UART_GET_LSR(uart);
- }
- spin_unlock(&uart->port.lock);
-#else
- spin_lock(&uart->port.lock);
- while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_TX_READY)
+ if (UART_GET_LSR(uart) & THRE)
bfin_serial_tx_chars(uart);
spin_unlock(&uart->port.lock);
-#endif
+
return IRQ_HANDLED;
}
+#endif
-
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
static void bfin_serial_do_work(struct work_struct *work)
{
struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue);
@@ -406,33 +393,27 @@
{
struct circ_buf *xmit = &uart->port.info->xmit;
unsigned short ier;
- int flags = 0;
-
- if (!uart->tx_done)
- return;
uart->tx_done = 0;
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
+ uart->tx_count = 0;
+ uart->tx_done = 1;
+ return;
+ }
+
if (uart->port.x_char) {
UART_PUT_CHAR(uart, uart->port.x_char);
uart->port.icount.tx++;
uart->port.x_char = 0;
- uart->tx_done = 1;
- return;
}
+
/*
* Check the modem control lines before
* transmitting anything.
*/
bfin_serial_mctrl_check(uart);
- if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
- bfin_serial_stop_tx(&uart->port);
- uart->tx_done = 1;
- return;
- }
-
- spin_lock_irqsave(&uart->port.lock, flags);
uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE);
if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail))
uart->tx_count = UART_XMIT_SIZE - xmit->tail;
@@ -448,6 +429,7 @@
set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
set_dma_x_modify(uart->tx_dma_channel, 1);
enable_dma(uart->tx_dma_channel);
+
#ifdef CONFIG_BF54x
UART_SET_IER(uart, ETBEI);
#else
@@ -455,7 +437,6 @@
ier |= ETBEI;
UART_PUT_IER(uart, ier);
#endif
- spin_unlock_irqrestore(&uart->port.lock, flags);
}
static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
@@ -464,7 +445,11 @@
int i, flg, status;
status = UART_GET_LSR(uart);
- uart->port.icount.rx += CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, UART_XMIT_SIZE);;
+ UART_CLEAR_LSR(uart);
+
+ uart->port.icount.rx +=
+ CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail,
+ UART_XMIT_SIZE);
if (status & BI) {
uart->port.icount.brk++;
@@ -490,10 +475,12 @@
else
flg = TTY_NORMAL;
- for (i = uart->rx_dma_buf.head; i < uart->rx_dma_buf.tail; i++) {
- if (uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i]))
- goto dma_ignore_char;
- uart_insert_char(&uart->port, status, OE, uart->rx_dma_buf.buf[i], flg);
+ for (i = uart->rx_dma_buf.tail; i != uart->rx_dma_buf.head; i++) {
+ if (i >= UART_XMIT_SIZE)
+ i = 0;
+ if (!uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i]))
+ uart_insert_char(&uart->port, status, OE,
+ uart->rx_dma_buf.buf[i], flg);
}
dma_ignore_char:
@@ -503,23 +490,23 @@
void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
{
int x_pos, pos;
- int flags = 0;
- bfin_serial_dma_tx_chars(uart);
-
- spin_lock_irqsave(&uart->port.lock, flags);
- x_pos = DMA_RX_XCOUNT - get_dma_curr_xcount(uart->rx_dma_channel);
+ uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel);
+ x_pos = get_dma_curr_xcount(uart->rx_dma_channel);
+ uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows;
+ if (uart->rx_dma_nrows == DMA_RX_YCOUNT)
+ uart->rx_dma_nrows = 0;
+ x_pos = DMA_RX_XCOUNT - x_pos;
if (x_pos == DMA_RX_XCOUNT)
x_pos = 0;
pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos;
-
- if (pos>uart->rx_dma_buf.tail) {
- uart->rx_dma_buf.tail = pos;
+ if (pos != uart->rx_dma_buf.tail) {
+ uart->rx_dma_buf.head = pos;
bfin_serial_dma_rx_chars(uart);
- uart->rx_dma_buf.head = uart->rx_dma_buf.tail;
+ uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
}
- spin_unlock_irqrestore(&uart->port.lock, flags);
+
uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
add_timer(&(uart->rx_dma_timer));
}
@@ -532,8 +519,8 @@
spin_lock(&uart->port.lock);
if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
- clear_dma_irqstat(uart->tx_dma_channel);
disable_dma(uart->tx_dma_channel);
+ clear_dma_irqstat(uart->tx_dma_channel);
#ifdef CONFIG_BF54x
UART_CLEAR_IER(uart, ETBEI);
#else
@@ -541,15 +528,13 @@
ier &= ~ETBEI;
UART_PUT_IER(uart, ier);
#endif
- xmit->tail = (xmit->tail+uart->tx_count) &(UART_XMIT_SIZE -1);
- uart->port.icount.tx+=uart->tx_count;
+ xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
+ uart->port.icount.tx += uart->tx_count;
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&uart->port);
- if (uart_circ_empty(xmit))
- bfin_serial_stop_tx(&uart->port);
- uart->tx_done = 1;
+ bfin_serial_dma_tx_chars(uart);
}
spin_unlock(&uart->port.lock);
@@ -561,18 +546,15 @@
struct bfin_serial_port *uart = dev_id;
unsigned short irqstat;
- uart->rx_dma_nrows++;
- if (uart->rx_dma_nrows == DMA_RX_YCOUNT) {
- uart->rx_dma_nrows = 0;
- uart->rx_dma_buf.tail = DMA_RX_XCOUNT*DMA_RX_YCOUNT;
- bfin_serial_dma_rx_chars(uart);
- uart->rx_dma_buf.head = uart->rx_dma_buf.tail = 0;
- }
spin_lock(&uart->port.lock);
irqstat = get_dma_curr_irqstat(uart->rx_dma_channel);
clear_dma_irqstat(uart->rx_dma_channel);
-
spin_unlock(&uart->port.lock);
+
+ del_timer(&(uart->rx_dma_timer));
+ uart->rx_dma_timer.expires = jiffies;
+ add_timer(&(uart->rx_dma_timer));
+
return IRQ_HANDLED;
}
#endif
@@ -599,7 +581,11 @@
if (uart->cts_pin < 0)
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+# ifdef BF54x
+ if (UART_GET_MSR(uart) & CTS)
+# else
if (gpio_get_value(uart->cts_pin))
+# endif
return TIOCM_DSR | TIOCM_CAR;
else
#endif
@@ -614,9 +600,17 @@
return;
if (mctrl & TIOCM_RTS)
+# ifdef BF54x
+ UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS);
+# else
gpio_set_value(uart->rts_pin, 0);
+# endif
else
+# ifdef BF54x
+ UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS);
+# else
gpio_set_value(uart->rts_pin, 1);
+# endif
#endif
}
@@ -627,22 +621,17 @@
{
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
unsigned int status;
-# ifdef CONFIG_SERIAL_BFIN_DMA
struct uart_info *info = uart->port.info;
struct tty_struct *tty = info->tty;
status = bfin_serial_get_mctrl(&uart->port);
+ uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
if (!(status & TIOCM_CTS)) {
tty->hw_stopped = 1;
+ schedule_work(&uart->cts_workqueue);
} else {
tty->hw_stopped = 0;
}
-# else
- status = bfin_serial_get_mctrl(&uart->port);
- uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
- if (!(status & TIOCM_CTS))
- schedule_work(&uart->cts_workqueue);
-# endif
#endif
}
@@ -743,6 +732,7 @@
disable_dma(uart->rx_dma_channel);
free_dma(uart->rx_dma_channel);
del_timer(&(uart->rx_dma_timer));
+ dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0);
#else
#ifdef CONFIG_KGDB_UART
if (uart->port.line != CONFIG_KGDB_UART_PORT)
@@ -814,6 +804,8 @@
quot = uart_get_divisor(port, baud);
spin_lock_irqsave(&uart->port.lock, flags);
+ UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15);
+
do {
lsr = UART_GET_LSR(uart);
} while (!(lsr & TEMT));
@@ -956,10 +948,9 @@
bfin_serial_ports[i].rx_dma_channel =
bfin_serial_resource[i].uart_rx_dma_channel;
init_timer(&(bfin_serial_ports[i].rx_dma_timer));
-#else
- INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work);
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work);
bfin_serial_ports[i].cts_pin =
bfin_serial_resource[i].uart_cts_pin;
bfin_serial_ports[i].rts_pin =
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 9ce12cb..a8c116b 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -41,6 +41,7 @@
#include <linux/delay.h>
#include <linux/console.h>
#include <linux/platform_device.h>
+#include <linux/serial_sci.h>
#ifdef CONFIG_CPU_FREQ
#include <linux/notifier.h>
@@ -54,7 +55,6 @@
#include <asm/kgdb.h>
#endif
-#include <asm/sci.h>
#include "sh-sci.h"
struct sci_port {
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index 9cfcfd8..617efb1 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -1,7 +1,7 @@
/*
* Core maple bus functionality
*
- * Copyright (C) 2007 Adrian McMenamin
+ * Copyright (C) 2007, 2008 Adrian McMenamin
*
* Based on 2.4 code by:
*
@@ -18,7 +18,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/device.h>
-#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/io.h>
@@ -54,7 +53,7 @@
static int subdevice_map[MAPLE_PORTS];
static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr;
static unsigned long maple_pnp_time;
-static int started, scanning, liststatus, realscan;
+static int started, scanning, liststatus, fullscan;
static struct kmem_cache *maple_queue_cache;
struct maple_device_specify {
@@ -62,6 +61,9 @@
int unit;
};
+static bool checked[4];
+static struct maple_device *baseunits[4];
+
/**
* maple_driver_register - register a device driver
* automatically makes the driver bus a maple bus
@@ -309,11 +311,9 @@
else
break;
- if (realscan) {
- printk(KERN_INFO "Maple device detected: %s\n",
- mdev->product_name);
- printk(KERN_INFO "Maple device: %s\n", mdev->product_licence);
- }
+ printk(KERN_INFO "Maple device detected: %s\n",
+ mdev->product_name);
+ printk(KERN_INFO "Maple device: %s\n", mdev->product_licence);
function = be32_to_cpu(mdev->devinfo.function);
@@ -323,10 +323,9 @@
mdev->driver = &maple_dummy_driver;
sprintf(mdev->dev.bus_id, "%d:0.port", mdev->port);
} else {
- if (realscan)
- printk(KERN_INFO
- "Maple bus at (%d, %d): Function 0x%lX\n",
- mdev->port, mdev->unit, function);
+ printk(KERN_INFO
+ "Maple bus at (%d, %d): Function 0x%lX\n",
+ mdev->port, mdev->unit, function);
matched =
bus_for_each_drv(&maple_bus_type, NULL, mdev,
@@ -334,9 +333,8 @@
if (matched == 0) {
/* Driver does not exist yet */
- if (realscan)
- printk(KERN_INFO
- "No maple driver found.\n");
+ printk(KERN_INFO
+ "No maple driver found.\n");
mdev->driver = &maple_dummy_driver;
}
sprintf(mdev->dev.bus_id, "%d:0%d.%lX", mdev->port,
@@ -472,9 +470,12 @@
maple_detach_driver(mdev);
return;
}
- if (!started) {
- printk(KERN_INFO "No maple devices attached to port %d\n",
- mdev->port);
+ if (!started || !fullscan) {
+ if (checked[mdev->port] == false) {
+ checked[mdev->port] = true;
+ printk(KERN_INFO "No maple devices attached"
+ " to port %d\n", mdev->port);
+ }
return;
}
maple_clean_submap(mdev);
@@ -485,8 +486,14 @@
char *recvbuf)
{
char submask;
- if ((!started) || (scanning == 2)) {
- maple_attach_driver(mdev);
+ if (!started || (scanning == 2) || !fullscan) {
+ if ((mdev->unit == 0) && (checked[mdev->port] == false)) {
+ checked[mdev->port] = true;
+ maple_attach_driver(mdev);
+ } else {
+ if (mdev->unit != 0)
+ maple_attach_driver(mdev);
+ }
return;
}
if (mdev->unit == 0) {
@@ -505,6 +512,7 @@
struct maple_device *dev;
char *recvbuf;
enum maple_code code;
+ int i;
if (!maple_dma_done())
return;
@@ -557,6 +565,19 @@
} else
scanning = 0;
+ if (!fullscan) {
+ fullscan = 1;
+ for (i = 0; i < MAPLE_PORTS; i++) {
+ if (checked[i] == false) {
+ fullscan = 0;
+ dev = baseunits[i];
+ dev->mq->command =
+ MAPLE_COMMAND_DEVINFO;
+ dev->mq->length = 0;
+ maple_add_packet(dev->mq);
+ }
+ }
+ }
if (started == 0)
started = 1;
}
@@ -694,7 +715,9 @@
/* setup maple ports */
for (i = 0; i < MAPLE_PORTS; i++) {
+ checked[i] = false;
mdev[i] = maple_alloc_dev(i, 0);
+ baseunits[i] = mdev[i];
if (!mdev[i]) {
while (i-- > 0)
maple_free_dev(mdev[i]);
@@ -703,12 +726,9 @@
mdev[i]->mq->command = MAPLE_COMMAND_DEVINFO;
mdev[i]->mq->length = 0;
maple_add_packet(mdev[i]->mq);
- /* delay aids hardware detection */
- mdelay(5);
subdevice_map[i] = 0;
}
- realscan = 1;
/* setup maplebus hardware */
maplebus_dma_reset();
/* initial detection */
diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index d976660c..adea792 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -35,6 +35,11 @@
If unsure, say Y
+config SSB_B43_PCI_BRIDGE
+ bool
+ depends on SSB_PCIHOST
+ default n
+
config SSB_PCMCIAHOST_POSSIBLE
bool
depends on SSB && (PCMCIA = y || PCMCIA = SSB) && EXPERIMENTAL
@@ -105,6 +110,12 @@
If unsure, say N
+# Assumption: We are on embedded, if we compile the MIPS core.
+config SSB_EMBEDDED
+ bool
+ depends on SSB_DRIVER_MIPS
+ default y
+
config SSB_DRIVER_EXTIF
bool "SSB Broadcom EXTIF core driver (EXPERIMENTAL)"
depends on SSB_DRIVER_MIPS && EXPERIMENTAL
diff --git a/drivers/ssb/Makefile b/drivers/ssb/Makefile
index 7be3975..de94c2e 100644
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -1,5 +1,6 @@
# core
ssb-y += main.o scan.o
+ssb-$(CONFIG_SSB_EMBEDDED) += embedded.o
# host support
ssb-$(CONFIG_SSB_PCIHOST) += pci.o pcihost_wrapper.o
@@ -13,6 +14,6 @@
# b43 pci-ssb-bridge driver
# Not strictly a part of SSB, but kept here for convenience
-ssb-$(CONFIG_SSB_PCIHOST) += b43_pci_bridge.o
+ssb-$(CONFIG_SSB_B43_PCI_BRIDGE) += b43_pci_bridge.o
obj-$(CONFIG_SSB) += ssb.o
diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c
index 6fbf1c5..e586321 100644
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -39,12 +39,14 @@
ssb_write32(cc->dev, offset, value);
}
-static inline void chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
- u32 mask, u32 value)
+static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
+ u32 mask, u32 value)
{
value &= mask;
value |= chipco_read32(cc, offset) & ~mask;
chipco_write32(cc, offset, value);
+
+ return value;
}
void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
@@ -356,14 +358,29 @@
return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask;
}
-void ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
+u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
{
- chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
}
-void ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
+u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
{
- chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
+}
+
+u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value)
+{
+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
+}
+
+u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
+{
+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
+}
+
+u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value)
+{
+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
}
#ifdef CONFIG_SSB_SERIAL
@@ -376,6 +393,7 @@
unsigned int irq;
u32 baud_base, div;
u32 i, n;
+ unsigned int ccrev = cc->dev->id.revision;
plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
irq = ssb_mips_irq(cc->dev);
@@ -387,14 +405,39 @@
chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
div = 1;
} else {
- if (cc->dev->id.revision >= 11) {
- /* Fixed ALP clock */
- baud_base = 20000000;
- div = 1;
+ if (ccrev == 20) {
+ /* BCM5354 uses constant 25MHz clock */
+ baud_base = 25000000;
+ div = 48;
/* Set the override bit so we don't divide it */
chipco_write32(cc, SSB_CHIPCO_CORECTL,
- SSB_CHIPCO_CORECTL_UARTCLK0);
- } else if (cc->dev->id.revision >= 3) {
+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
+ | SSB_CHIPCO_CORECTL_UARTCLK0);
+ } else if ((ccrev >= 11) && (ccrev != 15)) {
+ /* Fixed ALP clock */
+ baud_base = 20000000;
+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
+ /* FIXME: baud_base is different for devices with a PMU */
+ SSB_WARN_ON(1);
+ }
+ div = 1;
+ if (ccrev >= 21) {
+ /* Turn off UART clock before switching clocksource. */
+ chipco_write32(cc, SSB_CHIPCO_CORECTL,
+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
+ & ~SSB_CHIPCO_CORECTL_UARTCLKEN);
+ }
+ /* Set the override bit so we don't divide it */
+ chipco_write32(cc, SSB_CHIPCO_CORECTL,
+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
+ | SSB_CHIPCO_CORECTL_UARTCLK0);
+ if (ccrev >= 21) {
+ /* Re-enable the UART clock. */
+ chipco_write32(cc, SSB_CHIPCO_CORECTL,
+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
+ | SSB_CHIPCO_CORECTL_UARTCLKEN);
+ }
+ } else if (ccrev >= 3) {
/* Internal backplane clock */
baud_base = ssb_clockspeed(bus);
div = chipco_read32(cc, SSB_CHIPCO_CLKDIV)
@@ -406,7 +449,7 @@
}
/* Clock source depends on strapping if UartClkOverride is unset */
- if ((cc->dev->id.revision > 0) &&
+ if ((ccrev > 0) &&
!(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) {
if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) ==
SSB_CHIPCO_CAP_UARTCLK_INT) {
@@ -428,7 +471,7 @@
cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE);
uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA;
/* Offset changed at after rev 0 */
- if (cc->dev->id.revision == 0)
+ if (ccrev == 0)
uart_regs += (i * 8);
else
uart_regs += (i * 256);
diff --git a/drivers/ssb/driver_extif.c b/drivers/ssb/driver_extif.c
index fe55eb8..c3e1d3e6 100644
--- a/drivers/ssb/driver_extif.c
+++ b/drivers/ssb/driver_extif.c
@@ -27,12 +27,14 @@
ssb_write32(extif->dev, offset, value);
}
-static inline void extif_write32_masked(struct ssb_extif *extif, u16 offset,
- u32 mask, u32 value)
+static inline u32 extif_write32_masked(struct ssb_extif *extif, u16 offset,
+ u32 mask, u32 value)
{
value &= mask;
value |= extif_read32(extif, offset) & ~mask;
extif_write32(extif, offset, value);
+
+ return value;
}
#ifdef CONFIG_SSB_SERIAL
@@ -110,20 +112,35 @@
*m = extif_read32(extif, SSB_EXTIF_CLOCK_SB);
}
+void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
+ u32 ticks)
+{
+ extif_write32(extif, SSB_EXTIF_WATCHDOG, ticks);
+}
+
u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask)
{
return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask;
}
-void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
+u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
{
return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
mask, value);
}
-void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
+u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
{
return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
mask, value);
}
+u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value)
+{
+ return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value);
+}
+
+u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value)
+{
+ return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value);
+}
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 2faaa90..07ab48d 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -11,6 +11,7 @@
#include <linux/ssb/ssb.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/ssb/ssb_embedded.h>
#include "ssb_private.h"
@@ -27,6 +28,18 @@
ssb_write32(pc->dev, offset, value);
}
+static inline
+u16 pcicore_read16(struct ssb_pcicore *pc, u16 offset)
+{
+ return ssb_read16(pc->dev, offset);
+}
+
+static inline
+void pcicore_write16(struct ssb_pcicore *pc, u16 offset, u16 value)
+{
+ ssb_write16(pc->dev, offset, value);
+}
+
/**************************************************
* Code for hostmode operation.
**************************************************/
@@ -66,6 +79,7 @@
base = &ssb_pcicore_pcibus_iobase;
else
base = &ssb_pcicore_pcibus_membase;
+ res->flags |= IORESOURCE_PCI_FIXED;
if (res->end) {
size = res->end - res->start + 1;
if (*base & (size - 1))
@@ -88,10 +102,12 @@
static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
{
+ u8 lat;
+
if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
return;
- ssb_printk(KERN_INFO "PCI: fixing up bridge\n");
+ ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
/* Enable PCI bridge bus mastering and memory space */
pci_set_master(dev);
@@ -101,7 +117,10 @@
pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
/* Make sure our latency is high enough to handle the devices behind us */
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xa8);
+ lat = 168;
+ ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
+ pci_name(dev), lat);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}
DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
@@ -117,8 +136,10 @@
u32 addr = 0;
u32 tmp;
- if (unlikely(pc->cardbusmode && dev > 1))
+ /* We do only have one cardbus device behind the bridge. */
+ if (pc->cardbusmode && (dev >= 1))
goto out;
+
if (bus == 0) {
/* Type 0 transaction */
if (unlikely(dev >= SSB_PCI_SLOT_MAX))
@@ -279,14 +300,14 @@
.name = "SSB PCIcore external memory",
.start = SSB_PCI_DMA,
.end = SSB_PCI_DMA + SSB_PCI_DMA_SZ - 1,
- .flags = IORESOURCE_MEM,
+ .flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED,
};
static struct resource ssb_pcicore_io_resource = {
.name = "SSB PCIcore external I/O",
.start = 0x100,
.end = 0x7FF,
- .flags = IORESOURCE_IO,
+ .flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED,
};
static struct pci_controller ssb_pcicore_controller = {
@@ -318,7 +339,16 @@
pcicore_write32(pc, SSB_PCICORE_ARBCTL, val);
udelay(1); /* Assertion time demanded by the PCI standard */
- /*TODO cardbus mode */
+ if (pc->dev->bus->has_cardbus_slot) {
+ ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
+ pc->cardbusmode = 1;
+ /* GPIO 1 resets the bridge */
+ ssb_gpio_out(pc->dev->bus, 1, 1);
+ ssb_gpio_outen(pc->dev->bus, 1, 1);
+ pcicore_write16(pc, SSB_PCICORE_SPROM(0),
+ pcicore_read16(pc, SSB_PCICORE_SPROM(0))
+ | 0x0400);
+ }
/* 64MB I/O window */
pcicore_write32(pc, SSB_PCICORE_SBTOPCI0,
@@ -344,7 +374,8 @@
/* Ok, ready to run, register it to the system.
