| /* |
| * Common data handling layer for ser_gigaset and usb_gigaset |
| * |
| * Copyright (c) 2005 by Tilman Schmidt <tilman@imap.cc>, |
| * Hansjoerg Lipp <hjlipp@web.de>, |
| * Stefan Eilers. |
| * |
| * ===================================================================== |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * ===================================================================== |
| */ |
| |
| #include "gigaset.h" |
| #include <linux/crc-ccitt.h> |
| #include <linux/bitrev.h> |
| |
| /* check if byte must be stuffed/escaped |
| * I'm not sure which data should be encoded. |
| * Therefore I will go the hard way and decode every value |
| * less than 0x20, the flag sequence and the control escape char. |
| */ |
| static inline int muststuff(unsigned char c) |
| { |
| if (c < PPP_TRANS) return 1; |
| if (c == PPP_FLAG) return 1; |
| if (c == PPP_ESCAPE) return 1; |
| /* other possible candidates: */ |
| /* 0x91: XON with parity set */ |
| /* 0x93: XOFF with parity set */ |
| return 0; |
| } |
| |
| /* == data input =========================================================== */ |
| |
| /* process a block of received bytes in command mode (modem response) |
| * Return value: |
| * number of processed bytes |
| */ |
| static inline int cmd_loop(unsigned char c, unsigned char *src, int numbytes, |
| struct inbuf_t *inbuf) |
| { |
| struct cardstate *cs = inbuf->cs; |
| unsigned cbytes = cs->cbytes; |
| int inputstate = inbuf->inputstate; |
| int startbytes = numbytes; |
| |
| for (;;) { |
| cs->respdata[cbytes] = c; |
| if (c == 10 || c == 13) { |
| gig_dbg(DEBUG_TRANSCMD, "%s: End of Command (%d Bytes)", |
| __func__, cbytes); |
| cs->cbytes = cbytes; |
| gigaset_handle_modem_response(cs); /* can change |
| cs->dle */ |
| cbytes = 0; |
| |
| if (cs->dle && |
| !(inputstate & INS_DLE_command)) { |
| inputstate &= ~INS_command; |
| break; |
| } |
| } else { |
| /* advance in line buffer, checking for overflow */ |
| if (cbytes < MAX_RESP_SIZE - 1) |
| cbytes++; |
| else |
| dev_warn(cs->dev, "response too large\n"); |
| } |
| |
| if (!numbytes) |
| break; |
| c = *src++; |
| --numbytes; |
| if (c == DLE_FLAG && |
| (cs->dle || inputstate & INS_DLE_command)) { |
| inputstate |= INS_DLE_char; |
| break; |
| } |
| } |
| |
| cs->cbytes = cbytes; |
| inbuf->inputstate = inputstate; |
| |
| return startbytes - numbytes; |
| } |
| |
| /* process a block of received bytes in lock mode (tty i/f) |
| * Return value: |
| * number of processed bytes |
| */ |
| static inline int lock_loop(unsigned char *src, int numbytes, |
| struct inbuf_t *inbuf) |
| { |
| struct cardstate *cs = inbuf->cs; |
| |
| gigaset_dbg_buffer(DEBUG_LOCKCMD, "received response", |
| numbytes, src); |
| gigaset_if_receive(cs, src, numbytes); |
| |
| return numbytes; |
| } |
| |
| /* process a block of received bytes in HDLC data mode |
| * Collect HDLC frames, undoing byte stuffing and watching for DLE escapes. |
| * When a frame is complete, check the FCS and pass valid frames to the LL. |
| * If DLE is encountered, return immediately to let the caller handle it. |
| * Return value: |
| * number of processed bytes |
| * numbytes (all bytes processed) on error --FIXME |
| */ |
