| /* |
| * Copyright Altera Corporation (C) 2014. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "skeleton.dtsi" |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| ethernet0 = &gmac0; |
| ethernet1 = &gmac1; |
| ethernet2 = &gmac2; |
| serial0 = &uart0; |
| serial1 = &uart1; |
| timer0 = &timer0; |
| timer1 = &timer1; |
| timer2 = &timer2; |
| timer3 = &timer3; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "arm,cortex-a9"; |
| device_type = "cpu"; |
| reg = <0>; |
| next-level-cache = <&L2>; |
| }; |
| cpu@1 { |
| compatible = "arm,cortex-a9"; |
| device_type = "cpu"; |
| reg = <1>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| intc: intc@ffffd000 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0xffffd000 0x1000>, |
| <0xffffc100 0x100>; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| device_type = "soc"; |
| interrupt-parent = <&intc>; |
| ranges; |
| |
| amba { |
| compatible = "arm,amba-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| pdma: pdma@ffda1000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0xffda1000 0x1000>; |
| interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>, |
| <0 84 IRQ_TYPE_LEVEL_HIGH>, |
| <0 85 IRQ_TYPE_LEVEL_HIGH>, |
| <0 86 IRQ_TYPE_LEVEL_HIGH>, |
| <0 87 IRQ_TYPE_LEVEL_HIGH>, |
| <0 88 IRQ_TYPE_LEVEL_HIGH>, |
| <0 89 IRQ_TYPE_LEVEL_HIGH>, |
| <0 90 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| }; |
| }; |
| |
| clkmgr@ffd04000 { |
| compatible = "altr,clk-mgr"; |
| reg = <0xffd04000 0x1000>; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| osc1: osc1 { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| }; |
| |
| main_pll: main_pll { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-pll-clock"; |
| clocks = <&osc1>; |
| }; |
| |
| periph_pll: periph_pll { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #clock-cells = <0>; |
| compatible = "altr,socfpga-pll-clock"; |
| clocks = <&osc1>; |
| }; |
| }; |
| }; |
| |
| gmac0: ethernet@ff800000 { |
| compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; |
| reg = <0xff800000 0x2000>; |
| interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq"; |
| /* Filled in by bootloader */ |
| mac-address = [00 00 00 00 00 00]; |
| status = "disabled"; |
| }; |
| |
| gmac1: ethernet@ff802000 { |
| compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; |
| reg = <0xff802000 0x2000>; |
| interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq"; |
| /* Filled in by bootloader */ |
| mac-address = [00 00 00 00 00 00]; |
| status = "disabled"; |
| }; |
| |
| gmac2: ethernet@ff804000 { |
| compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; |
| reg = <0xff804000 0x2000>; |
| interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq"; |
| /* Filled in by bootloader */ |
| mac-address = [00 00 00 00 00 00]; |
| status = "disabled"; |
| }; |
| |
| gpio0: gpio@ffc02900 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,dw-apb-gpio"; |
| reg = <0xffc02900 0x100>; |
| status = "disabled"; |
| |
| porta: gpio-controller@0 { |
| compatible = "snps,dw-apb-gpio-port"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| snps,nr-gpios = <29>; |
| reg = <0>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| gpio1: gpio@ffc02a00 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,dw-apb-gpio"; |
| reg = <0xffc02a00 0x100>; |
| status = "disabled"; |
| |
| portb: gpio-controller@0 { |
| compatible = "snps,dw-apb-gpio-port"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| snps,nr-gpios = <29>; |
| reg = <0>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| gpio2: gpio@ffc02b00 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,dw-apb-gpio"; |
| reg = <0xffc02b00 0x100>; |
| status = "disabled"; |
| |
| portc: gpio-controller@0 { |
| compatible = "snps,dw-apb-gpio-port"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| snps,nr-gpios = <27>; |
| reg = <0>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| i2c0: i2c@ffc02200 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0xffc02200 0x100>; |
| interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@ffc02300 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0xffc02300 0x100>; |
| interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@ffc02400 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0xffc02400 0x100>; |
| interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@ffc02500 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0xffc02500 0x100>; |
| interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@ffc02600 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0xffc02600 0x100>; |
| interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| L2: l2-cache@fffff000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0xfffff000 0x1000>; |
| interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| |
| mmc: dwmmc0@ff808000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "altr,socfpga-dw-mshc"; |
| reg = <0xff808000 0x1000>; |
| interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; |
| fifo-depth = <0x400>; |
| }; |
| |
| ocram: sram@ffe00000 { |
| compatible = "mmio-sram"; |
| reg = <0xffe00000 0x40000>; |
| }; |
| |
| rst: rstmgr@ffd05000 { |
| #reset-cells = <1>; |
| compatible = "altr,rst-mgr"; |
| reg = <0xffd05000 0x100>; |
| }; |
| |
| sysmgr: sysmgr@ffd06000 { |
| compatible = "altr,sys-mgr", "syscon"; |
| reg = <0xffd06000 0x300>; |
| }; |
| |
| /* Local timer */ |
| timer@ffffc600 { |
| compatible = "arm,cortex-a9-twd-timer"; |
| reg = <0xffffc600 0x100>; |
| interrupts = <1 13 0xf04>; |
| }; |
| |
| timer0: timer0@ffc02700 { |
| compatible = "snps,dw-apb-timer"; |
| interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xffc02700 0x100>; |
| }; |
| |
| timer1: timer1@ffc02800 { |
| compatible = "snps,dw-apb-timer"; |
| interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xffc02800 0x100>; |
| }; |
| |
| timer2: timer2@ffd00000 { |
| compatible = "snps,dw-apb-timer"; |
| interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xffd00000 0x100>; |
| }; |
| |
| timer3: timer3@ffd00100 { |
| compatible = "snps,dw-apb-timer"; |
| interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xffd01000 0x100>; |
| }; |
| |
| uart0: serial0@ffc02000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0xffc02000 0x100>; |
| interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| }; |
| |
| uart1: serial1@ffc02100 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0xffc02100 0x100>; |
| interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| }; |
| |
| usbphy0: usbphy@0 { |
| #phy-cells = <0>; |
| compatible = "usb-nop-xceiv"; |
| status = "okay"; |
| }; |
| |
| usb0: usb@ffb00000 { |
| compatible = "snps,dwc2"; |
| reg = <0xffb00000 0xffff>; |
| interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&usbphy0>; |
| phy-names = "usb2-phy"; |
| status = "disabled"; |
| }; |
| |
| usb1: usb@ffb40000 { |
| compatible = "snps,dwc2"; |
| reg = <0xffb40000 0xffff>; |
| interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&usbphy0>; |
| phy-names = "usb2-phy"; |
| status = "disabled"; |
| }; |
| |
| watchdog0: watchdog@ffd00200 { |
| compatible = "snps,dw-wdt"; |
| reg = <0xffd00200 0x100>; |
| interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| watchdog1: watchdog@ffd00300 { |
| compatible = "snps,dw-wdt"; |
| reg = <0xffd00300 0x100>; |
| interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| }; |
| }; |