* The following needs change, if we want to port hostmode
* to non-MIPS platform. */
- set_io_port_base((unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000));
+ ssb_pcicore_controller.io_map_base = (unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000);
+ set_io_port_base(ssb_pcicore_controller.io_map_base);
/* Give some time to the PCI controller to configure itself with the new
* values. Not waiting at this point causes crashes of the machine. */
mdelay(10);
@@ -362,7 +393,7 @@
chipid_top != 0x5300)
return 0;
- if (bus->sprom.r1.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
+ if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
return 0;
/* The 200-pin BCM4712 package does not bond out PCI. Even when
diff --git a/drivers/ssb/embedded.c b/drivers/ssb/embedded.c
new file mode 100644
index 0000000..d3ade82
--- /dev/null
+++ b/drivers/ssb/embedded.c
@@ -0,0 +1,132 @@
+/*
+ * Sonics Silicon Backplane
+ * Embedded systems support code
+ *
+ * Copyright 2005-2008, Broadcom Corporation
+ * Copyright 2006-2008, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_embedded.h>
+
+#include "ssb_private.h"
+
+
+int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks)
+{
+ if (ssb_chipco_available(&bus->chipco)) {
+ ssb_chipco_watchdog_timer_set(&bus->chipco, ticks);
+ return 0;
+ }
+ if (ssb_extif_available(&bus->extif)) {
+ ssb_extif_watchdog_timer_set(&bus->extif, ticks);
+ return 0;
+ }
+ return -ENODEV;
+}
+
+u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&bus->gpio_lock, flags);
+ if (ssb_chipco_available(&bus->chipco))
+ res = ssb_chipco_gpio_in(&bus->chipco, mask);
+ else if (ssb_extif_available(&bus->extif))
+ res = ssb_extif_gpio_in(&bus->extif, mask);
+ else
+ SSB_WARN_ON(1);
+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(ssb_gpio_in);
+
+u32 ssb_gpio_out(struct ssb_bus *bus, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&bus->gpio_lock, flags);
+ if (ssb_chipco_available(&bus->chipco))
+ res = ssb_chipco_gpio_out(&bus->chipco, mask, value);
+ else if (ssb_extif_available(&bus->extif))
+ res = ssb_extif_gpio_out(&bus->extif, mask, value);
+ else
+ SSB_WARN_ON(1);
+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(ssb_gpio_out);
+
+u32 ssb_gpio_outen(struct ssb_bus *bus, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&bus->gpio_lock, flags);
+ if (ssb_chipco_available(&bus->chipco))
+ res = ssb_chipco_gpio_outen(&bus->chipco, mask, value);
+ else if (ssb_extif_available(&bus->extif))
+ res = ssb_extif_gpio_outen(&bus->extif, mask, value);
+ else
+ SSB_WARN_ON(1);
+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(ssb_gpio_outen);
+
+u32 ssb_gpio_control(struct ssb_bus *bus, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&bus->gpio_lock, flags);
+ if (ssb_chipco_available(&bus->chipco))
+ res = ssb_chipco_gpio_control(&bus->chipco, mask, value);
+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(ssb_gpio_control);
+
+u32 ssb_gpio_intmask(struct ssb_bus *bus, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&bus->gpio_lock, flags);
+ if (ssb_chipco_available(&bus->chipco))
+ res = ssb_chipco_gpio_intmask(&bus->chipco, mask, value);
+ else if (ssb_extif_available(&bus->extif))
+ res = ssb_extif_gpio_intmask(&bus->extif, mask, value);
+ else
+ SSB_WARN_ON(1);
+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(ssb_gpio_intmask);
+
+u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&bus->gpio_lock, flags);
+ if (ssb_chipco_available(&bus->chipco))
+ res = ssb_chipco_gpio_polarity(&bus->chipco, mask, value);
+ else if (ssb_extif_available(&bus->extif))
+ res = ssb_extif_gpio_polarity(&bus->extif, mask, value);
+ else
+ SSB_WARN_ON(1);
+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(ssb_gpio_polarity);
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 9028ed5..bedb2b4 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -557,6 +557,7 @@
goto out;
memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo));
memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom));
+ bus->has_cardbus_slot = iv.has_cardbus_slot;
out:
return err;
}
@@ -569,6 +570,9 @@
spin_lock_init(&bus->bar_lock);
INIT_LIST_HEAD(&bus->list);
+#ifdef CONFIG_SSB_EMBEDDED
+ spin_lock_init(&bus->gpio_lock);
+#endif
/* Powerup the bus */
err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h
index a789364..21eca2b 100644
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -120,10 +120,10 @@
extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
/* b43_pci_bridge.c */
-#ifdef CONFIG_SSB_PCIHOST
+#ifdef CONFIG_SSB_B43_PCI_BRIDGE
extern int __init b43_pci_ssb_bridge_init(void);
extern void __exit b43_pci_ssb_bridge_exit(void);
-#else /* CONFIG_SSB_PCIHOST */
+#else /* CONFIG_SSB_B43_PCI_BRIDGR */
static inline int b43_pci_ssb_bridge_init(void)
{
return 0;
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 6fca069..3033d69 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -3213,7 +3213,7 @@
dev_err(&u132->platform_dev->dev, "device is being removed\n");
return -ESHUTDOWN;
} else {
- int retval = 0;
+ int retval = 0, ports;
switch (state.event) {
case PM_EVENT_FREEZE:
@@ -3221,7 +3221,7 @@
break;
case PM_EVENT_SUSPEND:
case PM_EVENT_HIBERNATE:
- int ports = MAX_U132_PORTS;
+ ports = MAX_U132_PORTS;
while (ports-- > 0) {
port_power(u132, ports, 0);
}
diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c
index 33888bb..2c23bad 100644
--- a/fs/ext4/dir.c
+++ b/fs/ext4/dir.c
@@ -46,7 +46,7 @@
#ifdef CONFIG_COMPAT
.compat_ioctl = ext4_compat_ioctl,
#endif
- .fsync = ext4_sync_file, /* BKL held */
+ .fsync = ext4_sync_file,
.release = ext4_release_dir,
};
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index bc7081f..9ae6e67 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -148,6 +148,7 @@
{
struct ext4_inode_info *ei = EXT4_I(inode);
ext4_fsblk_t bg_start;
+ ext4_fsblk_t last_block;
ext4_grpblk_t colour;
int depth;
@@ -169,8 +170,13 @@
/* OK. use inode's group */
bg_start = (ei->i_block_group * EXT4_BLOCKS_PER_GROUP(inode->i_sb)) +
le32_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_first_data_block);
- colour = (current->pid % 16) *
+ last_block = ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es) - 1;
+
+ if (bg_start + EXT4_BLOCKS_PER_GROUP(inode->i_sb) <= last_block)
+ colour = (current->pid % 16) *
(EXT4_BLOCKS_PER_GROUP(inode->i_sb) / 16);
+ else
+ colour = (current->pid % 16) * ((last_block - bg_start) / 16);
return bg_start + colour + block;
}
@@ -349,7 +355,7 @@
#define ext4_ext_show_leaf(inode,path)
#endif
-static void ext4_ext_drop_refs(struct ext4_ext_path *path)
+void ext4_ext_drop_refs(struct ext4_ext_path *path)
{
int depth = path->p_depth;
int i;
@@ -2168,6 +2174,10 @@
newblock = iblock - ee_block + ext_pblock(ex);
ex2 = ex;
+ err = ext4_ext_get_access(handle, inode, path + depth);
+ if (err)
+ goto out;
+
/* ex1: ee_block to iblock - 1 : uninitialized */
if (iblock > ee_block) {
ex1 = ex;
@@ -2200,16 +2210,20 @@
newdepth = ext_depth(inode);
if (newdepth != depth) {
depth = newdepth;
- path = ext4_ext_find_extent(inode, iblock, NULL);
+ ext4_ext_drop_refs(path);
+ path = ext4_ext_find_extent(inode, iblock, path);
if (IS_ERR(path)) {
err = PTR_ERR(path);
- path = NULL;
goto out;
}
eh = path[depth].p_hdr;
ex = path[depth].p_ext;
if (ex2 != &newex)
ex2 = ex;
+
+ err = ext4_ext_get_access(handle, inode, path + depth);
+ if (err)
+ goto out;
}
allocated = max_blocks;
}
@@ -2230,9 +2244,6 @@
ex2->ee_len = cpu_to_le16(allocated);
if (ex2 != ex)
goto insert;
- err = ext4_ext_get_access(handle, inode, path + depth);
- if (err)
- goto out;
/*
* New (initialized) extent starts from the first block
* in the current extent. i.e., ex2 == ex
@@ -2276,9 +2287,22 @@
}
/*
+ * Block allocation/map/preallocation routine for extents based files
+ *
+ *
* Need to be called with
* down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system block
* (ie, create is zero). Otherwise down_write(&EXT4_I(inode)->i_data_sem)
+ *
+ * return > 0, number of of blocks already mapped/allocated
+ * if create == 0 and these are pre-allocated blocks
+ * buffer head is unmapped
+ * otherwise blocks are mapped
+ *
+ * return = 0, if plain look up failed (blocks have not been allocated)
+ * buffer head is unmapped
+ *
+ * return < 0, error case.
*/
int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
ext4_lblk_t iblock,
@@ -2623,7 +2647,7 @@
* modify 1 super block, 1 block bitmap and 1 group descriptor.
*/
credits = EXT4_DATA_TRANS_BLOCKS(inode->i_sb) + 3;
- down_write((&EXT4_I(inode)->i_data_sem));
+ mutex_lock(&inode->i_mutex);
retry:
while (ret >= 0 && ret < max_blocks) {
block = block + ret;
@@ -2634,16 +2658,17 @@
break;
}
- ret = ext4_ext_get_blocks(handle, inode, block,
+ ret = ext4_get_blocks_wrap(handle, inode, block,
max_blocks, &map_bh,
EXT4_CREATE_UNINITIALIZED_EXT, 0);
- WARN_ON(ret <= 0);
if (ret <= 0) {
- ext4_error(inode->i_sb, "ext4_fallocate",
- "ext4_ext_get_blocks returned error: "
- "inode#%lu, block=%u, max_blocks=%lu",
+#ifdef EXT4FS_DEBUG
+ WARN_ON(ret <= 0);
+ printk(KERN_ERR "%s: ext4_ext_get_blocks "
+ "returned error inode#%lu, block=%u, "
+ "max_blocks=%lu", __func__,
inode->i_ino, block, max_blocks);
- ret = -EIO;
+#endif
ext4_mark_inode_dirty(handle, inode);
ret2 = ext4_journal_stop(handle);
break;
@@ -2680,7 +2705,6 @@
if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
goto retry;
- up_write((&EXT4_I(inode)->i_data_sem));
/*
* Time to update the file size.
* Update only when preallocation was requested beyond the file size.
@@ -2692,21 +2716,18 @@
* if no error, we assume preallocation succeeded
* completely
*/
- mutex_lock(&inode->i_mutex);
i_size_write(inode, offset + len);
EXT4_I(inode)->i_disksize = i_size_read(inode);
- mutex_unlock(&inode->i_mutex);
} else if (ret < 0 && nblocks) {
/* Handle partial allocation scenario */
loff_t newsize;
- mutex_lock(&inode->i_mutex);
newsize = (nblocks << blkbits) + i_size_read(inode);
i_size_write(inode, EXT4_BLOCK_ALIGN(newsize, blkbits));
EXT4_I(inode)->i_disksize = i_size_read(inode);
- mutex_unlock(&inode->i_mutex);
}
}
+ mutex_unlock(&inode->i_mutex);
return ret > 0 ? ret2 : ret;
}
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index da18a74..8036b9b 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -702,7 +702,12 @@
ei->i_dir_start_lookup = 0;
ei->i_disksize = 0;
- ei->i_flags = EXT4_I(dir)->i_flags & ~EXT4_INDEX_FL;
+ /*
+ * Don't inherit extent flag from directory. We set extent flag on
+ * newly created directory and file only if -o extent mount option is
+ * specified
+ */
+ ei->i_flags = EXT4_I(dir)->i_flags & ~(EXT4_INDEX_FL|EXT4_EXTENTS_FL);
if (S_ISLNK(mode))
ei->i_flags &= ~(EXT4_IMMUTABLE_FL|EXT4_APPEND_FL);
/* dirsync only applies to directories */
@@ -745,12 +750,15 @@
goto fail_free_drop;
}
if (test_opt(sb, EXTENTS)) {
- EXT4_I(inode)->i_flags |= EXT4_EXTENTS_FL;
- ext4_ext_tree_init(handle, inode);
- err = ext4_update_incompat_feature(handle, sb,
- EXT4_FEATURE_INCOMPAT_EXTENTS);
- if (err)
- goto fail;
+ /* set extent flag only for directory and file */
+ if (S_ISDIR(mode) || S_ISREG(mode)) {
+ EXT4_I(inode)->i_flags |= EXT4_EXTENTS_FL;
+ ext4_ext_tree_init(handle, inode);
+ err = ext4_update_incompat_feature(handle, sb,
+ EXT4_FEATURE_INCOMPAT_EXTENTS);
+ if (err)
+ goto fail;
+ }
}
ext4_debug("allocating inode %lu\n", inode->i_ino);
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 7dd9b50..945cbf6 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -403,6 +403,7 @@
__le32 *start = ind->bh ? (__le32*) ind->bh->b_data : ei->i_data;
__le32 *p;
ext4_fsblk_t bg_start;
+ ext4_fsblk_t last_block;
ext4_grpblk_t colour;
/* Try to find previous block */
@@ -420,8 +421,13 @@
* into the same cylinder group then.
*/
bg_start = ext4_group_first_block_no(inode->i_sb, ei->i_block_group);
- colour = (current->pid % 16) *
+ last_block = ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es) - 1;
+
+ if (bg_start + EXT4_BLOCKS_PER_GROUP(inode->i_sb) <= last_block)
+ colour = (current->pid % 16) *
(EXT4_BLOCKS_PER_GROUP(inode->i_sb) / 16);
+ else
+ colour = (current->pid % 16) * ((last_block - bg_start) / 16);
return bg_start + colour;
}
@@ -768,7 +774,6 @@
*
* `handle' can be NULL if create == 0.
*
- * The BKL may not be held on entry here. Be sure to take it early.
* return > 0, # of blocks mapped or allocated.
* return = 0, if plain lookup failed.
* return < 0, error case.
@@ -903,11 +908,38 @@
*/
#define DIO_CREDITS 25
+
+/*
+ *
+ *
+ * ext4_ext4 get_block() wrapper function
+ * It will do a look up first, and returns if the blocks already mapped.
+ * Otherwise it takes the write lock of the i_data_sem and allocate blocks
+ * and store the allocated blocks in the result buffer head and mark it
+ * mapped.
+ *
+ * If file type is extents based, it will call ext4_ext_get_blocks(),
+ * Otherwise, call with ext4_get_blocks_handle() to handle indirect mapping
+ * based files
+ *
+ * On success, it returns the number of blocks being mapped or allocate.
+ * if create==0 and the blocks are pre-allocated and uninitialized block,
+ * the result buffer head is unmapped. If the create ==1, it will make sure
+ * the buffer head is mapped.
+ *
+ * It returns 0 if plain look up failed (blocks have not been allocated), in
+ * that casem, buffer head is unmapped
+ *
+ * It returns the error in case of allocation failure.
+ */
int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block,
unsigned long max_blocks, struct buffer_head *bh,
int create, int extend_disksize)
{
int retval;
+
+ clear_buffer_mapped(bh);
+
/*
* Try to see if we can get the block without requesting
* for new file system block.
@@ -921,12 +953,26 @@
inode, block, max_blocks, bh, 0, 0);
}
up_read((&EXT4_I(inode)->i_data_sem));
- if (!create || (retval > 0))
+
+ /* If it is only a block(s) look up */
+ if (!create)
return retval;
/*
- * We need to allocate new blocks which will result
- * in i_data update
+ * Returns if the blocks have already allocated
+ *
+ * Note that if blocks have been preallocated
+ * ext4_ext_get_block() returns th create = 0
+ * with buffer head unmapped.
+ */
+ if (retval > 0 && buffer_mapped(bh))
+ return retval;
+
+ /*
+ * New blocks allocate and/or writing to uninitialized extent
+ * will possibly result in updating i_data, so we take
+ * the write lock of i_data_sem, and call get_blocks()
+ * with create == 1 flag.
*/
down_write((&EXT4_I(inode)->i_data_sem));
/*
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index dd0fcfc..ef97f19 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -627,21 +627,19 @@
return block;
}
+static inline void *mb_correct_addr_and_bit(int *bit, void *addr)
+{
#if BITS_PER_LONG == 64
-#define mb_correct_addr_and_bit(bit, addr) \
-{ \
- bit += ((unsigned long) addr & 7UL) << 3; \
- addr = (void *) ((unsigned long) addr & ~7UL); \
-}
+ *bit += ((unsigned long) addr & 7UL) << 3;
+ addr = (void *) ((unsigned long) addr & ~7UL);
#elif BITS_PER_LONG == 32
-#define mb_correct_addr_and_bit(bit, addr) \
-{ \
- bit += ((unsigned long) addr & 3UL) << 3; \
- addr = (void *) ((unsigned long) addr & ~3UL); \
-}
+ *bit += ((unsigned long) addr & 3UL) << 3;
+ addr = (void *) ((unsigned long) addr & ~3UL);
#else
#error "how many bits you are?!"
#endif
+ return addr;
+}
static inline int mb_test_bit(int bit, void *addr)
{
@@ -649,34 +647,54 @@
* ext4_test_bit on architecture like powerpc
* needs unsigned long aligned address
*/
- mb_correct_addr_and_bit(bit, addr);
+ addr = mb_correct_addr_and_bit(&bit, addr);
return ext4_test_bit(bit, addr);
}
static inline void mb_set_bit(int bit, void *addr)
{
- mb_correct_addr_and_bit(bit, addr);
+ addr = mb_correct_addr_and_bit(&bit, addr);
ext4_set_bit(bit, addr);
}
static inline void mb_set_bit_atomic(spinlock_t *lock, int bit, void *addr)
{
- mb_correct_addr_and_bit(bit, addr);
+ addr = mb_correct_addr_and_bit(&bit, addr);
ext4_set_bit_atomic(lock, bit, addr);
}
static inline void mb_clear_bit(int bit, void *addr)
{
- mb_correct_addr_and_bit(bit, addr);
+ addr = mb_correct_addr_and_bit(&bit, addr);
ext4_clear_bit(bit, addr);
}
static inline void mb_clear_bit_atomic(spinlock_t *lock, int bit, void *addr)
{
- mb_correct_addr_and_bit(bit, addr);
+ addr = mb_correct_addr_and_bit(&bit, addr);
ext4_clear_bit_atomic(lock, bit, addr);
}
+static inline int mb_find_next_zero_bit(void *addr, int max, int start)
+{
+ int fix = 0;
+ addr = mb_correct_addr_and_bit(&fix, addr);
+ max += fix;
+ start += fix;
+
+ return ext4_find_next_zero_bit(addr, max, start) - fix;
+}
+
+static inline int mb_find_next_bit(void *addr, int max, int start)
+{
+ int fix = 0;
+ addr = mb_correct_addr_and_bit(&fix, addr);
+ max += fix;
+ start += fix;
+
+ return ext4_find_next_bit(addr, max, start) - fix;
+}
+
static void *mb_find_buddy(struct ext4_buddy *e4b, int order, int *max)
{
char *bb;
@@ -906,7 +924,7 @@
unsigned short chunk;
unsigned short border;
- BUG_ON(len >= EXT4_BLOCKS_PER_GROUP(sb));
+ BUG_ON(len > EXT4_BLOCKS_PER_GROUP(sb));
border = 2 << sb->s_blocksize_bits;
@@ -946,12 +964,12 @@
/* initialize buddy from bitmap which is aggregation
* of on-disk bitmap and preallocations */
- i = ext4_find_next_zero_bit(bitmap, max, 0);
+ i = mb_find_next_zero_bit(bitmap, max, 0);
grp->bb_first_free = i;
while (i < max) {
fragments++;
first = i;
- i = ext4_find_next_bit(bitmap, max, i);
+ i = mb_find_next_bit(bitmap, max, i);
len = i - first;
free += len;
if (len > 1)
@@ -959,7 +977,7 @@
else
grp->bb_counters[0]++;
if (i < max)
- i = ext4_find_next_zero_bit(bitmap, max, i);
+ i = mb_find_next_zero_bit(bitmap, max, i);
}
grp->bb_fragments = fragments;
@@ -967,6 +985,10 @@
ext4_error(sb, __FUNCTION__,
"EXT4-fs: group %lu: %u blocks in bitmap, %u in gd\n",
group, free, grp->bb_free);
+ /*
+ * If we intent to continue, we consider group descritor
+ * corrupt and update bb_free using bitmap value
+ */
grp->bb_free = free;
}
@@ -1778,7 +1800,7 @@
buddy = mb_find_buddy(e4b, i, &max);
BUG_ON(buddy == NULL);
- k = ext4_find_next_zero_bit(buddy, max, 0);
+ k = mb_find_next_zero_bit(buddy, max, 0);
BUG_ON(k >= max);
ac->ac_found++;
@@ -1818,11 +1840,11 @@
i = e4b->bd_info->bb_first_free;
while (free && ac->ac_status == AC_STATUS_CONTINUE) {
- i = ext4_find_next_zero_bit(bitmap,
+ i = mb_find_next_zero_bit(bitmap,
EXT4_BLOCKS_PER_GROUP(sb), i);
if (i >= EXT4_BLOCKS_PER_GROUP(sb)) {
/*
- * IF we corrupt the bitmap we won't find any
+ * IF we have corrupt bitmap, we won't find any
* free blocks even though group info says we
* we have free blocks
*/
@@ -1838,6 +1860,12 @@
ext4_error(sb, __FUNCTION__, "%d free blocks as per "
"group info. But got %d blocks\n",
free, ex.fe_len);
+ /*
+ * The number of free blocks differs. This mostly
+ * indicate that the bitmap is corrupt. So exit
+ * without claiming the space.
+ */
+ break;
}
ext4_mb_measure_extent(ac, &ex, e4b);
@@ -3740,10 +3768,10 @@
}
while (bit < end) {
- bit = ext4_find_next_zero_bit(bitmap_bh->b_data, end, bit);
+ bit = mb_find_next_zero_bit(bitmap_bh->b_data, end, bit);
if (bit >= end)
break;
- next = ext4_find_next_bit(bitmap_bh->b_data, end, bit);
+ next = mb_find_next_bit(bitmap_bh->b_data, end, bit);
if (next > end)
next = end;
start = group * EXT4_BLOCKS_PER_GROUP(sb) + bit +
@@ -3771,6 +3799,10 @@
(unsigned long) pa->pa_len);
ext4_error(sb, __FUNCTION__, "free %u, pa_free %u\n",
free, pa->pa_free);
+ /*
+ * pa is already deleted so we use the value obtained
+ * from the bitmap and continue.
+ */
}
atomic_add(free, &sbi->s_mb_discarded);
if (ac)
diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index 8c6c685..5c1e27d 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -43,6 +43,7 @@
if (IS_ERR(path)) {
retval = PTR_ERR(path);
+ path = NULL;
goto err_out;
}
@@ -74,6 +75,10 @@
}
retval = ext4_ext_insert_extent(handle, inode, path, &newext);
err_out:
+ if (path) {
+ ext4_ext_drop_refs(path);
+ kfree(path);
+ }
lb->first_pblock = 0;
return retval;
}
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index a9347fb..28aa2ed 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1804,12 +1804,8 @@
inode->i_fop = &ext4_dir_operations;
inode->i_size = EXT4_I(inode)->i_disksize = inode->i_sb->s_blocksize;
dir_block = ext4_bread (handle, inode, 0, 1, &err);
- if (!dir_block) {
- ext4_dec_count(handle, inode); /* is this nlink == 0? */
- ext4_mark_inode_dirty(handle, inode);
- iput (inode);
- goto out_stop;
- }
+ if (!dir_block)
+ goto out_clear_inode;
BUFFER_TRACE(dir_block, "get_write_access");
ext4_journal_get_write_access(handle, dir_block);
de = (struct ext4_dir_entry_2 *) dir_block->b_data;
@@ -1832,7 +1828,8 @@
ext4_mark_inode_dirty(handle, inode);
err = ext4_add_entry (handle, dentry, inode);
if (err) {
- inode->i_nlink = 0;
+out_clear_inode:
+ clear_nlink(inode);
ext4_mark_inode_dirty(handle, inode);
iput (inode);
goto out_stop;
@@ -2164,7 +2161,7 @@
dir->i_ctime = dir->i_mtime = ext4_current_time(dir);
ext4_update_dx_flag(dir);
ext4_mark_inode_dirty(handle, dir);
- ext4_dec_count(handle, inode);
+ drop_nlink(inode);
if (!inode->i_nlink)
ext4_orphan_add(handle, inode);
inode->i_ctime = ext4_current_time(inode);
@@ -2214,7 +2211,7 @@
err = __page_symlink(inode, symname, l,
mapping_gfp_mask(inode->i_mapping) & ~__GFP_FS);
if (err) {
- ext4_dec_count(handle, inode);
+ clear_nlink(inode);
ext4_mark_inode_dirty(handle, inode);
iput (inode);
goto out_stop;
@@ -2223,7 +2220,6 @@
inode->i_op = &ext4_fast_symlink_inode_operations;
memcpy((char*)&EXT4_I(inode)->i_data,symname,l);
inode->i_size = l-1;
- EXT4_I(inode)->i_flags &= ~EXT4_EXTENTS_FL;
}
EXT4_I(inode)->i_disksize = inode->i_size;
err = ext4_add_nondir(handle, dentry, inode);
@@ -2407,7 +2403,7 @@
ext4_dec_count(handle, old_dir);
if (new_inode) {
/* checked empty_dir above, can't have another parent,
- * ext3_dec_count() won't work for many-linked dirs */
+ * ext4_dec_count() won't work for many-linked dirs */
new_inode->i_nlink = 0;
} else {
ext4_inc_count(handle, new_dir);
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 9477a2b..e29efa0 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -1037,6 +1037,7 @@
ext4_warning(sb, __FUNCTION__,
"multiple resizers run on filesystem!");
unlock_super(sb);
+ ext4_journal_stop(handle);
err = -EBUSY;
goto exit_put;
}
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 96ee899..91a1bd6 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -314,9 +314,12 @@
static int lstats_show_proc(struct seq_file *m, void *v)
{
int i;
- struct task_struct *task = m->private;
- seq_puts(m, "Latency Top version : v0.1\n");
+ struct inode *inode = m->private;
+ struct task_struct *task = get_proc_task(inode);
+ if (!task)
+ return -ESRCH;
+ seq_puts(m, "Latency Top version : v0.1\n");
for (i = 0; i < 32; i++) {
if (task->latency_record[i].backtrace[0]) {
int q;
@@ -341,32 +344,24 @@
}
}
+ put_task_struct(task);
return 0;
}
static int lstats_open(struct inode *inode, struct file *file)
{
- int ret;
- struct seq_file *m;
- struct task_struct *task = get_proc_task(inode);
-
- ret = single_open(file, lstats_show_proc, NULL);
- if (!ret) {
- m = file->private_data;
- m->private = task;
- }
- return ret;
+ return single_open(file, lstats_show_proc, inode);
}
static ssize_t lstats_write(struct file *file, const char __user *buf,
size_t count, loff_t *offs)
{
- struct seq_file *m;
- struct task_struct *task;
+ struct task_struct *task = get_proc_task(file->f_dentry->d_inode);
- m = file->private_data;
- task = m->private;
+ if (!task)
+ return -ESRCH;
clear_all_latency_tracing(task);
+ put_task_struct(task);
return count;
}
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 21dfc9d..8831d95 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -171,7 +171,7 @@
char *this_char, *value, *eov;
int dsunit, dswidth, vol_dsunit, vol_dswidth;
int iosize;
- int ikeep = 0;
+ int dmapi_implies_ikeep = 1;
args->flags |= XFSMNT_BARRIER;
args->flags2 |= XFSMNT2_COMPAT_IOSIZE;
@@ -302,10 +302,10 @@
} else if (!strcmp(this_char, MNTOPT_NOBARRIER)) {
args->flags &= ~XFSMNT_BARRIER;
} else if (!strcmp(this_char, MNTOPT_IKEEP)) {
- ikeep = 1;
- args->flags &= ~XFSMNT_IDELETE;
+ args->flags |= XFSMNT_IKEEP;
} else if (!strcmp(this_char, MNTOPT_NOIKEEP)) {
- args->flags |= XFSMNT_IDELETE;
+ dmapi_implies_ikeep = 0;
+ args->flags &= ~XFSMNT_IKEEP;
} else if (!strcmp(this_char, MNTOPT_LARGEIO)) {
args->flags2 &= ~XFSMNT2_COMPAT_IOSIZE;
} else if (!strcmp(this_char, MNTOPT_NOLARGEIO)) {
@@ -410,8 +410,8 @@
* Note that if "ikeep" or "noikeep" mount options are
* supplied, then they are honored.