| static inline int hdlc_loop(unsigned char c, unsigned char *src, int numbytes, |
| struct inbuf_t *inbuf) |
| { |
| struct cardstate *cs = inbuf->cs; |
| struct bc_state *bcs = inbuf->bcs; |
| int inputstate = bcs->inputstate; |
| __u16 fcs = bcs->fcs; |
| struct sk_buff *skb = bcs->skb; |
| unsigned char error; |
| struct sk_buff *compskb; |
| int startbytes = numbytes; |
| int l; |
| |
| if (unlikely(inputstate & INS_byte_stuff)) { |
| inputstate &= ~INS_byte_stuff; |
| goto byte_stuff; |
| } |
| for (;;) { |
| if (unlikely(c == PPP_ESCAPE)) { |
| if (unlikely(!numbytes)) { |
| inputstate |= INS_byte_stuff; |
| break; |
| } |
| c = *src++; |
| --numbytes; |
| if (unlikely(c == DLE_FLAG && |
| (cs->dle || |
| inbuf->inputstate & INS_DLE_command))) { |
| inbuf->inputstate |= INS_DLE_char; |
| inputstate |= INS_byte_stuff; |
| break; |
| } |
| byte_stuff: |
| c ^= PPP_TRANS; |
| if (unlikely(!muststuff(c))) |
| gig_dbg(DEBUG_HDLC, "byte stuffed: 0x%02x", c); |
| } else if (unlikely(c == PPP_FLAG)) { |
| if (unlikely(inputstate & INS_skip_frame)) { |
| #ifdef CONFIG_GIGASET_DEBUG |
| if (!(inputstate & INS_have_data)) { /* 7E 7E */ |
| ++bcs->emptycount; |
| } else |
| gig_dbg(DEBUG_HDLC, |
| "7e----------------------------"); |
| #endif |
| |
| /* end of frame */ |
| error = 1; |
| gigaset_rcv_error(NULL, cs, bcs); |
| } else if (!(inputstate & INS_have_data)) { /* 7E 7E */ |
| #ifdef CONFIG_GIGASET_DEBUG |
| ++bcs->emptycount; |
| #endif |
| break; |
| } else { |
| gig_dbg(DEBUG_HDLC, |
| "7e----------------------------"); |
| |
| /* end of frame */ |
| error = 0; |
| |
| if (unlikely(fcs != PPP_GOODFCS)) { |
| dev_err(cs->dev, |
| "Checksum failed, %u bytes corrupted!\n", |
| skb->len); |
| compskb = NULL; |
| gigaset_rcv_error(compskb, cs, bcs); |
| error = 1; |
| } else { |
| if (likely((l = skb->len) > 2)) { |
| skb->tail -= 2; |
| skb->len -= 2; |
| } else { |
| dev_kfree_skb(skb); |
| skb = NULL; |
| inputstate |= INS_skip_frame; |
| if (l == 1) { |
| dev_err(cs->dev, |
| "invalid packet size (1)!\n"); |
| error = 1; |
| gigaset_rcv_error(NULL, |
| cs, bcs); |
| } |
| } |
| if (likely(!(error || |
| (inputstate & |
| INS_skip_frame)))) { |
| gigaset_rcv_skb(skb, cs, bcs); |
| } |
| } |
| } |
| |
| if (unlikely(error)) |
| if (skb) |
| dev_kfree_skb(skb); |
| |
| fcs = PPP_INITFCS; |
| inputstate &= ~(INS_have_data | INS_skip_frame); |
| if (unlikely(bcs->ignore)) { |
| inputstate |= INS_skip_frame; |
| skb = NULL; |
| } else if (likely((skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN)) != NULL)) { |
| skb_reserve(skb, HW_HDR_LEN); |
| } else { |
| dev_warn(cs->dev, |
| "could not allocate new skb\n"); |
| inputstate |= INS_skip_frame; |
| } |
| |
| break; |
| } else if (unlikely(muststuff(c))) { |
| /* Should not happen. Possible after ZDLE=1<CR><LF>. */ |
| gig_dbg(DEBUG_HDLC, "not byte stuffed: 0x%02x", c); |
| } |
| |
| /* add character */ |
| |
| #ifdef CONFIG_GIGASET_DEBUG |
| if (unlikely(!(inputstate & INS_have_data))) { |
| gig_dbg(DEBUG_HDLC, "7e (%d x) ================", |
| bcs->emptycount); |
| bcs->emptycount = 0; |
| } |
| #endif |
| |
| inputstate |= INS_have_data; |
| |
| if (likely(!(inputstate & INS_skip_frame))) { |
| if (unlikely(skb->len == SBUFSIZE)) { |
