ARM: u8540: Add Pinctrl Device Tree settings for uart0, uart2
This patch adds pinctrl device tree settings for uart0 and uart2
for ccu8540 board.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
new file mode 100644
index 0000000..efddee9
--- /dev/null
+++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2012 ST-Ericsson
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <dt-bindings/pinctrl/nomadik.h>
+
+/ {
+ in_nopull: in_nopull {
+ ste,input = <INPUT_NOPULL>;
+ };
+
+ in_pu: input_pull_up {
+ ste,input = <INPUT_PULLUP>;
+ };
+
+ in_pd: input_pull_down {
+ ste,input = <INPUT_PULLDOWN>;
+ };
+
+ out_hi: output_high {
+ ste,output = <OUTPUT_HIGH>;
+ };
+
+ out_lo: output_low {
+ ste,output = <OUTPUT_LOW>;
+ };
+
+ gpio_out_lo: gpio_output_low {
+ ste,gpio = <GPIOMODE_ENABLED>;
+ ste,output = <OUTPUT_LOW>;
+ };
+
+ slpm_in_pu: slpm_in_pu {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-input = <SLPM_INPUT_PULLUP>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ };
+
+ slpm_in_wkup_pdis: slpm_in_wkup_pdis {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-input = <SLPM_DIR_INPUT>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+ };
+
+ slpm_out_lo: slpm_out_lo {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-output = <SLPM_OUTPUT_LOW>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ };
+
+ slpm_out_hi: slpm_out_hi {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-output = <SLPM_OUTPUT_HIGH>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ };
+
+ slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-output = <SLPM_OUTPUT_HIGH>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+ };
+
+ slpm_out_wkup_pdis: slpm_out_wkup_pdis {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-output = <SLPM_DIR_OUTPUT>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+ };
+
+ in_wkup_pdis: in_wkup_pdis {
+ ste,sleep-input = <SLPM_DIR_INPUT>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+ };
+
+ out_hi_wkup_pdis: out_hi_wkup_pdis {
+ ste,sleep-output = <SLPM_OUTPUT_HIGH>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+ };
+
+ out_wkup_pdis: out_wkup_pdis {
+ ste,sleep-output = <SLPM_DIR_OUTPUT>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+ };
+};