*/
- if (!(args->flags & XFSMNT_DMAPI) && !ikeep)
- args->flags |= XFSMNT_IDELETE;
+ if ((args->flags & XFSMNT_DMAPI) && dmapi_implies_ikeep)
+ args->flags |= XFSMNT_IKEEP;
if ((args->flags & XFSMNT_NOALIGN) != XFSMNT_NOALIGN) {
if (dsunit) {
@@ -446,6 +446,7 @@
{
static struct proc_xfs_info xfs_info_set[] = {
/* the few simple ones we can get from the mount struct */
+ { XFS_MOUNT_IKEEP, "," MNTOPT_IKEEP },
{ XFS_MOUNT_WSYNC, "," MNTOPT_WSYNC },
{ XFS_MOUNT_INO64, "," MNTOPT_INO64 },
{ XFS_MOUNT_NOALIGN, "," MNTOPT_NOALIGN },
@@ -461,7 +462,6 @@
};
static struct proc_xfs_info xfs_info_unset[] = {
/* the few simple ones we can get from the mount struct */
- { XFS_MOUNT_IDELETE, "," MNTOPT_IKEEP },
{ XFS_MOUNT_COMPAT_IOSIZE, "," MNTOPT_LARGEIO },
{ XFS_MOUNT_BARRIER, "," MNTOPT_NOBARRIER },
{ XFS_MOUNT_SMALL_INUMS, "," MNTOPT_64BITINODE },
diff --git a/fs/xfs/xfs_bit.c b/fs/xfs/xfs_bit.c
index 4822884..fab0b6d 100644
--- a/fs/xfs/xfs_bit.c
+++ b/fs/xfs/xfs_bit.c
@@ -25,6 +25,109 @@
* XFS bit manipulation routines, used in non-realtime code.
*/
+#ifndef HAVE_ARCH_HIGHBIT
+/*
+ * Index of high bit number in byte, -1 for none set, 0..7 otherwise.
+ */
+static const char xfs_highbit[256] = {
+ -1, 0, 1, 1, 2, 2, 2, 2, /* 00 .. 07 */
+ 3, 3, 3, 3, 3, 3, 3, 3, /* 08 .. 0f */
+ 4, 4, 4, 4, 4, 4, 4, 4, /* 10 .. 17 */
+ 4, 4, 4, 4, 4, 4, 4, 4, /* 18 .. 1f */
+ 5, 5, 5, 5, 5, 5, 5, 5, /* 20 .. 27 */
+ 5, 5, 5, 5, 5, 5, 5, 5, /* 28 .. 2f */
+ 5, 5, 5, 5, 5, 5, 5, 5, /* 30 .. 37 */
+ 5, 5, 5, 5, 5, 5, 5, 5, /* 38 .. 3f */
+ 6, 6, 6, 6, 6, 6, 6, 6, /* 40 .. 47 */
+ 6, 6, 6, 6, 6, 6, 6, 6, /* 48 .. 4f */
+ 6, 6, 6, 6, 6, 6, 6, 6, /* 50 .. 57 */
+ 6, 6, 6, 6, 6, 6, 6, 6, /* 58 .. 5f */
+ 6, 6, 6, 6, 6, 6, 6, 6, /* 60 .. 67 */
+ 6, 6, 6, 6, 6, 6, 6, 6, /* 68 .. 6f */
+ 6, 6, 6, 6, 6, 6, 6, 6, /* 70 .. 77 */
+ 6, 6, 6, 6, 6, 6, 6, 6, /* 78 .. 7f */
+ 7, 7, 7, 7, 7, 7, 7, 7, /* 80 .. 87 */
+ 7, 7, 7, 7, 7, 7, 7, 7, /* 88 .. 8f */
+ 7, 7, 7, 7, 7, 7, 7, 7, /* 90 .. 97 */
+ 7, 7, 7, 7, 7, 7, 7, 7, /* 98 .. 9f */
+ 7, 7, 7, 7, 7, 7, 7, 7, /* a0 .. a7 */
+ 7, 7, 7, 7, 7, 7, 7, 7, /* a8 .. af */
+ 7, 7, 7, 7, 7, 7, 7, 7, /* b0 .. b7 */
+ 7, 7, 7, 7, 7, 7, 7, 7, /* b8 .. bf */
+ 7, 7, 7, 7, 7, 7, 7, 7, /* c0 .. c7 */
+ 7, 7, 7, 7, 7, 7, 7, 7, /* c8 .. cf */
+ 7, 7, 7, 7, 7, 7, 7, 7, /* d0 .. d7 */
+ 7, 7, 7, 7, 7, 7, 7, 7, /* d8 .. df */
+ 7, 7, 7, 7, 7, 7, 7, 7, /* e0 .. e7 */
+ 7, 7, 7, 7, 7, 7, 7, 7, /* e8 .. ef */
+ 7, 7, 7, 7, 7, 7, 7, 7, /* f0 .. f7 */
+ 7, 7, 7, 7, 7, 7, 7, 7, /* f8 .. ff */
+};
+#endif
+
+/*
+ * xfs_highbit32: get high bit set out of 32-bit argument, -1 if none set.
+ */
+inline int
+xfs_highbit32(
+ __uint32_t v)
+{
+#ifdef HAVE_ARCH_HIGHBIT
+ return highbit32(v);
+#else
+ int i;
+
+ if (v & 0xffff0000)
+ if (v & 0xff000000)
+ i = 24;
+ else
+ i = 16;
+ else if (v & 0x0000ffff)
+ if (v & 0x0000ff00)
+ i = 8;
+ else
+ i = 0;
+ else
+ return -1;
+ return i + xfs_highbit[(v >> i) & 0xff];
+#endif
+}
+
+/*
+ * xfs_lowbit64: get low bit set out of 64-bit argument, -1 if none set.
+ */
+int
+xfs_lowbit64(
+ __uint64_t v)
+{
+ __uint32_t w = (__uint32_t)v;
+ int n = 0;
+
+ if (w) { /* lower bits */
+ n = ffs(w);
+ } else { /* upper bits */
+ w = (__uint32_t)(v >> 32);
+ if (w && (n = ffs(w)))
+ n += 32;
+ }
+ return n - 1;
+}
+
+/*
+ * xfs_highbit64: get high bit set out of 64-bit argument, -1 if none set.
+ */
+int
+xfs_highbit64(
+ __uint64_t v)
+{
+ __uint32_t h = (__uint32_t)(v >> 32);
+
+ if (h)
+ return xfs_highbit32(h) + 32;
+ return xfs_highbit32((__uint32_t)v);
+}
+
+
/*
* Return whether bitmap is empty.
* Size is number of words in the bitmap, which is padded to word boundary
diff --git a/fs/xfs/xfs_bit.h b/fs/xfs/xfs_bit.h
index 325a007..082641a 100644
--- a/fs/xfs/xfs_bit.h
+++ b/fs/xfs/xfs_bit.h
@@ -47,30 +47,13 @@
}
/* Get high bit set out of 32-bit argument, -1 if none set */
-static inline int xfs_highbit32(__uint32_t v)
-{
- return fls(v) - 1;
-}
-
-/* Get high bit set out of 64-bit argument, -1 if none set */
-static inline int xfs_highbit64(__uint64_t v)
-{
- return fls64(v) - 1;
-}
-
-/* Get low bit set out of 32-bit argument, -1 if none set */
-static inline int xfs_lowbit32(__uint32_t v)
-{
- __uint32_t t = v;
- return (t) ? find_first_bit((unsigned long *)&t, 32) : -1;
-}
+extern int xfs_highbit32(__uint32_t v);
/* Get low bit set out of 64-bit argument, -1 if none set */
-static inline int xfs_lowbit64(__uint64_t v)
-{
- __uint64_t t = v;
- return (t) ? find_first_bit((unsigned long *)&t, 64) : -1;
-}
+extern int xfs_lowbit64(__uint64_t v);
+
+/* Get high bit set out of 64-bit argument, -1 if none set */
+extern int xfs_highbit64(__uint64_t);
/* Return whether bitmap is empty (1 == empty) */
extern int xfs_bitmap_empty(uint *map, uint size);
diff --git a/fs/xfs/xfs_clnt.h b/fs/xfs/xfs_clnt.h
index d16c1b9..d5d1e60 100644
--- a/fs/xfs/xfs_clnt.h
+++ b/fs/xfs/xfs_clnt.h
@@ -86,7 +86,7 @@
#define XFSMNT_NOUUID 0x01000000 /* Ignore fs uuid */
#define XFSMNT_DMAPI 0x02000000 /* enable dmapi/xdsm */
#define XFSMNT_BARRIER 0x04000000 /* use write barriers */
-#define XFSMNT_IDELETE 0x08000000 /* inode cluster delete */
+#define XFSMNT_IKEEP 0x08000000 /* inode cluster delete */
#define XFSMNT_SWALLOC 0x10000000 /* turn on stripe width
* allocation */
#define XFSMNT_DIRSYNC 0x40000000 /* sync creat,link,unlink,rename
diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c
index c5836b9..db9d5fa 100644
--- a/fs/xfs/xfs_ialloc.c
+++ b/fs/xfs/xfs_ialloc.c
@@ -1053,7 +1053,7 @@
/*
* When an inode cluster is free, it becomes eligible for removal
*/
- if ((mp->m_flags & XFS_MOUNT_IDELETE) &&
+ if (!(mp->m_flags & XFS_MOUNT_IKEEP) &&
(rec.ir_freecount == XFS_IALLOC_INODES(mp))) {
*delete = 1;
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index f7c620e..1d8a472 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -366,7 +366,7 @@
#define XFS_MOUNT_SMALL_INUMS (1ULL << 15) /* users wants 32bit inodes */
#define XFS_MOUNT_NOUUID (1ULL << 16) /* ignore uuid during mount */
#define XFS_MOUNT_BARRIER (1ULL << 17)
-#define XFS_MOUNT_IDELETE (1ULL << 18) /* delete empty inode clusters*/
+#define XFS_MOUNT_IKEEP (1ULL << 18) /* keep empty inode clusters*/
#define XFS_MOUNT_SWALLOC (1ULL << 19) /* turn on stripe width
* allocation */
#define XFS_MOUNT_RDONLY (1ULL << 20) /* read-only fs */
diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index ca83ddf..47082c0 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -73,6 +73,18 @@
*/
/*
+ * xfs_lowbit32: get low bit set out of 32-bit argument, -1 if none set.
+ */
+STATIC int
+xfs_lowbit32(
+ __uint32_t v)
+{
+ if (v)
+ return ffs(v) - 1;
+ return -1;
+}
+
+/*
* Allocate space to the bitmap or summary file, and zero it, for growfs.
*/
STATIC int /* error */
@@ -432,7 +444,6 @@
}
bbno = XFS_BITTOBLOCK(mp, bno);
i = 0;
- ASSERT(minlen != 0);
log2len = xfs_highbit32(minlen);
/*
* Loop over all bitmap blocks (bbno + i is current block).
@@ -601,8 +612,6 @@
xfs_suminfo_t sum; /* summary information for extents */
ASSERT(minlen % prod == 0 && maxlen % prod == 0);
- ASSERT(maxlen != 0);
-
/*
* Loop over all the levels starting with maxlen.
* At each level, look at all the bitmap blocks, to see if there
@@ -660,9 +669,6 @@
*rtblock = NULLRTBLOCK;
return 0;
}
- ASSERT(minlen != 0);
- ASSERT(maxlen != 0);
-
/*
* Loop over sizes, from maxlen down to minlen.
* This time, when we do the allocations, allow smaller ones
@@ -1948,7 +1954,6 @@
nsbp->sb_blocksize * nsbp->sb_rextsize);
nsbp->sb_rextents = nsbp->sb_rblocks;
do_div(nsbp->sb_rextents, nsbp->sb_rextsize);
- ASSERT(nsbp->sb_rextents != 0);
nsbp->sb_rextslog = xfs_highbit32(nsbp->sb_rextents);
nrsumlevels = nmp->m_rsumlevels = nsbp->sb_rextslog + 1;
nrsumsize =
diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c
index 413587f..7321304 100644
--- a/fs/xfs/xfs_vfsops.c
+++ b/fs/xfs/xfs_vfsops.c
@@ -281,8 +281,8 @@
mp->m_readio_log = mp->m_writeio_log = ap->iosizelog;
}
- if (ap->flags & XFSMNT_IDELETE)
- mp->m_flags |= XFS_MOUNT_IDELETE;
+ if (ap->flags & XFSMNT_IKEEP)
+ mp->m_flags |= XFS_MOUNT_IKEEP;
if (ap->flags & XFSMNT_DIRSYNC)
mp->m_flags |= XFS_MOUNT_DIRSYNC;
if (ap->flags & XFSMNT_ATTR2)
diff --git a/include/asm-arm/arch-pxa/entry-macro.S b/include/asm-arm/arch-pxa/entry-macro.S
index b7e7308..c145bb0 100644
--- a/include/asm-arm/arch-pxa/entry-macro.S
+++ b/include/asm-arm/arch-pxa/entry-macro.S
@@ -35,7 +35,7 @@
1004:
mrc p6, 0, \irqstat, c6, c0, 0 @ ICIP2
mrc p6, 0, \irqnr, c7, c0, 0 @ ICMR2
- ands \irqstat, \irqstat, \irqnr
+ ands \irqnr, \irqstat, \irqnr
beq 1003f
rsb \irqstat, \irqnr, #0
and \irqstat, \irqstat, \irqnr
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index ac175b4..2357a73 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -520,6 +520,9 @@
#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
#define GCR __REG(0x4050000C) /* Global Control Register */
+#ifdef CONFIG_PXA3xx
+#define GCR_CLKBPB (1 << 31) /* Internal clock enable */
+#endif
#define GCR_nDMAEN (1 << 24) /* non DMA Enable */
#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */
#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */
diff --git a/include/asm-arm/kexec.h b/include/asm-arm/kexec.h
index 1ee17b6..47fe34d 100644
--- a/include/asm-arm/kexec.h
+++ b/include/asm-arm/kexec.h
@@ -8,7 +8,7 @@
/* Maximum address we can reach in physical address mode */
#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
/* Maximum address we can use for the control code buffer */
-#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
#define KEXEC_CONTROL_CODE_SIZE 4096
diff --git a/include/asm-arm/unaligned.h b/include/asm-arm/unaligned.h
index 8431f6e..5db03cf 100644
--- a/include/asm-arm/unaligned.h
+++ b/include/asm-arm/unaligned.h
@@ -40,16 +40,16 @@
*/
#define __get_unaligned_2_le(__p) \
- (__p[0] | __p[1] << 8)
+ (unsigned int)(__p[0] | __p[1] << 8)
#define __get_unaligned_2_be(__p) \
- (__p[0] << 8 | __p[1])
+ (unsigned int)(__p[0] << 8 | __p[1])
#define __get_unaligned_4_le(__p) \
- (__p[0] | __p[1] << 8 | __p[2] << 16 | __p[3] << 24)
+ (unsigned int)(__p[0] | __p[1] << 8 | __p[2] << 16 | __p[3] << 24)
#define __get_unaligned_4_be(__p) \
- (__p[0] << 24 | __p[1] << 16 | __p[2] << 8 | __p[3])
+ (unsigned int)(__p[0] << 24 | __p[1] << 16 | __p[2] << 8 | __p[3])
#define __get_unaligned_8_le(__p) \
((unsigned long long)__get_unaligned_4_le((__p+4)) << 32 | \
diff --git a/include/asm-avr32/pgtable.h b/include/asm-avr32/pgtable.h
index 018f6e2..3ae7b54 100644
--- a/include/asm-avr32/pgtable.h
+++ b/include/asm-avr32/pgtable.h
@@ -157,6 +157,7 @@
#define _PAGE_S(x) _PAGE_NORMAL(x)
#define PAGE_COPY _PAGE_P(PAGE_WRITE | PAGE_READ)
+#define PAGE_SHARED _PAGE_S(PAGE_WRITE | PAGE_READ)
#ifndef __ASSEMBLY__
/*
diff --git a/include/asm-blackfin/gptimers.h b/include/asm-blackfin/gptimers.h
index 8265ea4..4f318f1 100644
--- a/include/asm-blackfin/gptimers.h
+++ b/include/asm-blackfin/gptimers.h
@@ -1,12 +1,11 @@
/*
- * include/asm/bf5xx_timers.h
+ * gptimers.h - Blackfin General Purpose Timer structs/defines/prototypes
*
- * This file contains the major Data structures and constants
- * used for General Purpose Timer Implementation in BF5xx
- *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
* Copyright (C) 2005 John DeHority
* Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de)
*
+ * Licensed under the GPL-2.