| dev_warn(cs->dev, "received packet too long\n"); |
| dev_kfree_skb_any(skb); |
| skb = NULL; |
| inputstate |= INS_skip_frame; |
| break; |
| } |
| *__skb_put(skb, 1) = c; |
| fcs = crc_ccitt_byte(fcs, c); |
| } |
| |
| if (unlikely(!numbytes)) |
| break; |
| c = *src++; |
| --numbytes; |
| if (unlikely(c == DLE_FLAG && |
| (cs->dle || |
| inbuf->inputstate & INS_DLE_command))) { |
| inbuf->inputstate |= INS_DLE_char; |
| break; |
| } |
| } |
| bcs->inputstate = inputstate; |
| bcs->fcs = fcs; |
| bcs->skb = skb; |
| return startbytes - numbytes; |
| } |
| |
| /* process a block of received bytes in transparent data mode |
| * Invert bytes, undoing byte stuffing and watching for DLE escapes. |
| * If DLE is encountered, return immediately to let the caller handle it. |
| * Return value: |
| * number of processed bytes |
| * numbytes (all bytes processed) on error --FIXME |
| */ |
| static inline int iraw_loop(unsigned char c, unsigned char *src, int numbytes, |
| struct inbuf_t *inbuf) |
| { |
| struct cardstate *cs = inbuf->cs; |
| struct bc_state *bcs = inbuf->bcs; |
| int inputstate = bcs->inputstate; |
| struct sk_buff *skb = bcs->skb; |
| int startbytes = numbytes; |
| |
| for (;;) { |
| /* add character */ |
| inputstate |= INS_have_data; |
| |
| if (likely(!(inputstate & INS_skip_frame))) { |
| if (unlikely(skb->len == SBUFSIZE)) { |
| //FIXME just pass skb up and allocate a new one |
| dev_warn(cs->dev, "received packet too long\n"); |
| dev_kfree_skb_any(skb); |
| skb = NULL; |
| inputstate |= INS_skip_frame; |
| break; |
| } |
| *__skb_put(skb, 1) = bitrev8(c); |
| } |
| |
| if (unlikely(!numbytes)) |
| break; |
| c = *src++; |
| --numbytes; |
| if (unlikely(c == DLE_FLAG && |
| (cs->dle || |
| inbuf->inputstate & INS_DLE_command))) { |
| inbuf->inputstate |= INS_DLE_char; |
| break; |
| } |
| } |
| |
| /* pass data up */ |
| if (likely(inputstate & INS_have_data)) { |
| if (likely(!(inputstate & INS_skip_frame))) { |
| gigaset_rcv_skb(skb, cs, bcs); |
| } |
| inputstate &= ~(INS_have_data | INS_skip_frame); |
| if (unlikely(bcs->ignore)) { |
| inputstate |= INS_skip_frame; |
| skb = NULL; |
| } else if (likely((skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN)) |
| != NULL)) { |
| skb_reserve(skb, HW_HDR_LEN); |
| } else { |
| dev_warn(cs->dev, "could not allocate new skb\n"); |
| inputstate |= INS_skip_frame; |
| } |
| } |
| |
| bcs->inputstate = inputstate; |
| bcs->skb = skb; |
| return startbytes - numbytes; |
| } |
| |
| /** |
| * gigaset_m10x_input() - process a block of data received from the device |
| * @inbuf: received data and device descriptor structure. |
| * |
| * Called by hardware module {ser,usb}_gigaset with a block of received |
| * bytes. Separates the bytes received over the serial data channel into |
| * user data and command replies (locked/unlocked) according to the |
| * current state of the interface. |
| */ |
| void gigaset_m10x_input(struct inbuf_t *inbuf) |
| { |
| struct cardstate *cs; |
| unsigned tail, head, numbytes; |
| unsigned char *src, c; |
| int procbytes; |
| |
| head = inbuf->head; |
| tail = inbuf->tail; |
| gig_dbg(DEBUG_INTR, "buffer state: %u -> %u", head, tail); |
| |
| if (head != tail) { |
