[POWERPC] 4xx: Fix L1 cache size in katmai DTS
This patch changes the katmai (440SPe) L1 cache size to 32k. Some
whitespace issues are cleaned up too.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index bc32ac7..fc86e5a 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -38,8 +38,8 @@
timebase-frequency = <0>; /* Filled in by zImage */
i-cache-line-size = <20>;
d-cache-line-size = <20>;
- i-cache-size = <20000>;
- d-cache-size = <20000>;
+ i-cache-size = <8000>;
+ d-cache-size = <8000>;
dcr-controller;
dcr-access-method = "native";
};
@@ -136,11 +136,11 @@
};
POB0: opb {
- compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
+ compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <00000000 4 e0000000 20000000>;
- clock-frequency = <0>; /* Filled in by zImage */
+ ranges = <00000000 4 e0000000 20000000>;
+ clock-frequency = <0>; /* Filled in by zImage */
EBC0: ebc {
compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
@@ -153,38 +153,38 @@
};
UART0: serial@10000200 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <10000200 8>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <10000200 8>;
virtual-reg = <a0000200>;
- clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <1c200>;
- interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
- };
+ clock-frequency = <0>; /* Filled in by zImage */
+ current-speed = <1c200>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0 4>;
+ };
UART1: serial@10000300 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <10000300 8>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <10000300 8>;
virtual-reg = <a0000300>;
- clock-frequency = <0>;
- current-speed = <0>;
- interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
- };
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <1 4>;
+ };
UART2: serial@10000600 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <10000600 8>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <10000600 8>;
virtual-reg = <a0000600>;
- clock-frequency = <0>;
- current-speed = <0>;
- interrupt-parent = <&UIC1>;
- interrupts = <5 4>;
- };
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <5 4>;
+ };
IIC0: i2c@10000400 {
compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";