*/
#ifndef _BLACKFIN_TIMERS_H_
diff --git a/include/asm-blackfin/irq.h b/include/asm-blackfin/irq.h
index 65480da..86b6783 100644
--- a/include/asm-blackfin/irq.h
+++ b/include/asm-blackfin/irq.h
@@ -67,4 +67,6 @@
#define NO_IRQ ((unsigned int)(-1))
#endif
+#define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1))
+
#endif /* _BFIN_IRQ_H_ */
diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
index 15dbc21..c0694ec 100644
--- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
@@ -23,7 +23,6 @@
#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH))
#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR))
#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR))
-#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR))
#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL))
#define UART_PUT_CHAR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_THR), v)
@@ -58,6 +57,7 @@
struct bfin_serial_port {
struct uart_port port;
unsigned int old_status;
+ unsigned int lsr;
#ifdef CONFIG_SERIAL_BFIN_DMA
int tx_done;
int tx_count;
@@ -67,15 +67,31 @@
unsigned int tx_dma_channel;
unsigned int rx_dma_channel;
struct work_struct tx_dma_workqueue;
-#else
- struct work_struct cts_workqueue;
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ struct work_struct cts_workqueue;
int cts_pin;
int rts_pin;
#endif
};
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
+{
+ unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
+ uart->lsr |= (lsr & (BI|FE|PE|OE));
+ return lsr | uart->lsr;
+}
+
+static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
+{
+ uart->lsr = 0;
+ bfin_write16(uart->port.membase + OFFSET_LSR, -1);
+}
+
struct bfin_serial_port bfin_serial_ports[NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
index 7871d43..b6f513b 100644
--- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
@@ -23,7 +23,6 @@
#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH))
#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR))
#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR))
-#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR))
#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL))
#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
@@ -46,6 +45,7 @@
struct bfin_serial_port {
struct uart_port port;
unsigned int old_status;
+ unsigned int lsr;
#ifdef CONFIG_SERIAL_BFIN_DMA
int tx_done;
int tx_count;
@@ -56,14 +56,34 @@
unsigned int rx_dma_channel;
struct work_struct tx_dma_workqueue;
#else
- struct work_struct cts_workqueue;
+# if ANOMALY_05000230
+ unsigned int anomaly_threshold;
+# endif
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ struct work_struct cts_workqueue;
int cts_pin;
int rts_pin;
#endif
};
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
+{
+ unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
+ uart->lsr |= (lsr & (BI|FE|PE|OE));
+ return lsr | uart->lsr;
+}
+
+static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
+{
+ uart->lsr = 0;
+ bfin_write16(uart->port.membase + OFFSET_LSR, -1);
+}
+
struct bfin_serial_port bfin_serial_ports[NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
index 86e45c3..8fc672d 100644
--- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
@@ -23,7 +23,6 @@
#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH))
#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR))
#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR))
-#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR))
#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL))
#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
@@ -58,6 +57,7 @@
struct bfin_serial_port {
struct uart_port port;
unsigned int old_status;
+ unsigned int lsr;
#ifdef CONFIG_SERIAL_BFIN_DMA
int tx_done;
int tx_count;
@@ -67,15 +67,31 @@
unsigned int tx_dma_channel;
unsigned int rx_dma_channel;
struct work_struct tx_dma_workqueue;
-#else
- struct work_struct cts_workqueue;
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ struct work_struct cts_workqueue;
int cts_pin;
int rts_pin;
#endif
};
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
+{
+ unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
+ uart->lsr |= (lsr & (BI|FE|PE|OE));
+ return lsr | uart->lsr;
+}
+
+static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
+{
+ uart->lsr = 0;
+ bfin_write16(uart->port.membase + OFFSET_LSR, -1);
+}
+
struct bfin_serial_port bfin_serial_ports[NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index 3770aa3..7e6339f 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -24,6 +24,8 @@
#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR))
#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR))
#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL))
+#define UART_GET_MSR(uart) bfin_read16(((uart)->port.membase + OFFSET_MSR))
+#define UART_GET_MCR(uart) bfin_read16(((uart)->port.membase + OFFSET_MCR))
#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
@@ -32,7 +34,9 @@
#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
#define UART_PUT_LSR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LSR),v)
#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
+#define UART_CLEAR_LSR(uart) bfin_write16(((uart)->port.membase + OFFSET_LSR), -1)
#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
+#define UART_PUT_MCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_MCR),v)
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
@@ -68,10 +72,9 @@
unsigned int tx_dma_channel;
unsigned int rx_dma_channel;
struct work_struct tx_dma_workqueue;
-#else
- struct work_struct cts_workqueue;
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ struct work_struct cts_workqueue;
int cts_pin;
int rts_pin;
#endif
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
index 7871d43..b6f513b 100644
--- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
@@ -23,7 +23,6 @@
#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH))
#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR))
#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR))
-#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR))
#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL))
#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
@@ -46,6 +45,7 @@
struct bfin_serial_port {
struct uart_port port;
unsigned int old_status;
+ unsigned int lsr;
#ifdef CONFIG_SERIAL_BFIN_DMA
int tx_done;
int tx_count;
@@ -56,14 +56,34 @@
unsigned int rx_dma_channel;
struct work_struct tx_dma_workqueue;
#else
- struct work_struct cts_workqueue;
+# if ANOMALY_05000230
+ unsigned int anomaly_threshold;
+# endif
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ struct work_struct cts_workqueue;
int cts_pin;
int rts_pin;
#endif
};
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
+{
+ unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
+ uart->lsr |= (lsr & (BI|FE|PE|OE));
+ return lsr | uart->lsr;
+}
+
+static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
+{
+ uart->lsr = 0;
+ bfin_write16(uart->port.membase + OFFSET_LSR, -1);
+}
+
struct bfin_serial_port bfin_serial_ports[NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
diff --git a/include/asm-blackfin/mach-bf561/blackfin.h b/include/asm-blackfin/mach-bf561/blackfin.h
index 362617f..3a16df2 100644
--- a/include/asm-blackfin/mach-bf561/blackfin.h
+++ b/include/asm-blackfin/mach-bf561/blackfin.h
@@ -49,7 +49,8 @@
#define bfin_read_FIO_INEN() bfin_read_FIO0_INEN()
#define bfin_write_FIO_INEN(val) bfin_write_FIO0_INEN(val)
-
+#define SIC_IWR0 SICA_IWR0
+#define SIC_IWR1 SICA_IWR1
#define SIC_IAR0 SICA_IAR0
#define bfin_write_SIC_IMASK0 bfin_write_SICA_IMASK0
#define bfin_write_SIC_IMASK1 bfin_write_SICA_IMASK1
diff --git a/include/asm-blackfin/mach-bf561/cdefBF561.h b/include/asm-blackfin/mach-bf561/cdefBF561.h
index d667816..1bc8d2f 100644
--- a/include/asm-blackfin/mach-bf561/cdefBF561.h
+++ b/include/asm-blackfin/mach-bf561/cdefBF561.h
@@ -559,6 +559,7 @@
#define bfin_write_PPI0_CONTROL(val) bfin_write16(PPI0_CONTROL,val)
#define bfin_read_PPI0_STATUS() bfin_read16(PPI0_STATUS)
#define bfin_write_PPI0_STATUS(val) bfin_write16(PPI0_STATUS,val)
+#define bfin_clear_PPI0_STATUS() bfin_read_PPI0_STATUS()
#define bfin_read_PPI0_COUNT() bfin_read16(PPI0_COUNT)
#define bfin_write_PPI0_COUNT(val) bfin_write16(PPI0_COUNT,val)
#define bfin_read_PPI0_DELAY() bfin_read16(PPI0_DELAY)
@@ -570,6 +571,7 @@
#define bfin_write_PPI1_CONTROL(val) bfin_write16(PPI1_CONTROL,val)
#define bfin_read_PPI1_STATUS() bfin_read16(PPI1_STATUS)
#define bfin_write_PPI1_STATUS(val) bfin_write16(PPI1_STATUS,val)
+#define bfin_clear_PPI1_STATUS() bfin_read_PPI1_STATUS()
#define bfin_read_PPI1_COUNT() bfin_read16(PPI1_COUNT)
#define bfin_write_PPI1_COUNT(val) bfin_write16(PPI1_COUNT,val)
#define bfin_read_PPI1_DELAY() bfin_read16(PPI1_DELAY)
diff --git a/include/asm-mips/mach-db1x00/db1200.h b/include/asm-mips/mach-db1x00/db1200.h
index 050eae8..a6bdac6 100644
--- a/include/asm-mips/mach-db1x00/db1200.h
+++ b/include/asm-mips/mach-db1x00/db1200.h
@@ -25,6 +25,7 @@
#define __ASM_DB1200_H
#include <linux/types.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
// This is defined in au1000.h with bogus value
#undef AU1X00_EXTERNAL_INT
diff --git a/include/asm-mips/mach-db1x00/db1x00.h b/include/asm-mips/mach-db1x00/db1x00.h
index 0f5f4c2..e7a88ba 100644
--- a/include/asm-mips/mach-db1x00/db1x00.h
+++ b/include/asm-mips/mach-db1x00/db1x00.h
@@ -28,6 +28,7 @@
#ifndef __ASM_DB1X00_H
#define __ASM_DB1X00_H
+#include <asm/mach-au1x00/au1xxx_psc.h>
#ifdef CONFIG_MIPS_DB1550
diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h
index d9f384a..ed5fd73 100644
--- a/include/asm-mips/mach-pb1x00/pb1200.h
+++ b/include/asm-mips/mach-pb1x00/pb1200.h
@@ -25,6 +25,7 @@
#define __ASM_PB1200_H
#include <linux/types.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
// This is defined in au1000.h with bogus value
#undef AU1X00_EXTERNAL_INT
diff --git a/include/asm-mips/mach-pb1x00/pb1550.h b/include/asm-mips/mach-pb1x00/pb1550.h
index 9a4955c..c2ab0e2 100644
--- a/include/asm-mips/mach-pb1x00/pb1550.h
+++ b/include/asm-mips/mach-pb1x00/pb1550.h
@@ -28,6 +28,7 @@
#define __ASM_PB1550_H
#include <linux/types.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h
index 0d62389..edc0cfd 100644
--- a/include/asm-powerpc/reg.h
+++ b/include/asm-powerpc/reg.h
@@ -153,6 +153,9 @@
#define CTRL_RUNLATCH 0x1
#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
#define DABR_TRANSLATION (1UL << 2)
+#define SPRN_DABRX 0x3F7 /* Data Address Breakpoint Register Extension */
+#define DABRX_USER (1UL << 0)
+#define DABRX_KERNEL (1UL << 1)
#define SPRN_DAR 0x013 /* Data Address Register */
#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
#define DSISR_NOHPTE 0x40000000 /* no translation found */
diff --git a/include/asm-sh/cpu-sh3/cache.h b/include/asm-sh/cpu-sh3/cache.h
index 56bd838..bee2d81 100644
--- a/include/asm-sh/cpu-sh3/cache.h
+++ b/include/asm-sh/cpu-sh3/cache.h
@@ -35,7 +35,7 @@
defined(CONFIG_CPU_SUBTYPE_SH7710) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define CCR3 0xa40000b4
+#define CCR3_REG 0xa40000b4
#define CCR_CACHE_16KB 0x00010000
#define CCR_CACHE_32KB 0x00020000
#endif
diff --git a/include/asm-sh/entry-macros.S b/include/asm-sh/entry-macros.S
index 500030e..2dab0b8 100644
--- a/include/asm-sh/entry-macros.S
+++ b/include/asm-sh/entry-macros.S
@@ -12,7 +12,7 @@
not r11, r11
stc sr, r10
and r11, r10
-#ifdef CONFIG_HAS_SR_RB
+#ifdef CONFIG_CPU_HAS_SR_RB
stc k_g_imask, r11
or r11, r10
#endif
@@ -20,7 +20,7 @@
.endm
.macro get_current_thread_info, ti, tmp
-#ifdef CONFIG_HAS_SR_RB
+#ifdef CONFIG_CPU_HAS_SR_RB
stc r7_bank, \ti
#else
mov #((THREAD_SIZE - 1) >> 10) ^ 0xff, \tmp
diff --git a/include/asm-sparc64/ptrace.h b/include/asm-sparc64/ptrace.h
index 67341cf..6da1978 100644
--- a/include/asm-sparc64/ptrace.h
+++ b/include/asm-sparc64/ptrace.h
@@ -109,6 +109,7 @@
#define profile_pc(regs) instruction_pointer(regs)
#endif
extern void show_regs(struct pt_regs *);
+extern void __show_regs(struct pt_regs *);
#endif
#else /* __ASSEMBLY__ */
diff --git a/include/asm-sparc64/reboot.h b/include/asm-sparc64/reboot.h
new file mode 100644
index 0000000..3f3f43f
--- /dev/null
+++ b/include/asm-sparc64/reboot.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC64_REBOOT_H
+#define _SPARC64_REBOOT_H
+
+extern void machine_alt_power_off(void);
+
+#endif /* _SPARC64_REBOOT_H */
diff --git a/include/asm-sparc64/syscalls.h b/include/asm-sparc64/syscalls.h
new file mode 100644
index 0000000..45a43f6
--- /dev/null
+++ b/include/asm-sparc64/syscalls.h
@@ -0,0 +1,13 @@
+#ifndef _SPARC64_SYSCALLS_H
+#define _SPARC64_SYSCALLS_H
+
+struct pt_regs;
+
+extern asmlinkage long sparc_do_fork(unsigned long clone_flags,
+ unsigned long stack_start,
+ struct pt_regs *regs,
+ unsigned long stack_size);
+
+extern asmlinkage int sparc_execve(struct pt_regs *regs);
+
+#endif /* _SPARC64_SYSCALLS_H */
diff --git a/include/asm-sparc64/system.h b/include/asm-sparc64/system.h
index 1faefa6..ed91a5d 100644
--- a/include/asm-sparc64/system.h
+++ b/include/asm-sparc64/system.h
@@ -117,6 +117,7 @@
extern void sun_do_break(void);
extern int stop_a_enabled;
+extern void fault_in_user_windows(void);
extern void synchronize_user_stack(void);
extern void __flushw_user(void);
diff --git a/include/asm-x86/futex.h b/include/asm-x86/futex.h
index cd9f894..c9952ea 100644
--- a/include/asm-x86/futex.h
+++ b/include/asm-x86/futex.h
@@ -102,6 +102,13 @@
static inline int
futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
{
+
+#if defined(CONFIG_X86_32) && !defined(CONFIG_X86_BSWAP)
+ /* Real i386 machines have no cmpxchg instruction */
+ if (boot_cpu_data.x86 == 3)
+ return -ENOSYS;
+#endif
+
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
return -EFAULT;
diff --git a/include/asm-x86/lguest.h b/include/asm-x86/lguest.h
index 4d9367b..9b17571 100644
--- a/include/asm-x86/lguest.h
+++ b/include/asm-x86/lguest.h
@@ -23,6 +23,17 @@
/* Found in switcher.S */
extern unsigned long default_idt_entries[];
+/* Declarations for definitions in lguest_guest.S */
+extern char lguest_noirq_start[], lguest_noirq_end[];
+extern const char lgstart_cli[], lgend_cli[];
+extern const char lgstart_sti[], lgend_sti[];
+extern const char lgstart_popf[], lgend_popf[];
+extern const char lgstart_pushf[], lgend_pushf[];
+extern const char lgstart_iret[], lgend_iret[];
+
+extern void lguest_iret(void);
+extern void lguest_init(void);
+
struct lguest_regs
{
/* Manually saved part. */
diff --git a/include/asm-x86/nops.h b/include/asm-x86/nops.h
index fec025c..e3b2bce 100644
--- a/include/asm-x86/nops.h
+++ b/include/asm-x86/nops.h
@@ -3,17 +3,29 @@
/* Define nops for use with alternative() */
-/* generic versions from gas */
-#define GENERIC_NOP1 ".byte 0x90\n"
-#define GENERIC_NOP2 ".byte 0x89,0xf6\n"
-#define GENERIC_NOP3 ".byte 0x8d,0x76,0x00\n"
-#define GENERIC_NOP4 ".byte 0x8d,0x74,0x26,0x00\n"
-#define GENERIC_NOP5 GENERIC_NOP1 GENERIC_NOP4
-#define GENERIC_NOP6 ".byte 0x8d,0xb6,0x00,0x00,0x00,0x00\n"
-#define GENERIC_NOP7 ".byte 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00\n"
-#define GENERIC_NOP8 GENERIC_NOP1 GENERIC_NOP7
+/* generic versions from gas
+ 1: nop
+ 2: movl %esi,%esi
+ 3: leal 0x00(%esi),%esi
+ 4: leal 0x00(,%esi,1),%esi
+ 6: leal 0x00000000(%esi),%esi
+ 7: leal 0x00000000(,%esi,1),%esi
+*/
+#define GENERIC_NOP1 ".byte 0x90\n"
+#define GENERIC_NOP2 ".byte 0x89,0xf6\n"
+#define GENERIC_NOP3 ".byte 0x8d,0x76,0x00\n"
+#define GENERIC_NOP4 ".byte 0x8d,0x74,0x26,0x00\n"
+#define GENERIC_NOP5 GENERIC_NOP1 GENERIC_NOP4
+#define GENERIC_NOP6 ".byte 0x8d,0xb6,0x00,0x00,0x00,0x00\n"
+#define GENERIC_NOP7 ".byte 0x8d,0xb4,0x26,0x00,0x00,0x00,0x00\n"
+#define GENERIC_NOP8 GENERIC_NOP1 GENERIC_NOP7
-/* Opteron 64bit nops */
+/* Opteron 64bit nops
+ 1: nop
+ 2: osp nop
+ 3: osp osp nop
+ 4: osp osp osp nop
+*/
#define K8_NOP1 GENERIC_NOP1
#define K8_NOP2 ".byte 0x66,0x90\n"
#define K8_NOP3 ".byte 0x66,0x66,0x90\n"
@@ -23,19 +35,35 @@
#define K8_NOP7 K8_NOP4 K8_NOP3
#define K8_NOP8 K8_NOP4 K8_NOP4
-/* K7 nops */
-/* uses eax dependencies (arbitary choice) */
-#define K7_NOP1 GENERIC_NOP1
+/* K7 nops
+ uses eax dependencies (arbitary choice)
+ 1: nop
+ 2: movl %eax,%eax
+ 3: leal (,%eax,1),%eax
+ 4: leal 0x00(,%eax,1),%eax
+ 6: leal 0x00000000(%eax),%eax
+ 7: leal 0x00000000(,%eax,1),%eax
+*/
+#define K7_NOP1 GENERIC_NOP1
#define K7_NOP2 ".byte 0x8b,0xc0\n"
#define K7_NOP3 ".byte 0x8d,0x04,0x20\n"
#define K7_NOP4 ".byte 0x8d,0x44,0x20,0x00\n"
#define K7_NOP5 K7_NOP4 ASM_NOP1
#define K7_NOP6 ".byte 0x8d,0x80,0,0,0,0\n"
-#define K7_NOP7 ".byte 0x8D,0x04,0x05,0,0,0,0\n"
-#define K7_NOP8 K7_NOP7 ASM_NOP1
+#define K7_NOP7 ".byte 0x8D,0x04,0x05,0,0,0,0\n"
+#define K7_NOP8 K7_NOP7 ASM_NOP1
-/* P6 nops */
-/* uses eax dependencies (Intel-recommended choice) */
+/* P6 nops
+ uses eax dependencies (Intel-recommended choice)
+ 1: nop
+ 2: osp nop
+ 3: nopl (%eax)
+ 4: nopl 0x00(%eax)
+ 5: nopl 0x00(%eax,%eax,1)
+ 6: osp nopl 0x00(%eax,%eax,1)
+ 7: nopl 0x00000000(%eax)
+ 8: nopl 0x00000000(%eax,%eax,1)
+*/
#define P6_NOP1 GENERIC_NOP1
#define P6_NOP2 ".byte 0x66,0x90\n"
#define P6_NOP3 ".byte 0x0f,0x1f,0x00\n"
@@ -63,9 +91,7 @@
#define ASM_NOP6 K7_NOP6
#define ASM_NOP7 K7_NOP7
#define ASM_NOP8 K7_NOP8
-#elif defined(CONFIG_M686) || defined(CONFIG_MPENTIUMII) || \
- defined(CONFIG_MPENTIUMIII) || defined(CONFIG_MPENTIUMM) || \
- defined(CONFIG_MCORE2) || defined(CONFIG_PENTIUM4)
+#elif defined(CONFIG_X86_P6_NOP)
#define ASM_NOP1 P6_NOP1
#define ASM_NOP2 P6_NOP2
#define ASM_NOP3 P6_NOP3
diff --git a/include/asm-x86/page_64.h b/include/asm-x86/page_64.h
index f7393bc..1435460 100644
--- a/include/asm-x86/page_64.h
+++ b/include/asm-x86/page_64.h
@@ -47,8 +47,12 @@
#define __PHYSICAL_MASK_SHIFT 46
#define __VIRTUAL_MASK_SHIFT 48
-#define KERNEL_TEXT_SIZE (40*1024*1024)
-#define KERNEL_TEXT_START _AC(0xffffffff80000000, UL)
+/*
+ * Kernel image size is limited to 128 MB (see level2_kernel_pgt in
+ * arch/x86/kernel/head_64.S), and it is mapped here:
+ */
+#define KERNEL_IMAGE_SIZE (128*1024*1024)
+#define KERNEL_IMAGE_START _AC(0xffffffff80000000, UL)
#ifndef __ASSEMBLY__
void clear_page(void *page);
diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h
index a842c72..b478efa 100644
--- a/include/asm-x86/pgtable_32.h
+++ b/include/asm-x86/pgtable_32.h
@@ -91,7 +91,9 @@
/* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
#define pmd_none(x) (!(unsigned long)pmd_val(x))
#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT)
-#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+#define pmd_bad(x) ((pmd_val(x) \
+ & ~(PAGE_MASK | _PAGE_USER | _PAGE_PSE | _PAGE_NX)) \
+ != _KERNPG_TABLE)
#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h
index 0a0b77b..0a92583 100644
--- a/include/asm-x86/pgtable_64.h
+++ b/include/asm-x86/pgtable_64.h
@@ -153,12 +153,14 @@
static inline unsigned long pud_bad(pud_t pud)
{
- return pud_val(pud) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER);
+ return pud_val(pud) &
+ ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER | _PAGE_PSE | _PAGE_NX);
}
static inline unsigned long pmd_bad(pmd_t pmd)
{
- return pmd_val(pmd) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER);
+ return pmd_val(pmd) &
+ ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER | _PAGE_PSE | _PAGE_NX);
}
#define pte_none(x) (!pte_val(x))
diff --git a/include/asm-x86/ptrace-abi.h b/include/asm-x86/ptrace-abi.h
index 81a8ee4..f224eb3 100644
--- a/include/asm-x86/ptrace-abi.h
+++ b/include/asm-x86/ptrace-abi.h
@@ -89,13 +89,13 @@
*/
struct ptrace_bts_config {
/* requested or actual size of BTS buffer in bytes */
- u32 size;
+ __u32 size;
/* bitmask of below flags */
- u32 flags;
+ __u32 flags;
/* buffer overflow signal */
- u32 signal;
+ __u32 signal;
/* actual size of bts_struct in bytes */
- u32 bts_size;
+ __u32 bts_size;
};
#endif
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 78bbaca..1c622e2 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -659,6 +659,11 @@
return (dev_id[0] >> 8) & 0x1f;
}
+static inline int atapi_id_dmadir(const u16 *dev_id)
+{
+ return ata_id_major_version(dev_id) >= 7 && (dev_id[62] & 0x8000);
+}
+
static inline int is_multi_taskfile(struct ata_taskfile *tf)
{
return (tf->command == ATA_CMD_READ_MULTI) ||
diff --git a/include/linux/connector.h b/include/linux/connector.h
index da6dd95..96a89d3 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -170,7 +170,5 @@
void cn_queue_wrapper(struct work_struct *work);
-extern int cn_already_initialized;
-
#endif /* __KERNEL__ */
#endif /* __CONNECTOR_H */
diff --git a/include/linux/elfcore-compat.h b/include/linux/elfcore-compat.h
index 532d13a..0a90e1c 100644
--- a/include/linux/elfcore-compat.h
+++ b/include/linux/elfcore-compat.h
@@ -45,8 +45,8 @@
char pr_zomb;
char pr_nice;
compat_ulong_t pr_flag;
- compat_uid_t pr_uid;
- compat_gid_t pr_gid;
+ __compat_uid_t pr_uid;
+ __compat_gid_t pr_gid;
compat_pid_t pr_pid, pr_ppid, pr_pgrp, pr_sid;
char pr_fname[16];
char pr_psargs[ELF_PRARGSZ];
diff --git a/include/linux/ext4_fs_extents.h b/include/linux/ext4_fs_extents.h
index 697da4b..1285c58 100644
--- a/include/linux/ext4_fs_extents.h
+++ b/include/linux/ext4_fs_extents.h
@@ -227,5 +227,6 @@
ext4_lblk_t *, ext4_fsblk_t *);
extern int ext4_ext_search_right(struct inode *, struct ext4_ext_path *,
ext4_lblk_t *, ext4_fsblk_t *);
+extern void ext4_ext_drop_refs(struct ext4_ext_path *);
#endif /* _LINUX_EXT4_EXTENTS */
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 2961ec7..4982998 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -109,6 +109,14 @@
}
#endif
+#if defined(CONFIG_PREEMPT_RCU) && defined(CONFIG_NO_HZ)
+extern void rcu_irq_enter(void);
+extern void rcu_irq_exit(void);
+#else
+# define rcu_irq_enter() do { } while (0)
+# define rcu_irq_exit() do { } while (0)
+#endif /* CONFIG_PREEMPT_RCU */
+
/*
* It is safe to do non-atomic ops on ->hardirq_context,
* because NMI handlers may not preempt and the ops are
@@ -117,6 +125,7 @@
*/
#define __irq_enter() \
do { \
+ rcu_irq_enter(); \
account_system_vtime(current); \
add_preempt_count(HARDIRQ_OFFSET); \
trace_hardirq_enter(); \
@@ -135,6 +144,7 @@
trace_hardirq_exit(); \
account_system_vtime(current); \
sub_preempt_count(HARDIRQ_OFFSET); \
+ rcu_irq_exit(); \
} while (0)
/*
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 76014f8..365e0df 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -271,9 +271,16 @@
* This is done at arch_initcall time, before declaring any i2c adapters.
* Modules for add-on boards must use other calls.
*/
+#ifdef CONFIG_I2C_BOARDINFO
extern int
i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned n);
-
+#else
+static inline int
+i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned n)
+{
+ return 0;
+}
+#endif
/*
* The following structs are for those who like to implement new bus drivers:
@@ -598,7 +605,7 @@
"additionally"); \
I2C_CLIENT_MODULE_PARM(ignore, "List of adapter,address pairs not to " \
"scan"); \
-const static struct i2c_client_address_data addr_data = { \
+static const struct i2c_client_address_data addr_data = { \
.normal_i2c = normal_i2c, \
.probe = probe, \
.ignore = ignore, \
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index 42dc6a3..e157c13 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -129,7 +129,8 @@
/*
* Display a 6 byte device address (MAC) in a readable format.