| cs = inbuf->cs; |
| src = inbuf->data + head; |
| numbytes = (head > tail ? RBUFSIZE : tail) - head; |
| gig_dbg(DEBUG_INTR, "processing %u bytes", numbytes); |
| |
| while (numbytes) { |
| if (cs->mstate == MS_LOCKED) { |
| procbytes = lock_loop(src, numbytes, inbuf); |
| src += procbytes; |
| numbytes -= procbytes; |
| } else { |
| c = *src++; |
| --numbytes; |
| if (c == DLE_FLAG && (cs->dle || |
| inbuf->inputstate & INS_DLE_command)) { |
| if (!(inbuf->inputstate & INS_DLE_char)) { |
| inbuf->inputstate |= INS_DLE_char; |
| goto nextbyte; |
| } |
| /* <DLE> <DLE> => <DLE> in data stream */ |
| inbuf->inputstate &= ~INS_DLE_char; |
| } |
| |
| if (!(inbuf->inputstate & INS_DLE_char)) { |
| |
| /* FIXME use function pointers? */ |
| if (inbuf->inputstate & INS_command) |
| procbytes = cmd_loop(c, src, numbytes, inbuf); |
| else if (inbuf->bcs->proto2 == ISDN_PROTO_L2_HDLC) |
| procbytes = hdlc_loop(c, src, numbytes, inbuf); |
| else |
| procbytes = iraw_loop(c, src, numbytes, inbuf); |
| |
| src += procbytes; |
| numbytes -= procbytes; |
| } else { /* DLE char */ |
| inbuf->inputstate &= ~INS_DLE_char; |
| switch (c) { |
| case 'X': /*begin of command*/ |
| if (inbuf->inputstate & INS_command) |
| dev_warn(cs->dev, |
| "received <DLE> 'X' in command mode\n"); |
| inbuf->inputstate |= |
| INS_command | INS_DLE_command; |
| break; |
| case '.': /*end of command*/ |
| if (!(inbuf->inputstate & INS_command)) |
| dev_warn(cs->dev, |
| "received <DLE> '.' in hdlc mode\n"); |
| inbuf->inputstate &= cs->dle ? |
| ~(INS_DLE_command|INS_command) |
| : ~INS_DLE_command; |
| break; |
| //case DLE_FLAG: /*DLE_FLAG in data stream*/ /* schon oben behandelt! */ |
| default: |
| dev_err(cs->dev, |
| "received 0x10 0x%02x!\n", |
| (int) c); |
| /* FIXME: reset driver?? */ |
| } |
| } |
| } |
| nextbyte: |
| if (!numbytes) { |
| /* end of buffer, check for wrap */ |
| if (head > tail) { |
| head = 0; |
| src = inbuf->data; |
| numbytes = tail; |
| } else { |
| head = tail; |
| break; |
| } |
| } |
| } |
| |
| gig_dbg(DEBUG_INTR, "setting head to %u", head); |
| inbuf->head = head; |
| } |
| } |
| EXPORT_SYMBOL_GPL(gigaset_m10x_input); |
| |
| |
| /* == data output ========================================================== */ |
| |
| /* Encoding of a PPP packet into an octet stuffed HDLC frame |
| * with FCS, opening and closing flags. |
| * parameters: |
| * skb skb containing original packet (freed upon return) |
| * head number of headroom bytes to allocate in result skb |
| * tail number of tailroom bytes to allocate in result skb |
| * Return value: |
| * pointer to newly allocated skb containing the result frame |
| */ |
| static struct sk_buff *HDLC_Encode(struct sk_buff *skb, int head, int tail) |
| { |
| struct sk_buff *hdlc_skb; |
| __u16 fcs; |
| unsigned char c; |
| unsigned char *cp; |
| int len; |
| unsigned int stuf_cnt; |
| |
| stuf_cnt = 0; |
| fcs = PPP_INITFCS; |
| cp = skb->data; |
| len = skb->len; |
| while (len--) { |
| if (muststuff(*cp)) |
| stuf_cnt++; |
| fcs = crc_ccitt_byte(fcs, *cp++); |
| } |
| fcs ^= 0xffff; /* complement */ |
| |
| /* size of new buffer: original size + number of stuffing bytes |
| * + 2 bytes FCS + 2 stuffing bytes for FCS (if needed) + 2 flag bytes |
| */ |
| hdlc_skb = dev_alloc_skb(skb->len + stuf_cnt + 6 + tail + head); |
| if (!hdlc_skb) { |
| dev_kfree_skb(skb); |
| return NULL; |
| } |
| skb_reserve(hdlc_skb, head); |
| |
| /* Copy acknowledge request into new skb */ |
| memcpy(hdlc_skb->head, skb->head, 2); |
| |
| /* Add flag sequence in front of everything.. */ |
| *(skb_put(hdlc_skb, 1)) = PPP_FLAG; |
| |
| /* Perform byte stuffing while copying data. */ |
| while (skb->len--) { |
| if (muststuff(*skb->data)) { |
| *(skb_put(hdlc_skb, 1)) = PPP_ESCAPE; |
| *(skb_put(hdlc_skb, 1)) = (*skb->data++) ^ PPP_TRANS; |
| } else |
| *(skb_put(hdlc_skb, 1)) = *skb->data++; |
| } |
| |
| /* Finally add FCS (byte stuffed) and flag sequence */ |
| c = (fcs & 0x00ff); /* least significant byte first */ |
| if (muststuff(c)) { |
| *(skb_put(hdlc_skb, 1)) = PPP_ESCAPE; |
| c ^= PPP_TRANS; |
| } |
| *(skb_put(hdlc_skb, 1)) = c; |
| |
| c = ((fcs >> 8) & 0x00ff); |
| if (muststuff(c)) { |
| *(skb_put(hdlc_skb, 1)) = PPP_ESCAPE; |
| c ^= PPP_TRANS; |
| } |
| *(skb_put(hdlc_skb, 1)) = c; |
| |
| *(skb_put(hdlc_skb, 1)) = PPP_FLAG; |
| |
| dev_kfree_skb(skb); |
| return hdlc_skb; |
| } |
| |
| /* Encoding of a raw packet into an octet stuffed bit inverted frame |
| * parameters: |
| * skb skb containing original packet (freed upon return) |
| * head number of headroom bytes to allocate in result skb |
| * tail number of tailroom bytes to allocate in result skb |
| * Return value: |
| * pointer to newly allocated skb containing the result frame |
| */ |
| static struct sk_buff *iraw_encode(struct sk_buff *skb, int head, int tail) |
| { |
| struct sk_buff *iraw_skb; |
| unsigned char c; |
| unsigned char *cp; |
| int len; |
| |
| /* worst case: every byte must be stuffed */ |
| iraw_skb = dev_alloc_skb(2*skb->len + tail + head); |
| if (!iraw_skb) { |
| dev_kfree_skb(skb); |
| return NULL; |
| } |
| skb_reserve(iraw_skb, head); |
| |
| cp = skb->data; |
| len = skb->len; |
| while (len--) { |
| c = bitrev8(*cp++); |
| if (c == DLE_FLAG) |
| *(skb_put(iraw_skb, 1)) = c; |
| *(skb_put(iraw_skb, 1)) = c; |
| } |
| dev_kfree_skb(skb); |
| return iraw_skb; |
| } |
| |
| /** |
| * gigaset_m10x_send_skb() - queue an skb for sending |
| * @bcs: B channel descriptor structure. |
| * @skb: data to send. |
| * |
| * Called by i4l.c to encode and queue an skb for sending, and start |
| * transmission if necessary. |
| * |
| * Return value: |
| * number of bytes accepted for sending (skb->len) if ok, |
| * error code < 0 (eg. -ENOMEM) on error |
| */ |
| int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb) |
| { |
| unsigned len = skb->len; |
| unsigned long flags; |
| |
| if (bcs->proto2 == ISDN_PROTO_L2_HDLC) |
| skb = HDLC_Encode(skb, HW_HDR_LEN, 0); |
| else |
| skb = iraw_encode(skb, HW_HDR_LEN, 0); |
| if (!skb) { |
| dev_err(bcs->cs->dev, |
| "unable to allocate memory for encoding!\n"); |
| return -ENOMEM; |
| } |
| |
| skb_queue_tail(&bcs->squeue, skb); |
| spin_lock_irqsave(&bcs->cs->lock, flags); |
| if (bcs->cs->connected) |
| tasklet_schedule(&bcs->cs->write_tasklet); |
| spin_unlock_irqrestore(&bcs->cs->lock, flags); |
| |
| return len; /* ok so far */ |
| } |
| EXPORT_SYMBOL_GPL(gigaset_m10x_send_skb); |