*/
-extern __pure char *print_mac(char *buf, const unsigned char *addr);
+extern char *print_mac(char *buf, const unsigned char *addr);
+#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
#define MAC_BUF_SIZE 18
#define DECLARE_MAC_BUF(var) char var[MAC_BUF_SIZE] __maybe_unused
diff --git a/include/linux/libata.h b/include/linux/libata.h
index ce7603a..a05f600 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -138,6 +138,7 @@
ATA_DFLAG_AN = (1 << 7), /* AN configured */
ATA_DFLAG_HIPM = (1 << 8), /* device supports HIPM */
ATA_DFLAG_DIPM = (1 << 9), /* device supports DIPM */
+ ATA_DFLAG_DMADIR = (1 << 10), /* device requires DMADIR */
ATA_DFLAG_CFG_MASK = (1 << 12) - 1,
ATA_DFLAG_PIO = (1 << 12), /* device limited to PIO mode */
diff --git a/include/linux/maple.h b/include/linux/maple.h
index 3f01e2b..d31e36e 100644
--- a/include/linux/maple.h
+++ b/include/linux/maple.h
@@ -64,7 +64,6 @@
int (*connect) (struct maple_device * dev);
void (*disconnect) (struct maple_device * dev);
struct device_driver drv;
- int registered;
};
void maple_getcond_callback(struct maple_device *dev,
diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
index d74e79b..f0680c2 100644
--- a/include/linux/netfilter.h
+++ b/include/linux/netfilter.h
@@ -31,7 +31,7 @@
#define NF_VERDICT_QMASK 0xffff0000
#define NF_VERDICT_QBITS 16
-#define NF_QUEUE_NR(x) (((x << NF_VERDICT_QBITS) & NF_VERDICT_QMASK) | NF_QUEUE)
+#define NF_QUEUE_NR(x) ((((x) << NF_VERDICT_BITS) & NF_VERDICT_QMASK) | NF_QUEUE)
/* only for userspace compatibility */
#ifndef __KERNEL__
@@ -51,7 +51,7 @@
};
union nf_inet_addr {
- u_int32_t all[4];
+ __u32 all[4];
__be32 ip;
__be32 ip6[4];
struct in_addr in;
diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild
index 91fef0c..3aff513 100644
--- a/include/linux/netfilter/Kbuild
+++ b/include/linux/netfilter/Kbuild
@@ -30,7 +30,6 @@
header-y += xt_multiport.h
header-y += xt_owner.h
header-y += xt_pkttype.h
-header-y += xt_policy.h
header-y += xt_rateest.h
header-y += xt_realm.h
header-y += xt_sctp.h
@@ -47,3 +46,4 @@
unifdef-y += nfnetlink_compat.h
unifdef-y += x_tables.h
unifdef-y += xt_physdev.h
+unifdef-y += xt_policy.h
diff --git a/include/linux/netfilter/xt_hashlimit.h b/include/linux/netfilter/xt_hashlimit.h
index 58b818e..51b18d8 100644
--- a/include/linux/netfilter/xt_hashlimit.h
+++ b/include/linux/netfilter/xt_hashlimit.h
@@ -61,7 +61,6 @@
/* Used internally by the kernel */
struct xt_hashlimit_htable *hinfo __attribute__((aligned(8)));
- struct xt_hashlimit_mtinfo1 *master __attribute__((aligned(8)));
};
#endif /*_XT_HASHLIMIT_H*/
diff --git a/include/linux/rcuclassic.h b/include/linux/rcuclassic.h
index 4d66242..b3dccd6 100644
--- a/include/linux/rcuclassic.h
+++ b/include/linux/rcuclassic.h
@@ -160,5 +160,8 @@
extern long rcu_batches_completed(void);
extern long rcu_batches_completed_bh(void);
+#define rcu_enter_nohz() do { } while (0)
+#define rcu_exit_nohz() do { } while (0)
+
#endif /* __KERNEL__ */
#endif /* __LINUX_RCUCLASSIC_H */
diff --git a/include/linux/rcupreempt.h b/include/linux/rcupreempt.h
index 60c2a03..01152ed 100644
--- a/include/linux/rcupreempt.h
+++ b/include/linux/rcupreempt.h
@@ -82,5 +82,27 @@
struct softirq_action;
+#ifdef CONFIG_NO_HZ
+DECLARE_PER_CPU(long, dynticks_progress_counter);
+
+static inline void rcu_enter_nohz(void)
+{
+ __get_cpu_var(dynticks_progress_counter)++;
+ WARN_ON(__get_cpu_var(dynticks_progress_counter) & 0x1);
+ mb();
+}
+
+static inline void rcu_exit_nohz(void)
+{
+ mb();
+ __get_cpu_var(dynticks_progress_counter)++;
+ WARN_ON(!(__get_cpu_var(dynticks_progress_counter) & 0x1));
+}
+
+#else /* CONFIG_NO_HZ */
+#define rcu_enter_nohz() do { } while (0)
+#define rcu_exit_nohz() do { } while (0)
+#endif /* CONFIG_NO_HZ */
+
#endif /* __KERNEL__ */
#endif /* __LINUX_RCUPREEMPT_H */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index e217d18..2c9621f 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -242,6 +242,7 @@
extern void sched_init(void);
extern void sched_init_smp(void);
+extern asmlinkage void schedule_tail(struct task_struct *prev);
extern void init_idle(struct task_struct *idle, int cpu);
extern void init_idle_bootup_task(struct task_struct *idle);
@@ -1189,7 +1190,7 @@
int softirq_context;
#endif
#ifdef CONFIG_LOCKDEP
-# define MAX_LOCK_DEPTH 30UL
+# define MAX_LOCK_DEPTH 48UL
u64 curr_chain_key;
int lockdep_depth;
struct held_lock held_locks[MAX_LOCK_DEPTH];
diff --git a/include/asm-sh/sci.h b/include/linux/serial_sci.h
similarity index 72%
rename from include/asm-sh/sci.h
rename to include/linux/serial_sci.h
index 52e7366..893cc53 100644
--- a/include/asm-sh/sci.h
+++ b/include/linux/serial_sci.h
@@ -1,12 +1,10 @@
-#ifndef __ASM_SH_SCI_H
-#define __ASM_SH_SCI_H
+#ifndef __LINUX_SERIAL_SCI_H
+#define __LINUX_SERIAL_SCI_H
#include <linux/serial_core.h>
/*
- * Generic header for SuperH SCI(F)
- *
- * Do not place SH-specific parts in here, sh64 and h8300 depend on this too.
+ * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts)
*/
/* Offsets into the sci_port->irqs array */
@@ -31,4 +29,4 @@
int early_sci_setup(struct uart_port *port);
-#endif /* __ASM_SH_SCI_H */
+#endif /* __LINUX_SERIAL_SCI_H */
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 9d5da8b..20add65 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -282,6 +282,13 @@
struct ssb_boardinfo boardinfo;
/* Contents of the SPROM. */
struct ssb_sprom sprom;
+ /* If the board has a cardbus slot, this is set to true. */
+ bool has_cardbus_slot;
+
+#ifdef CONFIG_SSB_EMBEDDED
+ /* Lock for GPIO register access. */
+ spinlock_t gpio_lock;
+#endif /* EMBEDDED */
/* Internal-only stuff follows. Do not touch. */
struct list_head list;
@@ -294,8 +301,13 @@
/* The initialization-invariants. */
struct ssb_init_invariants {
+ /* Versioning information about the PCB. */
struct ssb_boardinfo boardinfo;
+ /* The SPROM information. That's either stored in an
+ * EEPROM or NVRAM on the board. */
struct ssb_sprom sprom;
+ /* If the board has a cardbus slot, this is set to true. */
+ bool has_cardbus_slot;
};
/* Type of function to fetch the invariants. */
typedef int (*ssb_invariants_func_t)(struct ssb_bus *bus,
diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h
index 4cb9954..536851b 100644
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -51,9 +51,12 @@
#define SSB_CHIPCO_CAP_JTAGM 0x00400000 /* JTAG master present */
#define SSB_CHIPCO_CAP_BROM 0x00800000 /* Internal boot ROM active */
#define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */
+#define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
+#define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
#define SSB_CHIPCO_CORECTL 0x0008
#define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
#define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
+#define SSB_CHIPCO_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */
#define SSB_CHIPCO_BIST 0x000C
#define SSB_CHIPCO_OTPS 0x0010 /* OTP status */
#define SSB_CHIPCO_OTPS_PROGFAIL 0x80000000
@@ -357,6 +360,11 @@
u16 fast_pwrup_delay;
};
+static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
+{
+ return (cc->dev != NULL);
+}
+
extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
#include <linux/pm.h>
@@ -382,11 +390,13 @@
extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc,
u32 ticks);
+/* Chipcommon GPIO pin access. */
u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask);
-
-void ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value);
-
-void ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value);
+u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value);
+u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value);
+u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value);
+u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value);
+u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value);
#ifdef CONFIG_SSB_SERIAL
extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
diff --git a/include/linux/ssb/ssb_driver_extif.h b/include/linux/ssb/ssb_driver_extif.h
index a916435..91161f0 100644
--- a/include/linux/ssb/ssb_driver_extif.h
+++ b/include/linux/ssb/ssb_driver_extif.h
@@ -171,11 +171,15 @@
extern void ssb_extif_timing_init(struct ssb_extif *extif,
unsigned long ns);
+extern void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
+ u32 ticks);
+
+/* Extif GPIO pin access */
u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask);
-
-void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value);
-
-void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value);
+u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value);
+u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value);
+u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value);
+u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value);
#ifdef CONFIG_SSB_SERIAL
extern int ssb_extif_serial_init(struct ssb_extif *extif,
@@ -200,5 +204,11 @@
{
}
+static inline
+void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
+ u32 ticks)
+{
+}
+
#endif /* CONFIG_SSB_DRIVER_EXTIF */
#endif /* LINUX_SSB_EXTIFCORE_H_ */
diff --git a/include/linux/ssb/ssb_driver_pci.h b/include/linux/ssb/ssb_driver_pci.h
index 9cfffb7..5e25bac 100644
--- a/include/linux/ssb/ssb_driver_pci.h
+++ b/include/linux/ssb/ssb_driver_pci.h
@@ -51,6 +51,11 @@
#define SSB_PCICORE_SBTOPCI1_MASK 0xFC000000
#define SSB_PCICORE_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */
#define SSB_PCICORE_SBTOPCI2_MASK 0xC0000000
+#define SSB_PCICORE_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */
+#define SSB_PCICORE_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */
+#define SSB_PCICORE_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */
+#define SSB_PCICORE_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */
+#define SSB_PCICORE_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
/* SBtoPCIx */
#define SSB_PCICORE_SBTOPCI_MEM 0x00000000
diff --git a/include/linux/ssb/ssb_embedded.h b/include/linux/ssb/ssb_embedded.h
new file mode 100644
index 0000000..8d8dedf
--- /dev/null
+++ b/include/linux/ssb/ssb_embedded.h
@@ -0,0 +1,18 @@
+#ifndef LINUX_SSB_EMBEDDED_H_
+#define LINUX_SSB_EMBEDDED_H_
+
+#include <linux/types.h>
+#include <linux/ssb/ssb.h>
+
+
+extern int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks);
+
+/* Generic GPIO API */
+u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask);
+u32 ssb_gpio_out(struct ssb_bus *bus, u32 mask, u32 value);
+u32 ssb_gpio_outen(struct ssb_bus *bus, u32 mask, u32 value);
+u32 ssb_gpio_control(struct ssb_bus *bus, u32 mask, u32 value);
+u32 ssb_gpio_intmask(struct ssb_bus *bus, u32 mask, u32 value);
+u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value);
+
+#endif /* LINUX_SSB_EMBEDDED_H_ */
diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h
index 75370ec..9f1b4b4 100644
--- a/include/linux/vmstat.h
+++ b/include/linux/vmstat.h
@@ -246,8 +246,7 @@
static inline void __dec_zone_page_state(struct page *page,
enum zone_stat_item item)
{
- atomic_long_dec(&page_zone(page)->vm_stat[item]);
- atomic_long_dec(&vm_stat[item]);
+ __dec_zone_state(page_zone(page), item);
}
/*
diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h
index c17fa1f..6512d85 100644
--- a/include/net/ip6_tunnel.h
+++ b/include/net/ip6_tunnel.h
@@ -14,8 +14,6 @@
/* capable of receiving packets */
#define IP6_TNL_F_CAP_RCV 0x20000
-#define IP6_TNL_MAX 128
-
/* IPv6 tunnel */
struct ip6_tnl {
diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h
index 9462d6a..9619b9d 100644
--- a/include/net/sctp/user.h
+++ b/include/net/sctp/user.h
@@ -411,6 +411,7 @@
__u8 sctp_shutdown_event;
__u8 sctp_partial_delivery_event;
__u8 sctp_adaptation_layer_event;
+ __u8 sctp_authentication_event;
};
/*
@@ -587,7 +588,7 @@
* endpoint requires the peer to use.
*/
struct sctp_hmacalgo {
- __u16 shmac_num_idents;
+ __u32 shmac_num_idents;
__u16 shmac_idents[];
};
@@ -600,7 +601,7 @@
struct sctp_authkey {
sctp_assoc_t sca_assoc_id;
__u16 sca_keynumber;
- __u16 sca_keylen;
+ __u16 sca_keylength;
__u8 sca_key[];
};
@@ -693,8 +694,9 @@
* the peer requires to be received authenticated only.
*/
struct sctp_authchunks {
- sctp_assoc_t gauth_assoc_id;
- uint8_t gauth_chunks[];
+ sctp_assoc_t gauth_assoc_id;
+ __u32 gauth_number_of_chunks;
+ uint8_t gauth_chunks[];
};
/*
diff --git a/kernel/audit.c b/kernel/audit.c
index 2eeea9a..10c4930 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -170,7 +170,9 @@
printk(KERN_ERR "audit: %s\n", message);
break;
case AUDIT_FAIL_PANIC:
- panic("audit: %s\n", message);
+ /* test audit_pid since printk is always losey, why bother? */
+ if (audit_pid)
+ panic("audit: %s\n", message);
break;
}
}
@@ -352,6 +354,7 @@
if (err < 0) {
BUG_ON(err != -ECONNREFUSED); /* Shoudn't happen */
printk(KERN_ERR "audit: *NO* daemon at audit_pid=%d\n", audit_pid);
+ audit_log_lost("auditd dissapeared\n");
audit_pid = 0;
}
} else {
@@ -1350,17 +1353,19 @@
if (!audit_rate_check()) {
audit_log_lost("rate limit exceeded");
} else {
+ struct nlmsghdr *nlh = nlmsg_hdr(ab->skb);
if (audit_pid) {
- struct nlmsghdr *nlh = nlmsg_hdr(ab->skb);
nlh->nlmsg_len = ab->skb->len - NLMSG_SPACE(0);
skb_queue_tail(&audit_skb_queue, ab->skb);
ab->skb = NULL;
wake_up_interruptible(&kauditd_wait);
- } else if (printk_ratelimit()) {
- struct nlmsghdr *nlh = nlmsg_hdr(ab->skb);
- printk(KERN_NOTICE "type=%d %s\n", nlh->nlmsg_type, ab->skb->data + NLMSG_SPACE(0));
- } else {
- audit_log_lost("printk limit exceeded\n");
+ } else if (nlh->nlmsg_type != AUDIT_EOE) {
+ if (printk_ratelimit()) {
+ printk(KERN_NOTICE "type=%d %s\n",
+ nlh->nlmsg_type,
+ ab->skb->data + NLMSG_SPACE(0));
+ } else
+ audit_log_lost("printk limit exceeded\n");
}
}
audit_buffer_free(ab);
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 2087d6d..782262e 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -1070,7 +1070,7 @@
* so we can be sure nothing was lost.
*/
if ((i == 0) && (too_long))
- audit_log_format(*ab, "a%d_len=%ld ", arg_num,
+ audit_log_format(*ab, "a%d_len=%zu ", arg_num,
has_cntl ? 2*len : len);
/*
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 3574379..81a4e4a 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -779,6 +779,10 @@
* parallel walking of the hash-list safe:
*/
list_add_tail_rcu(&class->hash_entry, hash_head);
+ /*
+ * Add it to the global list of classes:
+ */
+ list_add_tail_rcu(&class->lock_entry, &all_lock_classes);
if (verbose(class)) {
graph_unlock();
@@ -2282,10 +2286,6 @@
return 0;
break;
case LOCK_USED:
- /*
- * Add it to the global list of classes:
- */
- list_add_tail_rcu(&this->class->lock_entry, &all_lock_classes);
debug_atomic_dec(&nr_unused_locks);
break;
default:
diff --git a/kernel/printk.c b/kernel/printk.c
index bee3610..9adc2a4 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -666,7 +666,7 @@
}
/* Emit the output into the temporary buffer */
printed_len += vscnprintf(printk_buf + printed_len,
- sizeof(printk_buf), fmt, args);
+ sizeof(printk_buf) - printed_len, fmt, args);
/*
* Copy the output into log_buf. If the caller didn't provide
diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c
index 987cfb7..e951701 100644
--- a/kernel/rcupreempt.c
+++ b/kernel/rcupreempt.c
@@ -23,6 +23,10 @@
* to Suparna Bhattacharya for pushing me completely away
* from atomic instructions on the read side.
*
+ * - Added handling of Dynamic Ticks
+ * Copyright 2007 - Paul E. Mckenney <paulmck@us.ibm.com>
+ * - Steven Rostedt <srostedt@redhat.com>
+ *
* Papers: http://www.rdrop.com/users/paulmck/RCU
*
* Design Document: http://lwn.net/Articles/253651/
@@ -409,6 +413,212 @@
}
}
+#ifdef CONFIG_NO_HZ
+
+DEFINE_PER_CPU(long, dynticks_progress_counter) = 1;
+static DEFINE_PER_CPU(long, rcu_dyntick_snapshot);
+static DEFINE_PER_CPU(int, rcu_update_flag);
+
+/**
+ * rcu_irq_enter - Called from Hard irq handlers and NMI/SMI.
+ *
+ * If the CPU was idle with dynamic ticks active, this updates the
+ * dynticks_progress_counter to let the RCU handling know that the
+ * CPU is active.
+ */
+void rcu_irq_enter(void)
+{
+ int cpu = smp_processor_id();
+
+ if (per_cpu(rcu_update_flag, cpu))
+ per_cpu(rcu_update_flag, cpu)++;
+
+ /*
+ * Only update if we are coming from a stopped ticks mode
+ * (dynticks_progress_counter is even).
+ */
+ if (!in_interrupt() &&
+ (per_cpu(dynticks_progress_counter, cpu) & 0x1) == 0) {
+ /*
+ * The following might seem like we could have a race
+ * with NMI/SMIs. But this really isn't a problem.
+ * Here we do a read/modify/write, and the race happens
+ * when an NMI/SMI comes in after the read and before
+ * the write. But NMI/SMIs will increment this counter
+ * twice before returning, so the zero bit will not
+ * be corrupted by the NMI/SMI which is the most important
+ * part.
+ *
+ * The only thing is that we would bring back the counter
+ * to a postion that it was in during the NMI/SMI.
+ * But the zero bit would be set, so the rest of the
+ * counter would again be ignored.
+ *
+ * On return from the IRQ, the counter may have the zero
+ * bit be 0 and the counter the same as the return from
+ * the NMI/SMI. If the state machine was so unlucky to
+ * see that, it still doesn't matter, since all
+ * RCU read-side critical sections on this CPU would
+ * have already completed.
+ */
+ per_cpu(dynticks_progress_counter, cpu)++;
+ /*
+ * The following memory barrier ensures that any
+ * rcu_read_lock() primitives in the irq handler
+ * are seen by other CPUs to follow the above
+ * increment to dynticks_progress_counter. This is
+ * required in order for other CPUs to correctly
+ * determine when it is safe to advance the RCU
+ * grace-period state machine.
+ */
+ smp_mb(); /* see above block comment. */
+ /*
+ * Since we can't determine the dynamic tick mode from
+ * the dynticks_progress_counter after this routine,
+ * we use a second flag to acknowledge that we came
+ * from an idle state with ticks stopped.
+ */
+ per_cpu(rcu_update_flag, cpu)++;
+ /*
+ * If we take an NMI/SMI now, they will also increment
+ * the rcu_update_flag, and will not update the
+ * dynticks_progress_counter on exit. That is for
+ * this IRQ to do.
+ */
+ }
+}
+
+/**
+ * rcu_irq_exit - Called from exiting Hard irq context.
+ *
+ * If the CPU was idle with dynamic ticks active, update the
+ * dynticks_progress_counter to put let the RCU handling be
+ * aware that the CPU is going back to idle with no ticks.
+ */
+void rcu_irq_exit(void)
+{
+ int cpu = smp_processor_id();
+
+ /*
+ * rcu_update_flag is set if we interrupted the CPU
+ * when it was idle with ticks stopped.
+ * Once this occurs, we keep track of interrupt nesting
+ * because a NMI/SMI could also come in, and we still
+ * only want the IRQ that started the increment of the
+ * dynticks_progress_counter to be the one that modifies
+ * it on exit.
+ */
+ if (per_cpu(rcu_update_flag, cpu)) {
+ if (--per_cpu(rcu_update_flag, cpu))
+ return;
+
+ /* This must match the interrupt nesting */
+ WARN_ON(in_interrupt());
+
+ /*
+ * If an NMI/SMI happens now we are still
+ * protected by the dynticks_progress_counter being odd.
+ */
+
+ /*
+ * The following memory barrier ensures that any
+ * rcu_read_unlock() primitives in the irq handler
+ * are seen by other CPUs to preceed the following
+ * increment to dynticks_progress_counter. This
+ * is required in order for other CPUs to determine
+ * when it is safe to advance the RCU grace-period
+ * state machine.
+ */
+ smp_mb(); /* see above block comment. */
+ per_cpu(dynticks_progress_counter, cpu)++;
+ WARN_ON(per_cpu(dynticks_progress_counter, cpu) & 0x1);
+ }
+}
+
+static void dyntick_save_progress_counter(int cpu)
+{
+ per_cpu(rcu_dyntick_snapshot, cpu) =
+ per_cpu(dynticks_progress_counter, cpu);
+}
+
+static inline int
+rcu_try_flip_waitack_needed(int cpu)
+{
+ long curr;
+ long snap;
+
+ curr = per_cpu(dynticks_progress_counter, cpu);
+ snap = per_cpu(rcu_dyntick_snapshot, cpu);
+ smp_mb(); /* force ordering with cpu entering/leaving dynticks. */
+
+ /*
+ * If the CPU remained in dynticks mode for the entire time
+ * and didn't take any interrupts, NMIs, SMIs, or whatever,
+ * then it cannot be in the middle of an rcu_read_lock(), so
+ * the next rcu_read_lock() it executes must use the new value
+ * of the counter. So we can safely pretend that this CPU
+ * already acknowledged the counter.
+ */
+
+ if ((curr == snap) && ((curr & 0x1) == 0))
+ return 0;
+
+ /*
+ * If the CPU passed through or entered a dynticks idle phase with
+ * no active irq handlers, then, as above, we can safely pretend
+ * that this CPU already acknowledged the counter.
+ */
+
+ if ((curr - snap) > 2 || (snap & 0x1) == 0)
+ return 0;
+
+ /* We need this CPU to explicitly acknowledge the counter flip. */
+
+ return 1;
+}
+
+static inline int
+rcu_try_flip_waitmb_needed(int cpu)
+{
+ long curr;
+ long snap;
+
+ curr = per_cpu(dynticks_progress_counter, cpu);
+ snap = per_cpu(rcu_dyntick_snapshot, cpu);
+ smp_mb(); /* force ordering with cpu entering/leaving dynticks. */
+
+ /*
+ * If the CPU remained in dynticks mode for the entire time
+ * and didn't take any interrupts, NMIs, SMIs, or whatever,
+ * then it cannot have executed an RCU read-side critical section
+ * during that time, so there is no need for it to execute a
+ * memory barrier.
+ */
+
+ if ((curr == snap) && ((curr & 0x1) == 0))
+ return 0;
+
+ /*
+ * If the CPU either entered or exited an outermost interrupt,
+ * SMI, NMI, or whatever handler, then we know that it executed
+ * a memory barrier when doing so. So we don't need another one.
+ */
+ if (curr != snap)
+ return 0;
+
+ /* We need the CPU to execute a memory barrier. */
+
+ return 1;
+}
+
+#else /* !CONFIG_NO_HZ */
+
+# define dyntick_save_progress_counter(cpu) do { } while (0)
+# define rcu_try_flip_waitack_needed(cpu) (1)
+# define rcu_try_flip_waitmb_needed(cpu) (1)
+
+#endif /* CONFIG_NO_HZ */
+
/*
* Get here when RCU is idle. Decide whether we need to
* move out of idle state, and return non-zero if so.
@@ -447,8 +657,10 @@
/* Now ask each CPU for acknowledgement of the flip. */
- for_each_cpu_mask(cpu, rcu_cpu_online_map)
+ for_each_cpu_mask(cpu, rcu_cpu_online_map) {
per_cpu(rcu_flip_flag, cpu) = rcu_flipped;
+ dyntick_save_progress_counter(cpu);
+ }
return 1;
}
@@ -464,7 +676,8 @@
RCU_TRACE_ME(rcupreempt_trace_try_flip_a1);
for_each_cpu_mask(cpu, rcu_cpu_online_map)
- if (per_cpu(rcu_flip_flag, cpu) != rcu_flip_seen) {
+ if (rcu_try_flip_waitack_needed(cpu) &&
+ per_cpu(rcu_flip_flag, cpu) != rcu_flip_seen) {
RCU_TRACE_ME(rcupreempt_trace_try_flip_ae1);
return 0;
}
@@ -509,8 +722,10 @@
smp_mb(); /* ^^^^^^^^^^^^ */
/* Call for a memory barrier from each CPU. */
- for_each_cpu_mask(cpu, rcu_cpu_online_map)
+ for_each_cpu_mask(cpu, rcu_cpu_online_map) {
per_cpu(rcu_mb_flag, cpu) = rcu_mb_needed;
+ dyntick_save_progress_counter(cpu);
+ }
RCU_TRACE_ME(rcupreempt_trace_try_flip_z2);
return 1;
@@ -528,7 +743,8 @@
RCU_TRACE_ME(rcupreempt_trace_try_flip_m1);
for_each_cpu_mask(cpu, rcu_cpu_online_map)
- if (per_cpu(rcu_mb_flag, cpu) != rcu_mb_done) {
+ if (rcu_try_flip_waitmb_needed(cpu) &&
+ per_cpu(rcu_mb_flag, cpu) != rcu_mb_done) {
RCU_TRACE_ME(rcupreempt_trace_try_flip_me1);
return 0;
}
@@ -702,8 +918,9 @@
* fix.
*/
+ local_irq_save(flags);
rdp = RCU_DATA_ME();
- spin_lock_irqsave(&rdp->lock, flags);
+ spin_lock(&rdp->lock);
*rdp->nexttail = list;
if (list)
rdp->nexttail = tail;
@@ -735,9 +952,11 @@
{
unsigned long flags;
struct rcu_head *next, *list;
- struct rcu_data *rdp = RCU_DATA_ME();
+ struct rcu_data *rdp;
- spin_lock_irqsave(&rdp->lock, flags);
+ local_irq_save(flags);
+ rdp = RCU_DATA_ME();
+ spin_lock(&rdp->lock);
list = rdp->donelist;
if (list == NULL) {
spin_unlock_irqrestore(&rdp->lock, flags);
diff --git a/kernel/sched.c b/kernel/sched.c
index b387a8d..f06950c 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -668,6 +668,8 @@
*/
unsigned int sysctl_sched_rt_period = 1000000;
+static __read_mostly int scheduler_running;
+
/*
* part of the period that we allow rt tasks to run in us.
* default: 0.95s
@@ -689,14 +691,16 @@
unsigned long flags;
struct rq *rq;
- local_irq_save(flags);
- rq = cpu_rq(cpu);
/*
* Only call sched_clock() if the scheduler has already been
* initialized (some code might call cpu_clock() very early):
*/
- if (rq->idle)
- update_rq_clock(rq);
+ if (unlikely(!scheduler_running))
+ return 0;
+
+ local_irq_save(flags);
+ rq = cpu_rq(cpu);
+ update_rq_clock(rq);
now = rq->clock;
local_irq_restore(flags);
@@ -3885,7 +3889,7 @@
asmlinkage void __sched schedule(void)
{
struct task_struct *prev, *next;
- long *switch_count;
+ unsigned long *switch_count;
struct rq *rq;
int cpu;
@@ -7284,6 +7288,8 @@
* During early bootup we pretend to be a normal task:
*/
current->sched_class = &fair_sched_class;
+
+ scheduler_running = 1;
}
#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 6c091d6..c8e6492 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -202,17 +202,12 @@
static inline struct sched_entity *__pick_last_entity(struct cfs_rq *cfs_rq)
{
- struct rb_node **link = &cfs_rq->tasks_timeline.rb_node;
- struct sched_entity *se = NULL;
- struct rb_node *parent;
+ struct rb_node *last = rb_last(&cfs_rq->tasks_timeline);
- while (*link) {
- parent = *link;
- se = rb_entry(parent, struct sched_entity, run_node);
- link = &parent->rb_right;
- }
+ if (!last)
+ return NULL;
- return se;
+ return rb_entry(last, struct sched_entity, run_node);
}
/**************************************************************
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 5b3aea5..31e9f2a 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -313,6 +313,7 @@
/* Make sure that timer wheel updates are propagated */
if (!in_interrupt() && idle_cpu(smp_processor_id()) && !need_resched())
tick_nohz_stop_sched_tick();
+ rcu_irq_exit();
#endif
preempt_enable_no_resched();
}
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index 7c2da88..01b6522 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -216,26 +216,27 @@
/* initialize timestamp */
touch_softlockup_watchdog();
+ set_current_state(TASK_INTERRUPTIBLE);
/*
* Run briefly once per second to reset the softlockup timestamp.
* If this gets delayed for more than 60 seconds then the
* debug-printout triggers in softlockup_tick().
*/
while (!kthread_should_stop()) {
- set_current_state(TASK_INTERRUPTIBLE);
touch_softlockup_watchdog();
schedule();
if (kthread_should_stop())
break;
- if (this_cpu != check_cpu)
- continue;
+ if (this_cpu == check_cpu) {
+ if (sysctl_hung_task_timeout_secs)
+ check_hung_uninterruptible_tasks(this_cpu);
+ }
- if (sysctl_hung_task_timeout_secs)
- check_hung_uninterruptible_tasks(this_cpu);
-
+ set_current_state(TASK_INTERRUPTIBLE);
}
+ __set_current_state(TASK_RUNNING);
return 0;
}
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index fa9bb73..2968298 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -282,6 +282,7 @@
ts->idle_tick = ts->sched_timer.expires;
ts->tick_stopped = 1;
ts->idle_jiffies = last_jiffies;
+ rcu_enter_nohz();
}
/*
@@ -375,6 +376,8 @@
return;
}
+ rcu_exit_nohz();
+
/* Update jiffies first */
select_nohz_load_balancer(0);
now = ktime_get();
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index fc60c6d..77f04e4 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -366,8 +366,7 @@
{
struct net_device_stats *stats = &dev->stats;
struct vlan_ethhdr *veth = (struct vlan_ethhdr *)(skb->data);
- DECLARE_MAC_BUF(mac);
- DECLARE_MAC_BUF(mac2);
+
/* Handle non-VLAN frames if they are sent to us, for example by DHCP.
*
* NOTE: THIS ASSUMES DIX ETHERNET, SPECIFICALLY NOT SUPPORTING
@@ -405,8 +404,11 @@
pr_debug("%s: about to send skb: %p to dev: %s\n",
__FUNCTION__, skb, skb->dev->name);
- pr_debug(" %s %s %4hx %4hx %4hx\n",
- print_mac(mac, veth->h_dest), print_mac(mac2, veth->h_source),
+ pr_debug(" " MAC_FMT " " MAC_FMT " %4hx %4hx %4hx\n",
+ veth->h_dest[0], veth->h_dest[1], veth->h_dest[2],
+ veth->h_dest[3], veth->h_dest[4], veth->h_dest[5],
+ veth->h_source[0], veth->h_source[1], veth->h_source[2],
+ veth->h_source[3], veth->h_source[4], veth->h_source[5],
veth->h_vlan_proto, veth->h_vlan_TCI,
veth->h_vlan_encapsulated_proto);
diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c
index a0ec479..146cfb0 100644
--- a/net/8021q/vlanproc.c
+++ b/net/8021q/vlanproc.c
@@ -161,11 +161,10 @@
if (!proc_vlan_dir)
goto err;
- proc_vlan_conf = create_proc_entry(name_conf, S_IFREG|S_IRUSR|S_IWUSR,
- proc_vlan_dir);
+ proc_vlan_conf = proc_create(name_conf, S_IFREG|S_IRUSR|S_IWUSR,
+ proc_vlan_dir, &vlan_fops);
if (!proc_vlan_conf)
goto err;
- proc_vlan_conf->proc_fops = &vlan_fops;
return 0;
err:
@@ -182,13 +181,11 @@
{
struct vlan_dev_info *dev_info = vlan_dev_info(vlandev);
- dev_info->dent = create_proc_entry(vlandev->name,
- S_IFREG|S_IRUSR|S_IWUSR,
- proc_vlan_dir);
+ dev_info->dent = proc_create(vlandev->name, S_IFREG|S_IRUSR|S_IWUSR,
+ proc_vlan_dir, &vlandev_fops);
if (!dev_info->dent)
return -ENOBUFS;
- dev_info->dent->proc_fops = &vlandev_fops;
dev_info->dent->data = vlandev;
return 0;
}
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index 9e3d81c..de7a9f5 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -110,7 +110,7 @@
}
for (count = old_max; count < c->max_tag; count++) {
c->reqs[count].status = REQ_STATUS_IDLE;
- c->reqs[count].wq = kmalloc(sizeof(wait_queue_t),
+ c->reqs[count].wq = kmalloc(sizeof(wait_queue_head_t),
GFP_ATOMIC);
if (!c->reqs[count].wq) {
printk(KERN_ERR "Couldn't grow tag array\n");
diff --git a/net/appletalk/atalk_proc.c b/net/appletalk/atalk_proc.c
index 8e8dcfd..162199a 100644
--- a/net/appletalk/atalk_proc.c
+++ b/net/appletalk/atalk_proc.c
@@ -283,25 +283,24 @@
goto out;
atalk_proc_dir->owner = THIS_MODULE;
- p = create_proc_entry("interface", S_IRUGO, atalk_proc_dir);
+ p = proc_create("interface", S_IRUGO, atalk_proc_dir,
+ &atalk_seq_interface_fops);
if (!p)
goto out_interface;
- p->proc_fops = &atalk_seq_interface_fops;
- p = create_proc_entry("route", S_IRUGO, atalk_proc_dir);
+ p = proc_create("route", S_IRUGO, atalk_proc_dir,
+ &atalk_seq_route_fops);
if (!p)
goto out_route;
- p->proc_fops = &atalk_seq_route_fops;
- p = create_proc_entry("socket", S_IRUGO, atalk_proc_dir);
+ p = proc_create("socket", S_IRUGO, atalk_proc_dir,
+ &atalk_seq_socket_fops);
if (!p)
goto out_socket;
- p->proc_fops = &atalk_seq_socket_fops;
- p = create_proc_entry("arp", S_IRUGO, atalk_proc_dir);
+ p = proc_create("arp", S_IRUGO, atalk_proc_dir, &atalk_seq_arp_fops);
if (!p)
goto out_arp;
- p->proc_fops = &atalk_seq_arp_fops;
rc = 0;
out:
diff --git a/net/atm/br2684.c b/net/atm/br2684.c
index 574d9a9..1b22806 100644
--- a/net/atm/br2684.c
+++ b/net/atm/br2684.c
@@ -742,9 +742,9 @@
{
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *p;
- if ((p = create_proc_entry("br2684", 0, atm_proc_root)) == NULL)
+ p = proc_create("br2684", 0, atm_proc_root, &br2684_proc_ops);
+ if (p == NULL)
return -ENOMEM;
- p->proc_fops = &br2684_proc_ops;
#endif
register_atm_ioctl(&br2684_ioctl_ops);
return 0;
diff --git a/net/atm/clip.c b/net/atm/clip.c
index 86b885e..d30167c 100644
--- a/net/atm/clip.c
+++ b/net/atm/clip.c
@@ -962,9 +962,7 @@
{
struct proc_dir_entry *p;
- p = create_proc_entry("arp", S_IRUGO, atm_proc_root);
- if (p)
- p->proc_fops = &arp_seq_fops;
+ p = proc_create("arp", S_IRUGO, atm_proc_root, &arp_seq_fops);
}
#endif
diff --git a/net/atm/lec.c b/net/atm/lec.c
index 1a8c4c6..0e450d1 100644
--- a/net/atm/lec.c
+++ b/net/atm/lec.c
@@ -1249,9 +1249,7 @@
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *p;
- p = create_proc_entry("lec", S_IRUGO, atm_proc_root);
- if (p)
- p->proc_fops = &lec_seq_fops;
+ p = proc_create("lec", S_IRUGO, atm_proc_root, &lec_seq_fops);
#endif
register_atm_ioctl(&lane_ioctl_ops);
diff --git a/net/atm/mpoa_proc.c b/net/atm/mpoa_proc.c
index 91f3ffc..4990541 100644
--- a/net/atm/mpoa_proc.c
+++ b/net/atm/mpoa_proc.c
@@ -276,12 +276,11 @@
{
struct proc_dir_entry *p;
- p = create_proc_entry(STAT_FILE_NAME, 0, atm_proc_root);
+ p = proc_create(STAT_FILE_NAME, 0, atm_proc_root, &mpc_file_operations);
if (!p) {
printk(KERN_ERR "Unable to initialize /proc/atm/%s\n", STAT_FILE_NAME);
return -ENOMEM;
}
- p->proc_fops = &mpc_file_operations;
p->owner = THIS_MODULE;
return 0;
}
diff --git a/net/atm/proc.c b/net/atm/proc.c
index 4912511..e9693ae 100644
--- a/net/atm/proc.c
+++ b/net/atm/proc.c
@@ -435,11 +435,11 @@
goto err_out;
sprintf(dev->proc_name,"%s:%d",dev->type, dev->number);
- dev->proc_entry = create_proc_entry(dev->proc_name, 0, atm_proc_root);
+ dev->proc_entry = proc_create(dev->proc_name, 0, atm_proc_root,
+ &proc_atm_dev_ops);
if (!dev->proc_entry)
goto err_free_name;
dev->proc_entry->data = dev;
- dev->proc_entry->proc_fops = &proc_atm_dev_ops;
dev->proc_entry->owner = THIS_MODULE;
return 0;
err_free_name:
@@ -492,10 +492,10 @@
for (e = atm_proc_ents; e->name; e++) {
struct proc_dir_entry *dirent;
- dirent = create_proc_entry(e->name, S_IRUGO, atm_proc_root);
+ dirent = proc_create(e->name, S_IRUGO,
+ atm_proc_root, e->proc_fops);
if (!dirent)
goto err_out_remove;
- dirent->proc_fops = e->proc_fops;
dirent->owner = THIS_MODULE;
e->dirent = dirent;
}
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index a8811c0..7c5459c8 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -417,6 +417,8 @@
l2cap_sock_kill(sk);
}
+ del_timer_sync(&conn->info_timer);
+
hcon->l2cap_data = NULL;
kfree(conn);
}
diff --git a/net/bridge/netfilter/ebt_dnat.c b/net/bridge/netfilter/ebt_dnat.c
index e700cbf..ca64c1c 100644
--- a/net/bridge/netfilter/ebt_dnat.c
+++ b/net/bridge/netfilter/ebt_dnat.c
@@ -20,8 +20,8 @@
{
const struct ebt_nat_info *info = data;
- if (skb_make_writable(skb, 0))
- return NF_DROP;
+ if (!skb_make_writable(skb, 0))
+ return EBT_DROP;
memcpy(eth_hdr(skb)->h_dest, info->mac, ETH_ALEN);
return info->target;
diff --git a/net/bridge/netfilter/ebt_redirect.c b/net/bridge/netfilter/ebt_redirect.c
index bfdf2fb..b8afe85 100644
--- a/net/bridge/netfilter/ebt_redirect.c
+++ b/net/bridge/netfilter/ebt_redirect.c
@@ -21,8 +21,8 @@
{
const struct ebt_redirect_info *info = data;
- if (skb_make_writable(skb, 0))
- return NF_DROP;
+ if (!skb_make_writable(skb, 0))
+ return EBT_DROP;
if (hooknr != NF_BR_BROUTING)
memcpy(eth_hdr(skb)->h_dest,
diff --git a/net/bridge/netfilter/ebt_snat.c b/net/bridge/netfilter/ebt_snat.c
index e252dab..5425333 100644
--- a/net/bridge/netfilter/ebt_snat.c
+++ b/net/bridge/netfilter/ebt_snat.c
@@ -22,8 +22,8 @@
{
const struct ebt_nat_info *info = data;
- if (skb_make_writable(skb, 0))
- return NF_DROP;
+ if (!skb_make_writable(skb, 0))
+ return EBT_DROP;
memcpy(eth_hdr(skb)->h_source, info->mac, ETH_ALEN);
if (!(info->target & NAT_ARP_BIT) &&
diff --git a/net/core/dev.c b/net/core/dev.c
index 908f07c..fcdf03c 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2900,7 +2900,7 @@
}
}
- da = kmalloc(sizeof(*da), GFP_ATOMIC);
+ da = kzalloc(sizeof(*da), GFP_ATOMIC);
if (da == NULL)
return -ENOMEM;
memcpy(da->da_addr, addr, alen);
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index a16cf1e..aef0153 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -358,11 +358,12 @@
{
struct neighbour *n;
int key_len = tbl->key_len;
- u32 hash_val = tbl->hash(pkey, dev);
+ u32 hash_val;
NEIGH_CACHE_STAT_INC(tbl, lookups);
read_lock_bh(&tbl->lock);
+ hash_val = tbl->hash(pkey, dev);
for (n = tbl->hash_buckets[hash_val & tbl->hash_mask]; n; n = n->next) {
if (dev == n->dev && !memcmp(n->primary_key, pkey, key_len)) {
neigh_hold(n);
@@ -379,11 +380,12 @@
{
struct neighbour *n;
int key_len = tbl->key_len;
- u32 hash_val = tbl->hash(pkey, NULL);
+ u32 hash_val;
NEIGH_CACHE_STAT_INC(tbl, lookups);
read_lock_bh(&tbl->lock);
+ hash_val = tbl->hash(pkey, NULL);
for (n = tbl->hash_buckets[hash_val & tbl->hash_mask]; n; n = n->next) {
if (!memcmp(n->primary_key, pkey, key_len) &&
(net == n->dev->nd_net)) {
@@ -507,6 +509,7 @@
if (tbl->pconstructor && tbl->pconstructor(n)) {
if (dev)
dev_put(dev);
+ release_net(net);
kfree(n);
n = NULL;
goto out;
@@ -1386,10 +1389,10 @@
panic("cannot create neighbour cache statistics");
#ifdef CONFIG_PROC_FS
- tbl->pde = create_proc_entry(tbl->id, 0, init_net.proc_net_stat);
+ tbl->pde = proc_create(tbl->id, 0, init_net.proc_net_stat,
+ &neigh_stat_seq_fops);
if (!tbl->pde)
panic("cannot create neighbour proc dir entry");
- tbl->pde->proc_fops = &neigh_stat_seq_fops;
tbl->pde->data = tbl;
#endif
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index bfcdfae..20e63b3 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -3570,14 +3570,14 @@
if (err)
goto out1;
- pkt_dev->entry = create_proc_entry(ifname, 0600, pg_proc_dir);
+ pkt_dev->entry = proc_create(ifname, 0600,
+ pg_proc_dir, &pktgen_if_fops);
if (!pkt_dev->entry) {
printk(KERN_ERR "pktgen: cannot create %s/%s procfs entry.\n",
PG_PROC_DIR, ifname);
err = -EINVAL;
goto out2;
}
- pkt_dev->entry->proc_fops = &pktgen_if_fops;
pkt_dev->entry->data = pkt_dev;
#ifdef CONFIG_XFRM
pkt_dev->ipsmode = XFRM_MODE_TRANSPORT;
@@ -3628,7 +3628,7 @@
kthread_bind(p, cpu);
t->tsk = p;
- pe = create_proc_entry(t->tsk->comm, 0600, pg_proc_dir);
+ pe = proc_create(t->tsk->comm, 0600, pg_proc_dir, &pktgen_thread_fops);
if (!pe) {
printk(KERN_ERR "pktgen: cannot create %s/%s procfs entry.\n",
PG_PROC_DIR, t->tsk->comm);
@@ -3638,7 +3638,6 @@
return -EINVAL;
}
- pe->proc_fops = &pktgen_thread_fops;
pe->data = t;
wake_up_process(p);
@@ -3709,7 +3708,7 @@
return -ENODEV;
pg_proc_dir->owner = THIS_MODULE;
- pe = create_proc_entry(PGCTRL, 0600, pg_proc_dir);
+ pe = proc_create(PGCTRL, 0600, pg_proc_dir, &pktgen_fops);
if (pe == NULL) {
printk(KERN_ERR "pktgen: ERROR: cannot create %s "
"procfs entry.\n", PGCTRL);
@@ -3717,7 +3716,6 @@
return -EINVAL;
}
- pe->proc_fops = &pktgen_fops;
pe->data = NULL;
/* Register us to receive netdevice events */
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 61ac8d0..2bd9c5f 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -689,10 +689,12 @@
[IFLA_BROADCAST] = { .type = NLA_BINARY, .len = MAX_ADDR_LEN },
[IFLA_MAP] = { .len = sizeof(struct rtnl_link_ifmap) },
[IFLA_MTU] = { .type = NLA_U32 },
+ [IFLA_LINK] = { .type = NLA_U32 },
[IFLA_TXQLEN] = { .type = NLA_U32 },
[IFLA_WEIGHT] = { .type = NLA_U32 },
[IFLA_OPERSTATE] = { .type = NLA_U8 },
[IFLA_LINKMODE] = { .type = NLA_U8 },
+ [IFLA_LINKINFO] = { .type = NLA_NESTED },
[IFLA_NET_NS_PID] = { .type = NLA_U32 },
};
@@ -720,6 +722,21 @@
return net;
}
+static int validate_linkmsg(struct net_device *dev, struct nlattr *tb[])
+{
+ if (dev) {
+ if (tb[IFLA_ADDRESS] &&
+ nla_len(tb[IFLA_ADDRESS]) < dev->addr_len)
+ return -EINVAL;
+
+ if (tb[IFLA_BROADCAST] &&
+ nla_len(tb[IFLA_BROADCAST]) < dev->addr_len)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int do_setlink(struct net_device *dev, struct ifinfomsg *ifm,
struct nlattr **tb, char *ifname, int modified)
{
@@ -892,12 +909,7 @@
goto errout;
}
- if (tb[IFLA_ADDRESS] &&
- nla_len(tb[IFLA_ADDRESS]) < dev->addr_len)
- goto errout_dev;
-
- if (tb[IFLA_BROADCAST] &&
- nla_len(tb[IFLA_BROADCAST]) < dev->addr_len)
+ if ((err = validate_linkmsg(dev, tb)) < 0)
goto errout_dev;
err = do_setlink(dev, ifm, tb, ifname, 0);
@@ -1018,6 +1030,9 @@
else
dev = NULL;
+ if ((err = validate_linkmsg(dev, tb)) < 0)
+ return err;
+
if (tb[IFLA_LINKINFO]) {
err = nla_parse_nested(linkinfo, IFLA_INFO_MAX,
tb[IFLA_LINKINFO], ifla_info_policy);
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index f282b26..87490f7 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -752,6 +752,7 @@
inet_del_ifa(in_dev, ifap, 0);
ifa->ifa_broadcast = 0;
ifa->ifa_anycast = 0;
+ ifa->ifa_scope = 0;
}
ifa->ifa_address = ifa->ifa_local = sin->sin_addr.s_addr;
diff --git a/net/ipv4/fib_hash.c b/net/ipv4/fib_hash.c
index 76b9c68..8d58d85 100644
--- a/net/ipv4/fib_hash.c
+++ b/net/ipv4/fib_hash.c
@@ -372,7 +372,8 @@
static int fn_hash_insert(struct fib_table *tb, struct fib_config *cfg)
{
struct fn_hash *table = (struct fn_hash *) tb->tb_data;
- struct fib_node *new_f, *f;
+ struct fib_node *new_f = NULL;
+ struct fib_node *f;
struct fib_alias *fa, *new_fa;
struct fn_zone *fz;
struct fib_info *fi;
@@ -496,7 +497,6 @@
err = -ENOBUFS;
- new_f = NULL;
if (!f) {
new_f = kmem_cache_zalloc(fn_hash_kmem, GFP_KERNEL);
if (new_f == NULL)
@@ -512,7 +512,7 @@
if (new_fa->fa_info != NULL) {
new_fa = kmem_cache_alloc(fn_alias_kmem, GFP_KERNEL);
if (new_fa == NULL)
- goto out_free_new_f;
+ goto out;
}
new_fa->fa_info = fi;
new_fa->fa_tos = tos;
@@ -540,9 +540,9 @@
&cfg->fc_nlinfo, 0);
return 0;
-out_free_new_f:
- kmem_cache_free(fn_hash_kmem, new_f);
out:
+ if (new_f)
+ kmem_cache_free(fn_hash_kmem, new_f);
fib_release_info(fi);
return err;
}
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 63f6917..e7821ba 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -259,35 +259,31 @@
if (parms->name[0])
strlcpy(name, parms->name, IFNAMSIZ);
- else {
- int i;
- for (i=1; i<100; i++) {
- sprintf(name, "gre%d", i);
- if (__dev_get_by_name(&init_net, name) == NULL)
- break;
- }
- if (i==100)
- goto failed;
- }
+ else
+ sprintf(name, "gre%%d");
dev = alloc_netdev(sizeof(*t), name, ipgre_tunnel_setup);
if (!dev)
return NULL;
+ if (strchr(name, '%')) {
+ if (dev_alloc_name(dev, name) < 0)
+ goto failed_free;
+ }
+
dev->init = ipgre_tunnel_init;
nt = netdev_priv(dev);
nt->parms = *parms;
- if (register_netdevice(dev) < 0) {
- free_netdev(dev);
- goto failed;
- }
+ if (register_netdevice(dev) < 0)
+ goto failed_free;
dev_hold(dev);
ipgre_tunnel_link(nt);
return nt;
-failed:
+failed_free:
+ free_netdev(dev);
return NULL;
}
diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c
index ae1f45f..58b60b2 100644
--- a/net/ipv4/ipcomp.c
+++ b/net/ipv4/ipcomp.c
@@ -108,8 +108,11 @@
const int cpu = get_cpu();
u8 *scratch = *per_cpu_ptr(ipcomp_scratches, cpu);
struct crypto_comp *tfm = *per_cpu_ptr(ipcd->tfms, cpu);
- int err = crypto_comp_compress(tfm, start, plen, scratch, &dlen);
+ int err;
+ local_bh_disable();
+ err = crypto_comp_compress(tfm, start, plen, scratch, &dlen);
+ local_bh_enable();
if (err)
goto out;
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index da28158..dbaed69 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -221,35 +221,31 @@
if (parms->name[0])
strlcpy(name, parms->name, IFNAMSIZ);
- else {
- int i;
- for (i=1; i<100; i++) {
- sprintf(name, "tunl%d", i);
- if (__dev_get_by_name(&init_net, name) == NULL)
- break;
- }
- if (i==100)
- goto failed;
- }
+ else
+ sprintf(name, "tunl%%d");
dev = alloc_netdev(sizeof(*t), name, ipip_tunnel_setup);
if (dev == NULL)
return NULL;
+ if (strchr(name, '%')) {
+ if (dev_alloc_name(dev, name) < 0)
+ goto failed_free;
+ }
+
nt = netdev_priv(dev);
dev->init = ipip_tunnel_init;
nt->parms = *parms;
- if (register_netdevice(dev) < 0) {
- free_netdev(dev);
- goto failed;
- }
+ if (register_netdevice(dev) < 0)
+ goto failed_free;
dev_hold(dev);
ipip_tunnel_link(nt);
return nt;
-failed:
+failed_free:
+ free_netdev(dev);
return NULL;
}
diff --git a/net/ipv4/netfilter/arpt_mangle.c b/net/ipv4/netfilter/arpt_mangle.c
index 45fa4e2..3f4222b 100644
--- a/net/ipv4/netfilter/arpt_mangle.c
+++ b/net/ipv4/netfilter/arpt_mangle.c
@@ -19,7 +19,7 @@
unsigned char *arpptr;
int pln, hln;
- if (skb_make_writable(skb, skb->len))
+ if (!skb_make_writable(skb, skb->len))
return NF_DROP;
arp = arp_hdr(skb);
diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c
index 6bda110..fe05da4 100644
--- a/net/ipv4/netfilter/ip_queue.c
+++ b/net/ipv4/netfilter/ip_queue.c
@@ -283,8 +283,8 @@
ipq_mangle_ipv4(ipq_verdict_msg_t *v, struct nf_queue_entry *e)
{
int diff;
- int err;
struct iphdr *user_iph = (struct iphdr *)v->payload;
+ struct sk_buff *nskb;
if (v->data_len < sizeof(*user_iph))
return 0;
@@ -296,14 +296,16 @@
if (v->data_len > 0xFFFF)
return -EINVAL;
if (diff > skb_tailroom(e->skb)) {
- err = pskb_expand_head(e->skb, 0,
+ nskb = skb_copy_expand(e->skb, 0,
diff - skb_tailroom(e->skb),
GFP_ATOMIC);
- if (err) {
+ if (!nskb) {
printk(KERN_WARNING "ip_queue: error "
- "in mangle, dropping packet: %d\n", -err);
- return err;
+ "in mangle, dropping packet\n");
+ return -ENOMEM;
}
+ kfree_skb(e->skb);
+ e->skb = nskb;
}
skb_put(e->skb, diff);
}
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 525787b..7b5e8e1 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -542,12 +542,11 @@
if (!pde)
goto err1;
- pde = create_proc_entry("rt_cache", S_IRUGO, net->proc_net_stat);
+ pde = proc_create("rt_cache", S_IRUGO,
+ net->proc_net_stat, &rt_cpu_seq_fops);
if (!pde)
goto err2;
- pde->proc_fops = &rt_cpu_seq_fops;
-
#ifdef CONFIG_NET_CLS_ROUTE
pde = create_proc_read_entry("rt_acct", 0, net->proc_net,
ip_rt_acct_read, NULL);
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index e40213d..101e0e7 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1557,6 +1557,7 @@
.fc_expires = expires,
.fc_dst_len = plen,
.fc_flags = RTF_UP | flags,
+ .fc_nlinfo.nl_net = &init_net,
};
ipv6_addr_copy(&cfg.fc_dst, pfx);
@@ -1583,6 +1584,7 @@
.fc_ifindex = dev->ifindex,
.fc_dst_len = 8,
.fc_flags = RTF_UP,
+ .fc_nlinfo.nl_net = &init_net,
};
ipv6_addr_set(&cfg.fc_dst, htonl(0xFF000000), 0, 0, 0);
@@ -1599,6 +1601,7 @@
.fc_ifindex = dev->ifindex,
.fc_dst_len = 96,
.fc_flags = RTF_UP | RTF_NONEXTHOP,
+ .fc_nlinfo.nl_net = &init_net,
};
/* prefix length - 96 bits "::d.d.d.d" */
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index cd94064..78f4388 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -229,33 +229,33 @@
char name[IFNAMSIZ];
int err;
- if (p->name[0]) {
+ if (p->name[0])
strlcpy(name, p->name, IFNAMSIZ);
- } else {
- int i;
- for (i = 1; i < IP6_TNL_MAX; i++) {
- sprintf(name, "ip6tnl%d", i);
- if (__dev_get_by_name(&init_net, name) == NULL)
- break;
- }
- if (i == IP6_TNL_MAX)
- goto failed;
- }
+ else
+ sprintf(name, "ip6tnl%%d");
+
dev = alloc_netdev(sizeof (*t), name, ip6_tnl_dev_setup);
if (dev == NULL)
goto failed;
+ if (strchr(name, '%')) {
+ if (dev_alloc_name(dev, name) < 0)
+ goto failed_free;
+ }
+
t = netdev_priv(dev);
dev->init = ip6_tnl_dev_init;
t->parms = *p;
- if ((err = register_netdevice(dev)) < 0) {
- free_netdev(dev);
- goto failed;
- }
+ if ((err = register_netdevice(dev)) < 0)
+ goto failed_free;
+
dev_hold(dev);
ip6_tnl_link(t);
return t;
+
+failed_free:
+ free_netdev(dev);
failed:
return NULL;
}
diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c
index b900395..e3dcfa2 100644
--- a/net/ipv6/ipcomp6.c
+++ b/net/ipv6/ipcomp6.c
@@ -146,7 +146,9 @@
scratch = *per_cpu_ptr(ipcomp6_scratches, cpu);
tfm = *per_cpu_ptr(ipcd->tfms, cpu);
+ local_bh_disable();
err = crypto_comp_compress(tfm, start, plen, scratch, &dlen);
+ local_bh_enable();
if (err || (dlen + sizeof(*ipch)) >= plen) {
put_cpu();
goto out_ok;
diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c
index e869916..cc2f9af 100644
--- a/net/ipv6/netfilter/ip6_queue.c
+++ b/net/ipv6/netfilter/ip6_queue.c
@@ -285,8 +285,8 @@
ipq_mangle_ipv6(ipq_verdict_msg_t *v, struct nf_queue_entry *e)
{
int diff;
- int err;
struct ipv6hdr *user_iph = (struct ipv6hdr *)v->payload;
+ struct sk_buff *nskb;
if (v->data_len < sizeof(*user_iph))
return 0;
@@ -298,14 +298,16 @@
if (v->data_len > 0xFFFF)
return -EINVAL;
if (diff > skb_tailroom(e->skb)) {
- err = pskb_expand_head(e->skb, 0,
+ nskb = skb_copy_expand(e->skb, 0,
diff - skb_tailroom(e->skb),
GFP_ATOMIC);
- if (err) {
+ if (!nskb) {
printk(KERN_WARNING "ip6_queue: OOM "
"in mangle, dropping packet\n");
- return err;
+ return -ENOMEM;
}
+ kfree_skb(e->skb);
+ e->skb = nskb;
}
skb_put(e->skb, diff);
}
diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
index 35e502a..199ef379 100644
--- a/net/ipv6/proc.c
+++ b/net/ipv6/proc.c
@@ -217,12 +217,12 @@
if (!proc_net_devsnmp6)
return -ENOENT;
- p = create_proc_entry(idev->dev->name, S_IRUGO, proc_net_devsnmp6);
+ p = proc_create(idev->dev->name, S_IRUGO,
+ proc_net_devsnmp6, &snmp6_seq_fops);
if (!p)
return -ENOMEM;
p->data = idev;
- p->proc_fops = &snmp6_seq_fops;
idev->stats.proc_dir_entry = p;
return 0;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 6e7b56e..e8b241c 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1719,6 +1719,8 @@
cfg->fc_src_len = rtmsg->rtmsg_src_len;
cfg->fc_flags = rtmsg->rtmsg_flags;
+ cfg->fc_nlinfo.nl_net = &init_net;
+
ipv6_addr_copy(&cfg->fc_dst, &rtmsg->rtmsg_dst);
ipv6_addr_copy(&cfg->fc_src, &rtmsg->rtmsg_src);
ipv6_addr_copy(&cfg->fc_gateway, &rtmsg->rtmsg_gateway);
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index e77239d..1656c00 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -164,21 +164,18 @@
if (parms->name[0])
strlcpy(name, parms->name, IFNAMSIZ);
- else {
- int i;
- for (i=1; i<100; i++) {
- sprintf(name, "sit%d", i);
- if (__dev_get_by_name(&init_net, name) == NULL)
- break;
- }
- if (i==100)
- goto failed;
- }
+ else
+ sprintf(name, "sit%%d");
dev = alloc_netdev(sizeof(*t), name, ipip6_tunnel_setup);
if (dev == NULL)
return NULL;
+ if (strchr(name, '%')) {
+ if (dev_alloc_name(dev, name) < 0)
+ goto failed_free;
+ }
+
nt = netdev_priv(dev);
dev->init = ipip6_tunnel_init;
nt->parms = *parms;
@@ -186,16 +183,16 @@
if (parms->i_flags & SIT_ISATAP)
dev->priv_flags |= IFF_ISATAP;
- if (register_netdevice(dev) < 0) {
- free_netdev(dev);
- goto failed;
- }
+ if (register_netdevice(dev) < 0)
+ goto failed_free;
dev_hold(dev);
ipip6_tunnel_link(nt);
return nt;
+failed_free:
+ free_netdev(dev);
failed:
return NULL;
}
diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c
index 408691b..d6d3e68 100644
--- a/net/ipv6/sysctl_net_ipv6.c
+++ b/net/ipv6/sysctl_net_ipv6.c
@@ -102,9 +102,6 @@
net->ipv6.sysctl.table = register_net_sysctl_table(net, net_ipv6_ctl_path,
ipv6_table);
if (!net->ipv6.sysctl.table)
- return -ENOMEM;
-
- if (!net->ipv6.sysctl.table)
goto out_ipv6_icmp_table;
err = 0;
diff --git a/net/ipx/ipx_proc.c b/net/ipx/ipx_proc.c
index d483a00..5ed97ad 100644
--- a/net/ipx/ipx_proc.c
+++ b/net/ipx/ipx_proc.c
@@ -358,22 +358,19 @@
if (!ipx_proc_dir)
goto out;
- p = create_proc_entry("interface", S_IRUGO, ipx_proc_dir);
+ p = proc_create("interface", S_IRUGO,
+ ipx_proc_dir, &ipx_seq_interface_fops);
if (!p)
goto out_interface;
- p->proc_fops = &ipx_seq_interface_fops;
- p = create_proc_entry("route", S_IRUGO, ipx_proc_dir);
+ p = proc_create("route", S_IRUGO, ipx_proc_dir, &ipx_seq_route_fops);
if (!p)
goto out_route;
- p->proc_fops = &ipx_seq_route_fops;
- p = create_proc_entry("socket", S_IRUGO, ipx_proc_dir);
+ p = proc_create("socket", S_IRUGO, ipx_proc_dir, &ipx_seq_socket_fops);
if (!p)
goto out_socket;
- p->proc_fops = &ipx_seq_socket_fops;
-
rc = 0;
out:
return rc;
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 1c85392..8b5f486 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -3807,17 +3807,16 @@
{
struct proc_dir_entry *e;
- e = create_proc_entry("pfkey", 0, init_net.proc_net);
+ e = proc_net_fops_create(&init_net, "pfkey", 0, &pfkey_proc_ops);
if (e == NULL)
return -ENOMEM;
- e->proc_fops = &pfkey_proc_ops;
return 0;
}
static void pfkey_exit_proc(void)
{
- remove_proc_entry("net/pfkey", NULL);
+ proc_net_remove(&init_net, "pfkey");
}
#else
static inline int pfkey_init_proc(void)
diff --git a/net/llc/llc_proc.c b/net/llc/llc_proc.c
index cb34bc0..48212c0 100644
--- a/net/llc/llc_proc.c
+++ b/net/llc/llc_proc.c
@@ -239,18 +239,14 @@
goto out;
llc_proc_dir->owner = THIS_MODULE;
- p = create_proc_entry("socket", S_IRUGO, llc_proc_dir);
+ p = proc_create("socket", S_IRUGO, llc_proc_dir, &llc_seq_socket_fops);
if (!p)
goto out_socket;
- p->proc_fops = &llc_seq_socket_fops;
-
- p = create_proc_entry("core", S_IRUGO, llc_proc_dir);
+ p = proc_create("core", S_IRUGO, llc_proc_dir, &llc_seq_core_fops);
if (!p)
goto out_core;
- p->proc_fops = &llc_seq_core_fops;
-
rc = 0;
out:
return rc;
diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c
index 2019b4f..9aeed53 100644
--- a/net/mac80211/ieee80211_sta.c
+++ b/net/mac80211/ieee80211_sta.c
@@ -1116,9 +1116,10 @@
/* prepare reordering buffer */
tid_agg_rx->reorder_buf =
kmalloc(buf_size * sizeof(struct sk_buf *), GFP_ATOMIC);
- if ((!tid_agg_rx->reorder_buf) && net_ratelimit()) {
- printk(KERN_ERR "can not allocate reordering buffer "
- "to tid %d\n", tid);
+ if (!tid_agg_rx->reorder_buf) {
+ if (net_ratelimit())
+ printk(KERN_ERR "can not allocate reordering buffer "
+ "to tid %d\n", tid);
goto end;
}
memset(tid_agg_rx->reorder_buf, 0,
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 327e847..b77eb56 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -256,13 +256,19 @@
struct hlist_node *n;
unsigned int hash = hash_conntrack(tuple);
+ /* Disable BHs the entire time since we normally need to disable them
+ * at least once for the stats anyway.
+ */
+ local_bh_disable();
hlist_for_each_entry_rcu(h, n, &nf_conntrack_hash[hash], hnode) {
if (nf_ct_tuple_equal(tuple, &h->tuple)) {
NF_CT_STAT_INC(found);
+ local_bh_enable();
return h;
}
NF_CT_STAT_INC(searched);
}
+ local_bh_enable();
return NULL;
}
@@ -400,17 +406,20 @@
struct hlist_node *n;
unsigned int hash = hash_conntrack(tuple);
- rcu_read_lock();
+ /* Disable BHs the entire time since we need to disable them at
+ * least once for the stats anyway.
+ */
+ rcu_read_lock_bh();
hlist_for_each_entry_rcu(h, n, &nf_conntrack_hash[hash], hnode) {
if (nf_ct_tuplehash_to_ctrack(h) != ignored_conntrack &&
nf_ct_tuple_equal(tuple, &h->tuple)) {
NF_CT_STAT_INC(found);
- rcu_read_unlock();
+ rcu_read_unlock_bh();
return 1;
}
NF_CT_STAT_INC(searched);
}
- rcu_read_unlock();
+ rcu_read_unlock_bh();
return 0;
}
diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index a48b20f..0043d3a 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -443,8 +443,8 @@
static int
nfqnl_mangle(void *data, int data_len, struct nf_queue_entry *e)
{
+ struct sk_buff *nskb;
int diff;
- int err;
diff = data_len - e->skb->len;
if (diff < 0) {
@@ -454,14 +454,16 @@
if (data_len > 0xFFFF)
return -EINVAL;
if (diff > skb_tailroom(e->skb)) {
- err = pskb_expand_head(e->skb, 0,
+ nskb = skb_copy_expand(e->skb, 0,
diff - skb_tailroom(e->skb),
GFP_ATOMIC);
- if (err) {
+ if (!nskb) {
printk(KERN_WARNING "nf_queue: OOM "
"in mangle, dropping packet\n");
- return err;
+ return -ENOMEM;
}
+ kfree_skb(e->skb);
+ e->skb = nskb;
}
skb_put(e->skb, diff);
}
diff --git a/net/netfilter/xt_conntrack.c b/net/netfilter/xt_conntrack.c
index 8533085..0c50b28 100644
--- a/net/netfilter/xt_conntrack.c
+++ b/net/netfilter/xt_conntrack.c
@@ -122,7 +122,7 @@
const union nf_inet_addr *umask, unsigned int l3proto)
{
if (l3proto == AF_INET)
- return (kaddr->ip & umask->ip) == uaddr->ip;
+ return ((kaddr->ip ^ uaddr->ip) & umask->ip) == 0;
else if (l3proto == AF_INET6)
return ipv6_masked_addr_cmp(&kaddr->in6, &umask->in6,
&uaddr->in6) == 0;
@@ -231,7 +231,7 @@
if (test_bit(IPS_DST_NAT_BIT, &ct->status))
statebit |= XT_CONNTRACK_STATE_DNAT;
}
- if ((info->state_mask & statebit) ^
+ if (!!(info->state_mask & statebit) ^
!(info->invert_flags & XT_CONNTRACK_STATE))
return false;
}
diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c
index 744c7f2..5418ce5 100644
--- a/net/netfilter/xt_hashlimit.c
+++ b/net/netfilter/xt_hashlimit.c
@@ -774,9 +774,6 @@
return false;
}
mutex_unlock(&hlimit_mutex);
-
- /* Ugly hack: For SMP, we only want to use one set */
- info->master = info;
return true;
}
diff --git a/net/netfilter/xt_iprange.c b/net/netfilter/xt_iprange.c
index 4f984dc..500528d 100644
--- a/net/netfilter/xt_iprange.c
+++ b/net/netfilter/xt_iprange.c
@@ -102,7 +102,7 @@
int r;
for (i = 0; i < 4; ++i) {
- r = (__force u32)a->s6_addr32[i] - (__force u32)b->s6_addr32[i];
+ r = ntohl(a->s6_addr32[i]) - ntohl(b->s6_addr32[i]);
if (r != 0)
return r;
}
diff --git a/net/netfilter/xt_u32.c b/net/netfilter/xt_u32.c
index 9b8ed39..627e0f3 100644
--- a/net/netfilter/xt_u32.c
+++ b/net/netfilter/xt_u32.c
@@ -26,7 +26,6 @@
u_int32_t pos;
u_int32_t val;
u_int32_t at;
- int ret;
/*
* Small example: "0 >> 28 == 4 && 8 & 0xFF0000 >> 16 = 6, 17"
@@ -40,8 +39,8 @@
if (skb->len < 4 || pos > skb->len - 4)
return false;
- ret = skb_copy_bits(skb, pos, &n, sizeof(n));
- BUG_ON(ret < 0);
+ if (skb_copy_bits(skb, pos, &n, sizeof(n)) < 0)
+ BUG();
val = ntohl(n);
nnums = ct->nnums;
@@ -67,9 +66,9 @@
pos > skb->len - at - 4)
return false;
- ret = skb_copy_bits(skb, at + pos, &n,
- sizeof(n));
- BUG_ON(ret < 0);
+ if (skb_copy_bits(skb, at + pos, &n,
+ sizeof(n)) < 0)
+ BUG();
val = ntohl(n);
break;
}
diff --git a/net/sctp/auth.c b/net/sctp/auth.c
index 8bb79f2..675a5c3 100644
--- a/net/sctp/auth.c
+++ b/net/sctp/auth.c
@@ -838,11 +838,11 @@
}
/* Create a new key data based on the info passed in */
- key = sctp_auth_create_key(auth_key->sca_keylen, GFP_KERNEL);
+ key = sctp_auth_create_key(auth_key->sca_keylength, GFP_KERNEL);
if (!key)
goto nomem;
- memcpy(key->data, &auth_key->sca_key[0], auth_key->sca_keylen);
+ memcpy(key->data, &auth_key->sca_key[0], auth_key->sca_keylength);
/* If we are replacing, remove the old keys data from the
* key id. If we are adding new key id, add it to the
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index 4d7ec96..87f9405 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -966,7 +966,7 @@
.flags = INET6_PROTO_NOPOLICY | INET6_PROTO_FINAL,
};
-static struct sctp_af sctp_ipv6_specific = {
+static struct sctp_af sctp_af_inet6 = {
.sa_family = AF_INET6,
.sctp_xmit = sctp_v6_xmit,
.setsockopt = ipv6_setsockopt,
@@ -998,7 +998,7 @@
#endif
};
-static struct sctp_pf sctp_pf_inet6_specific = {
+static struct sctp_pf sctp_pf_inet6 = {
.event_msgname = sctp_inet6_event_msgname,
.skb_msgname = sctp_inet6_skb_msgname,
.af_supported = sctp_inet6_af_supported,
@@ -1008,7 +1008,7 @@
.supported_addrs = sctp_inet6_supported_addrs,
.create_accept_sk = sctp_v6_create_accept_sk,
.addr_v4map = sctp_v6_addr_v4map,
- .af = &sctp_ipv6_specific,
+ .af = &sctp_af_inet6,
};
/* Initialize IPv6 support and register with socket layer. */
@@ -1017,10 +1017,10 @@
int rc;
/* Register the SCTP specific PF_INET6 functions. */
- sctp_register_pf(&sctp_pf_inet6_specific, PF_INET6);
+ sctp_register_pf(&sctp_pf_inet6, PF_INET6);
/* Register the SCTP specific AF_INET6 functions. */
- sctp_register_af(&sctp_ipv6_specific);
+ sctp_register_af(&sctp_af_inet6);
rc = proto_register(&sctpv6_prot, 1);
if (rc)
@@ -1051,7 +1051,7 @@
inet6_unregister_protosw(&sctpv6_seqpacket_protosw);
inet6_unregister_protosw(&sctpv6_stream_protosw);
proto_unregister(&sctpv6_prot);
- list_del(&sctp_ipv6_specific.list);
+ list_del(&sctp_af_inet6.list);
}
/* Unregister with inet6 layer. */
diff --git a/net/sctp/objcnt.c b/net/sctp/objcnt.c
index 14e294e..cfeb07e 100644
--- a/net/sctp/objcnt.c
+++ b/net/sctp/objcnt.c
@@ -132,12 +132,11 @@
{
struct proc_dir_entry *ent;
- ent = create_proc_entry("sctp_dbg_objcnt", 0, proc_net_sctp);
+ ent = proc_create("sctp_dbg_objcnt", 0,
+ proc_net_sctp, &sctp_objcnt_ops);
if (!ent)
printk(KERN_WARNING
"sctp_dbg_objcnt: Unable to create /proc entry.\n");
- else
- ent->proc_fops = &sctp_objcnt_ops;
}
/* Cleanup the objcount entry in the proc filesystem. */
diff --git a/net/sctp/proc.c b/net/sctp/proc.c
index 69bb5a6..9e214da 100644
--- a/net/sctp/proc.c
+++ b/net/sctp/proc.c
@@ -108,12 +108,10 @@
{
struct proc_dir_entry *p;
- p = create_proc_entry("snmp", S_IRUGO, proc_net_sctp);
+ p = proc_create("snmp", S_IRUGO, proc_net_sctp, &sctp_snmp_seq_fops);
if (!p)
return -ENOMEM;
- p->proc_fops = &sctp_snmp_seq_fops;
-
return 0;
}
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 22a1657..688546d 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -832,7 +832,7 @@
return ip_queue_xmit(skb, ipfragok);
}
-static struct sctp_af sctp_ipv4_specific;
+static struct sctp_af sctp_af_inet;
static struct sctp_pf sctp_pf_inet = {
.event_msgname = sctp_inet_event_msgname,
@@ -844,7 +844,7 @@
.supported_addrs = sctp_inet_supported_addrs,
.create_accept_sk = sctp_v4_create_accept_sk,
.addr_v4map = sctp_v4_addr_v4map,
- .af = &sctp_ipv4_specific,
+ .af = &sctp_af_inet
};
/* Notifier for inetaddr addition/deletion events. */
@@ -906,7 +906,7 @@
};
/* IPv4 address related functions. */
-static struct sctp_af sctp_ipv4_specific = {
+static struct sctp_af sctp_af_inet = {
.sa_family = AF_INET,
.sctp_xmit = sctp_v4_xmit,
.setsockopt = ip_setsockopt,
@@ -1192,7 +1192,7 @@
sctp_sysctl_register();
INIT_LIST_HEAD(&sctp_address_families);
- sctp_register_af(&sctp_ipv4_specific);
+ sctp_register_af(&sctp_af_inet);
status = proto_register(&sctp_prot, 1);
if (status)
@@ -1249,7 +1249,7 @@
proto_unregister(&sctp_prot);
err_proto_register:
sctp_sysctl_unregister();
- list_del(&sctp_ipv4_specific.list);
+ list_del(&sctp_af_inet.list);
free_pages((unsigned long)sctp_port_hashtable,
get_order(sctp_port_hashsize *
sizeof(struct sctp_bind_hashbucket)));
@@ -1299,7 +1299,7 @@
inet_unregister_protosw(&sctp_seqpacket_protosw);
sctp_sysctl_unregister();
- list_del(&sctp_ipv4_specific.list);
+ list_del(&sctp_af_inet.list);
free_pages((unsigned long)sctp_assoc_hashtable,
get_order(sctp_assoc_hashsize *
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index d47d578..9398926 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1964,7 +1964,7 @@
static int sctp_setsockopt_events(struct sock *sk, char __user *optval,
int optlen)
{
- if (optlen != sizeof(struct sctp_event_subscribe))
+ if (optlen > sizeof(struct sctp_event_subscribe))
return -EINVAL;
if (copy_from_user(&sctp_sk(sk)->subscribe, optval, optlen))
return -EFAULT;
@@ -5070,6 +5070,7 @@
struct sctp_authchunks val;
struct sctp_association *asoc;
struct sctp_chunks_param *ch;
+ u32 num_chunks;
char __user *to;
if (len <= sizeof(struct sctp_authchunks))
@@ -5086,12 +5087,15 @@
ch = asoc->peer.peer_chunks;
/* See if the user provided enough room for all the data */
- if (len < ntohs(ch->param_hdr.length))
+ num_chunks = ntohs(ch->param_hdr.length) - sizeof(sctp_paramhdr_t);
+ if (len < num_chunks)
return -EINVAL;
- len = ntohs(ch->param_hdr.length);
+ len = num_chunks;
if (put_user(len, optlen))
return -EFAULT;
+ if (put_user(num_chunks, &p->gauth_number_of_chunks))
+ return -EFAULT;
if (copy_to_user(to, ch->chunks, len))
return -EFAULT;
@@ -5105,6 +5109,7 @@
struct sctp_authchunks val;
struct sctp_association *asoc;
struct sctp_chunks_param *ch;
+ u32 num_chunks;
char __user *to;
if (len <= sizeof(struct sctp_authchunks))
@@ -5123,12 +5128,15 @@
else
ch = sctp_sk(sk)->ep->auth_chunk_list;
- if (len < ntohs(ch->param_hdr.length))
+ num_chunks = ntohs(ch->param_hdr.length) - sizeof(sctp_paramhdr_t);
+ if (len < num_chunks)
return -EINVAL;
- len = ntohs(ch->param_hdr.length);
+ len = num_chunks;
if (put_user(len, optlen))
return -EFAULT;
+ if (put_user(num_chunks, &p->gauth_number_of_chunks))
+ return -EFAULT;
if (copy_to_user(to, ch->chunks, len))
return -EFAULT;
@@ -6488,6 +6496,7 @@
.memory_pressure = &sctp_memory_pressure,
.enter_memory_pressure = sctp_enter_memory_pressure,
.memory_allocated = &sctp_memory_allocated,
+ .sockets_allocated = &sctp_sockets_allocated,
REF_PROTO_INUSE(sctp)
};
@@ -6521,6 +6530,7 @@
.memory_pressure = &sctp_memory_pressure,
.enter_memory_pressure = sctp_enter_memory_pressure,
.memory_allocated = &sctp_memory_allocated,
+ .sockets_allocated = &sctp_sockets_allocated,
REF_PROTO_INUSE(sctpv6)
};
#endif /* defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) */
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index e27b11f..b43f1f1 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -206,7 +206,7 @@
* This field is the total length of the notification data, including
* the notification header.
*/
- sac->sac_length = sizeof(struct sctp_assoc_change);
+ sac->sac_length = skb->len;
/* Socket Extensions for SCTP
* 5.3.1.1 SCTP_ASSOC_CHANGE
diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c
index 636c8e0..b5f2786 100644
--- a/net/sunrpc/cache.c
+++ b/net/sunrpc/cache.c
@@ -316,31 +316,29 @@
cd->proc_ent->owner = cd->owner;
cd->channel_ent = cd->content_ent = NULL;
- p = create_proc_entry("flush", S_IFREG|S_IRUSR|S_IWUSR, cd->proc_ent);
+ p = proc_create("flush", S_IFREG|S_IRUSR|S_IWUSR,
+ cd->proc_ent, &cache_flush_operations);
cd->flush_ent = p;
if (p == NULL)
goto out_nomem;
- p->proc_fops = &cache_flush_operations;
p->owner = cd->owner;
p->data = cd;
if (cd->cache_request || cd->cache_parse) {
- p = create_proc_entry("channel", S_IFREG|S_IRUSR|S_IWUSR,
- cd->proc_ent);
+ p = proc_create("channel", S_IFREG|S_IRUSR|S_IWUSR,
+ cd->proc_ent, &cache_file_operations);
cd->channel_ent = p;
if (p == NULL)
goto out_nomem;
- p->proc_fops = &cache_file_operations;
p->owner = cd->owner;
p->data = cd;
}
if (cd->cache_show) {
- p = create_proc_entry("content", S_IFREG|S_IRUSR|S_IWUSR,
- cd->proc_ent);
+ p = proc_create("content", S_IFREG|S_IRUSR|S_IWUSR,
+ cd->proc_ent, &content_file_operations);
cd->content_ent = p;
if (p == NULL)
goto out_nomem;
- p->proc_fops = &content_file_operations;
p->owner = cd->owner;
p->data = cd;
}
diff --git a/net/sunrpc/stats.c b/net/sunrpc/stats.c
index 5a16875..c6061a4 100644
--- a/net/sunrpc/stats.c
+++ b/net/sunrpc/stats.c
@@ -229,9 +229,8 @@
rpc_proc_init();
dprintk("RPC: registering /proc/net/rpc/%s\n", name);
- ent = create_proc_entry(name, 0, proc_net_rpc);
+ ent = proc_create(name, 0, proc_net_rpc, fops);
if (ent) {
- ent->proc_fops = fops;
ent->data = data;
}
return ent;
diff --git a/net/tipc/cluster.c b/net/tipc/cluster.c
index 95b3739..4bb3404 100644
--- a/net/tipc/cluster.c
+++ b/net/tipc/cluster.c
@@ -142,7 +142,7 @@
max_n_num = tipc_highest_allowed_slave;
assert(n_num > 0);
assert(n_num <= max_n_num);
- assert(c_ptr->nodes[n_num] == 0);
+ assert(c_ptr->nodes[n_num] == NULL);
c_ptr->nodes[n_num] = n_ptr;
if (n_num > c_ptr->highest_node)
c_ptr->highest_node = n_num;
diff --git a/net/tipc/link.c b/net/tipc/link.c
index 1b17fec..cefa998 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -3251,7 +3251,7 @@
if ((mod(msg_seqno(buf_msg(l_ptr->last_out)) -
msg_seqno(buf_msg(l_ptr->first_out)))
!= (l_ptr->out_queue_size - 1))
- || (l_ptr->last_out->next != 0)) {
+ || (l_ptr->last_out->next != NULL)) {
tipc_printf(buf, "\nSend queue inconsistency\n");
tipc_printf(buf, "first_out= %x ", l_ptr->first_out);
tipc_printf(buf, "next_out= %x ", l_ptr->next_out);
diff --git a/net/tipc/ref.c b/net/tipc/ref.c
index 6704a58..c38744c 100644
--- a/net/tipc/ref.c
+++ b/net/tipc/ref.c
@@ -148,7 +148,7 @@
reference = (next_plus_upper & ~index_mask) + index;
entry->data.reference = reference;
entry->object = object;
- if (lock != 0)
+ if (lock != NULL)
*lock = &entry->lock;
spin_unlock_bh(&entry->lock);
}
diff --git a/net/tipc/zone.c b/net/tipc/zone.c
index 114e173..3506f85 100644
--- a/net/tipc/zone.c
+++ b/net/tipc/zone.c
@@ -82,7 +82,7 @@
assert(c_ptr->addr);
assert(c_num <= tipc_max_clusters);
- assert(z_ptr->clusters[c_num] == 0);
+ assert(z_ptr->clusters[c_num] == NULL);
z_ptr->clusters[c_num] = c_ptr;
}
diff --git a/net/wanrouter/wanproc.c b/net/wanrouter/wanproc.c
index f2e54c3..5bebe40 100644
--- a/net/wanrouter/wanproc.c
+++ b/net/wanrouter/wanproc.c
@@ -292,14 +292,12 @@
if (!proc_router)
goto fail;
- p = create_proc_entry("config", S_IRUGO, proc_router);
+ p = proc_create("config", S_IRUGO, proc_router, &config_fops);
if (!p)
goto fail_config;
- p->proc_fops = &config_fops;
- p = create_proc_entry("status", S_IRUGO, proc_router);
+ p = proc_create("status", S_IRUGO, proc_router, &status_fops);
if (!p)
goto fail_stat;
- p->proc_fops = &status_fops;
return 0;
fail_stat:
remove_proc_entry("config", proc_router);
@@ -329,10 +327,10 @@
if (wandev->magic != ROUTER_MAGIC)
return -EINVAL;
- wandev->dent = create_proc_entry(wandev->name, S_IRUGO, proc_router);
+ wandev->dent = proc_create(wandev->name, S_IRUGO,
+ proc_router, &wandev_fops);
if (!wandev->dent)
return -ENOMEM;
- wandev->dent->proc_fops = &wandev_fops;
wandev->dent->data = wandev;
return 0;
}
diff --git a/net/x25/x25_proc.c b/net/x25/x25_proc.c
index 3f52b09..1afa44d 100644
--- a/net/x25/x25_proc.c
+++ b/net/x25/x25_proc.c
@@ -312,20 +312,18 @@
if (!x25_proc_dir)
goto out;
- p = create_proc_entry("route", S_IRUGO, x25_proc_dir);
+ p = proc_create("route", S_IRUGO, x25_proc_dir, &x25_seq_route_fops);
if (!p)
goto out_route;
- p->proc_fops = &x25_seq_route_fops;
- p = create_proc_entry("socket", S_IRUGO, x25_proc_dir);
+ p = proc_create("socket", S_IRUGO, x25_proc_dir, &x25_seq_socket_fops);
if (!p)
goto out_socket;
- p->proc_fops = &x25_seq_socket_fops;
- p = create_proc_entry("forward", S_IRUGO, x25_proc_dir);
+ p = proc_create("forward", S_IRUGO, x25_proc_dir,
+ &x25_seq_forward_fops);
if (!p)
goto out_forward;
- p->proc_fops = &x25_seq_forward_fops;
rc = 0;
out:
diff --git a/sound/isa/sb/sb8_main.c b/sound/isa/sb/sb8_main.c
index 6304c3a..fe03bb8 100644
--- a/sound/isa/sb/sb8_main.c
+++ b/sound/isa/sb/sb8_main.c
@@ -277,7 +277,7 @@
} else {
snd_sbdsp_command(chip, 256 - runtime->rate_den);
}
- if (chip->capture_format != SB_DSP_OUTPUT) {
+ if (chip->capture_format != SB_DSP_INPUT) {
count--;
snd_sbdsp_command(chip, SB_DSP_BLOCK_SIZE);
snd_sbdsp_command(chip, count & 0xff);
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 19f0884..c864928 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -1778,9 +1778,9 @@
static struct hda_input_mux ad1988_6stack_capture_source = {
.num_items = 5,
.items = {
- { "Front Mic", 0x0 },
- { "Line", 0x1 },
- { "Mic", 0x4 },
+ { "Front Mic", 0x1 }, /* port-B */
+ { "Line", 0x2 }, /* port-C */
+ { "Mic", 0x4 }, /* port-E */
{ "CD", 0x5 },
{ "Mix", 0x9 },
},
@@ -1789,7 +1789,7 @@
static struct hda_input_mux ad1988_laptop_capture_source = {
.num_items = 3,
.items = {
- { "Mic/Line", 0x0 },
+ { "Mic/Line", 0x1 }, /* port-B */
{ "CD", 0x5 },
{ "Mix", 0x9 },
},
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index f7cd3a8..7206b30 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -1230,6 +1230,11 @@
static struct hda_verb cxt5047_hp_init_verbs[] = {
/* pin sensing on HP jack */
{0x13, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_HP_EVENT},
+ /* 0x13 is actually shared by both HP and speaker;
+ * setting the connection to 0 (=0x19) makes the master volume control
+ * working mysteriouslly...
+ */
+ {0x13, AC_VERB_SET_CONNECT_SEL, 0x0},
/* Record selector: Ext Mic */
{0x12, AC_VERB_SET_CONNECT_SEL,0x03},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE,
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 777f8c0..33282f9 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3973,8 +3973,8 @@
ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN),
HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT),
- HDA_CODEC_VOLUME("Internal Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Internal Speaker Playback Switch", 0x09, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Speaker Playback Switch", 0x09, 2, HDA_INPUT),
{ } /* end */
};
@@ -4005,9 +4005,9 @@
HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
ALC_PIN_MODE("Headphone Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
- HDA_CODEC_VOLUME_MONO("Mono Speaker Playback Volume", 0x0a, 1, 0x0,
+ HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0,
HDA_OUTPUT),
- HDA_BIND_MUTE_MONO("Mono Speaker Playback Switch", 0x0a, 1, 2,
+ HDA_BIND_MUTE_MONO("Speaker Playback Switch", 0x0a, 1, 2,
HDA_INPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
@@ -7639,6 +7639,7 @@
SND_PCI_QUIRK(0x17aa, 0x3bfc, "Lenovo NB0763", ALC883_LENOVO_NB0763),
SND_PCI_QUIRK(0x17aa, 0x3bfd, "Lenovo NB0763", ALC883_LENOVO_NB0763),
SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2),
+ SND_PCI_QUIRK(0x17f2, 0x5000, "Albatron KI690-AM2", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66),
SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch),
{}
@@ -8102,7 +8103,7 @@
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
/* HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT),
- HDA_CODEC_MUTE("PC Beelp Playback Switch", 0x0b, 0x05, HDA_INPUT), */
+ HDA_CODEC_MUTE("PC Beep Playback Switch", 0x0b, 0x05, HDA_INPUT), */
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
@@ -8124,7 +8125,7 @@
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
/* HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT),
- HDA_CODEC_MUTE("PC Beelp Playback Switch", 0x0b, 0x05, HDA_INPUT), */
+ HDA_CODEC_MUTE("PC Beep Playback Switch", 0x0b, 0x05, HDA_INPUT), */
/*HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT),*/
HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
{ } /* end */
@@ -9238,6 +9239,7 @@
SND_PCI_QUIRK(0x104d, 0x900e, "Sony ASSAMD", ALC262_SONY_ASSAMD),
SND_PCI_QUIRK(0x104d, 0x9015, "Sony 0x9015", ALC262_SONY_ASSAMD),
SND_PCI_QUIRK(0x10cf, 0x1397, "Fujitsu", ALC262_FUJITSU),
+ SND_PCI_QUIRK(0x10cf, 0x142d, "Fujitsu Lifebook E8410", ALC262_FUJITSU),
SND_PCI_QUIRK(0x144d, 0xc032, "Samsung Q1 Ultra", ALC262_ULTRA),
SND_PCI_QUIRK(0x17ff, 0x0560, "Benq ED8", ALC262_BENQ_ED8),
SND_PCI_QUIRK(0x17ff, 0x058d, "Benq T31-16", ALC262_BENQ_T31),
@@ -12993,8 +12995,8 @@
static struct snd_kcontrol_new alc662_eeepc_p701_mixer[] = {
HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("LineOut Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("LineOut Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Line-Out Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("e-Mic Boost", 0x18, 0, HDA_INPUT),
HDA_CODEC_VOLUME("e-Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
@@ -13007,8 +13009,8 @@
};
static struct snd_kcontrol_new alc662_eeepc_ep20_mixer[] = {
- HDA_CODEC_VOLUME("LineOut Playback Volume", 0x02, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("LineOut Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Line-Out Playback Switch", 0x14, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Surround Playback Volume", 0x03, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Surround Playback Switch", 0x03, 2, HDA_INPUT),
HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x04, 1, 0x0, HDA_OUTPUT),
diff --git a/sound/pci/ice1712/phase.c b/sound/pci/ice1712/phase.c
index 9ab4a9f..5a158b7 100644
--- a/sound/pci/ice1712/phase.c
+++ b/sound/pci/ice1712/phase.c
@@ -51,7 +51,7 @@
struct phase28_spec {
unsigned short master[2];
unsigned short vol[8];
-} phase28;
+};
/* WM8770 registers */
#define WM_DAC_ATTEN 0x00 /* DAC1-8 analog attenuation */
diff --git a/sound/pci/ice1712/revo.c b/sound/pci/ice1712/revo.c
index ddd5fc8..301bf92 100644
--- a/sound/pci/ice1712/revo.c
+++ b/sound/pci/ice1712/revo.c
@@ -36,7 +36,7 @@
struct revo51_spec {
struct snd_i2c_device *dev;
struct snd_pt2258 *pt2258;
-} revo51;
+};
static void revo_i2s_mclk_changed(struct snd_ice1712 *ice)
{
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 061072c..c52abd0 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -1708,6 +1708,12 @@
};
static struct ac97_quirk ac97_quirks[] __devinitdata = {
+ {
+ .subvendor = 0x0e11,
+ .subdevice = 0x000e,
+ .name = "Compaq Deskpro EN", /* AD1885 */
+ .type = AC97_TUNE_HP_ONLY
+ },
{
.subvendor = 0x0e11,
.subdevice = 0x008a,
@@ -1740,6 +1746,12 @@
},
{
.subvendor = 0x1025,
+ .subdevice = 0x0082,
+ .name = "Acer Travelmate 2310",
+ .type = AC97_TUNE_HP_ONLY
+ },
+ {
+ .subvendor = 0x1025,
.subdevice = 0x0083,
.name = "Acer Aspire 3003LCi",
.type = AC97_TUNE_HP_ONLY
diff --git a/sound/pci/oxygen/hifier.c b/sound/pci/oxygen/hifier.c
index 3ea1f05..666f69a 100644
--- a/sound/pci/oxygen/hifier.c
+++ b/sound/pci/oxygen/hifier.c
@@ -150,6 +150,7 @@
.shortname = "C-Media CMI8787",
.longname = "C-Media Oxygen HD Audio",
.chip = "CMI8788",
+ .owner = THIS_MODULE,
.init = hifier_init,
.control_filter = hifier_control_filter,
.mixer_init = hifier_mixer_init,
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index 40e92f5..d163397 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -389,6 +389,7 @@
.shortname = "Asus AV200",
.longname = "Asus Virtuoso 200",
.chip = "AV200",
+ .owner = THIS_MODULE,
.init = xonar_init,
.control_filter = xonar_control_filter,
.mixer_init = xonar_mixer_init,
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 710e028..569ecac 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -681,8 +681,8 @@
{22579200, 48000, 48000, 0x0, 8, 7075},
{33868800, 48000, 48000, 0x0, 5, 8049},
/* 64k */
- {22579200, 96000, 96000, 0x1, 8, 7075},
- {33868800, 96000, 96000, 0x1, 5, 8049},
+ {22579200, 64000, 96000, 0x1, 8, 7075},
+ {33868800, 64000, 96000, 0x1, 5, 8049},
/* 88.2k */
{22579200, 88200, 88200, 0x0, 8, 0},
{33868800, 88200, 88200, 0x0, 5, 3333},
diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c
index 590baea..524f745 100644
--- a/sound/soc/codecs/wm9712.c
+++ b/sound/soc/codecs/wm9712.c
@@ -176,7 +176,8 @@
* the codec only has a single control that is shared by both channels.
* This makes it impossible to determine the audio path.
*/
-static int mixer_event (struct snd_soc_dapm_widget *w, int event)
+static int mixer_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k, int event)
{
u16 l, r, beep, line, phone, mic, pcm, aux;
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index 3f34e53..1a70a6a 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -215,7 +215,8 @@
return 1;
}
-static int corgi_amp_event(struct snd_soc_dapm_widget *w, int event)
+static int corgi_amp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k, int event)
{
if (SND_SOC_DAPM_EVENT_ON(event))
set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON);
@@ -225,7 +226,8 @@
return 0;
}
-static int corgi_mic_event(struct snd_soc_dapm_widget *w, int event)
+static int corgi_mic_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k, int event)
{
if (SND_SOC_DAPM_EVENT_ON(event))
set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MIC_BIAS);
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index 5ae59bd..4fbf8bb 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -196,7 +196,8 @@
return 1;
}
-static int poodle_amp_event(struct snd_soc_dapm_widget *w, int event)
+static int poodle_amp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k, int event)
{
if (SND_SOC_DAPM_EVENT_ON(event))
locomo_gpio_write(&poodle_locomo_device.dev,
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index d56709e..ecca390 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -215,7 +215,8 @@
return 1;
}
-static int spitz_mic_bias(struct snd_soc_dapm_widget *w, int event)
+static int spitz_mic_bias(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k, int event)
{
if (machine_is_borzoi() || machine_is_spitz()) {
if (SND_SOC_DAPM_EVENT_ON(event))
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index e4d40b5..7346d7e 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -135,7 +135,8 @@
}
/* tosa dapm event handlers */
-static int tosa_hp_event(struct snd_soc_dapm_widget *w, int event)
+static int tosa_hp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k, int event)
{
if (SND_SOC_DAPM_EVENT_ON(event))
set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE);
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index 8fa9356..675672f 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -479,6 +479,33 @@
return 0;
}
+/*
+ * process after E-Mu 0202/0404 high speed playback sync complete
+ *
+ * These devices return the number of samples per packet instead of the number
+ * of samples per microframe.
+ */
+static int retire_playback_sync_urb_hs_emu(struct snd_usb_substream *subs,
+ struct snd_pcm_runtime *runtime,
+ struct urb *urb)
+{
+ unsigned int f;
+ unsigned long flags;
+
+ if (urb->iso_frame_desc[0].status == 0 &&
+ urb->iso_frame_desc[0].actual_length == 4) {
+ f = combine_quad((u8*)urb->transfer_buffer) & 0x0fffffff;
+ f >>= subs->datainterval;
+ if (f >= subs->freqn - subs->freqn / 8 && f <= subs->freqmax) {
+ spin_lock_irqsave(&subs->lock, flags);
+ subs->freqm = f;
+ spin_unlock_irqrestore(&subs->lock, flags);
+ }
+ }
+
+ return 0;
+}
+
/* determine the number of frames in the next packet */
static int snd_usb_audio_next_packet_size(struct snd_usb_substream *subs)
{
@@ -2219,10 +2246,17 @@
subs->stream = as;
subs->direction = stream;
subs->dev = as->chip->dev;
- if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL)
+ if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL) {
subs->ops = audio_urb_ops[stream];
- else
+ } else {
subs->ops = audio_urb_ops_high_speed[stream];
+ switch (as->chip->usb_id) {
+ case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */
+ case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */
+ subs->ops.retire_sync = retire_playback_sync_urb_hs_emu;
+ break;
+ }
+ }
snd_pcm_set_ops(as->pcm, stream,
stream == SNDRV_PCM_STREAM_PLAYBACK ?
&snd_usb_playback_ops : &snd_usb_capture_ops);